Showing 1–8 of 8 results for author: Kang, S H

Synergistic Energy Absorption Mechanisms of Architected Liquid Crystal Elastomers

Authors: Seung-Yeol Jeon, Beijun Shen, Nicholas A. Traugutt, Zeyu Zhu, Lichen Fang, Christopher M. Yakacki, Thao D. Nguyen, Sung Hoon Kang

Abstract: Here, we report the rate-dependent energy absorption behavior of a liquid crystal elastomer (LCE)-based architected material consisting of repeating unit cells of bistable tilted LCE beams sandwiched between stiff supports. Viscoelastic behaviors of the LCE material cause the energy absorption to increase with strain rate according to a power-law relationship, which can be modulated by changing th… ▽ More Here, we report the rate-dependent energy absorption behavior of a liquid crystal elastomer (LCE)-based architected material consisting of repeating unit cells of bistable tilted LCE beams sandwiched between stiff supports. Viscoelastic behaviors of the LCE material cause the energy absorption to increase with strain rate according to a power-law relationship, which can be modulated by changing the degree of mesogens alignment during synthesis. For a strain rate of 600 s-1, the unit cell structure shows up to a 5 MJ/m3 energy absorption density, which is two orders of magnitude higher than the same structure fabricated from Polydimethylsiloxane (PDMS), and is comparable to the dissipation from irreversible plastic deformation exhibited by denser metals. For a stacked structure of unit cells, viscoelasticity also produces nonuniform buckling of the LCE beams, causing the energy absorption density to increase with the stacking number n up to n=3. Varying the beam geometry further promotes the nonuniform buckling behavior allowing the energy absorption density to increase with stacking number without bounds. We envision that our study can lead to the development of lightweight extreme energy-absorbing materials. △ Less

Submitted 14 October, 2021; originally announced October 2021.

Reshaped Weyl fermionic dispersions driven by Coulomb interactions in MoTe2

Authors: Seoung-Hun Kang, Sangjun Jeon, Hyun-Jung Kim, Wonhee Ko, Suyeon Cho, Se Hwang Kang, Sung Wng Kim, Heejun Yang, Hyo Won Kim, Young-Woo Son

Abstract: We report the direct evidence of impacts of the Coulomb interaction in a prototypical Weyl semimetal, MoTe2, that alter its bare bands in a wide range of energy and momentum. Our quasiparticle interference patterns measured using scanning tunneling microscopy are shown to match the joint density of states of quasiparticle energy bands including momentum-dependent self-energy corrections, while ele… ▽ More We report the direct evidence of impacts of the Coulomb interaction in a prototypical Weyl semimetal, MoTe2, that alter its bare bands in a wide range of energy and momentum. Our quasiparticle interference patterns measured using scanning tunneling microscopy are shown to match the joint density of states of quasiparticle energy bands including momentum-dependent self-energy corrections, while electronic energy bands based on the other simpler local approximations of the Coulomb interaction fail to explain neither the correct number of quasiparticle pockets nor shape of their dispersions observed in our spectrum. With this, we predict a transition between type-I and type-II Weyl fermions with do** and resolve its disparate quantum oscillation experiments, thus highlighting the critical roles of Coulomb interactions in layered Weyl semimetals. △ Less

Submitted 13 October, 2021; v1 submitted 10 October, 2021; originally announced October 2021.

Journal ref: Phys. Rev. B 105, 045143 (2022)

Bioinspired Materials with Self-Adaptable Mechanical Properties

Authors: Santiago Orrego, Zhezhi Chen, Urszula Krekora, Decheng Hou, Seung-Yeol Jeon, Matthew Pittman, Carolina Montoya, Yun Chen, Sung Hoon Kang

Abstract: Natural structural materials, such as bone and wood, can autonomously adapt their mechanical properties in response to loading to prevent failure. They smartly control the addition of material in locations of high stress by utilizing locally available resources guided by biological signals. On the contrary, synthetic structural materials have unchanging mechanical properties limiting their mechani… ▽ More Natural structural materials, such as bone and wood, can autonomously adapt their mechanical properties in response to loading to prevent failure. They smartly control the addition of material in locations of high stress by utilizing locally available resources guided by biological signals. On the contrary, synthetic structural materials have unchanging mechanical properties limiting their mechanical performance and service life. Here, a material system that autonomously adapts its mechanical properties in response to mechanical loading is reported inspired by the mineralization process of bone. It is observed that charges from piezoelectric scaffolds can induce mineralization from media with mineral ions. The material system adapts to mechanical loading by inducing mineral deposition in proportion to the magnitude of the loading and the resulting piezoelectric charges. Moreover, the mechanism allows a simple one-step route for making graded materials by controlling stress distribution along the scaffold. The findings can pave the way for a new class of self-adaptive materials that reinforce the region of high stress or induce deposition of minerals on the damaged areas from the increase in stress to prevent/mitigate failure. They can also contribute to addressing the current challenges of synthetic materials for load-bearing applications from self-adaptive capabilities. △ Less

Submitted 12 December, 2019; originally announced December 2019.

Comments: under review in Advanced Materials

Switchable Organic Plasmonics with Conductive Polymer Nanoantennas

Authors: Shangzhi Chen, Evan S. H. Kang, Mina S. Chaharsoughi, Vallery Stanishev, Philipp Kühne, Hengda Sun, Vanya Darakchieva, Magnus P. Jonsson

Abstract: Metal nanostructures are key elements in nanooptics owing to their strong resonant interaction with light through local plasmonic charge oscillations. Their ability to shape light at the nanoscale have made them important across a multitude of areas, including biosensing, energy conversion and ultrathin flat metaoptics. Yet another dimension of avenues is foreseen for dynamic nanoantennas, ranging… ▽ More Metal nanostructures are key elements in nanooptics owing to their strong resonant interaction with light through local plasmonic charge oscillations. Their ability to shape light at the nanoscale have made them important across a multitude of areas, including biosensing, energy conversion and ultrathin flat metaoptics. Yet another dimension of avenues is foreseen for dynamic nanoantennas, ranging from tuneable metalenses for miniaturized medical devices to adaptable windows that control radiation flows in and out of buildings. However, enabling nano-optical antennas to be dynamically controllable remains highly challenging and particularly so for traditional metals with fixed permittivity. Here we present state-of-the-art conductive polymers as a new class of organic plasmonic materials for redox-tuneable nano-optics. Through experiments and simulations, we show that nanodisks of highly conductive polymers can provide clear optical extinction peaks via excitation of dipolar localised surface plasmon resonances. Resonance frequencies redshift with increasing nanodisk aspect ratio, in agreement with analytical calculations based on dipolar polarizability theory. We furthermore demonstrate complete switching of the optical response of the organic nanoantennas by chemical tuning of the polymer's redox state, which effectively modulates the material permittivity between plasmonic and non-plasmonic regimes. Our results thereby show that conductive polymer nanostructures can act as redox-tuneable plasmonic nanoantennas, based on bipolaronic charge carriers rather than electrons as in conventional metals. Future directions may investigate different polymers and geometries to further widen the plasmonic spectral range (here around 0.8 to 3.6 μm) as well as different ways of tuning. △ Less

Submitted 26 July, 2019; originally announced July 2019.

Symmetry dictated grain boundary state in a two-dimensional topological insulator

Authors: Hyo Won Kim, Seoung-Hun Kang, Hyun-Jung Kim, Kisung Chae, Suyeon Cho, Wonhee Ko, Se Hwang Kang, Heejun Yang, Sung Wng Kim, Seongjun Park, Sung Woo Hwang, Young-Kyun Kwon, Young-Woo Son

Abstract: Structural imperfections such as grain boundaries (GBs) and dislocations are ubiquitous in solids and have been of central importance in understanding nature of polycrystals. In addition to their classical roles, advent of topological insulators (TIs) offers a chance to realize distinct topological states bound to them. Although dislocation inside three-dimensional TIs is one of the prime candidat… ▽ More Structural imperfections such as grain boundaries (GBs) and dislocations are ubiquitous in solids and have been of central importance in understanding nature of polycrystals. In addition to their classical roles, advent of topological insulators (TIs) offers a chance to realize distinct topological states bound to them. Although dislocation inside three-dimensional TIs is one of the prime candidates to look for, its direct detection and characterization are challenging. Instead, in two-dimensional (2D) TIs, their creations and measurements are easier and, moreover, topological states at the GBs or dislocations intimately connect to their lattice symmetry. However, such roles of crystalline symmetries of GBs in 2D TIs have not been clearly measured yet. Here, we present the first direct evidence of a symmetry enforced Dirac type metallic state along a GB in 1T'-MoTe$_2$, a prototypical 2D TI. Using scanning tunneling microscope, we show a metallic state along a grain boundary with non-symmorphic lattice symmetry and its absence along the other boundary with symmorphic one. Our large scale atomistic simulations demonstrate hourglass like nodal-line semimetallic in-gap states for the former while the gap-opening for the latter, explaining our observation very well. The protected metallic state tightly linked to its crystal symmetry demonstrated here can be used to create stable metallic nanowire inside an insulator. △ Less

Submitted 5 July, 2019; v1 submitted 4 July, 2019; originally announced July 2019.

Journal ref: Nano Letters 20(8), 5837-5843 (2020)

Paramagnetic Fe_xTa_{1-x} alloys for engineering of perpendicularly magnetized tunnel junctions

Authors: Matthias Gottwald, Jimmy J. Kan, Kangho Lee, Seung H. Kang, Eric E. Fullerton

Abstract: Exchange coupling between two magnetic layers through an interlayer is of broad interest for numerous recent applications of nano-magnetic systems. In this Letter we study ferromagnetic exchange coupling through amorphous paramagnetic Fe-Ta alloys. We show that the exchange coupling depends exponentially on spacer thickness and scales with the Fe-Ta susceptibility, which can be tuned via the alloy… ▽ More Exchange coupling between two magnetic layers through an interlayer is of broad interest for numerous recent applications of nano-magnetic systems. In this Letter we study ferromagnetic exchange coupling through amorphous paramagnetic Fe-Ta alloys. We show that the exchange coupling depends exponentially on spacer thickness and scales with the Fe-Ta susceptibility, which can be tuned via the alloy composition and/or temperature. Such materials are of high interest for the engineering of perpendicularly magnetized CoFeB-MgO based tunnel junctions as it enables ferromagnetic coupling of magnetic layers with differing crystalline lattices, suppresses dead layers and can act as an inter-diffusion barrier during annealing. △ Less

Submitted 9 April, 2013; originally announced April 2013.

Stress- and temperature-dependent hysteresis in shear modulus of solid helium

Authors: D. Y. Kim, E. S. H. Kang, E. Kim, H. C. Kim

Abstract: The shear modulus of solid 4He below 200 mK exhibits an unusual increase, the characteristics of which show remarkable similarities to those of the period reduction in torsional oscillator experiments. We systematically studied the drive strain and temperature dependence of the shear modulus at low temperatures. The hysteretic behavior depends strongly on the drive and cooling history, which can b… ▽ More The shear modulus of solid 4He below 200 mK exhibits an unusual increase, the characteristics of which show remarkable similarities to those of the period reduction in torsional oscillator experiments. We systematically studied the drive strain and temperature dependence of the shear modulus at low temperatures. The hysteretic behavior depends strongly on the drive and cooling history, which can be associated with the thermally assisted Granato-Lucke dislocation theory. The phase diagram of the shear modulus is constructed on the basis of the emerging hysteretic behavior. △ Less

Submitted 15 January, 2013; originally announced January 2013.

Microscopic description of stress- and temperature-dependent shear modulus in solid 4He

Authors: Evan S. H. Kang, Hongkee Yoon, Eunseong Kim

Abstract: We developed a detailed microscopic method that describes the shear modulus anomaly of solid helium at low temperature. The shear modulus was calculated using the pinning length of dislocations determined in detail for both crossing network nodes and 3He impurities. The strong suppression of the shear modulus is reproduced well as the temperature or stress increases. The shear modulus at low tempe… ▽ More We developed a detailed microscopic method that describes the shear modulus anomaly of solid helium at low temperature. The shear modulus was calculated using the pinning length of dislocations determined in detail for both crossing network nodes and 3He impurities. The strong suppression of the shear modulus is reproduced well as the temperature or stress increases. The shear modulus at low temperatures depends strongly on how the state was prepared. All the key features in the stress hysteresis can be quantitatively explained in terms of the thermomechanical path-dependent pinning length of dislocation networks. △ Less

Submitted 26 November, 2012; originally announced November 2012.

Comments: Evan S. H. Kang and Hongkee Yoon contributed equally to this work