-
Direct visualization of domain wall pinning in sub-100nm 3D magnetic nanowires with cross-sectional curvature
Authors:
Joseph Askey,
Matthew Oliver Hunt,
Lukas Payne,
Arjen van den Berg,
Ioannis Pitsios,
Alaa Hejazi,
Wolfgang Langbein,
Sam Ladak
Abstract:
The study of 3D magnetic nanostructures has uncovered a range of rich phenomena including the stabilization and control of topological spin textures using nanoscale curvature, dynamic effects allowing controlled spin-wave emission, and novel ground states enabled by collective 3D frustrated interactions. From a technological perspective, 3D nanostructures offer routes to ultrahigh density data sto…
▽ More
The study of 3D magnetic nanostructures has uncovered a range of rich phenomena including the stabilization and control of topological spin textures using nanoscale curvature, dynamic effects allowing controlled spin-wave emission, and novel ground states enabled by collective 3D frustrated interactions. From a technological perspective, 3D nanostructures offer routes to ultrahigh density data storage, massive interconnectivity within neuromorphic devices, as well as applications within health technologies, such as mechanical induction of stem cell differentiation. However, the fabrication of 3D nanomagnetic systems with feature sizes down to 10 nm poses a significant challenge. In this work we present a means of fabricating sub-100 nm 3D ferromagnetic nanowires, with both cross-sectional and longitudinal curvature, using two-photon lithography at a wavelength of 405 nm, combined with conventional deposition. Physical characterization illustrates that nanostructures with lateral features as low as 70 nm can be rapidly and reproducibly fabricated. A range of novel domain walls, with anti-vortex textures, coupled transverse textures, and hybrid vortex/anti-vortex textures are found to be enabled by the cross-sectional curvature of the system, as demonstrated by finite-element micromagnetic simulations. Magnetic force microscopy experiments in an externally applied magnetic field are used to image the injection and pinning of domain walls in the 3D magnetic nanowire. At specific field values, domain walls are observed to hop from trap to trap, providing a direct means to probe the local energy landscape. A simple model is presented demonstrating that thickness gradients and local roughness dictate the variation of pinning probability across the wire.
△ Less
Submitted 7 March, 2024;
originally announced March 2024.
-
Spin-wave spectral analysis in crescent-shaped ferromagnetic nanorods
Authors:
Mateusz Gołębiewski,
Hanna Reshetniak,
Uladzislau Makartsou,
Maciej Krawczyk,
Arjen van den Berg,
Sam Ladak,
Anjan Barman
Abstract:
The research on the properties of spin waves (SWs) in three-dimensional nanosystems is an innovative idea in the field of magnonics. Mastering and understanding the nature of magnetization dynamics and binding of SWs at surfaces, edges, and in-volume parts of three-dimensional magnetic systems enables the discovery of new phenomena and suggests new possibilities for their use in magnonic and spint…
▽ More
The research on the properties of spin waves (SWs) in three-dimensional nanosystems is an innovative idea in the field of magnonics. Mastering and understanding the nature of magnetization dynamics and binding of SWs at surfaces, edges, and in-volume parts of three-dimensional magnetic systems enables the discovery of new phenomena and suggests new possibilities for their use in magnonic and spintronic devices. In this work, we use numerical methods to study the effect of geometry and external magnetic field manipulations on the localization and dynamics of SWs in crescent-shaped (CS) waveguides. It is shown that changing the magnetic field direction in these waveguides breaks the symmetry and affects the localization of eigenmodes with respect to the static demagnetizing field. This in turn has a direct effect on their frequency. Furthermore, CS structures were found to be characterized by significant saturation at certain field orientations, resulting in a cylindrical magnetization distribution. Thus, we present chirality-based nonreciprocal dispersion relations for high-frequency SWs, which can be controlled by the field direction (shape symmetry) and its amplitude (saturation).
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Exploring the phases of 3D artificial spin ice: From Coulomb phase to magnetic monopole crystal
Authors:
M. Saccone,
A. Van den Berg,
E. Harding,
S. Singh,
S. R. Giblin,
F. Flicker,
S. Ladak
Abstract:
Artificial spin-ices consist of lithographic arrays of single-domain magnetic nanowires organised into frustrated lattices. These geometries are usually two-dimensional, allowing a direct exploration of physics associated with frustration, topology and emergence. Recently, three-dimensional geometries have been realised, in which transport of emergent monopoles can be directly visualised upon the…
▽ More
Artificial spin-ices consist of lithographic arrays of single-domain magnetic nanowires organised into frustrated lattices. These geometries are usually two-dimensional, allowing a direct exploration of physics associated with frustration, topology and emergence. Recently, three-dimensional geometries have been realised, in which transport of emergent monopoles can be directly visualised upon the surface. Here we carry out an exploration of the three-dimensional artificial spin-ice phase diagram, whereby dipoles are placed within a diamond-bond lattice geometry. We find a rich phase diagram, consisting of a double-charged monopole crystal, a single-charged monopole crystal and conventional spin-ice with pinch points associated with a Coulomb phase. In our experimental demagnetised systems, broken symmetry forces formation of ferromagnetic stripes upon the surface, a configuration that forbids the formation of the lower energy double-charged monopole crystal. Instead, we observe crystallites of single magnetic charge, superimposed upon an ice background. The crystallites are found to form due to the intricate distribution of magnetic charge around a three-dimensional nanostructured vertex, which locally favours monopole formation. Our work suggests that engineered surface energetics can be used to tune the ground state of experimental three-dimensional ASI systems.
△ Less
Submitted 8 November, 2022;
originally announced November 2022.
-
Roadmap on Spin-Wave Computing
Authors:
A. V. Chumak,
P. Kabos,
M. Wu,
C. Abert,
C. Adelmann,
A. Adeyeye,
J. Åkerman,
F. G. Aliev,
A. Anane,
A. Awad,
C. H. Back,
A. Barman,
G. E. W. Bauer,
M. Becherer,
E. N. Beginin,
V. A. S. V. Bittencourt,
Y. M. Blanter,
P. Bortolotti,
I. Boventer,
D. A. Bozhko,
S. A. Bunyaev,
J. J. Carmiggelt,
R. R. Cheenikundil,
F. Ciubotaru,
S. Cotofana
, et al. (91 additional authors not shown)
Abstract:
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the…
▽ More
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the academic domain, the scientific and technological challenges of the field are being extensively investigated, and many proof-of-concept prototypes have already been realized in laboratories. This roadmap is a product of the collective work of many authors that covers versatile spin-wave computing approaches, conceptual building blocks, and underlying physical phenomena. In particular, the roadmap discusses the computation operations with Boolean digital data, unconventional approaches like neuromorphic computing, and the progress towards magnon-based quantum computing. The article is organized as a collection of sub-sections grouped into seven large thematic sections. Each sub-section is prepared by one or a group of authors and concludes with a brief description of the current challenges and the outlook of the further development of the research directions.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Observation of Coherent Spin Waves in a Three-Dimensional Artificial Spin Ice Structure
Authors:
Sourav Sahoo,
Andrew May,
Arjen van Den Berg,
Amrit Kumar Mondal,
Sam Ladak,
Anjan Barman
Abstract:
Harnessing high-frequency spin dynamics in three-dimensional (3D) nanostructures may lead to paradigm-shifting, next generation devices including high density spintronics and neuromorphic systems. Despite remarkable progress in fabrication, the measurement and interpretation of spin dynamics in complex 3D structures remain exceptionally challenging. Here we take a first step and measure coherent s…
▽ More
Harnessing high-frequency spin dynamics in three-dimensional (3D) nanostructures may lead to paradigm-shifting, next generation devices including high density spintronics and neuromorphic systems. Despite remarkable progress in fabrication, the measurement and interpretation of spin dynamics in complex 3D structures remain exceptionally challenging. Here we take a first step and measure coherent spin waves within a 3D artificial spin ice (ASI) structure using Brillouin light scattering. The 3D-ASI was fabricated by using a combination of two-photon lithography and thermal evaporation. Two spin-wave modes were observed in the experiment whose frequencies showed a monotonic variation with the applied field strength. Numerical simulations qualitatively reproduced the observed modes. The simulated mode profiles revealed the collective nature of the modes extending throughout the complex network of nanowires while showing spatial quantization with varying mode quantization numbers. The study shows a well-defined means to explore high-frequency spin dynamics in complex 3D spintronic and magnonic structures.
△ Less
Submitted 20 February, 2021;
originally announced February 2021.
-
Magnetic Charge Propagation upon a 3D Artificial Spin-ice
Authors:
Andrew May,
Michael Saccone,
Arjen van den Berg,
Joseph Askey,
Matthew Hunt,
Sam Ladak
Abstract:
Magnetic charge propagation in bulk frustrated materials has yielded a paradigm-shift in science, allowing the symmetry between electricity and magnetism to be studied. Recent work is now suggesting magnetic charge dynamics upon the spin-ice surface may have important implications in determining the ordering and associated phase space. Here we detail a 3D artificial spin-ice, a 3D nanostructured a…
▽ More
Magnetic charge propagation in bulk frustrated materials has yielded a paradigm-shift in science, allowing the symmetry between electricity and magnetism to be studied. Recent work is now suggesting magnetic charge dynamics upon the spin-ice surface may have important implications in determining the ordering and associated phase space. Here we detail a 3D artificial spin-ice, a 3D nanostructured array of magnetic islands which captures the exact geometry of bulk systems, allowing field-driven dynamics of magnetic charge to be directly visualized upon the surface. Using magnetic microscopy, we observe vastly different magnetic charge dynamics along two principle directions. These striking differences are found to be due to the surface-termination and associated coordination which yields different energetics and interaction strengths for magnetic charges upon the surface.
△ Less
Submitted 6 January, 2021; v1 submitted 15 July, 2020;
originally announced July 2020.
-
Exploiting femtosecond laser exposure for additive and subtractive fabrication of functional materials: A Route to designer 3D Magnetic Nanostructures
Authors:
Arjen van den Berg,
Mylene Caruel,
Matthew Hunt,
Sam Ladak
Abstract:
Three-dimensional nanostructured functional materials are important systems, allowing new means to intricately control electromagnetic properties. A key problem is realising a 3D printing methodology upon the nanoscale that can yield a range of functional materials. In this letter, it is shown that two-photon lithography when combined with femtosecond machining of sacrificial layers, can be used t…
▽ More
Three-dimensional nanostructured functional materials are important systems, allowing new means to intricately control electromagnetic properties. A key problem is realising a 3D printing methodology upon the nanoscale that can yield a range of functional materials. In this letter, it is shown that two-photon lithography when combined with femtosecond machining of sacrificial layers, can be used to realise such a vision and produce 3D functional nanomaterials of complex geometry. This is demonstrated by fabricating 3D magnetic nanowires that exhibit controlled domain wall injection and propagation. Secondly, we fabricate large scale 3D artificial spin-ice structures whose complex switching can be probed using optical magnetometry. We show that by careful analysis of the magneto-optical Kerr effect signal and by comparison with micro-magnetic simulations, depth dependent switching information can be obtained from the 3DASI lattice. The work paves the way to new materials, which exploit additional physics provided by non-trivial 3D geometries.
△ Less
Submitted 28 October, 2021; v1 submitted 29 May, 2020;
originally announced May 2020.
-
Realisation of a Frustrated 3D Magnetic Nanowire Lattice
Authors:
Andrew May,
Matthew Hunt,
Arjen Van Den Berg,
Alaa Hejazi,
Sam Ladak
Abstract:
Patterning nanomagnets in three-dimensions presents a new paradigm in condensed matter physics and allows access to a plethora of fundamental phenomena including robust spin textures, magnetic metamaterials that are home to defects carrying magnetic charge and ultrahigh density devices that store information in three-dimensions. However, the nanostructuring of functional magnetic materials into co…
▽ More
Patterning nanomagnets in three-dimensions presents a new paradigm in condensed matter physics and allows access to a plethora of fundamental phenomena including robust spin textures, magnetic metamaterials that are home to defects carrying magnetic charge and ultrahigh density devices that store information in three-dimensions. However, the nanostructuring of functional magnetic materials into complex three-dimensional geometries has thus far proven to be a formidable challenge. Here we show magnetic nanowires can be arranged into 3D frustrated magnetic nanowire lattices by using a combination of 3D polymer nanoprinting and metallic deposition. The fabricated nanowires are single domain and they switch via nucleation and propagation of domain walls. Deep nanoscale magnetic imaging and finite element simulations elucidate the spin texture present on the 3D nanostructured lattice. Our study demonstrates a generic platform for the production of 3D nanostructured magnetic materials allowing the realisation of racetrack memory devices and 3D nanostructured systems that mimic bulk frustrated crystals.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Two-photon Lithography for 3D Magnetic Nanostructure Fabrication
Authors:
Gwilym Williams,
Matthew Hunt,
Benedikt Boehm,
Andrew May,
Michael Taverne,
Daniel Ho,
Sean Giblin,
Dan Read,
John Rarity,
Rolf Allenspach,
Sam Ladak
Abstract:
Ferromagnetic materials have been utilised as recording media within data storage devices for many decades. Confinement of the material to a two dimensional plane is a significant bottleneck in achieving ultra-high recording densities and this has led to the proposition of three dimensional (3D) racetrack memories that utilise domain wall propagation along nanowires. However, the fabrication of 3D…
▽ More
Ferromagnetic materials have been utilised as recording media within data storage devices for many decades. Confinement of the material to a two dimensional plane is a significant bottleneck in achieving ultra-high recording densities and this has led to the proposition of three dimensional (3D) racetrack memories that utilise domain wall propagation along nanowires. However, the fabrication of 3D magnetic nanostructures of complex geometry is highly challenging and not easily achievable with standard lithography techniques. Here, by using a combination of two-photon lithography and electrochemical deposition, we show a new approach to construct 3D magnetic nanostructures of complex geometry. The magnetic properties are found to be intimately related to the 3D geometry of the structure and magnetic imaging experiments provide evidence of domain wall pinning at a 3D nanostructured junction.
△ Less
Submitted 11 July, 2017;
originally announced July 2017.
