-
Towards establishing best practice in the analysis of hydrogen and deuterium by atom probe tomography
Authors:
Baptiste Gault,
Aparna Saksena,
Xavier Sauvage,
Paul Bagot,
Leonardo S. Aota,
Jonas Arlt,
Lisa T. Belkacemi,
Torben Boll,
Yi-Sheng Chen,
Luke Daly,
Milos B. Djukic,
James O. Douglas,
Maria J. Duarte,
Peter J. Felfer,
Richard G. Forbes,
**g Fu,
Hazel M. Gardner,
Ryota Gemma,
Stephan S. A. Gerstl,
Yilun Gong,
Guillaume Hachet,
Severin Jakob,
Benjamin M. Jenkins,
Megan E. Jones,
Heena Khanchandani
, et al. (20 additional authors not shown)
Abstract:
As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enab…
▽ More
As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enabling H map**, including local hydrogen concentration analyses at specific microstructural features, is essential for understanding the multiple ways that H affect the properties of materials, including for instance embrittlement mechanisms and their synergies, but also spatial map** and quantification of hydrogen isotopes is essential to accurately predict tritium inventory of future fusion power plants, ensuring their safe and efficient operation for example. Atom probe tomography (APT) has the intrinsic capabilities for detecting hydrogen (H), and deuterium (D), and in principle the capacity for performing quantitative map** of H within a material's microstructure. Yet the accuracy and precision of H analysis by APT remain affected by the influence of residual hydrogen from the ultra-high vacuum chamber that can obscure the signal of H from within the material, along with a complex field evaporation behavior. The present article reports the essence of discussions at a focused workshop held at the Max-Planck Institute for Sustainable Materials in April 2024. The workshop was organized to pave the way to establishing best practices in reporting APT data for the analysis of H. We first summarize the key aspects of the intricacies of H analysis by APT and propose a path for better reporting of the relevant data to support interpretation of APT-based H analysis in materials.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
Critical feature learning in deep neural networks
Authors:
Kirsten Fischer,
Javed Lindner,
David Dahmen,
Zohar Ringel,
Michael Krämer,
Moritz Helias
Abstract:
A key property of neural networks driving their success is their ability to learn features from data. Understanding feature learning from a theoretical viewpoint is an emerging field with many open questions. In this work we capture finite-width effects with a systematic theory of network kernels in deep non-linear neural networks. We show that the Bayesian prior of the network can be written in c…
▽ More
A key property of neural networks driving their success is their ability to learn features from data. Understanding feature learning from a theoretical viewpoint is an emerging field with many open questions. In this work we capture finite-width effects with a systematic theory of network kernels in deep non-linear neural networks. We show that the Bayesian prior of the network can be written in closed form as a superposition of Gaussian processes, whose kernels are distributed with a variance that depends inversely on the network width N . A large deviation approach, which is exact in the proportional limit for the number of data points $P = αN \rightarrow \infty$, yields a pair of forward-backward equations for the maximum a posteriori kernels in all layers at once. We study their solutions perturbatively to demonstrate how the backward propagation across layers aligns kernels with the target. An alternative field-theoretic formulation shows that kernel adaptation of the Bayesian posterior at finite-width results from fluctuations in the prior: larger fluctuations correspond to a more flexible network prior and thus enable stronger adaptation to data. We thus find a bridge between the classical edge-of-chaos NNGP theory and feature learning, exposing an intricate interplay between criticality, response functions, and feature scale.
△ Less
Submitted 17 May, 2024;
originally announced May 2024.
-
The nontrivial effects of annealing on superconducting properties of Nb single crystals
Authors:
Amlan Datta,
Kamal R. Joshi,
Giulia Berti,
Sunil Ghimire,
Aidan Goerdt,
Makariy A. Tanatar,
Deborah L. Schlagel,
Matthew F. Besser,
Dapeng **g,
Matthew Kramer,
Maria Iavarone,
Ruslan Prozorov
Abstract:
The effect of annealing on the superconducting properties of niobium single crystals cut from the same master boule was studied by local and global magnetic measurements, as well as scanning tunneling microscopy (STM). The formation of large hydride precipitates was observed in unannealed samples. The variation in structural and magnetic properties was studied after annealing under high vacuum at…
▽ More
The effect of annealing on the superconducting properties of niobium single crystals cut from the same master boule was studied by local and global magnetic measurements, as well as scanning tunneling microscopy (STM). The formation of large hydride precipitates was observed in unannealed samples. The variation in structural and magnetic properties was studied after annealing under high vacuum at 800 C, 1400 C, and near the melting point of niobium (2477 C) for a few seconds. The initial samples had a high hydrogen content. Polarized optics and magneto-optical studies show that the formation of large niobium hydride precipitates is suppressed already by 800 C annealing. However, the overall superconducting properties in the annealed samples did not improve after annealing, and in fact, worsened. The superconducting transition temperature decreased, the upper critical field increased, and the pinning strength increased. Parallel studies were conducted using STM, where the sample was annealed initially at 400 C, measured, annealed again at 1700 C, and measured again. These studies revealed a ``dirty'' superconducting gap with a significant spatial variation of tunneling conductance after annealing at 400 C. The clean gap was recovered after annealing at 1700 C. It is likely that these results are due to oxygen redistribution near the surface, which is always covered by oxide layers in as-grown crystals. Overall, the results indicate that vacuum annealing at least up to 1400 C, while expected to remove a large amount of hydrogen, introduces additional nanosized defects, perhaps hydride precipitates, that act as efficient pair-breaking and pinning centers.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Impurities, or dopants, that is the question
Authors:
Baptiste Gault,
Leonardo Shoji Aota,
Mathias Krämer,
Se-Ho Kim
Abstract:
The numerous stories around LK-99 as a possible room-temperature superconductor over the summer of 2023 epitomise that materials are more than a bulk crystallographic structure or an expected composition. Like all materials, those at the core of technologies for the energy generation transition, including batteries, catalysts or quantum materials draw their properties from a hierarchy of microstru…
▽ More
The numerous stories around LK-99 as a possible room-temperature superconductor over the summer of 2023 epitomise that materials are more than a bulk crystallographic structure or an expected composition. Like all materials, those at the core of technologies for the energy generation transition, including batteries, catalysts or quantum materials draw their properties from a hierarchy of microstructural features where impurities can dramatically influence the outcomes. As we move towards a circular economy, the recycling of materials will inevitably create fluxes of increasingly impure materials, generating new challenges for fabricating materials with controlled properties. Here, we provide our perspective on how high-end microscopy and microanalysis have helped us to understand relationships between synthesis, processing and microstructure, avoiding imprecise or even erroneous interpretations on the origins of the properties from a range of materials. We highlight examples of how unexpected impurities and their spatial distribution on the nanoscale can be turned into an advantage to define pathways for synthesis of materials with new and novel sets of physical properties.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Alternating Bias Assisted Annealing of Amorphous Oxide Tunnel Junctions
Authors:
David P. Pappas,
Mark Field,
Cameron Kopas,
Joel A. Howard,
Xiqiao Wang,
Ella Lachman,
Lin Zhou,
**su Oh,
Kameshwar Yadavalli,
Eyob A. Sete,
Andrew Bestwick,
Matthew J. Kramer,
Joshua Y. Mutus
Abstract:
We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongl…
▽ More
We demonstrate a transformational technique for controllably tuning the electrical properties of fabricated thermally oxidized amorphous aluminum-oxide tunnel junctions. Using conventional test equipment to apply an alternating bias to a heated tunnel barrier, giant increases in the room temperature resistance, greater than 70%, can be achieved. The rate of resistance change is shown to be strongly temperature-dependent, and is independent of junction size in the sub-micron regime. In order to measure their tunneling properties at mK temperatures, we characterized transmon qubit junctions treated with this alternating-bias assisted annealing (ABAA) technique. The measured frequencies follow the Ambegaokar-Baratoff relation between the shifted resistance and critical current. Further, these studies show a reduction of junction-contributed loss on the order of $\approx 2 \times10^{-6}$, along with a significant reduction in resonant- and off-resonant-two level system defects when compared to untreated samples. Imaging with high-resolution TEM shows that the barrier is still predominantly amorphous with a more uniform distribution of aluminum coordination across the barrier relative to untreated junctions. This new approach is expected to be widely applicable to a broad range of devices that rely on amorphous aluminum oxide, as well as the many other metal-insulator-metal structures used in modern electronics.
△ Less
Submitted 26 February, 2024; v1 submitted 14 January, 2024;
originally announced January 2024.
-
Bulk synthesis of Zn$_3$WN$_4$ via solid-state metathesis
Authors:
Christopher L. Rom,
Shaun O'Donnell,
Kayla Huang,
Ryan A. Klein,
Morgan J. Kramer,
Rebecca W. Smaha,
Andriy Zakutayev
Abstract:
Ternary nitrides are of growing technological importance, with applications as semiconductors, catalysts, and magnetic materials; however, new synthetic tools are needed to advance materials discovery efforts. Here, we show that Zn$_3$WN$_4$ can be synthesized via metathesis reactions between Li$_6$WN$_4$ and Zn$X_2$ ($X$ = Br, Cl, F). In situ synchrotron powder X-ray diffraction and differential…
▽ More
Ternary nitrides are of growing technological importance, with applications as semiconductors, catalysts, and magnetic materials; however, new synthetic tools are needed to advance materials discovery efforts. Here, we show that Zn$_3$WN$_4$ can be synthesized via metathesis reactions between Li$_6$WN$_4$ and Zn$X_2$ ($X$ = Br, Cl, F). In situ synchrotron powder X-ray diffraction and differential scanning calorimetry show that the reaction onset is correlated with the Zn$X_2$ melting point and that product purity is inversely correlated with the reaction's exothermicity. High resolution synchrotron powder X-ray diffraction measurements show that this bulk synthesis produces a structure with substantial cation ordering, as opposed to the disordered structure initially discovered via thin film sputtering. Diffuse reflectance spectroscopy reveals that Zn$_3$WN$_4$ powders exhibit two optical absorption onsets at 2.5 eV and 4.0 eV, indicating wide-bandgap semiconducting behavior and suggesting a small amount of structural disorder. We hypothesize that this synthesis strategy is generalizable because many potential Li-$M$-N precursors (where $M$ is a metal) are available for synthesizing new ternary nitride materials. This work introduces a promising synthesis strategy that will accelerate the discovery of novel functional ternary nitrides and other currently inaccessible materials.
△ Less
Submitted 5 January, 2024; v1 submitted 3 January, 2024;
originally announced January 2024.
-
Facilitating Atom Probe Tomography of 2D MXene Films by In Situ Sputtering
Authors:
Mathias Krämer,
Bar Favelukis,
Maxim Sokol,
Brian A. Rosen,
Noam Eliaz,
Se-Ho Kim,
Baptiste Gault
Abstract:
2D materials are emerging as promising nanomaterials for applications in energy storage and catalysis. In the wet chemical synthesis of MXenes, these 2D transition metal carbides and nitrides are terminated with a variety of functional groups, and cations such as Li+ are often used to intercalate into the structure to obtain exfoliated nanosheets. Given the various elements involved in their synth…
▽ More
2D materials are emerging as promising nanomaterials for applications in energy storage and catalysis. In the wet chemical synthesis of MXenes, these 2D transition metal carbides and nitrides are terminated with a variety of functional groups, and cations such as Li+ are often used to intercalate into the structure to obtain exfoliated nanosheets. Given the various elements involved in their synthesis, it is crucial to determine the detailed chemical composition of the final product, in order to better assess and understand the relationships between composition and properties of these materials. To facilitate atom probe tomography analysis of these materials, a revised specimen preparation method is presented in this study. A colloidal Ti3C2Tz MXene solution was processed into an additive-free free-standing film and specimens were prepared using a dual beam scanning electron microscope / focused ion beam. To mechanically stabilize the fragile specimens, they were coated using an in situ sputtering technique. As various 2D material inks can be processed into such free-standing films, the presented approach is pivotal for enabling atom probe analysis of other 2D materials.
△ Less
Submitted 30 November, 2023;
originally announced November 2023.
-
In-situ metallic coating of atom probe specimen for enhanced yield, performance, and increased field-of-view
Authors:
Tim M. Schwarz,
Eric Woods,
Mahander P. Singh,
Chanwon Jung,
Leonardo S. Aota,
Kyuseon Jang,
Mathias Krämer,
Se-Ho Kim,
Ingrid McCarroll,
Baptiste Gault
Abstract:
Atom probe tomography requires needle-shaped specimens with a diameter typically below 100 nm, making them both very fragile and reactive, and defects (notches at grain boundaries or precipitates) are known to affect the yield and data quality. The use of a conformal coating directly on the sharpened specimen has been proposed to increase yield and reduce background. However, to date, these coatin…
▽ More
Atom probe tomography requires needle-shaped specimens with a diameter typically below 100 nm, making them both very fragile and reactive, and defects (notches at grain boundaries or precipitates) are known to affect the yield and data quality. The use of a conformal coating directly on the sharpened specimen has been proposed to increase yield and reduce background. However, to date, these coatings have been applied ex-situ and mostly are not uniformly. Here, we report on the controlled focused ion beam in-situ deposition of a thin metal film on specimens immediately after specimen preparation. Different metallic targets e.g. Cr were attached to a micromanipulator via a conventional lift-out method and sputtered using the Ga or Xe ions. We showcase the many advantages of coating specimens from metallic to non-metallic materials. We have identified an increase in data quality and yield, an improvement of the mass resolution, as well as an increase in the effective field-of-view enabling visualization of the entire original specimen, including the complete surface oxide layer. The ease of implementation of the approach makes it very attractive for generalizing its use across a very wide range of atom probe analyses.
△ Less
Submitted 17 January, 2024; v1 submitted 14 September, 2023;
originally announced September 2023.
-
A theory of data variability in Neural Network Bayesian inference
Authors:
Javed Lindner,
David Dahmen,
Michael Krämer,
Moritz Helias
Abstract:
Bayesian inference and kernel methods are well established in machine learning. The neural network Gaussian process in particular provides a concept to investigate neural networks in the limit of infinitely wide hidden layers by using kernel and inference methods. Here we build upon this limit and provide a field-theoretic formalism which covers the generalization properties of infinitely wide net…
▽ More
Bayesian inference and kernel methods are well established in machine learning. The neural network Gaussian process in particular provides a concept to investigate neural networks in the limit of infinitely wide hidden layers by using kernel and inference methods. Here we build upon this limit and provide a field-theoretic formalism which covers the generalization properties of infinitely wide networks. We systematically compute generalization properties of linear, non-linear, and deep non-linear networks for kernel matrices with heterogeneous entries. In contrast to currently employed spectral methods we derive the generalization properties from the statistical properties of the input, elucidating the interplay of input dimensionality, size of the training data set, and variability of the data. We show that data variability leads to a non-Gaussian action reminiscent of a ($\varphi^3+\varphi^4$)-theory. Using our formalism on a synthetic task and on MNIST we obtain a homogeneous kernel matrix approximation for the learning curve as well as corrections due to data variability which allow the estimation of the generalization properties and exact results for the bounds of the learning curves in the case of infinitely many training data points.
△ Less
Submitted 9 November, 2023; v1 submitted 31 July, 2023;
originally announced July 2023.
-
Quasiparticle spectroscopy in technologically-relevant niobium using London penetration depth measurements
Authors:
Sunil Ghimire,
Kamal R. Joshi,
Amlan Datta,
Aidan Goerdt,
Makariy A. Tanatar,
Deborah Schlagel,
Matthew J. Kramer,
Jayss Marshall,
Cameron J. Copas,
Joshua Y. Mutus,
Alexander Romanenko,
Anna Grassellino,
Ruslan Prozorov
Abstract:
London penetration depth was measured in niobium foils, thin films, single crystals, and superconducting radio-frequency (SRF) cavity pieces cut out from different places. The low-temperature (T<Tc/3) variation, sensitive to the low-energy quasiparticles with states inside the superconducting gap, differs dramatically between different types of samples. With the help of phenomenological modeling,…
▽ More
London penetration depth was measured in niobium foils, thin films, single crystals, and superconducting radio-frequency (SRF) cavity pieces cut out from different places. The low-temperature (T<Tc/3) variation, sensitive to the low-energy quasiparticles with states inside the superconducting gap, differs dramatically between different types of samples. With the help of phenomenological modeling, we correlate these different behaviors with known pair-breaking mechanisms and show that such measurements may help distinguish between different pair-breaking mechanisms, such as niobium hydrides and two-level systems (TLS). The conclusions also apply to SRF cavities when tracking the temperature-dependent quality factor and the resonant frequency.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Near-Atomic Scale Perspective on the Oxidation of Ti$_3$C$_2$T$_x$ MXenes: Insights from Atom Probe Tomography
Authors:
Mathias Krämer,
Bar Favelukis,
Ayman A. El-Zoka,
Maxim Sokol,
Brian A. Rosen,
Noam Eliaz,
Se-Ho Kim,
Baptiste Gault
Abstract:
MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties and great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities…
▽ More
MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties and great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities incorporated during synthesis and processing. Here, atom probe tomography analysis of as-synthesized Ti$_3$C$_2$T$_x$ MXenes reveals the presence of alkali (Li, Na) and halogen (Cl, F) elements as well as unetched Al. Following oxidation of the colloidal solution of MXenes, it is observed that the alkalies enriched in TiO$_2$ nanowires. Although these elements are tolerated through the incorporation by wet chemical synthesis, they are often overlooked when the activity of these materials is considered, particularly during catalytic testing. This work demonstrates how the capability of atom probe tomography to image these elements in 3D at the near-atomic scale can help to better understand the activity and degradation of MXenes, in order to guide their synthesis for superior functional properties.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
Systematic Improvements in Transmon Qubit Coherence Enabled by Niobium Surface Encapsulation
Authors:
Mustafa Bal,
Akshay A. Murthy,
Shaojiang Zhu,
Francesco Crisa,
Xinyuan You,
Ziwen Huang,
Tanay Roy,
Jaeyel Lee,
David van Zanten,
Roman Pilipenko,
Ivan Nekrashevich,
Andrei Lunin,
Daniel Bafia,
Yulia Krasnikova,
Cameron J. Kopas,
Ella O. Lachman,
Duncan Miller,
Josh Y. Mutus,
Matthew J. Reagor,
Hilal Cansizoglu,
Jayss Marshall,
David P. Pappas,
Kim Vu,
Kameshwar Yadavalli,
**-Su Oh
, et al. (15 additional authors not shown)
Abstract:
We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigati…
▽ More
We present a novel transmon qubit fabrication technique that yields systematic improvements in T$_1$ relaxation times. We fabricate devices using an encapsulation strategy that involves passivating the surface of niobium and thereby preventing the formation of its lossy surface oxide. By maintaining the same superconducting metal and only varying the surface structure, this comparative investigation examining different cap** materials, such as tantalum, aluminum, titanium nitride, and gold, and film substrates across different qubit foundries definitively demonstrates the detrimental impact that niobium oxides have on the coherence times of superconducting qubits, compared to native oxides of tantalum, aluminum or titanium nitride. Our surface-encapsulated niobium qubit devices exhibit T$_1$ relaxation times 2 to 5 times longer than baseline niobium qubit devices with native niobium oxides. When cap** niobium with tantalum, we obtain median qubit lifetimes above 300 microseconds, with maximum values up to 600 microseconds, that represent the highest lifetimes to date for superconducting qubits prepared on both sapphire and silicon. Our comparative structural and chemical analysis suggests why amorphous niobium oxides may induce higher losses compared to other amorphous oxides. These results are in line with high-accuracy measurements of the niobium oxide loss tangent obtained with ultra-high Q superconducting radiofrequency (SRF) cavities. This new surface encapsulation strategy enables even further reduction of dielectric losses via passivation with ambient-stable materials, while preserving fabrication and scalable manufacturability thanks to the compatibility with silicon processes.
△ Less
Submitted 24 January, 2024; v1 submitted 25 April, 2023;
originally announced April 2023.
-
Understanding the Mechanism of the Performance Improvement in Nitrogen-doped Niobium Superconducting Radio Frequency Cavity
Authors:
Xiaotian Fang,
**-Su Oh,
Matt Kramer,
A. Romanenko,
A. Grassellino,
John Zasadzinski,
Lin Zhou
Abstract:
Niobium superconducting radiofrequency cavities enable applications in modern accelerators and quantum computers. However, the surface resistance significantly deteriorates the cavities performance. Nitrogen do** surface treatment can consistently increase cavity performance by reducing surface resistance, but the improvement mechanism is not fully understood. Herein, we employed transmission el…
▽ More
Niobium superconducting radiofrequency cavities enable applications in modern accelerators and quantum computers. However, the surface resistance significantly deteriorates the cavities performance. Nitrogen do** surface treatment can consistently increase cavity performance by reducing surface resistance, but the improvement mechanism is not fully understood. Herein, we employed transmission electron microscopy and spectroscopy to uncover the structural and chemical differences of the Nb-air interface between the non-doped and nitrogen-doped cavities. The results indicate that nitrogen do** passivates the Nb surface by introducing a compressive strain close to the Nb/air interface, which impedes the oxygen diffusion and hydrogen atoms and reduces surface oxide thickness.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Quasiparticle spectroscopy, transport, and magnetic properties of Nb films used in superconducting transmon qubits
Authors:
Kamal R. Joshi,
Sunil Ghimire,
Makariy A. Tanatar,
Amlan Datta,
**-Su Oh,
Lin Zhou,
Cameron J. Kopas,
Jayss Marshall,
Josh Y. Mutus,
Julie Slaughter,
Matthew J. Kramer,
James A. Sauls,
Ruslan Prozorov
Abstract:
Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. We study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circui…
▽ More
Niobium thin films on silicon substrate used in the fabrication of superconducting qubits have been characterized using scanning and transmission electron microscopy, electrical transport, magnetization, quasiparticle spectroscopy, and real-space real-time magneto-optical imaging. We study niobium films to provide an example of a comprehensive analytical set that may benefit superconducting circuits such as those used in quantum computers. The films show outstanding superconducting transition temperature of $T_{c}=9.35$ K and a fairly clean superconducting gap, along with superfluid density enhanced at intermediate temperatures. These observations are consistent with the recent theory of anisotropic strong-coupling superconductivity in Nb. However, the response to the magnetic field is complicated, exhibiting significantly irreversible behavior and insufficient heat conductance leading to thermo-magnetic instabilities. These may present an issue for further improvement of transmon quantum coherence. Possible mitigation strategies are discussed.
△ Less
Submitted 23 July, 2022;
originally announced July 2022.
-
Visualizing heterogeneous dipole fields by terahertz light coupling in individual nano-junctions used in transmon qubits
Authors:
R. H. J. Kim,
J. M. Park,
S. Haeuser,
C. Huang,
D. Cheng,
T. Koschny,
J. Oh,
C. Kopas,
H. Cansizoglu,
K. Yadavalli,
J. Mutus,
L. Zhou,
L. Luo,
M. Kramer,
J. Wang
Abstract:
The fundamental challenge underlying superconducting quantum computing is to characterize heterogeneity and disorder in the underlying quantum circuits. These nonuniform distributions often lead to local electric field concentration, charge scattering, dissipation and ultimately decoherence. It is particularly challenging to probe deep sub-wavelength electric field distribution under electromagnet…
▽ More
The fundamental challenge underlying superconducting quantum computing is to characterize heterogeneity and disorder in the underlying quantum circuits. These nonuniform distributions often lead to local electric field concentration, charge scattering, dissipation and ultimately decoherence. It is particularly challenging to probe deep sub-wavelength electric field distribution under electromagnetic wave coupling at individual nano-junctions and correlate them with structural imperfections from interface and boundary, ubiquitous in Josephson junctions (JJ) used in transmon qubits. A major obstacle lies in the fact that conventional microscopy tools are incapable of measuring simultaneous at nanometer and terahertz, "nano-THz" scales, which often associate with frequency-dependent charge scattering in nano-junctions. Here we directly visualize interface nano-dipole near-field distribution of individual Al/AlO$_{x}$/Al junctions used in transmon qubits. Our THz nanoscope images show a remarkable asymmetry across the junction in electromagnetic wave-junction coupling response that manifests as "hot" vs "cold" cusp spatial electrical field structures and correlates with defected boundaries from the multi-angle deposition processes in JJ fabrication inside qubit devices. The asymmetric nano-dipole electric field contrast also correlates with distinguishing, "overshoot" frequency dependence that characterizes the charge scattering and dissipation at nanoscale, hidden in responses from topographic, structural imaging and spatially-averaged techniques. The real space map** of junction dipole fields and THz charge scattering can be extended to guide qubit nano-fabrication for ultimately optimizing qubit coherence times.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Multi-modal electron microscopy study on decoherence sources and their stability in Nb based superconducting qubit
Authors:
**-Su Oh,
Xiaotian Fang,
Tae-Hoon Kim,
Matt Lynn,
Matt Kramer,
Mehdi Zarea,
James A. Sauls,
A. Romanenko,
S. Posen,
A. Grassellino,
Cameron J. Kopas,
Mark Field,
Jayss Marshall,
Hilal Cansizoglu,
Joshua Y. Mutus,
Matthew Reagor,
Lin Zhou
Abstract:
Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system defects at interfaces, such as the Nb/Si and Nb/air interface. One way to improve the Nb/air interface quality is by thermal annealing, as shown by extensive stud…
▽ More
Niobium is commonly used for superconducting quantum systems as readout resonators, capacitors, and interconnects. The coherence time of the superconducting qubits is mainly limited by microwave dissipation attributed to two-level system defects at interfaces, such as the Nb/Si and Nb/air interface. One way to improve the Nb/air interface quality is by thermal annealing, as shown by extensive studies in 3D superconducting radio frequency (SRF) cavities. However, it is unclear how the microstructure and chemistry of the interface structures change during heat treatment. To address this knowledge gap, we comprehensively characterized Nb films deposited on Si wafers by physical vapor deposition, including (1) an Nb film from a transmon and (2) an Nb film without any patterning step, using an aberration-corrected transmission electron microscope. Both Nb films exhibit columnar growth with strong [110] textures. There is a double layer between the Nb film and Si substrate, which are amorphous niobium silicides with different Nb and Si concentrations. After in-situ heating of the heterostructure at 360°C inside the microscope, the composition of the double layers at the Nb-Si interface remains almost the same despite different thickness changes. The initial amorphous niobium oxide layer on Nb surface decomposes into face-centered cubic Nb nanograins in the amorphous Nb-O matrix upon heating.
△ Less
Submitted 12 April, 2022;
originally announced April 2022.
-
Develo** a Chemical and Structural Understanding of the Surface Oxide in a Niobium Superconducting Qubit
Authors:
Akshay A. Murthy,
Paul Masih Das,
Stephanie M. Ribet,
Cameron Kopas,
Jaeyel Lee,
Matthew J. Reagor,
Lin Zhou,
Matthew J. Kramer,
Mark C. Hersam,
Mattia Checchin,
Anna Grassellino,
Roberto dos Reis,
Vinayak P. Dravid,
Alexander Romanenko
Abstract:
Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a…
▽ More
Superconducting thin films of niobium have been extensively employed in transmon qubit architectures. Although these architectures have demonstrated remarkable improvements in recent years, further improvements in performance through materials engineering will aid in large-scale deployment. Here, we use information retrieved from secondary ion mass spectrometry and electron microscopy to conduct a detailed assessment of the surface oxide that forms in ambient conditions for transmon test qubit devices patterned from a niobium film. We observe that this oxide exhibits a varying stoichiometry with NbO and NbO$_2$ found closer to the niobium film and Nb$_2$O$_5$ found closer to the surface. In terms of structural analysis, we find that the Nb$_2$O$_5$ region is semicrystalline in nature and exhibits randomly oriented grains on the order of 1-2 nm corresponding to monoclinic N-Nb$_2$O$_5$ that are dispersed throughout an amorphous matrix. Using fluctuation electron microscopy, we are able to map the relative crystallinity in the Nb$_2$O$_5$ region with nanometer spatial resolution. Through this correlative method, we observe that amorphous regions are more likely to contain oxygen vacancies and exhibit weaker bonds between the niobium and oxygen atoms. Based on these findings, we expect that oxygen vacancies likely serve as a decoherence mechanism in quantum systems.
△ Less
Submitted 28 July, 2022; v1 submitted 16 March, 2022;
originally announced March 2022.
-
Unified field theoretical approach to deep and recurrent neuronal networks
Authors:
Kai Segadlo,
Bastian Ep**,
Alexander van Meegen,
David Dahmen,
Michael Krämer,
Moritz Helias
Abstract:
Understanding capabilities and limitations of different network architectures is of fundamental importance to machine learning. Bayesian inference on Gaussian processes has proven to be a viable approach for studying recurrent and deep networks in the limit of infinite layer width, $n\to\infty$. Here we present a unified and systematic derivation of the mean-field theory for both architectures tha…
▽ More
Understanding capabilities and limitations of different network architectures is of fundamental importance to machine learning. Bayesian inference on Gaussian processes has proven to be a viable approach for studying recurrent and deep networks in the limit of infinite layer width, $n\to\infty$. Here we present a unified and systematic derivation of the mean-field theory for both architectures that starts from first principles by employing established methods from statistical physics of disordered systems. The theory elucidates that while the mean-field equations are different with regard to their temporal structure, they yet yield identical Gaussian kernels when readouts are taken at a single time point or layer, respectively. Bayesian inference applied to classification then predicts identical performance and capabilities for the two architectures. Numerically, we find that convergence towards the mean-field theory is typically slower for recurrent networks than for deep networks and the convergence speed depends non-trivially on the parameters of the weight prior as well as the depth or number of time steps, respectively. Our method exposes that Gaussian processes are but the lowest order of a systematic expansion in $1/n$ and we compute next-to-leading-order corrections which turn out to be architecture-specific. The formalism thus paves the way to investigate the fundamental differences between recurrent and deep architectures at finite widths $n$.
△ Less
Submitted 24 June, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Short- and medium-range orders in Al90Tb10 glass and their relation to the structures of competing crystalline phases
Authors:
L. Tang,
Z. J. Yang,
T. Q. Wen,
K. M. Ho,
M. J. Kramer,
C. Z. Wang
Abstract:
Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-rang…
▽ More
Molecular dynamics simulations using an interatomic potential developed by artificial neural network deep machine learning are performed to study the local structural order in Al90Tb10 metallic glass. We show that more than 80% of the Tb-centered clusters in Al90Tb10 glass have short-range order (SRO) with their 17 first coordination shell atoms stacked in a '3661' or '15551' sequence. Medium-range order (MRO) in Bergman-type packing extended out to the second and third coordination shells is also clearly observed. Analysis of the network formed by the '3661' and '15551' clusters show that ~82% of such SRO units share their faces or vertexes, while only ~6% of neighboring SRO pairs are interpenetrating. Such a network topology is consistent with the Bergman-type MRO around the Tb-centers. Moreover, crystal structure searches using genetic algorithm and the neural network interatomic potential reveal several low-energy metastable crystalline structures in the composition range close to Al90Tb10. Some of these crystalline structures have the '3661' SRO while others have the '15551' SRO. While the crystalline structures with the '3661' SRO also exhibit the MRO very similar to that observed in the glass, the ones with the '15551' SRO have very different atomic packing in the second and third shells around the Tb centers from that of the Bergman-type MRO observed in the glassy phase.
△ Less
Submitted 27 August, 2020;
originally announced August 2020.
-
Reinvestigation of the intrinsic magnetic properties of (Fe$_{1-x}$Co$_x$)$_2$B alloys and crystallization behavior of ribbons
Authors:
Tej Nath Lamichhane,
Olena Palasyuk,
Vladimir P. Antropov,
Ivan A. Zhuravlev,
Kirill D. Belashchenko,
Ikenna C. Nlebedim,
Kevin W. Dennis,
Anton Jesche,
Matthew J. Kramer,
Sergey L. Bud'ko,
R. William McCallum,
Paul C. Canfield,
Valentin Taufour
Abstract:
New determination of the magnetic anisotropy from single crystals of (Fe$_{1-x}$Co$_x$)$_2$B alloys are presented. The anomalous temperature dependence of the anisotropy constant is discussed using the standard Callen-Callen theory, which is shown to be insufficient to explain the experimental results. A more material specific study using first-principles calculations with disordered moments appro…
▽ More
New determination of the magnetic anisotropy from single crystals of (Fe$_{1-x}$Co$_x$)$_2$B alloys are presented. The anomalous temperature dependence of the anisotropy constant is discussed using the standard Callen-Callen theory, which is shown to be insufficient to explain the experimental results. A more material specific study using first-principles calculations with disordered moments approach gives a much more consistent interpretation of the experimental data. Since the intrinsic properties of the alloys with $x=0.3-0.35$ are promising for permanent magnets applications, initial investigation of the extrinsic properties are described, in particular the crystallization of melt spun ribbons with Cu, Al, and Ti additions. Previous attempts at develo** a significant hysteresis have been unsuccessful in this system. Our melt-spinning experiment indicates that this system shows rapid crystallization.
△ Less
Submitted 29 July, 2020;
originally announced July 2020.
-
Development of Interatomic Potential for Al-Tb Alloy by Deep Neural Network Learning Method
Authors:
L. Tang,
Z. J. Yang,
T. Q. Wen,
K. M. Ho,
M. J. Kramer,
C. Z. Wang
Abstract:
An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show…
▽ More
An interatomic potential for Al-Tb alloy around the composition of Al90Tb10 was developed using the deep neural network (DNN) learning method. The atomic configurations and the corresponding total potential energies and forces on each atom obtained from ab initio molecular dynamics (AIMD) simulations are collected to train a DNN model to construct the interatomic potential for Al-Tb alloy. We show the obtained DNN model can well reproduce the energies and forces calculated by AIMD. Molecular dynamics (MD) simulations using the DNN interatomic potential also accurately describe the structural properties of Al90Tb10 liquid, such as the partial pair correlation functions (PPCFs) and the bond angle distributions, in comparison with the results from AIMD. Furthermore, the developed DNN interatomic potential predicts the formation energies of crystalline phases of Al-Tb system with the accuracy comparable to ab initio calculations. The structure factor of Al90Tb10 metallic glass obtained by MD simulation using the developed DNN interatomic potential is also in good agreement with the experimental X-ray diffraction data.
△ Less
Submitted 28 March, 2020; v1 submitted 18 January, 2020;
originally announced January 2020.
-
Vacancy-mediated complex phase selection in high entropy alloys
Authors:
Prashant Singh,
Srinivasa Thimmaiah,
Bryce Thoeny,
Pratik K. Ray,
A. V. Smirnov,
Duane D. Johnson,
Matthew J. Kramer
Abstract:
Phase selection in Ti-Zr-Hf-Al high-entropy alloys was investigated by in-situ high-energy X$-$ray diffraction, single-crystal X$-$ray diffraction, and density-functional theory based electronic-structure methods that address disorder and vacancies, predicting formation enthalpy and chemical short-range order (SRO). Samples with varying Al content were synthesized, characterized, and computational…
▽ More
Phase selection in Ti-Zr-Hf-Al high-entropy alloys was investigated by in-situ high-energy X$-$ray diffraction, single-crystal X$-$ray diffraction, and density-functional theory based electronic-structure methods that address disorder and vacancies, predicting formation enthalpy and chemical short-range order (SRO). Samples with varying Al content were synthesized, characterized, and computationally assessed to ascertain the composition-dependent phase selection, as increased Al content often acts as a stabilizer of a body-centered-cubic structure. Equiatomic TiZrHfAl was especially interesting due to its observed bcc superstructure - a variant of $γ-$brass with 4 vacancies per cell (not 2 as in $γ-$brass). We highlight how vacancy ordering mediates selection of this variant of $γ-$brass, which is driven by vacancy-atom SRO that dramatically suppress all atomic SRO. As vacancies are inherent in processing refractory systems, we expect that similar discoveries await in other high entropy alloys or in revisiting older experimental data.
△ Less
Submitted 30 April, 2020; v1 submitted 23 December, 2019;
originally announced December 2019.
-
Mechanisms of skyrmion and skyrmion crystal formation from the conical phase
Authors:
Taehoon Kim,
Haijun Zhao,
Ben Xu,
Brandt A Jensen,
Alexander H King,
Matthew J Kramer,
Cewen Nan,
Liqin Ke,
Lin Zhou
Abstract:
Real-space topological magnetic structures such as skyrmions and merons are promising candidates for information storage and transport. However, the microscopic mechanisms that control their formation and evolution are still not clear. Here, using in-situ Lorentz transmission electron microscopy, we demonstrate that skyrmion crystals (SkXs) can nucleate, grow, and evolve from the conical phase in…
▽ More
Real-space topological magnetic structures such as skyrmions and merons are promising candidates for information storage and transport. However, the microscopic mechanisms that control their formation and evolution are still not clear. Here, using in-situ Lorentz transmission electron microscopy, we demonstrate that skyrmion crystals (SkXs) can nucleate, grow, and evolve from the conical phase in the same ways that real nanocrystals form from vapors or solutions. More intriguingly, individual skyrmions can also "reproduce" by division in a mitosis-like process that allows them to annihilate SkX lattice imperfections, which is not available to crystals made of mass-conserving particles. Combined string method and micromagnetic calculations show that competition between repulsive and attractive interactions between skyrmions governs particle-like SkX growth, but non-conservative SkX growth appears to be defect-mediated. Our results provide insights towards manipulating magnetic topological states by applying established crystal growth theory, adapted to account for the new process of skyrmion mitosis.
△ Less
Submitted 6 December, 2019;
originally announced December 2019.
-
Uncompensated Polarization in Incommensurate Modulations of Perovskite Antiferroelectrics
Authors:
Tao Ma,
Zhongming Fan,
Bin Xu,
Tae-Hoon Kim,
** Lu,
Laurent Bellaiche,
Matthew J. Kramer,
Xiaoli Tan,
Lin Zhou
Abstract:
Complex polar structures of incommensurate modulations (ICMs) are revealed in chemically modified PbZrO$_3$ perovskite antiferroelectrics using advanced transmission electron microscopy techniques. The Pb-cation displacements, previously assumed to arrange in a fully-compensated antiparallel fashion, are found to be either antiparallel but with different magnitudes, or in a nearly orthogonal arran…
▽ More
Complex polar structures of incommensurate modulations (ICMs) are revealed in chemically modified PbZrO$_3$ perovskite antiferroelectrics using advanced transmission electron microscopy techniques. The Pb-cation displacements, previously assumed to arrange in a fully-compensated antiparallel fashion, are found to be either antiparallel but with different magnitudes, or in a nearly orthogonal arrangement in adjacent stripes in the ICMs. Ab initio calculations corroborate the low-energy state of these arrangements. Our discovery corrects the atomic understanding of ICMs in PbZrO$_3$-based perovskite antiferroelectrics.
△ Less
Submitted 18 October, 2019; v1 submitted 5 September, 2019;
originally announced September 2019.
-
Fatigue-resistant high-performance elastocaloric materials via additive manufacturing
Authors:
Huilong Hou,
Emrah Simsek,
Tao Ma,
Nathan S. Johnson,
Suxin Qian,
Cheikh Cisse,
Drew Stasak,
Naila Al Hasan,
Lin Zhou,
Yunho Hwang,
Reinhard Radermacher,
Valery I. Levitas,
Matthew J. Kramer,
Mohsen Asle Zaeem,
Aaron P. Stebner,
Ryan T. Ott,
Jun Cui,
Ichiro Takeuchi
Abstract:
Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performan…
▽ More
Elastocaloric cooling, which exploits the latent heat released and absorbed as stress-induced phase transformations are reversibly cycled in shape memory alloys, has recently emerged as a frontrunner in non-vapor-compression cooling technologies. The intrinsically high thermodynamic efficiency of elastocaloric materials is limited only by work hysteresis. Here, we report on creating high-performance low-hysteresis elastocaloric cooling materials via additive manufacturing of Titanium-Nickel (Ti-Ni) alloys. Contrary to established knowledge of the physical metallurgy of Ti-Ni alloys, intermetallic phases are found to be beneficial to elastocaloric performances when they are combined with the binary Ti-Ni compound in nanocomposite configurations. The resulting microstructure gives rise to quasi-linear stress-strain behaviors with extremely small hysteresis, leading to enhancement in the materials efficiency by a factor of five. Furthermore, despite being composed of more than 50% intermetallic phases, the reversible, repeatable elastocaloric performance of this material is shown to be stable over one million cycles. This result opens the door for direct implementation of additive manufacturing to elastocaloric cooling systems where versatile design strategy enables both topology optimization of heat exchangers as well as unique microstructural control of metallic refrigerants.
△ Less
Submitted 21 August, 2019;
originally announced August 2019.
-
On spinodal decomposition in alnico---a transmission electron microscopy and atom probe tomography study
Authors:
Lin Zhou,
Wei Guo,
Jonathan D. Poplawsky,
Liqin Ke,
Wei Tang,
Iver E. Anderson,
Matthew J. Kramer
Abstract:
Alnico is a prime example of a finely tuned nanostructure whose magnetic properties are intimately connected to magnetic annealing (MA) during spinodal transformation and subsequent lower temperature annealing (draw) cycles. Using a combination of transmission electron microscopy and atom probe tomography, we show how these critical processing steps affect the local composition and nanostructure e…
▽ More
Alnico is a prime example of a finely tuned nanostructure whose magnetic properties are intimately connected to magnetic annealing (MA) during spinodal transformation and subsequent lower temperature annealing (draw) cycles. Using a combination of transmission electron microscopy and atom probe tomography, we show how these critical processing steps affect the local composition and nanostructure evolution with impact on magnetic properties. The nearly 2-fold increase of intrinsic coercivity ($H_\text{ci}$) during the draw cycle is not adequately explained by chemical refinement of the spinodal phases. Instead, increased Fe-Co phase ($α_1$) isolation, development of Cu-rich spheres/rods/blades and additional $α_1$ rod precipitation that occurs during the MA and draw, likely play a key role in $H_\text{ci}$ enhancement. Chemical ordering of the Al-Ni-phase ($α_2$) and formation of Ni-rich ($α_3$) may also contribute. Unraveling of the subtle effect of these nano-scaled features is crucial to understanding on how to improve shape anisotropy in alnico magnets.
△ Less
Submitted 30 October, 2018;
originally announced October 2018.
-
Single Crystal Permanent Magnet: Extraordinary Magnetic Behavior in the ta, Cu and Fe Substituted CeCo5 System
Authors:
Tej N. Lamichhane,
Michael T. Onyszczak,
Olena Palasyuk,
Saba Sharikadze,
Tae-Hoon Kim,
Matthew J. Kramer,
R. W. MacCallum,
Aleksander L. Wysocki,
Manh Cuong Nguyen,
Vladimir P. Antropov,
Tribhuvan Pandey,
David Parker,
Sergey L. Bud'ko,
Paul C. Canfield,
Andriy Palasyuk
Abstract:
To reduce material and processing costs of commercial permanent magnets and to attempt to fill the empty niche of energy products, 10 - 20 MGOe, between low-flux (ferrites, alnico) and high-flux (Nd2Fe14B- and SmCo5-type) magnets, we report synthesis, structure, magnetic properties and modeling of Ta, Cu and Fe substituted CeCo5. Using a self-flux technique, we grew single crystals of I - Ce15.1Ta…
▽ More
To reduce material and processing costs of commercial permanent magnets and to attempt to fill the empty niche of energy products, 10 - 20 MGOe, between low-flux (ferrites, alnico) and high-flux (Nd2Fe14B- and SmCo5-type) magnets, we report synthesis, structure, magnetic properties and modeling of Ta, Cu and Fe substituted CeCo5. Using a self-flux technique, we grew single crystals of I - Ce15.1Ta1.0Co74.4Cu9.5, II - Ce16.3Ta0.6Co68.9Cu14.2, III - Ce15.7Ta0.6Co67.8Cu15.9, IV - Ce16.3Ta0.3Co61.7Cu21.7 and V - Ce14.3Ta1.0Co62.0Fe12.3Cu10.4. X-ray diffraction analysis (XRD) showed that these materials retain a CaCu5 substructure and incorporate small amounts of Ta in the form of \dumb-bells", filling the 2e crystallographic sites within the 1D hexagonal channel with the 1a Ce site, whereas Co, Cu and Fe are statistically distributed among the 2c and 3g crystallographic sites. Scanning electron microscopy, energy dispersive X-ray spectroscopy (SEM-EDS) and scanning transmission electron microscopy (STEM) examinations provided strong evidence of the single-phase nature of the as-grown crystals, even though they readily exhibited significant magnetic coercivitie of ~1.6 - ~1.8 kOe caused by Co-enriched, nano-sized, structural defects and faults that can serve as pinning sites. Formation of the "composite crystal" during the heat treatment creates a 3D array of extended defects within a primarily single grain single crystal, which greatly improves its magnetic characteristics. Possible causes of the formation of the "composite crystal" may be associated with Ta atoms leaving matrix interstices at lower temperatures and/or matrix degradation induced by decreased miscibility at lower temperatures. Fe strongly improves both the Curie temperature and magnetization of the system resulting in (BH)max:~13 MGOe at room temperature.
△ Less
Submitted 16 May, 2018;
originally announced May 2018.
-
Magnetic properties of single crystalline itinerant ferromagnet AlFe2B2
Authors:
Tej N. Lamichhane,
Li Xiang,
Qisheng Lin,
Tribhuwan Pandey,
David S. Parker,
Tae-Hoon Kim,
Lin Zhou,
Matthew J. Kramer,
Sergey L. Bud'ko,
Paul C. Canfield
Abstract:
Single crystals of AlFe$_{2}$B$_{2}$ have been grown using the self flux growth method and then measured the structural properties, temperature and field dependent magnetization, and temperature dependent electrical resistivity at ambient as well as high pressure. The Curie temperature of AlFe$_{2}$B$_{2}$ is determined to be $274$~K. The measured saturation magnetization and the effective moment…
▽ More
Single crystals of AlFe$_{2}$B$_{2}$ have been grown using the self flux growth method and then measured the structural properties, temperature and field dependent magnetization, and temperature dependent electrical resistivity at ambient as well as high pressure. The Curie temperature of AlFe$_{2}$B$_{2}$ is determined to be $274$~K. The measured saturation magnetization and the effective moment for paramagnetic Fe-ion indicate the itinerant nature of the magnetism with a Rhode-Wohlfarth ratio $ \frac{M_{C}}{M_{sat}}\approx 1.14$. Temperature dependent resistivity measurements under hydrostatic pressure shows that transition temperature \textit{T$_C$} is suppressed down to 255 K for $p = 2.24$~GPa pressure with a suppression rate of $\sim -8.9$~K/GPa. The anisotropy fields and magnetocrystalline anisotropy constants are in reasonable agreement with density functional theory calculations.
△ Less
Submitted 16 May, 2018;
originally announced May 2018.
-
Spatially-correlated Site Occupancy in the Nonstoichiometric Meta-stable ε-Al60Sm11 Phase during Devitrification of Al-10.2 at.% Sm Glasses
Authors:
Lin Yang,
Feng Zhang,
Fan-Qiang Meng,
Lin Zhou,
Yang Sun,
Xin Zhao,
Zhuo Ye,
Matthew J. Kramer,
Cai-Zhuang Wang,
Kai-Ming Ho
Abstract:
A metastable ε-Al60Sm11 phase appears during the initial devitrification of as-quenched Al-10.2 at.% Sm glasses. The ε phase is nonstoichiometric in nature since Al occupation is observed on the 16f Sm lattice sites. Scanning transmission electron microscopic images reveal profound spatial correlation of Sm content on these sites, which cannot be explained by the "average crystal" description from…
▽ More
A metastable ε-Al60Sm11 phase appears during the initial devitrification of as-quenched Al-10.2 at.% Sm glasses. The ε phase is nonstoichiometric in nature since Al occupation is observed on the 16f Sm lattice sites. Scanning transmission electron microscopic images reveal profound spatial correlation of Sm content on these sites, which cannot be explained by the "average crystal" description from Rietveld analysis of diffraction data. Thermodynamically favorable configurations, established by Monte Carlo (MC) simulations based on a cluster-expansion model, also give qualitatively different correlation functions from experimental observations. On the other hand, molecular dynamics simulations of the growth of ε-Al60Sm11 in undercooled liquid show that when the diffusion range of Sm is limited to ~ 4 Å, the correlation function of the as-grown crystal structure agrees well with that of the STEM images. Our results show that kinetic effects, especially the limited diffusivity of Sm atoms plays the fundamental role in determining the nonstoichiometric site occupancies of the ε-Al60Sm11 phase during the crystallization process.
△ Less
Submitted 28 February, 2018;
originally announced February 2018.
-
Observation of Al41Sm5: new evidence for structural hierarchy in Al-Sm alloys
Authors:
Z. Ye,
F. Meng,
F. Zhang,
Y. Sun,
L. Yang,
S. H. Zhou,
R. E. Napolitano,
M. I. Mendelev,
R. T. Ott,
M. J. Kramer,
C. Z. Wang,
K. M. Ho
Abstract:
Using an effective genetic algorithm, we uncover the structure of a metastable Al41Sm5 phase that supplements its family sharing similar short-range orders. The phase evolves upon heating an amorphous Al-9.7at.%Sm ribbon, produced by melt-spinning. The dynamical phase selection is discussed with respect to the structural connections between the short-range packing motifs in the amorphous precursor…
▽ More
Using an effective genetic algorithm, we uncover the structure of a metastable Al41Sm5 phase that supplements its family sharing similar short-range orders. The phase evolves upon heating an amorphous Al-9.7at.%Sm ribbon, produced by melt-spinning. The dynamical phase selection is discussed with respect to the structural connections between the short-range packing motifs in the amorphous precursor and those observed in the selected phases. The phase elucidated here is one of several newly discovered large-unit-cell phases found to form during devitrification from the glass in this binary system, further illustrating the power and efficiency of our approach, the important role of structural hierarchy in phase selection, and the richness of the metastable phase landscape accessible from the glassy structure.
△ Less
Submitted 27 December, 2017;
originally announced December 2017.
-
Simulation of alnico coercivity
Authors:
Liqin Ke,
Ralph Skomski,
Todd D. Hoffmann,
Lin Zhou,
Wei Tang,
Duane D. Johnson,
Matthew J. Kramer,
Iver E. Anderson,
C. -Z. Wang
Abstract:
Micromagnetic simulations of alnico show substantial deviations from Stoner-Wohlfarth behavior due to the unique size and spatial distribution of the rod-like Fe-Co phase formed during spinodal decomposition in an external magnetic field. The maximum coercivity is limited by single-rod effects, especially deviations from ellipsoidal shape, and by interactions between the rods. Both the exchange in…
▽ More
Micromagnetic simulations of alnico show substantial deviations from Stoner-Wohlfarth behavior due to the unique size and spatial distribution of the rod-like Fe-Co phase formed during spinodal decomposition in an external magnetic field. The maximum coercivity is limited by single-rod effects, especially deviations from ellipsoidal shape, and by interactions between the rods. Both the exchange interaction between connected rods and magnetostatic interaction between rods are considered, and the results of our calculations show good agreement with recent experiments. Unlike systems dominated by magnetocrystalline anisotropy, coercivity in alnico is highly dependent on size, shape, and geometric distribution of the Fe-Co phase, all factors that can be tuned with appropriate chemistry and thermal-magnetic annealing.
△ Less
Submitted 13 July, 2017;
originally announced July 2017.
-
Microstructural and magnetic property evolution with different heat-treatment conditions in an alnico alloy
Authors:
Lin Zhou,
Wei Tang,
Liqin Ke,
Jonathan D. Poplawsky,
Iver E. Anderson,
Matthew J. Kramer
Abstract:
Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally decomposed nanostructure that forms during heat-treatment. Using a combination of transmission electron microscopy and atom probe tomography techniques, this study…
▽ More
Further property enhancement of alnico, an attractive near-term, non-rare-earth permanent magnet alloy system, primarily composed of Al, Ni, Co, and Fe, relies on improved morphology control and size refinement of its complex spinodally decomposed nanostructure that forms during heat-treatment. Using a combination of transmission electron microscopy and atom probe tomography techniques, this study evaluates the magnetic properties and microstructures of an isotropic 32.4Fe-38.1Co-12.9Ni-7.3Al-6.4Ti-3.0Cu (wt.$\%$) alloy in terms of processing parameters such as annealing temperature, annealing time, application of an external magnetic field, as well as low-temperature "draw" annealing. Optimal spinodal morphology and spacing is formed within a narrow temperature and time range ($\sim 840 \unicode{x2103}$ and 10 min during thermal-magnetic annealing (MA). The ideal morphology is a mosaic structure consisting of periodically arrayed $\sim 40$ nm diameter (Fe-Co)-rich rods ($α_1$ phase) embedded in an (Al-Ni)-rich ($α_2$ phase) matrix. A Cu-enriched phase with a size of $\sim$ 3-5 nm is located at the corners of two adjacent $\{110\}$ facets of the $α_1$ phase. The MA process significantly increased remanence ($B_\text{r}$) ($\sim$ 40-70 $\%$) of the alloy due to biased elongation of the $α_1$ phase along the $\langle100\rangle$ crystallographic direction, which is closest in orientation to the applied magnetic field. The optimum magnetic properties of the alloy with an intrinsic coercivity ($H_\text{cj}$) of 1845 Oe and a maximum energy product ($BH_\text{max}$) of 5.9 MGOe were attributed to the uniformity of the mosaic structure.
△ Less
Submitted 13 July, 2017;
originally announced July 2017.
-
Electronic structure and magnetic properties in $T_2\text{AlB}_2$ ($T$ = Fe, Mn, Cr, Co, and Ni) and their alloys
Authors:
Liqin Ke,
Bruce N. Harmon,
Matthew J. Kramer
Abstract:
The electronic structure and intrinsic magnetic properties of $\text{Fe}_2\text{AlB}_2$-related compounds and their alloys have been investigated using density functional theory. For $\text{Fe}_2\text{AlB}_2$, the crystallographic $a$ axis is the easiest axis, which agrees with experiments. The magnetic ground state of $\text{Mn}_2\text{AlB}_2$ is found to be ferromagnetic in the basal $ab$ plane,…
▽ More
The electronic structure and intrinsic magnetic properties of $\text{Fe}_2\text{AlB}_2$-related compounds and their alloys have been investigated using density functional theory. For $\text{Fe}_2\text{AlB}_2$, the crystallographic $a$ axis is the easiest axis, which agrees with experiments. The magnetic ground state of $\text{Mn}_2\text{AlB}_2$ is found to be ferromagnetic in the basal $ab$ plane, but antiferromagnetic along the $c$ axis. All $3d$ do**s considered decrease the magnetization and Curie temperature in $\text{Fe}_2\text{AlB}_2$. Electron do** with Co or Ni has a stronger effect on the decreasing of Curie temperature in $\text{Fe}_2\text{AlB}_2$ than hole do** with Mn or Cr. However, a larger amount of Mn do** on $\text{Fe}_2\text{AlB}_2$ promotes the ferromagnetic to antiferromagnetic transition. A very anisotropic magnetoelastic effect is found in $\text{Fe}_2\text{AlB}_2$: the magnetization has a much stronger dependence on the lattice parameter $c$ than on $a$ or $b$, which is explained by electronic-structure features near the Fermi level. Do**s of other elements on B and Al sites are also discussed.
△ Less
Submitted 14 March, 2017;
originally announced March 2017.
-
Highly responsive ground state of PbTaSe$_2$: structural phase transition and evolution of superconductivity under pressure
Authors:
Udhara Kaluarachchi,
Yuhang Deng,
Matthew F. Besser,
Kewei Sun,
Lin Zhou,
Manh Cuong Nguyen,
Zhujun Yuan,
Chenglong Zhang,
James S. Schilling,
Matthew J. Kramer,
Shuang Jia,
Cai-Zhuang Wang,
Kai-Ming Ho,
Paul C. Canfield,
Sergey L. Bud'ko
Abstract:
Transport and magnetic studies of PbTaSe$_2$ under pressure suggest existence of two superconducting phases with the low temperature phase boundary at $\sim 0.25$ GPa that is defined by a very sharp, first order, phase transition. The first order phase transition line can be followed via pressure dependent resistivity measurements, and is found to be near 0.12 GPa near room temperature. Transmissi…
▽ More
Transport and magnetic studies of PbTaSe$_2$ under pressure suggest existence of two superconducting phases with the low temperature phase boundary at $\sim 0.25$ GPa that is defined by a very sharp, first order, phase transition. The first order phase transition line can be followed via pressure dependent resistivity measurements, and is found to be near 0.12 GPa near room temperature. Transmission electron microscopy and x-ray diffraction at elevated temperatures confirm that this first order phase transition is structural and occurs at ambient pressure near $\sim 425$ K. The new, high temperature / high pressure phase has a similar crystal structure and slightly lower unit cell volume relative to the ambient pressure, room temperature structure. Based on first-principles calculations this structure is suggested to be obtained by shifting the Pb atoms from the $1a$ to $1e$ Wyckoff position without changing the positions of Ta and Se atoms. PbTaSe$_2$ has an exceptionally pressure sensitive, structural phase transition with $ΔT_s/ΔP \approx - 1700$ K/GPa near 4 K, this first order transition causes an $\sim 1$ K ($\sim 25 \%$) step - like decrease in $T_c$ as pressure is increased through 0.25 GPa.
△ Less
Submitted 1 February, 2017;
originally announced February 2017.
-
Structural and ferromagnetic properties of an orthorhombic phase of MnBi stabilized with Rh additions
Authors:
Valentin Taufour,
Srinivasa Thimmaiah,
Stephen March,
Scott Saunders,
Kewei Sun,
Tej Nath Lamichhane,
Matthew J. Kramer,
Sergey L. Budko,
Paul C. Canfield
Abstract:
The article addresses the possibility of alloy elements in MnBi which may modify the thermodynamic stability of the NiAs-type structure without significantly degrading the magnetic properties. The addition of small amounts of Rh and Mn provides an improvement in the thermal stability with some degradation of the magnetic properties. The small amounts of Rh and Mn additions in MnBi stabilize an ort…
▽ More
The article addresses the possibility of alloy elements in MnBi which may modify the thermodynamic stability of the NiAs-type structure without significantly degrading the magnetic properties. The addition of small amounts of Rh and Mn provides an improvement in the thermal stability with some degradation of the magnetic properties. The small amounts of Rh and Mn additions in MnBi stabilize an orthorhombic phase whose structural and magnetic properties are closely related to the ones of the previously reported high-temperature phase of MnBi (HT~MnBi). To date, the properties of the HT~MnBi, which is stable between $613$ and $719$~K, have not been studied in detail because of its transformation to the stable low-temperature MnBi (LT~MnBi), making measurements near and below its Curie temperature difficult. The Rh-stabilized MnBi with chemical formula Mn$_{1.0625-x}$Rh$_{x}$Bi [$x=0.02(1)$] adopts a new superstructure of the NiAs/Ni$_2$In structure family. It is ferromagnetic below a Curie temperature of $416$~K. The critical exponents of the ferromagnetic transition are not of the mean-field type but are closer to those associated with the Ising model in three dimensions. The magnetic anisotropy is uniaxial; the anisotropy energy is rather large, and it does not increase when raising the temperature, contrary to what happens in LT~MnBi. The saturation magnetization is approximately $3$~$μ_B$/f.u. at low temperatures. While this exact composition may not be application ready, it does show that alloying is a viable route to modifying the stability of this class of rare-earth-free magnet alloys.
△ Less
Submitted 3 August, 2015;
originally announced August 2015.
-
Unconventional phase selection in high-driven systems: A complex metastable structure prevails over simple stable phases
Authors:
Zhuo Ye,
Feng Zhang,
Yang Sun,
Manh Cuong Nguyen,
Mikhail I. Mendelev,
Ryan T. Ott,
Eun Soo Park,
Matthew Besser,
Matthew J. Kramer,
Ze-Jun Ding,
Cai-Zhuang Wang,
Kai-Ming Ho
Abstract:
Phase selection in deeply undercooled liquids and devitrified glasses during heating involves complex interplay between the barriers to nucleation and the ability for these nuclei to grow. During the devitrification of glassy alloys, complicated metastable structures often precipitate instead of simpler, more stable compounds. Here, we access this unconventional type of phase selections by investi…
▽ More
Phase selection in deeply undercooled liquids and devitrified glasses during heating involves complex interplay between the barriers to nucleation and the ability for these nuclei to grow. During the devitrification of glassy alloys, complicated metastable structures often precipitate instead of simpler, more stable compounds. Here, we access this unconventional type of phase selections by investigating an Al-10%Sm system, where a complicated cubic structure first precipitates with a large lattice parameter of 1.4 nm. We not only solve the structure of this "big cubic" phase containing ~140 atoms but establish an explicit interconnection between the structural orderings of the amorphous alloy and the cubic phase, which provides a low-barrier nucleation pathway at low temperatures. The surprising rapid growth of the crystal is attributed to its high tolerance to point defects, which minimize the short-scale atomic rearrangements to form the crystal. Our study suggests a new scenario of devitrification, where phase transformation proceeds initially without partitioning through a complex intermediate crystal phase.
△ Less
Submitted 30 January, 2015;
originally announced February 2015.
-
Crystalline 'Genes' in Metallic Liquids
Authors:
Yang Sun,
Feng Zhang,
Zhuo Ye,
Xiaowei Fang,
Zejun Ding,
Cai-Zhuang Wang,
Mikhail I. Mendelev,
Ryan T. Ott,
M. J. Kramer,
Kai-Ming Ho
Abstract:
The underlying structural order that transcends the liquid, glass and crystalline states is identified using an efficient genetic algorithm (GA). GA identifies the most common energetically favorable packing motif in crystalline structures close to the alloy's Al-10 at.% Sm composition. These motifs are in turn compared to the observed packing motifs in the actual liquid structures using a cluster…
▽ More
The underlying structural order that transcends the liquid, glass and crystalline states is identified using an efficient genetic algorithm (GA). GA identifies the most common energetically favorable packing motif in crystalline structures close to the alloy's Al-10 at.% Sm composition. These motifs are in turn compared to the observed packing motifs in the actual liquid structures using a cluster-alignment method which reveals the average topology. Conventional descriptions of the short-range order, such as Voronoi tessellation, are too rigid in their analysis of the configurational poly-types when describing the chemical and topological ordering during transition from undercooled metallic liquids to crystalline phases or glass. Our approach here brings new insight into describing mesoscopic order-disorder transitions in condensed matter physics.
△ Less
Submitted 7 August, 2014;
originally announced August 2014.
-
Stripe-like nanoscale structural phase separation and optimal inhomogeneity in superconducting BaPb$_{1-x}$Bi$_x$O$_3$
Authors:
P. Giraldo-Gallo,
Y. Zhang,
C. Parra,
H. C. Manoharan,
M. R. Beasley,
T. H. Geballe,
M. J. Kramer,
I. R. Fisher
Abstract:
Structural phase separation in the form of partially disordered stripes, with characteristic length scales in the nanometer range, is observed for superconducting BaPb$_{1-x}$Bi$_x$O$_3$. The evolution of the superconducting coherence length with composition relative to the size of these stripes suggests an important role of the nanostructure in determining the shape of the superconducting dome. I…
▽ More
Structural phase separation in the form of partially disordered stripes, with characteristic length scales in the nanometer range, is observed for superconducting BaPb$_{1-x}$Bi$_x$O$_3$. The evolution of the superconducting coherence length with composition relative to the size of these stripes suggests an important role of the nanostructure in determining the shape of the superconducting dome. It is proposed that the maximum $T_c$ is determined by a kind of "optimal inhomogeneity", characterized by a crossover from an inhomogeneous macroscopic superconductor to a granular superconductor for which phase fluctuations suppress $T_c$.
△ Less
Submitted 28 July, 2014;
originally announced July 2014.
-
A Massive Pulsar in a Compact Relativistic Binary
Authors:
John Antoniadis,
Paulo C. C. Freire,
Norbert Wex,
Thomas M. Tauris,
Ryan S. Lynch,
Marten H. van Kerkwijk,
Michael Kramer,
Cees Bassa,
Vik S. Dhillon,
Thomas Driebe,
Jason W. T. Hessels,
Victoria M. Kaspi,
Vladislav I. Kondratiev,
Norbert Langer,
Thomas R. Marsh,
Maura A. McLaughlin,
Timothy T. Pennucci,
Scott M. Ransom,
Ingrid H. Stairs,
Joeri van Leeuwen,
Joris P. W. Verbiest,
David G. Whelan
Abstract:
Many physically motivated extensions to general relativity (GR) predict significant deviations in the properties of spacetime surrounding massive neutron stars. We report the measurement of a 2.01 +/- 0.04 solar mass pulsar in a 2.46-hr orbit with a 0.172 +/- 0.003 solar mass white dwarf. The high pulsar mass and the compact orbit make this system a sensitive laboratory of a previously untested st…
▽ More
Many physically motivated extensions to general relativity (GR) predict significant deviations in the properties of spacetime surrounding massive neutron stars. We report the measurement of a 2.01 +/- 0.04 solar mass pulsar in a 2.46-hr orbit with a 0.172 +/- 0.003 solar mass white dwarf. The high pulsar mass and the compact orbit make this system a sensitive laboratory of a previously untested strong-field gravity regime. Thus far, the observed orbital decay agrees with GR, supporting its validity even for the extreme conditions present in the system. The resulting constraints on deviations support the use of GR-based templates for ground-based gravitational wave detectors. Additionally, the system strengthens recent constraints on the properties of dense matter and provides insight to binary stellar astrophysics and pulsar recycling.
△ Less
Submitted 25 April, 2013;
originally announced April 2013.
-
Field-Tuned Superconductor-Insulator Transition in BaPb1-xBixO3
Authors:
P. Giraldo-Gallo,
H. Lee,
Y. Zhang,
M. J. Kramer,
M. R. Beasley,
T. H. Geballe,
I. R. Fisher
Abstract:
BaPb$_{1-x}$Bi$_x$O$_3$ is found to exhibit a field-tuned superconductor to insulator transition for Bi compositions 0.24 $\leq x \leq$ 0.29. The magnetoresistance of optimally doped samples manifests a temperature-independent crossing point and scaling of the form $ρ(T,H)=ρ_c F(|H-H_{c}|T^{-1/zν})$, where $H_c$ is the field determined by the temperature-independent crossing point, and $zν$ = 0.69…
▽ More
BaPb$_{1-x}$Bi$_x$O$_3$ is found to exhibit a field-tuned superconductor to insulator transition for Bi compositions 0.24 $\leq x \leq$ 0.29. The magnetoresistance of optimally doped samples manifests a temperature-independent crossing point and scaling of the form $ρ(T,H)=ρ_c F(|H-H_{c}|T^{-1/zν})$, where $H_c$ is the field determined by the temperature-independent crossing point, and $zν$ = 0.69 $\pm$ 0.03. High resolution transmission electron microscopy measurements reveal a complex intergrown nanostructure comprising tetragonal and orthorhombic polymorphs. Data are analyzed in terms of both a classical effective medium theory and a field-tuned quantum phase transition, neither of which provides a completely satisfactory explanation for this remarkable phenomenology.
△ Less
Submitted 8 May, 2012; v1 submitted 12 December, 2011;
originally announced December 2011.
-
Stabilization of an ambient pressure, collapsed tetragonal phase in CaFe2As2 and tuning of the orthorhombic / antiferromagnetic transition temperature by over 70 K by control of nano-precipitates
Authors:
S. Ran,
S. L. Bud'ko,
D. K. Pratt,
A. Kreyssig,
M. G. Kim,
M. J. Kramer,
D. H. Ryan,
W. N. Rowan-Weetaluktuk,
Y. Furukawa,
B. Roy,
A. I. Goldman,
P. C. Canfield
Abstract:
We have found a remarkably large response of the transition temperature of CaFe2As2 single crystals grown out of excess FeAs to annealing / quenching temperature. Whereas crystals that are annealed at 400 C exhibit a first order phase transition from a high temperature tetragonal to a low temperature orthorhombic and antiferromagnetic state near 170 K, crystals that have been quenched from 960 C e…
▽ More
We have found a remarkably large response of the transition temperature of CaFe2As2 single crystals grown out of excess FeAs to annealing / quenching temperature. Whereas crystals that are annealed at 400 C exhibit a first order phase transition from a high temperature tetragonal to a low temperature orthorhombic and antiferromagnetic state near 170 K, crystals that have been quenched from 960 C exhibit a transition from a high temperature tetragonal phase to a low temperature, non-magnetic, collapsed tetragonal phase below 100 K. By use of temperature dependent electrical resistivity, magnetic susceptibility, X-ray diffraction, Mossbauer spectroscopy and nuclear magnetic resonance measurements we have been able to demonstrate that the transition temperature can be reduced in a monotonic fashion by varying the annealing / quenching temperature from 400 to 850 C with the low temperature state remaining antiferromagnetic for transition temperatures larger than 100 K and becoming collapsed tetragonal / non-magnetic for transition temperatures below 90 K. This suppression of the orthorhombic / antiferromagnetic phase transition and its ultimate replacement with the collapsed tetragonal / non-magnetic phase is similar to what has been observed for CaFe2As2 under hydrostatic pressure. Transmission electron microscopy studies indicate that there is a temperature dependent, width of formation of CaFe2As2 with a decreasing amount of excess Fe and As being soluble in the single crystal at lower annealing temperatures. For samples quenched from 960 C there is a fine (of order 10 nm), semi-uniform distribution of precipitate that can be associated with an average strain field whereas for samples annealed at 400 C the excess Fe and As form mesoscopic grains that induce little strain throughout the CaFe2As2 lattice.
△ Less
Submitted 24 January, 2011;
originally announced January 2011.
-
Anomalous scattering in superconducting indium-doped tin telluride
Authors:
A. S. Erickson,
T. H. Geballe,
I. R. Fisher,
Y. Q. Wu,
M. J. Kramer
Abstract:
Results of resistivity, Hall effect, magnetoresistance, susceptibility and heat capacity measurements are presented for single crystals of indium-doped tin telluride with compositions Sn$_{.988-x}$In$_x$Te where $0 \leq x \leq 8.4 %$, along with microstructural analysis based on transmission electron microscopy. For small indium concentrations, $x \leq 0.9 %$ the material does not superconduct abo…
▽ More
Results of resistivity, Hall effect, magnetoresistance, susceptibility and heat capacity measurements are presented for single crystals of indium-doped tin telluride with compositions Sn$_{.988-x}$In$_x$Te where $0 \leq x \leq 8.4 %$, along with microstructural analysis based on transmission electron microscopy. For small indium concentrations, $x \leq 0.9 %$ the material does not superconduct above 0.3 K, and the transport properties are consistent with simple metallic behavior. For $x \geq 2.7 %$ the material exhibits anomalous low temperature scattering and for $x \geq 6.1 %$ bulk superconductivity is observed with critical temperatures close to 2 K. Intermediate indium concentrations $2.7% \leq x \leq 3.8%$ do not exhibit bulk superconductivity above 0.7 K. Susceptibility data indicate the absence of magnetic impurities, while magnetoresistance data are inconsistent with localization effects, leading to the conclusion that indium-doped SnTe is a candidate charge Kondo system, similar to thallium-doped PbTe.
△ Less
Submitted 1 September, 2010;
originally announced September 2010.
-
Multiple charge density wave transitions in Gd$_2$Te$_5$
Authors:
K. Y. Shin,
N. Ru,
C. L. Condron,
Y. Q. Wu,
M. J. Kramer,
M. F. Toney,
I. R. Fisher
Abstract:
Diffraction measurements performed via transmission electron microscopy and high resolution X-ray scattering reveal two distinct charge density wave transitions in Gd$_2$Te$_5$ at $T_{c1}$ = 410(3) and $T_{c2}$ = 532(3) K, associated with the \textit{on}-axis incommensurate lattice modulation and \textit{off}-axis commensurate lattice modulation respectively. Analysis of the temperature dependen…
▽ More
Diffraction measurements performed via transmission electron microscopy and high resolution X-ray scattering reveal two distinct charge density wave transitions in Gd$_2$Te$_5$ at $T_{c1}$ = 410(3) and $T_{c2}$ = 532(3) K, associated with the \textit{on}-axis incommensurate lattice modulation and \textit{off}-axis commensurate lattice modulation respectively. Analysis of the temperature dependence of the order parameters indicates a non-vanishing coupling between these two distinct CDW states.
△ Less
Submitted 15 August, 2008;
originally announced August 2008.
-
Charge density wave formation in $R_{2}$Te$_{5}$ ($R$=Nd, Sm and Gd)
Authors:
K. Y. Shin,
J. Laverock,
Y. Q. Wu,
C. L. Condron,
M. F. Toney,
S. B. Dugdale,
M. J. Kramer,
I. R. Fisher
Abstract:
The rare earth ($R$) tellurides $R_2$Te$_5$ have a crystal structure intermediate between that of $R$Te$_2$ and $R$Te$_3$, consisting of alternating single and double Te planes sandwiched between $R$Te block layers. We have successfully grown single crystals of Nd$_2$Te$_5$, Sm$_2$Te$_5$ and Gd$_2$Te$_5$ from a self flux, and describe here the first evidence for charge density wave formation in…
▽ More
The rare earth ($R$) tellurides $R_2$Te$_5$ have a crystal structure intermediate between that of $R$Te$_2$ and $R$Te$_3$, consisting of alternating single and double Te planes sandwiched between $R$Te block layers. We have successfully grown single crystals of Nd$_2$Te$_5$, Sm$_2$Te$_5$ and Gd$_2$Te$_5$ from a self flux, and describe here the first evidence for charge density wave formation in these materials. The superlattice patterns for all three compounds are relatively complex, consisting at room temperature of at least two independent wavevectors. Consideration of the electronic structure indicates that to a large extent these wave vectors are separately associated with sheets of the Fermi surface which are principally derived from the single and double Te layers.
△ Less
Submitted 12 December, 2007;
originally announced December 2007.
-
Quasi-angular momentum of Bose and Fermi gases in rotating optical lattices
Authors:
Brandon M. Peden,
Rajiv Bhat,
Meret Krämer,
Murray J. Holland
Abstract:
The notion of quasi-angular momentum is introduced to label the eigenstates of a Hamiltonian with a discrete rotational symmetry. This concept is recast in an operatorial form where the creation and annihilation operators of a Hubbard Hamiltonian carry units of quasi-angular momentum. Using this formalism, the ground states of ultracold gases of non-interacting fermions in rotating optical latti…
▽ More
The notion of quasi-angular momentum is introduced to label the eigenstates of a Hamiltonian with a discrete rotational symmetry. This concept is recast in an operatorial form where the creation and annihilation operators of a Hubbard Hamiltonian carry units of quasi-angular momentum. Using this formalism, the ground states of ultracold gases of non-interacting fermions in rotating optical lattices are studied as a function of rotation, and transitions between states of different quasi-angular momentum are identified. In addition, previous results for strongly-interacting bosons are re-examined and compared to the results for non-interacting fermions. Quasi-angular momentum can be used to distinguish between these two cases. Finally, an experimentally accessible signature of quasi-angular momentum is identified in the momentum distributions of single-particle eigenstates.
△ Less
Submitted 18 October, 2007; v1 submitted 2 July, 2007;
originally announced July 2007.
-
Hall effects in Bose-Einstein condensates in a rotating optical lattice
Authors:
Rajiv Bhat,
M. Kraemer,
J. Cooper,
M. J. Holland
Abstract:
Using the Kubo formalism, we demonstrate fractional quantum Hall features in a rotating Bose-Einstein condensate in a co-rotating two-dimensional optical lattice. The co-rotating lattice and trap potential allow for an effective magnetic field and compensation of the centrifugal potential. Fractional quantum Hall features are seen for the single-particle system and for few strongly interacting m…
▽ More
Using the Kubo formalism, we demonstrate fractional quantum Hall features in a rotating Bose-Einstein condensate in a co-rotating two-dimensional optical lattice. The co-rotating lattice and trap potential allow for an effective magnetic field and compensation of the centrifugal potential. Fractional quantum Hall features are seen for the single-particle system and for few strongly interacting many-particle systems.
△ Less
Submitted 23 May, 2007;
originally announced May 2007.
-
Quantized Vortex States of Strongly Interacting Bosons in a Rotating Optical Lattice
Authors:
Rajiv Bhat,
B. M. Peden,
B. T. Seaman,
M. Kramer,
L. D. Carr,
M. J. Holland
Abstract:
Bose gases in rotating optical lattices combine two important topics in quantum physics: superfluid rotation and strong correlations. In this paper, we examine square two-dimensional systems at zero temperature comprised of strongly repulsive bosons with filling factors of less than one atom per lattice site. The entry of vortices into the system is characterized by jumps of 2 pi in the phase wi…
▽ More
Bose gases in rotating optical lattices combine two important topics in quantum physics: superfluid rotation and strong correlations. In this paper, we examine square two-dimensional systems at zero temperature comprised of strongly repulsive bosons with filling factors of less than one atom per lattice site. The entry of vortices into the system is characterized by jumps of 2 pi in the phase winding of the condensate wavefunction. A lattice of size L X L can have at most L-1 quantized vortices in the lowest Bloch band. In contrast to homogeneous systems, angular momentum is not a good quantum number since the continuous rotational symmetry is broken by the lattice. Instead, a quasi-angular momentum captures the discrete rotational symmetry of the system. Energy level crossings indicative of quantum phase transitions are observed when the quasi-angular momentum of the ground-state changes.
△ Less
Submitted 28 July, 2006;
originally announced July 2006.
-
Atomtronics: ultracold atom analogs of electronic devices
Authors:
B. T. Seaman,
M. Kraemer,
D. Z. Anderson,
M. J. Holland
Abstract:
Atomtronics focuses on atom analogs of electronic materials, devices and circuits. A strongly interacting ultracold Bose gas in a lattice potential is analogous to electrons in solid-state crystalline media. As a consequence of the band structure, cold atoms in a lattice can exhibit insulator or conductor properties. P-type and N-type material analogs can be created by introducing impurity sites…
▽ More
Atomtronics focuses on atom analogs of electronic materials, devices and circuits. A strongly interacting ultracold Bose gas in a lattice potential is analogous to electrons in solid-state crystalline media. As a consequence of the band structure, cold atoms in a lattice can exhibit insulator or conductor properties. P-type and N-type material analogs can be created by introducing impurity sites into the lattice. Current through an atomtronic wire is generated by connecting the wire to an atomtronic battery which maintains the two contacts at different chemical potentials. The design of an atomtronic diode with a strongly asymmetric current-voltage curve exploits the existence of superfluid and insulating regimes in the phase diagram. The atomtronic analog of a bipolar junction transistor exhibits large negative gain. Our results provide the building blocks for more advanced atomtronic devices and circuits such as amplifiers, oscillators and fundamental logic gates.
△ Less
Submitted 23 June, 2006;
originally announced June 2006.
-
Stability diagram and growth rate of parametric resonances in Bose-Einstein condensates in one-dimensional optical lattices
Authors:
C. Tozzo,
M. Kraemer,
F. Dalfovo
Abstract:
A Bose-Einstein condensate in an optical lattice exhibits parametric resonances when the intensity of the lattice is periodically modulated in time. These resonances correspond to an exponential growth of the population of counter-propagating Bogoliubov excitations. A suitable linearization of the Gross-Pitaevskii (GP) equation is used to calculate the stability diagram and the growth rates of t…
▽ More
A Bose-Einstein condensate in an optical lattice exhibits parametric resonances when the intensity of the lattice is periodically modulated in time. These resonances correspond to an exponential growth of the population of counter-propagating Bogoliubov excitations. A suitable linearization of the Gross-Pitaevskii (GP) equation is used to calculate the stability diagram and the growth rates of the unstable modes. The results agree with the ones extracted from time-dependent GP simulations, supporting our previous claim (M. Kraemer et al., Phys. Rev. A (2005) in press) concerning the key role of parametric resonances in the response observed by Stoeferle et al. (Phys. Rev. Lett. 92, 130403 (2004)) in the superfluid regime. The role of the seed excitations required to trigger the parametric amplification is discussed. The possible amplification of the quantum fluctuations present in the quasiparticle vacuum, beyond GP theory, is also addressed, finding interesting analogies with similar processes in nonlinear quantum optics and with the dynamic Casimir effect. Our results can be used in exploiting parametric instabilities for the purpose of spectroscopy, selective amplification of a particular excitation mode and for establishing a new type of thermometry.
△ Less
Submitted 4 July, 2005; v1 submitted 25 May, 2005;
originally announced May 2005.
-
Superconductivity in MgB_2 doped with Ti and C
Authors:
R. H. T. Wilke,
S. L. Bud'ko,
P. C. Canfield,
M. J. Kramer,
Y. Q. Wu,
D. K. Finnemore,
R. J. Suplinskas,
J. V. Marzik,
S. T. Hannahs
Abstract:
Measurements of the superconducting upper critical field, H_{c2}, and critical current density, J_c, have been carried out for MgB_2 doped with Ti and/or C in order to explore the problems encountered if these dopants are used to enhance the superconducting performance. Carbon replaces boron in the MgB_2 lattice and apparently shortens the electronic mean free path thereby raising H_c2. Titanium…
▽ More
Measurements of the superconducting upper critical field, H_{c2}, and critical current density, J_c, have been carried out for MgB_2 doped with Ti and/or C in order to explore the problems encountered if these dopants are used to enhance the superconducting performance. Carbon replaces boron in the MgB_2 lattice and apparently shortens the electronic mean free path thereby raising H_c2. Titanium forms precipitates of either TiB or TiB_2 that enhance the flux pinning and raise J_c. Most of these precipitates are intra-granular in the MgB_2 phase. If approximately 0.5% Ti and approximately 2% C are co-deposited with B to form doped boron fibers and these fibers are in turn reacted in Mg vapor to form MgB_2, the resulting superconductor has H_{c2}(T=0) ~ 25 T and J_c ~ 10,000 A/cm**2 at 5 K and 2.2 T.
△ Less
Submitted 22 November, 2004;
originally announced November 2004.