Showing 1–17 of 17 results for author: King, E

Inferring interaction potentials from stochastic particle trajectories

Authors: Ella M. King, Megan C. Engel, Caroline Martin, Alp M. Sunol, Qian-Ze Zhu, Sam S. Schoenholz, Vinothan N. Manoharan, Michael P. Brenner

Abstract: Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these meas… ▽ More Accurate interaction potentials between microscopic components such as colloidal particles or cells are crucial to understanding a range of processes, including colloidal crystallization, bacterial colony formation, and cancer metastasis. Even in systems where the precise interaction mechanisms are unknown, effective interactions can be measured to inform simulation and design. However, these measurements are difficult and time-intensive, and often require conditions that are drastically different from in situ conditions of the system of interest. Moreover, existing methods of measuring interparticle potentials rely on constraining a small number of particles at equilibrium, placing limits on which interactions can be measured. We introduce a method for inferring interaction potentials directly from trajectory data of interacting particles. We explicitly solve the equations of motion to find a form of the potential that maximizes the probability of observing a known trajectory. Our method is valid for systems both in and out of equilibrium, is well-suited to large numbers of particles interacting in typical system conditions, and does not assume a functional form of the interaction potential. We apply our method to infer the interactions of colloidal spheres from experimental data, successfully extracting the range and strength of a depletion interaction from the motion of the particles. △ Less

Submitted 3 June, 2024; originally announced June 2024.

Scattered waves fuel emergent activity

Authors: Ella M. King, Mia C. Morrell, Jacqueline B. Sustiel, Matthew Gronert, Hayden Pastor, David G. Grier

Abstract: Particles that scatter waves interact through the waves they scatter. We establish that wave-mediated interactions between dissimilar particles are generically nonreciprocal. This apparent violation of Newton's third law is allowed because the pair of particles does not constitute a closed system; the balance of the system's momentum is carried away by the scattered wave. Nonreciprocal interaction… ▽ More Particles that scatter waves interact through the waves they scatter. We establish that wave-mediated interactions between dissimilar particles are generically nonreciprocal. This apparent violation of Newton's third law is allowed because the pair of particles does not constitute a closed system; the balance of the system's momentum is carried away by the scattered wave. Nonreciprocal interactions enable collections of scatterers to transduce energy out of a wave and use it to power their own motion. Such wave-matter composites therefore are a form of active matter. Their activity, however, is not an inherent property of the individual particles, nor are the particles simply driven by the wave. Instead, the particles' collective motion is an emergent property of their state of organization. This kind of emergent activity should appear in any context where objects scatter waves. As a concrete example, we combine analysis, experiment and simulation to demonstrate how nonreciprocity and emergent activity arise in collections of acoustically levitated spheres. △ Less

Submitted 7 May, 2024; v1 submitted 26 April, 2024; originally announced April 2024.

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

Authors: Morteza Aghaee, Alejandro Alcaraz Ramirez, Zulfi Alam, Rizwan Ali, Mariusz Andrzejczuk, Andrey Antipov, Mikhail Astafev, Amin Barzegar, Bela Bauer, Jonathan Becker, Umesh Kumar Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Leo Bourdet, Arnaud Bousquet, Samuel Boutin, Lucas Casparis, Benjamin James Chapman, Sohail Chatoor, Anna Wulff Christensen, Cassandra Chua, Patrick Codd, William Cole , et al. (137 additional authors not shown)

Abstract: The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostruct… ▽ More The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%. △ Less

Submitted 2 April, 2024; v1 submitted 17 January, 2024; originally announced January 2024.

Comments: Added data on a second measurement of device A and a measurement of device B, expanded discussion of a trivial scenario. Refs added, author list updated

Proofreading mechanism for colloidal self-assembly

Authors: Qian-Ze Zhu, Chrisy Xiyu Du, Ella M. King, Michael P. Brenner

Abstract: Designing components that can robustly self-assemble into structures with biological complexity is a grand challenge for material science. Proofreading and error correction is required to improve assembly yield beyond equilibrium limits, using energy to avoid kinetic traps in the energy landscape. Here we introduce an explicit two staged proofreading scheme for patchy particle colloidal assemblies… ▽ More Designing components that can robustly self-assemble into structures with biological complexity is a grand challenge for material science. Proofreading and error correction is required to improve assembly yield beyond equilibrium limits, using energy to avoid kinetic traps in the energy landscape. Here we introduce an explicit two staged proofreading scheme for patchy particle colloidal assemblies that substantially improves assembly yield and robustness. The first stage implements local rules whereby particles increase their binding strengths when they detect a local environment corresponding to a desired target. The second stage corrects remaining errors, adding a reverse pathway inspired by kinetic proofreading. The scheme shows significant yield improvements, eliminating kinetic traps, giving a much broader temperature range with high yield. Additionally, the scheme is robust against quenched disorder in the components. Our findings illuminate a pathway for advancing programmable design of synthetic living materials, potentially fostering the synthesis of novel biological materials and functional behaviors. △ Less

Submitted 13 December, 2023; originally announced December 2023.

Tuning Colloidal Reactions

Authors: Ryan Krueger, Ella King, Michael Brenner

Abstract: The precise control of complex reactions is critical for biological processes ranging from cell division to metabolism. Synthetic analogues of living materials suffer from our inability to tune chemical reactions with precise outcomes. Here, we leverage differentiable simulators to design nontrivial reaction pathways in colloidal assemblies. By optimizing interactions between reactants and substra… ▽ More The precise control of complex reactions is critical for biological processes ranging from cell division to metabolism. Synthetic analogues of living materials suffer from our inability to tune chemical reactions with precise outcomes. Here, we leverage differentiable simulators to design nontrivial reaction pathways in colloidal assemblies. By optimizing interactions between reactants and substrates, we achieve controlled disassembly of octahedral and icosahedral shells. As a potential engineering target, we design a reaction that provokes the release of a small particle trapped in a shell. △ Less

Submitted 12 December, 2023; originally announced December 2023.

Programmable patchy particles for materials design

Authors: Ella M. King, Chrisy Xiyu Du, Qian-Ze Zhu, Samuel S. Schoenholz, Michael P. Brenner

Abstract: Direct design of complex functional materials would revolutionize technologies ranging from printable organs to novel clean energy devices. However, even incremental steps towards designing functional materials have proven challenging. If the material is constructed from highly complex components, the design space of materials properties rapidly becomes too computationally expensive to search. On… ▽ More Direct design of complex functional materials would revolutionize technologies ranging from printable organs to novel clean energy devices. However, even incremental steps towards designing functional materials have proven challenging. If the material is constructed from highly complex components, the design space of materials properties rapidly becomes too computationally expensive to search. On the other hand, very simple components such as uniform spherical particles are not powerful enough to capture rich functional behavior. Here, we introduce a differentiable materials design model with components that are simple enough to design yet powerful enough to capture complex materials properties: rigid bodies composed of spherical particles with directional interactions (patchy particles). We showcase the method with self-assembly designs ranging from open lattices to self-limiting clusters, all of which are notoriously challenging design goals to achieve using purely isotropic particles. By directly optimizing over the location and interaction of the patches on patchy particles using gradient descent, we dramatically reduce the computation time for finding the optimal building blocks. △ Less

Submitted 8 December, 2023; originally announced December 2023.

Adiabatic quantum trajectories in engineered reservoirs

Authors: Emma C. King, Luigi Giannelli, Raphaël Menu, Johannes N. Kriel, Giovanna Morigi

Abstract: We analyze the efficiency of protocols for adiabatic quantum state transfer assisted by an engineered reservoir. The target dynamics is a quantum trajectory in the Hilbert space and is a fixed point of a time-dependent master equation in the limit of adiabatic dynamics. We specialize to quantum state transfer in a qubit and determine the optimal schedule for a class of time-dependent Lindblad equa… ▽ More We analyze the efficiency of protocols for adiabatic quantum state transfer assisted by an engineered reservoir. The target dynamics is a quantum trajectory in the Hilbert space and is a fixed point of a time-dependent master equation in the limit of adiabatic dynamics. We specialize to quantum state transfer in a qubit and determine the optimal schedule for a class of time-dependent Lindblad equations. The speed limit on state transfer is extracted from a physical model of a qubit coupled to a reservoir, from which the Lindblad equation is derived in the Born-Markov limit. Our analysis shows that the resulting efficiency is comparable to the efficiency of the optimal unitary dynamics. Numerical studies indicate that reservoir-engineered protocols could outperform unitary protocols outside the regime of the Born-Markov master equation, namely, when correlations between the qubit and reservoir become relevant. Our study contributes to the theory of shortcuts to adiabaticity for open quantum systems and to the toolbox of protocols of the NISQ era. △ Less

Submitted 5 July, 2024; v1 submitted 20 November, 2023; originally announced November 2023.

Comments: Accepted for publication in Quantum; 14+7 pages, 7 figures

InAs-Al Hybrid Devices Passing the Topological Gap Protocol

Authors: Morteza Aghaee, Arun Akkala, Zulfi Alam, Rizwan Ali, Alejandro Alcaraz Ramirez, Mariusz Andrzejczuk, Andrey E Antipov, Pavel Aseev, Mikhail Astafev, Bela Bauer, Jonathan Becker, Srini Boddapati, Frenk Boekhout, Jouri Bommer, Esben Bork Hansen, Tom Bosma, Leo Bourdet, Samuel Boutin, Philippe Caroff, Lucas Casparis, Maja Cassidy, Anna Wulf Christensen, Noah Clay, William S Cole, Fabiano Corsetti , et al. (102 additional authors not shown)

Abstract: We present measurements and simulations of semiconductor-superconductor heterostructure devices that are consistent with the observation of topological superconductivity and Majorana zero modes. The devices are fabricated from high-mobility two-dimensional electron gases in which quasi-one-dimensional wires are defined by electrostatic gates. These devices enable measurements of local and non-loca… ▽ More We present measurements and simulations of semiconductor-superconductor heterostructure devices that are consistent with the observation of topological superconductivity and Majorana zero modes. The devices are fabricated from high-mobility two-dimensional electron gases in which quasi-one-dimensional wires are defined by electrostatic gates. These devices enable measurements of local and non-local transport properties and have been optimized via extensive simulations to ensure robustness against non-uniformity and disorder. Our main result is that several devices, fabricated according to the design's engineering specifications, have passed the topological gap protocol defined in Pikulin et al. [arXiv:2103.12217]. This protocol is a stringent test composed of a sequence of three-terminal local and non-local transport measurements performed while varying the magnetic field, semiconductor electron density, and junction transparencies. Passing the protocol indicates a high probability of detection of a topological phase hosting Majorana zero modes as determined by large-scale disorder simulations. Our experimental results are consistent with a quantum phase transition into a topological superconducting phase that extends over several hundred millitesla in magnetic field and several millivolts in gate voltage, corresponding to approximately one hundred micro-electron-volts in Zeeman energy and chemical potential in the semiconducting wire. These regions feature a closing and re-opening of the bulk gap, with simultaneous zero-bias conductance peaks at both ends of the devices that withstand changes in the junction transparencies. The extracted maximum topological gaps in our devices are 20-60 $μ$eV. This demonstration is a prerequisite for experiments involving fusion and braiding of Majorana zero modes. △ Less

Submitted 8 March, 2024; v1 submitted 6 July, 2022; originally announced July 2022.

Comments: Final version

Long-range Kitaev chain in a thermal bath: Analytic techniques for time-dependent systems and environments

Authors: Emma C. King, Michael Kastner, Johannes N. Kriel

Abstract: We construct and solve a "minimal model" with which nonequilibrium phenomena in many-body open quantum systems can be studied analytically under time-dependent parameter changes in the system and/or the bath. Coupling a suitable configuration of baths to a Kitaev chain, we self-consistently derive a Lindblad master equation which, at least in the absence of explicit time dependencies, leads to the… ▽ More We construct and solve a "minimal model" with which nonequilibrium phenomena in many-body open quantum systems can be studied analytically under time-dependent parameter changes in the system and/or the bath. Coupling a suitable configuration of baths to a Kitaev chain, we self-consistently derive a Lindblad master equation which, at least in the absence of explicit time dependencies, leads to thermalization. Using the method of Third Quantization we derive time-evolution equations for the correlation matrix, which we relate to the occupation of the system's quasiparticle modes. These results permit analytic and efficient numeric descriptions of the nonequilibrium dynamics of open Kitaev chains under a wide range of driving protocols, which in turn facilitate the investigation of the interplay between bath-induced dissipation and the generation of coherent excitations by nonadiabatic driving. We advertise this minimal model of maximum simplicity for the study of finite-temperature generalizations of Kibble-Zurek ramps, Floquet physics, and many other nonequilibrium protocols of quantum many-body systems driven by time-varying parameters and/or temperatures. △ Less

Submitted 15 April, 2022; originally announced April 2022.

Comments: 12 pages, 4 figures; companion paper to "Universal cooling dynamics towards a quantum critical point" by the same authors and submitted on the same day

Universal cooling dynamics toward a quantum critical point

Authors: Emma C. King, Johannes N. Kriel, Michael Kastner

Abstract: We investigate the loss of adiabaticity when cooling a many-body quantum system from an initial thermal state toward a quantum critical point. The excitation density, which quantifies the degree of adiabaticity of the dynamics, is found to obey scaling laws in the cooling velocity as well as in the initial and final temperatures of the cooling protocol. The scaling laws are universal, governed by… ▽ More We investigate the loss of adiabaticity when cooling a many-body quantum system from an initial thermal state toward a quantum critical point. The excitation density, which quantifies the degree of adiabaticity of the dynamics, is found to obey scaling laws in the cooling velocity as well as in the initial and final temperatures of the cooling protocol. The scaling laws are universal, governed by the critical exponents of the quantum phase transition. The validity of these statements is shown analytically for a Kitaev quantum wire coupled to Markovian baths and argued to be valid under rather general conditions. Our results establish that quantum critical properties can be probed dynamically at finite temperature, without even varying the control parameter of the quantum phase transition. △ Less

Submitted 3 February, 2023; v1 submitted 15 April, 2022; originally announced April 2022.

Comments: 6+5 pages, 2+3 figures; companion paper to arXiv:2204.07594

Journal ref: Phys. Rev. Lett. 130, 050401 (2023)

Improved tracking of particles with highly correlated motion

Authors: Ella M. King, Zizhao Wang, David A. Weitz, Frans Spaepen, Michael P. Brenner

Abstract: Despite significant advances in particle imaging technologies over the past two decades, few advances have been made in particle tracking, i.e. linking individual particle positions across time series data. The state-of-the-art tracking algorithm is highly effective for systems in which the particles behave mostly independently. However, these algorithms become inaccurate when particle motion is h… ▽ More Despite significant advances in particle imaging technologies over the past two decades, few advances have been made in particle tracking, i.e. linking individual particle positions across time series data. The state-of-the-art tracking algorithm is highly effective for systems in which the particles behave mostly independently. However, these algorithms become inaccurate when particle motion is highly correlated, such as in dense or strongly interacting systems. Accurate particle tracking is essential in the study of the physics of dense colloids, such as the study of dislocation formation, nucleation, and shear transformations. Here, we present a new method for particle tracking that incorporates information about the correlated motion of the particles. We demonstrate significant improvement over the state-of-the-art tracking algorithm in simulated data on highly correlated systems. △ Less

Submitted 24 January, 2022; originally announced January 2022.

Comments: 6 pages, 5 figures

Sculpting liquids with ultrathin shells

Authors: Yousra Timounay, Alexander R. Hartwell, Mengfei He, D. Eric King, Lindsay K. Murphy, Vincent Démery, Joseph D. Paulsen

Abstract: Thin elastic films can spontaneously attach to liquid interfaces, offering a platform for tailoring their physical, chemical, and optical properties. Current understanding of the elastocapillarity of thin films is based primarily on studies of planar sheets. We show that curved shells can be used to manipulate interfaces in qualitatively different ways. We elucidate a regime where an ultrathin she… ▽ More Thin elastic films can spontaneously attach to liquid interfaces, offering a platform for tailoring their physical, chemical, and optical properties. Current understanding of the elastocapillarity of thin films is based primarily on studies of planar sheets. We show that curved shells can be used to manipulate interfaces in qualitatively different ways. We elucidate a regime where an ultrathin shell with vanishing bending rigidity imposes its own rest shape on a liquid surface, using experiment and theory. Conceptually, the pressure across the interface "inflates" the shell into its original shape. The setup is amenable to optical applications as the shell is transparent, free of wrinkles, and may be manufactured over a range of curvatures. △ Less

Submitted 9 September, 2021; v1 submitted 19 July, 2021; originally announced July 2021.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 127, 108002 (2021)

Long-range two-hybrid-qubit gates mediated by a microwave cavity with red sidebands

Authors: J. C. Abadillo-Uriel, Evelyn King, S. N. Coppersmith, Mark Friesen

Abstract: Implementing two-qubit gates via strong coupling between quantum-dot qubits and a superconducting microwave cavity requires achieving coupling rates that are much faster than decoherence rates. Typically, this involves tuning the qubit either to a sweet spot, where it is relatively insensitive to charge noise, or to a point where it is resonant with the microwave cavity. Unfortunately, such operat… ▽ More Implementing two-qubit gates via strong coupling between quantum-dot qubits and a superconducting microwave cavity requires achieving coupling rates that are much faster than decoherence rates. Typically, this involves tuning the qubit either to a sweet spot, where it is relatively insensitive to charge noise, or to a point where it is resonant with the microwave cavity. Unfortunately, such operating points seldom coincide. Here, we theoretically investigate several schemes for performing gates between two quantum-dot hybrid qubits, mediated by a microwave cavity. The rich physics of the quantum dot hybrid qubit gives rise to two types of sweet spots, which can occur at operating points with strong charge dipole moments. Such strong interactions provide new opportunities for off-resonant gating, thereby removing one of the main obstacles for long-distance two-qubit gates. Our results suggest that the numerous tuning knobs of quantum dot hybrid qubits make them good candidates for strong coupling. In particular, we show that off-resonant red-sideband-mediated two-qubit gates can exhibit fidelities $>$95\% for realistic operating parameters, and we describe improvements that could potentially yield gate fidelities $>$99\%. △ Less

Submitted 19 June, 2021; originally announced June 2021.

Comments: 15 pages, 5 figures

Journal ref: Phys. Rev. A 104, 032612 (2021)

Self-assembling kinetics: Accessing a new design space via differentiable statistical-physics models

Authors: Carl P. Goodrich, Ella M. King, Samuel S. Schoenholz, Ekin D. Cubuk, Michael Brenner

Abstract: The inverse problem of designing component interactions to target emergent structure is fundamental to numerous applications in biotechnology, materials science, and statistical physics. Equally important is the inverse problem of designing emergent kinetics, but this has received considerably less attention. Using recent advances in automatic differentiation, we show how kinetic pathways can be p… ▽ More The inverse problem of designing component interactions to target emergent structure is fundamental to numerous applications in biotechnology, materials science, and statistical physics. Equally important is the inverse problem of designing emergent kinetics, but this has received considerably less attention. Using recent advances in automatic differentiation, we show how kinetic pathways can be precisely designed by directly differentiating through statistical-physics models, namely free energy calculations and molecular dynamics simulations. We consider two systems that are crucial to our understanding of structural self-assembly: bulk crystallization and small nanoclusters. In each case we are able to assemble precise dynamical features. Using gradient information, we manipulate interactions among constituent particles to tune the rate at which these systems yield specific structures of interest. Moreover, we use this approach to learn non-trivial features about the high-dimensional design space, allowing us to accurately predict when multiple kinetic features can be simultaneously and independently controlled. These results provide a concrete and generalizable foundation for studying non-structural self-assembly, including kinetic properties as well as other complex emergent properties, in a vast array of systems. △ Less

Submitted 18 November, 2020; v1 submitted 28 October, 2020; originally announced October 2020.

Comments: 5 figures

Impact of Rigidity on Molecular Self-Assembly

Authors: Ella M. King, Matthew A. Gebbie, Nicholas A. Melosh

Abstract: Rigid, cage-like molecules, like diamondoids, show unique self-assembly behavior, such as templating 1-D nanomaterial assembly via pathways that are typically blocked for such bulky substituents. We investigate molecular forces between diamondoids to explore why molecules with high structural rigidity exhibit these novel assembly pathways. The rigid nature of diamondoids significantly lowers confi… ▽ More Rigid, cage-like molecules, like diamondoids, show unique self-assembly behavior, such as templating 1-D nanomaterial assembly via pathways that are typically blocked for such bulky substituents. We investigate molecular forces between diamondoids to explore why molecules with high structural rigidity exhibit these novel assembly pathways. The rigid nature of diamondoids significantly lowers configurational entropy, and we hypothesize that this influences molecular interaction forces. To test this concept, we calculated the distance-dependent impact of entropy on assembly using molecular dynamics simulations. To isolate pairwise entropic and enthalpic contributions to assembly, we considered pairs of molecules in a thermal bath, fixed at set intermolecular separations but otherwise allowed to freely move. By comparing diamondoids to linear alkanes, we draw out the impact of rigidity on the entropy and enthalpy of pairwise interactions. We find that linear alkanes actually exhibit stronger van der Waals interactions than diamondoids at contact, because the bulky structure of diamondoids induces larger net atomic separations. Yet, we also find that diamondoids pay lower entropic penalties when assembling into contact pairs. Thus, the cage-like shape of diamondoids introduces an enthalpic penalty at contact, but the penalty is counterbalanced by entropic effects. Investigating the distance dependence of entropic forces provides a mechanism to explore how rigidity influences molecular assembly. Our results show that low entropic penalties paid by diamondoids can explain the effectiveness of diamondoids in templating nanomaterial assembly. Hence, tuning molecular rigidity can be an effective strategy for controlling the assembly of functional materials, such as biomimetic surfaces and nanoscale materials. △ Less

Submitted 16 October, 2019; v1 submitted 12 October, 2018; originally announced October 2018.

Comments: 19 pages, 7 figures

Journal ref: Langmuir 2019, 35, 48, 16062-16069

Lifting of Spin Blockade by Charged Impurities in Si-MOS Double Quantum Dot Devices

Authors: Evelyn King, Joshua S. Schoenfield, M. J. Calderón, Belita Koiller, André Saraiva, Xuedong Hu, HongWen Jiang, Mark Friesen, S. N. Coppersmith

Abstract: One obstacle that has slowed the development of electrically gated metal-oxide-semiconductor (MOS) singlet-triplet qubits is the frequent lack of observed spin blockade, even in samples with large singlet-triplet energy splittings. We present theoretical and experimental evidence that the cause of this problem in MOS double quantum dots is the stray positive charges in the oxide inducing acciden… ▽ More One obstacle that has slowed the development of electrically gated metal-oxide-semiconductor (MOS) singlet-triplet qubits is the frequent lack of observed spin blockade, even in samples with large singlet-triplet energy splittings. We present theoretical and experimental evidence that the cause of this problem in MOS double quantum dots is the stray positive charges in the oxide inducing accidental levels near the device's active region that allow spin blockade lifting. We also present evidence that these effects can be mitigated by device design modifications, such as overlap** gates. △ Less

Submitted 14 April, 2020; v1 submitted 29 July, 2018; originally announced July 2018.

Comments: 10 pages, 8 figures

Journal ref: Phys. Rev. B 101, 155411 (2020)

Impurity mediated nucleation in hexadecane-in-water emulsions

Authors: Amy Herhold, Deniz Ertas, Alex J. Levine, H. E. King Jr

Abstract: We report detailed nucleation studies on the liquid-to-solid transition of hexadecane using nearly monodisperse hexadecane-in-water emulsions. A careful consideration of the kinetics of isothermal and nonisothermal freezing show deviations from predictions of classical nucleation theory, if one assumes that the emulsion droplet population is homogeneous. Similar deviations have been observed pre… ▽ More We report detailed nucleation studies on the liquid-to-solid transition of hexadecane using nearly monodisperse hexadecane-in-water emulsions. A careful consideration of the kinetics of isothermal and nonisothermal freezing show deviations from predictions of classical nucleation theory, if one assumes that the emulsion droplet population is homogeneous. Similar deviations have been observed previously. As an explanation, we propose a novel argument based on the dynamic generation of droplet heterogeneity mediated by mobile impurities. This proposal is in excellent agreement with existing data. △ Less

Submitted 6 November, 1998; originally announced November 1998.

Comments: RevTeX 3.0, 11 pages with 7 embedded eps figures, \documentstyle[aps,twocolumn,floats,epsf]{revtex}. Submitted to Phys. Rev. E