-
Fracture Characteristics of Rare-earth Phosphate under Molten Calcium Magnesium Aluminosilicate Corrosion
Authors:
Subrato Sarkar,
Rahul Rahul,
Bishnu Pada Majee,
Keith Bryce,
Lucy Zhang,
Li** Huang,
Jie Lian,
Suvranu De
Abstract:
The fracture characteristics of LuPO4 rare-earth phosphate environmental barrier coating (EBC) material under molten calcium-magnesium aluminosilicate (CMAS) corrosion is quantified. EBCs are crucial for protecting SiC-based ceramic matrix composite components in the hot section of gas turbine engines. Recent research has highlighted the potential of rare-earth phosphates as better EBC materials t…
▽ More
The fracture characteristics of LuPO4 rare-earth phosphate environmental barrier coating (EBC) material under molten calcium-magnesium aluminosilicate (CMAS) corrosion is quantified. EBCs are crucial for protecting SiC-based ceramic matrix composite components in the hot section of gas turbine engines. Recent research has highlighted the potential of rare-earth phosphates as better EBC materials than third-generation rare-earth silicates for CMAS corrosion resistance. However, the fracture of EBCs under CMAS corrosion during service remains a significant concern. This work investigates the fracture behavior of LuPO4 using mesoscale simulation and experiments. The model uses micrographs taken from fabricated EBC samples for mesoscale fracture simulations. The simulation results are compared with experimental fracture toughness data and validated using statistical tests (p<0.01). The simulation results and experimental observations demonstrate that LuPO4 may exhibit higher fracture resistance than Lu2SiO5 rare-earth silicate under similar CMAS corrosion conditions, offering potential insights for future EBC design and development.
△ Less
Submitted 1 July, 2024;
originally announced July 2024.
-
First-principles molten salt phase diagrams through thermodynamic integration
Authors:
Tanooj Shah,
Kamron Fazel,
Jie Lian,
Li** Huang,
Yunfeng Shi,
Ravishankar Sundararaman
Abstract:
Precise prediction of phase diagrams in molecular dynamics (MD) simulations is challenging due to the simultaneous need for long time scales, large length scales and accurate interatomic potentials. We show that thermodynamic integration (TI) from low-cost force fields to neural network potentials (NNPs) trained using density-functional theory (DFT) enables rapid first-principles prediction of the…
▽ More
Precise prediction of phase diagrams in molecular dynamics (MD) simulations is challenging due to the simultaneous need for long time scales, large length scales and accurate interatomic potentials. We show that thermodynamic integration (TI) from low-cost force fields to neural network potentials (NNPs) trained using density-functional theory (DFT) enables rapid first-principles prediction of the solid-liquid phase boundary in the model salt NaCl. We use this technique to compare the accuracy of several DFT exchange-correlation functionals for predicting the NaCl phase boundary, and find that the inclusion of dispersion interactions is critical to obtain good agreement with experiment. Importantly, our approach introduces a method to predict solid-liquid phase boundaries for any material at an ab-initio level of accuracy, with the majority of the computational cost at the level of classical potentials.
△ Less
Submitted 4 June, 2023;
originally announced June 2023.
-
Layer-dependent Optical and Dielectric Properties of Large-size PdSe$_2$ Films Grown by Chemical Vapor Deposition
Authors:
MingYang Wei,
Jie Lian,
Yu Zhang,
ChenLin Wang,
Yueming Wang,
Zhen Xu
Abstract:
Palladium diselenide (PdSe$_2$), a new type of two-dimensional noble metal dihalides (NMDCs), has received widespread attention for its excellent electrical and optoelectronic properties. Herein, high-quality continuous centimeter-scale PdSe$_2$ films with layers in the range of 3L-15L were grown using Chemical Vapor Deposition (CVD) method. The absorption spectra and DFT calculations revealed tha…
▽ More
Palladium diselenide (PdSe$_2$), a new type of two-dimensional noble metal dihalides (NMDCs), has received widespread attention for its excellent electrical and optoelectronic properties. Herein, high-quality continuous centimeter-scale PdSe$_2$ films with layers in the range of 3L-15L were grown using Chemical Vapor Deposition (CVD) method. The absorption spectra and DFT calculations revealed that the bandgap of the PdSe$_2$ films decreased with increasing number of layers, which is due to PdSe$_2$ enhancement of orbital hybridization. Spectroscopic ellipsometry (SE) analysis shows that PdSe2 has significant layer-dependent optical and dielectric properties. This is mainly due to the unique strong exciton effect of the thin PdSe$_2$ film in the UV band. In particular, the effect of temperature on the optical properties of PdSe$_2$ films was also observed, and the thermo-optical coefficients of PdSe$_2$ films with different number of layers were calculated. This study provides fundamental guidance for the fabrication and optimization of PdSe$_2$-based optoelectronic devices.
△ Less
Submitted 3 September, 2021;
originally announced September 2021.
-
The grain-size effect on thermal conductivity of uranium dioxide
Authors:
K. Shrestha,
T. Yao,
J. Lian,
D. Antonio,
M. Sessim,
M. R. Tonks,
K. Gofryk
Abstract:
We have investigated the grain boundary scattering effect on the thermal transport behavior of uranium dioxide (UO$_2$). The polycrystalline samples having different grain-sizes (0.125, 1.8, and 7.2 $μ$m) have been prepared by spark plasma sintering technique and characterized by x-ray powder diffraction (XRD), scanning electron microscope (SEM), and Raman spectroscopy. The thermal transport prope…
▽ More
We have investigated the grain boundary scattering effect on the thermal transport behavior of uranium dioxide (UO$_2$). The polycrystalline samples having different grain-sizes (0.125, 1.8, and 7.2 $μ$m) have been prepared by spark plasma sintering technique and characterized by x-ray powder diffraction (XRD), scanning electron microscope (SEM), and Raman spectroscopy. The thermal transport properties (the thermal conductivity and thermoelectric power) have been measured in the temperature range 2-300~K and the results were analyzed in terms of various physical parameters contributing to the thermal conductivity in these materials in relation to grain-size. We show that thermal conductivity decreases systematically with lowering grain-size in the temperatures below 30 K, where the boundary scattering dominates the thermal transport. At higher temperatures more scattering processes are involved in the heat transport in these materials, making the analysis difficult. We determined the grain boundary Kapitza resistance that would result in the observed increase in thermal conductivity with grain size, and compared the value with Kapitza resistances calculated for UO$_2$ using molecular dynamics from the literature.
△ Less
Submitted 17 October, 2019;
originally announced October 2019.
-
Temperature-induced atomic-structure modifications in UO$_{2}$ and UO$_{2+x}$
Authors:
Raul I. Palomares,
Jennifer E. Szymanowski,
Tiankai Yao,
Joerg Neuefeind,
Ginger E. Sigmon,
Jie Lian,
Maik Lang
Abstract:
UO$_{2}$ and UO$_{2.07}$ were characterized from 25-1000$\,^{\circ}\mathrm{C}$ using neutron total scattering in order to evaluate effects of temperature and phase boundaries on local and average structures. Analyses of unit cell parameters showed that both materials exhibit very similar thermal expansion behavior and thermal expansion data lay along the upper bound of uncertainty for standard emp…
▽ More
UO$_{2}$ and UO$_{2.07}$ were characterized from 25-1000$\,^{\circ}\mathrm{C}$ using neutron total scattering in order to evaluate effects of temperature and phase boundaries on local and average structures. Analyses of unit cell parameters showed that both materials exhibit very similar thermal expansion behavior and thermal expansion data lay along the upper bound of uncertainty for standard empirical models, indicating a slightly faster thermal expansion rate. Atomic displacement parameters of UO$_{2.07}$ showed evidence for U$_{4}$O$_{9}$ phase boundaries in accordance with the established phase diagram, despite the suppression of U$_{4}$O$_{9}$ superlattice peaks in the measured diffraction patterns. Pair distribution functions revealed that the differences in local structure between UO$_{2}$ and UO$_{2.07}$ were very small and PDF features are dominated by thermal effects. The rate of contraction of the first nearest-neighbor U-O distances of UO$_{2}$ and UO$_{2.07}$ between 25-1000$\,^{\circ}\mathrm{C}$ were shown to agree with molecular dynamics simulations and local structure analyses previously performed on UO$_{2}$ above 1000$\,^{\circ}\mathrm{C}$.
△ Less
Submitted 3 May, 2019;
originally announced May 2019.
-
Exotic Node Line in ternary MgSrSi-type crystals
Authors:
**ling Lian,
Lixian Yu,
Qi-Feng Liang,
Jian Zhou,
Rui Yu,
Hongming Weng
Abstract:
Node line (NL) band-touchings protected by mirror symmetry (named as $m$-NL), the product of inversion and time reversal symmetry $\mathcal{S=PT}$ ($s$-NL), or nonsymmorphic symmetry are nontrivial topological objects of topological semimetals (SMs) in the Brillouin Zone (BZ). In this work, we screened the family of MgSrSi-type crystals using first principles calculations, and discovered that more…
▽ More
Node line (NL) band-touchings protected by mirror symmetry (named as $m$-NL), the product of inversion and time reversal symmetry $\mathcal{S=PT}$ ($s$-NL), or nonsymmorphic symmetry are nontrivial topological objects of topological semimetals (SMs) in the Brillouin Zone (BZ). In this work, we screened the family of MgSrSi-type crystals using first principles calculations, and discovered that more than 70 members are NLSMs. A new type of multi-loop structure was found in AsRhTi that a $s$-NL touches robustly with a $m$-NL at some "nexus point", and in the meanwhile a second $m$-NL crosses with the $s$-NL to form a Hopf-link. Unlike the previously proposed Hopf-link formed by two $s$-NLs or two $m$-NLs, a Hopf-link formed by a $s$-NL and a $m$-NL requires a minimal three-band model to characterize its essential electronic structure. The associated topological surface states on different surfaces of AsRhTi crystal were also obtained. Even more complicated and exotic multi-loop structure of NLs were predicted in AsFeNa and PNiNb. Our work may shed light on search for exotic multi-loop NLSMs in real materials.
△ Less
Submitted 17 July, 2018;
originally announced July 2018.
-
Measurement of the linear thermo-optical coefficient of Ga$_{0.51}$In$_{0.49}$P using photonic crystal nanocavities
Authors:
Sergei Sokolov,
** Lian,
Sylvain Combrié,
Alfredo De Rossi,
Allard P. Mosk
Abstract:
Ga$_{0.51}$In$_{0.49}$P is a promising candidate for thermally tunable nanophotonic devices due to its low thermal conductivity. In this work we study its thermo-optical response. We obtain the linear thermo-optical coefficient $dn/dT=2.0\pm0.3\cdot 10^{-4}\,\rm{K}^{-1}$ by investigating the transmission properties of a single mode-gap photonic crystal nanocavity.
Ga$_{0.51}$In$_{0.49}$P is a promising candidate for thermally tunable nanophotonic devices due to its low thermal conductivity. In this work we study its thermo-optical response. We obtain the linear thermo-optical coefficient $dn/dT=2.0\pm0.3\cdot 10^{-4}\,\rm{K}^{-1}$ by investigating the transmission properties of a single mode-gap photonic crystal nanocavity.
△ Less
Submitted 11 April, 2017; v1 submitted 16 December, 2016;
originally announced December 2016.
-
Fano lines in the reflection spectrum of directly coupled systems of waveguides and cavities: measurements, modeling and manipulation of the Fano asymmetry
Authors:
** Lian,
Sergei Sokolov,
Emre Yüce,
Sylvain Combrié,
Alfredo De Rossi,
Allard P. Mosk
Abstract:
We measure and analyze reflection spectra of directly coupled systems of waveguides and cavities. The observed Fano lines offer insight in the reflection and coupling processes. Very different from side-coupled systems, the observed Fano line shape is not caused by the termini of the waveguide, but the coupling process between the measurement device fiber and the waveguide. Our experimental result…
▽ More
We measure and analyze reflection spectra of directly coupled systems of waveguides and cavities. The observed Fano lines offer insight in the reflection and coupling processes. Very different from side-coupled systems, the observed Fano line shape is not caused by the termini of the waveguide, but the coupling process between the measurement device fiber and the waveguide. Our experimental results and analytical model show that the Fano parameter that describes the Fano line shape is very sensitive to the coupling condition. A movement of the fiber well below the Rayleigh range can lead to a drastic change of the Fano line shape.
△ Less
Submitted 27 June, 2017; v1 submitted 26 October, 2016;
originally announced October 2016.
-
Tuning out disorder-induced localization in nanophotonic cavity arrays
Authors:
Sergei Sokolov,
** Lian,
Emre Yüce,
Sylvain Combrié,
Alfredo De Rossi,
Allard P. Mosk
Abstract:
Weakly coupled high-Q nanophotonic cavities are building blocks of slow-light waveguides and other nanophotonic devices. Their functionality critically depends on tuning as resonance frequencies should stay within the bandwidth of the device. Unavoidable disorder leads to random frequency shifts which cause localization of the light in single cavities. We present a new method to finely tune indivi…
▽ More
Weakly coupled high-Q nanophotonic cavities are building blocks of slow-light waveguides and other nanophotonic devices. Their functionality critically depends on tuning as resonance frequencies should stay within the bandwidth of the device. Unavoidable disorder leads to random frequency shifts which cause localization of the light in single cavities. We present a new method to finely tune individual resonances of light in a system of coupled nanocavities. We use holographic laser-induced heating and address thermal crosstalk between nanocavities using a response matrix approach. As a main result we observe a simultaneous anticrossing of 3 nanophotonic resonances, which were initially split by disorder.
△ Less
Submitted 11 April, 2017; v1 submitted 3 August, 2016;
originally announced August 2016.
-
Two-Dimensional Van der Waals Epitaxy Kinetics in a Three-Dimensional Perovskite Halide
Authors:
Yi** Wang,
Yunfeng Shi,
Guoqing Xin,
Jie Lian,
Jian Shi
Abstract:
The exploration of emerging materials physics and prospective applications of two-dimensional materials greatly relies on the growth control of their thickness, phases, morphologies and film-substrate interactions. Though substantial progresses have been made for the development of two-dimensional films from conventional layered bulky materials, particular challenges remain on obtaining ultrathin,…
▽ More
The exploration of emerging materials physics and prospective applications of two-dimensional materials greatly relies on the growth control of their thickness, phases, morphologies and film-substrate interactions. Though substantial progresses have been made for the development of two-dimensional films from conventional layered bulky materials, particular challenges remain on obtaining ultrathin, single crystalline, dislocation-free films from intrinsically non-Van der Waals-type three-dimensional materials. In this report, with the successful demonstration of single crystalline ultrathin large scale perovskite halide material, we reveal and identify the favorable role of weak Van der Waals film-substrate interaction on the nucleation and growth of the two-dimensional morphology out of non-layered materials compared to conventional epitaxy. We also show how the bonding nature of the three-dimensional material itself affects the kinetic energy landscape of ultrathin films growth. By studying the formation of fractal perovskites assisted with Monte Carlo simulations, we demonstrate that the competition between the Van der Waals diffusion and surface free energy of the perovskite leads to film thickening, suggesting extra strategies such as surface passivation may be needed for the growth of monolayer and a few layers films.
△ Less
Submitted 27 September, 2015;
originally announced September 2015.
-
Local thermal resonance control of GaInP photonic crystal membrane cavities using ambient gas cooling
Authors:
Sergei Sokolov,
** Lian,
Emre Yüce,
Sylvain Combrié,
Gaelle Lehoucq,
Alfredo De Rossi,
Allard P. Mosk
Abstract:
We perform spatially dependent tuning of a GaInP photonic crystal cavity using a continuous wave violet laser. Local tuning is obtained by laser heating of the photonic crystal membrane. The cavity resonance shift is measured for different pump positions and for two ambient gases: helium and nitrogen. We find that the width of the temperature profile induced in the membrane depends strongly on the…
▽ More
We perform spatially dependent tuning of a GaInP photonic crystal cavity using a continuous wave violet laser. Local tuning is obtained by laser heating of the photonic crystal membrane. The cavity resonance shift is measured for different pump positions and for two ambient gases: helium and nitrogen. We find that the width of the temperature profile induced in the membrane depends strongly on the thermal conductivity of the ambient gas. For He gas a narrow spatial width of the temperature profile of 2.8 um is predicted and verified in experiment.
△ Less
Submitted 4 May, 2015; v1 submitted 6 March, 2015;
originally announced March 2015.
-
Colloidal pattern replication through contact photolithography operated in a "Talbot-Fabry-Perot" regime
Authors:
Aline Emplit,
Jian Xiang Lian,
Isabelle Huynen,
Alexandru Vlad,
Michael Sarrazin
Abstract:
We detail on a continuous colloidal pattern replication by using contact photolithography. Chrome on quartz masks are fabricated using colloidal nanosphere lithography and subsequently used as photolithography stamps. Hexagonal pattern arrangements with different dimensions (980, 620 and 480 nm, using colloidal particles with respective diameters) have been studied. When the mask and the imaged re…
▽ More
We detail on a continuous colloidal pattern replication by using contact photolithography. Chrome on quartz masks are fabricated using colloidal nanosphere lithography and subsequently used as photolithography stamps. Hexagonal pattern arrangements with different dimensions (980, 620 and 480 nm, using colloidal particles with respective diameters) have been studied. When the mask and the imaged resist layer were in intimate contact, a high fidelity pattern replica was obtained after photolithography exposure and processing. In turn, the presence of an air-gap in between has been found to affect the projected image onto the photoresist layer, strongly dependent on the mask feature size and air-gap height. Pattern replication, inversion and hybridization was achieved for 980 nm-period mask; no hybridization for the 620 nm; and only pattern replication for the 480 nm. These results are interpreted in the framework of a "Talbot-Fabry-Perot" effect. Numerical simulations corroborate with the experimental findings providing insight into the involved processes highlighting the important parameters affecting the exposure pattern. The approach allows complex subwavelength patterning and is relevant for a 3D layer-by-layer printing.
△ Less
Submitted 13 February, 2014;
originally announced February 2014.
-
Thermodynamics of spin-orbit-coupled Bose-Einstein condensates
Authors:
**ling Lian,
Yuanwei Zhang,
J. -Q. Liang,
Jie Ma,
Gang Chen,
Suotang Jia
Abstract:
In this paper we develop a quantum field approach to reveal the thermodynamic properties of the trapped BEC with the equal Rashba and Dresselhaus spin-orbit couplings. In the experimentally-feasible regime, the phase transition from the separate phase to the single minimum phase can be well driven by the tunable temperature. Moreover, the critical temperature, which is independent of the trapped p…
▽ More
In this paper we develop a quantum field approach to reveal the thermodynamic properties of the trapped BEC with the equal Rashba and Dresselhaus spin-orbit couplings. In the experimentally-feasible regime, the phase transition from the separate phase to the single minimum phase can be well driven by the tunable temperature. Moreover, the critical temperature, which is independent of the trapped potential, can be derived exactly. At the critical point, the specific heat has a large jump and can be thus regarded as a promising candidate to detect this temperature-driven phase transition. In addition, we obtain the analytical expressions for the specific heat and the entropy in the different phases. In the single minimum phase, the specific heat as well as the entropy are governed only by the Rabi frequency. However, in the separate phase with lower temperature, we find that they are determined only by the strength of spin-orbit coupling. Finally, the effect of the effective atom interaction is also addressed. In the separate phase, this effective atom interaction affects dramatically on the critical temperature and the corresponding thermodynamic properties.
△ Less
Submitted 3 September, 2012;
originally announced September 2012.
-
Finite temperature Dicke phase transition of a Bose-Einstein condensate in an optical cavity
Authors:
Yuanwei Zhang,
**ling Lian,
J. -Q. Liang,
Gang Chen,
Chuanwei Zhang,
Suotang Jia
Abstract:
Dicke model predicts a quantum phase transition from normal to superradiant phases for a two-level atomic ensemble coupled with an optical cavity at zero temperature. In a recent pioneer experiment [Nature 464, 1301 (2010)], such a phase transition has been observed using a Bose-Einstein condensate (BEC) in an optical cavity. Compared with the original Dicke model, the experimental system features…
▽ More
Dicke model predicts a quantum phase transition from normal to superradiant phases for a two-level atomic ensemble coupled with an optical cavity at zero temperature. In a recent pioneer experiment [Nature 464, 1301 (2010)], such a phase transition has been observed using a Bose-Einstein condensate (BEC) in an optical cavity. Compared with the original Dicke model, the experimental system features finite temperature and strong atom-photon nonlinear interaction in BEC. In this Letter, we develop a finite temperature theory for the Dicke phase transition of a BEC in an optical cavity, taking into account the atom-photon nonlinear interaction. In addition to explaining the experimentally observed transition from normal to superradiant phases at finite-temperature, we point it out that a new phase, the coexistence of normal and superradient phases, was also observed in the experiment. We show rich finite temperature phase diagrams existing in the experimental system by tuning various experimental parameters. We find that the specific heat of the BEC can serve as a powerful tool for probing various phases.
△ Less
Submitted 18 February, 2012;
originally announced February 2012.
-
Geometric phase in the Kitaev honeycomb model and scaling behavior at critical points
Authors:
**ling Lian,
J. -Q. Liang,
Gang Chen
Abstract:
In this paper a geometric phase of the Kitaev honeycomb model is derived and proposed to characterize the topological quantum phase transition. The simultaneous rotation of two spins is crucial to generate the geometric phase for the multi-spin in a unit-cell unlike the one-spin case. It is found that the ground-state geometric phase, which is non-analytic at the critical points, possesses zigzagg…
▽ More
In this paper a geometric phase of the Kitaev honeycomb model is derived and proposed to characterize the topological quantum phase transition. The simultaneous rotation of two spins is crucial to generate the geometric phase for the multi-spin in a unit-cell unlike the one-spin case. It is found that the ground-state geometric phase, which is non-analytic at the critical points, possesses zigzagging behavior in the gapless $B$ phase of non-Abelian anyon excitations, but is a smooth function in the gapped $A$ phase. Furthermore, the finite-size scaling behavior of the non-analytic geometric phase along with its first- and second-order partial derivatives in the vicinity of critical points is shown to exhibit the universality. The divergent second-order derivative of geometric phase in the thermodynamic limit indicates the typical second-order phase transition and thus the topological quantum phase transition can be well described in terms of the geometric-phase.
△ Less
Submitted 22 October, 2011;
originally announced October 2011.
-
Macroscopic Quantum States and Quantum Phase Transition in Dicke Models of Arbitrary Atom-Number
Authors:
**ling Lian,
Yuanwei Zhang,
J. -Q. Liang
Abstract:
The energy spectrum of Dicke Hamiltonians with and without the rotating wave approximation for arbitrary atom-number is obtained analytically with the variational method, in which the effective pseudo-spin Hamiltonian resulted from the expectation value in the boson-field coherent state is diagonalized by the spin-coherent-state transformation. In addition to the ground-state energy an excited mac…
▽ More
The energy spectrum of Dicke Hamiltonians with and without the rotating wave approximation for arbitrary atom-number is obtained analytically with the variational method, in which the effective pseudo-spin Hamiltonian resulted from the expectation value in the boson-field coherent state is diagonalized by the spin-coherent-state transformation. In addition to the ground-state energy an excited macroscopic quantum-state is found corresponding to the south-and-north-pole gauges of the spin-coherent states respectively. Our results of ground-state energies in exact agreement with various approaches show that these models exhibit a zero-temperature quantum phase transition of second-order for any number of atoms, which however was commonly considered as a phenomenon of the thermodynamic limit with the atom-number tending to infinite. The critical behavior of geometric phase is analyzed, which displays no singularity at the critical point.
△ Less
Submitted 22 November, 2011; v1 submitted 17 October, 2011;
originally announced October 2011.
-
Light-shift-induced quantum phase transitions of a Bose-Einstein condensate in the optical cavities
Authors:
Ni Liu,
**ling Lian,
Jie Ma,
Liantuan Xiao,
Gang Chen,
J. -Q. Liang,
Suotang Jia
Abstract:
In this paper we reveal the rich ground-state properties induced by the strong nonlinear atom-photon interaction, which has been found in the recent experiment about a Bose-Einstein condensate coupling with a high-finesse cavity [Nature (London) 464, 1301 (2010)]. Two detuning-dependent phase diagrams are revealed by investigating the experimentally-measurable atomic population. In particular, two…
▽ More
In this paper we reveal the rich ground-state properties induced by the strong nonlinear atom-photon interaction, which has been found in the recent experiment about a Bose-Einstein condensate coupling with a high-finesse cavity [Nature (London) 464, 1301 (2010)]. Two detuning-dependent phase diagrams are revealed by investigating the experimentally-measurable atomic population. In particular, two new quantum phase transitions from the superradiant phase or the normal phase to a dynamically-unstable phase are predicted in the blue detuning, and moreover, the three-phase coexistence points are found. It is also demonstrated that these predicted quantum phase transitions are the intrinsic transitions governed only by the second-order derivative of the ground-state energy. Finally, we also point out that the region involving coexistence of the superradiant phase and the normal phase predicted before can not happen in the ground state.
△ Less
Submitted 18 July, 2011;
originally announced July 2011.
-
Confirmation of room-temperature long range magnetic order in GaN:Mn
Authors:
Y. H. Zhang,
Z. Y. Lin,
F. F. Zhang,
X. L. Yang,
D. Li,
Z. T. Chen,
G. J. Lian,
Y. Z. Qian,
X. Z. Jiang,
T. Dai,
Z. C. Wen,
B. S. Han,
C. D. Wang,
G. Y. Zhang
Abstract:
We propose a method for nano-scale characterization of long range magnetic order in diluted magnetic systems to clarify the origins of the room temperature ferromagnetism. The GaN:Mn thin films are grown by metal-organic chemical vapor deposition with the concentration of Ga-substitutional Mn up to 3.8%. Atomic force microscope (AFM) and magnetic force microscope (MFM) characterizations are perfor…
▽ More
We propose a method for nano-scale characterization of long range magnetic order in diluted magnetic systems to clarify the origins of the room temperature ferromagnetism. The GaN:Mn thin films are grown by metal-organic chemical vapor deposition with the concentration of Ga-substitutional Mn up to 3.8%. Atomic force microscope (AFM) and magnetic force microscope (MFM) characterizations are performed on etched artificial microstructures and natural dislocation pits. Numerical simulations and theoretical analysis on the AFM and MFM data have confirmed the formation of long range magnetic order and ruled out the possibility that nano-clusters contributed to the ferromagnetism. We suggest that delocalized electrons might play a role in the establishment of this long range magnetic order.
△ Less
Submitted 17 November, 2010;
originally announced November 2010.
-
Large-scale Graphitic Thin Films Synthesized on Ni and Transferred to Insulators: Structural and Electronic Properties
Authors:
Helin Cao,
Qingkai Yu,
Robert Colby,
Deepak Pandey,
C. S. Park,
Jie Lian,
Dmitry Zemlyanov,
Isaac Childres,
Vladimir Drachev,
Eric A. Stach,
Muhammad Hussain,
Hao Li,
Steven S. Pei,
Yong P. Chen
Abstract:
We present a comprehensive study of the structural and electronic properties of ultrathin films containing graphene layers synthesized by chemical vapor deposition (CVD) based surface segregation on polycrystalline Ni foils then transferred onto insulating SiO2/Si substrates. Films of size up to several mm's have been synthesized. Structural characterizations by atomic force microscopy (AFM), sc…
▽ More
We present a comprehensive study of the structural and electronic properties of ultrathin films containing graphene layers synthesized by chemical vapor deposition (CVD) based surface segregation on polycrystalline Ni foils then transferred onto insulating SiO2/Si substrates. Films of size up to several mm's have been synthesized. Structural characterizations by atomic force microscopy (AFM), scanning tunneling microscopy (STM), cross-sectional transmission electron microscopy (XTEM) and Raman spectroscopy confirm that such large scale graphitic thin films (GTF) contain both thick graphite regions and thin regions of few layer graphene. The films also contain many wrinkles, with sharply-bent tips and dislocations revealed by XTEM, yielding insights on the growth and buckling processes of the GTF. Measurements on mm-scale back-gated transistor devices fabricated from the transferred GTF show ambipolar field effect with resistance modulation ~50% and carrier mobilities reaching ~2000 cm^2/Vs. We also demonstrate quantum transport of carriers with phase coherence length over 0.2 $μ$m from the observation of 2D weak localization in low temperature magneto-transport measurements. Our results show that despite the non-uniformity and surface roughness, such large-scale, flexible thin films can have electronic properties promising for device applications.
△ Less
Submitted 23 February, 2010; v1 submitted 9 January, 2009;
originally announced January 2009.
-
Graphene Segregated on Ni surfaces and Transferred to Insulators
Authors:
Qingkai Yu,
Jie Lian,
Sujitra Siriponglert,
Hao Li,
Yong Chen,
Shin-Shem Pei
Abstract:
We report an approach to synthesize high quality graphene by surface segregation and substrate transfer. Graphene was segregated from Ni surface under the ambient pressure by dissolving carbon in Ni at high temperatures followed by cooling down with various rates. Different cooling rates led to different segregation behaviors, strongly affecting the thickness and quality of the graphene films. E…
▽ More
We report an approach to synthesize high quality graphene by surface segregation and substrate transfer. Graphene was segregated from Ni surface under the ambient pressure by dissolving carbon in Ni at high temperatures followed by cooling down with various rates. Different cooling rates led to different segregation behaviors, strongly affecting the thickness and quality of the graphene films. Electron microscopy and Raman spectroscopy indicated that the graphene films synthesized with medium cooling rates have high quality crystalline structure and well-controlled thicknesses. The graphene films were transferred to insulating substrates by wet etching and found to maintain their high quality.
△ Less
Submitted 9 December, 2008; v1 submitted 10 April, 2008;
originally announced April 2008.
