Showing 1–28 of 28 results for author: Krogel, J T

Towards improved property prediction of two-dimensional (2D) materials using many-body Quantum Monte Carlo methods

Authors: Daniel Wines, Jeonghwan Ahn, Anouar Benali, Paul R. C. Kent, Jaron T. Krogel, Yongkyung Kwon, Lubos Mitas, Fernando A. Reboredo, Brenda Rubenstein, Kayahan Saritas, Hyeondeok Shin, Ivan Štich, Can Ataca

Abstract: The field of two-dimensional (2D) materials has grown dramatically in the last two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computation applications. These 2D structures, which are often exfoliated from layered van der Waals (vdW) materials, possess highly inhomogeneous electron densities and can possess short- and… ▽ More The field of two-dimensional (2D) materials has grown dramatically in the last two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computation applications. These 2D structures, which are often exfoliated from layered van der Waals (vdW) materials, possess highly inhomogeneous electron densities and can possess short- and long-range electron correlations. The complexities of 2D materials make them challenging to study with standard mean-field electronic structure methods such as density functional theory (DFT), which relies on approximations for the unknown exchange-correlation functional. In order to overcome the limitations of DFT, highly accurate many-body electronic structure approaches such as Diffusion Monte Carlo (DMC) can be utilized. In the past decade, DMC has been used to calculate accurate magnetic, electronic, excitonic, and topological properties in addition to accurately capturing interlayer interactions and cohesion and adsorption energetics of 2D materials. This approach has been applied to 2D systems of wide interest including graphene, phosphorene, MoS$_2$, CrI$_3$, VSe$_2$, GaSe, GeSe, borophene, and several others. In this review article, we highlight some successful recent applications of DMC to 2D systems for improved property predictions beyond standard DFT. △ Less

Submitted 4 June, 2024; originally announced June 2024.

Exploring interlayer coupling in the twisted bilayer PtTe$_{2}$

Authors: Jeonghwan Ahn, Seoung-Hun Kang, Mina Yoon, Jaron T. Krogel

Abstract: We have investigated interlayer interactions in the bilayer PtTe$_{2}$ system, which influence the electronic energy bands near the Fermi levels. Our diffusion Monte Carlo (DMC) calculations for the high-symmetry bilayer stackings (AA, AB, AC) manifest distinct interlayer binding characteristics among the stacking modes by revealing significantly different interlayer separations depending on the s… ▽ More We have investigated interlayer interactions in the bilayer PtTe$_{2}$ system, which influence the electronic energy bands near the Fermi levels. Our diffusion Monte Carlo (DMC) calculations for the high-symmetry bilayer stackings (AA, AB, AC) manifest distinct interlayer binding characteristics among the stacking modes by revealing significantly different interlayer separations depending on the stackings, which is critical to understanding the interlayer coupling of the twisted bilayers consisting of various local stacking arrangements. Furthermore, a comparison between the interlayer separations obtained from DMC and density functional theory (DFT) shows that meta-GGA-based vdW-DFT results agree with DMC for different layer stackings, including twisted bilayers, but only the ground-state AA stacking matches well with GGA-based DFT predictions. This underscores the importance of accurate exchange-correlation potentials even for capturing the stacking-dependent interlayer binding properties. We further show that the variability in DFT-predicted interlayer separations is responsible for the large discrepancy of band structures in the 21.79$^{\circ}$-twisted bilayer PtTe$_{2}$, affecting its classification as metallic or semiconducting. These results demonstrate the importance of obtaining a correct description of stacking-dependent interlayer coupling in modeling delicate bilayer systems at finite twists. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Surrogate optimization of variational quantum circuits

Authors: Erik J. Gustafson, Juha Tiihonen, Diana Chamaki, Farshud Sorourifar, J. Wayne Mullinax, Andy C. Y. Li, Filip B. Maciejewski, Nicolas PD Sawaya, Jaron T. Krogel, David E. Bernal Neira, Norm M. Tubman

Abstract: Variational quantum eigensolvers are touted as a near-term algorithm capable of impacting many applications. However, the potential has not yet been realized, with few claims of quantum advantage and high resource estimates, especially due to the need for optimization in the presence of noise. Finding algorithms and methods to improve convergence is important to accelerate the capabilities of near… ▽ More Variational quantum eigensolvers are touted as a near-term algorithm capable of impacting many applications. However, the potential has not yet been realized, with few claims of quantum advantage and high resource estimates, especially due to the need for optimization in the presence of noise. Finding algorithms and methods to improve convergence is important to accelerate the capabilities of near-term hardware for VQE or more broad applications of hybrid methods in which optimization is required. To this goal, we look to use modern approaches developed in circuit simulations and stochastic classical optimization, which can be combined to form a surrogate optimization approach to quantum circuits. Using an approximate (classical CPU/GPU) state vector simulator as a surrogate model, we efficiently calculate an approximate Hessian, passed as an input for a quantum processing unit or exact circuit simulator. This method will lend itself well to parallelization across quantum processing units. We demonstrate the capabilities of such an approach with and without sampling noise and a proof-of-principle demonstration on a quantum processing unit utilizing 40 qubits. △ Less

Submitted 3 April, 2024; originally announced April 2024.

Comments: 7 pages, + appendix

Systematic Improvement of Quantum Monte Carlo Calculations in Transition Metal Oxides: sCI-Driven Wavefunction Optimization for Reliable Band Gap prediction

Authors: Hyeondeok Shin, Kevin Gasperich, Tomas Rojas, Anh T. Ngo, Jaron T. Krogel, Anouar Benali

Abstract: Accurate determination of electronic properties of correlated oxides remains a significant challenge for computational theory. Traditional Hubbard-corrected density functional theory (DFT+U) frequently encounters limitations in precisely capturing electron correlation, particularly when predicting band gaps. We introduce a systematic methodology to enhance the accuracy of diffusion Monte Carlo (DM… ▽ More Accurate determination of electronic properties of correlated oxides remains a significant challenge for computational theory. Traditional Hubbard-corrected density functional theory (DFT+U) frequently encounters limitations in precisely capturing electron correlation, particularly when predicting band gaps. We introduce a systematic methodology to enhance the accuracy of diffusion Monte Carlo (DMC) simulations for both ground and excited states, focusing on LiCoO$_2$ as a case study. By employing a selected CI (sCI) approach, we demonstrate the capability to optimize wavefunctions beyond the constraints of single-reference DFT+U trial wavefunctions. We show that the sCI framework enables accurate prediction of band gaps in LiCoO$_2$, closely aligning with experimental values and substantially improving upon traditional computational methods. The study uncovers a nuanced mixed state of $t_{2g}$ a $e_g$ orbitals at the band edges that is not captured by conventional single-reference methods, further elucidating the limitations of PBE+U in describing $d$-$d$ excitations. Our findings advocate for the adoption of beyond-DFT methodologies, such as sCI, to capture the essential physics of excited state wavefunctions in strongly correlated materials. The improved accuracy in band gap predictions and the ability to generate more reliable trial wavefunctions for DMC calculations underscore the potential of this approach for broader applications in the study of correlated oxides. This work not only provides a pathway for more accurate simulations of electronic structures in complex materials but also suggests a framework for future investigations into the excited states of other challenging systems. △ Less

Submitted 15 March, 2024; v1 submitted 6 March, 2024; originally announced March 2024.

Enhanced Twist-Averaging Technique for Magnetic Metals: Applications using Quantum Monte Carlo

Authors: Abdulgani Annaberdiyev, Panchapakesan Ganesh, Jaron T. Krogel

Abstract: We propose an improved twist-averaging scheme for quantum Monte Carlo methods that use converged Kohn-Sham or Hartree-Fock orbitals as the reference. This twist-averaging technique is tailored to sample the Brillouin zone of magnetic metals, although it naturally extends to nonmagnetic conducting systems. The proposed scheme aims to reproduce the reference magnetization and achieves charge neutral… ▽ More We propose an improved twist-averaging scheme for quantum Monte Carlo methods that use converged Kohn-Sham or Hartree-Fock orbitals as the reference. This twist-averaging technique is tailored to sample the Brillouin zone of magnetic metals, although it naturally extends to nonmagnetic conducting systems. The proposed scheme aims to reproduce the reference magnetization and achieves charge neutrality by construction, thus avoiding the large energy fluctuations and the postprocessing needed to correct the energies. It shows the most robust convergence of total energy and magnetism to the thermodynamic limit when compared to four other twist-averaging schemes. Diffusion Monte Carlo applications are shown on nonmagnetic Al and ferromagnetic $α$-Fe. The cohesive energy of Al in the thermodynamic limit shows an excellent agreement with the experimental result. Furthermore, the magnetic moments in $α$-Fe exhibit rapid convergence with an increasing number of twists. △ Less

Submitted 19 March, 2024; v1 submitted 12 January, 2024; originally announced January 2024.

Locality Error Free Effective Core Potentials for 3d Transition Metal Elements Developed for the Diffusion Monte Carlo Method

Authors: Tom Ichibha, Yutaka Nikaido, M. Chandler Bennett, Jaron T. Krogel, Kenta Hongo, Ryo Maezono, Fernando A. Reboredo

Abstract: Pseudopotential locality errors have hampered the applications of the diffusion Monte Carlo (DMC) method in materials containing transition metals, in particular oxides. We have developed locality error free effective core potentials, pseudo-Hamiltonians, for transition metals ranging from Cr to Zn. We have modified a procedure published by some of us in [M.C. Bennett et al, JCTC 18 (2022)]. We ca… ▽ More Pseudopotential locality errors have hampered the applications of the diffusion Monte Carlo (DMC) method in materials containing transition metals, in particular oxides. We have developed locality error free effective core potentials, pseudo-Hamiltonians, for transition metals ranging from Cr to Zn. We have modified a procedure published by some of us in [M.C. Bennett et al, JCTC 18 (2022)]. We carefully optimized our pseudo-Hamiltonians and achieved transferability errors comparable to the best semilocal pseudopotentials used with DMC but without incurring in locality errors. Our pseudo-Hamiltonian set (named OPH23) bears the potential to significantly improve the accuracy of many-body-first-principles calculations in fundamental science research of complex materials involving transition metals. △ Less

Submitted 12 October, 2023; originally announced October 2023.

Emergent magnetism with continuous control in the ultrahigh conductivity layered oxide PdCoO2

Authors: Matthew Brahlek, Alessandro R. Mazza, Abdulgani Annaberdiyev, Michael Chilcote, Gaurab Rimal, Gábor B. Halász, Anh Pham, Yun-Yi Pai, Jaron T. Krogel, Jason Lapano, Benjamin J. Lawrie, Gyula Eres, Jessica McChesney, Thomas Prokscha, Andreas Suter, Seongshik Oh, John W. Freeland, Yue Cao, Jason S. Gardner, Zaher Salman, Robert G. Moore, Panchapakesan Ganesh, T. Zac Ward

Abstract: The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state v… ▽ More The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties such as valence, spin, and orbital degrees of freedom as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultra-high conductivity, non-magnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce emergence of a net moment on the surrounding transition metal octahedral sites. These highly-localized moments communicate through the itinerant metal states which triggers the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultra-high conductivity film and will be critical to applications across spintronics. △ Less

Submitted 27 August, 2023; v1 submitted 25 July, 2023; originally announced July 2023.

Comments: https://pubs.acs.org/doi/abs/10.1021/acs.nanolett.3c01065

Journal ref: Nano Letters 23, 16, 7279-7287 (2023)

JARVIS-Leaderboard: A Large Scale Benchmark of Materials Design Methods

Authors: Kamal Choudhary, Daniel Wines, Kangming Li, Kevin F. Garrity, Vishu Gupta, Aldo H. Romero, Jaron T. Krogel, Kayahan Saritas, Addis Fuhr, Panchapakesan Ganesh, Paul R. C. Kent, Keqiang Yan, Yuchao Lin, Shuiwang Ji, Ben Blaiszik, Patrick Reiser, Pascal Friederich, Ankit Agrawal, Pratyush Tiwary, Eric Beyerle, Peter Minch, Trevor David Rhone, Ichiro Takeuchi, Robert B. Wexler, Arun Mannodi-Kanakkithodi , et al. (13 additional authors not shown)

Abstract: Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform… ▽ More Lack of rigorous reproducibility and validation are major hurdles for scientific development across many fields. Materials science in particular encompasses a variety of experimental and theoretical approaches that require careful benchmarking. Leaderboard efforts have been developed previously to mitigate these issues. However, a comprehensive comparison and benchmarking on an integrated platform with multiple data modalities with both perfect and defect materials data is still lacking. This work introduces JARVIS-Leaderboard, an open-source and community-driven platform that facilitates benchmarking and enhances reproducibility. The platform allows users to set up benchmarks with custom tasks and enables contributions in the form of dataset, code, and meta-data submissions. We cover the following materials design categories: Artificial Intelligence (AI), Electronic Structure (ES), Force-fields (FF), Quantum Computation (QC) and Experiments (EXP). For AI, we cover several types of input data, including atomic structures, atomistic images, spectra, and text. For ES, we consider multiple ES approaches, software packages, pseudopotentials, materials, and properties, comparing results to experiment. For FF, we compare multiple approaches for material property predictions. For QC, we benchmark Hamiltonian simulations using various quantum algorithms and circuits. Finally, for experiments, we use the inter-laboratory approach to establish benchmarks. There are 1281 contributions to 274 benchmarks using 152 methods with more than 8 million data-points, and the leaderboard is continuously expanding. The JARVIS-Leaderboard is available at the website: https://pages.nist.gov/jarvis_leaderboard △ Less

Submitted 26 March, 2024; v1 submitted 20 June, 2023; originally announced June 2023.

Procedures for assessing the stability of proposed topological materials

Authors: Jeonghwan Ahn, Seoung-Hun Kang, Mao-Hua Du, Mina Yoon, Jaron T. Krogel, Fernando A. Reboredo

Abstract: We investigate the stability of MnPb$_{2}$Bi$_{2}$Te$_{6}$ (MPBT), which is predicted to be a magnetic topological insulator (TI), using density functional theory calculations. Our analysis includes various measures such as enthalpies of formation, Helmholtz free energies, defect formation energies, and dynamical stability. Our thermodynamic analysis shows that the phonon contribution to the energ… ▽ More We investigate the stability of MnPb$_{2}$Bi$_{2}$Te$_{6}$ (MPBT), which is predicted to be a magnetic topological insulator (TI), using density functional theory calculations. Our analysis includes various measures such as enthalpies of formation, Helmholtz free energies, defect formation energies, and dynamical stability. Our thermodynamic analysis shows that the phonon contribution to the energy gain from finite temperature is estimated to be less than 10~meV/atom, which may not be sufficient to stabilize MPBT at high temperatures, even with the most favorable reactions starting from binaries. While MPBT is generally robust against the formation of various defects, we find that anti-site defect formation of $\text{Mn}_{\text{Pb}}$ is the most likely to occur, with corresponding energy less than 60~meV. This can be attributed to the significant energy cost from compressive strain at the PbTe layer. Our findings suggest that MPBT is on the brink of stability in terms of thermodynamics and defect formation, underscoring the importance of conducting systematic analyses of the stability of proposed TIs, including MPBT, for their practical utilization. This study offers valuable insights into the design and synthesis of desirable magnetic TI materials with robust stabilities. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Comments: 18 pages, 4 figures

Metastability and topology in the magnetic topological insulator MnBi$_{2}$Te$_{4}$

Authors: Jeonghwan Ahn, Seoung-Hun Kang, Mina Yoon, Panchapakesan Ganesh, Jaron T. Krogel

Abstract: We study the effect of stacking faults on the topological properties of the magnetic topological insulator MnBi$_{2}$Te$_{4}$ (MBT) using density functional theory calculations and the Hubbard $U$ being tuned with many-body diffusion Monte Carlo techniques. We show that a modest deviation from the equilibrium interlayer distance leads to a topological phase transition from a non-trivial to a trivi… ▽ More We study the effect of stacking faults on the topological properties of the magnetic topological insulator MnBi$_{2}$Te$_{4}$ (MBT) using density functional theory calculations and the Hubbard $U$ being tuned with many-body diffusion Monte Carlo techniques. We show that a modest deviation from the equilibrium interlayer distance leads to a topological phase transition from a non-trivial to a trivial topology, suggesting that tuning the interlayer coupling by adjusting the interlayer distance alone can lead to different topological phases. Interestingly, due to the locally increased interlayer distance of the top layer, a metastable stacking fault in MBT leads to a nearly gapless state at the topmost layer due to charge redistribution as the topmost layer recedes. We further find evidence of spin-momentum locking in the surface state along with a weak preservation of the band inversion in the near gapless state, which is indicative of the non-trivial topological surface states for the metastable stacking fault. Our findings provide a possible explanation for reconciling the long-standing puzzle of gapped and gapless states on MBT surfaces. △ Less

Submitted 16 May, 2023; originally announced May 2023.

Comments: 18 pages, 4 figures

The role of electron correlations in the electronic structure of putative Chern magnet TbMn$_6$Sn$_6$

Authors: Abdulgani Annaberdiyev, Subhasish Mandal, Lubos Mitas, Jaron T. Krogel, Panchapakesan Ganesh

Abstract: A member of the RMn$_6$Sn$_6$ rare-earth family materials, TbMn$_6$Sn$_6$, recently showed experimental signatures of the realization of a quantum-limit Chern magnet. In this work, we use quantum Monte Carlo (QMC) and density functional theory with Hubbard $U$ (DFT$+U$) calculations to examine the electronic structure of TbMn$_6$Sn$_6$. To do so, we optimize accurate, correlation-consistent pseudo… ▽ More A member of the RMn$_6$Sn$_6$ rare-earth family materials, TbMn$_6$Sn$_6$, recently showed experimental signatures of the realization of a quantum-limit Chern magnet. In this work, we use quantum Monte Carlo (QMC) and density functional theory with Hubbard $U$ (DFT$+U$) calculations to examine the electronic structure of TbMn$_6$Sn$_6$. To do so, we optimize accurate, correlation-consistent pseudopotentials for Tb and Sn using coupled-cluster and configuration-interaction (CI) methods. We find that DFT$+U$ and single-reference QMC calculations suffer from the same overestimation of the magnetic moments as meta-GGA and hybrid density functional approximations. Our findings point to the need for improved orbitals/wavefunctions for this class of materials, such as natural orbitals from CI, or for the inclusion of multi-reference effects that capture the static correlations for an accurate prediction of magnetic properties. DFT$+U$ with Mn magnetic moments adjusted to experiment predict the Dirac crossing in bulk to be close to the Fermi level, within $\sim 120$ meV, in agreement with the experiments. Our non-stoichiometric slab calculations show that the Dirac crossing approaches even closer to the Fermi level, suggesting the possible realization of Chern magnetism in this limit. △ Less

Submitted 28 September, 2023; v1 submitted 3 February, 2023; originally announced February 2023.

Comments: This is the peer-reviewed, accepted version of the manuscript. 17 pages, 10 figures. https://doi.org/10.1038/s41535-023-00583-6

Journal ref: npj Quantum Mater. 8, 1-13 (2023)

Machine Learning Diffusion Monte Carlo Energies

Authors: Kevin Ryczko, Jaron T. Krogel, Isaac Tamblyn

Abstract: We present two machine learning methodologies that are capable of predicting diffusion Monte Carlo (DMC) energies with small datasets (~60 DMC calculations in total). The first uses voxel deep neural networks (VDNNs) to predict DMC energy densities using Kohn-Sham density functional theory (DFT) electron densities as input. The second uses kernel ridge regression (KRR) to predict atomic contributi… ▽ More We present two machine learning methodologies that are capable of predicting diffusion Monte Carlo (DMC) energies with small datasets (~60 DMC calculations in total). The first uses voxel deep neural networks (VDNNs) to predict DMC energy densities using Kohn-Sham density functional theory (DFT) electron densities as input. The second uses kernel ridge regression (KRR) to predict atomic contributions to the DMC total energy using atomic environment vectors as input (we used atom centred symmetry functions, atomic environment vectors from the ANI models, and smooth overlap of atomic positions). We first compare the methodologies on pristine graphene lattices, where we find the KRR methodology performs best in comparison to gradient boosted decision trees, random forest, gaussian process regression, and multilayer perceptrons. In addition, KRR outperforms VDNNs by an order of magnitude. Afterwards, we study the generalizability of KRR to predict the energy barrier associated with a Stone-Wales defect. Lastly, we move from 2D to 3D materials and use KRR to predict total energies of liquid water. In all cases, we find that the KRR models are more accurate than Kohn-Sham DFT and all mean absolute errors are less than chemical accuracy. △ Less

Submitted 5 October, 2022; v1 submitted 9 May, 2022; originally announced May 2022.

DFT+U and Quantum Monte Carlo study of electronic and optical properties of AgNiO$_2$ and AgNi$_{1-x}$Co$_{x}$O$_2$ delafossite

Authors: Hyeondeok Shin, Panchapakesan Ganesh, Paul R. C. Kent, Anouar Benali, Anand Bhattacharya, Ho Nyung Lee, Olle Heinonen, Jaron T. Krogel

Abstract: As the only semimetallic $d^{10}$-based delafossite, AgNiO$_2$ has received a great deal of attention due to both its unique semimetallicity and its antiferromagnetism in the NiO$_2$ layer that is coupled with a lattice distortion. In contrast, other delafossites such as AgCoO$_2$ are insulating. Here we study how the electronic structure of AgNi$_{1-x}$Co$_{x}$O$_2$ alloys vary with Ni/Co concent… ▽ More As the only semimetallic $d^{10}$-based delafossite, AgNiO$_2$ has received a great deal of attention due to both its unique semimetallicity and its antiferromagnetism in the NiO$_2$ layer that is coupled with a lattice distortion. In contrast, other delafossites such as AgCoO$_2$ are insulating. Here we study how the electronic structure of AgNi$_{1-x}$Co$_{x}$O$_2$ alloys vary with Ni/Co concentration, in order to investigate the electronic properties and phase stability of the intermetallics. While the electronic and magnetic structure of delafossites have been studied using Density Functional Theory (DFT), earlier studies have not included corrections for strong on-site Coulomb interactions. In order to treat these interactions accurately, in this study we use Quantum Monte Carlo (QMC) simulations to obtain accurate estimates for the electronic and magnetic properties of AgNiO$_2$. By comparison to DFT results we show that these electron correlations are critical to account for. We show that Co do** on the magnetic Ni sites results in a metal-insulator transition near $x\sim 0.33$, and reentrant behavior near $x\sim 0.66$ △ Less

Submitted 21 July, 2023; v1 submitted 9 April, 2022; originally announced April 2022.

Comments: 25 Pages, 12 figures

Magnetic measures of purity for MnBi$_2$Te$_4$

Authors: M. Chandler Bennett, Jeonghwan Ahn, Anh Pham, Guangming Wang, Panchapakesan Ganesh, Jaron T. Krogel

Abstract: The intrinsically anti-ferromagnetic topological insulator, MnBi$_2$Te$_4$ (MBT), has garnered significant attention recently. The excitement for this layered van der Waals bonded compound stems from its potential to host numerous exotic topological quantum states. For instance, quantum anomalous Hall states are predicted for odd-layer compounds and axion insulator states for the even-layer compou… ▽ More The intrinsically anti-ferromagnetic topological insulator, MnBi$_2$Te$_4$ (MBT), has garnered significant attention recently. The excitement for this layered van der Waals bonded compound stems from its potential to host numerous exotic topological quantum states. For instance, quantum anomalous Hall states are predicted for odd-layer compounds and axion insulator states for the even-layer compounds. Unfortunately, the realization of these phenomena has been hindered by experimental challenges such as the existence of negative charge carriers, i.e., electron do**, which have been linked to anti-site defects among the Mn and Bi sub-lattices. Based on high level diffusion Monte Carlo (DMC) and DMC-tuned DFT+U calculations, we provide benchmark quality results for the bulk Mn magnetization as well as for Mn$_{Bi}$ and Bi$_{Mn}$ defects. We use this information to refine and extend models that estimate the anti-site defect concentration in actual MBT samples when combined with data from magnetic susceptibility and intermediate field magnetization measurements. Our models are validated through favorable comparison with prior experimental studies that obtained both magnetic and site occupancy data. We then extend our estimates to a larger set of prior samples to identify a probable zone of low defect density that has yet to be reached in synthesis. We anticipate our theoretically based magnetic purity measures may be used as minimization targets in the cycle of refinement needed to synthesize MBT samples with low anti-site defect concentrations and more reproducible topological properties. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Comments: 24 pages, 5 figures

Correlative nanoscale imaging of strained hBN spin defects

Authors: David Curie, Jaron T. Krogel, Lukas Cavar, Abhishek Solanki, Pramey Upadhyaya, Tongcang Li, Yun-Yi Pai, Michael Chilcote, Vasudevan Iyer, Alex Puretzky, Ilia Ivanov, Mao-Hua Du, Fernando Reboredo, Benjamin Lawrie

Abstract: Spin defects like the negatively charged boron vacancy color center ($V_B^-$) in hexagonal boron nitride (hBN) may enable new forms of quantum sensing with near-surface defects in layered van der Waals heterostructures. Here, we reveal the effect of strain associated with creases in hBN flakes on $V_B^-$ and $V_B$ color centers in hBN with correlative cathodoluminescence and photoluminescence micr… ▽ More Spin defects like the negatively charged boron vacancy color center ($V_B^-$) in hexagonal boron nitride (hBN) may enable new forms of quantum sensing with near-surface defects in layered van der Waals heterostructures. Here, we reveal the effect of strain associated with creases in hBN flakes on $V_B^-$ and $V_B$ color centers in hBN with correlative cathodoluminescence and photoluminescence microscopies. We observe strong localized enhancement and redshifting of the $V_B^-$ luminescence at creases, consistent with density functional theory calculations showing $V_B^-$ migration toward regions with moderate uniaxial compressive strain. The ability to manipulate these spin defects with highly localized strain offers intriguing possibilities for future 2D quantum sensors. △ Less

Submitted 18 March, 2022; originally announced March 2022.

A new generation of effective core potentials from correlated and spin-orbit calculations: selected heavy elements

Authors: Guangming Wang, Benjamin Kincaid, Haihan Zhou, Abdulgani Annaberdiyev, M. Chandler Bennett, Jaron T. Krogel, Lubos Mitas

Abstract: We introduce new correlation consistent effective core potentials (ccECPs) for the elements I, Te, Bi, Ag, Au, Pd, Ir, Mo, and W with $4d$, $5d$, $6s$ and $6p$ valence spaces. These ccECPs are given as a sum of spin-orbit averaged relativistic effective potential (AREP) and effective spin-orbit (SO) terms. The construction involves several steps with increasing refinements from more simple to full… ▽ More We introduce new correlation consistent effective core potentials (ccECPs) for the elements I, Te, Bi, Ag, Au, Pd, Ir, Mo, and W with $4d$, $5d$, $6s$ and $6p$ valence spaces. These ccECPs are given as a sum of spin-orbit averaged relativistic effective potential (AREP) and effective spin-orbit (SO) terms. The construction involves several steps with increasing refinements from more simple to fully correlated methods. The optimizations are carried out with objective functions that include weighted many-body atomic spectra, norm-conservation criteria, and spin-orbit splittings. Transferability tests involve molecular binding curves of corresponding hydride and oxide dimers. The constructed ccECPs are systematically better and in a few cases on par with previous effective core potential (ECP) tables on all tested criteria and provide a significant increase in accuracy for valence-only calculations with these elements. Our study confirms the importance of the AREP part in determining the overall quality of the ECP even in the presence of sizable spin-orbit effects. The subsequent quantum Monte Carlo (QMC) calculations point out the importance of accurate trial wave functions which in some cases (mid series transition elements) require treatment well beyond single-reference. △ Less

Submitted 11 February, 2022; v1 submitted 9 February, 2022; originally announced February 2022.

Comments: 24 pages, 27 figures

Origin of Metal-Insulator Transitions in Correlated Perovskite Metals

Authors: M. Chandler Bennett, Guoxiang Hu, Guangming Wang, Olle Heinonen, Paul R. C. Kent, Jaron T. Krogel, Panchapakesan Ganesh

Abstract: The mechanisms that drive metal-to-insulator transitions (MIT) in correlated solids are not fully understood. For example, the perovskite (PV) SrCoO3 is a FM metal while the oxygen-deficient (n-doped) brownmillerite (BM) SrCoO2.5 is an anti-ferromagnetic (AFM) insulator. Given the magnetic and structural transitions that accompany the MIT, the driver for such a MIT transition is unclear. We also o… ▽ More The mechanisms that drive metal-to-insulator transitions (MIT) in correlated solids are not fully understood. For example, the perovskite (PV) SrCoO3 is a FM metal while the oxygen-deficient (n-doped) brownmillerite (BM) SrCoO2.5 is an anti-ferromagnetic (AFM) insulator. Given the magnetic and structural transitions that accompany the MIT, the driver for such a MIT transition is unclear. We also observe that the perovskite metals LaNiO3, SrFeO3, and SrCoO3 also undergo MIT when n-doped via high-to-low valence compositional changes. Also, pressurizing the insulating BM SrCoO2.5 phase, drives a gap closing. Using DFT and correlated diffusion Monte Carlo approaches we demonstrate that the ABO3 perovskites most prone to MIT are self hole-doped materials, reminiscent of a negative charge-transfer system. Upon n-do** away from the negative-charge transfer metallic phase, an underlying charge-lattice (or e-phonon) coupling drives the system to a bond-disproportionated gapped state, thereby achieving ligand hole passivation at certain sites only, leading to charge-disproportionated states. The size of the gap opened is correlated with the size of the hole-filling at these ligand sites. This suggests that the interactions driving the gap opening to realize a MIT even in correlated metals is the charge-transfer energy, but it couples with the underlying phonons to enable the transition to the insulating phase. Other orderings (magnetic, charge, etc.) driven by weaker interactions are secondary and may assist gap openings at small do**s, but its the charge-transfer energy that predominantly determines the bandgap, with a negative energy preferring the metallic phase. This n-do** can be achieved by modulations in stoichiometry or composition or pressure. Hence, controlling the amount of the ligand-hole is key in controlling MIT. We compare our predictions to experiments where possible. △ Less

Submitted 25 January, 2022; v1 submitted 17 March, 2021; originally announced March 2021.

Towards a Systematic Improvement of the Fixed-Node Approximation in Diffusion Monte Carlo for Solids -- A Case Study In Diamond

Authors: Anouar Benali, Kevin Gasperich, Kenneth D. Jordan, Thomas Applencourt, Ye Luo, M. Chandler Bennett, Jaron T. Krogel, Luke Shulenburger, Paul R. C. Kent, Pierre-François Loos, Anthony Scemama, Michel Caffarel

Abstract: While Diffusion Monte Carlo (DMC) is in principle an exact stochastic method for \textit{ab initio} electronic structure calculations, in practice the fermionic sign problem necessitates the use of the fixed-node approximation and trial wavefunctions with approximate nodes (or zeros) must be used. This approximation introduces a variational error in the energy that potentially can be tested and sy… ▽ More While Diffusion Monte Carlo (DMC) is in principle an exact stochastic method for \textit{ab initio} electronic structure calculations, in practice the fermionic sign problem necessitates the use of the fixed-node approximation and trial wavefunctions with approximate nodes (or zeros) must be used. This approximation introduces a variational error in the energy that potentially can be tested and systematically improved. Here, we present a computational method that produces trial wavefunctions with systematically improvable nodes for DMC calculations of periodic solids. These trial wavefunctions are efficiently generated with the configuration interaction using a perturbative selection made iteratively (CIPSI) method. A simple protocol in which both exact and approximate results for finite supercells are used to extrapolate to the thermodynamic limit is introduced. △ Less

Submitted 29 October, 2020; v1 submitted 22 July, 2020; originally announced July 2020.

Structural, Electronic and Magnetic Properties of Bulk and Epitaxial LaCoO$_3$ through Diffusion Monte Carlo

Authors: Kayahan Saritas, Jaron T. Krogel, Satoshi Okamoto, Ho-Nyung Lee, Fernando A. Reboredo

Abstract: Magnetism in lanthanum cobaltite (LCO, LaCoO$_3$) appears to be strongly dependent on strain, defects, and nanostructuring. LCO on strontium titanate (STO, SrTiO$_3$) is a ferromagnet with an interesting strain relaxation mechanism that yields a lattice modulation. However, the driving force of the ferromagnetism is still controversial. Experiments debate between a vacancy-driven or strain-driven… ▽ More Magnetism in lanthanum cobaltite (LCO, LaCoO$_3$) appears to be strongly dependent on strain, defects, and nanostructuring. LCO on strontium titanate (STO, SrTiO$_3$) is a ferromagnet with an interesting strain relaxation mechanism that yields a lattice modulation. However, the driving force of the ferromagnetism is still controversial. Experiments debate between a vacancy-driven or strain-driven mechanism for the ferromagnetism of epitaxial LCO. We found that a weak lateral modulation of the superstructure is sufficient to promote ferromagnetism. We find that ferromagnetism appears under uniaxial compression and expansion. Although earlier experiments suggest that bulk LCO is nonmagnetic, we find an antiferromagnetic ground state for bulk LCO. We discuss the recent experiments which indicate a more complicated picture for bulk magnetism and a closer agreement with our calculations. Role of defects are also discussed through excited state calculations. △ Less

Submitted 28 August, 2019; v1 submitted 7 August, 2019; originally announced August 2019.

Comments: 12 pages, 9 figures

Diffusion quantum Monte Carlo calculations of SrFeO${_3}$ and LaFeO${_3}$

Authors: Juan A. Santana, Jaron T. Krogel, Paul R. C. Kent, Fernando A. Reboredo

Abstract: The equations of state, formation energy and migration energy barrier of the oxygen vacancy in SrFeO${_3}$ and LaFeO${_3}$ were calculated with the diffusion quantum Monte Carlo (DMC) method. Calculations were also performed with various Density Functional Theory (DFT) approximations for comparison. DMC reproduces the measured cohesive energies of these materials with errors below 0.23(5) eV and t… ▽ More The equations of state, formation energy and migration energy barrier of the oxygen vacancy in SrFeO${_3}$ and LaFeO${_3}$ were calculated with the diffusion quantum Monte Carlo (DMC) method. Calculations were also performed with various Density Functional Theory (DFT) approximations for comparison. DMC reproduces the measured cohesive energies of these materials with errors below 0.23(5) eV and the structural properties within 1% of the experimental values. The DMC formation energies of the oxygen vacancy in SrFeO${_3}$ and LaFeO${_3}$ under oxygen-rich conditions are 1.3(1) and 6.24(7) eV, respectively. Similar calculations with semi-local DFT approximations for LaFeO$_3$ yielded vacancy formation energies 1.5 eV lower. Comparison of charge density evaluated with DMC and DFT approximations shows that DFT tends to overdelocalize the electrons in defected SrFeO${_3}$ and LaFeO${_3}$. Calculations with DMC and LDA yield similar vacancy migration energy barriers, indicating that steric/electrostatic effects mainly determine migration barriers in these materials. △ Less

Submitted 1 July, 2017; v1 submitted 28 April, 2017; originally announced April 2017.

Comments: 25 pages, 4 figures

Magnitude of pseudopotential localization errors in fixed node diffusion quantum Monte Carlo

Authors: Jaron T. Krogel, Paul R. C. Kent

Abstract: Growth in computational resources has lead to the application of real space diffusion quantum Monte Carlo (DMC) to increasingly heavy elements. Although generally assumed to be small, we find that when using standard techniques the pseudopotential localization error can be large, on the order of an electron volt for an isolated cerium atom. We formally show that localization error can be reduced t… ▽ More Growth in computational resources has lead to the application of real space diffusion quantum Monte Carlo (DMC) to increasingly heavy elements. Although generally assumed to be small, we find that when using standard techniques the pseudopotential localization error can be large, on the order of an electron volt for an isolated cerium atom. We formally show that localization error can be reduced to zero with improvements to the Jastrow factor alone and we define a metric of Jastrow sensitivity that may be useful in the design of pseudopotentials. We employ an extrapolation scheme to extract the bare fixed node energy and estimate the localization error in both the locality approximation and the T-moves schemes for the Ce atom in charge states 3+ and 4+. The locality approximation exhibits the lowest Jastrow sensitivity and generally smaller localization errors than T-moves, although the locality approximation energy approaches the localization free limit from above/below for the 3+/4+ charge state. We find that energy minimized Jastrow factors including three-body electron-electron-ion terms are the most effective at reducing localization error for both the locality approximation and T-moves. Less complex or variance minimized Jastrows are generally less effective. Our results suggest that further improvements to Jastrow factors and trial wavefunction forms will be necessary to reduce localization errors to chemical accuracy in calculations of heavy elements. △ Less

Submitted 30 March, 2017; originally announced March 2017.

Comments: 8 pages, 2 figures

Cohesive energy and structural parameters of binary oxides of groups IIA and IIIB from diffusion quantum Monte Carlo

Authors: Juan A. Santana, Jaron T. Krogel, Paul R. C. Kent, Fernando A. Reboredo

Abstract: We have applied the diffusion quantum Monte Carlo (DMC) method to calculate the cohesive energy and the structural parameters of the binary oxides CaO, SrO, BaO, Sc2O3, Y2O3 and La2O3. The aim of our calculations is to systematically quantify the accuracy of the DMC method to study this type of metal oxides. The DMC results were compared with local, semi-local and hybrid Density Functional Theory… ▽ More We have applied the diffusion quantum Monte Carlo (DMC) method to calculate the cohesive energy and the structural parameters of the binary oxides CaO, SrO, BaO, Sc2O3, Y2O3 and La2O3. The aim of our calculations is to systematically quantify the accuracy of the DMC method to study this type of metal oxides. The DMC results were compared with local, semi-local and hybrid Density Functional Theory (DFT) approximations as well as with experimental measurements. The DMC method yields cohesive energies for these oxides with a mean absolute deviation from experimental measurements of 0.18(2) eV, while with local, semi-local and hybrid DFT approximations the deviation is 3.06, 0.94 and 1.23 eV, respectively. For lattice constants, the mean absolute deviation in DMC, local, semi-local and hybrid DFT approximations, are 0.017(1), 0.07, 0.05 and 0.04 Å, respectively. DMC is highly accurate method, outperforming the DFT approximations in describing the cohesive energies and structural parameters of these binary oxides. △ Less

Submitted 22 August, 2016; originally announced August 2016.

Comments: 22 pages, 3 figures

Journal ref: The Journal of Chemical Physics 144, 174707 (2016)

Phase Stability of TiO$_2$ Polymorphs from Diffusion Quantum Monte Carlo

Authors: Ye Luo, Anouar Benali, Luke Shulenburger, Jaron T. Krogel, Olle Heinonen, Paul R. C. Kent

Abstract: Titanium dioxide, TiO$_2$, has multiple applications in catalysis, energy conversion and memristive devices because of its electronic structure. Most of these applications utilize the naturally existing phases: rutile, anatase and brookite. Despite the simple form of TiO$_2$ and its wide uses, there is long-standing disagreement between theory and experiment on the energetic ordering of these phas… ▽ More Titanium dioxide, TiO$_2$, has multiple applications in catalysis, energy conversion and memristive devices because of its electronic structure. Most of these applications utilize the naturally existing phases: rutile, anatase and brookite. Despite the simple form of TiO$_2$ and its wide uses, there is long-standing disagreement between theory and experiment on the energetic ordering of these phases that has never been resolved. We present the first analysis of phase stability at zero temperature using the highly accurate many-body fixed node diffusion Quantum Monte Carlo (QMC) method. We also include the effects of temperature by calculating the Helmholtz free energy including both internal energy and vibrational contributions from density functional perturbation theory based quasi harmonic phonon calculations. Our QMC calculations find that anatase is the most stable phase at zero temperature, consistent with many previous mean-field calculations. However, at elevated temperatures, rutile becomes the most stable phase. For all finite temperatures, brookite is always the least stable phase. △ Less

Submitted 15 September, 2016; v1 submitted 25 July, 2016; originally announced July 2016.

Journal ref: New J. Phys. 18 (2016) 113049

Quantum Monte Carlo analysis of a charge ordered insulating antiferromagnet: the Ti$_4$O$_7$ Magnéli phase

Authors: Anouar Benali, Luke Shulenburger, Jaron T. Krogel, Xiaoliang Zhong, Paul R. C. Kent, Olle Heinonen

Abstract: The Magnéli phase Ti$_4$O$_7$ is an important transition metal oxide with a wide range of applications because of its interplay between charge, spin, and lattice degrees of freedom. At low temperatures, it has non-trivial magnetic states very close in energy, driven by electronic exchange and correlation interactions. We have examined three low-lying states, one ferromagnetic and two antiferromagn… ▽ More The Magnéli phase Ti$_4$O$_7$ is an important transition metal oxide with a wide range of applications because of its interplay between charge, spin, and lattice degrees of freedom. At low temperatures, it has non-trivial magnetic states very close in energy, driven by electronic exchange and correlation interactions. We have examined three low-lying states, one ferromagnetic and two antiferromagnetic, and calculated their energies as well as Ti spin moment distributions using highly accurate Quantum Monte Carlo methods. We compare our results to those obtained from density functional theory-based methods that include approximate corrections for exchange and correlation. Our results confirm the nature of the states and their ordering in energy, as compared with density-functional theory methods. However, the energy differences and spin distributions differ. A detailed analysis suggests that non-local exchange-correlation functionals, in addition to other approximations such as LDA+U to account for correlations, are needed to simultaneously obtain better estimates for spin moments, distributions, energy differences and energy gaps. △ Less

Submitted 7 June, 2016; v1 submitted 30 March, 2016; originally announced March 2016.

Comments: Accepter for publication, Physical Chemistry Chemical Physics 2016

Energy density matrix formalism for interacting quantum systems: a quantum Monte Carlo study

Authors: Jaron T. Krogel, Jeongnim Kim, Fernando A. Reboredo

Abstract: We develop an energy density matrix that parallels the one-body reduced density matrix (1RDM) for many-body quantum systems. Just as the density matrix gives access to the number density and occupation numbers, the energy density matrix yields the energy density and orbital occupation energies. The eigenvectors of the matrix provide a natural orbital partitioning of the energy density while the ei… ▽ More We develop an energy density matrix that parallels the one-body reduced density matrix (1RDM) for many-body quantum systems. Just as the density matrix gives access to the number density and occupation numbers, the energy density matrix yields the energy density and orbital occupation energies. The eigenvectors of the matrix provide a natural orbital partitioning of the energy density while the eigenvalues comprise a single particle energy spectrum obeying a total energy sum rule. For mean-field systems the energy density matrix recovers the exact spectrum. When correlation becomes important, the occupation energies resemble quasiparticle energies in some respects. We explore the occupation energy spectrum for the finite 3D homogeneous electron gas in the metallic regime and an isolated oxygen atom with ground state quantum Monte Carlo techniques implemented in the QMCPACK simulation code. The occupation energy spectrum for the homogeneous electron gas can be described by an effective mass below the Fermi level. Above the Fermi level evanescent behavior in the occupation energies is observed in similar fashion to the occupation numbers of the 1RDM. A direct comparison with total energy differences shows a quantitative connection between the occupation energies and electron addition and removal energies for the electron gas. For the oxygen atom, the association between the ground state occupation energies and particle addition and removal energies becomes only qualitative. The energy density matrix provides a new avenue for describing energetics with quantum Monte Carlo methods which have traditionally been limited to total energies. △ Less

Submitted 9 July, 2014; originally announced July 2014.

Comments: 9 pages, 5 figures

Structural Stability and Defect Energetics of ZnO from Diffusion Quantum Monte Carlo

Authors: Juan A. Santana, Jaron T. Krogel, Jeongnim Kim, Paul R. C. Kent, Fernando A. Reboredo

Abstract: We have applied the many-body ab-initio diffusion quantum Monte Carlo (DMC) method to study Zn and ZnO crystals under pressure, and the energetics of the oxygen vacancy, zinc interstitial and hydrogen impurities in ZnO. We show that DMC is an accurate and practical method that can be used to characterize multiple properties of materials that are challenging for density functional theory approximat… ▽ More We have applied the many-body ab-initio diffusion quantum Monte Carlo (DMC) method to study Zn and ZnO crystals under pressure, and the energetics of the oxygen vacancy, zinc interstitial and hydrogen impurities in ZnO. We show that DMC is an accurate and practical method that can be used to characterize multiple properties of materials that are challenging for density functional theory approximations. DMC agrees with experimental measurements to within 0.3 eV, including the band-gap of ZnO, the ionization potential of O and Zn, and the atomization energy of O$_2$, ZnO dimer, and wurtzite ZnO. DMC predicts the oxygen vacancy as a deep donor with a formation energy of 5.0(2) eV under O-rich conditions and thermodynamic transition levels located between 1.8 and 2.5 eV from the valence band maximum. Our DMC results indicate that the concentration of zinc interstitial and hydrogen impurities in ZnO should be low under n-type, and Zn- and H-rich conditions because these defects have formation energies above 1.4 eV under these conditions. Comparison of DMC and hybrid functionals shows that these DFT approximations can be parameterized to yield a general correct qualitative description of ZnO. However, the formation energy of defects in ZnO evaluated with DMC and hybrid functionals can differ by more than 0.5 eV. △ Less

Submitted 30 April, 2015; v1 submitted 12 June, 2014; originally announced June 2014.

Comments: 43 pages, 10 figures

Journal ref: J. Chem. Phys. 142, 164705 (2015)

Ab initio quantum Monte Carlo calculations of spin superexchange in cuprates: the benchmarking case of Ca$_2$CuO$_3$

Authors: Kateryna Foyevtsova, Jaron T. Krogel, Jeongnim Kim, P. R. C. Kent, Elbio Dagotto, Fernando A. Reboredo

Abstract: In view of the continuous theoretical efforts aimed at an accurate microscopic description of the strongly correlated transition metal oxides and related materials, we show that with continuum quantum Monte Carlo (QMC) calculations it is possible to obtain the value of the spin superexchange coupling constant of a copper oxide in a quantitatively excellent agreement with experiment. The variationa… ▽ More In view of the continuous theoretical efforts aimed at an accurate microscopic description of the strongly correlated transition metal oxides and related materials, we show that with continuum quantum Monte Carlo (QMC) calculations it is possible to obtain the value of the spin superexchange coupling constant of a copper oxide in a quantitatively excellent agreement with experiment. The variational nature of the QMC total energy allows us to identify the best trial wave function out of the available pool of wave functions, which makes the approach essentially free from adjustable parameters and thus truly ab initio. The present results on magnetic interactions suggest that QMC is capable of accurately describing ground state properties of strongly correlated materials. △ Less

Submitted 9 July, 2014; v1 submitted 22 February, 2014; originally announced February 2014.

Comments: Published in Physical Review X

Journal ref: Phys. Rev. X 4, 031003 (2014)

The Quantum Energy Density: Improved Efficiency for Quantum Monte Carlo

Authors: Jaron T. Krogel, Min Yu, Jeongnim Kim, David M. Ceperley

Abstract: We establish a physically meaningful representation of a quantum energy density for use in Quantum Monte Carlo calculations. The energy density operator, defined in terms of Hamiltonian components and density operators, returns the correct Hamiltonian when integrated over a volume containing a cluster of particles. This property is demonstrated for a helium-neon "gas," showing that atomic energies… ▽ More We establish a physically meaningful representation of a quantum energy density for use in Quantum Monte Carlo calculations. The energy density operator, defined in terms of Hamiltonian components and density operators, returns the correct Hamiltonian when integrated over a volume containing a cluster of particles. This property is demonstrated for a helium-neon "gas," showing that atomic energies obtained from the energy density correspond to eigenvalues of isolated systems. The formation energies of defects or interfaces are typically calculated as total energy differences. Using a model of delta-doped silicon (where dopant atoms form a thin plane) we show how interfacial energies can be calculated more efficiently with the energy density, since the region of interest is small. We also demonstrate how the energy density correctly transitions to the bulk limit away from the interface where the correct energy is obtainable from a separate total energy calculation. △ Less

Submitted 20 May, 2013; originally announced May 2013.

Comments: 11 pages, 4 figures