Showing 1–18 of 18 results for author: Kats, M A

For sky-facing passive radiative cooling, are wavelength-selective emitters the best choice?

Authors: Yeonghoon **, Mikhail A. Kats

Abstract: For passive cooling via thermal radiation toward the sky, it is known that an ideal selective emitter (SE) with high emissivity only in the 8-13 um atmospheric transparency window can reach a lower equilibrium temperature than an ideal broadband emitter (BE) across the mid infrared. Here, we evaluate whether this principle should guide the development of practical passive radiative cooling technol… ▽ More For passive cooling via thermal radiation toward the sky, it is known that an ideal selective emitter (SE) with high emissivity only in the 8-13 um atmospheric transparency window can reach a lower equilibrium temperature than an ideal broadband emitter (BE) across the mid infrared. Here, we evaluate whether this principle should guide the development of practical passive radiative cooling technologies. We model and compare the cooling performance of sky-facing SEs and BEs at various locations on Earth, accounting for the distributions of atmospheric temperature and gas composition at specific dates and times. We find that for emitter temperatures at or higher than the ambient temperature, an ideal broadband emitter always provides higher net cooling power, while for sub-ambient cooling, an ideal selective emitter is usually slightly better, but the difference in cooling power is small, at most 1-2% of the incident solar power during daytime. Our conclusion is that large-scale deployment of passive radiative cooling technologies should focus on design and manufacturing of scalable low-cost surfaces with the lowest possible solar absorption without worrying too much whether the emitter is broadband or selective. △ Less

Submitted 13 June, 2024; v1 submitted 1 June, 2024; originally announced June 2024.

Comments: Main text + supplementary

Self-referencing photothermal common-path interferometry to measure absorption of Si3N4 membranes for laser-light sails

Authors: Demeng Feng, Tanuj Kumar, Shenwei Yin, Merlin Mah, Phyo Lin, Margaret Fortman, Gabriel R. Jaffe, Chenghao Wan, Hongyan Mei, Yuzhe Xiao, Ron Synowicki, Ronald J. Warzoha, Victor W. Brar, Joseph J. Talghader, Mikhail A. Kats

Abstract: Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled to high speeds by lasers with high intensities. The sails must comprise materials with low optical loss, to minimize the risk of laser damage. Stoichiometric silicon nitride (Si$_3$N$_4$) is a candidate material with low loss in the near infrared, but the precise absorption coefficient has not been characterized i… ▽ More Laser-light sails are a spacecraft concept wherein lightweight "sails" are propelled to high speeds by lasers with high intensities. The sails must comprise materials with low optical loss, to minimize the risk of laser damage. Stoichiometric silicon nitride (Si$_3$N$_4$) is a candidate material with low loss in the near infrared, but the precise absorption coefficient has not been characterized in the membrane form-factor needed for sails. We use photothermal common-path interferometry (PCI), a sensitive pump-probe technique, to measure the absorption coefficient of stoichiometric and nonstoichiometric silicon nitride. To calibrate PCI measurements of membranes, we developed a self-referencing technique where a measurement is performed twice: once on a bare membrane, and a second time with a monolayer of graphene deposited on the membrane. The absorption of the sample with graphene can be measured by both PCI and more-conventional spectroscopic techniques, enabling the calibration of the PCI measurement. We find that with an absorption coefficient of (2.09 $\pm$ 0.76) $\times$ 10$^{-2}$ cm$^{-1}$ at 1064 nm, Si$_3$N$_4$ is a suitable laser-sail material for laser intensities as high as ~10 GW/m$^{2}$, which have been proposed for some laser-sail missions, while silicon-rich SiN$_x$ (x~1), with an absorption coefficient of 7.94 $\pm$ 0.50 cm$^{-1}$, is unlikely to survive such high laser intensities. △ Less

Submitted 5 April, 2024; originally announced April 2024.

Comments: Main text + supplementary

Molten flux growth of single crystals of quasi-1D hexagonal chalcogenide BaTiS3

Authors: Huandong Chen, Shantanu Singh, Hongyan Mei, Guodong Ren, Boyang Zhao, Mythilli Surendran, Yan-Ting Wang, Rohan Mishra, Mikhail A. Kats, Jayakanth Ravichandran

Abstract: BaTiS3, a quasi-1D complex chalcogenide, has gathered considerable scientific and technological interest due to its giant optical anisotropy and electronic phase transitions. However, the synthesis of high-quality BaTiS3 crystals, particularly those featuring crystal sizes of millimeters or larger, remains a challenge. Here, we investigate the growth of BaTiS3 crystals utilizing a molten salt flux… ▽ More BaTiS3, a quasi-1D complex chalcogenide, has gathered considerable scientific and technological interest due to its giant optical anisotropy and electronic phase transitions. However, the synthesis of high-quality BaTiS3 crystals, particularly those featuring crystal sizes of millimeters or larger, remains a challenge. Here, we investigate the growth of BaTiS3 crystals utilizing a molten salt flux of either potassium iodide, or a mixture of barium chloride and barium iodide. The crystals obtained through this method exhibit a substantial increase in volume compared to those synthesized via the chemical vapor transport method, while preserving their intrinsic optical and electronic properties. Our flux growth method provides a promising route towards the production of high-quality, large-scale single crystals of BaTiS3, which will greatly facilitate advanced characterizations of BaTiS3 and its practical applications that require large crystal dimensions. Additionally, our approach offers an alternative synthetic route for other emerging complex chalcogenides. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Infrared Optical Anisotropy in Quasi-1D Hexagonal Chalcogenide BaTiSe3

Authors: Boyang Zhao, Hongyan Mei, Zhengyu Du, Shantanu Singh, Tieyan Chang, Jiaheng Li, Nicholas S. Settineri, Simon J. Teat, Yu-Sheng Chen, Stephen B. Cronin, Mikhail A. Kats, Jayakanth Ravichandran

Abstract: Polarimetric infrared detection bolsters IR thermography by leveraging the polarization of light. Optical anisotropy, i.e., birefringence and dichroism, can be leveraged to achieve polarimetric detection. Recently, giant optical anisotropy was discovered in quasi-1D narrow-bandgap hexagonal perovskite sulfides, A1+xTiS3, specifically BaTiS3[1,2] and Sr9/8TiS3[3,4]. In these materials, the critical… ▽ More Polarimetric infrared detection bolsters IR thermography by leveraging the polarization of light. Optical anisotropy, i.e., birefringence and dichroism, can be leveraged to achieve polarimetric detection. Recently, giant optical anisotropy was discovered in quasi-1D narrow-bandgap hexagonal perovskite sulfides, A1+xTiS3, specifically BaTiS3[1,2] and Sr9/8TiS3[3,4]. In these materials, the critical role of atomic-scale structure modulations[4,5] in the unconventional electrical[5,6], optical[7,8], and thermal[7,9] properties raises the broader question of other materials that belong to this family. To address this issue, for the first time, we synthesized high-quality single crystals of a largely unexplored member of the A1+xTiX3 (X = S, Se) family, BaTiSe3. Single-crystal X-ray diffraction determined the room-temperature structure with the P31c space group, which is a superstructure of the earlier reported[10] P63/mmc structure. The crystal structure of BaTiSe3 features antiparallel c-axis displacements similar to BaTiS3,[2] but is of lower symmetry. Polarization-resolved Raman and Fourier transform infrared (FTIR) spectroscopy were used to characterize the optical anisotropy of BaTiSe3, whose refractive index along the ordinary (perpendicular to c) and extraordinary (parallel to c) optical axes was quantitatively determined by combining ellipsometry studies with FTIR. With a giant birefringence Δn~0.9, BaTiSe3 emerges as a new candidate for miniaturized birefringent optics for mid-wave infrared to long-wave infrared imaging. △ Less

Submitted 3 February, 2024; originally announced February 2024.

Giant Modulation of Refractive Index from Picoscale Atomic Displacements

Authors: Boyang Zhao, Guodong Ren, Hongyan Mei, Vincent C. Wu, Shantanu Singh, Gwan-Yeong Jung, Huandong Chen, Raynald Giovine, Shanyuan Niu, Arashdeep S. Thind, Jad Salman, Nick S. Settineri, Bryan C. Chakoumakos, Michael E. Manley, Raphael P. Hermann, Andrew R. Lupini, Miaofang Chi, Jordan A. Hachtel, Arkadiy Simonov, Simon J. Teat, Raphaële J. Clément, Mikhail A. Kats, J. Ravichandran, Rohan Mishra

Abstract: Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the… ▽ More Structural disorder has been shown to enhance and modulate magnetic, electrical, dipolar, electrochemical, and mechanical properties of materials. However, the possibility of obtaining novel optical and optoelectronic properties from structural disorder remains an open question. Here, we show unambiguous evidence of disorder in the form of anisotropic, picoscale atomic displacements modulating the refractive index tensor and resulting in the giant optical anisotropy observed in BaTiS$_3$, a quasi-one-dimensional hexagonal chalcogenide. Single crystal X-ray diffraction studies reveal the presence of antipolar displacements of Ti atoms within adjacent TiS$_6$ chains along the c-axis, and three-fold degenerate Ti displacements in the a-b plane. $^{47/49}$Ti solid-state NMR provides additional evidence for those Ti displacements in the form of a three-horned NMR lineshape resulting from a low symmetry local environment around Ti atoms. We used scanning transmission electron microscopy to directly observe the globally disordered Ti a-b plane displacements and find them to be ordered locally over a few unit cells. First-principles calculations show that the Ti a-b plane displacements selectively reduce the refractive index along the ab-plane, while having minimal impact on the refractive index along the chain direction, thus resulting in a giant enhancement in the optical anisotropy. By showing a strong connection between structural disorder with picoscale displacements and the optical response in BaTiS$_3$, this study opens a pathway for designing optical materials with high refractive index and functionalities such as large optical anisotropy and nonlinearity. △ Less

Submitted 19 March, 2024; v1 submitted 6 October, 2023; originally announced October 2023.

Comments: 24 pages, 3 figures

The Effect of Dust and Hotspots on the Thermal Stability of Laser Sails

Authors: Gabriel R. Jaffe, Gregory R. Holdman, Min Seok Jang, Demeng Feng, Mikhail A. Kats, Victor Watson Brar

Abstract: Laser sails propelled by gigawatt-scale ground-based laser arrays have the potential to reach relativistic speeds, traversing the solar system in hours and reaching nearby stars in years. Here, we describe the danger interplanetary dust poses to the survival of a laser sail during its acceleration phase. We show through multi-physics simulations how localized heating from a single optically absorb… ▽ More Laser sails propelled by gigawatt-scale ground-based laser arrays have the potential to reach relativistic speeds, traversing the solar system in hours and reaching nearby stars in years. Here, we describe the danger interplanetary dust poses to the survival of a laser sail during its acceleration phase. We show through multi-physics simulations how localized heating from a single optically absorbing dust particle on the sail can initiate a thermal-runaway process that rapidly spreads and destroys the entire sail. We explore potential mitigation strategies, including increasing the in-plane thermal conductivity of the sail to reduce the peak temperature at hotspots and isolating the absorptive regions of the sail which can burn away individually. △ Less

Submitted 22 June, 2023; v1 submitted 24 March, 2023; originally announced March 2023.

Comments: 7 pages, 4 figures

Journal ref: Nano Letters 23, 6852 (2023)

Electrically tunable VO2-metal metasurface for mid-infrared switching, limiting, and nonlinear isolation

Authors: Jonathan King, Chenghao Wan, Tae Joon Park, Sanket Despande, Zhen Zhang, Shriram Ramanathan, Mikhail A. Kats

Abstract: We demonstrate an electrically controlled metal-VO2 metasurface for the mid-wave infrared that simultaneously functions as a tunable optical switch, an optical limiter with a tunable limiting threshold, and a nonlinear optical isolator with a tunable operating range. The tunability is achieved via Joule heating through the metal comprising the metasurface, resulting in an integrated optoelectronic… ▽ More We demonstrate an electrically controlled metal-VO2 metasurface for the mid-wave infrared that simultaneously functions as a tunable optical switch, an optical limiter with a tunable limiting threshold, and a nonlinear optical isolator with a tunable operating range. The tunability is achieved via Joule heating through the metal comprising the metasurface, resulting in an integrated optoelectronic device. As an optical switch, the device has an experimental transmission ratio of ~100 when varying the bias current. Operating as an optical limiter, we demonstrated tunability of the limiting threshold from 20 mW to 180 mW of incident laser power. Similar degrees of tunability are also achieved for nonlinear optical isolation, which enables asymmetric (nonreciprocal) transmission. △ Less

Submitted 21 July, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: Main text + supplementary

Colossal optical anisotropy from atomic-scale modulations

Authors: Hongyan Mei, Guodong Ren, Boyang Zhao, Jad Salman, Gwan Yeong Jung, Huandong Chen, Shantanu Singh, Arashdeep S. Thind, John Cavin, Jordan A. Hachtel, Miaofang Chi, Shanyuan Niu, Graham Joe, Chenghao Wan, Nick Settineri, Simon J. Teat, Bryan C. Chakoumakos, Jayakanth Ravichandran, Rohan Mishra, Mikhail A. Kats

Abstract: In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface pol… ▽ More In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface polaritons and hyperbolic phonon polaritons. Layered "van der Waals" materials, with strong intra-layer bonding and weak inter-layer bonding, can feature some of the largest optical anisotropy; however, their use in most optical systems is limited because their optic axis is out of the plane of the layers and the layers are weakly attached, making the anisotropy hard to access. Here, we demonstrate that a bulk crystal with subtle periodic modulations in its structure -- Sr9/8TiS3 -- is transparent and positive-uniaxial, with extraordinary index n_e = 4.5 and ordinary index n_o = 2.4 in the mid- to far-infrared. The excess Sr, compared to stoichiometric SrTiS3, results in the formation of TiS6 trigonal-prismatic units that break the infinite chains of face-shared TiS6 octahedra in SrTiS3 into periodic blocks of five TiS6 octahedral units. The additional electrons introduced by the excess Sr subsequently occupy the TiS6 octahedral blocks to form highly oriented and polarizable electron clouds, which selectively boost the extraordinary index n_e and result in record birefringence (Δn > 2.1 with low loss). The connection between subtle structural modulations and large changes in refractive index suggests new categories of anisotropic materials and also tunable optical materials with large refractive-index modulation and low optical losses. △ Less

Submitted 21 July, 2023; v1 submitted 28 February, 2023; originally announced March 2023.

Comments: Main text + supplementary

Heavily doped zinc oxide with plasma frequencies in the telecommunication wavelength range

Authors: Alexander Koch, Hongyan Mei, Jura Rensberg, Martin Hafermann, Jad Salman, Chenghao Wan, Raymond Wambold, Daniel Blaschke, Heidemarie Schmidt, Jürgen Salfeld, Sebastian Geburt, Mikhail A. Kats, Carsten Ronning

Abstract: We demonstrate heavy and hyper do** of ZnO by a combination of gallium (Ga) ion implantation using a focused ion beam (FIB) system and post-implantation laser annealing. Ion implantation allows for the incorporation of impurities with nearly arbitrary concentrations, and the laser-annealing process enables dopant activation close to or beyond the solid-solubility limit of Ga in ZnO. We achieved… ▽ More We demonstrate heavy and hyper do** of ZnO by a combination of gallium (Ga) ion implantation using a focused ion beam (FIB) system and post-implantation laser annealing. Ion implantation allows for the incorporation of impurities with nearly arbitrary concentrations, and the laser-annealing process enables dopant activation close to or beyond the solid-solubility limit of Ga in ZnO. We achieved heavily doped ZnO:Ga with free-carrier concentrations of ~10^21 cm^(-3), resulting in a plasma wavelength of 1.02 um, which is substantially shorter than the telecommunication wavelength of 1.55 um. Thus, our approach enables the control of the plasma frequency of ZnO from the far infrared down to 1.02 um, providing a promising plasmonic material for applications in this regime. △ Less

Submitted 31 October, 2022; originally announced October 2022.

Comments: Main text + supplementary

Wavelength-by-wavelength temperature-independent thermal radiation utilizing an insulator-metal transition

Authors: Jonathan King, Alireza Shahsafi, Zhen Zhang, Chenghao Wan, Yuzhe Xiao, Chengzi Huang, Yifei Sun, Patrick J. Roney, Shriram Ramanathan, Mikhail A. Kats

Abstract: Both the magnitude and spectrum of the blackbody-radiation distribution change with temperature. Here, we designed the temperature-dependent spectral emissivity of a coating to counteract all the changes in the blackbody-radiation distribution over a certain temperature range, enabled by the nonhysteretic insulator-to-metal phase transition of SmNiO3. At each wavelength within the long-wave infrar… ▽ More Both the magnitude and spectrum of the blackbody-radiation distribution change with temperature. Here, we designed the temperature-dependent spectral emissivity of a coating to counteract all the changes in the blackbody-radiation distribution over a certain temperature range, enabled by the nonhysteretic insulator-to-metal phase transition of SmNiO3. At each wavelength within the long-wave infrared atmospheric-transparency window, the thermal radiance of our coating remains nearly constant over a temperature range of at least 20 °C. Our approach can conceal thermal gradients and transient temperature changes from infrared imaging systems, including those that discriminate by wavelength, such as multispectral and hyperspectral cameras. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Comments: Main text + supplementary

Infrared Optical Spectroscopy of Molten Fluorides: Methods, Electronic and Vibrational Data, Structural Interpretation, and Relevance to Radiative Heat Transfer

Authors: Will B. Derdeyn, Sara Mastromarino, Ruchi Gakhar, Mark H. Anderson, Mikhail A. Kats, Raluca O. Scarlat

Abstract: To help address the need for predicting radiative heat transfer (RHT) behavior of molten salts, we conducted a comprehensive review of methods and data from infrared optical spectroscopic measurements on molten fluoride salts. Transmittance, reflectance, and trans-reflectance experimental methods are discussed, along with the corresponding data reduction methodology and the limitations of each tec… ▽ More To help address the need for predicting radiative heat transfer (RHT) behavior of molten salts, we conducted a comprehensive review of methods and data from infrared optical spectroscopic measurements on molten fluoride salts. Transmittance, reflectance, and trans-reflectance experimental methods are discussed, along with the corresponding data reduction methodology and the limitations of each technique. Optical spectroscopy is a convenient indirect probe for changes in structural parameters with temperature and composition. Electronic and vibrational absorption data for transition-metal, lanthanide, and actinide solutes and vibrational absorption data for alkali and alkaline earth fluoride solvents are compiled, and the corresponding structural interpretation is discussed and compared with other experimental and theoretical work. We find that solvent and solute vibrational absorption can be significant in the mid-infrared, resulting in near-infrared edges of significance to RHT. Extrapolation and averaging of existing edge data leads to estimated gray absorption coefficient values at 700 degrees C of 493 m^(-1) for FLiBe and 148 m^(-1) for FLiNaK, both within the range of 1 to 6000 m^(-1) identified to be of engineering relevance for radiative heat transfer analysis. △ Less

Submitted 29 March, 2022; originally announced March 2022.

Comments: Review article

Tuning carrier density and phase transitions in oxide semiconductors using focused ion beams

Authors: Hongyan Mei, Alexander Koch, Chenghao Wan, Jura Rensberg, Zhen Zhang, Jad Salman, Martin Hafermann, Maximilian Schaal, Yuzhe Xiao, Raymond Wambold, Shriram Ramanathan, Carsten Ronning, Mikhail A. Kats

Abstract: We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable do** of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subs… ▽ More We demonstrate spatial modification of the optical properties of thin-film metal oxides, zinc oxide and vanadium dioxide as representatives, using a commercial focused ion beam (FIB) system. Using a Ga+ FIB and thermal annealing, we demonstrated variable do** of a band semiconductor, zinc oxide (ZnO), achieving carrier concentrations from 10^18 cm-3 to 10^20 cm-3. Using the same FIB without subsequent thermal annealing, we defect-engineered a correlated semiconductor, vanadium dioxide (VO2), locally modifying its insulator-to-metal transition (IMT) temperature by range of ~25 degrees C. Such area-selective modification of metal oxides by direct writing using a FIB provides a simple, mask-less route to the fabrication of optical structures, especially when multiple or continuous levels of do** or defect density are required. △ Less

Submitted 2 June, 2022; v1 submitted 3 February, 2022; originally announced February 2022.

Comments: Main text + supplementary. Updated manuscript with some more science

Thermal runaway of silicon-based laser sails

Authors: Gregory R. Holdman, Gabriel R. Jaffe, Min Seok Jang, Demeng Feng, Mikhail A. Kats, Victor Watson Brar

Abstract: Laser sail-based spacecraft -- where a powerful earth-based laser propels a lightweight outer-space vehicle -- have been recently proposed by the Breakthrough Starshot Initiative as a means of reaching relativistic speeds for interstellar spacetravel. The laser intensity at the sail required for this task is at least 1 GW$\cdot$m$^{-2}$ and, at such high intensities, thermal management of the sail… ▽ More Laser sail-based spacecraft -- where a powerful earth-based laser propels a lightweight outer-space vehicle -- have been recently proposed by the Breakthrough Starshot Initiative as a means of reaching relativistic speeds for interstellar spacetravel. The laser intensity at the sail required for this task is at least 1 GW$\cdot$m$^{-2}$ and, at such high intensities, thermal management of the sail becomes a significant challenge even when using materials with low absorption coefficients. Silicon has been proposed as one leading candidate material for the sail due to its low sub-bandgap absorption and high index of refraction, which allows for low-mass-density designs. However, here we show that the temperature-dependent bandgap of silicon combined with two-photon absorption processes can lead to thermal runaway for even the most optimistic viable assumptions of the material quality. From our calculations, we set bounds on the maximum laser intensities that can be used for a thermally stable, Si-based laser sail. △ Less

Submitted 12 October, 2021; originally announced October 2021.

Fast recovery of ion-irradiation-induced defects in Ge2Sb2Te5 thin films at room temperature

Authors: Martin Hafermann, Robin Schock, Chenghao Wan, Jura Rensberg, Mikhail A. Kats, Carsten Ronning

Abstract: Phase-change materials serve a broad field of applications ranging from non-volatile electronic memory to optical data storage by providing reversible, repeatable, and rapid switching between amorphous and crystalline states accompanied by large changes in the electrical and optical properties. Here, we demonstrate how ion irradiation can be used to tailor disorder in initially crystalline Ge2Sb2T… ▽ More Phase-change materials serve a broad field of applications ranging from non-volatile electronic memory to optical data storage by providing reversible, repeatable, and rapid switching between amorphous and crystalline states accompanied by large changes in the electrical and optical properties. Here, we demonstrate how ion irradiation can be used to tailor disorder in initially crystalline Ge2Sb2Te5 (GST) thin films via the intentional creation of lattice defects. We found that continuous Ar ion irradiation at room temperature of GST films causes complete amorphization of GST when exceeding 0.6 (for rock-salt GST) and 3 (for hexagonal GST) displacements per atom (n_dpa). While the transition from rock-salt to amorphous GST is caused by progressive amorphization via the accumulation of lattice defects, several transitions occur in hexagonal GST upon ion irradiation. In hexagonal GST, the creation of point defects and small defect clusters leads to disordering of intrinsic vacancy layers (van der Waals gaps) that drives the electronic metal-insulator transition. Increasing disorder then induces a structural transition from hexagonal to rock-salt and then leads to amorphization. Furthermore, we observed different annealing behavior of defects for rock-salt and hexagonal GST. The higher amorphization threshold in hexagonal GST compared to rock-salt GST is caused by an increased defect-annealing rate, i.e., a higher resistance against ion-beam-induced disorder. Moreover, we observed that the recovery of defects in GST is on the time scale of seconds or less at room temperature. △ Less

Submitted 9 September, 2021; v1 submitted 2 September, 2021; originally announced September 2021.

Comments: Main text + supplementary. New version to slightly update the acknowledgements

Scalable near-infrared graphene plasmonic resonators exhibiting strong non-local and electron quantization effects

Authors: Joel. F. Siegel, Jonathan H. Dwyer, Anjali Suresh, Nathaniel S. Safron, Margaret Fortman, Chenghao Wan, Jonathan W. Choi, Wei Wei, Vivek Saraswat, Wyatt A. Behn, Mikhail A. Kats, Michael S. Arnold, Padma Gopalan, Victor W. Brar

Abstract: Graphene plasmonic resonators have been broadly studied in the terahertz and mid-infrared ranges because of their electrical tunability and large confinement factors which can enable dramatic enhancement of light-matter coupling. In this work, we demonstrate that the characteristic scaling laws of graphene plasmons change for smaller (< 40 nm) plasmonic wavelengths, expanding the operational frequ… ▽ More Graphene plasmonic resonators have been broadly studied in the terahertz and mid-infrared ranges because of their electrical tunability and large confinement factors which can enable dramatic enhancement of light-matter coupling. In this work, we demonstrate that the characteristic scaling laws of graphene plasmons change for smaller (< 40 nm) plasmonic wavelengths, expanding the operational frequencies of graphene plasmonic resonators into the near-infrared (NIR) and modifying their optical confinement properties. We utilize a novel bottom-up block copolymer lithography method that substantially improves upon top-down methods to create resonators as narrow as 12 nm over centimeter-scale areas. Measurements of these structures reveal that their plasmonic resonances are strongly influenced by non-local and quantum effects, which push their resonant frequency into the NIR (2.2 um), almost double the frequency of previous experimental works. The confinement factors of these resonators, meanwhile, reach 137 +/- 25, amongst the largest reported in literature for an optical cavity. While our findings indicate that the enhancement of some 'forbidden' transitions are an order of magnitude weaker than predicted, the combined NIR response and large confinement of these structures make them an attractive platform to explore ultra-strongly enhanced spontaneous emission. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Comments: 4 Figures. Supplement included

Self-stabilizing laser sails based on optical metasurfaces

Authors: Joel Siegel, Anthony Wang, Sergey G. Menabde, Mikhail A. Kats, Min Seok Jang, Victor Watson Brar

Abstract: This article investigates the stability of 'laser sail'-style spacecraft constructed from dielectric metasurfaces with areal densities $<$1g/m$^2$. We show that the microscopic optical forces exerted on a metasurface by a high power laser (100 GW) can be engineered to achieve passive self-stabilization, such that it is optically trapped inside the drive beam, and self-corrects against angular and… ▽ More This article investigates the stability of 'laser sail'-style spacecraft constructed from dielectric metasurfaces with areal densities $<$1g/m$^2$. We show that the microscopic optical forces exerted on a metasurface by a high power laser (100 GW) can be engineered to achieve passive self-stabilization, such that it is optically trapped inside the drive beam, and self-corrects against angular and lateral perturbations. The metasurfaces we study consist of a patchwork of beam-steering elements that reflect light at different angles and efficiencies. These properties are varied for each element across the area of the metasurface, and we use optical force modeling tools to explore the behavior of several metasurfaces with different scattering properties as they interact with beams that have different intensity profiles. Finally, we use full-wave numerical simulation tools to extract the actual optical forces that would be imparted on Si/SiO$_{2}$ metasurfaces consisting of more than 400 elements, and we compare those results to our analytical models. We find that under first-order approximations, there are certain metasurface designs that can propel 'laser-sail'-type spacecraft in a stable manner. △ Less

Submitted 21 March, 2019; originally announced March 2019.

Comments: 9 Pages, 7 Figures

Temperature-independent thermal radiation

Authors: Alireza Shahsafi, Patrick Roney, You Zhou, Zhen Zhang, Yuzhe Xiao, Chenghao Wan, Raymond Wambold, Jad Salman, Zhaoning Yu, Jiarui Li, Jerzy T. Sadowski, Riccardo Comin, Shriram Ramanathan, Mikhail A. Kats

Abstract: Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin t… ▽ More Thermal emission is the process by which all objects at non-zero temperatures emit light, and is well-described by the classic Planck, Kirchhoff, and Stefan-Boltzmann laws. For most solids, the thermally emitted power increases monotonically with temperature in a one-to-one relationship that enables applications such as infrared imaging and non-contact thermometry. Here, we demonstrate ultrathin thermal emitters that violate this one-to-one relationship via the use of samarium nickel oxide (SmNiO3), a strongly correlated quantum material that undergoes a fully reversible, temperature-driven solid-state phase transition. The smooth and hysteresis-free nature of this unique insulator-to-metal (IMT) phase transition allows us to engineer the temperature dependence of emissivity to precisely cancel out the intrinsic blackbody profile described by the Stefan-Boltzmann law, for both heating and cooling. Our design results in temperature-independent thermally emitted power within the long-wave atmospheric transparency window (wavelengths of 8 - 14 um), across a broad temperature range of ~30 °C, centered around ~120 °C. The ability to decouple temperature and thermal emission opens a new gateway for controlling the visibility of objects to infrared cameras and, more broadly, new opportunities for quantum materials in controlling heat transfer. △ Less

Submitted 19 September, 2019; v1 submitted 1 February, 2019; originally announced February 2019.

Comments: Main text and supplementary

Giant Hall photoconductivity in narrow-gapped Dirac materials

Authors: Justin C. W. Song, Mikhail A. Kats

Abstract: Carrier dynamics acquire a new character in the presence of Bloch-band Berry curvature, which naturally arises in gapped Dirac materials (GDMs). Here we argue that photoresponse in GDMs with small band gaps is dramatically enhanced by Berry curvature. This manifests in a giant and saturable Hall photoconductivity when illuminated by circularly polarized light. Unlike Hall motion arising from a Lor… ▽ More Carrier dynamics acquire a new character in the presence of Bloch-band Berry curvature, which naturally arises in gapped Dirac materials (GDMs). Here we argue that photoresponse in GDMs with small band gaps is dramatically enhanced by Berry curvature. This manifests in a giant and saturable Hall photoconductivity when illuminated by circularly polarized light. Unlike Hall motion arising from a Lorentz force in a magnetic field, which impedes longitudinal carrier motion, Hall photoconductivity arising from Berry curvature can boost longitudinal carrier transport. In GDMs, this results in a helicity-dependent photoresponse in the Hall regime, where photoconductivity is dominated by its Hall component. We find that the induced Hall conductivity per incident irradiance is enhanced by up to six orders of magnitude when moving from the visible regime (with corresponding band gaps) to the far infrared. These results suggest that narrow-gap GDMs are an ideal test-bed for the unique physics that arise in the presence of Berry curvature, and open a new avenue for infrared and terahertz optoelectronics. △ Less

Submitted 15 December, 2016; originally announced December 2016.

Journal ref: NanoLett. 16, 7346-7351 (2016)