-
Suppression of the spin waves nonreciprocity due to interfacial Dzyaloshinskii Moriya interaction by lateral confinement in magnetic nanostructures
Authors:
S. Tacchi,
R. Silvani,
M. Kuepferling,
A. Fernandez Scarioni,
S. Sievers,
H. W. Schumacher,
E. Darwin,
M. -A. Syskaki,
G. Jakob,
M. Klaui,
G. Carlotti
Abstract:
Despite the huge recent interest towards chiral magnetism related to the interfacial Dzyaloshinskii Moriya interaction (iDMI) in layered systems, there is a lack of experimental data on the effect of iDMI on the spin waves eigenmodes of laterally confined nanostructures. Here we exploit Brillouin Light Scattering (BLS) to analyze the spin wave eigenmodes of non-interacting circular and elliptical…
▽ More
Despite the huge recent interest towards chiral magnetism related to the interfacial Dzyaloshinskii Moriya interaction (iDMI) in layered systems, there is a lack of experimental data on the effect of iDMI on the spin waves eigenmodes of laterally confined nanostructures. Here we exploit Brillouin Light Scattering (BLS) to analyze the spin wave eigenmodes of non-interacting circular and elliptical dots, as well as of long stripes, patterned starting from a Pt(3.4 nm)/CoFeB(0.8 nm) bilayer, with lateral dimensions ranging from 100 nm to 400 nm. Our experimental results, corroborated by micromagnetic simulations based on the GPU-accelerated MuMax3 software package, provide evidence for a strong suppression of the frequency asymmetry between counter-propagating spin waves (corresponding to either Stokes or anti-Stokes peaks in BLS spectra), when the lateral confinement is reduced from 400 nm to 100 nm, i.e. when it becomes lower than the light wavelength. Such an evolution reflects the modification of the spin wave character from propagating to stationary and indicates that the BLS based method of quantifying the i-DMI strength from the frequency difference of counter propagating spin waves is not applicable in the case of magnetic elements with lateral dimension below about 400 nm.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Key points in the determination of the interfacial Dzyaloshinskii-Moriya interaction from asymmetric bubble domain expansion
Authors:
A. Magni,
G. Carlotti,
A. Casiraghi,
E. Darwin,
G. Durin,
L. Herrera Diez,
B. J. Hickey,
A. Huxtable,
C. Y. Hwang,
G. Jakob,
C. Kim,
M. Kläui,
J. Langer,
C. H. Marrows,
H. T. Nembach,
D. Ravelosona,
G. A. Riley,
J. M. Shaw,
V. Sokalski,
S. Tacchi,
M. Kuepferling
Abstract:
Different models have been used to evaluate the interfacial Dzyaloshinskii-Moriya interaction (DMI) from the asymmetric bubble expansion method using magneto-optics. Here we investigate the most promising candidates over a range of different magnetic multilayers with perpendicular anisotropy. Models based on the standard creep hypothesis are not able to reproduce the domain wall (DW) velocity prof…
▽ More
Different models have been used to evaluate the interfacial Dzyaloshinskii-Moriya interaction (DMI) from the asymmetric bubble expansion method using magneto-optics. Here we investigate the most promising candidates over a range of different magnetic multilayers with perpendicular anisotropy. Models based on the standard creep hypothesis are not able to reproduce the domain wall (DW) velocity profile when the DW roughness is high. Our results demonstrate that the DW roughness and the interface roughness of the sample layers are correlated. Furthermore, we give guidance on how to obtain reliable results for the DMI value with this popular method. A comparison of the results with Brillouin light scattering (BLS) measurements on the same samples shows that the BLS approach often results in higher measured values of DMI.
△ Less
Submitted 13 January, 2022;
originally announced January 2022.
-
Impact of the interfacial Dzyaloshinskii-Moriya interaction on the band structure of one-dimensional artificial magnonic crystals: a micromagnetic study
Authors:
R. Silvania,
M. Kuepferling,
S. Tacchi,
G. Carlotti
Abstract:
We present the results of a systematic micromagnetic study of the effect of the Dzyaloshinskii-Moriya interaction (DMI) on the spin wave band structure of two one-dimensional magnonic crystals (MCs), both with the same periodicity p=300 nm, but different implementation of the DMI modulation. In the first system the artificial periodicity was achieved by modulating the interfacial DMI constant D, w…
▽ More
We present the results of a systematic micromagnetic study of the effect of the Dzyaloshinskii-Moriya interaction (DMI) on the spin wave band structure of two one-dimensional magnonic crystals (MCs), both with the same periodicity p=300 nm, but different implementation of the DMI modulation. In the first system the artificial periodicity was achieved by modulating the interfacial DMI constant D, while in the second system also the sample morphology was modulated. Due to the folding property of the band structure in the dispersion relations of the magnonic crystals it is possible to extend the sensitivity of Brillouin light scattering towards weak DMI strength (D in the range from 0 to 0.5 mJ/m2), by measuring the frequency splitting of folded modes in high-order artificial Brillouin zones, since the splitting increases almost linearly with the band index. For relatively large values of the DMI (D in the range from 1.0 to 2.0 mJ/m2) the spin waves dispersion relations present flat modes for positive wavevectors, separated by forbidden frequency gaps whose amplitude depend on the value of D. These frequency gaps are more pronounced for the sample with morphology modulation. The non-reciprocal, localised, spatial profiles of these modes in both MCs are discussed with reference to spin waves in plain films and in isolated stripes of the same thickness.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Temperature dependence of the mean magnon collision time in a spin Seebeck device
Authors:
Vittorio Basso,
Alessandro Sola,
Patrizio Ansalone,
Michaela Kuepferling
Abstract:
Based on the relaxation time approximation, the mean collision time for magnon scattering $τ_c(T)$ is computed from the experimental spin Seebeck coefficient of a bulk YIG / Pt bilayer. The scattering results to be composed by two processes: the low temperature one, with a $T^{-1/2}$ dependence, is attributed to the scattering by defects and provides a mean free path around 10 $μ$m; the high tempe…
▽ More
Based on the relaxation time approximation, the mean collision time for magnon scattering $τ_c(T)$ is computed from the experimental spin Seebeck coefficient of a bulk YIG / Pt bilayer. The scattering results to be composed by two processes: the low temperature one, with a $T^{-1/2}$ dependence, is attributed to the scattering by defects and provides a mean free path around 10 $μ$m; the high temperature one, depending on $T^{-4}$, is associated to the scattering by other magnons. The results are employed to predict the thickness dependence of the spin Seebeck coefficient for thin films.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
Measuring interfacial Dzyaloshinskii-Moriya interaction in ultra-thin magnetic films
Authors:
Michaela Kuepferling,
Arianna Casiraghi,
Gabriel Soares,
Gianfranco Durin,
Felipe Garcia-Sanchez,
Liu Chen,
Christian H. Back,
Christopher H. Marrows,
Silvia Tacchi,
Giovanni Carlotti
Abstract:
The Dzyaloshinskii-Moriya interaction (DMI), being one of the origins of chiral magnetism, is currently attracting considerable attention in the research community focusing on applied magnetism and spintronics. For future applications, an accurate measurement of its strength is indispensable. Here we present a review of the state-of-the-art of measuring the coefficient of the Dzyaloshinskii-Moriya…
▽ More
The Dzyaloshinskii-Moriya interaction (DMI), being one of the origins of chiral magnetism, is currently attracting considerable attention in the research community focusing on applied magnetism and spintronics. For future applications, an accurate measurement of its strength is indispensable. Here we present a review of the state-of-the-art of measuring the coefficient of the Dzyaloshinskii-Moriya interaction, the DMI constant $D$, focusing on systems where the interaction arises from the interface between two materials (i.e. interfacial DMI). We give an overview of the experimental techniques as well as their theoretical background and models for the quantification of the DMI constant. The measurement techniques are divided into three categories: a) domain wall-based measurements, b) spin wave-based measurements and c) spin-orbit torque-based measurements. We analyze the advantages and disadvantages of each method and compare $D$ values at different interfaces. The review aims to obtain a better understanding of the applicability of the different techniques to various stacks and of the origin of apparent disagreements among literature values.
△ Less
Submitted 22 March, 2022; v1 submitted 24 September, 2020;
originally announced September 2020.
-
Spincaloritronic measurements: a round robin comparison of the longitudinal spin Seebeck effect
Authors:
A. Sola,
V. Basso,
M. Kuepferling,
M. Pasquale,
D. Meier,
G. Reiss,
T. Kuschel,
T. Kikkawa,
K. Uchida,
E. Saitoh,
H. **,
S. Boona,
S. Watzman,
J. Heremans,
M. B. Jungfleisch,
W. Zhang,
J. E. Pearson,
A. Hoffmann,
H. W. Schumacher
Abstract:
The rising field of spin caloritronics focuses on the interactions between spin and heat currents in a magnetic material; the observation of the spin Seebeck effect opened the route to this branch of research. This paper reports the results of a round robin test performed by five partners on a single device highlighting the reproducibility problems related to the measurements of the spin Seebeck c…
▽ More
The rising field of spin caloritronics focuses on the interactions between spin and heat currents in a magnetic material; the observation of the spin Seebeck effect opened the route to this branch of research. This paper reports the results of a round robin test performed by five partners on a single device highlighting the reproducibility problems related to the measurements of the spin Seebeck coefficient, the quantity that describes the strength of the spin Seebeck effect. This work stimulated the search for more reproducible measurement methods through the analysis of the systematic effects.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Experimental proof of the reciprocal relation between spin Peltier and spin Seebeck effects in a bulk YIG/Pt bilayer
Authors:
Alessandro Sola,
Vittorio Basso,
Michaela Kuepferling,
Carsten Dubs,
Massimo Pasquale
Abstract:
We verify for the first time the reciprocal relation between the spin Peltier and spin Seebeck effects in a bulk YIG/Pt bilayer. Both experiments are performed on the same YIG/Pt device by a setup able to accurately determine heat currents and to separate the spin Peltier heat from the Joule heat background. The sample-specific value for the characteristics of both effects measured on the present…
▽ More
We verify for the first time the reciprocal relation between the spin Peltier and spin Seebeck effects in a bulk YIG/Pt bilayer. Both experiments are performed on the same YIG/Pt device by a setup able to accurately determine heat currents and to separate the spin Peltier heat from the Joule heat background. The sample-specific value for the characteristics of both effects measured on the present YIG/Pt bilayer is $(6.2 \pm 0.4)\times 10^{-3} \,\, \mbox{KA$^{-1}$}$. In the paper we also discuss the relation of both effects with the intrinsic and extrinsic parameters of YIG and Pt and we envisage possible strategies to optimize spin Peltier refrigeration.
△ Less
Submitted 13 November, 2018;
originally announced November 2018.
-
Longitudinal spin Seebeck coefficient: heat flux vs. temperature difference method
Authors:
A. Sola,
P. Bougiatioti,
M. Kuepferling,
D. Meier,
G. Reiss,
M. Pasquale,
T. Kuschel,
V. Basso
Abstract:
The determination of the longitudinal spin Seebeck effect (LSSE) coefficient is currently plagued by a large uncertainty due to the poor reproducibility of the experimental conditions used in its measurement. In this work we present a detailed analysis of two different methods used for the determination of the LSSE coefficient. We have performed LSSE experiments in different laboratories, by using…
▽ More
The determination of the longitudinal spin Seebeck effect (LSSE) coefficient is currently plagued by a large uncertainty due to the poor reproducibility of the experimental conditions used in its measurement. In this work we present a detailed analysis of two different methods used for the determination of the LSSE coefficient. We have performed LSSE experiments in different laboratories, by using different setups and employing both the temperature difference method and the heat flux method. We found that the lack of reproducibility can be mainly attributed to the thermal contact resistance between the sample and the thermal baths which generate the temperature gradient. Due to the variation of the thermal resistance, we found that the scaling of the LSSE voltage to the heat flux through the sample rather than to the temperature difference across the sample greatly reduces the uncertainty. The characteristics of a single YIG/Pt LSSE device obtained with two different setups was $(1.143\pm0.007)\cdot 10^{-7}$ Vm/W and $(1.101\pm0.015)\cdot 10^{-7}$ Vm/W with the heat flux method and $(2.313\pm0.017)\cdot 10^{-7}$ V/K and $(4.956\pm0.005)\cdot 10^{-7}$ V/K with the temperature difference method. This shows that systematic errors can be considerably reduced with the heat flux method.
△ Less
Submitted 10 November, 2018; v1 submitted 12 January, 2017;
originally announced January 2017.
-
Non-equilibrium thermodynamics of the spin Seebeck and spin Peltier effects
Authors:
Vittorio Basso,
Elena Ferraro,
Alessandro Magni,
Alessandro Sola,
Michaela Kuepferling,
Massimo Pasquale
Abstract:
We study the problem of magnetization and heat currents and their associated thermodynamic forces in a magnetic system by focusing on the magnetization transport in ferromagnetic insulators like YIG. The resulting theory is applied to the longitudinal spin Seebeck and the spin Peltier effects. By focusing on the specific geometry with one YIG layer and one Pt layer, we obtain the optimal condition…
▽ More
We study the problem of magnetization and heat currents and their associated thermodynamic forces in a magnetic system by focusing on the magnetization transport in ferromagnetic insulators like YIG. The resulting theory is applied to the longitudinal spin Seebeck and the spin Peltier effects. By focusing on the specific geometry with one YIG layer and one Pt layer, we obtain the optimal conditions for generating large magnetization currents into Pt or large temperature effects in YIG. The theoretical predictions are compared with experiments from the literature permitting to derive the values of the thermomagnetic coefficients of YIG: the magnetization diffusion length $l_M \sim 0.4 \, μ$m and the absolute thermomagnetic power coefficient $ε_M \sim 10^{-2}$ TK$^{-1}$.
△ Less
Submitted 5 May, 2016; v1 submitted 30 December, 2015;
originally announced December 2015.
-
Thermodynamics of the heat currents in the longitudinal spin Seebeck and spin Peltier effects
Authors:
Vittorio Basso,
Elena Ferraro,
Alessandro Magni,
Alessandro Sola,
Michaela Kuepferling,
Massimo Pasquale
Abstract:
We employ the non-equilibrium thermodynamics of currents and forces to describe the heat transport caused by a spin current in a Pt/YIG bilayer. By starting from the constitutive equations of the magnetization currents in both Pt and YIG, we derive the magnetization potentials and currents. We apply the theory to the spin Peltier experiments in which a spin current, generated by the spin Hall effe…
▽ More
We employ the non-equilibrium thermodynamics of currents and forces to describe the heat transport caused by a spin current in a Pt/YIG bilayer. By starting from the constitutive equations of the magnetization currents in both Pt and YIG, we derive the magnetization potentials and currents. We apply the theory to the spin Peltier experiments in which a spin current, generated by the spin Hall effect in Pt, is injected into YIG. We find that efficient injection is obtained when: i) the thickness of each layer is larger than its diffusion length: $t_{Pt} > l_{Pt}$ and $t_{YIG} > l_{YIG}$ and ii) the ratio $(l_{Pt}/τ_{Pt})/(l_{YIG}/τ_{YIG})$ is small, where $τ_i$ is the time constant of the intrinsic dam** ($i=Pt, YIG$). We finally derive the temperature profile in adiabatic conditions. The scale of the effect is given by the parameter $ΔT_{SH}$ which is proportional to the electric current in Pt. Using known parameters for Pt and YIG we estimate $ΔT_{SH}/j_e = 4 \cdot 10^{-13}$ K A$^{-1}$m$^2$. This value is of the same order of magnitude of the spin Peltier experiments.
△ Less
Submitted 20 December, 2016; v1 submitted 2 December, 2015;
originally announced December 2015.
-
Non-equilibrium thermodynamics of the longitudinal spin Seebeck effect
Authors:
Vittorio Basso,
Elena Ferraro,
Alessandro Magni,
Alessandro Sola,
Michaela Kuepferling,
Massimo Pasquale
Abstract:
In this paper we employ non equilibrium thermodynamics of fluxes and forces to describe magnetization and heat transport. By the theory we are able to identify the thermodynamic driving force of the magnetization current as the gradient of the effective field $\nabla H^*$. This definition permits to define the spin Seebeck coefficient $ε_M$ which relates $\nabla H^*$ and the temperature gradient…
▽ More
In this paper we employ non equilibrium thermodynamics of fluxes and forces to describe magnetization and heat transport. By the theory we are able to identify the thermodynamic driving force of the magnetization current as the gradient of the effective field $\nabla H^*$. This definition permits to define the spin Seebeck coefficient $ε_M$ which relates $\nabla H^*$ and the temperature gradient $\nabla T$. By applying the theory to the geometry of the longitudinal spin Seebeck effect we are able to obtain the optimal conditions for generating large magnetization currents. Furthermore, by using the results of recent experiments, we obtain an order of magnitude for the value of $ε_{M} \sim 10^{-2}$ TK$^{-1}$ for yttrium iron garnet (Y$_3$Fe$_5$O$_{12}$).
△ Less
Submitted 2 December, 2015;
originally announced December 2015.
-
Direct calorimetric measurements of isothermal entropy change on single crystal W-type hexaferrites at the spin reorientation transition
Authors:
Martino Lobue,
Vincent Loyau,
Frédéric Mazaleyrat,
Alexander Pasko,
Vittorio Basso,
Michaela Küpferling,
Carlo Paolo Sasso
Abstract:
We report on the magnetic field induced isothermal entropy change, Δs(Ha, T), of W-type ferrite with CoZn substitution. Entropy measurements are performed by direct calorimetry. Single crystals of the composition BaCo$_0.62$Zn$_1.38$Fe$_16$O$_27$, prepared by the flux method, are measured at different fixed temperatures under an applied field perpendicular and parallel to the c axis. At 296 K one…
▽ More
We report on the magnetic field induced isothermal entropy change, Δs(Ha, T), of W-type ferrite with CoZn substitution. Entropy measurements are performed by direct calorimetry. Single crystals of the composition BaCo$_0.62$Zn$_1.38$Fe$_16$O$_27$, prepared by the flux method, are measured at different fixed temperatures under an applied field perpendicular and parallel to the c axis. At 296 K one deduces a value of K$_1$ = 8.7 \times 10^{4} J m$^-3$ for the first anisotropy constant, which is in good agreement with the literature. The spin reorientation transition temperature is estimated to take place between 200 and 220 K.
△ Less
Submitted 3 October, 2012;
originally announced October 2012.
-
Magnetic and structural characterization of nanosized BaCo_xZn_{2-x}Fe_{16}O_{27} hexaferrite in the vicinity of spin reorientation transition
Authors:
Alexander Pasko,
Frédéric Mazaleyrat,
Martino Lo Bue,
Vincent Loyau,
Vittorio Basso,
Michaela Küpferling,
Carlo Sasso,
Lotfi Bessais
Abstract:
Numerous applications of hexagonal ferrites are related to their easy axis or easy plane magnetocrystalline anisotropy configurations. Certain W-type ferrites undergo spin reorientation transitions (SRT) between different anisotropy states on magnetic field or temperature variation. The transition point can be tuned by modifying the chemical composition, which suggests a potential application of h…
▽ More
Numerous applications of hexagonal ferrites are related to their easy axis or easy plane magnetocrystalline anisotropy configurations. Certain W-type ferrites undergo spin reorientation transitions (SRT) between different anisotropy states on magnetic field or temperature variation. The transition point can be tuned by modifying the chemical composition, which suggests a potential application of hexaferrites in room temperature magnetic refrigeration. Here we present the results of structural and magnetic characterization of BaCo_xZn_{2-x}Fe_{16}O_{27} (0.7 \leq x \leq 2) doped barium ferrites. Fine powders were prepared using a sol-gel citrate precursor method. Crystal structures and particle size distributions were examined by X-ray diffraction and transmission electron microscopy. The optimal synthesis temperature ensuring complete formation of single W-phase with limited grain growth has been determined. Spin reorientation transitions were revealed by thermomagnetic analysis and AC susceptibility measurements.
△ Less
Submitted 23 November, 2011;
originally announced November 2011.
