Showing 1–19 of 19 results for author: Kalaboukhov, A

Stoichiometric control of electron mobility and 2D superconductivity at LaAlO$_3$-SrTiO$_3$ interfaces

Authors: Gyanendra Singh, Roger Guzman, Guilhem Saïz, Wu Zhou, Jaume Gazquez, Jordi Fraxedas, Fereshteh Masoudinia, Dag Winkler, Tord Claeson, Nicolas Bergeal, Gervasi Herranz, Alexei Kalaboukhov

Abstract: SrTiO$_3$-based conducting interfaces, which exhibit coexistence of gate-tunable 2D superconductivity and strong Rashba spin-orbit coupling (RSOC), are candidates to host topological superconductive phases. Yet, superconductivity is usually in the dirty limit, which tends to suppress nonconventional pairing and therefore challenges these expectations. Here we report on LaAlO$_3$/SrTiO$_3$ (LAO/STO… ▽ More SrTiO$_3$-based conducting interfaces, which exhibit coexistence of gate-tunable 2D superconductivity and strong Rashba spin-orbit coupling (RSOC), are candidates to host topological superconductive phases. Yet, superconductivity is usually in the dirty limit, which tends to suppress nonconventional pairing and therefore challenges these expectations. Here we report on LaAlO$_3$/SrTiO$_3$ (LAO/STO) interfaces with remarkably large mobility and mean free paths comparable to the superconducting coherence length, approaching the clean limit for superconductivity. We further show that the carrier density, mobility, and formation of the superconducting condensate are controlled by the fine-tuning of La/Al chemical ratio in the LAO film. Interestingly, we find a region in the superconducting phase diagram where the critical temperature is not suppressed below the Lifshitz transition, at odds with previous experimental investigations. These findings point out the relevance of achieving a clean-limit regime to enhance the observation of unconventional pairing mechanisms in these systems △ Less

Submitted 25 January, 2024; originally announced January 2024.

Integration of High-Tc Superconductors with High Q Factor Oxide Mechanical Resonators

Authors: Nicola Manca, Alexei Kalaboukhov, Alejandro E. Plaza, Leonélio Cichetto Jr, Emilio Bellingeri, Francesco Bisio, Floriana Lombardi, Daniele Marré, Luca Pellegrino

Abstract: Micro-mechanical resonators are building blocks of a variety of applications in basic science and applied electronics. This device technology is mainly based on well-established and reproducible silicon-based fabrication processes with outstanding performances in term of mechanical Q factor and sensitivity to external perturbations. Broadening the functionalities of MEMS by the integration of func… ▽ More Micro-mechanical resonators are building blocks of a variety of applications in basic science and applied electronics. This device technology is mainly based on well-established and reproducible silicon-based fabrication processes with outstanding performances in term of mechanical Q factor and sensitivity to external perturbations. Broadening the functionalities of MEMS by the integration of functional materials is a key step for both applied and fundamental science. However, combining functional materials and silicon-based compounds is challenging. An alternative approach is fabricating MEMS based on complex heterostructures made of materials inherently showing a variety of physical properties such as transition metal oxides. Here, we report on the integration of a high-Tc superconductor YBa2Cu3O7 (YBCO) with high Q factor micro-bridge resonator made of a single-crystal LaAlO3 (LAO) thin film. LAO resonators are tensile strained, with a stress of 345 MPa, show Q factor in the range of tens of thousands, and have low roughness. The topmost YBCO layer deposited by Pulse Laser Deposition shows a superconducting transition starting at 90 K with zero resistance below 78 K. This result opens new possibilities towards the development of advanced transducers, such as bolometers or magnetic field detectors, as well as basic science experiments in solid state physics, material science, and quantum opto-mechanics. △ Less

Submitted 23 January, 2024; originally announced January 2024.

Comments: 5 pages, 4 figures

Strong in-plane magnetic anisotropy (Co0.15Fe0.85)5GeTe2/graphene van der Waals heterostructure spin-valve at room temperature

Authors: Roselle Ngaloy, Bing Zhao, Soheil Ershadrad, Rahul Gupta, Masoumeh Davoudiniya, Lakhan Bainsla, Lars Sjöström, Anamul M. Hoque, Alexei Kalaboukhov, Peter Svedlindh, Biplab Sanyal, Saroj P. Dash

Abstract: Van der Waals (vdW) magnets are promising owing to their tunable magnetic properties with do** or alloy composition, where the strength of magnetic interactions, their symmetry, and magnetic anisotropy can be tuned according to the desired application. However, most of the vdW magnet based spintronic devices are so far limited to cryogenic temperatures with magnetic anisotropies favouring out-of… ▽ More Van der Waals (vdW) magnets are promising owing to their tunable magnetic properties with do** or alloy composition, where the strength of magnetic interactions, their symmetry, and magnetic anisotropy can be tuned according to the desired application. However, most of the vdW magnet based spintronic devices are so far limited to cryogenic temperatures with magnetic anisotropies favouring out-of-plane or canted orientation of the magnetization. Here, we report room-temperature lateral spin-valve devices with strong in-plane magnetic anisotropy of the vdW ferromagnet (Co0.15Fe0.85)5GeTe2 (CFGT) in heterostructures with graphene. Magnetization measurements reveal above room-temperature ferromagnetism in CFGT with a strong in-plane magnetic anisotropy. Density functional theory calculations show that the magnitude of the anisotropy depends on the Co concentration and is caused by the substitution of Co in the outermost Fe layer. Heterostructures consisting of CFGT nanolayers and graphene were used to experimentally realize basic building blocks for spin valve devices such as efficient spin injection and detection. The spin transport and Hanle spin precession measurements prove a strong in-plane and negative spin polarization at the interface with graphene, which is supported by the calculated spin-polarized density of states of CFGT. The in-plane magnetization of CFGT at room temperature proves its usefulness in graphene lateral spin-valve devices, thus opening further opportunities for spintronic technologies. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Strain, Young's modulus, and structural transition of EuTiO3 thin films probed by micro-mechanical methods

Authors: Nicola Manca, Gaia Tarsi, Alexei Kalaboukhov, Francesco Bisio, Federico Caglieris, Floriana Lombardi, Daniele Marré, Luca Pellegrino

Abstract: EuTiO3 (ETO) is a well-known complex oxide mainly investigated for its magnetic properties and its incipient ferro-electricity. In this work, we demonstrate the realization of suspended micro-mechanical structures, such as cantilevers and micro-bridges, from 100 nm-thick single-crystal epitaxial ETO films deposited on top of SrTiO3(100) substrates. By combining profile analysis and resonance frequ… ▽ More EuTiO3 (ETO) is a well-known complex oxide mainly investigated for its magnetic properties and its incipient ferro-electricity. In this work, we demonstrate the realization of suspended micro-mechanical structures, such as cantilevers and micro-bridges, from 100 nm-thick single-crystal epitaxial ETO films deposited on top of SrTiO3(100) substrates. By combining profile analysis and resonance frequency measurements of these devices, we obtain the Young's modulus, strain, and strain gradients of the ETO thin films. Moreover, we investigate the ETO anti-ferro-distorsive transition by temperature-dependent characterizations, which show a non-monotonic and hysteretic mechanical response. Comparison between experimental and literature data allows us to weight the contribution from thermal expansion and softening to the tuning slope, while a full understanding of the origin of such a wide hysteresis is still missing. We also discuss the influence of oxygen vacancies on the reported mechanical properties by comparing stoichiometric and oxygen-deficient samples. △ Less

Submitted 6 October, 2023; v1 submitted 3 July, 2023; originally announced July 2023.

Comments: 8 pages, 5 figures; 7 Supplementary Material sections

Journal ref: APL Mater. 1 October 2023; 11 (10): 101107

Tuning the ground state of cuprate high-critical-temperature superconducting thin films by nanofaceted substrates

Authors: G. Mirarchi, R. Arpaia, E. Wahlberg, T. Bauch, A. Kalaboukhov, S. Caprara, C. Di Castro, M. Grilli, F. Lombardi, G. Seibold

Abstract: Anisotropic transport properties have been assessed in a number of cuprate superconductors, providing evidence for a nematic state. Here, we analyze recent experimental data for ultrathin YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) films, where nematicity is induced via strain engineering, leading to a suppression of charge density wave scattering along the orthorhombic a-axis and a concomitant enhancement of s… ▽ More Anisotropic transport properties have been assessed in a number of cuprate superconductors, providing evidence for a nematic state. Here, we analyze recent experimental data for ultrathin YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) films, where nematicity is induced via strain engineering, leading to a suppression of charge density wave scattering along the orthorhombic a-axis and a concomitant enhancement of strange metal behavior along the b-axis. It is shown that the anisotropic properties strongly depend on the substrate, which we characterize by atomic force microscopy (AFM). Based on the AFM data, we provide a microscopic model that can account for the absence (presence) of nematicity and the resulting transport properties in films grown on SrTiO$_3$ (MgO) substrates. △ Less

Submitted 21 June, 2023; originally announced June 2023.

Comments: 7 pages, 5 figures

Engineering underdoped CuO$_2$ nanoribbons in nm-thick $a$-axis YBa$_2$Cu$_3$O$_{7-δ}$ films

Authors: Riccardo Arpaia, Núria Alcalde-Herraiz, Andrea D'Alessio, Evgeny Stepantsov, Eric Wahlberg, Alexei Kalaboukhov, Thilo Bauch, Floriana Lombardi

Abstract: In underdoped cuprate high $T_{\mathrm{c}}$ superconductors, various local orders and symmetry breaking states, in addition to superconductivity, reside in the CuO$_2$ planes. The confinement of the CuO$_2$ planes can therefore play a fundamental role in modifying the hierarchy between the various orders and their intertwining with superconductivity. Here we present the growth of $a$-axis oriented… ▽ More In underdoped cuprate high $T_{\mathrm{c}}$ superconductors, various local orders and symmetry breaking states, in addition to superconductivity, reside in the CuO$_2$ planes. The confinement of the CuO$_2$ planes can therefore play a fundamental role in modifying the hierarchy between the various orders and their intertwining with superconductivity. Here we present the growth of $a$-axis oriented YBa$_2$Cu$_3$O$_{7-δ}$ films, spanning the whole underdoped side of the phase diagram. In these samples, the CuO$_2$ planes are confined by the film thickness, effectively forming unit-cell-thick nanoribbons. The unidirectional confinement at the nanoscale enhances the in-plane anisotropy of the films. By X-ray diffraction and resistance vs temperature measurements, we have discovered the suppression of the orthorhombic-to-tetragonal transition at low do**s, and a very high anisotropy of the normal state resistance in the $b$-$c$ plane, the latter being connected to a weak coupling between adjacent CuO$_2$ nanoribbons. These findings show that the samples we have grown represent a novel system, different from the bulk, where future experiments can possibly shed light on the rich and mysterious physics occurring within the CuO$_2$ planes. △ Less

Submitted 25 April, 2024; v1 submitted 10 July, 2022; originally announced July 2022.

Journal ref: Phys. Rev. Materials 8, 044803 (2024)

Do** dependence of the upper critical field in untwinned YBa$_2$Cu$_3$O$_{7-δ}$ thin films

Authors: E. Wahlberg, R. Arpaia, A. Kalaboukhov, T. Bauch, F. Lombardi

Abstract: We report on measurements of the do** dependence of the upper critical field $H_{c,2}$ in 50 nm thick YBa$_2$Cu$_3$O$_{7-δ}$ films. The films are untwinned and are characterized by a small in-plane compressive strain. We find that the $H_{c,2}$ shows a strong decrease in the underdoped region of the phase diagram, in agreement with what has been measured in relaxed single crystals. The origin of… ▽ More We report on measurements of the do** dependence of the upper critical field $H_{c,2}$ in 50 nm thick YBa$_2$Cu$_3$O$_{7-δ}$ films. The films are untwinned and are characterized by a small in-plane compressive strain. We find that the $H_{c,2}$ shows a strong decrease in the underdoped region of the phase diagram, in agreement with what has been measured in relaxed single crystals. The origin of the decrease of $H_{c,2}$ in the underdoped regime is discussed within a scenario where charge density wave order competes with superconductivity. This demonstrates the potential of using thin films for studying the phase diagram of high-$T_c$ materials under strain. △ Less

Submitted 29 June, 2022; originally announced June 2022.

Map** the phase diagram of a YBa$_2$Cu$_3$O$_{7-δ}$ nanowire through electromigration

Authors: Edoardo Trabaldo, Alexei Kalaboukhov, Riccardo Arpaia, Eric Wahlberg, Floriana Lombardi, Thilo Bauch

Abstract: We use electromigration (EM) to tune the oxygen content of YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) nanowi\-res. During EM, the dopant oxygen atoms in the nanowire are moved under the combined effect of electrostatic force and Joule heating. The EM current can be tuned to either deplete or replenish nanowires with oxygen, allowing fine tuning of its hole do** level. Electrical transport measurements and Ke… ▽ More We use electromigration (EM) to tune the oxygen content of YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) nanowi\-res. During EM, the dopant oxygen atoms in the nanowire are moved under the combined effect of electrostatic force and Joule heating. The EM current can be tuned to either deplete or replenish nanowires with oxygen, allowing fine tuning of its hole do** level. Electrical transport measurements and Kelvin probe microscopy corroborate good homogeneity of the do** level along the electromigrated nanowires. Thus, EM provides an effective method to study transport properties of YBCO in a wide do** range at the nanoscale in one and the same device. △ Less

Submitted 14 February, 2022; v1 submitted 28 May, 2021; originally announced May 2021.

Journal ref: Phys. Rev. Applied 17 (2022), 024021

Gate-tunable hallmarks of unconventional superconductivity in non-centrosymmetric nanowires

Authors: Gyanendra Singh, Claudio Guarcello, Edouard Lesne, Dag Winkler, Tord Claeson, Thilo Bauch, Floriana Lombardi, Andrea D. Caviglia, Roberta Citro, Mario Cuoco, Alexei Kalaboukhov

Abstract: Two dimensional SrTiO3-based interfaces stand out among non-centrosymmetric superconductors due to their intricate interplay of gate tunable Rashba spin-orbit coupling and multi-orbital electronic occupations, whose combination theoretically prefigures various forms of non-standard superconductivity. However, a convincing demonstration by phase sensitive measurements has been elusive so far. Here,… ▽ More Two dimensional SrTiO3-based interfaces stand out among non-centrosymmetric superconductors due to their intricate interplay of gate tunable Rashba spin-orbit coupling and multi-orbital electronic occupations, whose combination theoretically prefigures various forms of non-standard superconductivity. However, a convincing demonstration by phase sensitive measurements has been elusive so far. Here, by employing superconducting transport measurements in nano-devices we present clear-cut experimental evidences of unconventional superconductivity in the LaAlO3/SrTiO3 interface. The central observations are the substantial anomalous enhancement of the critical current by small magnetic fields applied perpendicularly to the plane of electron motion, and the asymmetric response with respect to the magnetic field direction. These features have a unique trend in intensity and sign upon electrostatic gating that, together with their dependence on temperature and nanowire dimensions, cannot be accommodated within a scenario of canonical spin-singlet superconductivity. We theoretically demonstrate that the hall-marks of the experimental observations unambiguously indicate a coexistence of Josephson channels with sign difference and intrinsic phase shift. The character of these findings establishes the occurrence of independent components of unconventional pairing in the superconducting state due to inversion symmetry breaking. The outcomes open new venues for the investigation of multi-orbital non-centrosymmetric superconductivity and Josephson-based devices for quantum technologies. △ Less

Submitted 1 April, 2021; originally announced April 2021.

Comments: 9 pages, 4 figures

Journal ref: npj Quantum Mater. 7, 2 (2022)

Magnetism and Ion Diffusion in Honeycomb Layered Oxide K$_2$Ni$_2$TeO$_6$: First Time Study by Muon Spin Rotation & Neutron Scattering

Authors: N. Matsubara, E. Nocerino, O. K. Forslund, A. Zubayer, K. Papadopoulos, D. Andreica, J. Sugiyama, R. Palm, Z. Guguchia, S. P. Cottrell, T. Kamiyama, T. Saito, A. Kalaboukhov, Y. Sassa, T. Masese, M. Månsson

Abstract: In the quest of finding novel and efficient batteries, a great interest has raised in K-based honeycomb layer oxide materials both for their fundamental properties and potential applications. A key issue in the realization of efficient batteries based on such compounds, is to understand the K-ion diffusion mechanism. However, investigation of potassium-ion (K$^+$) dynamics in materials using magne… ▽ More In the quest of finding novel and efficient batteries, a great interest has raised in K-based honeycomb layer oxide materials both for their fundamental properties and potential applications. A key issue in the realization of efficient batteries based on such compounds, is to understand the K-ion diffusion mechanism. However, investigation of potassium-ion (K$^+$) dynamics in materials using magneto-spin properties has so far been challenging, due to its inherently weak nuclear magnetic moment, in contrast to other alkali ions such as lithium and sodium. Spin-polarised muons, having a high gyromagnetic ratio, make the muon spin rotation and relaxation ($μ$+SR) technique ideal for probing ions dynamics in weak magneto-spin moment materials. Here we report the magnetic properties and K+ dynamics in honeycomb layered oxide material of the K$_2$Ni$_2$TeO$_6$ using $μ$+SR measurements. Our low-temperature $μ$+SR results together with, with complementary magnetic susceptibility, find an antiferromagnetic transition at 26 K. Further $μ$+SR studies performed at higher temperatures reveal that potassium ions (K$^+$) become mobile above 250 K and the activation energy for the diffusion process is Ea = 121(13) meV. This is the first time that K+ dynamics in potassium-based battery materials has been measured using $μ$+SR. Finally our results also indicate an interesting possibility that K-ion self diffusion occurs predominantly at the surface of the powder particles. This opens future possibilities for improving ion diffusion and device performance using nano-structuring. △ Less

Submitted 25 June, 2020; v1 submitted 12 March, 2020; originally announced March 2020.

Comments: 12 pages, 12 figures

Journal ref: Sci Rep 10, 18305 (2020)

Properties of Grooved Dayem Bridge based YBa$_2$Cu$_3$O$_{7-δ}$ Superconducting Quantum Interference Devices and Magnetometers

Authors: E. Trabaldo, S. Ruffieux, E. Andersson, R. Arpaia, D. Montemurro, J. F. Schneiderman, A. Kalaboukhov, D. Winkler, F. Lombardi, T. Bauch

Abstract: The transport properties of a YBa$_2$Cu$_3$O$_{7-δ}$ superconducting quantum interference device (SQUID) based on grooved Dayem bridge weak links are studied as a function of temperature: at high temperatures ($60~$K$<T<T_\mathrm{c}=89$~K) the weak links show properties similar to SNS junctions, while at temperatures below 60~K the weak links behave like short Dayem bridges. Using these devices, w… ▽ More The transport properties of a YBa$_2$Cu$_3$O$_{7-δ}$ superconducting quantum interference device (SQUID) based on grooved Dayem bridge weak links are studied as a function of temperature: at high temperatures ($60~$K$<T<T_\mathrm{c}=89$~K) the weak links show properties similar to SNS junctions, while at temperatures below 60~K the weak links behave like short Dayem bridges. Using these devices, we have fabricated SQUID magnetometers with galvanically coupled in-plane pick-up loops: at $T=77$~K, magnetic field white noise levels as low as $63$~fT/$\sqrt{\mathrm{Hz}}$ have been achieved. △ Less

Submitted 23 January, 2020; originally announced January 2020.

Journal ref: Appl. Phys. Lett. 116, 132601 (2020)

The role of kinetic inductance on the performance of YBCO SQUID magnetometers

Authors: S. Ruffieux, A. Kalaboukhov, M. Xie, M. Chukharkin, C. Pfeiffer, S. Sepehri, J. F. Schneiderman, D. Winkler

Abstract: Inductance is a key parameter when optimizing the performance of superconducting quantum interference device (SQUID) magnetometers made from the high temperature superconductor YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) because lower SQUID inductance $L$ leads to lower flux noise, but also weaker coupling to the pickup loop. In order to optimize the SQUID design, we combine inductance simulations and measureme… ▽ More Inductance is a key parameter when optimizing the performance of superconducting quantum interference device (SQUID) magnetometers made from the high temperature superconductor YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) because lower SQUID inductance $L$ leads to lower flux noise, but also weaker coupling to the pickup loop. In order to optimize the SQUID design, we combine inductance simulations and measurements to extract the different inductance contributions, and measure the dependence of the transfer function $V_Φ$ and flux noise $S_Φ^{1/2}$ on $L$. A comparison between two samples shows that the kinetic inductance contribution varies strongly with film quality, hence making inductance measurements a crucial part of the SQUID characterization. Thanks to the improved estimation of the kinetic inductance contribution, previously found discrepancies between theoretical estimates and measured values of $V_Φ$ and $S_Φ^{1/2}$ could to a large extent be avoided. We then use the measurements and improved theoretical estimations to optimize the SQUID geometry and reach a noise level of $S_B^{1/2}$ = 44 fT/$\sqrt{\textrm{Hz}}$ for the best SQUID magnetometer with a 8.6 mm $\times$ 9.2 mm directly coupled pickup loop. Lastly, we demonstrate a method for reliable one-time sensor calibration that is constant in a temperature range of several kelvin despite the presence of temperature dependent coupling contributions, such as the kinetic inductance. The found variability of the kinetic inductance contribution has implications not only for the design of YBCO SQUID magnetometers, but for all narrow linewidth SQUID-based devices operated close to their critical temperature. △ Less

Submitted 9 October, 2019; originally announced October 2019.

SQUID magnetometer based on Grooved Dayem nanobridges and a flux transformer

Authors: Edoardo Trabaldo, Christoph Pfeiffer, Eric Andersson, Riccardo Arpaia, Alexei Kalaboukhov, Dag Winkler, Floriana Lombardi, Thilo Bauch

Abstract: We report noise measurements performed on a SQUID magnetometer implementing Grooved Dayem nanobridge of YBCO as weak-links. The SQUID shows magnetic flux noise as low as 10 $μΦ_0$/Hz$^{0.5}$. The magnetometer is realized by coupling the SQUID to a flux transformer with a two-level coupling scheme using a flip-chip approach. This improves the effective area of the SQUID and result in a magnetic fie… ▽ More We report noise measurements performed on a SQUID magnetometer implementing Grooved Dayem nanobridge of YBCO as weak-links. The SQUID shows magnetic flux noise as low as 10 $μΦ_0$/Hz$^{0.5}$. The magnetometer is realized by coupling the SQUID to a flux transformer with a two-level coupling scheme using a flip-chip approach. This improves the effective area of the SQUID and result in a magnetic field noise of 50 fT/Hz$^{0.5}$ at T=77 K. △ Less

Submitted 26 August, 2019; originally announced August 2019.

Comments: 4 pages, 4 figures

Untwinned YBa$_2$Cu$_3$O$_{7-δ}$ thin films on MgO substrates: a platform to study strain effects on the local orders in cuprates

Authors: Riccardo Arpaia, Eric Andersson, Alexei Kalaboukhov, Elsebeth Schröder, Edoardo Trabaldo, Regina Ciancio, Goran Dražić, Pasquale Orgiani, Thilo Bauch, Floriana Lombardi

Abstract: We have grown untwinned YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films on (110) MgO substrates that were pre-annealed at high temperature in oxygen atmosphere. The annealing results in surface reconstruction with shallow facets, which induce the suppression of the YBCO twinning domains, and the preferential alignment of the CuO chains along one of the in-plane directions of the substrate. Because of the larg… ▽ More We have grown untwinned YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films on (110) MgO substrates that were pre-annealed at high temperature in oxygen atmosphere. The annealing results in surface reconstruction with shallow facets, which induce the suppression of the YBCO twinning domains, and the preferential alignment of the CuO chains along one of the in-plane directions of the substrate. Because of the large mismatch between the in-plane lattice parameters of film and substrate, the strain induced by the MgO into the YBCO layer is strong and very peculiar. The YBCO film is compressed, with respect to the bulk, and presents a unidirectional buckling of the atomic planes, along the chains' direction, due to a deformation of the copper-oxygen octahedra. The YBCO films, which can be grown with thicknesses down to few unit cells and oxygen do** levels spanning most of the superconducting dome, are patterned into nanowires with dimensions down to 50 nm. The anisotropies due to the untwinning state are preserved in these structures; moreover, additional anisotropies appear, in ultrathin structures where strain effects become more pronounced. Such untwinned and compressively strained films can therefore be used as a platform to study the interplay between strain and the various local orders in the normal state of YBCO. △ Less

Submitted 29 October, 2019; v1 submitted 7 August, 2019; originally announced August 2019.

Comments: 11 pages, 8 figures

Journal ref: Phys. Rev. Materials 3, 114804 (2019)

Grooved Dayem nanobridges as building blocks of high-performance YBa$_2$Cu$_3$O$_{7-δ}$ SQUID magnetometers

Authors: Edoardo Trabaldo, Christoph Pfeiffer, Eric Andersson, Riccardo Arpaia, Alexei Kalaboukhov, Dag Winkler, Floriana Lombardi, Thilo Bauch

Abstract: We present noise measurements performed on a YBa$_2$Cu$_3$O$_{7-δ}$ nanoscale weak-link-based magnetometer consisting of a Superconducting QUantum Interference Device (SQUID) galvanically coupled to a $3.5 \times 3.5~$mm$^2$ pick-up loop, reaching white flux noise levels and magnetic noise levels as low as $6~μΦ_0 / \sqrt{\mathrm{Hz}}$ and $100$~fT/$\sqrt{\mathrm{Hz}}$ at $T=77$~K, respectively. T… ▽ More We present noise measurements performed on a YBa$_2$Cu$_3$O$_{7-δ}$ nanoscale weak-link-based magnetometer consisting of a Superconducting QUantum Interference Device (SQUID) galvanically coupled to a $3.5 \times 3.5~$mm$^2$ pick-up loop, reaching white flux noise levels and magnetic noise levels as low as $6~μΦ_0 / \sqrt{\mathrm{Hz}}$ and $100$~fT/$\sqrt{\mathrm{Hz}}$ at $T=77$~K, respectively. The low noise is achieved by introducing Grooved Dayem Bridges (GDBs), a new concept of weak-link. A fabrication technique has been developed for the realization of nanoscale grooved bridges, which substitutes standard Dayem bridge weak links. The introduction of these novel key blocks reduces the parasitic inductance of the weak links and increases the differential resistance of the SQUIDs. This greatly improves the device performance, thus resulting in a reduction of the white noise. △ Less

Submitted 18 March, 2019; originally announced March 2019.

Journal ref: Nano Letter, 2019, 19 3, pp 1902 1907

Induced unconventional superconductivity on the surface states of Bi$_2$Te$_3$ topological insulator

Authors: Sophie Charpentier, Luca Galletti, Gunta Kunakova, Riccardo Arpaia, Yuxin Song, Reza Baghdadi, Shu Min Wang, Alexei Kalaboukhov, Eva Olsson, Francesco Tafuri, Dmitry Golubev, Jacob Linder, Thilo Bauch, Floriana Lombardi

Abstract: Topological superconductivity is central to a variety of novel phenomena involving the interplay between topologically ordered phases and broken-symmetry states. The key ingredient is an unconventional order parameter, with an orbital component containing a chiral $p_x$ + i$p_y$ wave term. Here we present phase-sensitive measurements, based on the quantum interference in nanoscale Josephson juncti… ▽ More Topological superconductivity is central to a variety of novel phenomena involving the interplay between topologically ordered phases and broken-symmetry states. The key ingredient is an unconventional order parameter, with an orbital component containing a chiral $p_x$ + i$p_y$ wave term. Here we present phase-sensitive measurements, based on the quantum interference in nanoscale Josephson junctions, realized by using Bi$_2$Te$_3$ topological insulator. We demonstrate that the induced superconductivity is unconventional and consistent with a sign-changing order parameter, such as a chiral $p_x$ + i$p_y$ component. The magnetic field pattern of the junctions shows a dip at zero externally applied magnetic field, which is an incontrovertible signature of the simultaneous existence of 0 and $π$ coupling within the junction, inherent to a non trivial order parameter phase. The nano-textured morphology of the Bi$_2$Te$_3$ flakes, and the dramatic role played by thermal strain are the surprising key factors for the display of an unconventional induced order parameter. △ Less

Submitted 5 May, 2018; originally announced May 2018.

Comments: 47 pages, 7 figures in the main text and 12 figures in the supplementary material

Journal ref: Nat. Commun. 8, 2019 (2017)

Infrared study of the quasi-two-dimensional electron system at the interface between SrTiO$_{3}$ and crystalline or amorphous LaAlO$_3$

Authors: A. Nucara, M. Corasaniti, A. Kalaboukhov, M. Ortolani, E. Falsetti, A. Sambri, F. Miletto Granozio, F. Capitani, J. -B. Brubach, P. Roy, U. Schade, P. Calvani

Abstract: We have used grazing-angle infrared spectroscopy to detect the Berreman effect (BE) in the quasi-two-dimensional electron system (q-2DES) which forms spontaneously at the interface between SrTiO$_{3}$ (STO) and a thin film of LaAlO$_3$ (LAO). From the BE, which allows one to study longitudinal optical excitations in ultrathin films like the q-2DES, we have extracted at different temperatures its t… ▽ More We have used grazing-angle infrared spectroscopy to detect the Berreman effect (BE) in the quasi-two-dimensional electron system (q-2DES) which forms spontaneously at the interface between SrTiO$_{3}$ (STO) and a thin film of LaAlO$_3$ (LAO). From the BE, which allows one to study longitudinal optical excitations in ultrathin films like the q-2DES, we have extracted at different temperatures its thickness, the charge density and mobility of the carriers under crystalline LAO (sample A), and the charge density under amorphous LAO (sample B). This quantity turns out to be higher than in sample A, but a comparison with Hall measurements shows that under amorphous LAO the charges are partly localized at low $T$ with a low activation energy (about 190 K in $k_B$ units), and are thermally activated according to a model for large polarons. The thickness of the q-2DES extracted from our spectra turns out to be 4 $\pm 1$ nm for crystalline LAO, 7 $\pm 2$ nm for amorphous LAO. △ Less

Submitted 22 February, 2018; originally announced February 2018.

Comments: 21 pages, 7 figures

Journal ref: Phys. Rev. B 97, 155126 (2018)

Quantum Resistance Standard Based on Epitaxial Graphene

Authors: Alexander Tzalenchuk, Samuel Lara-Avila, Alexei Kalaboukhov, Sara Paolillo, Mikael Syväjärvi, Rositza Yakimova, Olga Kazakova, T. J. B. M. Janssen, Vladimir Fal'ko, Sergey Kubatkin

Abstract: We report development of a quantum Hall resistance standard accurate to a few parts in a billion at 300 mK and based on large area epitaxial graphene. The remarkable precision constitutes an improvement of four orders of magnitude over the best results obtained in exfoliated graphene and is similar to the accuracy achieved in well-established semiconductor standards. Unlike the traditional resis… ▽ More We report development of a quantum Hall resistance standard accurate to a few parts in a billion at 300 mK and based on large area epitaxial graphene. The remarkable precision constitutes an improvement of four orders of magnitude over the best results obtained in exfoliated graphene and is similar to the accuracy achieved in well-established semiconductor standards. Unlike the traditional resistance standards the novel graphene device is still accurately quantized at 4.2 K, vastly simplifying practical metrology. This breakthrough was made possible by exceptional graphene quality achieved with scalable silicon carbide technology on a wafer scale and shows great promise for future large scale applications in electronics. △ Less

Submitted 7 September, 2009; originally announced September 2009.

Comments: Submitted

Journal ref: Nature Nanotechnology 5, 186 - 189 (2010)

SiC Graphene Suitable For Quantum Hall Resistance Metrology

Authors: Samuel Lara-Avila, Alexei Kalaboukhov, Sara Paolillo, Mikael Syväjärvi, Rositza Yakimova, Vladimir Fal'ko, Alexander Tzalenchuk, Sergey Kubatkin

Abstract: We report the first observation of the quantum Hall effect in epitaxial graphene. The result described in the submitted manuscript fills the yawning gap in the understanding of the electronic properties of this truly remarkable material and demonstrate suitability of the silicon carbide technology for manufactiring large area high quality graphene. Having found the quantum Hall effect in several… ▽ More We report the first observation of the quantum Hall effect in epitaxial graphene. The result described in the submitted manuscript fills the yawning gap in the understanding of the electronic properties of this truly remarkable material and demonstrate suitability of the silicon carbide technology for manufactiring large area high quality graphene. Having found the quantum Hall effect in several devices produced on distant parts of a single large-area wafer, we can confirm that material synthesized on the Si-terminated face of SiC promises a suitable platform for the implementations of quantum resistance metrology at elevated temperatures and, in the longer term, opens bright prospects for scalable electronics based on graphene. △ Less

Submitted 7 September, 2009; originally announced September 2009.

Comments: Submitted to Science Brevia 07 July 2009, rejected 10 July 2009 as more appropriate for a more specialized journal

Journal ref: arxiv:0909.1220 and Nature Nanotechnology 5, 186 - 189 (2010)