-
Search for inhomogeneous Meissner screening in Nb induced by low-temperature surface treatments
Authors:
Ryan M. L. McFadden,
Tobias Junginger
Abstract:
Empirical surface treatments, such as low-temperature baking (LTB) in a gaseous atmosphere or in vacuum, are important for the surface preparation of Nb superconducting radio frequency (SRF) cavities. These treatments inhomogeneously dope the first $\sim$50 nm of Nb's subsurface and are expected to impart depth-dependent characteristics to its Meissner response; however, direct evidence supporting…
▽ More
Empirical surface treatments, such as low-temperature baking (LTB) in a gaseous atmosphere or in vacuum, are important for the surface preparation of Nb superconducting radio frequency (SRF) cavities. These treatments inhomogeneously dope the first $\sim$50 nm of Nb's subsurface and are expected to impart depth-dependent characteristics to its Meissner response; however, direct evidence supporting this remains elusive, suggesting the effect is subtle. In this work, we revisit the Meissner profile data for several LTB treatments obtained from low-energy muon spin rotation (LE-$μ$SR) experiments [A. Romanenko et al., Appl. Phys. Lett. 104, 072601 (2014) and R. M. L. McFadden et al., Phys. Rev. Appl. 19, 044018 (2023)], and search for signatures of inhomogeneous field screening. Using a generalized London expression with a recently proposed empirical model for a depth-dependent magnetic penetration depth $λ(z)$, we obtain improved fits to the Meissner data, revealing that the presence of a non-superconducting surface "dead layer" $d \geq 25$ nm is a strong indicator of a reduced supercurrent density at shallow subsurface depths. Our analysis supports the notion that vacuum annealing at 120 $^{\circ}$C for 48 h induces a depth-dependent Meissner response, which has consequences for Nb's ability to maintain a magnetic-flux-free state. Evidence of similar behavior from a "nitrogen infusion" treatment is less compelling. Suggestions for further investigation into the matter are provided.
△ Less
Submitted 10 July, 2024; v1 submitted 23 May, 2024;
originally announced May 2024.
-
Depth-resolved Characterization of Meissner Screening Breakdown in Surface Treated Niobium
Authors:
Edward Thoeng,
Md. Asaduzzaman,
Philipp Kolb,
Ryan M. L. McFadden,
Gerald D. Morris,
John O. Ticknor,
Sarah R. Dunsiger,
Victoria L. Karner,
Derek Fujimoto,
Tobias Junginger,
Robert F. Kiefl,
W. Andrew MacFarlane,
Ruohong Li,
Suresh Saminathan,
Robert E. Laxdal
Abstract:
We report direct measurements of the magnetic field screening at the limits of the Meissner phase for two superconducting Nb samples. The samples are processed with two different surface treatments that have been developed for superconducting radio-frequency cavity applications -- a "baseline" treatment and an oxygen-do** ("O-do**") treatment. The measurements show: 1) that the screening lengt…
▽ More
We report direct measurements of the magnetic field screening at the limits of the Meissner phase for two superconducting Nb samples. The samples are processed with two different surface treatments that have been developed for superconducting radio-frequency cavity applications -- a "baseline" treatment and an oxygen-do** ("O-do**") treatment. The measurements show: 1) that the screening length is significantly longer in the "O-do**" sample compared to the "baseline" sample; 2) that the screening length near the limits of the Meissner phase increases with applied field; 3) the evolution of the screening profile as the material transitions from the Meissner phase to the mixed phase; and 4) a demonstration of the absence of any screening profile for the highest applied field, indicative of the full flux entering the sample. Measurements are performed utilizing the $β$-detected nuclear magnetic resonance ($β$-NMR) technique that allows depth resolved studies of the local magnetic field within the first 100 nm of the surface. The study takes advantage of the $β$-SRF beamline, a new facility at TRIUMF, Canada, where field levels up to 200 mT are available parallel to the sample surface to replicate radio frequency (RF) fields near the Meissner breakdown limits of Nb.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
Measurements of the first-flux-penetration field in surface-treated and coated Nb: Distinguishing between surface pinning and an interface energy barrier
Authors:
Md Asaduzzaman,
Ryan M. L. McFadden,
Edward Thoeng,
Robert E. Laxdal,
Tobias Junginger
Abstract:
We report measurements of the first-flux-penetration field in surface-treated and coated Nb samples using muon spin rotation ($μ$SR). Using thin Ag foils as energy moderators for the implanted muon spin-probes, we "profile" the vortex penetration field $μ_{0} H_{\mathrm{vp}}$ at sub-surface depths on the order of $\sim 10$ $\mathrmμ$m to $\sim 100$ $\mathrmμ$m. In a coated sample [Nb$_3$Sn(2…
▽ More
We report measurements of the first-flux-penetration field in surface-treated and coated Nb samples using muon spin rotation ($μ$SR). Using thin Ag foils as energy moderators for the implanted muon spin-probes, we "profile" the vortex penetration field $μ_{0} H_{\mathrm{vp}}$ at sub-surface depths on the order of $\sim 10$ $\mathrmμ$m to $\sim 100$ $\mathrmμ$m. In a coated sample [Nb$_3$Sn(2 $\mathrmμ$m)/Nb], we find that $μ_{0} H_{\mathrm{vp}}$ is depth-independent with a value of 234.5(35) mT, consistent with Nb's metastable superheating field and suggestive of surface energy barrier for flux penetration. Conversely, in a surface-treated sample [Nb baked in vacuum at 120 $^{\circ}$C for 48 h], vortex penetration onsets close to pure Nb's lower critical field $μ_{0}H_\mathrm{c1} \approx 170$ mT, but increases with increasing implantation depth, consistent with flux-pinning localized at the surface. The implication of these results for technical applications of superconducting Nb, such as superconducting radio frequency (SRF) cavities, is discussed.
△ Less
Submitted 23 May, 2024; v1 submitted 23 February, 2024;
originally announced February 2024.
-
Comment on "Strong Meissner screening change in superconducting radio frequency cavities due to mild baking" [Appl. Phys. Lett. 104, 072601 (2014)]
Authors:
Ryan M. L. McFadden,
Md Asaduzzaman,
Tobias Junginger
Abstract:
In a recent Letter by Romanenko et al., the authors used low-energy muon spin rotation (LE-$μ$SR) to measure the Meissner screening profile in cutouts from Nb superconducting radio frequency (SRF) cavities, systematically comparing how different surface treatments affect the screening properties of the elemental type-II superconductor. They reported a "strong" modification to the character of the…
▽ More
In a recent Letter by Romanenko et al., the authors used low-energy muon spin rotation (LE-$μ$SR) to measure the Meissner screening profile in cutouts from Nb superconducting radio frequency (SRF) cavities, systematically comparing how different surface treatments affect the screening properties of the elemental type-II superconductor. They reported a "strong" modification to the character of the screening profile upon mild baking at 120 $^{\circ}$C for 48 h, which was interpreted as a depth-dependent carrier mean-free-path resulting from a "gradient in vacancy concentration" near the surface. While this observation led to speculation that this surface treatment yields an "effective" superconducting bilayer, we suggest that its likeness to such is accidental and that the behavior is an artifact from the analysis.
△ Less
Submitted 6 September, 2023; v1 submitted 3 May, 2023;
originally announced May 2023.
-
Evidence for current suppression in superconductor-superconductor bilayers
Authors:
Md Asaduzzaman,
Ryan M. L. McFadden,
Anne-Marie Valente-Feliciano,
David R. Beverstock,
Andreas Suter,
Zaher Salman,
Thomas Prokscha,
Tobias Junginger
Abstract:
Superconducting radio frequency (SRF) cavities, which are critical components in many particle accelerators, need to be operated in the Meissner state to avoid strong dissipation from magnetic vortices. For a defect-free superconductor, the maximum attainable magnetic field for operation is set by the superheating field, $B_{\mathrm{sh}}$, which directly depends on the surface current. In heterost…
▽ More
Superconducting radio frequency (SRF) cavities, which are critical components in many particle accelerators, need to be operated in the Meissner state to avoid strong dissipation from magnetic vortices. For a defect-free superconductor, the maximum attainable magnetic field for operation is set by the superheating field, $B_{\mathrm{sh}}$, which directly depends on the surface current. In heterostructures composed of different superconductors, the current in each layer depends not only on the properties of the individual material, but also on the electromagnetic response of the adjacent layers through boundary conditions at the interfaces. Three prototypical bilayers [$\mathrm{Nb_{1-x}Ti_xN}$(50 nm)/Nb, $\mathrm{Nb_{1-x}Ti_xN}$(80 nm)/Nb, and $\mathrm{Nb_{1-x}Ti_xN}$(160 nm)/Nb] are investigated here by depth-resolved measurements of their Meissner screening profiles using low-energy muon spin rotation (LE-$μ$SR). From fits to a model based on London theory (with appropriate boundary and continuity conditions), a magnetic penetration depth for the thin $\mathrm{Nb_{1-x}Ti_xN}$ layers of $λ_\mathrm{Nb_{1-x}Ti_xN} =$ 182.5(31) nm is found, in good agreement with literature values for the bulk alloy. Using the measured $λ_\mathrm{Nb_{1-x}Ti_xN}$, the maximum vortex-free field, $B_{\mathrm{max}}$, of the superconductor-superconductor (SS) bilayer structure was estimated to be 610(40) mT. The strong suppression of the surface current in the $\mathrm{Nb_{1-x}Ti_xN}$ layer suggests an optimal thickness of $\sim 1.4 λ_{\mathrm{Nb_{1-x}Ti_xN}} =$ 261(14) nm.
△ Less
Submitted 28 August, 2023; v1 submitted 18 April, 2023;
originally announced April 2023.
-
Depth-resolved measurements of the Meissner screening profile in surface-treated Nb
Authors:
Ryan M. L. McFadden,
Md Asaduzzaman,
Thomas Prokscha,
Zaher Salman,
Andreas Suter,
Tobias Junginger
Abstract:
We report depth-resolved measurements of the Meissner screening profile in several surface-treated Nb samples using low-energy muon spin rotation (LE-$μ$SR). In these experiments, implanted positive muons, whose stop** depths below Nb's surface were adjusted between ~10 nm to ~150 nm, reveal the field distribution inside the superconducting element via their spin-precession (communicated through…
▽ More
We report depth-resolved measurements of the Meissner screening profile in several surface-treated Nb samples using low-energy muon spin rotation (LE-$μ$SR). In these experiments, implanted positive muons, whose stop** depths below Nb's surface were adjusted between ~10 nm to ~150 nm, reveal the field distribution inside the superconducting element via their spin-precession (communicated through their radioactive decay products). We compare how the field screening is modified by different surface treatments commonly employed to prepare superconducting radio frequency (SRF) cavities used in accelerator beamlines. In contrast to an earlier report [A. Romanenko et al., Appl. Phys. Lett. 104 072601 (2014)], we find no evidence for any "anomalous" modifications to the Meissner profiles, with all data being well-described by a London model. Differences in screening properties between surface treatments can be explained by changes to the carrier mean-free-paths resulting from dopant profiles near the material's surface.
△ Less
Submitted 21 December, 2022;
originally announced December 2022.
-
Depth-resolved measurement of the Meissner screening profile in a niobium thin film from spin-lattice relaxation of the implanted $β$-emitter $^{8}$Li
Authors:
Ryan M. L. McFadden,
Md Asaduzzaman,
Terry J. Buck,
David L. Cortie,
Martin H. Dehn,
Sarah R. Dunsiger,
Robert F. Kiefl,
Robert E. Laxdal,
C. D. Philip Levy,
W. Andrew MacFarlane,
Gerald D. Morris,
Matthew R. Pearson,
Edward Thoeng,
Tobias Junginger
Abstract:
We report measurements of the Meissner screening profile in a Nb(300 nm)/Al$_{2}$O$_{3}$ thin film using $^{8}$Li $β$-detected nuclear magnetic resonance ($β$-NMR). The NMR probe $^{8}$Li was ion-implanted into the Nb film at energies $\leq$ 20 keV, corresponding to mean stop** depths comparable to Nb's magnetic penetration depth $λ$. $^{8}$Li's strong dipole-dipole coupling with the host…
▽ More
We report measurements of the Meissner screening profile in a Nb(300 nm)/Al$_{2}$O$_{3}$ thin film using $^{8}$Li $β$-detected nuclear magnetic resonance ($β$-NMR). The NMR probe $^{8}$Li was ion-implanted into the Nb film at energies $\leq$ 20 keV, corresponding to mean stop** depths comparable to Nb's magnetic penetration depth $λ$. $^{8}$Li's strong dipole-dipole coupling with the host $^{93}$Nb nuclei provided a "cross-relaxation" channel that dominated in low magnetic fields, which conferred indirect sensitivity to the local magnetic field via the spin-lattice relaxation (SLR) rate $1/T_{1}$. From a fit of the $1/T_{1}$ data to a model accounting for its dependence on temperature, magnetic field, and $^{8}$Li$^{+}$ implantation energy, we obtained a magnetic penetration depth $λ_{0}$ = 51.5(22) nm, consistent with a relatively short carrier mean-free-path $\ell$ = 18.7(29) nm typical of similarly prepared Nb films. The results presented here constitute an important step towards using $^{8}$Li $β$-NMR to characterize bulk Nb samples with engineered surfaces, which are often used in the fabrication of particle accelerators.
△ Less
Submitted 3 October, 2023; v1 submitted 2 December, 2022;
originally announced December 2022.
-
A New High Parallel-Field Spectrometer at TRIUMF's $β$-NMR Facility
Authors:
Edward Thoeng,
Ryan M. L. McFadden,
Suresh Saminathan,
Gerald D. Morris,
Philipp Kolb,
Ben Matheson,
Md Asaduzzaman,
Richard Baartman,
Sarah R. Dunsiger,
Derek Fujimoto,
Tobias Junginger,
Victoria L. Karner,
Spencer Kiy,
Ruohong Li,
Monika Stachura,
John O. Ticknor,
Robert F. Kiefl,
W. Andrew MacFarlane,
Robert E. Laxdal
Abstract:
A new high field spectrometer has been built to extend the capabilities of the $β$-detected nuclear magnetic resonance ($β$-NMR) facility at TRIUMF. This new beamline extension allows $β$-NMR spectroscopy to be performed with fields up to 200 mT parallel to a sample's surface (perpendicular to the ion beam), allowing depth-resolved studies of local electromagnetic fields with spin polarized probes…
▽ More
A new high field spectrometer has been built to extend the capabilities of the $β$-detected nuclear magnetic resonance ($β$-NMR) facility at TRIUMF. This new beamline extension allows $β$-NMR spectroscopy to be performed with fields up to 200 mT parallel to a sample's surface (perpendicular to the ion beam), allowing depth-resolved studies of local electromagnetic fields with spin polarized probes at a much higher applied magnetic field than previously available in this configuration. The primary motivation and application is to allow studies of superconducting radio frequency (SRF) materials, close to the critical fields of Nb metal, which is extensively used to fabricate SRF cavities. The details of the design considerations and implementation of the ultra-high vacuum (UHV) system, ion optics, beam diagnostics are presented here. Commissioning of the beamline and spectrometer with radioactive ions are also reported here. Future capabilities and applications in other areas are also described.
△ Less
Submitted 30 November, 2022; v1 submitted 28 November, 2022;
originally announced November 2022.
-
Modelling dielectric loss in superconducting resonators: Evidence for interacting atomic two-level systems at the Nb/oxide interface
Authors:
N. Gorgichuk,
T. Junginger,
R. de Sousa
Abstract:
While several experiments claim that two-level system (TLS) defects in amorphous surfaces/interfaces are responsible for energy relaxation in superconducting resonators and qubits, none can provide quantitative explanation of their data in terms of the conventional noninteracting TLS model. Here a model that interpolates between the interacting and noninteracting TLS loss tangent is proposed to pe…
▽ More
While several experiments claim that two-level system (TLS) defects in amorphous surfaces/interfaces are responsible for energy relaxation in superconducting resonators and qubits, none can provide quantitative explanation of their data in terms of the conventional noninteracting TLS model. Here a model that interpolates between the interacting and noninteracting TLS loss tangent is proposed to perform numerical analysis of experimental data and extract information about TLS parameters and their distribution. As a proof of principle, the model is applied to TESLA cavities that contain only a single lossy material in their interior, the niobium/niobium oxide interface. The best fits show interacting TLSs with a sharp modulus of electric dipole moment for both thin (5 nm) and thick (100 nm) oxides, indicating that the TLSs are "atomic" instead of "glassy". The proposed method can be applied to other devices with multiple material interfaces and substrates, with the goal of elucidating the nature of TLSs causing energy loss in resonators and qubits.
△ Less
Submitted 29 October, 2022; v1 submitted 9 March, 2022;
originally announced March 2022.
-
High Frequency Nonlinear Response of Superconducting Cavity-Grade Nb surfaces
Authors:
Bakhrom Oripov,
Thomas Bieler,
Gianluigi Ciovati,
Sergio Calatroni,
Pashupati Dhakal,
Tobias Junginger,
Oleg B. Malyshev,
Giovanni Terenziani,
Anne-Marie Valente-Feliciano,
Reza Valizadeh,
Stuart Wilde,
Steven M. Anlage
Abstract:
Nb Superconducting Radio-Frequency (SRF) cavities are observed to break down and lose their high-Q superconducting properties at accelerating gradients below the limits imposed by theory. The microscopic origins of SRF cavity breakdown are still a matter of some debate. To investigate these microscopic issues temperature and power dependent local third harmonic response was measured on bulk Nb and…
▽ More
Nb Superconducting Radio-Frequency (SRF) cavities are observed to break down and lose their high-Q superconducting properties at accelerating gradients below the limits imposed by theory. The microscopic origins of SRF cavity breakdown are still a matter of some debate. To investigate these microscopic issues temperature and power dependent local third harmonic response was measured on bulk Nb and Nb thin film samples using a novel near-field magnetic microwave microscope between 2.9K-10K and 2GHz-6GHz. Both periodic and non-periodic response as a function of applied RF field amplitude are observed. We attribute these features to extrinsic and intrinsic nonlinear responses of the sample. The RF-current-biased Resistively Shunted Junction (RSJ) model can account for the periodic response and fits very well to the data using reasonable parameters. The non-periodic response is consistent with vortex semi-loops penetrating into the bulk of the sample once sufficiently high RF magnetic field is applied, and the data can be fit to a Time-Dependent Ginzburg-Landau (TDGL) model of this process. The fact that these responses are measured on a wide variety of Nb samples suggests that we have captured the generic nonlinear response of air-exposed Nb surfaces.
△ Less
Submitted 13 June, 2019; v1 submitted 15 April, 2019;
originally announced April 2019.
-
Superheating in coated niobium
Authors:
T. Junginger,
W. Wasserman,
R. E. Laxdal
Abstract:
Using muon spin rotation it is shown that the field of first flux penetration H_entry in Nb is enhanced by about 30% if coated with an overlayer of Nb_3Sn or MgB_2. This is consistent with an increase from the lower critical magnetic field H_c1 up to the superheating field H_sh of the Nb substrate. In the experiments presented here coatings of Nb_3Sn and MgB_2 with a thickness between 50 and 2000n…
▽ More
Using muon spin rotation it is shown that the field of first flux penetration H_entry in Nb is enhanced by about 30% if coated with an overlayer of Nb_3Sn or MgB_2. This is consistent with an increase from the lower critical magnetic field H_c1 up to the superheating field H_sh of the Nb substrate. In the experiments presented here coatings of Nb_3Sn and MgB_2 with a thickness between 50 and 2000nm have been tested. H_entry does not depend on material or thickness. This suggests that the energy barrier at the boundary between the two materials prevents flux entry up to H_sh of the substrate. A mechanism consistent with these findings is that the proximity effect recovers the stability of the energy barrier for flux penetration, which is suppressed by defects for uncoated samples. Additionally, a low temperature baked Nb sample has been tested. Here a 6% increase of H_entry was found, also pushing H_entry beyond H_c1.
△ Less
Submitted 23 November, 2017; v1 submitted 17 May, 2017;
originally announced May 2017.
-
Field of first flux entry and pinning strength of superconductors for RF application measured with muon spin rotation
Authors:
T. Junginger,
S. H. Abidi,
R. Astley,
T. Buck,
M. Dehn,
S. Gheidi,
R. Kiefl,
P. Kolb,
D. Storey,
E. Thoeng,
W. Wasserman,
R. E Laxdal
Abstract:
The performance of superconducting radiofrequency (SRF) cavities used for particle accelerators depends on two characteristic material parameters: field of first flux entry $H_{entry}$ and pinning strength. The former sets the limit for the maximum achievable accelerating gradient, while the latter determines how efficiently flux can be expelled related to the maximum achievable quality factor. In…
▽ More
The performance of superconducting radiofrequency (SRF) cavities used for particle accelerators depends on two characteristic material parameters: field of first flux entry $H_{entry}$ and pinning strength. The former sets the limit for the maximum achievable accelerating gradient, while the latter determines how efficiently flux can be expelled related to the maximum achievable quality factor. In this paper, a method based on muon spin rotation ($μ$SR) is developed to probe these parameters on samples. It combines measurements from two different spectrometers, one being specifically built for these studies and samples of different geometries. It is found that annealing at 1400°C virtually eliminates all pinning. Such an annealed substrate is ideally suited to measure $H_{entry}$ of layered superconductors, which might enable accelerating gradients beyond bulk niobium technology.
△ Less
Submitted 4 December, 2017; v1 submitted 15 May, 2017;
originally announced May 2017.
-
A low energy muon spin rotation and point contact tunneling study of niobium films prepared for superconducting cavities
Authors:
T. Junginger,
S. Calatroni,
A. Sublet,
G. Terenziani,
T. Prokscha,
Z. Salman,
T. Proslier,
J. Zasadzinski
Abstract:
Point contact tunneling (PCT) and low energy muon spin rotation (LE-muSR) are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different sputtereing techniques: diode, dc magnetron (dcMS) and HIPIMS. The combined results are compared to radio-frequency tests performances of RF cavities made with the…
▽ More
Point contact tunneling (PCT) and low energy muon spin rotation (LE-muSR) are used to probe, on the same samples, the surface superconducting properties of micrometer thick niobium films deposited onto copper substrates using different sputtereing techniques: diode, dc magnetron (dcMS) and HIPIMS. The combined results are compared to radio-frequency tests performances of RF cavities made with the same processes. Degraded surface superconducting properties are found to yield lower quality factors and stronger Q slope. In addition, both techniques find evidence for surface paramagnetism on all samples and particularly on Nb films prepared by HIPIMS.
△ Less
Submitted 23 November, 2017; v1 submitted 24 March, 2017;
originally announced March 2017.
-
Experimental evidence for electric surface resistance in niobium
Authors:
Tobias Junginger,
Sarah Aull,
Wolfgang Weingarten,
Carsten P. Welsch
Abstract:
Identifying the loss mechanisms of niobium cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate current limitations. For several cavities an increasing surface resistance above a threshold field, saturating at higher field has been observed. Measurements on samples give evidence that this effect is caused by t…
▽ More
Identifying the loss mechanisms of niobium cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate current limitations. For several cavities an increasing surface resistance above a threshold field, saturating at higher field has been observed. Measurements on samples give evidence that this effect is caused by the surface electric field. The measured temperature and frequency dependence is consistent with a model that accounts for these losses by interface tunnel exchange between localized states in oxides formed along grain boundaries and the adjacent superconductor.
△ Less
Submitted 23 November, 2017; v1 submitted 12 February, 2013;
originally announced February 2013.
-
Losses in superconducting Niobium Films caused by Interface Tunnel Exchange
Authors:
Tobias Junginger,
Wolfgang Weingarten,
Carsten Welsch
Abstract:
Identifying the loss mechanisms of niobium film cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate their limitations. Measurements on samples show that the electric field is a dominant loss mechanism for niobium films, acting through interface tunneling between localized states in surface oxides and delocali…
▽ More
Identifying the loss mechanisms of niobium film cavities enables an accurate determination of applications for future accelerator projects and points to research topics required to mitigate their limitations. Measurements on samples show that the electric field is a dominant loss mechanism for niobium films, acting through interface tunneling between localized states in surface oxides and delocalized states in the superconducting niobium.
△ Less
Submitted 14 February, 2013; v1 submitted 10 April, 2012;
originally announced April 2012.
-
Extension of the Measurement Capabilities of the Quadrupole Resonator
Authors:
Tobias Junginger,
Wolfgang Weingarten,
Carsten Welsch
Abstract:
The Quadrupole Resonator, designed to measure the surface resistance of superconducting samples at 400 MHz has been refurbished. The accuracy of its RF-DC compensation measurement technique is tested by an independent method. It is shown that the device enables also measurements at 800 and 1200 MHz and is capable to probe the critical RF magnetic field. The electric and magnetic field configuratio…
▽ More
The Quadrupole Resonator, designed to measure the surface resistance of superconducting samples at 400 MHz has been refurbished. The accuracy of its RF-DC compensation measurement technique is tested by an independent method. It is shown that the device enables also measurements at 800 and 1200 MHz and is capable to probe the critical RF magnetic field. The electric and magnetic field configuration of the Quadrupole Resonator are dependent on the excited mode. It is shown how this can be used to distinguish between electric and magnetic losses.
△ Less
Submitted 4 April, 2012;
originally announced April 2012.
