Showing 1–45 of 45 results for author: Kataoka, M

Statistical study and parallelisation of multiplexed single-electron sources

Authors: S. Norimoto, P. See, N. Schoinas, I. Rungger, T. O. Boykin II, M. D. Stewart Jr, J. P. Griffiths, C. Chen, D. A. Ritchie, M. Kataoka

Abstract: Increasing electric current from a single-electron source is a main challenge in an effort to establish the standard of the ampere defined by the fixed value of the elementary charge $e$ and operation frequency $f$. While the current scales with $f$, due to an operation frequency limit for maintaining accurate single-electron transfer, parallelisation of singleelectron sources is expected to be a… ▽ More Increasing electric current from a single-electron source is a main challenge in an effort to establish the standard of the ampere defined by the fixed value of the elementary charge $e$ and operation frequency $f$. While the current scales with $f$, due to an operation frequency limit for maintaining accurate single-electron transfer, parallelisation of singleelectron sources is expected to be a more practical solution to increase the generated electric current $I = Nef$, where $N$ is a number of parallelised devices. One way to parallelise single-electron sources without increasing the complexity in device operation is to use a common gate. Such a scheme will require each device to have the same operation parameters for single-electron transfer. In order to investigate this possibility, we study the statistics for operation gate voltages using single-electron sources embedded in a multiplexer circuit. The multiplexer circuit allows us to measure 64 single-electron sources individually in a single cooldown. We also demonstrate the parallelisation of three single-electron sources and observe the generated current enhanced by a factor of three. △ Less

Submitted 8 July, 2024; originally announced July 2024.

Comments: 5 pages, 3 figures

Photon emission by hot electron injection across a lateral \textit{pn} junction

Authors: S. Norimoto, R. Saxena, P. See, A. Nasir, J. P. Griffiths, C. Chen, D. A. Ritchie, M. Kataoka

Abstract: We demonstrate a method to generate photons by injecting hot electrons into a {\it pn} junction within a \ce{GaAs/AlGaAs} heterostructure. Hot electrons are generated by biasing across a mesoscopic potential in {\it n}-type region and travel toward {\it p}-type region through quantum Hall edge channel in the presence of magnetic field perpendicular to the substrate. The {\it p}-type region is crea… ▽ More We demonstrate a method to generate photons by injecting hot electrons into a {\it pn} junction within a \ce{GaAs/AlGaAs} heterostructure. Hot electrons are generated by biasing across a mesoscopic potential in {\it n}-type region and travel toward {\it p}-type region through quantum Hall edge channel in the presence of magnetic field perpendicular to the substrate. The {\it p}-type region is created several microns away from the hot electron emitter by inducing interfacial charges using a surface gate. The energy relaxation of the hot electrons is suppressed by separating the orbitals before and after longitudinal-optical (LO) phonon emission. This technique enables the hot electrons to reach the {\it p}-type region and to recombine with induced holes followed by photon emissions. Hot electron-induced hole recombination is confirmed by a peak around \qty{810}{nm} in an optical spectrum that corresponds to excitonic recombination in a \ce{GaAs} quantum well. An asymmetric structure observed in the optical spectrum as a function of the magnetic field originates from the chiral transport of the hot electrons in the Hall edge channel. We propose the combination of our technology and on-demand single-electron source would enable the development of an on-demand single photon source that is an essential building block to drive an optical quantum circuit and to transfer quantum information for a long distance. △ Less

Submitted 6 June, 2024; originally announced June 2024.

Comments: 8 pages, 4 figures

Fast characterization of multiplexed single-electron pumps with machine learning

Authors: N. Schoinas, Y. Rath, S. Norimoto, W. Xie, P. See, J. P. Griffiths, C. Chen, D. A. Ritchie, M. Kataoka, A. Rossi, I. Rungger

Abstract: We present an efficient machine learning based automated framework for the fast tuning of single-electron pump devices into current quantization regimes. It uses a sparse measurement approach based on an iterative active learning algorithm to take targeted measurements in the gate voltage parameter space. When compared to conventional parameter scans, our automated framework allows us to decrease… ▽ More We present an efficient machine learning based automated framework for the fast tuning of single-electron pump devices into current quantization regimes. It uses a sparse measurement approach based on an iterative active learning algorithm to take targeted measurements in the gate voltage parameter space. When compared to conventional parameter scans, our automated framework allows us to decrease the number of measurement points by about an order of magnitude. This corresponds to an eight-fold decrease in the time required to determine quantization errors, which are estimated via an exponential extrapolation of the first current plateau embedded into the algorithm. We show the robustness of the framework by characterizing 28 individual devices arranged in a GaAs/AlGaAs multiplexer array, which we use to identify a subset of devices suitable for parallel operation at communal gate voltages. The method opens up the possibility to efficiently scale the characterization of such multiplexed devices to a large number of pumps. △ Less

Submitted 31 May, 2024; originally announced May 2024.

Comments: 6 pages, 3 figures

Evanescently coupled topological ring-waveguide systems for chip-scale ultrahigh frequency phononic circuits

Authors: Daiki Hatanaka, Hiroaki Takeshita, Motoki Kataoka, Hajime Okamoto, Kenji Tsuruta, Hiroshi Yamaguchi

Abstract: Topological phononics enabling backscattering-immune transport is expected to improve the performance of electromechanical systems for classical and quantum information technologies. Nonetheless, most of the previous demonstrations utilized macroscale and low-frequency structures and thus offered little experimental insight into ultrahigh frequency phonon transport, especially in chip-scale circui… ▽ More Topological phononics enabling backscattering-immune transport is expected to improve the performance of electromechanical systems for classical and quantum information technologies. Nonetheless, most of the previous demonstrations utilized macroscale and low-frequency structures and thus offered little experimental insight into ultrahigh frequency phonon transport, especially in chip-scale circuits. Here, we report microwave phonon transmissions in a microscopic topological ring-waveguide coupled system, which is an important building block for wave-based signal processing. The elastic waves in the topological waveguide evanescently couple to the ring resonator, while maintaining the valley pseudospin polarization. The resultant waves are robust to backscattering even in the tiny hexagonal ring, generating a resonant phonon circulation. Furthermore, the evanescently coupled structure allows for a critical coupling, where valley-dependent ring-waveguide interference enables blocking of the topological edge transmission. Our demonstrations reveal the capability of using topological phenomena to manipulate ultrahigh frequency elastic waves in intricate phononic circuits for classical and quantum signal-processing applications. △ Less

Submitted 6 October, 2023; originally announced October 2023.

Comments: 13 pages, 9 figures

Spectroscopy of hot-electron pair emission from a driven quantum dot

Authors: Jens Schulenborg, Jonathan D. Fletcher, Masaya Kataoka, Janine Splettstoesser

Abstract: On-demand emission of individual electrons for the implementation of flying qubits and quantum electron-optics experiments requires precise knowledge and tunability of emission times and energies. Crucially, for confined electron sources such as driven quantum dots, the effect of local Coulomb interaction on these emission properties needs to be understood, in particular if multiple particles are… ▽ More On-demand emission of individual electrons for the implementation of flying qubits and quantum electron-optics experiments requires precise knowledge and tunability of emission times and energies. Crucially, for confined electron sources such as driven quantum dots, the effect of local Coulomb interaction on these emission properties needs to be understood, in particular if multiple particles are emitted close in time or near-simultaneously. This paper theoretically analyzes electron-pair emission from an ac driven quantum dot, detailing the competing effects of the electron-electron interaction, the time-dependent potential forming the quantum dot, and of the quantum-state properties such as degeneracy on the emission times and energies. We complement a numerical analysis of the coherent Schrödinger evolution of two particles in a driven potential with a master-equation description for strongly interacting electrons tunneling stochastically into a weakly coupled conductor. This captures a broad range of different influences on the emitted particles and thereby guides the development of single-electron sources higher control over two-particle emission properties. △ Less

Submitted 1 April, 2024; v1 submitted 27 March, 2023; originally announced March 2023.

Comments: 11 pages plus appendix

Journal ref: Phys. Rev. B 109, 115433 (2024)

Precision measurement of an electron pump at 2 GHz

Authors: Stephen Giblin, Gento Yamahata, Akira Fujiwara, Masaya Kataoka

Abstract: A well-characterised sample of silicon tunable-barrier electron pump has been operated at a frequency of 2 GHz using a custom drive waveform, generating a pump current of 320 pA. Precision measurements of the current were made as a function of pump control parameters, using a blind protocol, over a 7-week campaign. The combined standard uncertainty for each 10 hour measurement was 0.1 parts per mi… ▽ More A well-characterised sample of silicon tunable-barrier electron pump has been operated at a frequency of 2 GHz using a custom drive waveform, generating a pump current of 320 pA. Precision measurements of the current were made as a function of pump control parameters, using a blind protocol, over a 7-week campaign. The combined standard uncertainty for each 10 hour measurement was 0.1 parts per million. The pump current exhibits a plateau along the exit gate voltage flat to approximately 0.1 parts per million, but offset from ef by 0.2 parts per million. This offset may be a sign of errors in the current traceability chain, indicating a limit to the accuracy of small current scaling using existing methods based on cryogenic current comparators. △ Less

Submitted 11 January, 2023; originally announced January 2023.

Comments: 14 pages, 13 figures, including supplementary information in one file

Time-resolved Coulomb collision of single electrons

Authors: J. D. Fletcher, W. Park, S. Ryu, P. See, J. P. Griffiths, G. A. C. Jones, I. Farrer, D. A. Ritchie, H. -S. Sim, M. Kataoka

Abstract: Precise control over interactions between ballistic electrons will enable us to exploit Coulomb interactions in novel ways, to develop high-speed sensing, to reach a non-linear regime in electron quantum optics and to realise schemes for fundamental two-qubit operations on flying electrons. Time-resolved collisions between electrons have been used to probe the indistinguishability, Wigner function… ▽ More Precise control over interactions between ballistic electrons will enable us to exploit Coulomb interactions in novel ways, to develop high-speed sensing, to reach a non-linear regime in electron quantum optics and to realise schemes for fundamental two-qubit operations on flying electrons. Time-resolved collisions between electrons have been used to probe the indistinguishability, Wigner function and decoherence of single electron wavepackets. Due to the effects of screening, none of these experiments were performed in a regime where Coulomb interactions were particularly strong. Here we explore the Coulomb collision of two high energy electrons in counter-propagating ballistic edge states. We show that, in this kind of unscreened device, the partitioning probabilities at different electron arrival times and barrier height are shaped by Coulomb repulsion between the electrons. This prevents the wavepacket overlap required for the manifestation of fermionic exchange statistics but suggests a new class of devices for studying and manipulating interactions of ballistic single electrons. △ Less

Submitted 7 October, 2022; originally announced October 2022.

Semiconductor-based electron flying qubits: Review on recent progress accelerated by numerical modelling

Authors: Hermann Edlbauer, Junliang Wang, Thierry Crozes, Pierre Perrier, Seddik Ouacel, Clément Geffroy, Giorgos Georgiou, Eleni Chatzikyriakou, Antonio Lacerda-Santos, Xavier Waintal, D. Christian Glattli, Preden Roulleau, Jayshankar Nath, Masaya Kataoka, Janine Splettstoesser, Matteo Acciai, Maria Cecilia da Silva Figueira, Kemal Öztas, Alex Trellakis, Thomas Grange, Oleg M. Yevtushenko, Stefan Birner, Christopher Bäuerle

Abstract: The progress of charge manipulation in semiconductor-based nanoscale devices opened up a novel route to realise a flying qubit with a single electron. In the present review, we introduce the concept of these electron flying qubits, discuss their most promising realisations and show how numerical simulations are applicable to accelerate experimental development cycles. Addressing the technological… ▽ More The progress of charge manipulation in semiconductor-based nanoscale devices opened up a novel route to realise a flying qubit with a single electron. In the present review, we introduce the concept of these electron flying qubits, discuss their most promising realisations and show how numerical simulations are applicable to accelerate experimental development cycles. Addressing the technological challenges of flying qubits that are currently faced by academia and quantum enterprises, we underline the relevance of interdisciplinary cooperation to move emerging quantum industry forward. The review consists of two main sections: Pathways towards the electron flying qubit: We address three routes of single-electron transport in GaAs-based devices focusing on surface acoustic waves, hot-electron emission from quantum dot pumps and Levitons. For each approach, we discuss latest experimental results and point out how numerical simulations facilitate engineering the electron flying qubit. Numerical modelling of quantum devices: We review the full stack of numerical simulations needed for fabrication of the flying qubits. Choosing appropriate models, examples of basic quantum mechanical simulations are explained in detail. We discuss applications of open-source (KWANT) and the commercial (nextnano) platforms for modelling the flying qubits. The discussion points out the large relevance of software tools to design quantum devices tailored for efficient operation. △ Less

Submitted 4 July, 2022; originally announced July 2022.

Comments: 44 pages, 13 figure, this review will be published in Collection on "Quantum Industry" of EPJ Quantum Technology

Journal ref: EPJ Quantum Technology, vol. 9, article number 21 (2022)

Single-Hole Pump in Germanium

Authors: A. Rossi, N. W. Hendrickx, A. Sammak, M. Veldhorst, G. Scappucci, M. Kataoka

Abstract: Single-charge pumps are the main candidates for quantum-based standards of the unit ampere because they can generate accurate and quantized electric currents. In order to approach the metrological requirements in terms of both accuracy and speed of operation, in the past decade there has been a focus on semiconductor-based devices. The use of a variety of semiconductor materials enables the univer… ▽ More Single-charge pumps are the main candidates for quantum-based standards of the unit ampere because they can generate accurate and quantized electric currents. In order to approach the metrological requirements in terms of both accuracy and speed of operation, in the past decade there has been a focus on semiconductor-based devices. The use of a variety of semiconductor materials enables the universality of charge pump devices to be tested, a highly desirable demonstration for metrology, with GaAs and Si pumps at the forefront of these tests. Here, we show that pum** can be achieved in a yet unexplored semiconductor, i.e. germanium. We realise a single-hole pump with a tunable-barrier quantum dot electrostatically defined at a Ge/SiGe heterostructure interface. We observe quantized current plateaux by driving the system with a single sinusoidal drive up to a frequency of 100 MHz. The operation of the prototype was affected by accidental formation of multiple dots, probably due to disorder potential, and random charge fluctuations. We suggest straightforward refinements of the fabrication process to improve pump characteristics in future experiments. △ Less

Submitted 31 May, 2021; originally announced May 2021.

Comments: 7 pages, 4 figures

Journal ref: J. Phys. D: Appl. Phys. 54 434001 (2021)

Asymmetric arms maximise visibility in hot-electron interferometers

Authors: Clarissa J. Barratt, Sungguen Ryu, Lewis A. Clark, H. -S. Sim, Masaya Kataoka, Clive Emary

Abstract: We consider theoretically an electronic Mach-Zehnder interferometer constructed from quantum Hall edge channels and quantum point contacts, fed with single electrons from a dynamic quantum dot source. By considering the energy dependence of the edge-channel guide centres, we give an account of the phase averaging in this set up that is particularly relevant for the short, high-energy wavepackets i… ▽ More We consider theoretically an electronic Mach-Zehnder interferometer constructed from quantum Hall edge channels and quantum point contacts, fed with single electrons from a dynamic quantum dot source. By considering the energy dependence of the edge-channel guide centres, we give an account of the phase averaging in this set up that is particularly relevant for the short, high-energy wavepackets injected by this type of electron source. We present both analytic and numerical results for the energy-dependent arrival time distributions of the electrons and also give an analysis of the delay times associated with the quantum point contacts and their effects on the interference patterns. A key finding is that, contrary to expectation, maximum visibility requires the interferometer arms to be different in length, with an offset of up to a micron for typical parameters. By designing interferometers that incorporate this asymmetry in their geometry, phase-averaging effects can be overcome such that visibility is only limited by other incoherent mechanisms. △ Less

Submitted 15 September, 2021; v1 submitted 4 April, 2021; originally announced April 2021.

Comments: 12 pages; 6 figures

Journal ref: Phys. Rev. B 104, 035436 (2021)

Mitigating decoherence in hot electron interferometry

Authors: Lewis A. Clark, Masaya Kataoka, Clive Emary

Abstract: Due to their high energy, hot electrons in quantum Hall edge states can be considered as single particles that have the potential to be used for quantum optics-like experiments. Unlike photons, however, electrons typically undergo scattering processes in transport, which results in a loss of coherence and limits their ability to show quantum-coherent behaviour. Here we study theoretically the deco… ▽ More Due to their high energy, hot electrons in quantum Hall edge states can be considered as single particles that have the potential to be used for quantum optics-like experiments. Unlike photons, however, electrons typically undergo scattering processes in transport, which results in a loss of coherence and limits their ability to show quantum-coherent behaviour. Here we study theoretically the decoherence mechanisms of hot electrons in a Mach-Zehnder interferometer, and highlight the role played by both acoustic and optical phonon emission. We discuss optimal choices of experimental parameters and show that high visibilities of $\gtrsim 85\%$ are achievable in hot-electron devices over relatively long distances of 10 $μ$m. We also discuss energy filtration techniques to remove decoherent electrons and show that this can increase visibilities to over $95\%$. This represents an improvement over Fermi-level electron quantum optics, and suggests hot-electron charge pumps as a platform for realising quantum-coherent nanoelectronic devices. △ Less

Submitted 19 October, 2020; v1 submitted 14 March, 2020; originally announced March 2020.

Comments: 23 pages, 7 figures

Journal ref: New J. Phys. 22, 103031 (2020)

Realisation of a quantum current standard at liquid helium temperature with sub-ppm reproducibility

Authors: Stephen Giblin, Emma Mykkänen, Antti Kemppinen, Pekka Immonen, Antti Manninen, Máté Jenei, Mikko Möttönen, Gento Yamahata, Akira Fujiwara, Masaya Kataoka

Abstract: A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the… ▽ More A silicon electron pump operating at the temperature of liquid helium has demonstrated repeatable operation with sub-ppm accuracy. The pump current, approximately 168 pA, is measured by three laboratories, and the measurements agree with the expected current ef within the uncertainties which range from 0.2 ppm to 1.3 ppm. All the measurements are carried out in zero applied magnetic field, and the pump drive signal is a sine wave. The combination of simple operating conditions with high accuracy demonstrates the possibility that an electron pump can operate as a current standard in a National Measurement Institute. We also discuss other practical aspects of using the electron pump as a current standard, such as testing its robustness to changes in the control parameters, and using a rapid tuning procedure to locate the optimal operation point.. △ Less

Submitted 23 January, 2020; v1 submitted 4 December, 2019; originally announced December 2019.

Comments: 7 pages, 5 figures plus an additional 6 pages with 6 figures of supplementary information

Picosecond coherent electron motion in a silicon single-electron source

Authors: Gento Yamahata, Sungguen Ryu, Nathan Johnson, H. -S. Sim, Akira Fujiwara, Masaya Kataoka

Abstract: Understanding ultrafast coherent electron dynamics is necessary for application of a single-electron source to metrological standards, quantum information processing, including electron quantum optics, and quantum sensing. While the dynamics of an electron emitted from the source has been extensively studied, there is as yet no study of the dynamics inside the source. This is because the speed of… ▽ More Understanding ultrafast coherent electron dynamics is necessary for application of a single-electron source to metrological standards, quantum information processing, including electron quantum optics, and quantum sensing. While the dynamics of an electron emitted from the source has been extensively studied, there is as yet no study of the dynamics inside the source. This is because the speed of the internal dynamics is typically higher than 100 GHz, beyond state-of-the-art experimental bandwidth. Here, we theoretically and experimentally demonstrate that the internal dynamics in a silicon singleelectron source comprising a dynamic quantum dot can be detected, utilising a resonant level with which the dynamics is read out as gate-dependent current oscillations. Our experimental observation and simulation with realistic parameters show that an electron wave packet spatially oscillates quantum-coherently at $\sim$ 200 GHz inside the source. Our results will lead to a protocol for detecting such fast dynamics in a cavity and offer a means of engineering electron wave packets. This could allow high-accuracy current sources, high-resolution and high-speed electromagnetic-field sensing, and high-fidelity initialisation of flying qubits. △ Less

Submitted 18 March, 2019; originally announced March 2019.

Journal ref: Nature Nanotechnology 14, 1019-1023 (2019)

Continuous-Variable Tomography of Solitary Electrons

Authors: J. D. Fletcher, N. Johnson, E. Locane, P. See, J. P. Griffiths, I. Farrer, D. A. Ritchie, P. W. Brouwer, V. Kashcheyevs, M. Kataoka

Abstract: A method for characterising the wave-function of freely-propagating particles would provide a useful tool for develo** quantum-information technologies with single electronic excitations. Previous continuous-variable quantum tomography techniques developed to analyse electronic excitations in the energy-time domain have been limited to energies close to the Fermi level. We show that a wideband t… ▽ More A method for characterising the wave-function of freely-propagating particles would provide a useful tool for develo** quantum-information technologies with single electronic excitations. Previous continuous-variable quantum tomography techniques developed to analyse electronic excitations in the energy-time domain have been limited to energies close to the Fermi level. We show that a wideband tomography of single-particle distributions is possible using energy-time filtering and that the Wigner representation of the mixed-state density matrix can be reconstructed for solitary electrons emitted by an on-demand single-electron source. These are highly localised distributions, isolated from the Fermi sea. While we cannot resolve the pure state Wigner function of our excitations due to classical fluctuations, we can partially resolve the chirp and squeezing of the Wigner function imposed by emission conditions and quantify the quantumness of the source. This tomography scheme, when implemented with sufficient experimental resolution, will enable quantum-limited measurements, providing information on electron coherence and entanglement at the individual particle level. △ Less

Submitted 20 January, 2020; v1 submitted 30 January, 2019; originally announced January 2019.

Comments: Updated to published text

Journal ref: Nature Communications 10, 5298 (2019)

Evidence for universality of tunable-barrier electron pumps

Authors: Stephen P. Giblin, Akira Fujiwara, Gento Yamahata, Myung-Ho Bae, Nam Kim, Alessandro Rossi, Mikko Möttönen, Masaya Kataoka

Abstract: We review recent precision measurements on semiconductor tunable-barrier electron pumps operating in a ratchet mode. Seven studies on five different designs of pumps have reported measurements of the pump current with relative total uncertainties around $10^{-6}$ or less. Combined with theoretical models of electron capture by the pumps, these experimental data exhibits encouraging evidence that t… ▽ More We review recent precision measurements on semiconductor tunable-barrier electron pumps operating in a ratchet mode. Seven studies on five different designs of pumps have reported measurements of the pump current with relative total uncertainties around $10^{-6}$ or less. Combined with theoretical models of electron capture by the pumps, these experimental data exhibits encouraging evidence that the pumps operate according to a universal mechanism, independent of the details of device design. Evidence for robustness of the pump current against changes in the control parameters is at a more preliminary stage, but also encouraging, with two studies reporting robustness of the pump current against three or more parameters in the range of $\sim\!5 \times 10^{-7}$ to $\sim\!2 \times 10^{-6}$. This review highlights the need for an agreed protocol for tuning the electron pump for optimal operation, as well as more rigorous evaluations of the robustness in a wide range of pump designs. △ Less

Submitted 23 April, 2019; v1 submitted 16 January, 2019; originally announced January 2019.

Comments: 18 pages, 8 figures

Journal ref: Metrologia vol. 56, 044004 (2019)

Robust operation of a GaAs tunable barrier electron pump

Authors: S. P. Giblin, M. -H. Bae, N. Kim, Ye-Hwan Ahn, M. Kataoka

Abstract: We demonstrate the robust operation of a gallium arsenide tunable-barrier single-electron pump operating with 1 part-per-million accuracy at a temperature of $1.3$~K and a pum** frequency of $500$~MHz. The accuracy of current quantisation is investigated as a function of multiple control parameters, and robust plateaus are seen as a function of three control gate voltages and RF drive power. The… ▽ More We demonstrate the robust operation of a gallium arsenide tunable-barrier single-electron pump operating with 1 part-per-million accuracy at a temperature of $1.3$~K and a pum** frequency of $500$~MHz. The accuracy of current quantisation is investigated as a function of multiple control parameters, and robust plateaus are seen as a function of three control gate voltages and RF drive power. The electron capture is found to be in the decay-cascade, rather than the thermally-broadened regime. The observation of robust plateaus at an elevated temperature which does not require expensive refrigeration is an important step towards validating tunable-barrier pumps as practical current standards. △ Less

Submitted 28 September, 2018; originally announced October 2018.

Comments: 13 pages, 7 figures (4 in main text and 3 in supplementary info

Journal ref: Metrologia vol. 54, pp 299-306 (2017)

Rectification in mesoscopic AC-gated semiconductor devices

Authors: S. P. Giblin, M. Kataoka, J. D. Fletcher, P. See, T. J. B. M. Janssen, J. P. Griffiths, G. A. C. Jones, I. Farrer, D. A. Ritchie

Abstract: We measure the rectified dc currents resulting when a 3-terminal semiconductor device with gate-dependent conductance is driven with an ac gate voltage. The rectified currents exhibit surprisingly complex behaviour as the dc source-drain bias voltage, the dc gate voltage and the amplitude of the ac gate voltage are varied. We obtain good agreement between our data and a model based on simple assum… ▽ More We measure the rectified dc currents resulting when a 3-terminal semiconductor device with gate-dependent conductance is driven with an ac gate voltage. The rectified currents exhibit surprisingly complex behaviour as the dc source-drain bias voltage, the dc gate voltage and the amplitude of the ac gate voltage are varied. We obtain good agreement between our data and a model based on simple assumptions about the stray impedances on the sample chip, over a wide frequency range. This method is applicable to many types of experiment which involve ac gating of a non-linear device, and where an undesireable rectified contribution to the measured signal is present. Finally, we evaluate the small rectified currents flowing in tunable-barrier electron pumps operated in the pinched-off regime. These currents are at most $10^{-12}$ of the pumped current for a pump current of 100 pA. This result is encouraging for the development of tunable-barrier pumps as metrological current standards. △ Less

Submitted 27 September, 2018; originally announced September 2018.

Comments: 7 pages, 5 figures

Journal ref: Journal of Applied Physics vol. 114, 164505 (2013)

Error detection in a tunable-barrier electron pump

Authors: S. P. Giblin, P. See, J. D. Fletcher, T. J. B. M. Janssen, J. P. Griffiths, G. A. C. Jones, I. Farrer, M. Kataoka

Abstract: We measure the average number of electrons loaded into an electrostatically-defined quantum dot (QD) operated as a tunable-barrier electron pump, using a point-contact (PC) charge sensor 1 micron away from the QD. The measurement of the electron number probes the QD loading dynamics even in the limit of slow gate voltage rise-times, when the pumped current is too small to measure. Using simulation… ▽ More We measure the average number of electrons loaded into an electrostatically-defined quantum dot (QD) operated as a tunable-barrier electron pump, using a point-contact (PC) charge sensor 1 micron away from the QD. The measurement of the electron number probes the QD loading dynamics even in the limit of slow gate voltage rise-times, when the pumped current is too small to measure. Using simulations we show that, with optimised QD-PC coupling, the experiment can make single-shot measurements of the number of electrons in the QD with sufficiently high fidelity to test the error rate of the electron pump with metrological precision. △ Less

Submitted 26 September, 2018; originally announced September 2018.

Comments: 6 pages, 4 figures. This is an unpublished study preceding the work published as "High-resolution error detection in the capture process of a single-electron pump", Applied Physics Letters vol. 108, 023502 (2016)

High-resolution error detection in the capture process of a single-electron pump

Authors: S. P. Giblin, P. See, A. Petrie, T. J. B. M. Janssen, I. Farrer, J. P. Griffiths, G. A. C. Jones, D. A. Ritchie, M. Kataoka

Abstract: The dynamic capture of electrons in a semiconductor quantum dot (QD) by raising a potential barrier is a crucial stage in metrological quantized charge pum**. In this work, we use a quantum point contact (QPC) charge sensor to study errors in the electron capture process of a QD formed in a GaAs heterostructure. Using a two-step measurement protocol to compensate for $1/f$ noise in the QPC curre… ▽ More The dynamic capture of electrons in a semiconductor quantum dot (QD) by raising a potential barrier is a crucial stage in metrological quantized charge pum**. In this work, we use a quantum point contact (QPC) charge sensor to study errors in the electron capture process of a QD formed in a GaAs heterostructure. Using a two-step measurement protocol to compensate for $1/f$ noise in the QPC current, and repeating the protocol more than $10^{6}$ times, we are able to resolve errors with probabilities of order $10^{-6}$. For the studied sample, one-electron capture is affected by errors in $\sim30$ out of every million cycles, while two-electron capture was performed more than $10^6$ times with only one error. For errors in one-electron capture, we detect both failure to capture an electron, and capture of two electrons. Electron counting measurements are a valuable tool for investigating non-equilibrium charge capture dynamics, and necessary for validating the metrological accuracy of semiconductor electron pumps. △ Less

Submitted 26 September, 2018; originally announced September 2018.

Comments: 5 pages, 4 figures

Journal ref: Applied Physics Letters vol. 108, 023502 (2016)

Energy relaxation in hot electron quantum optics via acoustic and optical phonon emission

Authors: Clive Emary, Lewis A. Clark, Masaya Kataoka, Nathan Johnson

Abstract: We study theoretically the relaxation of hot quantum-Hall edge-channel electrons under the emission of both acoustic and optical phonons. Aiming to model recent experiments with single-electron sources, we describe simulations that provide the distribution of electron energies and arrival times at a detector a fixed distance from the source. From these simulations we extract an effective rate of e… ▽ More We study theoretically the relaxation of hot quantum-Hall edge-channel electrons under the emission of both acoustic and optical phonons. Aiming to model recent experiments with single-electron sources, we describe simulations that provide the distribution of electron energies and arrival times at a detector a fixed distance from the source. From these simulations we extract an effective rate of emission of optical phonons that contains contributions from both a direct emission process as well as one involving inter-edge-channel transitions that are driven by the sequential emission of first an acoustic -- and then an optical -- phonon. Furthermore, we consider the mean energy loss due to acoustic phonon emission and resultant broadening of the electron energy distribution and derive an effective drift-diffusion model for this process. △ Less

Submitted 13 February, 2019; v1 submitted 31 July, 2018; originally announced July 2018.

Comments: 11 pages; 8 figures

Journal ref: Phys. Rev. B 99, 045306 (2019)

LO-phonon emission rate of hot electrons from an on-demand single-electron source in a GaAs/AlGaAs heterostructure

Authors: N. Johnson, C. Emary, S. Ryu, H. -S. Sim, P. See, J. D. Fletcher, J. P. Griffiths, G. A. C. Jones, I. Farrer, D. A. Ritchie, M. Pepper, T. J. B. M. Janssen, M. Kataoka

Abstract: Using a recently-developed time-of-flight measurement technique with 1 ps time resolution and electron-energy spectroscopy, we developed a method to measure the longitudinal-optical-phonon emission rate of hot electrons travelling along a depleted edge of a quantum Hall bar. A comparison of the experimental results to a single-particle model implies that the main scattering mechanism involves a tw… ▽ More Using a recently-developed time-of-flight measurement technique with 1 ps time resolution and electron-energy spectroscopy, we developed a method to measure the longitudinal-optical-phonon emission rate of hot electrons travelling along a depleted edge of a quantum Hall bar. A comparison of the experimental results to a single-particle model implies that the main scattering mechanism involves a two-step process via intra-Landau-level transition. We show this scattering can be suppressed by controlling the edge potential profile, and a scattering length > 1 mm can be achieved, allowing the use of this system for scalable single-electron device applications. △ Less

Submitted 25 December, 2017; originally announced December 2017.

Comments: 5 pages and supplementary

Journal ref: Phys. Rev. Lett. 121, 137703 (2018)

Thermal-error regime in high-accuracy gigahertz single-electron pum**

Authors: R. Zhao, A. Rossi, S. P. Giblin, J. D. Fletcher, F. E. Hudson, M. Möttönen, M. Kataoka, A. S. Dzurak

Abstract: Single-electron pumps based on semiconductor quantum dots are promising candidates for the emerging quantum standard of electrical current. They can transfer discrete charges with part-per-million (ppm) precision in nanosecond time scales. Here, we employ a metal-oxide-semiconductor silicon quantum dot to experimentally demonstrate high-accuracy gigahertz single-electron pum** in the regime wher… ▽ More Single-electron pumps based on semiconductor quantum dots are promising candidates for the emerging quantum standard of electrical current. They can transfer discrete charges with part-per-million (ppm) precision in nanosecond time scales. Here, we employ a metal-oxide-semiconductor silicon quantum dot to experimentally demonstrate high-accuracy gigahertz single-electron pum** in the regime where the number of electrons trapped in the dot is determined by the thermal distribution in the reservoir leads. In a measurement with traceability to primary voltage and resistance standards, the averaged pump current over the quantized plateau, driven by a \mbox{$1$-GHz} sinusoidal wave in the absence of magnetic field, is equal to the ideal value of $ef$ within a measurement uncertainty as low as $0.27$~ppm. △ Less

Submitted 13 November, 2017; v1 submitted 14 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. Applied 8, 044021 (2017)

Ultrafast Emission and Detection of a Single-Electron Gaussian Wave Packet: A Theoretical Study

Authors: Sungguen Ryu, M. Kataoka, H. -S. Sim

Abstract: Generating and detecting a prescribed single-electron state is an important step towards solid-state fermion optics. We propose how to generate an electron in a Gaussian state, using a quantum-dot pump with gigahertz operation and realistic parameters. With the help of a strong magnetic field, the electron occupies a coherent state in the pump, insensitive to the details of nonadiabatic evolution.… ▽ More Generating and detecting a prescribed single-electron state is an important step towards solid-state fermion optics. We propose how to generate an electron in a Gaussian state, using a quantum-dot pump with gigahertz operation and realistic parameters. With the help of a strong magnetic field, the electron occupies a coherent state in the pump, insensitive to the details of nonadiabatic evolution. The state changes during the emission from the pump, governed by competition between the Landauer-Buttiker traversal time and the passage time. When the former is much shorter than the latter, the emitted state is a Gaussian wave packet. The Gaussian packet can be identified by using a dynamical potential barrier, with a resolution reaching the Heisenberg minimal uncertainty $\hbar/2$. △ Less

Submitted 24 October, 2016; originally announced October 2016.

Journal ref: Phys. Rev. Lett. 117, 146802 (2016)

Ultrafast Voltage Sampling using Single-Electron Wavepackets

Authors: N. Johnson, J. D. Fletcher, D. A. Humphreys, P. See, J. P. Griffiths, G. A. C. Jones, I. Farrer, D. A. Ritchie, M. Pepper, T. J. B. M Janssen, M. Kataoka

Abstract: We demonstrate an ultrafast voltage sampling technique using a stream of electron wavepackets. Electrons are emitted from a single-electron pump and travel through electron waveguides towards a detector potential barrier. Our electrons sample an instantaneous voltage on the gate upon arrival at the detector barrier. Fast sampling is achieved by minimising the duration that the electrons interact w… ▽ More We demonstrate an ultrafast voltage sampling technique using a stream of electron wavepackets. Electrons are emitted from a single-electron pump and travel through electron waveguides towards a detector potential barrier. Our electrons sample an instantaneous voltage on the gate upon arrival at the detector barrier. Fast sampling is achieved by minimising the duration that the electrons interact with the barrier, which can be made as small as a few picoseconds. The value of the instantaneous voltage can be determined by varying the gate voltage to match the barrier height to the electron energy, which is used as a stable reference. The test waveform can be reconstructed by shifting the electron arrival time against it. We argue that this method has scope to increase the bandwidth of voltage sampling to 100 GHz and beyond. △ Less

Submitted 14 October, 2016; v1 submitted 3 October, 2016; originally announced October 2016.

Comments: 9 pages, 4 figures

Journal ref: Appl. Phys. Lett. 110, 102105 (2017)

Time-of-Flight Measurements of Single-Electron Wave Packets in Quantum-Hall Edge States

Authors: M. Kataoka, N. Johnson, C. Emary, P. See, J. P. Griffiths, G. A. C. Jones, I. Farrer, D. A. Ritchie, M. Pepper, T. J. B. M. Janssen

Abstract: We report time-of-flight measurements on electrons travelling in quantum-Hall edge states. Hot-electron wave packets are emitted one per cycle into edge states formed along a depleted sample boundary. The electron arrival time is detected by driving a detector barrier with a square wave that acts as a shutter. By adding an extra path using a deflection barrier, we measure a delay in the arrival ti… ▽ More We report time-of-flight measurements on electrons travelling in quantum-Hall edge states. Hot-electron wave packets are emitted one per cycle into edge states formed along a depleted sample boundary. The electron arrival time is detected by driving a detector barrier with a square wave that acts as a shutter. By adding an extra path using a deflection barrier, we measure a delay in the arrival time, from which the edge-state velocity $v$ is deduced. We find that $v$ follows $1/B$ dependence, in good agreement with the $\vec{E} \times \vec{B}$ drift. The edge potential is estimated from the energy-dependence of $v$ using a harmonic approximation. △ Less

Submitted 9 December, 2015; originally announced December 2015.

Journal ref: Phys. Rev. Lett. 116, 126803 (2016)

Phonon emission and arrival times of electrons from a single-electron source

Authors: C. Emary, A. Dyson, Sungguen Ryu, H. -S. Sim, M. Kataoka

Abstract: In recent charge-pump experiments, single electrons are injected into quantum Hall edge channels at energies significantly above the Fermi level. We consider here the relaxation of these hot edge-channel electrons through longitudinal-optical phonon emission. Our results show that the probability for an electron in the outermost edge channel to emit one or more phonons en route to a detector some… ▽ More In recent charge-pump experiments, single electrons are injected into quantum Hall edge channels at energies significantly above the Fermi level. We consider here the relaxation of these hot edge-channel electrons through longitudinal-optical phonon emission. Our results show that the probability for an electron in the outermost edge channel to emit one or more phonons en route to a detector some microns distant along the edge channel suffers a double-exponential suppression with increasing magnetic field. This explains recent experimental observations. We also describe how the shape of the arrival-time distribution of electrons at the detector reflects the velocities of the electronic states post phonon emission. We show how this can give rise to pronounced oscillations in the arrival-time-distribution width as a function of magnetic field or electron energy. △ Less

Submitted 23 October, 2015; originally announced October 2015.

Comments: 11 pages; 6 figs

Measurement and control of electron wave packets from a single-electron source

Authors: J. Waldie, P. See, V. Kashcheyevs, J. P. Griffiths, I. Farrer, G. A. C. Jones, D. A. Ritchie, T. J. B. M. Janssen, M. Kataoka

Abstract: We report an experimental technique to measure and manipulate the arrival-time and energy distributions of electrons emitted from a semiconductor electron pump, operated as both a single-electron source and a two-electron source. Using an energy-selective detector whose transmission we control on picosecond timescales, we can measure directly the electron arrival-time distribution and we determine… ▽ More We report an experimental technique to measure and manipulate the arrival-time and energy distributions of electrons emitted from a semiconductor electron pump, operated as both a single-electron source and a two-electron source. Using an energy-selective detector whose transmission we control on picosecond timescales, we can measure directly the electron arrival-time distribution and we determine the upper-bound to the distribution width to be 30 ps. We study the effects of modifying the shape of the voltage waveform that drives the electron pump, and show that our results can be explained by a tunneling model of the emission mechanism. This information was in turn used to control the emission-time difference and energy gap between a pair of electrons. △ Less

Submitted 22 July, 2015; v1 submitted 24 March, 2015; originally announced March 2015.

Journal ref: Phys. Rev. B 92, 125305 (2015)

Clock-controlled emission of single-electron wavepackets in a solid-state circuit

Authors: J. D. Fletcher, M. Kataoka, H. Howe, M. Pepper, P. See, S. P. Giblin, J. P. Griffiths, G. A. C. Jones, I. Farrer, D. A. Ritchie, T. J. B. M. Janssen

Abstract: We demonstrate the transmission of single electron wavepackets from a clock-controlled source through an empty high-energy edge channel. The quantum dot source is loaded with single electrons which are then emitted with high kinetic energy ($\sim$150 meV). We find at high magnetic field that these electron can be transported over several microns without inelastic electron-electron or electron-phon… ▽ More We demonstrate the transmission of single electron wavepackets from a clock-controlled source through an empty high-energy edge channel. The quantum dot source is loaded with single electrons which are then emitted with high kinetic energy ($\sim$150 meV). We find at high magnetic field that these electron can be transported over several microns without inelastic electron-electron or electron-phonon scattering. Using a time-resolved spectroscopic technique, we measure the electron energy and wavepacket size at picosecond time scales. We also show how our technique can be used to switch individual electrons into different paths. △ Less

Submitted 20 February, 2013; v1 submitted 20 December, 2012; originally announced December 2012.

Journal ref: Phys. Rev. Lett. 111, 216807 (2013)

Gigahertz quantized charge pum** in graphene quantum dots

Authors: M. R. Connolly, K. L. Chiu, S. P. Giblin, M. Kataoka, J. D. Fletcher, C. Chua, J. P. Griffiths, G. A. C. Jones, V. I. Fal'ko, C. G. Smith, T. J. B. M. Janssen

Abstract: Single electron pumps are set to revolutionize electrical metrology by enabling the ampere to be re-defined in terms of the elementary charge of an electron. Pumps based on lithographically-fixed tunnel barriers in mesoscopic metallic systems and normal/superconducting hybrid turnstiles can reach very small error rates, but only at MHz pum** speeds corresponding to small currents of the order 1… ▽ More Single electron pumps are set to revolutionize electrical metrology by enabling the ampere to be re-defined in terms of the elementary charge of an electron. Pumps based on lithographically-fixed tunnel barriers in mesoscopic metallic systems and normal/superconducting hybrid turnstiles can reach very small error rates, but only at MHz pum** speeds corresponding to small currents of the order 1 pA. Tunable barrier pumps in semiconductor structures have been operated at GHz frequencies, but the theoretical treatment of the error rate is more complex and only approximate predictions are available. Here, we present a monolithic, fixed barrier single electron pump made entirely from graphene. We demonstrate pump operation at frequencies up to 1.4 GHz, and predict the error rate to be as low as 0.01 parts per million at 90 MHz. Combined with the record-high accuracy of the quantum Hall effect and proximity induced Josephson junctions, accurate quantized current generation brings an all-graphene closure of the quantum metrological triangle within reach. Envisaged applications for graphene charge pumps outside quantum metrology include single photon generation via electron-hole recombination in electrostatically doped bilayer graphene reservoirs, and for readout of spin-based graphene qubits in quantum information processing. △ Less

Submitted 27 July, 2012; originally announced July 2012.

Comments: 13 pages, 11 figures, includes supplementary information

Journal ref: Nature Nanotechnology (2013)

Towards a quantum representation of the ampere using single electron pumps

Authors: S. P. Giblin, M. Kataoka, J. D. Fletcher, P. See, T. J. B. M. Janssen, J. P. Griffiths, G. A. C. Jones, I. Farrer, D. A. Ritchie

Abstract: Electron pumps generate a macroscopic electric current by controlled manipulation of single electrons. Despite intensive research towards a quantum current standard over the last 25 years, making a fast and accurate quantised electron pump has proved extremely difficult. Here we demonstrate that the accuracy of a semiconductor quantum dot pump can be dramatically improved by using specially design… ▽ More Electron pumps generate a macroscopic electric current by controlled manipulation of single electrons. Despite intensive research towards a quantum current standard over the last 25 years, making a fast and accurate quantised electron pump has proved extremely difficult. Here we demonstrate that the accuracy of a semiconductor quantum dot pump can be dramatically improved by using specially designed gate drive waveforms. Our pump can generate a current of up to 150 pA, corresponding to almost a billion electrons per second, with an experimentally demonstrated current accuracy better than 1.2 parts per million (ppm) and strong evidence, based on fitting data to a model, that the true accuracy is approaching 0.01 ppm. This type of pump is a promising candidate for further development as a realisation of the SI base unit ampere, following a re-definition of the ampere in terms of a fixed value of the elementary charge. △ Less

Submitted 10 July, 2012; v1 submitted 12 January, 2012; originally announced January 2012.

Comments: 8 pages, 7 figures

Journal ref: Nat. Commun. 3:930 (2012)

Stabilization of single-electron pumps by high magnetic fields

Authors: J. D. Fletcher, M. Kataoka, S. P. Giblin, Sunghun Park, H. -S. Sim, P. See, T. J. B. M. Janssen, J. P. Griffiths, G. A. C. Jones, H. E. Beere, D. A. Ritchie

Abstract: We study the effect of perpendicular magnetic fields on a single-electron system with a strongly time-dependent electrostatic potential. Continuous improvements to the current quantization in these electron pumps are revealed by high-resolution measurements. Simulations show that the sensitivity of tunnel rates to the barrier potential is enhanced, stabilizing particular charge states. Nonadiabati… ▽ More We study the effect of perpendicular magnetic fields on a single-electron system with a strongly time-dependent electrostatic potential. Continuous improvements to the current quantization in these electron pumps are revealed by high-resolution measurements. Simulations show that the sensitivity of tunnel rates to the barrier potential is enhanced, stabilizing particular charge states. Nonadiabatic excitations are also suppressed due to a reduced sensitivity of the Fock-Darwin states to electrostatic potential. The combination of these effects leads to significantly more accurate current quantization. △ Less

Submitted 31 August, 2012; v1 submitted 22 July, 2011; originally announced July 2011.

On-demand single-electron transfer between distant quantum dots

Authors: R. P. G. McNeil, M. Kataoka, C. J. B. Ford, C. H. W. Barnes, D. Anderson, G. A. C. Jones, I. Farrer, D. A. Ritchie

Abstract: Single-electron circuits of the future, consisting of a network of quantum dots, will require a mechanism to transport electrons from one functional part to another. For example, in a quantum computer[1] decoherence and circuit complexity can be reduced by separating qubit manipulation from measurement and by providing some means to transport electrons from one to the other.[2] Tunnelling between… ▽ More Single-electron circuits of the future, consisting of a network of quantum dots, will require a mechanism to transport electrons from one functional part to another. For example, in a quantum computer[1] decoherence and circuit complexity can be reduced by separating qubit manipulation from measurement and by providing some means to transport electrons from one to the other.[2] Tunnelling between neighbouring dots has been demonstrated[3, 4] with great control, and the manipulation of electrons in single and double-dot systems is advancing rapidly.[5-8] For distances greater than a few hundred nanometres neither free propagation nor tunnelling are viable whilst maintaining confinement of single electrons. Here we show how a single electron may be captured in a surface acoustic wave minimum and transferred from one quantum dot to a second unoccupied dot along a long empty channel. The transfer direction may be reversed and the same electron moved back and forth over sixty times without error, a cumulative distance of 0.25 mm. Such on-chip transfer extends communication between quantum dots to a range that may allow the integration of discrete quantum information-processing components and devices. △ Less

Submitted 19 July, 2011; originally announced July 2011.

Comments: 4 pages, 4 figures

Journal ref: Nature 477, 439-442 (22 September 2011)

Single- and few-electron dynamic quantum dots in a perpendicular magnetic field

Authors: S. J. Wright, A. L. Thorn, M. D. Blumenthal, S. P. Giblin, M. Pepper, T. J. B. M. Janssen, M. Kataoka, J. D. Fletcher, G. A. C. Jones, C. A. Nicoll, Godfrey Gumbs, D. A. Ritchie

Abstract: We present experimental studies of the current pumped through a dynamic quantum dot over a wide range of magnetic fields. At low fields we observe repeatable structure indicating increased confinement of the electrons in the dynamic dot. At higher fields (B>3T), we observe structure which changes markedly from device to device suggesting that in this regime the transport is sensitive to local diso… ▽ More We present experimental studies of the current pumped through a dynamic quantum dot over a wide range of magnetic fields. At low fields we observe repeatable structure indicating increased confinement of the electrons in the dynamic dot. At higher fields (B>3T), we observe structure which changes markedly from device to device suggesting that in this regime the transport is sensitive to local disorder. The results are significant for the development of dynamic quantum dot pumps as quantum standards of electrical current. △ Less

Submitted 1 September, 2010; originally announced September 2010.

Comments: 5 pages, 4 figures, submitted to J. Appl. Phys. as an invited paper for ICPS-30, 25th-30th July, Seoul, SK

Journal ref: J. Appl. Phys. 109, 102422 (2011)

Accurate high speed single-electron quantum dot preparation

Authors: S. P. Giblin, S. J. Wright, J. Fletcher, M. Kataoka, M. Pepper, T. J. B. M. Janssen, D. A. Ritchie, C. A. Nicoll, D. Anderson, G. A. C. Jones

Abstract: Using standard microfabrication techniques it is now possible to construct devices, which appear to reliably manipulate electrons one at a time. These devices have potential use as building blocks in quantum computing devices, or as a standard of electrical current derived only from a frequency and the fundamental charge. To date the error rate in semiconductor 'tuneable-barrier' pump devices, tho… ▽ More Using standard microfabrication techniques it is now possible to construct devices, which appear to reliably manipulate electrons one at a time. These devices have potential use as building blocks in quantum computing devices, or as a standard of electrical current derived only from a frequency and the fundamental charge. To date the error rate in semiconductor 'tuneable-barrier' pump devices, those which show most promise for high frequency operation, have not been tested in detail. We present high accuracy measurements of the current from an etched GaAs quantum dot pump, operated at zero source-drain bias voltage with a single AC-modulated gate driving the pump cycle. By comparison with a reference current derived from primary standards, we show that the electron transfer accuracy is better than 15 parts per million. High-resolution studies of the dependence of the pump current on the quantum dot tuning parameters also reveal possible deviations from a model used to describe the pum** cycle. △ Less

Submitted 5 May, 2010; v1 submitted 30 March, 2010; originally announced March 2010.

Comments: 12 pages, 3 figures

Journal ref: New J.Phys.12:073013,2010

Electron interactions in an antidot in the integer quantum Hall regime

Authors: H. -S. Sim, M. Kataoka, C. J. B. Ford

Abstract: A quantum antidot, a submicron depletion region in a two-dimensional electron system, has been actively studied in the past two decades, providing a powerful tool for understanding quantum Hall systems. In a perpendicular magnetic field, electrons form bound states around the antidot. Aharonov-Bohm resonances through such bound states have been experimentally studied, showing interesting phenome… ▽ More A quantum antidot, a submicron depletion region in a two-dimensional electron system, has been actively studied in the past two decades, providing a powerful tool for understanding quantum Hall systems. In a perpendicular magnetic field, electrons form bound states around the antidot. Aharonov-Bohm resonances through such bound states have been experimentally studied, showing interesting phenomena such as Coulomb charging, h/2e oscillations, spectator modes, signatures of electron interactions in the line shape, Kondo effect, etc. None of them can be explained by a simple noninteracting electron approach. Theoretical models for the above observations have been developed recently, such as a capacitive-interaction model for explaining the h/2e oscillations and the Kondo effect, numerical prediction of a hole maximum-density-droplet antidot ground state, and spin density-functional theory for investigating the compressibility of antidot edges. In this review, we summarize such experimental and theoretical works on electron interactions in antidots. △ Less

Submitted 3 December, 2007; v1 submitted 24 November, 2007; originally announced November 2007.

Comments: 73 pages, 28 figures, to be published in Physics Reports. The resolution of some figures is reduced in this upload

Energy-dependent tunnelling from few-electron dynamic quantum dots

Authors: M. R. Astley, M. Kataoka, C. J. B. Ford, C. H. W. Barnes, D. Anderson, G. A. C. Jones, I. Farrer, D. A. Ritchie, M. Pepper

Abstract: We measure the electron escape-rate from surface-acoustic-wave dynamic quantum dots (QDs) through a tunnel barrier. Rate-equations are used to extract the tunnelling rates, which change by an order of magnitude with tunnel-barrier gate voltage. We find that the tunnelling rates depend on the number of electrons in each dynamic QD because of Coulomb energy. By comparing this dependence to a saddl… ▽ More We measure the electron escape-rate from surface-acoustic-wave dynamic quantum dots (QDs) through a tunnel barrier. Rate-equations are used to extract the tunnelling rates, which change by an order of magnitude with tunnel-barrier gate voltage. We find that the tunnelling rates depend on the number of electrons in each dynamic QD because of Coulomb energy. By comparing this dependence to a saddle-point-potential model, the addition energies of the second and third electron in each dynamic QD are estimated. The scale (a few meV) is comparable to those in static QDs as expected. △ Less

Submitted 28 August, 2007; originally announced August 2007.

Comments: Accepted for publication in Physical Review Letters

Geometric Suppression of Single-Particle Energy Spacings in Quantum Antidots

Authors: L. C. Bassett, C. P. Michael, C. J. B. Ford, M. Kataoka, C. H. W. Barnes, M. Y. Simmons, D. A. Ritchie

Abstract: Quantum Antidot (AD) structures have remarkable properties in the integer quantum Hall regime, exhibiting Coulomb-blockade charging and the Kondo effect despite their open geometry. In some regimes a simple single-particle (SP) model suffices to describe experimental observations while in others interaction effects are clearly important, although exactly how and why interactions emerge is unclea… ▽ More Quantum Antidot (AD) structures have remarkable properties in the integer quantum Hall regime, exhibiting Coulomb-blockade charging and the Kondo effect despite their open geometry. In some regimes a simple single-particle (SP) model suffices to describe experimental observations while in others interaction effects are clearly important, although exactly how and why interactions emerge is unclear. We present a combination of experimental data and the results of new calculations concerning SP orbital states which show how the observed suppression of the energy spacing between states can be explained through a full consideration of the AD potential, without requiring any effects due to electron interactions such as the formation of compressible regions composed of multiple states, which may occur at higher magnetic fields. A full understanding of the regimes in which these effects occur is important for the design of devices to coherently manipulate electrons in edge states using AD resonances. △ Less

Submitted 9 July, 2007; originally announced July 2007.

Comments: 4 pages, 2 figures

Surface-acoustic-wave-driven luminescence from a lateral p-n junction

Authors: J. R. Gell, P. Atkinson, S. P. Bremner, F. Sfigakis, M. Kataoka, D. Anderson, G. A. C. Jones, C. H. W. Barnes, D. A. Ritchie, M. B. Ward, C. E. Norman, A. J. Shields

Abstract: The authors report surface-acoustic-wave-driven luminescence from a lateral p-n junction formed by molecular beam epitaxy regrowth of a modulation doped GaAs/AlGaAs quantum well on a patterned GaAs substrate. Surface-acoustic-wave-driven transport is demonstrated by peaks in the electrical current and light emission from the GaAs quantum well at the resonant frequency of the transducer. This typ… ▽ More The authors report surface-acoustic-wave-driven luminescence from a lateral p-n junction formed by molecular beam epitaxy regrowth of a modulation doped GaAs/AlGaAs quantum well on a patterned GaAs substrate. Surface-acoustic-wave-driven transport is demonstrated by peaks in the electrical current and light emission from the GaAs quantum well at the resonant frequency of the transducer. This type of junction offers high carrier mobility and scalability. The demonstration of surface-acoustic-wave luminescence is a significant step towards single-photon applications in quantum computation and quantum cryptography. △ Less

Submitted 28 January, 2007; originally announced January 2007.

Comments: 4 pages, 3 figures

Journal ref: Applied Physics Letters 89, 243505 (2006)

A numerical investigation of a piezoelectric surface acoustic wave interaction with a one-dimensional channel

Authors: S. Rahman, M. Kataoka, C. H. W. Barnes, H. P. Langtangen

Abstract: We investigate the propagation of a piezoelectric surface acoustic wave (SAW) across a GaAs/Al$_X$Ga$_{1-X}$As heterostructure surface, on which there is fixed a metallic split-gate. Our method is based on a finite element formulation of the underlying equations of motion, and is performed in three-dimensions fully incorporating the geometry and material composition of the substrate and gates. W… ▽ More We investigate the propagation of a piezoelectric surface acoustic wave (SAW) across a GaAs/Al$_X$Ga$_{1-X}$As heterostructure surface, on which there is fixed a metallic split-gate. Our method is based on a finite element formulation of the underlying equations of motion, and is performed in three-dimensions fully incorporating the geometry and material composition of the substrate and gates. We demonstrate attenuation of the SAW amplitude as a result of the presence of both mechanical and electrical gates on the surface. We show that the incorporation of a simple model for the screening by the two-dimensional electron gas (2DEG), results in a total electric potential modulation that suggests a mechanism for the capture and release of electrons by the SAW. Our simulations suggest the absence of any significant turbulence in the SAW motion which could hamper the operation of SAW based quantum devices of a more complex geometry. △ Less

Submitted 7 May, 2006; v1 submitted 25 December, 2005; originally announced December 2005.

Comments: 8 pages, 8 figures

Journal ref: Phys. Rev. B 74 (2006)

Comment on "Absence of Compressible Edge Channel Rings in Quantum Antidots"

Authors: M. Kataoka, C. J. B. Ford

Abstract: In a recent article, Karakurt et al. [I. Karakurt et al., Phys. Rev. Lett. 89, 226803 (2002)] reported the absence of compressible regions around antidots in the quantum Hall regime. We wish to point out a significant flaw in their analysis, which invalidates their claim. In a recent article, Karakurt et al. [I. Karakurt et al., Phys. Rev. Lett. 89, 226803 (2002)] reported the absence of compressible regions around antidots in the quantum Hall regime. We wish to point out a significant flaw in their analysis, which invalidates their claim. △ Less

Submitted 20 April, 2004; originally announced April 2004.

Comments: 1 page 1 figure, to be published in Phys. Rev. Lett

Coulomb Blockade and Kondo Effect in a Quantum Hall Antidot

Authors: H. -S. Sim, M. Kataoka, Hangmo Yi, N. Y. Hwang, M. -S. Choi, S. -R. E. Yang

Abstract: We propose a general capacitive model for an antidot, which has two localized edge states with different spins in the quantum Hall regime. The capacitive coupling of localized excess charges, which are generated around the antidot due to magnetic flux quantization, and their effective spin fluctuation can result in Coulomb blockade, h/(2e) Aharonov-Bohm oscillations, and the Kondo effect. The re… ▽ More We propose a general capacitive model for an antidot, which has two localized edge states with different spins in the quantum Hall regime. The capacitive coupling of localized excess charges, which are generated around the antidot due to magnetic flux quantization, and their effective spin fluctuation can result in Coulomb blockade, h/(2e) Aharonov-Bohm oscillations, and the Kondo effect. The resultant conductance is in qualitative agreement with recent experimental data. △ Less

Submitted 5 November, 2003; v1 submitted 28 May, 2003; originally announced May 2003.

Comments: 3 figures, to appear in Physical Review Letters

Kondo Effect in a Quantum Antidot

Authors: M. Kataoka, C. J. B. Ford, M. Y. Simmons, D. A. Ritchie

Abstract: We report Kondo-like behaviour in a quantum antidot (a submicron depleted region in a two-dimensional electron gas) in the quantum-Hall regime. When both spin branches of the lowest Landau level encircle the antidot in a magnetic field ($\sim 1$ T), extra resonances occur between extended edge states via antidot bound states when tunnelling is Coulomb blockaded. These resonances appear only in a… ▽ More We report Kondo-like behaviour in a quantum antidot (a submicron depleted region in a two-dimensional electron gas) in the quantum-Hall regime. When both spin branches of the lowest Landau level encircle the antidot in a magnetic field ($\sim 1$ T), extra resonances occur between extended edge states via antidot bound states when tunnelling is Coulomb blockaded. These resonances appear only in alternating Coulomb-blockaded regions, and become suppressed when the temperature or source-drain bias is raised. Although the exact mechanism is unknown, we believe that Kondo-like correlated tunnelling arises from skyrmion-type edge reconstruction. This observation demonstrates the generality of the Kondo phenomenon. △ Less

Submitted 3 October, 2002; originally announced October 2002.

Comments: 9 pages, 3 figures (Fig.3 in colour), to appear in Phys. Rev. Lett

Coulomb blockade of tunnelling through compressible rings formed around an antidot: an explanation for $h/2e$ Aharonov-Bohm oscillations

Authors: M. Kataoka, C. J. B. Ford, G. Faini, D. Mailly, M. Y. Simmons, D. A. Ritchie

Abstract: We consider single-electron tunnelling through antidot states using a Coulomb-blockade model, and give an explanation for h/2e Aharonov-Bohm oscillations, which are observed experimentally when the two spins of the lowest Landau level form bound states. We show that the edge channels may contain compressible regions, and using simple electrostatics, that the resonance through the outer spin stat… ▽ More We consider single-electron tunnelling through antidot states using a Coulomb-blockade model, and give an explanation for h/2e Aharonov-Bohm oscillations, which are observed experimentally when the two spins of the lowest Landau level form bound states. We show that the edge channels may contain compressible regions, and using simple electrostatics, that the resonance through the outer spin states should occur twice per h/e period. An antidot may be a powerful tool for investigating quantum Hall edge states in general, and the interplay of spin and charging effects that occurs in quantum dots. △ Less

Submitted 25 July, 2000; originally announced July 2000.

Comments: 5 pages, 4 Postscript figures

Detection of Coulomb Charging around an Antidot

Authors: M. Kataoka, C. J. B. Ford, G. Faini, D. Mailly, M. Y. Simmons, D. R. Mace, C. -T. Liang, D. A. Ritchie

Abstract: We have detected oscillations of the charge around a potential hill (antidot) in a two-dimensional electron gas as a function of a perpendicular magnetic field B. The field confines electrons around the antidot in closed orbits, the areas of which are quantised through the Aharonov-Bohm effect. Increasing B reduces each state's area, pushing electrons closer to the centre, until enough charge bu… ▽ More We have detected oscillations of the charge around a potential hill (antidot) in a two-dimensional electron gas as a function of a perpendicular magnetic field B. The field confines electrons around the antidot in closed orbits, the areas of which are quantised through the Aharonov-Bohm effect. Increasing B reduces each state's area, pushing electrons closer to the centre, until enough charge builds up for an electron to tunnel out. This is a new form of the Coulomb blockade seen in electrostatically confined dots. We have also studied h/2e oscillations and found evidence for coupling of opposite spin states of the lowest Landau level. △ Less

Submitted 29 July, 1999; originally announced July 1999.

Comments: 3 pages, 3 Postscript figures, submitted to the proceedings of EP2DS-13

Detection of Coulomb Charging around an Antidot in the Quantum Hall Regime

Authors: M. Kataoka, C. J. B. Ford, G. Faini, D. Mailly, M. Y. Simmons, D. R. Mace, C. -T. Liang, D. A. Ritchie

Abstract: We have detected oscillations of the charge around a potential hill (antidot) in a two-dimensional electron gas as a function of a large magnetic field B. The field confines electrons around the antidot in closed orbits, the areas of which are quantised through the Aharonov-Bohm effect. Increasing B reduces each state's area, pushing electrons closer to the centre, until enough charge builds up… ▽ More We have detected oscillations of the charge around a potential hill (antidot) in a two-dimensional electron gas as a function of a large magnetic field B. The field confines electrons around the antidot in closed orbits, the areas of which are quantised through the Aharonov-Bohm effect. Increasing B reduces each state's area, pushing electrons closer to the centre, until enough charge builds up for an electron to tunnel out. This is a new form of the Coulomb blockade seen in electrostatically confined dots. Addition and excitation spectra in DC bias confirm the Coulomb blockade of tunnelling. △ Less

Submitted 29 July, 1999; originally announced July 1999.

Comments: 4 pages, 4 Postscript figures

Journal ref: Phys. Rev. Lett. 83, 160 (1999)