Showing 1–50 of 71 results for author: Jung, Y

Emergent Atomic Scale Polarization Vortices

Authors: Boyang Zhao, Gwan Yeong Jung, Huandong Chen, Shantanu Singh, Zhengyu Du, Claire Wu, Guodong Ren, Qinai Zhao, Nicholas S. Settineri, Simon J. Teat, Haidan Wen, Rohan Mishra, Jayakanth Ravichandran

Abstract: Topological defects, such as vortices and skyrmions in magnetic and dipolar systems, can give rise to properties that are not observed in typical magnets or dielectrics. Here, we report the discovery of an atomic-scale dipolar vortex lattice in the charge-density-wave (CDW) phase of BaTiS3, a quasi-one-dimensional (quasi-1D) hexagonal chalcogenide, using X-ray synchrotron single-crystal diffractio… ▽ More Topological defects, such as vortices and skyrmions in magnetic and dipolar systems, can give rise to properties that are not observed in typical magnets or dielectrics. Here, we report the discovery of an atomic-scale dipolar vortex lattice in the charge-density-wave (CDW) phase of BaTiS3, a quasi-one-dimensional (quasi-1D) hexagonal chalcogenide, using X-ray synchrotron single-crystal diffraction studies. The vortex lattice consists of a periodic array of vortex-vortex-antivortex patterns composed of electric dipoles from off-center displacements of octahedrally coordinated Ti atoms. Using first-principles calculations and phenomenological modeling, we show that the dipolar vortex lattice in BaTiS3 arises from the coupling between multiple lattice instabilities arising from flat, soft phonon bands. This mechanism contrasts with classical dipolar textures in ferroelectric heterostructures that emerge from the competition between electrostatic and strain energies, and necessitate a dimensional reduction in the form of thin films and heterostructures to stabilize the textures. The observation of dipolar vortices in BaTiS3 brings the ultimate scaling limit for dipolar topologies down to about a nanometer and unveils the intimate connection between crystal symmetry and real-space topology. Our work sets up zero-filling triangular lattice materials with instabilities as a playground for realizing and understanding quantum polarization topologies. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Entanglement transition in rod packings

Authors: Yeonsu Jung, Thomas Plumb-Reyes, Hao-Yu Greg Lin, L. Mahadevan

Abstract: Random packings of stiff rods are self-supporting mechanical structures stabilized by long range interactions induced by contacts. To understand the geometrical and topological complexity of the packings, we deploy X-ray computerized tomography to unveil the structure of the packing. This allows us to define and directly visualize the spatial variations in the entanglement, a mesoscopic field that… ▽ More Random packings of stiff rods are self-supporting mechanical structures stabilized by long range interactions induced by contacts. To understand the geometrical and topological complexity of the packings, we deploy X-ray computerized tomography to unveil the structure of the packing. This allows us to define and directly visualize the spatial variations in the entanglement, a mesoscopic field that characterizes the local average crossing number, a measure of the topological complexity of the packing. We show that the entanglement field has information that is distinct from the density, orientational order, and contact distribution of the packing. We find that increasing the aspect ratio of the constituent rods in a packing leads to a proliferation of regions of strong entanglement that eventually percolate through the system, and this is correlated with a sharp transition in the mechanical response of the packing. We conclude with a tentative entanglement phase diagram for the mechanical response of dense rod packings that is likely relevant for a broad range of problems that goes beyond our specific study. △ Less

Submitted 29 November, 2023; v1 submitted 7 October, 2023; originally announced October 2023.

Hyperdiffusion of Poissonian run-and-tumble particles in two dimensions

Authors: Yurim Jung

Abstract: We study non-interacting Poissonian run-and-tumble particles (RTPs) in two dimensions whose velocity orientations are controlled by an arbitrary circular distribution $Q(φ)$. RTP-type active transport has been reported to undergo localization inside crowded and disordered environments, yet its non-equilibrium dynamics, especially at intermediate times, has not been elucidated analytically. Here, s… ▽ More We study non-interacting Poissonian run-and-tumble particles (RTPs) in two dimensions whose velocity orientations are controlled by an arbitrary circular distribution $Q(φ)$. RTP-type active transport has been reported to undergo localization inside crowded and disordered environments, yet its non-equilibrium dynamics, especially at intermediate times, has not been elucidated analytically. Here, starting from the standard (one-state) RTPs, we formulate the localized (two-state) RTPs by concatenating an overdamped Brownian motion in a Markovian manner. Using the space-time coupling technique in continuous-time random walk theory, we generalize the Montroll-Weiss formula in a decomposable form over the Fourier coefficient $Q_ν$ and reveal that the displacement moment $\left \langle \mathbf{r}^{2μ}(t) \right \rangle$ depends on finite angular moments $Q_ν$ for $|ν|\leq μ$. Based on this finding, we provide (i) the angular distribution of velocity reorientation for one-state RTPs and (ii) $\left \langle \mathbf{r}^{2}(t) \right \rangle$ over all timescales for two-state RTPs. In particular, we find the intricate time evolution of $\left \langle \mathbf{r}^{2}(t) \right \rangle$ that depends on initial dynamic states and, remarkably, detect hyperdiffusive scaling $\left \langle \mathbf{r}^{2}(t) \right \rangle \propto t^{β(t)}$ with an anomalous exponent $2<β(t)\leq 3$ in the short- and intermediate-time regimes. Our work suggests that the localization emerging within complex systems can increase the dispersion rate of active transport even beyond the ballistic limit. △ Less

Submitted 1 August, 2023; originally announced August 2023.

Wafer-scale fabrication of 2D nanostructures via thermomechanical nanomolding

Authors: Mehrdad T Kiani, Quynh P Sam, Yeon Sik Jung, Hyeuk ** Han, Judy J Cha

Abstract: With shrinking dimensions in integrated circuits, sensors, and functional devices, there is a pressing need to develop nanofabrication techniques with simultaneous control of morphology, microstructure, and material composition over wafer length scales. Current techniques are largely unable to meet all these conditions, suffering from poor control of morphology and defect structure or requiring ex… ▽ More With shrinking dimensions in integrated circuits, sensors, and functional devices, there is a pressing need to develop nanofabrication techniques with simultaneous control of morphology, microstructure, and material composition over wafer length scales. Current techniques are largely unable to meet all these conditions, suffering from poor control of morphology and defect structure or requiring extensive optimization or post-processing to achieve desired nanostructures. Recently, thermomechanical nanomolding (TMNM) has been shown to yield single-crystalline, high aspect ratio nanowires of metals, alloys, and intermetallics over wafer-scale distances. Here, we extend TMNM for wafer-scale fabrication of 2D nanostructures. Using Cu, we successfully nanomold Cu nanoribbons with widths < 50 nm, depths ~ 0.5-1 microns and lengths ~ 7 mm into Si trenches at conditions compatible with back end of line processing. Through SEM cross-section imaging and 4D-STEM grain orientation maps, we show that the grain size of the bulk feedstock is transferred to the nanomolded structures up to and including single crystal Cu. Based on the retained microstructures of molded 2D Cu, we discuss the deformation mechanism during molding for 2D TMNM. △ Less

Submitted 16 June, 2023; originally announced June 2023.

Comments: 4 figures

Metal halide thermoelectrics: prediction of high-performance CsCu2I3

Authors: Jong Woong Park, Young-Kwang Jung, Aron Walsh

Abstract: Thermoelectric devices can directly convert waste heat into electricity, which makes them an important clean energy technology. The underlying materials performance can be evaluated by the dimensionless figure of merit ZT. Metal halides are attractive candidates due to their chemical flexibility and ease of processing; however, the maximum ZT realized (ZT = 0.15) falls far below the level needed f… ▽ More Thermoelectric devices can directly convert waste heat into electricity, which makes them an important clean energy technology. The underlying materials performance can be evaluated by the dimensionless figure of merit ZT. Metal halides are attractive candidates due to their chemical flexibility and ease of processing; however, the maximum ZT realized (ZT = 0.15) falls far below the level needed for commercialization (ZT > 1). Using a first-principles procedure we assess the thermoelectric potential of copper halide CsCu2I3, which features 1D Cu-I connectivity. The n-type crystal is predicted to exhibit a maximum ZT of 2.2 at 600 K along the b-axis. The strong phonon anharmonicity of this system is shown by locally stable non-centrosymmetric Amm2 structures that are averaged to form the observed centrosymmetric Cmcm space group. Our work provides insights into the structure-property relations in metal halide thermoelectrics and suggests a path forward to engineer higher-performance heat-to-electricity conversion. △ Less

Submitted 19 May, 2023; originally announced May 2023.

Comments: 12 pages, 10 figures

Journal ref: PRX Energy 2, 043004 (2023)

Colossal optical anisotropy from atomic-scale modulations

Authors: Hongyan Mei, Guodong Ren, Boyang Zhao, Jad Salman, Gwan Yeong Jung, Huandong Chen, Shantanu Singh, Arashdeep S. Thind, John Cavin, Jordan A. Hachtel, Miaofang Chi, Shanyuan Niu, Graham Joe, Chenghao Wan, Nick Settineri, Simon J. Teat, Bryan C. Chakoumakos, Jayakanth Ravichandran, Rohan Mishra, Mikhail A. Kats

Abstract: In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface pol… ▽ More In modern optics, materials with large birefringence (Δn, where n is the refractive index) are sought after for polarization control (e.g. in wave plates, polarizing beam splitters, etc.), nonlinear optics and quantum optics (e.g. for phase matching and production of entangled photons), micromanipulation, and as a platform for unconventional light-matter coupling, such as Dyakonov-like surface polaritons and hyperbolic phonon polaritons. Layered "van der Waals" materials, with strong intra-layer bonding and weak inter-layer bonding, can feature some of the largest optical anisotropy; however, their use in most optical systems is limited because their optic axis is out of the plane of the layers and the layers are weakly attached, making the anisotropy hard to access. Here, we demonstrate that a bulk crystal with subtle periodic modulations in its structure -- Sr9/8TiS3 -- is transparent and positive-uniaxial, with extraordinary index n_e = 4.5 and ordinary index n_o = 2.4 in the mid- to far-infrared. The excess Sr, compared to stoichiometric SrTiS3, results in the formation of TiS6 trigonal-prismatic units that break the infinite chains of face-shared TiS6 octahedra in SrTiS3 into periodic blocks of five TiS6 octahedral units. The additional electrons introduced by the excess Sr subsequently occupy the TiS6 octahedral blocks to form highly oriented and polarizable electron clouds, which selectively boost the extraordinary index n_e and result in record birefringence (Δn > 2.1 with low loss). The connection between subtle structural modulations and large changes in refractive index suggests new categories of anisotropic materials and also tunable optical materials with large refractive-index modulation and low optical losses. △ Less

Submitted 21 July, 2023; v1 submitted 28 February, 2023; originally announced March 2023.

Comments: Main text + supplementary

Inhomogeneous Defect Distribution in Mixed-Polytype Metal Halide Perovskites

Authors: Young Won Woo, Zhenzhu Li, Young-Kwang Jung, Ji-Sang Park, Aron Walsh

Abstract: The competition between corner, edge and face-sharing octahedral networks is a cause of phase inhomogeneity in metal halide perovskite thin-films. Here we probe the charged iodine vacancy distribution and transport at the junction between cubic and hexagonal polytypes of CsPbI$_3$ from first-principles materials modelling. We predict a lower defect formation energy in the face-sharing regions, whi… ▽ More The competition between corner, edge and face-sharing octahedral networks is a cause of phase inhomogeneity in metal halide perovskite thin-films. Here we probe the charged iodine vacancy distribution and transport at the junction between cubic and hexagonal polytypes of CsPbI$_3$ from first-principles materials modelling. We predict a lower defect formation energy in the face-sharing regions, which correlates with a longer Pb$-$I bond length and causes a million-fold increase in local defect concentration. These defects are predicted to be more mobile in the face-sharing regions with a reduced activation energy for vacancy-mediated diffusion. We conclude that hexagonal phase inclusions or interfaces will act as defect sinks that could trap charges and enhance current-voltage hysteresis in perovskite-based solar cells and electrical devices. △ Less

Submitted 2 November, 2022; originally announced November 2022.

Atomic scale evolution of the surface chemistry in Li[Ni,Mn,Co]O2 cathode for Li-ion batteries stored in air

Authors: Mahander P. Singh, Se-Ho Kim, Xuyang Zhou, Hiram Kwak, Stoichko Antonov, Leonardo Shoji Aota, Chanwon Jung, Yoon Seok Jung, Baptiste Gault

Abstract: Layered LiMO2 (M = Ni, Co, Mn, and Al mixture) cathode materials used for Li-ion batteries are reputed to be highly reactive through their surface, where the chemistry changes rapidly when exposed to ambient air. However, conventional electron/spectroscopy-based techniques or thermogravimetric analysis fails to capture the underlying atom-scale chemistry of vulnerable Li species. To study the evol… ▽ More Layered LiMO2 (M = Ni, Co, Mn, and Al mixture) cathode materials used for Li-ion batteries are reputed to be highly reactive through their surface, where the chemistry changes rapidly when exposed to ambient air. However, conventional electron/spectroscopy-based techniques or thermogravimetric analysis fails to capture the underlying atom-scale chemistry of vulnerable Li species. To study the evolution of the surface composition at the atomic scale, here we use atom probe tomography and probed the surface species formed during exposure of a LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode material to air. The compositional analysis evidences the formation of Li2CO3. Site specific examination from a cracked region of an NMC811 particle also suggests the predominant presence of Li2CO3. These insights will help to design improved protocols for cathode synthesis and cell assembly, as well as critical knowledge for cathode degradation △ Less

Submitted 25 July, 2022; originally announced July 2022.

Unconventional Charge-density-wave Order in a Dilute d-band Semiconductor

Authors: Huandong Chen, Batyr Ilyas, Boyang Zhao, Emre Ergecen, Josh Mutch, Gwan Yeong Jung, Qian Song, Connor A. Occhialini, Guodong Ren, Sara Shabani, Eric Seewald, Shanyuan Niu, Jiangbin Wu, Nan Wang, Mythili Surendran, Shantanu Singh, Jiang Luo, Sanae Ohtomo, Gemma Goh, Bryan C. Chakoumakos, Simon J. Teat, Brent Melot, Han Wang, Di Xiao, Abhay N. Pasupathy , et al. (5 additional authors not shown)

Abstract: Electron-lattice coupling effects in low dimensional materials give rise to charge density wave (CDW) order and phase transitions. These phenomena are critical ingredients for superconductivity and predominantly occur in metallic model systems such as doped cuprates, transition metal dichalcogenides, and more recently, in Kagome lattice materials. However, CDW in semiconducting systems, specifical… ▽ More Electron-lattice coupling effects in low dimensional materials give rise to charge density wave (CDW) order and phase transitions. These phenomena are critical ingredients for superconductivity and predominantly occur in metallic model systems such as doped cuprates, transition metal dichalcogenides, and more recently, in Kagome lattice materials. However, CDW in semiconducting systems, specifically at the limit of low carrier concentration region, is uncommon. Here, we combine electrical transport, synchrotron X-ray diffraction and optical spectroscopy to discover CDW order in a quasi-one-dimensional (1D), dilute d-band semiconductor, BaTiS3, which suggests the existence of strong electron-phonon coupling. The CDW state further undergoes an unusual transition featuring a sharp increase in carrier mobility. Our work establishes BaTiS3 as a unique platform to study the CDW physics in the dilute filling limit to explore novel electronic phases. △ Less

Submitted 23 July, 2022; originally announced July 2022.

Journal ref: Adv. Mater. 2023, 2303283

Temperature induced change of conformation of Sc2TbN@C80 on h-BN/Ni(111)

Authors: R. Stania, A. P. Seitsonen, H. Y. Jung, D. Kunhardt, B. Buchner, A. A. Popov, M. Muntwiler, T. Greber

Abstract: The conformation of molecules on surfaces is decisive for their functionality. For the case of the endofullerene paramagnet Sc2TbN@C80 the conformation is linked to an electric and a magnetic dipole moment. Therefore a workfunction change of a substrate with adsorbed molecules, qualifies the system to be magnetoelectric. One monolayer of Sc2TbN@C80 has been studied on h-BN/Ni(111). The molecules a… ▽ More The conformation of molecules on surfaces is decisive for their functionality. For the case of the endofullerene paramagnet Sc2TbN@C80 the conformation is linked to an electric and a magnetic dipole moment. Therefore a workfunction change of a substrate with adsorbed molecules, qualifies the system to be magnetoelectric. One monolayer of Sc2TbN@C80 has been studied on h-BN/Ni(111). The molecules assume a hexagonally close packed lattice aligned with the substrate high symmetry directions. The structure is incommensurate and arranges at a periodicity of about 4.3x4.3 substrate unit cells. At low temperatures a (2 x 2) superstructure is observed. Angular resolved valence band photoemission spectroscopy shows a temperature induced 0.3 eV shift on the C80 molecular orbitals to lower binding energies that is parallel to a workfunction increase. From comparison of the molecular orbital angular photoemission intensity distributions it is conjectured that the molecules undergo a change in conformation between 30 and 300 K. This phase transition is centred at 125 K as observed with high resolution x-ray photoelectron spectroscopy that shows the core levels of the atomic species on the molecules to shift parallel to the workfunction. The temperature dependence of the workfunction can be described with a two level model that accounts for the disordering with an excitation energy of 60 meV into a highly degenerate ensemble. The experimental findings are backed by density functional theory calculations for the diamagnetic sibling of Sc2TbN@C80 : Sc2YN@C80 that rationalize the incommensurate structure, show a permanent dipole moment of Sc2YN@C80 and a relation between the workfunction and the orientation of the endohedral cluster. △ Less

Submitted 15 May, 2022; originally announced May 2022.

Comments: 7 pages 6 figures

Reaction-Path Statistical Mechanics of Enzymatic Kinetics

Authors: Hyuntae Lim, YounJoon Jung

Abstract: We introduce a reaction-path statistical mechanics formalism based on the principle of large deviations to quantify the kinetics of single-molecule enzymatic reaction processes under the Michaelis-Menten mechanism, which exemplifies an out-of-equilibrium process in the living system. Our theoretical approach begins with the principle of equal a priori probabilities and defines the reaction path en… ▽ More We introduce a reaction-path statistical mechanics formalism based on the principle of large deviations to quantify the kinetics of single-molecule enzymatic reaction processes under the Michaelis-Menten mechanism, which exemplifies an out-of-equilibrium process in the living system. Our theoretical approach begins with the principle of equal a priori probabilities and defines the reaction path entropy to construct a new nonequilibrium ensemble as a collection of possible chemical reaction paths. As a result, we evaluate a variety of path-based partition functions and free energies using the formalism of statistical mechanics. They allow us to calculate the timescales of a given enzymatic reaction, even in the absence of an explicit boundary condition that is necessary for the equilibrium ensemble. We also consider the large deviation theory under a closed-boundary condition of the fixed observation time to quantify the enzyme-substrate unbinding rates. The result demonstrates the presence of a phase-separation-like, bimodal behavior in unbinding events at a finite timescale, and the behavior vanishes as its rate function converges to a single phase in the long-time limit. △ Less

Submitted 8 April, 2022; originally announced April 2022.

Comments: 29 pages, 7 figures

Journal ref: J. Chem. Phys. 156, 134108 (2022)

Orientation Controlled Anisotropy in Single Crystals of Quasi-1D BaTiS3

Authors: Boyang Zhao, Md Shafkat Bin Hoque, Gwan Yeong Jung, Hongyan Mei, Shantanu Singh, Guodong Ren, Milena Milich, Qinai Zhao, Nan Wang, Huandong Chen, Shanyuan Niu, Sang-Jun Lee, Cheng-Tai Kuo, Jun-Sik Lee, John A. Tomko, Han Wang, Mikhail Kats, Rohan Mishra, Patrick E Hopkins, J. Ravichandran

Abstract: Low-dimensional materials with chain-like (one-dimensional) or layered (twodimensional) structures are of significant interest due to their anisotropic electrical, optical, thermal properties. One material with chain-like structure, BaTiS3 (BTS), was recently shown to possess giant in-plane optical anisotropy and glass-like thermal conductivity. To understand the origin of these effects, it is nec… ▽ More Low-dimensional materials with chain-like (one-dimensional) or layered (twodimensional) structures are of significant interest due to their anisotropic electrical, optical, thermal properties. One material with chain-like structure, BaTiS3 (BTS), was recently shown to possess giant in-plane optical anisotropy and glass-like thermal conductivity. To understand the origin of these effects, it is necessary to fully characterize the optical, thermal, and electronic anisotropy of BTS. To this end, BTS crystals with different orientations (aand c-axis orientations) were grown by chemical vapor transport. X-ray absorption spectroscopy (XAS) was used to characterize the local structure and electronic anisotropy of BTS. Fourier transform infrared (FTIR) reflection/transmission spectra show a large inplane optical anisotropy in the a-oriented crystals, while the c-axis oriented crystals were nearly isotropic in-plane. BTS platelet crystals are promising uniaxial materials for IR optics with their optic axis parallel to the c-axis. The thermal conductivity measurements revealed a thermal anisotropy of ~4.5 between the c- and a-axis. Time-domain Brillouin scattering showed that the longitudinal sound speed along the two axes is nearly the same suggesting that the thermal anisotropy is a result of different phonon scattering rates. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Active entanglement enables stochastic, topological gras**

Authors: Kaitlyn Becker, Clark Teeple, Nicholas Charles, Yeonsu Jung, Daniel Baum, James C. Weaver, L. Mahadevan, Robert Wood

Abstract: Gras**, in both biological and engineered mechanisms, can be highly sensitive to the gripper and object morphology, as well as perception, and motion planning. Here we circumvent the need for feedback or precise planning by using an array of fluidically-actuated slender hollow elastomeric filaments to actively entangle with objects that vary in geometric and topological complexity. The resulting… ▽ More Gras**, in both biological and engineered mechanisms, can be highly sensitive to the gripper and object morphology, as well as perception, and motion planning. Here we circumvent the need for feedback or precise planning by using an array of fluidically-actuated slender hollow elastomeric filaments to actively entangle with objects that vary in geometric and topological complexity. The resulting stochastic interactions enable a unique soft and conformable gras** strategy across a range of target objects that vary in size, weight, and shape. We experimentally evaluate the gras** performance of our strategy, and use a computational framework for the collective mechanics of flexible filaments in contact with complex objects to explain our findings. Overall, our study highlights how active collective entanglement of a filament array via an uncontrolled, spatially distributed scheme provides new options for soft, adaptable gras**. △ Less

Submitted 1 February, 2022; originally announced February 2022.

Universal Non-Volatile Resistive Switching Behavior in 2D Metal Dichalcogenides Featuring Unique Conductive-Point Random Access Memory Effect

Authors: Xiaohan Wu, Rui**g Ge, Yuqian Gu, Emmanuel Okogbue, Jian** Shi, Abhay Shivayogimath, Peter Bøggild, Timothy J. Booth, Yanfeng Zhang, Yeonwoong Jung, Jack C. Lee, Deji Akinwande

Abstract: Two-dimensional materials have been discovered to exhibit non-volatile resistive switching (NVRS) phenomenon. In our work, we reported the universal NVRS behavior in a dozen metal dichalcogenides, featuring low switching voltage, large on/off ratio, fast switching speed and forming free characteristics. A unique conductive-point random access memory (CPRAM) effect is used to explain the switching… ▽ More Two-dimensional materials have been discovered to exhibit non-volatile resistive switching (NVRS) phenomenon. In our work, we reported the universal NVRS behavior in a dozen metal dichalcogenides, featuring low switching voltage, large on/off ratio, fast switching speed and forming free characteristics. A unique conductive-point random access memory (CPRAM) effect is used to explain the switching mechanisms, supported by experimental results from current-sweep measurements. △ Less

Submitted 7 October, 2021; originally announced October 2021.

Comments: 3 pages, 5 figures, IEEE conference(2021 5th EDTM)

Journal ref: 2021 5th IEEE Electron Devices Technology & Manufacturing Conference (EDTM), pp. 1-3. IEEE, 2021

Template Dissolution Interfacial Patterning of Single Colloids for Nanoelectrochemistry and Nanosensing

Authors: Joong Bum Lee, Harriet Walker, Yi Li, Tae Won Nam, Aliaksandra Rakovich, Riccardo Sapienza, Yeon Sik Jung, Yoon Sung Nam, Stefan A. Maier, Emiliano Cortés

Abstract: Deterministic positioning and assembly of colloidal nanoparticles (NPs) onto substrates is a core requirement and a promising alternative to top down lithography to create functional nanostructures and nanodevices with intriguing optical, electrical, and catalytic features. Capillary-assisted particle assembly (CAPA) has emerged as an attractive technique to this end, as it allows controlled and s… ▽ More Deterministic positioning and assembly of colloidal nanoparticles (NPs) onto substrates is a core requirement and a promising alternative to top down lithography to create functional nanostructures and nanodevices with intriguing optical, electrical, and catalytic features. Capillary-assisted particle assembly (CAPA) has emerged as an attractive technique to this end, as it allows controlled and selective assembly of a wide variety of NPs onto predefined topographical templates using capillary forces. One critical issue with CAPA, however, lies in its final printing step, where high printing yields are possible only with the use of an adhesive polymer film. To address this problem, we have developed a template dissolution interfacial patterning (TDIP) technique to assemble and print single colloidal AuNP arrays onto various dielectric and conductive substrates in the absence of any adhesion layer, with printing yields higher than 98%. The TDIP approach grants direct access to the interface between the AuNP and the target surface, enabling the use of colloidal AuNPs as building blocks for practical applications. The versatile applicability of TDIP is demonstrated by the creation of direct electrical junctions for electro- and photoelectrochemistry and nanoparticle-on-mirror geometries for single particle molecular sensing. △ Less

Submitted 25 August, 2021; originally announced September 2021.

Journal ref: ACS Nano 14 (2020) 17693-17703

Pseudo-magnetic field-induced ultra-slow carrier dynamics in periodically strained graphene

Authors: Dong-Ho Kang, Hao Sun, Manlin Luo, Kunze Lu, Melvina Chen, Youngmin Kim, Yongduck Jung, Xuejiao Gao, Samuel Jior Parluhutan, Junyu Ge, See Wee Koh, David Giovanni, Tze Chien Sum, Qi Jie Wang, Hong Li, Donguk Nam

Abstract: The creation of pseudo-magnetic fields in strained graphene has emerged as a promising route to allow observing intriguing physical phenomena that would be unattainable with laboratory superconducting magnets. Scanning tunneling spectroscopy experiments have successfully measured the pseudo-Landau levels and proved the existence of pseudo-magnetic fields in various strained graphene systems. These… ▽ More The creation of pseudo-magnetic fields in strained graphene has emerged as a promising route to allow observing intriguing physical phenomena that would be unattainable with laboratory superconducting magnets. Scanning tunneling spectroscopy experiments have successfully measured the pseudo-Landau levels and proved the existence of pseudo-magnetic fields in various strained graphene systems. These giant pseudo-magnetic fields observed in highly deformed graphene can substantially alter the optical properties of graphene beyond a level that can be feasible with an external magnetic field, but the experimental signatures of the influence of such pseudo-magnetic fields have yet to be unveiled. Here, using time-resolved infrared pump-probe spectroscopy, we provide unambiguous evidence for ultra-slow carrier dynamics enabled by pseudo-magnetic fields in periodically strained graphene. Strong pseudo-magnetic fields of ~100 T created by non-uniform strain in graphene nanopillars are found to significantly decelerate the relaxation processes of hot carriers by more than an order of magnitude. Our finding presents unforeseen opportunities for harnessing the new physics of graphene enabled by pseudo-magnetic fields for optoelectronics and condensed matter physics. △ Less

Submitted 26 July, 2021; originally announced July 2021.

Comments: Main: 21 pages, 4 figures / SI: 13 pages, 5 figures

Bismuth-do** Alters Structural Phase Transitions in Methylammonium Lead Tribromide Single Crystals

Authors: Erin Jedlicka, Jian Wang, Joshua Mutch, Young-Kwang Jung, Preston Went, Joseph Mohammed, Mark Ziffer, Rajiv Giridharagopal, Aron Walsh, Jiun-Haw Chu, David S. Ginger

Abstract: We study the effects of bismuth do** on the crystal structure and phase transitions in single crystals of the perovskite semiconductor methylammonium lead tribromide, MAPbBr3. By measuring temperature-dependent specific heat capacity (Cp) we find that, as Bi do** increases, the phase transition assigned to the cubic to tetragonal phase boundary decreases in temperature. Furthermore, after dopi… ▽ More We study the effects of bismuth do** on the crystal structure and phase transitions in single crystals of the perovskite semiconductor methylammonium lead tribromide, MAPbBr3. By measuring temperature-dependent specific heat capacity (Cp) we find that, as Bi do** increases, the phase transition assigned to the cubic to tetragonal phase boundary decreases in temperature. Furthermore, after do** we observe one phase transition between 135 and 155 K, in contrast to two transitions observed in the undoped single crystal. These results appear strikingly similar to previously reported effects of mechanical pressure on perovskite crystal structure. Using X-ray diffraction, we show that the lattice constant decreases as Bi is incorporated into the crystal, as predicted by density functional theory (DFT). We propose that bismuth substitutional do** on the lead site is dominant, resulting in BiPb+ centers which induce compressive chemical strain that alters the crystalline phase transitions. △ Less

Submitted 16 March, 2021; v1 submitted 16 February, 2021; originally announced February 2021.

Comments: 19 pages, 4 figures

Journal ref: J. Phys. Chem. Lett. 2021, 12, 2749 - 2755

Observation of photoelectric nonvolatile memory and oscillations in VO2 at room temperature

Authors: Youngho Jung, Junho Jeong, Zhongnan Qu, Bin Cui, Ankita Khanda, Stuart S. P. Parkin, Joyce K. S. Poon

Abstract: Vanadium dioxide (VO2) is a phase change material that can reversibly change between high and low resistivity states through electronic and structural phase transitions. Thus far, VO2 memory devices have essentially been volatile at room temperature, and nonvolatile memory has required non-ambient surroundings (e.g., elevated temperatures, electrolytes) and long write times. Here, we report the fi… ▽ More Vanadium dioxide (VO2) is a phase change material that can reversibly change between high and low resistivity states through electronic and structural phase transitions. Thus far, VO2 memory devices have essentially been volatile at room temperature, and nonvolatile memory has required non-ambient surroundings (e.g., elevated temperatures, electrolytes) and long write times. Here, we report the first observation of optically addressable nonvolatile memory in VO2 at room temperature with a readout by voltage oscillations. The read and write times had to be kept shorter than about 150 μs. The writing of the memory and onset of the voltage oscillations had a minimum optical power threshold. This discovery demonstrates the potential of VO2 for new computing devices and architectures, such as artificial neurons and oscillatory neural networks. △ Less

Submitted 23 October, 2020; originally announced October 2020.

Comments: 31 pages

Multipurpose and Reusable Ultrathin Electronic Tattoos Based on PtSe2 and PtTe2

Authors: Dmitry Kireev, Emmanuel Okogbue, Jayanth RT, Tae-Jun Ko, Yeonwoong Jung, Deji Akinwande

Abstract: Wearable bioelectronics with emphasis on the research and development of advanced person-oriented biomedical devices have attracted immense interest in the last decade. Scientists and clinicians find it essential to utilize skin-worn smart tattoos for on-demand and ambulatory monitoring of an individual's vital signs. Here we report on the development of novel ultrathin platinum-based two-dimensio… ▽ More Wearable bioelectronics with emphasis on the research and development of advanced person-oriented biomedical devices have attracted immense interest in the last decade. Scientists and clinicians find it essential to utilize skin-worn smart tattoos for on-demand and ambulatory monitoring of an individual's vital signs. Here we report on the development of novel ultrathin platinum-based two-dimensional dichalcogenide (Pt-TMDs) based electronic tattoos as advanced building blocks of future wearable bioelectronics. We made these ultrathin electronic tattoos out of large-scale synthesized platinum diselenide (PtSe2) and platinum ditelluride (PtTe2) layered materials and used them for monitoring human physiological vital signs, such as the electrical activity of the heart and the brain, muscle contractions, eye movements, and temperature. We show that both materials can be used for these applications; yet, PtTe2 was found to be the most suitable choice due to its metallic structure. In terms of sheet resistance, skin-contact, and electrochemical impedance, PtTe2 outperforms state-of-the-art gold and graphene electronic tattoos and performs on par with medical-grade Ag/AgCl gel electrodes. The PtTe2 tattoos show four times lower impedance and almost 100 times lower sheet resistance compared to monolayer graphene tattoos. One of the possible prompt implications of the work is perhaps in the development of advanced human-machine interfaces. To display the application, we built a multi-tattoo system that can easily distinguish eye movement and identify the direction of an individual's sight. △ Less

Submitted 15 October, 2020; originally announced October 2020.

Lattice compression increases the activation barrier for phase segregation in mixed-halide perovskites

Authors: Loreta A. Muscarella, Eline M. Hutter, Francesca Wittmann, Young Won Woo, Young-Kwang Jung, Lucie McGovern, Jan Versluis, Aron Walsh, Huib J. Bakker, Bruno Ehrler

Abstract: The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhan… ▽ More The bandgap tunability of mixed-halide perovskites makes them promising candidates for light emitting diodes and tandem solar cells. However, illuminating mixed-halide perovskites results in the formation of segregated phases enriched in a single-halide. This segregation occurs through ion migration, which is also observed in single-halide compositions, and whose control is thus essential to enhance the lifetime and stability. Using pressure-dependent transient absorption spectroscopy, we find that the formation rates of both iodide- and bromide-rich phases in MAPb(BrxI1-x)3 reduce by two orders of magnitude on increasing the pressure to 0.3 GPa. We explain this reduction from a compression-induced increase of the activation energy for halide migration, which is supported by first-principle calculations. A similar mechanism occurs when the unit cell volume is reduced by incorporating a smaller cation. These findings reveal that stability with respect to halide segregation can be achieved either physically through compressive stress or chemically through compositional engineering. △ Less

Submitted 9 July, 2020; originally announced July 2020.

An invertible crystallographic representation for general inverse design of inorganic crystals with targeted properties

Authors: Zekun Ren, Siyu Isaac Parker Tian, Juhwan Noh, Felipe Oviedo, Guangzong Xing, Jiali Li, Qiaohao Liang, Ruiming Zhu, Armin G. Aberle, Shi**g Sun, Xiaonan Wang, Yi Liu, Qianxiao Li, Senthilnath Jayavelu, Kedar Hippalgaonkar, Yousung Jung, Tonio Buonassisi

Abstract: Realizing general inverse design could greatly accelerate the discovery of new materials with user-defined properties. However, state-of-the-art generative models tend to be limited to a specific composition or crystal structure. Herein, we present a framework capable of general inverse design (not limited to a given set of elements or crystal structures), featuring a generalized invertible repres… ▽ More Realizing general inverse design could greatly accelerate the discovery of new materials with user-defined properties. However, state-of-the-art generative models tend to be limited to a specific composition or crystal structure. Herein, we present a framework capable of general inverse design (not limited to a given set of elements or crystal structures), featuring a generalized invertible representation that encodes crystals in both real and reciprocal space, and a property-structured latent space from a variational autoencoder (VAE). In three design cases, the framework generates 142 new crystals with user-defined formation energies, bandgap, thermoelectric (TE) power factor, and combinations thereof. These generated crystals, absent in the training database, are validated by first-principles calculations. The success rates (number of first-principles-validated target-satisfying crystals/number of designed crystals) ranges between 7.1% and 38.9%. These results represent a significant step toward property-driven general inverse design using generative models, although practical challenges remain when coupled with experimental synthesis. △ Less

Submitted 15 December, 2021; v1 submitted 15 May, 2020; originally announced May 2020.

MLSolv-A: A Novel Machine Learning-Based Prediction of Solvation Free Energies from Pairwise Atomistic Interactions

Authors: Hyuntae Lim, YounJoon Jung

Abstract: Recent advances in machine learning and their applications have lead to the development of diverse structure-property relationship models for crucial chemical properties, and the solvation free energy is one of them. Here, we introduce a novel ML-based solvation model, which calculates the solvation energy from pairwise atomistic interactions. The novelty of the proposed model consists of a simple… ▽ More Recent advances in machine learning and their applications have lead to the development of diverse structure-property relationship models for crucial chemical properties, and the solvation free energy is one of them. Here, we introduce a novel ML-based solvation model, which calculates the solvation energy from pairwise atomistic interactions. The novelty of the proposed model consists of a simple architecture: two encoding functions extract atomic feature vectors from the given chemical structure, while the inner product between two atomistic features calculates their interactions. The results on 6,493 experimental measurements achieve outstanding performance and transferability for enlarging training data due to its solvent-non-specific nature. Analysis of the interaction map shows there is a great potential that our model reproduces group contributions on the solvation energy, which makes us believe that the model not only provides the predicted target property but also gives us more detailed physicochemical insights. △ Less

Submitted 2 July, 2020; v1 submitted 13 May, 2020; originally announced May 2020.

Comments: 20 pages, 5 figures

Bulk nanostructured AlCoCrFeMnNi chemically complex alloy synthesized by laser-powder bed fusion process

Authors: Hyo Yun Jung, Nicolas J. Peter, Eric Gärtner, Gerhard Dehm, Volker Uhlenwinkel, Eric A. Jägle

Abstract: We report the synthesis of a bulk nanostructured alloy using the laser-powder bed fusion process. The equiatomic AlCoCrFeMnNi chemically complex alloy forms a nanoscale modulated structure, which is homogeneously distributed in the as-built condition. The nanostructure consisted of Al & Ni-rich ordered (B2) and Cr & Fe-rich disordered (A2) BCC phases. The two phases form an interconnected phase-ne… ▽ More We report the synthesis of a bulk nanostructured alloy using the laser-powder bed fusion process. The equiatomic AlCoCrFeMnNi chemically complex alloy forms a nanoscale modulated structure, which is homogeneously distributed in the as-built condition. The nanostructure consisted of Al & Ni-rich ordered (B2) and Cr & Fe-rich disordered (A2) BCC phases. The two phases form an interconnected phase-network with coherent interface boundaries. Atom-probe-tomography and aberration-corrected scanning transmission electron microscopy analysis of the spatial distribution of the modulated structure suggests the occurrence of nano-scale spinodal decomposition. These results introduce a direct synthesis of bulk nanostructured alloys with promising geometric flexibility. △ Less

Submitted 5 April, 2020; originally announced April 2020.

Comments: 21 pages, 7 Figures

Generative Adversarial Networks for Crystal Structure Prediction

Authors: Sungwon Kim, Juhwan Noh, Geun Ho Gu, Alán Aspuru-Guzik, Yousung Jung

Abstract: The constant demand for new functional materials calls for efficient strategies to accelerate the materials design and discovery. In addressing this challenge, machine learning generative models can offer promising opportunities since they allow for the continuous navigation of chemical space via low dimensional latent spaces. In this work, we employ a crystal representation that is inversion-free… ▽ More The constant demand for new functional materials calls for efficient strategies to accelerate the materials design and discovery. In addressing this challenge, machine learning generative models can offer promising opportunities since they allow for the continuous navigation of chemical space via low dimensional latent spaces. In this work, we employ a crystal representation that is inversion-free with a low memory requirement based on unit cell information and fractional atomic coordinates, and build the generative adversarial network (GAN) for crystal structures. The proposed model is then applied to the Mg-Mn-O ternary inorganic materials system to generate novel structures with application as potential water-splitting photoanodes, and combined with the evaluation of their photoanode properties for high-throughput virtual screening (HTVS). The generative-HTVS system that we built predicts 23 new crystal structures with a reasonable predicted stability and bandgap. These findings suggest that the proposed generative model can be an effective way to explore hidden portions of the chemical space, an area that is usually unreachable when conventional substitution-based discovery is employed. △ Less

Submitted 23 June, 2020; v1 submitted 3 April, 2020; originally announced April 2020.

Sparking mashups to form multifunctional alloy nanoparticles

Authors: Jicheng Feng, Dong Chen, Peter V. Pikhitsa, Yoon-ho Jung, Jun Yang, Mansoo Choi

Abstract: Synthesizing unconventional alloys remains challenging owing to seamless interactions between kinetics and thermodynamics. High entropy alloys (HEAs), for example, draw a fundamentally new concept to enable exploring unknown regions in phase diagrams. The exploration, however, is hindered by traditional metallurgies based on liquid-solid transformation. Vapor-solid transformation that is permissib… ▽ More Synthesizing unconventional alloys remains challenging owing to seamless interactions between kinetics and thermodynamics. High entropy alloys (HEAs), for example, draw a fundamentally new concept to enable exploring unknown regions in phase diagrams. The exploration, however, is hindered by traditional metallurgies based on liquid-solid transformation. Vapor-solid transformation that is permissible on pressure-temperature phase diagrams, offers the most kinetically efficient pathway to form any desired alloy (e.g., HEA). Here, we report that a technique called "sparking mashups", which involves a rapidly quenched vapor source and induces unrestricted mixing for alloying 55 distinct types of ultrasmall nanoparticles (NPs) with controllable compositions. Unlike the precursor feed in wet chemistry, a microseconds-long oscillatory spark controls the vapour composition, which is eventually retained in the alloy NPs. The resulting NPs range from binary to HEAs with marked thermal stability at room temperature. We show that a nanosize-effect ensures such thermal stability and mimics the role of mixing entropy in HEAs. This discovery contradicts the traditional "smaller is less stable" view while enabling the elemental combinations that have never been alloyed to date. We even break the miscibility limits by mixing bulk-immiscible systems in alloy NPs. As powerful examples, we demonstrate the alloy NPs as both high-performance fuel-cell catalysts and building blocks for three-dimensional (3D) nanoprinting to construct HEA nanostructure arrays of various architectures and compositions. Our results form the basis of new rules for guiding HEA-NP synthesis and advancing catalysis and 3D printing to new frontiers. △ Less

Submitted 15 October, 2019; v1 submitted 17 September, 2019; originally announced September 2019.

Many-Chain Effects on the Co-nonsolvency of Polymer Brushes in a Good Solvent Mixture

Authors: Gyehyun Park, YounJoon Jung

Abstract: Polymer brushes normally swell in a good solvent and collapse in a poor solvent. An abnormal response of polymer brushes, so-called co-nonsolvency, is the phenomenon where the brush counter-intuitively collapses in a good solvent mixture. In this work, we employed molecular dynamics simulations to investigate the structural properties of the grafted polymers on the occurrence of co-nonsolvency. Br… ▽ More Polymer brushes normally swell in a good solvent and collapse in a poor solvent. An abnormal response of polymer brushes, so-called co-nonsolvency, is the phenomenon where the brush counter-intuitively collapses in a good solvent mixture. In this work, we employed molecular dynamics simulations to investigate the structural properties of the grafted polymers on the occurrence of co-nonsolvency. Brushes with various grafting densities were considered to study the effect of topological excluded volumes on the co-nonsolvency. We found that the brush height follows a novel scaling behavior of the grafting density $h \sim σ_{\text g}^{0.71}$ in the co-nonsolvent mixture. Using the scaling exponent and Alexander-de Gennes theory, an analytic function that predicts the monomer density was obtained. The many-chain effects in the co-nonsolvent lead to the formation of both intermolecular and intramolecular bridging structures. Increasing the grafting density entails lower loo** events occuring because of the intermolcular bridging, causing diverse structural properties. We report how the average thickness, the polymer orientation, and the loo** probability varies as the grafting density increases. Based on these observations, we constructed a phase diagram of the polymer brush system using the average thickness and orientation as order parameters. Our simulations and analytical results reveal the nature of co-nonsolvency in polymer brushes in an explicit way and will help to provide practical guidelines for applications such as drug delivery and sensor devices. △ Less

Submitted 23 August, 2019; v1 submitted 31 May, 2019; originally announced May 2019.

Enhanced Superconductivity in Monolayer $T_d$-MoTe$_2$ with Tilted Ising Spin Texture

Authors: Daniel Rhodes, Noah F. Yuan, Younghun Jung, Abhinandan Antony, Hua Wang, Bumho Kim, Yu-che Chiu, Takashi Taniguchi, Kenji Watanabe, Katayun Barmak, Luis Balicas, Cory R. Dean, Xiaofeng Qian, Liang Fu, Abhay N. Pasupathy, James Hone

Abstract: Crystalline two-dimensional (2D) superconductors with low carrier density are an exciting new class of materials in which superconductivity coexists with strong interactions, the effects of complex topology are not obscured by disorder, and electronic properties can be strongly tuned by electrostatic gating. Very recently, two such materials, 'magic-angle' twisted bilayer graphene and monolayer… ▽ More Crystalline two-dimensional (2D) superconductors with low carrier density are an exciting new class of materials in which superconductivity coexists with strong interactions, the effects of complex topology are not obscured by disorder, and electronic properties can be strongly tuned by electrostatic gating. Very recently, two such materials, 'magic-angle' twisted bilayer graphene and monolayer $T_d$-WTe$_2$, have been reported to show superconductivity at temperatures near 1 K. Here we report superconductivity in semimetallic monolayer $T_d$-MoTe$_2$. The critical temperature $T_\textrm{c}$ reaches 8 K, a sixty-fold enhancement as compared to the bulk. This anomalous increase in $T_\textrm{c}$ is only observed in monolayers, and may be indicative of electronically mediated pairing. Reflecting the low carrier density, the critical temperature, magnetic field, and current density are all tunable by an applied gate voltage, revealing a superconducting dome that extends across both hole and electron pockets. The temperature dependence of the in-plane upper critical field is distinct from that of $2H$ transition metal dichalcogenides (TMDs), consistent with a tilted spin texture as predicted by \textit{ab initio} theory. △ Less

Submitted 19 August, 2020; v1 submitted 15 May, 2019; originally announced May 2019.

Coarse-graining strategy for modeling effective, highly diffusive fluids with reduced polydispersity: A dynamical study

Authors: Thomas Heinemann, YounJoon Jung

Abstract: We present a coarse-graining strategy for reducing the number of particle species in mixtures to achieve a simpler system with higher diffusion while preserving the total particle number and characteristic dynamic features. As a system of application, we chose the bidisperse Lennard-Jones-like mixture discovered by Kob and Andersen [Phys. Rev. Lett. 73, 1376 (1994)] possessing a slow dynamics due… ▽ More We present a coarse-graining strategy for reducing the number of particle species in mixtures to achieve a simpler system with higher diffusion while preserving the total particle number and characteristic dynamic features. As a system of application, we chose the bidisperse Lennard-Jones-like mixture discovered by Kob and Andersen [Phys. Rev. Lett. 73, 1376 (1994)] possessing a slow dynamics due to the fluid's multi-component character with its apparently unconventional choice for the pair potential of the type-A-type-B arrangement. We further established in a so-formed coarse-grained and temperature-independent monodisperse system an equilibrium structure with a radial distribution function resembling its mixture counterpart. This one-component system further possesses similar dynamic features like glass transition temperature and critical exponents while subjected to Newtonian mechanics. This strategy may finally lead to the manufacturing of new nanoparticle/colloidal fluids by experimentally modeling only the outcoming effective pair potential(s) and no other macroscopic quantity. △ Less

Submitted 14 September, 2020; v1 submitted 5 March, 2019; originally announced March 2019.

Comments: 19 pages, 16 figures

Journal ref: J. Chem. Phys. 153, 104509 (2020)

The interfacial spin modulation of graphene on Fe(111)

Authors: J. Hong, H. -N. Hwang, A. T. NDiaye, J. Liang, G. Chen, Y. Park, L. T. Singh, Y. G. Jung, J. -H. Yang, J. -I. Jeong, A. K. Schmid, E. Arenholz, H. Yang, J. Bokor, C. -C. Hwang, L. You

Abstract: When Fe, which is a typical ferromagnet using d- or f-orbital states, is combined with 2D materials such as graphene, it offers many opportunities for spintronics. The origin of 2D magnetism is from magnetic insulating behaviors, which could result in magnetic excitations and also proximity effects. However, the phenomena were only observed at extremely low temperatures. Fe and graphene interfaces… ▽ More When Fe, which is a typical ferromagnet using d- or f-orbital states, is combined with 2D materials such as graphene, it offers many opportunities for spintronics. The origin of 2D magnetism is from magnetic insulating behaviors, which could result in magnetic excitations and also proximity effects. However, the phenomena were only observed at extremely low temperatures. Fe and graphene interfaces could control spin structures in which they show a unique atomic spin modulation and magnetic coupling through the interface. Another reason for covering graphene on Fe is to prevent oxidation under ambient conditions. We investigated the engineering of spin configurations by growing monolayer graphene on an Fe(111) single crystal surface and observed the presence of sharply branched, 3D tree-like domain structures. Magnetization by a swee** magnetic field (m-H) revealed that the interface showed canted magnetization in the in-plane (IP) orientation. Moreover, graphene could completely prevent the oxidation of the Fe surface. The results indicate possible control of the spin structures at the atomic scale and the interface phenomena in the 2D structure. The study introduces a new approach for room temperature 2D magnetism. △ Less

Submitted 24 November, 2018; originally announced November 2018.

Comments: 22 pages, 4 figures

Uniform vapor pressure based CVD growth of MoS2 using MoO3 thin film as a precursor for co-evaporation

Authors: Sajeevi S. Withanage, Hirokjyoti Kalita, Hee-Suk Chung, Tania Roy, Yeonwoong Jung, Saiful I. Khondaker

Abstract: Chemical vapor deposition (CVD) is a powerful method employed for high quality monolayer crystal growth of 2D transition metal dichalcogenides with much effort invested toward improving the growth process. Here, we report a novel method for CVD based growth of monolayer molybdenum disulfide (MoS2) by using thermally evaporated thin films of molybdenum trioxide (MoO3) as the molybdenum (Mo) source… ▽ More Chemical vapor deposition (CVD) is a powerful method employed for high quality monolayer crystal growth of 2D transition metal dichalcogenides with much effort invested toward improving the growth process. Here, we report a novel method for CVD based growth of monolayer molybdenum disulfide (MoS2) by using thermally evaporated thin films of molybdenum trioxide (MoO3) as the molybdenum (Mo) source for co-evaporation. Uniform evaporation rate of the MoO3 thin films provides uniform Mo vapor which promotes highly reproducible single crystal growth of MoS2 throughout the substrate. These high-quality crystals are as large as 95 um and were characterized by scanning electron microscopy, Raman spectroscopy, photoluminescence spectroscopy, atomic force microscopy and transmission electron microscopy. The bottom gated field effect transistors fabricated using the as grown single crystals show n-type transistor behavior with a good on/off ratio of 10^6 under ambient condition. Our results presented here addresses the precursor vapor control during the CVD process and is a major step forward toward reproducible growth of MoS2 for future semiconductor device applications. △ Less

Submitted 9 January, 2019; v1 submitted 14 November, 2018; originally announced November 2018.

Comments: 31 pages, 14 figures

Journal ref: ACS Omega, 2018

Quick-start guide for first-principles modelling of semiconductor interfaces

Authors: Ji-Sang Park, Young-Kwang Jung, Keith T. Butler, Aron Walsh

Abstract: Interfaces between dissimilar materials control the transport of energy in a range of technologies including solar cells (electron transport), batteries (ion transport), and thermoelectrics (heat transport). Advances in computer power and algorithms means that first-principles models of interfacial processes in realistic systems are now possible using accurate approaches such as density functional… ▽ More Interfaces between dissimilar materials control the transport of energy in a range of technologies including solar cells (electron transport), batteries (ion transport), and thermoelectrics (heat transport). Advances in computer power and algorithms means that first-principles models of interfacial processes in realistic systems are now possible using accurate approaches such as density functional theory. In this `quick-start guide', we discuss the best practice in how to construct atomic models between two materials and analysis techniques appropriate to probe changes in local bonding and electronic band offsets. A number of examples are given related to perovskite solar cells. △ Less

Submitted 1 August, 2018; originally announced August 2018.

Journal ref: J Phys Energy 1, 016001 (2019)

Local Strain Heterogeneity Influences the Optoelectronic Properties of Halide Perovskites

Authors: Timothy W. Jones, Anna Osherov, Mejd Alsari, Melany Sponseller, Benjamin C. Duck, Young-Kwang Jung, Charles Settens, Farnaz Niroui, Roberto Brenes, Camelia V. Stan, Yao Li, Mojtaba Abdi-Jalebi, Nobumichi Tamura, J. Emyr Macdonald, Manfred Burghammer, Richard H. Friend, Vladimir Bulović, Aron Walsh, Gregory J. Wilson, Samuele Lilliu, Samuel D. Stranks

Abstract: Halide perovskites are promising semiconductors for inexpensive, high-performance optoelectronics. Despite a remarkable defect tolerance compared to conventional semiconductors, perovskite thin films still show substantial microscale heterogeneity in key properties such as luminescence efficiency and device performance. This behavior has been attributed to spatial fluctuations in the population of… ▽ More Halide perovskites are promising semiconductors for inexpensive, high-performance optoelectronics. Despite a remarkable defect tolerance compared to conventional semiconductors, perovskite thin films still show substantial microscale heterogeneity in key properties such as luminescence efficiency and device performance. This behavior has been attributed to spatial fluctuations in the population of sub-bandgap electronic states that act as trap-mediated non-radiative recombination sites. However, the origin of the variations, trap states and extent of the defect tolerance remains a topic of debate, and a precise understanding is critical to the rational design of defect management strategies. By combining scanning X-ray diffraction beamlines at two different synchrotrons with high-resolution transmission electron microscopy, we reveal levels of heterogeneity on the ten-micrometer scale (super-grains) and even ten-nanometer scale (sub-grain domains). We find that local strain is associated with enhanced defect concentrations, and correlations between the local structure and time-resolved photoluminescence reveal that these strain-related defects are the cause of non-radiative recombination. We reveal a direct connection between defect concentrations and non-radiative losses, as well as complex heterogeneity across multiple length scales, shedding new light on the presence and influence of structural defects in halide perovskites. △ Less

Submitted 15 May, 2018; v1 submitted 3 March, 2018; originally announced March 2018.

Via Method for Lithography Free Contact and Preservation of 2D Materials

Authors: Evan J. Telford, Avishai Benyamini, Daniel Rhodes, Da Wang, Younghun Jung, Amirali Zangiabadi, Kenji Watanabe, Takashi Taniguchi, Shuang Jia, Katayun Barmak, Abhay N. Pasupathy, Cory R. Dean, James Hone

Abstract: Atomically thin 2D materials span the common components of electronic circuits as metals, semi-conductors, and insulators, and can manifest correlated phases such as superconductivity, charge density waves, and magnetism. An ongoing challenge in the field is to incorporate these 2D materials into multi-layer hetero-structures with robust electrical contacts while preventing disorder and degradatio… ▽ More Atomically thin 2D materials span the common components of electronic circuits as metals, semi-conductors, and insulators, and can manifest correlated phases such as superconductivity, charge density waves, and magnetism. An ongoing challenge in the field is to incorporate these 2D materials into multi-layer hetero-structures with robust electrical contacts while preventing disorder and degradation. In particular, preserving and studying air-sensitive 2D materials has presented a significant challenge since they readily oxidize under atmospheric conditions. We report a new technique for contacting 2D materials, in which metal via contacts are integrated into flakes of insulating hexagonal boron nitride, and then placed onto the desired conducting 2D layer, avoiding direct lithographic patterning onto the 2D conductor. The metal contacts are planar with the bottom surface of the boron nitride and form robust contacts to multiple 2D materials. These structures protect air-sensitive 2D materials for months with no degradation in performance. This via contact technique will provide the capability to produce atomic printed circuit boards that can form the basis of more complex multi-layer heterostructures. △ Less

Submitted 6 February, 2018; originally announced February 2018.

Comments: 16 pages, 4 figures

Catalyst design using actively learned machine with non-ab initio input features towards CO2 reduction reactions

Authors: Juhwan Noh, Jaehoon Kim, Seoin Back, Yousung Jung

Abstract: In conventional chemisorption model, the d-band center theory (augmented sometimes with the upper edge of d-band for imporved accuarcy) plays a central role in predicting adsorption energies and catalytic activity as a function of d-band center of the solid surfaces, but it requires density functional calculations that can be quite costly for large scale screening purposes of materials. In this wo… ▽ More In conventional chemisorption model, the d-band center theory (augmented sometimes with the upper edge of d-band for imporved accuarcy) plays a central role in predicting adsorption energies and catalytic activity as a function of d-band center of the solid surfaces, but it requires density functional calculations that can be quite costly for large scale screening purposes of materials. In this work, we propose to use the d-band width of the muffin-tin orbital theory (to account for local coordination environment) plus electronegativity (to account for adsorbate renormalization) as a simple set of alternative descriptors for chemisorption, which do not demand the ab initio calculations. This pair of descriptors are then combined with machine learning methods, namely, artificial neural network (ANN) and kernel ridge regression (KRR), to allow large scale materials screenings. We show, for a toy set of 263 alloy systems, that the CO adsorption energy can be predicted with a remarkably small mean absolute deviation error of 0.05 eV, a significantly improved result as compared to 0.13 eV obtained with descriptors including costly d-band center calculations in literature. We achieved this high accuracy by utilizing an active learning algorithm, without which the accuracy was 0.18 eV otherwise. As a practical application of this machine, we identified Cu3Y@Cu as a highly active and cost-effective electrochemical CO2 reduction catalyst to produce CO with the overpotential 0.37 V lower than Au catalyst. △ Less

Submitted 13 September, 2017; originally announced September 2017.

Comments: Under review and including Electronic Supplementary Information (ESI)

Low-threshold optically pumped lasing in highly strained Ge nanowires

Authors: Shuyu Bao, Daeik Kim, Chibuzo Onwukaeme, Shashank Gupta, Krishna Saraswat, Kwang Hong Lee, Yeji Kim, Dabin Min, Yongduck Jung, Haodong Qiu, Hong Wang, Eugene A. Fitzgerald, Chuan Seng Tan, Donguk Nam

Abstract: The integration of efficient, miniaturized group IV lasers into CMOS architecture holds the key to the realization of fully functional photonic-integrated circuits. Despite several years of progress, however, all group IV lasers reported to date exhibit impractically high thresholds owing to their unfavorable bandstructures. Highly strained germanium with its fundamentally altered bandstructure ha… ▽ More The integration of efficient, miniaturized group IV lasers into CMOS architecture holds the key to the realization of fully functional photonic-integrated circuits. Despite several years of progress, however, all group IV lasers reported to date exhibit impractically high thresholds owing to their unfavorable bandstructures. Highly strained germanium with its fundamentally altered bandstructure has emerged as a potential low-threshold gain medium, but there has yet to be any successful demonstration of lasing from this seemingly promising material system. Here, we demonstrate a low-threshold, compact group IV laser that employs germanium nanowire under a 1.6% uniaxial tensile strain as the gain medium. The amplified material gain in strained germanium can sufficiently surmount optical losses at 83 K, thus allowing the first observation of multimode lasing with an optical pum** threshold density of ~3.0 kW cm^-^2. Our demonstration opens up a new horizon of group IV lasers for photonic-integrated circuits. △ Less

Submitted 15 August, 2017; originally announced August 2017.

Comments: 31 pages, 9 figures

Study of the upper-critical dimension of the East model through the breakdown of the Stokes-Einstein relation

Authors: Soree Kim, Dayton G. Thorpe, Juan P. Garrahan, David Chandler, YounJoon Jung

Abstract: We investigate the dimensional dependence of dynamical fluctuations related to dynamic heterogeneity in supercooled liquid systems using kinetically constrained models. The $d$-dimensional spin-facilitated East model with embedded probe particles is used as a representative super-Arrhenius glass forming system. We investigate the existence of an upper critical dimension in this model by considerin… ▽ More We investigate the dimensional dependence of dynamical fluctuations related to dynamic heterogeneity in supercooled liquid systems using kinetically constrained models. The $d$-dimensional spin-facilitated East model with embedded probe particles is used as a representative super-Arrhenius glass forming system. We investigate the existence of an upper critical dimension in this model by considering decoupling of transport rates through an effective fractional Stokes-Einstein relation, $D\simτ^{-1+ω}$, with $D$ and $τ$ the diffusion constant of the probe particle and the relaxation time of the model liquid, respectively, and where $ω> 0$ encodes the breakdown of the standard Stokes-Einstein relation. To the extent that decoupling indicates non mean-field behavior, our simulations suggest that the East model has an upper critical dimension which is at least above $d=10$, and argue that it may be actually be infinite. This result is due to the existence of hierarchical dynamics in the East model in any finite dimension. We discuss the relevance of these results for studies of decoupling in high dimensional atomistic models. △ Less

Submitted 28 April, 2017; originally announced May 2017.

Comments: 7 pages, 7 figures

Perspective: Theory and simulation of hybrid halide perovskites

Authors: Lucy D. Whalley, Jarvist M. Frost, Young-Kwang Jung, Aron Walsh

Abstract: Organic-inorganic halide perovskites present a number of challenges for first-principles atomistic materials modelling. These `plastic crystals' feature dynamic processes across multiple length-scales and time-scales, which include: (i) transport of slow ions and fast electrons; (ii) highly anharmonic lattice dynamics with short phonon lifetimes; (iii) local symmetry breaking of the average crysta… ▽ More Organic-inorganic halide perovskites present a number of challenges for first-principles atomistic materials modelling. These `plastic crystals' feature dynamic processes across multiple length-scales and time-scales, which include: (i) transport of slow ions and fast electrons; (ii) highly anharmonic lattice dynamics with short phonon lifetimes; (iii) local symmetry breaking of the average crystallographic space group; (iv) strong relativistic (spin-orbit coupling) effects on the electronic band structure; (v) thermodynamic metastability and rapid chemical breakdown. These issues, which affect the operation of solar cells, are outlined in this perspective. We also discuss general guidelines for performing quantitative and predictive simulations of these materials, which are relevant to metal-organic frameworks and other hybrid semiconducting, dielectric and ferroelectric compounds. △ Less

Submitted 16 May, 2017; v1 submitted 28 March, 2017; originally announced March 2017.

Journal ref: Journal of Chemical Physics 146, 220901 (2017)

Determining the vibrations between sensor and sample in SQUID microscopy

Authors: Daniel Schiessl, John R. Kirtley, Lisa Paulius, Aaron J. Rosenberg, Johanna C. Palmstrom, Rahim R. Ullah, Connor M. Holland, Y. -K. -K. Jung, Mark B. Ketchen, Gerald W. Gibson, Jr., Kathryn A. Moler

Abstract: Vibrations can cause noise in scanning probe microscopies. Relative vibrations between the scanning sensor and the sample are important but can be more difficult to determine than absolute vibrations or vibrations relative to the laboratory. We measure the noise spectral density in a scanning SQUID microscope as a function of position near a localized source of magnetic field, and show that we can… ▽ More Vibrations can cause noise in scanning probe microscopies. Relative vibrations between the scanning sensor and the sample are important but can be more difficult to determine than absolute vibrations or vibrations relative to the laboratory. We measure the noise spectral density in a scanning SQUID microscope as a function of position near a localized source of magnetic field, and show that we can determine the spectra of all three components of the relative sensor-sample vibrations. This method is a powerful tool for diagnosing vibrational noise in scanning microscopies. △ Less

Submitted 2 October, 2016; originally announced October 2016.

Comments: 4 pages, 3 figures

Heterogeneous dynamics and its length scale in simple ionic liquid models: A computational study

Authors: Soree Kim, Sang-Won Park, YounJoon Jung

Abstract: We numerically investigate the dynamic heterogeneity and its length scale found in the coarse-grained ionic liquid model systems. In our ionic liquid model systems, cations are modeled as dimers with positive charge, while anions are modeled as monomers with negative charge, respectively. To study the effect of the charge distributions on the cations, two ionic liquid models with different charge… ▽ More We numerically investigate the dynamic heterogeneity and its length scale found in the coarse-grained ionic liquid model systems. In our ionic liquid model systems, cations are modeled as dimers with positive charge, while anions are modeled as monomers with negative charge, respectively. To study the effect of the charge distributions on the cations, two ionic liquid models with different charge distributions are used and the model with neutral charge is also considered as a counterpart. To reveal the heterogeneous dynamics in the model systems, we examine spatial distributions of displacement and time distributions of exchange and persistence times. All the models show significant increase of the dynamic heterogeneity as the temperature is lowered. The dynamic heterogeneity is quantified via the well-known four-point susceptibility which measures the fluctuation of a time correlation function. The dynamic correlation length is calculated by fitting the dynamic structure factor, S4(k,t), with Ornstein-Zernike form at the time scale at which the dynamic heterogeneity reaches the maximum value. Obtained time and length scales exhibit a power law relation at the low temperatures, similar to various supercooled liquid models. Especially, the charged model systems show unusual crossover behaviors which are not observed in the uncharged model system. We ascribe the crossover behavior to the enhanced cage effect caused by charges on the particles. △ Less

Submitted 8 March, 2016; originally announced March 2016.

Journal ref: Physical Chemistry Chemical Physics 2016,18, 6486-6497

Molecular dynamics study on a nonequilibrium motion of a colloidal particle driven by an external torque

Authors: Donghwan Yoo, Youngkyun Jung, Chulan Kwon

Abstract: We investigate the motion of a colloidal particle driven out of equilibrium by an external torque. We use the molecular dynamics simulation that is alternative to the numerical integration approach based on the Langevin equation and is expected to mimic an experiment more realistically. We choose a heat bath composed of thousands of particles interacting to each other through the Lennard-Jones pot… ▽ More We investigate the motion of a colloidal particle driven out of equilibrium by an external torque. We use the molecular dynamics simulation that is alternative to the numerical integration approach based on the Langevin equation and is expected to mimic an experiment more realistically. We choose a heat bath composed of thousands of particles interacting to each other through the Lennard-Jones potential and impose the Langevin thermostat to maintain it in equilibrium. We prepare a single colloidal particle to interact with the particles of the heat bath also by the Lennard-Jones potential while any dissipative force and noise are not employed. We prepare the simulation protocol fit to the overdamped limit in real experiments by increasing the size and mass of the colloidal particle. We study the stochastic properties of the nonequilibrium fluctuations for work and heat produced incessantly in time. We accurately confirm the fluctuation theorem for the work production. We show our results to agree accurately with those from the numerical integration of the Langevin equation. △ Less

Submitted 30 August, 2016; v1 submitted 17 January, 2016; originally announced January 2016.

Comments: 7 pages, 7 figures

NV Center Electron Paramagnetic Resonance of a Single Nanodiamond Attached to an Individual Biomolecule

Authors: Richelle M. Teeling-Smith, Young Woo Jung, Nicolas Scozzaro, Jeremy Cardellino, Isaac Rampersaud, Justin A. North, Marek Šimon, Vidya P. Bhallamudi, Arfaan Rampersaud, Ezekiel Johnston-Halperin, Michael G. Poirier, P. Chris Hammel

Abstract: A key limitation of electron paramagnetic resonance (EPR), an established and powerful tool for studying atomic-scale biomolecular structure and dynamics is its poor sensitivity, samples containing in excess of 10^12 labeled biomolecules are required in typical experiments. In contrast, single molecule measurements provide improved insights into heterogeneous behaviors that can be masked by ensemb… ▽ More A key limitation of electron paramagnetic resonance (EPR), an established and powerful tool for studying atomic-scale biomolecular structure and dynamics is its poor sensitivity, samples containing in excess of 10^12 labeled biomolecules are required in typical experiments. In contrast, single molecule measurements provide improved insights into heterogeneous behaviors that can be masked by ensemble measurements and are often essential for illuminating the molecular mechanisms behind the function of a biomolecule. We report EPR measurements of a single labeled biomolecule that merge these two powerful techniques. We selectively label an individual double-stranded DNA molecule with a single nanodiamond containing nitrogen-vacancy (NV) centers, and optically detect the paramagnetic resonance of NV spins in the nanodiamond probe. Analysis of the spectrum reveals that the nanodiamond probe has complete rotational freedom and that the characteristic time scale for reorientation of the nanodiamond probe is slow compared to the transverse spin relaxation time. This demonstration of EPR spectroscopy of a single nanodiamond labeled DNA provides the foundation for the development of single molecule magnetic resonance studies of complex biomolecular systems. △ Less

Submitted 20 November, 2015; originally announced November 2015.

Comments: 24 pages, 5 figures

Dynamic Heterogeneity in Crossover Spin Facilitated Model of Supercooled Liquid and Fractional Stokes-Einstein Relation

Authors: Seo-Woo Choi, Soree Kim, YounJoon Jung

Abstract: Kinetically constrained models (KCMs) have gained much interest as models that assign the origins of interesting dynamic properties of supercooled liquids to dynamical facilitation mechanisms that have been revealed in many expreiments and numerical simulations. In this work, we investigate the dynamic heterogeneity in the fragile-to-strong liquid via Monte Carlo method using the model that linear… ▽ More Kinetically constrained models (KCMs) have gained much interest as models that assign the origins of interesting dynamic properties of supercooled liquids to dynamical facilitation mechanisms that have been revealed in many expreiments and numerical simulations. In this work, we investigate the dynamic heterogeneity in the fragile-to-strong liquid via Monte Carlo method using the model that linearly interpolates between the strong-liquid like behavior and the fragile-liquid like behavior by an asymmetry parameter b. When the asymmetry parameter is sufficiently small, smooth fragile-to-strong transition is observed both in the relaxation time and the diffusion constant. Using these physical quantities, we investigate fractional Stokes-Einstein relations observed in this model. When b is fixed, the system shows constant power law exponent under the temperature change, and the exponent has the value between that of the FA model and the East model. Furthermore, we investigate the dynamic length scale of our systems and also find the crossover relation between the relaxation time. We ascribe the competition between energetically favored symmetric relaxation mechanism and entropically favored asymmetric relaxation mechanism to the fragile-to-strong crossover behavior. △ Less

Submitted 20 October, 2015; originally announced October 2015.

Journal ref: J. Chem. Phys. 142, 244506 (2015)

Slowing down of ring polymer diffusion caused by inter-ring threading

Authors: Eunsang Lee, Soree Kim, YounJoon Jung

Abstract: Diffusion of long ring polymers in a melt is much slower than the reorganization of their internal structures. While direct evidences for entanglements have not been observed in the long ring polymers unlike linear polymer melts, threading between the rings is suspected to be the main reason for slowing down of ring polymer diffusion. It is, however, difficult to define the threading configuration… ▽ More Diffusion of long ring polymers in a melt is much slower than the reorganization of their internal structures. While direct evidences for entanglements have not been observed in the long ring polymers unlike linear polymer melts, threading between the rings is suspected to be the main reason for slowing down of ring polymer diffusion. It is, however, difficult to define the threading configuration between two rings because the rings have no chain end. In this work, evidences for threading dynamics of ring polymers are presented by using molecular dynamics simulation and applying a novel analysis method. The simulation results are analyzed in terms of the statistics of persistence and exchange times that have proved useful in studying heterogeneous dynamics of glassy systems. We find that the threading time of ring polymer melts increases more rapidly with the degree of polymerization than that of linear polymer melts. This indicates that threaded ring polymers cannot diffuse until unthreading event occurs, which results in the slowing down of ring polymer diffusion. △ Less

Submitted 20 October, 2015; originally announced October 2015.

Journal ref: Macromol Rapid Commun. 2015 Jun;36(11):1115-21

Segregated structure of ring polymer melts near the surface: Molecular dynamics simulation study

Authors: Eunsang Lee, YounJoon Jung

Abstract: We study structural properties of a ring polymeric melt confined in a film in comparison to a linear counterpart using molecular dynamics simulations. Local structure orderings of ring and linear polymers in the vicinity of the surface are similar to each other because the length scale of surface-monomer excluded volume interaction is smaller than the size of an ideal blob of the ring. In a long l… ▽ More We study structural properties of a ring polymeric melt confined in a film in comparison to a linear counterpart using molecular dynamics simulations. Local structure orderings of ring and linear polymers in the vicinity of the surface are similar to each other because the length scale of surface-monomer excluded volume interaction is smaller than the size of an ideal blob of the ring. In a long length scale, while the Silberberg hypothesis can be used to provide a physical origin of confined linear polymer results, it no longer holds for a ring polymer case. We also present different structural properties of ring and linear polymers in a melt, including the size of polymers, an adsorbed amount, and the coordination number of a polymer. Our observation reveals that a confined ring in a melt adopts highly segregated conformation due to a topological excluded volume repulsion, which may provide a new perspective to understand the nature of biological processes, such as territorial segregation of chromosomes in eukaryotic nuclei. △ Less

Submitted 20 October, 2015; originally announced October 2015.

Journal ref: Soft Matter. 2015 Aug 14;11(30):6018-28

Synthesis of SnTe Nanoplates with {100} and {111} Surfaces

Authors: Jie Shen, Yeonwoong Jung, Ankit S. Disa, Fred J. Walker, Charles H. Ahn, Judy J. Cha

Abstract: SnTe is a topological crystalline insulator that possesses spin-polarized, Dirac-dispersive surface states protected by crystal symmetry. Multiple surface states exist on the {100}, {110}, and {111} surfaces of SnTe, with the band structure of surface states depending on the mirror symmetry of a particular surface. Thus, to access surface states selectively, it is critical to control the morpholog… ▽ More SnTe is a topological crystalline insulator that possesses spin-polarized, Dirac-dispersive surface states protected by crystal symmetry. Multiple surface states exist on the {100}, {110}, and {111} surfaces of SnTe, with the band structure of surface states depending on the mirror symmetry of a particular surface. Thus, to access surface states selectively, it is critical to control the morphology of SnTe such that only desired crystallographic surfaces are present. Here, we grow SnTe nanostructures using vapor-liquid-solid and vapor-solid growth mechanisms. Previously, SnTe nanowires and nanocrystals have been grown.1-4 In this report, we demonstrate synthesis of SnTe nanoplates with lateral dimensions spanning tens of microns and thicknesses of a hundred nanometers. The top and bottom surfaces are either (100) or (111), maximizing topological surface states on these surfaces. Magnetotransport on these SnTe nanoplates shows high bulk carrier density, consistent with bulk SnTe crystals arising due to defects such as Sn vacancies. In addition, we observe a structural phase transition in these nanoplates from the high temperature rock salt to low temperature rhombohedral structure. For nanoplates with very high carrier density, we observe a slight upturn in resistance at low temperatures, indicating electron-electron interactions. △ Less

Submitted 19 June, 2014; originally announced June 2014.

Comments: Nano Lett., Article ASAP,2014

Journal ref: Nano letters 14 (7), 4183-4188, 2014

Near-infrared studies of glucose and sucrose in aqueous solutions: water displacement effect and red shift in water absorption from water-solute interaction

Authors: Youngeui Jung, Jungseek Hwang

Abstract: We use near infrared spectroscopy to obtain concentration dependent glucose absorption spectra in their aqueous solutions in the near-infrared range (3800 - 7500 cm^{-1}). We introduce a new method to obtain reliable glucose absorption bands from aqueous glucose solutions without measuring the water displacement coefficients of glucose separately. Additionally, we are able to extract the water dis… ▽ More We use near infrared spectroscopy to obtain concentration dependent glucose absorption spectra in their aqueous solutions in the near-infrared range (3800 - 7500 cm^{-1}). We introduce a new method to obtain reliable glucose absorption bands from aqueous glucose solutions without measuring the water displacement coefficients of glucose separately. Additionally, we are able to extract the water displacement coefficients of glucose, and this may give a new general method using spectroscopy techniques applicable to other water soluble materials. We also observe red shifts in the absorption bands of water in the hydration shell around solute molecules, which comes from contribution of the interacting water molecules around the glucose molecules in solutions. The intensity of the red shift get larger as the concentration increases, which indicates that as the concentration increases more water molecules are involved in the interaction. However, the red shift in frequency does not seem to depend significantly on the concentration up to our highest concentration. We also performed the same measurements and analysis with sucrose instead of glucose as solute and compare. △ Less

Submitted 2 October, 2013; originally announced October 2013.

Comments: 25 papges, 9 figures

Journal ref: Applied Spectroscopy 67, 171-180(2012)

Comment on "Is there a breakdown of the Stokes-Einstein relation in Kinetically Constrained Models at low temperature?" by O. Blondel and C. Toninelli, arXiv:1307.1651

Authors: YounJoon Jung, Soree Kim, Juan P. Garrahan, David Chandler

Abstract: We consider the diffusion constant, D, of a probe particle coupled to the East model, extending previous numerical results for this model to encompass a total of twelve orders of magnitude in relaxation time, τ. Our considerations thus cover the full range of relaxation times relevant to experimental studies of reversible glass formers. Throughout this range, we show that the results of the model… ▽ More We consider the diffusion constant, D, of a probe particle coupled to the East model, extending previous numerical results for this model to encompass a total of twelve orders of magnitude in relaxation time, τ. Our considerations thus cover the full range of relaxation times relevant to experimental studies of reversible glass formers. Throughout this range, we show that the results of the model are consistent with a fractional Stokes-Einstein law, D \propto τ^{-ξ} with ξ \approx 0.77. The same data can also be fit by relating Dτ to the East model excitation concentration q, specifically, Dτ \sim 1/q^α with α \approx 1.6. In either case, breakdown of the Stokes-Einstein relation in this kinetically constrained model is unquestionable and large. △ Less

Submitted 23 September, 2013; originally announced September 2013.

Comments: 1 page, 1 figure

Stability of xenon oxides at high pressures

Authors: Qiang Zhu, Daniel Y. Jung, Artem R. Oganov, Colin W. Glass, Carlo Gatti, Andriy O. Lyakhov

Abstract: Xenon, which is quite inert under ambient conditions, may become reactive under pressure. The possibility of formation of stable xenon oxides and silicates in the interior of the Earth could explain the atmospheric missing xenon paradox. Using the ab initio evolutionary algorithm, we predict the thermodynamical stabilization of Xe-O compounds at high pressures (XeO, XeO2 and XeO3 at pressures abov… ▽ More Xenon, which is quite inert under ambient conditions, may become reactive under pressure. The possibility of formation of stable xenon oxides and silicates in the interior of the Earth could explain the atmospheric missing xenon paradox. Using the ab initio evolutionary algorithm, we predict the thermodynamical stabilization of Xe-O compounds at high pressures (XeO, XeO2 and XeO3 at pressures above 83, 102 and 114 GPa, respectively). Our calculations indicate large charge transfer in these oxides, suggesting that large electronegativity difference and pressure are the key factors favoring the formation of xenon compounds. Xenon compounds in the Earth's mantle, however, cannot directly explain the missing xenon paradox: xenon oxides are unstable in equilibrium with metallic iron in the Earth's lower mantle, while xenon silicates are predicted to spontaneously decompose at all mantle pressures (<136 GPa). This does not preclude Xe atoms from being retained in defects of mantle silicates and oxides. △ Less

Submitted 29 November, 2012; v1 submitted 28 November, 2012; originally announced November 2012.

Comments: 6 page, 3 figures; Nature Chemistry, 2013 January; http://www.nature.com/nchem/journal/vaop/ncurrent/abs/nchem.1497.html

Using atomic layer deposition to hinder solvent decomposition in lithium ion batteries: first principles modeling and experimental studies

Authors: Kevin Leung, Yue Qi, Kevin R. Zavadil, Yoon Seok Jung, Anne C. Dillon, Andrew S. Cavanagh, Se-Hee Lee, Steven M. George

Abstract: Passivating lithium ion battery electrode surfaces to prevent electrolyte decomposition is critical for battery operations. Recent work on conformal atomic layer deposition (ALD) coating of anodes and cathodes has shown significant technological promise. ALD further provides well-characterized model platforms for understanding electrolyte decomposition initiated by electron tunneling through a pas… ▽ More Passivating lithium ion battery electrode surfaces to prevent electrolyte decomposition is critical for battery operations. Recent work on conformal atomic layer deposition (ALD) coating of anodes and cathodes has shown significant technological promise. ALD further provides well-characterized model platforms for understanding electrolyte decomposition initiated by electron tunneling through a passivating layer. First principles calculations reveal two regimes of electron transfer to adsorbed ethylene carbonate molecules (EC, a main component of commercial electrolyte) depending on whether the electrode is alumina-coated. On bare Li metal electrode surfaces, EC accepts electrons and decomposes within picoseconds. In contrast, constrained density functional theory calculations in an ultra-high vacuum setting show that, with the oxide coating, e- tunneling to the adsorbed EC falls within the non-adiabatic regime. Here the molecular reorganization energy, computed in the harmonic approximation, plays a key role in slowing down electron transfer. Ab initio molecular dynamics simulations conducted at liquid EC-electrode interfaces are consistent with the view that reactions and electron transfer occur right at the interface. Microgravimetric measurements demonstrate that the ALD coating decreases electrolyte decomposition and corroborate the theoretical predictions. △ Less

Submitted 6 October, 2012; originally announced October 2012.

Comments: 40 pages, 7 figures

Journal ref: Journal of the American Chemical Society Vol. 133, p. 14741 (2011)

Bundling dynamics regulates the active mechanics and transport in carbon nanotube networks

Authors: Myung Gwan Hahm, Hailong Wang, Hyunyoung Jung, Sanghyun Hong, Sung-Goo Lee, Sung-Ryong Kim, Moneesh Upmanyu, Yung Joon Jung

Abstract: High-density carbon nanotube networks (CNNs) continue to attract interest as active elements in nanoelectronic devices, nanoelectromechanical systems (NEMS) and multifunctional nanocomposites. The interplay between the network nanostructure and the its properties is crucial, yet current understanding remains limited to the passive response. Here, we employ a novel superstructure consisting of mill… ▽ More High-density carbon nanotube networks (CNNs) continue to attract interest as active elements in nanoelectronic devices, nanoelectromechanical systems (NEMS) and multifunctional nanocomposites. The interplay between the network nanostructure and the its properties is crucial, yet current understanding remains limited to the passive response. Here, we employ a novel superstructure consisting of millimeter-long vertically aligned singe walled carbon nanotubes (SWCNTs) sandwiched between polydimethylsiloxane (PDMS) layers to quantify the effect of two classes of mechanical stimuli, film densification and stretching, on the electronic and thermal transport across the network. The network deforms easily with increase in electrical and thermal conductivities suggestive of floppy yet highly reconfigurable network. Insight from atomistically informed coarse-grained simulations uncover an interplay between the extent of lateral assembly of the bundles, modulated by surface zip**/unzip**, and the elastic energy associated with the bent conformations of the nanotubes/bundles. During densification, the network becomes highly interconnected yet we observe a modest increase in bundling primarily due to the reduced spacing between the SWCNTs. The stretching, on the other hand, is characterized by an initial debundling regime as the strain accommodation occurs via unzip** of the branched interconnects, followed by rapid re-bundling as the strain transfers to the increasingly aligned bundles. In both cases, the increase in the electrical and thermal conductivity is primarily due to the increase in bundle size; the changes in network connectivity have a minor effect on the transport. Our results have broad implications for filamentous networks of inorganic nanoassemblies composed of interacting tubes, wires and ribbons/belts. △ Less

Submitted 9 August, 2011; originally announced August 2011.

Comments: 6 pages, 4 figures