Showing 1–9 of 9 results for author: Kasian, O

Fully printed flexible perovskite solar modules with improved energy alignment by tin oxide surface modification

Authors: Lirong Dong, Shudi Qiu, Jose Garcia Cerrillo, Michael Wagner, Olga Kasian, Sarmad Feroze, Dongju Jang, Chaohui Li, Vincent M. Le Corre, Kaicheng Zhang, Heiko Peisert, Felix U Kosasih, Charline Arrive, Tian Du, Fu Yang, Christoph J. Brabec, Hans-Joachim Egelhaaf

Abstract: Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in ind… ▽ More Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in industrial production. Here, a fullerene-substituted alkylphosphonic acid dipole layer is introduced between the R2R-printed tin oxide electron transport layer and the perovskite active layer to reduce the energetic barrier and to suppress surface recombination at the buried interface. The resulting f-PSCs exhibit a PCE of 17.0% with negligible hysteresis, retain 95% of their initial PCE over 3000 bending cycles and achieve a T95 lifetime of 1200 h under 1 sun and 65 degreeC in nitrogen atmosphere. Moreover, the fully printed flexible perovskite solar mini-modules (f-PSMs) with a 20.25 cm2 aperture area achieve a PCE of 11.6%. The encapsulated f-PSMs retain 90% of their initial PCE after 500 h damp-heat testing at 65 degreeC and 85% relative humidity (ISOS-D3). This work marks an important progress toward the realization of efficient and stable flexible perovskite photovoltaics for commercialization. △ Less

Submitted 5 June, 2024; originally announced June 2024.

An integrated system built for small-molecule semiconductors via high-throughput approaches

Authors: Jianchang Wu, Jiyun Zhang, Manman Hu, Patrick Reiser, Luca Torresi, Pascal Friederich, Leopold Lahn, Olga Kasian, Dirk M. Guldi, M. Eugenia Pérez-Ojeda, Anastasia Barabash, Juan S. Rocha-Ortiz, Yicheng Zhao, Zhiqiang Xie, Junsheng Luo, Yunuo Wang, Sang Il Seok, Jens A. Hauch, Christoph J. Brabec

Abstract: High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarit… ▽ More High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarity, and crystallinity, which poses great challenges to solution processing and purification. Here, we first report an integrated system for the high-throughput synthesis, purification, and characterization of molecules with a large variety. Based on the principle of Like dissolves like, we combine theoretical calculations and a robotic platform to accelerate the purification of those molecules. With this platform, a material library containing 125 molecules and their optical-electric properties was built within a timeframe of weeks. More importantly, the high repeatability of recrystallization we design is a reliable approach to further upgrading and industrial production. △ Less

Submitted 13 May, 2023; originally announced May 2023.

Comments: 18 pages, 5 figures

Journal ref: J. Am. Chem. Soc. 2023, 145, 30, 1651-16525

Chemical Partitioning at Crystalline Defects in PtAu as a Pathway to Stabilize Electrocatalysts

Authors: Xuyang Zhou, Olga Kasian, Ting Luo, Se-Ho Kim, Chenyu Zhang, Siyuan Zhang, Subin Lee, Gregory B. Thompson, Gerhard Dehm, Baptiste Gault, Dierk Raabe

Abstract: Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We s… ▽ More Dissolution of electrocatalysts during long-term and dynamic operation is a challenging problem in energy conversion and storage devices such as fuel cells and electrolyzers. To develop stable electrocatalysts, we adopt the design concept of segregation engineering, which uses solute segregation prone to electrochemical dissolution at internal defects, i.e., grain boundaries and dislocations. We showcase the feasibility of this approach by stabilizing a model Pt catalyst with an addition of more noble Au (approximately 5 atomic percent). We characterized the defects' nanoscale structure and chemistry, and monitored the electrochemical dissolution of Pt and PtAu alloys by online inductively coupled plasma mass spectrometry. Once segregated to defects, Au atoms can stabilize and hence passivate the most vulnerable sites against electrochemical dissolution and improve the stability and longevity of the Pt electrocatalysts by more than an order of magnitude. This opens pathways to use solute segregation to defects for the development of more stable nanoscale electrocatalysts, a concept applicable for a wide range of catalytic systems. △ Less

Submitted 27 September, 2022; originally announced September 2022.

Correlating atom probe tomography with X-Ray and electron spectroscopies to understand microstructure-activity relationships in electrocatalysts

Authors: Baptiste Gault, Kevin Schweinar, Siyuan Zhang, Leopold Lahn, Christina Scheu, Se-Ho Kim, Olga Kasian

Abstract: The search for a new energy paradigm with net-zero carbon emissions requires new technologies for energy generation and storage that are at the crossroad between engineering, chemistry, physics, surface and materials sciences. To keep pushing the inherent boundaries of device performance and lifetime, we need to step away from a cook-and-look approach and aim to establish the scientific ground to… ▽ More The search for a new energy paradigm with net-zero carbon emissions requires new technologies for energy generation and storage that are at the crossroad between engineering, chemistry, physics, surface and materials sciences. To keep pushing the inherent boundaries of device performance and lifetime, we need to step away from a cook-and-look approach and aim to establish the scientific ground to guide the design of new materials. This requires strong efforts in establishing bridges between microscopy and spectroscopy techniques, across multiple scales. Here, we discuss how the complementarities of X-ray- and electron-based spectroscopies and atom probe tomography can be exploited in the study of surfaces and sub-surfaces to understand structure-property relationships in electrocatalysts. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Controlled do** of electrocatalysts through engineering impurities

Authors: Se-Ho Kim, Su-Hyun Yoo, Sangyong Shin, Ayman A. El-Zoka, Olga Kasian, Joohyun Lim, Jiwon Jeong, Christina Scheu, Joerg Neugebauer, Hyunjoo Lee, Mira Todorova, Baptiste Gault

Abstract: Fuel cells recombine water from H2 and O2 thereby powering e.g. cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation react… ▽ More Fuel cells recombine water from H2 and O2 thereby powering e.g. cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation reaction (HOR) hinders upscaling despite promising catalysts. Here, we observe an unexpected ingress of B into Pd nano-catalysts synthesised by wet-chemistry, gain control over this B-do**, and report on its influence on the HOR activity in alkaline conditions. We rationalize our findings using ab-initio calculations of both H- and OH-adsorption on B-doped Pd. Using this "impurity engineering" approach, we thus design Pt-free catalysts as required in electrochemical energy conversion devices, e.g. next generations of AEMFCs, that satisfy the economic and environmental constraints, i.e. reasonable operating costs and long-term stability, to enable the hydrogen economy. △ Less

Submitted 1 March, 2022; originally announced March 2022.

Different Photostability of BiVO4 in Near-pH-Neutral Electrolytes

Authors: Siyuan Zhang, Ibbi Ahmet, Se-Ho Kim, Olga Kasian, Andrea M. Mingers, Patrick Schnell, Moritz Kolbach, Joohyun Lim, Anna Fischer, Karl J. J. Mayrhofer, Serhiy Cherevko, Baptiste Gault, Roel van de Krol, Christina Scheu

Abstract: Photoelectrochemical water splitting is a promising route to produce hydrogen from solar energy. However, corrosion of semiconducting photoelectrodes remains a fundamental challenge for their practical application. The stability of BiVO4, one of the best performing photoanode materials, is systematically examined here using an illuminated scanning flow cell to measure its dissolution operando. The… ▽ More Photoelectrochemical water splitting is a promising route to produce hydrogen from solar energy. However, corrosion of semiconducting photoelectrodes remains a fundamental challenge for their practical application. The stability of BiVO4, one of the best performing photoanode materials, is systematically examined here using an illuminated scanning flow cell to measure its dissolution operando. The dissolution rates of BiVO4 under illumination depend on the electrolyte and decrease in the order: borate (pH=9.3) > phosphate (pH=7.2) > citrate (pH=7.0). BiVO4 exhibits an inherent lack of stability during the oxygen evolution reaction (OER), while hole-scavenging citrate electrolyte offers kinetic protection. The dissolution of Bi peaks at different potentials than the dissolution of V in phosphate buffer, whereas both ions dissolve simultaneously in borate buffer. The life cycle of a 90 nm BiVO4 film is monitored during one hour of light-driven OER in borate buffer. The photocurrent and dissolution rates show independent trends with time, highlighting the importance to measure both quantities operando. Dissolution rates are correlated to the surface morphology and chemistry characterized using electron microscopy, X-ray photoelectron spectroscopy and atom probe tomography. These correlative measurements further the understanding on corrosion processes of photoelectrodes down to the nanoscopic scale to facilitate their future developments. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Atomic scale map** of impurities in partially reduced hollow TiO2 nanowires

Authors: Joohyun Lim, Se-Ho Kim, Raquel Aymerich Armengol, Olga Kasian, Pyuck-Pa Choi, Leigh T. Stephenson, Baptiste Gault, Christina Scheu

Abstract: The incorporation of impurities during the chemical synthesis of nanomaterials is usually uncontrolled and rarely reported because of the formidable challenge that constitutes measuring trace amounts of often light elements with sub nanometre spatial resolution. Yet these foreign elements influence functional properties, by e.g. do**. Here we demonstrate how the synthesis and partial reduction r… ▽ More The incorporation of impurities during the chemical synthesis of nanomaterials is usually uncontrolled and rarely reported because of the formidable challenge that constitutes measuring trace amounts of often light elements with sub nanometre spatial resolution. Yet these foreign elements influence functional properties, by e.g. do**. Here we demonstrate how the synthesis and partial reduction reaction on hollow TiO2 nanowires leads to the introduction of parts-per-millions of boron, sodium, and nitrogen from the reduction reaction with sodium borohydride at the surface of the TiO2 nanowire. This do** explains the presence of oxygen vacancies at the surface that enhance the activity. Our results obtained on model metal-oxide nanomaterials shed light on the general process leading to the uncontrolled incorporation of trace impurities that can have a dramatic effect on their potential use in energy-harvesting applications. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Direct imaging of dopant and impurity distributions in 2D MoS$_2$

Authors: Se-Ho Kim, Joohyun Lim, Rajib Sahu, Olga Kasian, Leigh T. Stephenson, Christina Scheu, Baptiste Gault

Abstract: Molybdenum disulfide (MoS$_2$) nanosheet is a two-dimensional material with high electron mobility and with high potential for applications in catalysis and electronics. We synthesized MoS$_2$ nanosheets using a one-pot wet-chemical synthesis route with and without Re-do**. Atom probe tomography revealed that 3.8 at.% Re is homogeneously distributed within the Re-doped sheets. Other impurities a… ▽ More Molybdenum disulfide (MoS$_2$) nanosheet is a two-dimensional material with high electron mobility and with high potential for applications in catalysis and electronics. We synthesized MoS$_2$ nanosheets using a one-pot wet-chemical synthesis route with and without Re-do**. Atom probe tomography revealed that 3.8 at.% Re is homogeneously distributed within the Re-doped sheets. Other impurities are found also integrated within the material: light elements including C, N, O, and Na, locally enriched up to 0.1 at.%, as well as heavy elements such as V and W. Analysis of the non-doped sample reveals that the W and V likely originate from the Mo precursor. △ Less

Submitted 10 February, 2021; originally announced February 2021.

Solute hydrogen and deuterium observed at the near atomic scale in high-strength steel

Authors: Andrew J. Breen, Leigh T. Stephenson, Binhan Sun, Yujiao Li, Olga Kasian, Dierk Raabe, Michael Herbig, Baptiste Gault

Abstract: Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nano… ▽ More Observing solute hydrogen (H) in matter is a formidable challenge, yet, enabling quantitative imaging of H at the atomic-scale is critical to understand its deleterious influence on the mechanical strength of many metallic alloys that has resulted in many catastrophic failures of engineering parts and structures. Here, we report on the APT analysis of hydrogen (H) and deuterium (D) within the nanostructure of an ultra-high strength steel with high resistance to hydrogen embrittlement. Cold drawn, severely deformed pearlitic steel wires (Fe-0.98C-0.31Mn-0.20Si-0.20Cr-0.01Cu-0.006P-0.007S wt.%, ε=3.1) contains cementite decomposed during the pre-deformation of the alloy and ferrite. We find H and D within the decomposed cementite, and at some interfaces with the surrounding ferrite. To ascertain the origin of the H/D signal obtained in APT, we explored a series of experimental workflows including cryogenic specimen preparation and cryogenic-vacuum transfer from the preparation into a state-of-the-art atom probe. Our study points to the critical role of the preparation, i.e. the possible saturation of H-trap** sites during electrochemical polishing, how these can be alleviated by the use of an outgassing treatment, cryogenic preparation and transfer prior to charging. Accommodation of large amounts of H in the under-stoichiometric carbide likely explains the resistance of pearlite against hydrogen embrittlement. △ Less

Submitted 3 August, 2020; originally announced August 2020.