-
Radial distribution and its spherical harmonics expansion in liquid CO2 at 250 K and 50 bar based on pressure-constant Monte Carlo simulation using Kihara Potential Model
Authors:
Koji Kobashi
Abstract:
The purpose of this article is to compute the radial distribution function of liquid CO2 at 250 K and 50 bar and its expansion coefficients by spherical harmonics as a function of intermolecular distance up to 20 angstroms for all possible combinations of angular indices l, l prime, and m less than or equal to 8, in contrast to past works of limited combinations. The positions and orientations of…
▽ More
The purpose of this article is to compute the radial distribution function of liquid CO2 at 250 K and 50 bar and its expansion coefficients by spherical harmonics as a function of intermolecular distance up to 20 angstroms for all possible combinations of angular indices l, l prime, and m less than or equal to 8, in contrast to past works of limited combinations. The positions and orientations of CO2 molecules were determined by pressure-constant Monte Carlo simulation using a Kihara potential model. It was found that the radial distribution function had an intense peak at 4.05 angstroms and a broad band at around 7.85 angstroms. The expansion coefficients had prominent structures below approximately 7.5 angstroms, showing positive and/or negative peaks, which indicated that the orientational correlations of the central molecule were intense with the molecules present in that region. It was also found that the peaks of some expansion coefficients were not small even when l = 8. The implication of the values of the expansion coefficients as well as their positive/negative peaks, relating to orientational correlation, are yet to be investigated further.
△ Less
Submitted 27 April, 2024;
originally announced April 2024.
-
Tabular Two-Dimensional Correlation Analysis for Multifaceted Characterization Data
Authors:
Shun Muroga,
Satoshi Yamazaki,
Koji Michishio,
Hideaki Nakajima,
Takahiro Morimoto,
Nagayasu Oshima,
Kazufumi Kobashi,
Toshiya Okazaki
Abstract:
We propose tabular two-dimensional correlation analysis for extracting features from multifaceted characterization data, essential for understanding material properties. This method visualizes similarities and phase lags in structural parameter changes through heatmaps, combining hierarchical clustering and asynchronous correlations. We applied the proposed method to datasets of carbon nanotube (C…
▽ More
We propose tabular two-dimensional correlation analysis for extracting features from multifaceted characterization data, essential for understanding material properties. This method visualizes similarities and phase lags in structural parameter changes through heatmaps, combining hierarchical clustering and asynchronous correlations. We applied the proposed method to datasets of carbon nanotube (CNTs) films annealed at various temperatures and revealed the complexity of their hierarchical structures, which include elements like voids, bundles, and amorphous carbon. Our analysis addresses the challenge of attempting to understand the sequence of structural changes, especially in multifaceted characterization data where 11 structural parameters derived from 8 characterization methods interact with complex behavior. The results show how phase lags (asynchronous changes from stimuli) and parameter similarities can illuminate the sequence of structural changes in materials, providing insights into phenomena like the removal of amorphous carbon and graphitization in annealed CNTs. This approach is beneficial even with limited data and holds promise for a wide range of material analyses, demonstrating its potential in elucidating complex material behaviors and properties.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Pressure-Constant Monte Carlo Simulation of Solid CO2 Phase I up to 10 GPa using Kihara Potential Model
Authors:
Koji Kobashi
Abstract:
Solid CO2 phase I was studied using the pressure-constant NPT Monte Carlo simulation and the Kihara core potential in the temperature range below 194 K and the pressure range below 10 GPa. At a pressure of 1 bar, the temperature dependence of the calculated lattice constant agreed reasonably well with experiment. It was found that the random distribution of molecular orientations due to temperatur…
▽ More
Solid CO2 phase I was studied using the pressure-constant NPT Monte Carlo simulation and the Kihara core potential in the temperature range below 194 K and the pressure range below 10 GPa. At a pressure of 1 bar, the temperature dependence of the calculated lattice constant agreed reasonably well with experiment. It was found that the random distribution of molecular orientations due to temperature gave a significant contribution to the increase in the lattice constant. At high pressure, the pressure dependence of the lattice constant also agreed well with experiment.
△ Less
Submitted 29 May, 2023;
originally announced May 2023.
-
Pressure-constant Monte Carlo simulation of phase I of solid CO2 up to 10 GPa at T = 200 K using Kihara potential model
Authors:
Koji Kobashi
Abstract:
This article is a continuation of the past three papers, arXiv:1711.04976 (2017), arXiv:1809.04291 (2018), and arXiv:2006.09673v2 (2020), in which configurations of the molecules around a vacancy in solid CO2 with the Pa3 structure (phase I) were calculated by the Monte Carlo (MC) simulation technique at T < 200 K and at a nominal pressure of P = 1 atm using lattice constants determined in referen…
▽ More
This article is a continuation of the past three papers, arXiv:1711.04976 (2017), arXiv:1809.04291 (2018), and arXiv:2006.09673v2 (2020), in which configurations of the molecules around a vacancy in solid CO2 with the Pa3 structure (phase I) were calculated by the Monte Carlo (MC) simulation technique at T < 200 K and at a nominal pressure of P = 1 atm using lattice constants determined in reference to experimental data. For the intermolecular potential, the Kihara model of a rod-shape core with zero diameter was used. For theoretical consistency, however, the lattice constant should be determined by a pressure-constant MC simulation, i.e. by the NPT simulation. It was anticipated that the NPT simulation, successful for monoatomic molecular fluids, might not work straightforwardly for solid CO2 because of the non-spherical molecular shape and interactions. In fact, it was found in the present work that the protocol of the standard NPT simulation had to be modified for solid CO2 to achieve an equilibrium lattice constant, given an external pressure, within practical computer time and capacity. The modified protocol was used to calculate the P-V relation at 1 bar and from 2 to 10 GPa at which a structural phase transition is known to take place. The temperature was fixed at 200 K. As a result, the calculated P-V relation was similar to those in previous theoretical works, the molar volume being roughly 0.5 % smaller than experimental data.
△ Less
Submitted 1 June, 2021;
originally announced June 2021.
-
Configurations of the third nearest-neighbor molecules forming a vacancy wall and an addition of a CO2 molecule in the vacancy of solid CO2 at T = 0, 100, and 200 K studied by Monte Carlo simulation technique
Authors:
Koji Kobashi
Abstract:
Configurations of the molecules on the wall of a vacancy, formed by removing a central and its first and second nearest-neighbor (NN) molecules in solid CO2 with the Pa3 structure, were calculated by the Monte Carlo simulation technique at T = 0, 100, and 200 K and a nominal pressure of P = 1 bar. It was found that the deviations of both the center-of-mass and the orientational coordinates of the…
▽ More
Configurations of the molecules on the wall of a vacancy, formed by removing a central and its first and second nearest-neighbor (NN) molecules in solid CO2 with the Pa3 structure, were calculated by the Monte Carlo simulation technique at T = 0, 100, and 200 K and a nominal pressure of P = 1 bar. It was found that the deviations of both the center-of-mass and the orientational coordinates of the molecules from the unperturbed coordinates had a three-fold symmetry about a body diagonal axis of the crystal. It was also found that a single CO2 molecule, initially placed in the center of the vacancy, was stabilized at a position close to the vacancy wall. This paper is a continuation of arXiv:1711.04976 [cond-mat.mtrl-sci] (2017) and arXiv:1809.04291 [cond-mat.mtrl-sci] (2018).
△ Less
Submitted 18 October, 2020; v1 submitted 17 June, 2020;
originally announced June 2020.
-
Molecular Configurations Around Single Vacancy in Solid CO2 at 0, 100, and 200 K Studied by Monte Carlo Simulation
Authors:
Koji Kobashi
Abstract:
The configurations of the molecules nearest to a single vacancy in solid CO2 were studied by the Metropolis Monte Carlo (MC) simulation at temperatures T = 0, 100, and 200 K. It was found that distorted orientational configurations at T = 0 and 100 K became uniform at 200 K. The MC simulation was useful to study the local configurations around the vacancy. This work is a continuation of a preceden…
▽ More
The configurations of the molecules nearest to a single vacancy in solid CO2 were studied by the Metropolis Monte Carlo (MC) simulation at temperatures T = 0, 100, and 200 K. It was found that distorted orientational configurations at T = 0 and 100 K became uniform at 200 K. The MC simulation was useful to study the local configurations around the vacancy. This work is a continuation of a precedent paper, arXiv:1711.04976 [cond-mat.mtrl-sci] (2017).
△ Less
Submitted 12 September, 2018;
originally announced September 2018.
-
Molecular Configuration Around Single Vacancy in Solid CO2 at T = 0 K Studied by Monte Carlo Simulation Technique
Authors:
Koji Kobashi
Abstract:
Energetically minimum configurations of the first- and second-nearest neighbor (NN) CO2 molecules surrounding a vacancy, created by removing a single molecule from the Pa3 structure, were calculated by use of the Monte Carlo simulation technique at zero temperature. It was found that among the 1st NN molecules, only six NN molecules, closest to the oxygen atoms of the removed CO2 molecule, signifi…
▽ More
Energetically minimum configurations of the first- and second-nearest neighbor (NN) CO2 molecules surrounding a vacancy, created by removing a single molecule from the Pa3 structure, were calculated by use of the Monte Carlo simulation technique at zero temperature. It was found that among the 1st NN molecules, only six NN molecules, closest to the oxygen atoms of the removed CO2 molecule, significantly changed the positions and orientations, while the other six molecules were not influenced by the creation of the vacancy. The configurations of the molecules no longer had the three-fold symmetry that the Pa3 structure possessed. The influence of the vacancy on the 2nd NN molecules was relatively small.
△ Less
Submitted 17 November, 2017; v1 submitted 14 November, 2017;
originally announced November 2017.
-
Quasi-continuous transition from a Fermi liquid to a spin liquid
Authors:
Tetsuya Furukawa,
Kazuhiko Kobashi,
Yosuke Kurosaki,
Kazuya Miyagawa,
Kazushi Kanoda
Abstract:
The Mott metal-insulator transition-a drastic manifestations of Coulomb interactions among electrons-is the first-order transition of clear discontinuity, as shown by various experiments and the celebrated dynamical mean-field theory. Recent theoretical works, however, suggest that the transition is continuous if the Mott insulator carries an exotic spin liquid with a spinon Fermi surface. Here, w…
▽ More
The Mott metal-insulator transition-a drastic manifestations of Coulomb interactions among electrons-is the first-order transition of clear discontinuity, as shown by various experiments and the celebrated dynamical mean-field theory. Recent theoretical works, however, suggest that the transition is continuous if the Mott insulator carries an exotic spin liquid with a spinon Fermi surface. Here, we demonstrate the case of a quasi-continuous Mott transition from a Fermi liquid to a spin liquid in an organic triangular-lattice system k-(ET)2Cu2(CN)3. Transport experiments performed under fine pressure tuning find that, as the Mott transition is approached, the Fermi-liquid coherence temperature continuously falls to the scale of kelvins with divergent quasi-particle decay rate in the metal side and the charge gap gradually closes in the insulator side. The Clausius-Clapeyron analysis of the pressure-temperature phase diagram provides thermodynamic evidence for the extremely weak first-order nature of the Mott transition. These results suggest that the spin liquid hosts a spinon Fermi surface, which turns into an electron Fermi surface when charges are Mott delocalized.
△ Less
Submitted 18 July, 2017;
originally announced July 2017.
-
Shift of Fermi level by substitutional impurity-atom do** in diamond and cubic- and hexagonal-boron nitrides II. Generalized Gradient Approximation
Authors:
Koji Kobashi
Abstract:
In succession to the first paper (arXiv 1406.6204v5), the impurity-atom concentrations when the Fermi levels are either at the valence band maximum (VBM) or the conduction band minimum (CBM) were identified for diamond, cubic boron nitride (cBN), and hexagonal boron nitride (hBN) using the Korringa-Kohn-Rostoker (KKR) scheme using the local density approximation (LDA). In the present paper, the ge…
▽ More
In succession to the first paper (arXiv 1406.6204v5), the impurity-atom concentrations when the Fermi levels are either at the valence band maximum (VBM) or the conduction band minimum (CBM) were identified for diamond, cubic boron nitride (cBN), and hexagonal boron nitride (hBN) using the Korringa-Kohn-Rostoker (KKR) scheme using the local density approximation (LDA). In the present paper, the generalized gradient approximation (GGA) was used instead of the LDA for exchange-correlation. The impurity atoms were B and N for diamond, Be, Si, and C for cBN, and Be for hBN; these impurity atoms were known in the first paper to form degenerate states by increased impurity-atom concentrations. The impurity-atom concentrations when the Fermi level was located either at the VBM or the CBM were as follows: (i) the B concentration was 0.27 at.% in B-doped diamond, (ii) the N concentration was 0.25 at.% in N-doped diamond, (iii) the concentration of Be substituting B was 0.88 at.% in cBN, (iv) the concentration of Si substituting B was 0.06 at.% in cBN, (v) the concentration of C substituting B was 0.07 at.% in cBN, (vi) the concentration of C substituting N was 0.88 at.% in cBN, and (vii) the concentration of Be substituting B was 1.80 at.% in hBN. The values of (iv) and (v) were significantly smaller than the corresponding values in paper I, but it was attributed to the input parameters used in the present paper, hence it was concluded that the computed concentrations were not sensitive to the GGA used.
△ Less
Submitted 20 December, 2014;
originally announced December 2014.
-
Shift of Fermi level by substitutional impurity-atom do** in diamond and cubic- and hexagonal-boron nitrides
Authors:
Koji Kobashi
Abstract:
The density of states and the band diagrams were computed for diamond, cubic boron nitrde (cBN), and hexagonal boron nitride (hBN) using a Korringa-Kohn-Rostoker (KKR) scheme to investigate the shift of the Fermi level by impurity-atom do** below 10 at.%. The dopant atoms were B and N for diamond, Be, Si, and C for cBN, and Be and C for hBN. It was found that the Fermi level was located at the v…
▽ More
The density of states and the band diagrams were computed for diamond, cubic boron nitrde (cBN), and hexagonal boron nitride (hBN) using a Korringa-Kohn-Rostoker (KKR) scheme to investigate the shift of the Fermi level by impurity-atom do** below 10 at.%. The dopant atoms were B and N for diamond, Be, Si, and C for cBN, and Be and C for hBN. It was found that the Fermi level was located at the valence band maximum or the conduction band minimum in the following seven cases: (i) the B concentration was 0.3 at.% in B-doped diamond, (ii) the N concentration was 0.4 at.% in N-doped diamond, (iii) the concentration of Be substituting B was 0.9 at.% in cBN, (iv) the concentration of Si substituting B was 0.3 at.% in cBN, (v) the concentration of C substituting B was 0.3 at.% in cBN, (vi) the concentration of C substituting N was 0.9 at.% in cBN, and (vii) the concentration of Be substituting B was ~2 at.% in hBN. Each of these values indicates the critical dopant concentration for semiconductor-to-metal transition. In B-doped diamond, it serves a measure for the occurrence of superconductivity at low temperature.
△ Less
Submitted 10 December, 2014; v1 submitted 24 June, 2014;
originally announced June 2014.