-
Pressure Tuning the Mixture of Eu$^{2+}$ and Eu$^{3+}$ in Eu$_4$Bi$_6$Se$_{13}$
Authors:
Mingyu Xu,
Jose L. Gonzalez Jimenez,
Greeshma C. Jose,
Artittaya Boonkird,
Chengkun Xing,
Chelsea Harrod,
Xinle Li,
Haidong Zhou,
Alyssa Gaiser,
Xianglin Ke,
Wenli Bi,
Mingda Li,
Weiwei Xie
Abstract:
The investigation of crystallographic, electronic, and magnetic characteristics, especially the mixed valences of Eu$^{2+}$ and Eu$^{3+}$ under pressure of a novel europium-based bismuth selenide compound, Eu$_4$Bi$_6$Se$_{13}$, presented. This new compound adopts a monoclinic crystal structure classified under the P$2_1$/m space group (#11). It exhibits distinctive structural features, including…
▽ More
The investigation of crystallographic, electronic, and magnetic characteristics, especially the mixed valences of Eu$^{2+}$ and Eu$^{3+}$ under pressure of a novel europium-based bismuth selenide compound, Eu$_4$Bi$_6$Se$_{13}$, presented. This new compound adopts a monoclinic crystal structure classified under the P$2_1$/m space group (#11). It exhibits distinctive structural features, including substantial Eu-Se coordination numbers, Bi-Se ladders, and linear chains of Eu atoms that propagate along the b-axis. Electronic resistivity assessments indicate that Eu$_{4}$Bi$_{6}$Se$_{13}$ exhibits weak metallic behaviors. Magnetic characterization reveals uniaxial magnetic anisotropy, with a notable spin transition at approximately 1.2 T when the magnetic field is oriented along the b-axis. This behavior, coupled with the specific Eu-Eu interatomic distances and the magnetic saturation observed at low fields, supports the identification of metamagnetic properties attributable to the flip** of europium spins. The Curie-Weiss analysis of the magnetic susceptibility measured both perpendicular and parallel to the b-axis and high-pressure partial fluorescence yield (PFY) results detected by X-ray absorption spectroscopy (XAS) reveal the tendency of the material to enter a mixed valent state where the trivalent state becomes more prominent with the pressure increase or temperature decrease.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Structural investigation of the quasi-one-dimensional topological insulator Bi$_4$I$_4$
Authors:
C. David Hinostroza,
Leandro Rodrigues de Faria,
Gustavo H. Cassemiro,
J. Larrea Jiménez,
Antonio Jefferson da Silva Machado,
Walber H. Brito,
Valentina Martelli
Abstract:
The bismuth-halide Bi$_4$I$_4$ undergoes a structural transition around $T_P\sim 300$K, which separates a high-temperature $β$ phase ($T>T_P$) from a low-temperature $α$ phase ($T<T_P$). $α$ and $β$ phases are suggested to host electronic band structures with distinct topological classifications. Rapid quenching was reported to stabilize a metastable $β$-Bi$_4$I$_4$ at $T<T_P$, making possible a c…
▽ More
The bismuth-halide Bi$_4$I$_4$ undergoes a structural transition around $T_P\sim 300$K, which separates a high-temperature $β$ phase ($T>T_P$) from a low-temperature $α$ phase ($T<T_P$). $α$ and $β$ phases are suggested to host electronic band structures with distinct topological classifications. Rapid quenching was reported to stabilize a metastable $β$-Bi$_4$I$_4$ at $T<T_P$, making possible a comparative study of the physical properties of the two phases in the same low-temperature range. In this work, we present a structural investigation of the Bi$_4$I$_4$ before and after quenching together with electrical resistivity measurements. We found that rapid cooling does not consistently lead to a metastable $β$-Bi$_4$I$_4$, and a quick transition to $α$-Bi$_4$I$_4$ is observed. As a result, the comparison of putative signatures of different topologies attributed to a specific structural phase should be carefully considered. The observed phase instability is accompanied by an increase in iodine vacancies and by a change in the temperature dependence of electrical resistivity, pointing to native defects as a possible origin of our finding. Density functional theory (DFT) calculations support the scenario that iodine vacancies, together with bismuth antisites and interstitials, are among the defects that are more likely to occur in Bi$_4$I$_4$ during the growth.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Emergent Topological Semimetal
Authors:
D. M. Kirschbaum,
L. Chen,
D. A. Zocco,
H. Hu,
F. Mazza,
J. Larrea Jiménez,
A. M. Strydom,
D. Adroja,
X. Yan,
A. Prokofiev,
Q. Si,
S. Paschen
Abstract:
A material's electronic topology, which is generally described via its Bloch states and the associated bandstructure, will be enriched by the presence of interactions. In metallic settings, the interactions are usually treated through the concept of quasiparticles. Using the genuinely quantum critical heavy fermion compound CeRu$_4$Sn$_6$, we investigate what happens if no well-defined quasipartic…
▽ More
A material's electronic topology, which is generally described via its Bloch states and the associated bandstructure, will be enriched by the presence of interactions. In metallic settings, the interactions are usually treated through the concept of quasiparticles. Using the genuinely quantum critical heavy fermion compound CeRu$_4$Sn$_6$, we investigate what happens if no well-defined quasiparticles are present. Surprisingly, we discover a topological semimetal phase that emerges from the material's quantum critical state and exhibits a dome structure as a function of magnetic field and pressure. To understand these results, we study a Weyl-Kondo semimetal model at a Kondo destruction quantum critical point. Indeed, it exhibits features in the spectral function that can define topological crossings beyond the quasiparticle picture. We expect our work to stimulate the search for other emergent topological phases.
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Near-critical dark opalescence in out-of-equilibrium SF$_6$
Authors:
Valentina Martelli,
Amaury Anquetil,
Lin Al Atik,
J. Larrea Jiménez,
Alaska Subedi,
Ricardo P. S. M. Lobo,
Kamran Behnia
Abstract:
The first-order phase transition between the liquid and gaseous phases ends at a critical point. Critical opalescence occurs at this singularity. Discovered in 1822, it is known to be driven by diverging fluctuations in the density. During the past two decades, boundaries between the gas-like and liquid-like regimes have been theoretically proposed and experimentally explored. Here, we show that f…
▽ More
The first-order phase transition between the liquid and gaseous phases ends at a critical point. Critical opalescence occurs at this singularity. Discovered in 1822, it is known to be driven by diverging fluctuations in the density. During the past two decades, boundaries between the gas-like and liquid-like regimes have been theoretically proposed and experimentally explored. Here, we show that fast cooling of near-critical sulfur hexafluoride (SF$_6$), in presence of Earth's gravity, favors dark opalescence, where visible photons are not merely scattered, but also absorbed. When the isochore fluid is quenched across the critical point, its optical transmittance drops by more than three orders of magnitude in the whole visible range, a feature which does not occur during slow cooling. We show that transmittance shows a dip at 2eV near the critical point, and the system can host excitons with binding energies ranging from 0.5 to 4 eV. The spinodal decomposition of the liquid-gas mixture, by inducing a periodical modulation of the fluid density, can provide a scenario to explain the emergence of this platform for coupling between light and matter. The possible formation of excitons and polaritons points to the irruption of quantum effects in a quintessentially classical context.
△ Less
Submitted 7 April, 2024;
originally announced April 2024.
-
Temperature dependence of the Raman spectrum of orthorhombic Bi2Se3
Authors:
Irene Mediavilla-Martinez,
Christian Kramberger,
Shabnam Dadgostar,
Juan Jimenez,
Paola Ayala,
Thomas Pichler,
Francisco J. Manjon,
Placida Rodriguez-Hernandez,
Alfonso Muñoz,
Nadezhda Serebryanaya,
Sergei Buga,
Jorge Serrano
Abstract:
Bismuth selenide, a benchmark topological insulator, grows in a trigonal structure at ambient conditions and exhibits a number of enticing properties related to the formation of Dirac surface states. Besides this polytype, a metastable orthorhombic modification with Pnma space group has been produced by electrodeposition and high-pressure high-temperature synthesis displaying upon Sb do** signif…
▽ More
Bismuth selenide, a benchmark topological insulator, grows in a trigonal structure at ambient conditions and exhibits a number of enticing properties related to the formation of Dirac surface states. Besides this polytype, a metastable orthorhombic modification with Pnma space group has been produced by electrodeposition and high-pressure high-temperature synthesis displaying upon Sb do** significant thermoelectric properties in the midtemperature range. However, very little experimental information is available on the fundamental properties of this polytype, such as, e.g., the electronic band gap and the lattice dynamics. We report here the temperature dependence of the Raman spectra of orthorhombic Bi2Se3 between 10 K and 300 K, which displays an anharmonic behavior of the optical phonons that can be modelled with a two-phonon decay channel. In order to analyze the data we performed ab initio calculations of the electronic bandstructure, the phonon frequencies at the center of the Brillouin zone, and the phonon dispersion relations along the main symmetry directions, examining the effect of spin-orbit coupling in both phonon and electronic energies. Lastly, we report here cathodoluminescence experiments at 83 K that set a lower limit to the electronic bandgap at 0.835 eV, pointing to an indirect nature, in agreement with our calculations. These results shed light to essential properties of orthorhombic Bi2Se3 for further understanding of the potential of this semiconductor for thermoelectrics and new applications.
△ Less
Submitted 11 February, 2024;
originally announced February 2024.
-
High temperature internal friction in a Ti-46Al-1Mo-0.2Si intermetallic, comparison with creep behaviour
Authors:
M. Castillo-Rodríguez,
M. L. No,
J. A. Jimenez,
O. A. Ruano,
J. San Juan
Abstract:
Advanced g-TiAl based intermetallics Mo-bearing have been developed to obtain the fine-grained microstructure required for superplastic deformation to be used during further processing. In the present work we have studied an alloy of Ti-46Al-1Mo-0.2Si (at%) with two different microstructures, as-cast material with a coarse grain size above 300 mm, and the hot extruded material exhibiting a grain s…
▽ More
Advanced g-TiAl based intermetallics Mo-bearing have been developed to obtain the fine-grained microstructure required for superplastic deformation to be used during further processing. In the present work we have studied an alloy of Ti-46Al-1Mo-0.2Si (at%) with two different microstructures, as-cast material with a coarse grain size above 300 mm, and the hot extruded material exhibiting a grain size smaller than 20 mm. We have used a mechanical spectrometer especially developed for high temperature internal friction measurements to study the defect mobility processes taking place at high temperature. The internal friction spectra at different frequencies has been studied and analyzed up to 1360 K in order to characterize the relaxation processes appearing in this temperature range. A relaxation peak, with a maximum in between 900 K and 1080 K, depending on the oscillating frequency, has been attributed to Ti-atoms diffusion by the stress-induced reorientation of Al-VTi-Al elastic dipoles. The high temperature background in both microstructural states, as-cast and extruded, has been analyzed, measuring the apparent activation parameters, in particular the apparent energies of Ecast(IF) 4.4 +- 0.05 eV and Eext(IF) 4.75 +- 0.05 eV respectively. These results have been compared to those obtained on the same materials by creep deformation. We may conclude that the activation parameters obtained by internal friction analysis, are consistent with the ones measured by creep. Furthermore, the analysis of the high temperature background allows establish the difference on creep resistance for both microstructural states
△ Less
Submitted 4 February, 2024;
originally announced February 2024.
-
Formation mechanisms of single-crystalline InN quantum dots fabricated via droplet epitaxy
Authors:
P. Aseev,
Ž. Gačević,
J. M. Mánuel,
J. J. Jiménez,
R. García,
F. M. Morales,
E. Calleja
Abstract:
This work presents an experimental and theoretical insight into formation mechanisms of single crystalline wurtzite InN quantum dots (QDs) fabricated via metal droplet epitaxy (DE) by employing plasma assisted molecular beam epitaxy. The applied procedure consists of two fabrication stages. During the first stage, the cold substrate (T = 15 °C) is exposed to an im**ing In flux, resulting in form…
▽ More
This work presents an experimental and theoretical insight into formation mechanisms of single crystalline wurtzite InN quantum dots (QDs) fabricated via metal droplet epitaxy (DE) by employing plasma assisted molecular beam epitaxy. The applied procedure consists of two fabrication stages. During the first stage, the cold substrate (T = 15 °C) is exposed to an im**ing In flux, resulting in formation of metallic In droplets on the substrate surface, and then to an im**ing active nitrogen flux, resulting in In conversion into polycrystalline InN islands. During the second stage, the substrate, which is still kept exposed to active nitrogen, is heated up to T = 300 °C, to allow for the reorganization of extended polycrystalline InN islands into groups of independent single crystalline wurtzite InN QDs. This work provides a detailed experimental insight into both fabrication stages and their qualitative explanations within the scopes of adatom surface kinetics (stage I) and total energy per unit crystal volume minimization (stage II). Finally, the formation mechanisms of InN QDs on the three different substrates (Si(111), Si(001) and In0.3Ga0.7N/Si(111)) are compared, and also linked to the formation mechanisms of other more studied nanostructures, such as self assembled GaN/AlN QDs and self assembled and selective area grown GaN nanowires.
△ Less
Submitted 31 January, 2024;
originally announced February 2024.
-
Inelastic neutron scattering investigation of the crystal field excitations of NdCo$_5$
Authors:
F. de Almeida Passos,
G. J. Nilsen,
C. E. Patrick,
M. D. Le,
G. Balakrishnan,
Santosh Kumar,
A. Thamizhavel,
D. R. Cornejo,
J. Larrea Jiménez
Abstract:
We present an inelastic neutron scattering study of the crystal electric field levels in the intermetallic ferrimagnets RECo$_{5}$ (RE = Nd and Y). In NdCo$_{5}$, measurements at $5~$K reveal two levels at approximately 28.9 and 52.9 meV. Crystal field calculations including the exchange field $B_{\textrm{exc}}$ from the Co sites account for both of these, as well as the spectrum at temperatures a…
▽ More
We present an inelastic neutron scattering study of the crystal electric field levels in the intermetallic ferrimagnets RECo$_{5}$ (RE = Nd and Y). In NdCo$_{5}$, measurements at $5~$K reveal two levels at approximately 28.9 and 52.9 meV. Crystal field calculations including the exchange field $B_{\textrm{exc}}$ from the Co sites account for both of these, as well as the spectrum at temperatures above the spin-reorientation transition at $\sim 280$~K. In particular, it is found that both a large hexagonal crystal field parameter $A_{6}^6\langle r^6 \rangle$ and $B_{\textrm{exc}}$ are required to reproduce the data, with the latter having a much larger value than that deduced from previous computational and experimental studies. Our study sheds light on the delicate interplay of terms in the rare-earth Hamiltonian of RECo$_5$ systems, and is therefore expected to stimulate further experimental and computational work on the broader family of rare-earth permanent magnets.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Investigation of role of antisite disorder in the pristine cage compound FeGa$_3$
Authors:
C. Kaufmann Ribeiro,
L. Mello,
V. Martelli,
D. Cornejo,
M. B. Silva Neto,
E. Fogh,
H. M. Rønnow,
J. Larrea Jiménez
Abstract:
The role of controlled disorder in the strong correlated narrow gap semiconductor candidate FeGa$_3$ has been investigated. Polycrystalline samples were synthesized by the combination of arc-melting furnace and successive annealing processes. Deviations of the occupation number of Fe and Ga sites from those expected in the pristine compound were quantified with X-ray analysis. Besides that, electr…
▽ More
The role of controlled disorder in the strong correlated narrow gap semiconductor candidate FeGa$_3$ has been investigated. Polycrystalline samples were synthesized by the combination of arc-melting furnace and successive annealing processes. Deviations of the occupation number of Fe and Ga sites from those expected in the pristine compound were quantified with X-ray analysis. Besides that, electrical transport and magnetization measurements reveal that hierarchy in Fe and Ga site disorder tunes the ground state of FeGa$_3$ from paramagnetic semiconducting to a magnetic metal. These findings are discussed within the framework of Anderson metal-insulator transitions and spin fluctuations.
△ Less
Submitted 25 March, 2023; v1 submitted 18 August, 2022;
originally announced August 2022.
-
Magnetic, electronic, and structural investigation of the strongly correlated Y$_{1-x}$Sm$_x$Co$_5$ system
Authors:
Fernando de Almeida Passos,
Daniel Cornejo,
Márcia Fantini,
Gøran J. Nilsen,
Valentina Martelli,
Julio Larrea Jiménez
Abstract:
SmCo$_5$ and YCo$_5$ are isostructural compounds both showing large magnetocrystalline anisotropy, where the former originates mainly from the crystal-electric field and magnetic interactions. We investigate the contribution of both interactions by partially substituting Y by Sm in as-cast polycrystalline Y$_{1-x}$Sm$_{x}$Co$_5$ (with $x$=0, 0.1, 0.2, 0.3, and 0.4) and measuring their structural,…
▽ More
SmCo$_5$ and YCo$_5$ are isostructural compounds both showing large magnetocrystalline anisotropy, where the former originates mainly from the crystal-electric field and magnetic interactions. We investigate the contribution of both interactions by partially substituting Y by Sm in as-cast polycrystalline Y$_{1-x}$Sm$_{x}$Co$_5$ (with $x$=0, 0.1, 0.2, 0.3, and 0.4) and measuring their structural, magnetic, and electrical properties through X-ray diffraction, magnetization, and electrical transport measurements. Our results suggest an interplay between microstructure strain in as-cast samples and the electronic and magnetic interactions.
△ Less
Submitted 17 August, 2022;
originally announced August 2022.
-
Thermal diffusivity and its lower bound in orthorhombic SnSe
Authors:
Valentina Martelli,
Fabio Abud,
Julio Larrea Jiménez,
Elisa Baggio-Saitovich,
Li-Dong Zhao,
Kamran Behnia
Abstract:
The orthorhombic monochalcogenide SnSe has attracted much attention in recent years as a promising high-temperature thermoelectric material. We present a study of its thermal conductivity and specific heat of SnSe between 2~K and 300~K and quantify its anisotropic thermal diffusivity, $D$. For both crystallographic orientations, thermal diffusivity remains above the recently identified Planckian l…
▽ More
The orthorhombic monochalcogenide SnSe has attracted much attention in recent years as a promising high-temperature thermoelectric material. We present a study of its thermal conductivity and specific heat of SnSe between 2~K and 300~K and quantify its anisotropic thermal diffusivity, $D$. For both crystallographic orientations, thermal diffusivity remains above the recently identified Planckian limit ($D > v_s^2 τ_P$, where $v_s$ is the sound velocity and $τ_P= \hbar/k_BT$) and its anisotropy in $D$ is set by the anisotropy of $v_s$. Comparison with cubic members of the IV-VI family leads to a consistent picture, where the diffusivity in all members of the family is set by the product of v$_s$, $τ_P$ and the 'melting' velocity derived from the melting temperature.
△ Less
Submitted 15 July, 2021; v1 submitted 28 April, 2021;
originally announced April 2021.
-
A quantum magnetic analogue to the critical point of water
Authors:
J. Larrea Jiménez,
S. P. G. Crone,
E. Fogh,
M. E. Zayed,
R. Lortz,
E. Pomjakushina,
K. Conder,
A. M. Läuchli,
L. Weber,
S. Wessel,
A. Honecker,
B. Normand,
Ch. Rüegg,
P. Corboz,
H. M. Rønnow,
F. Mila
Abstract:
At the familiar liquid-gas phase transition in water, the density jumps discontinuously at atmospheric pressure, but the line of these first-order transitions defined by increasing pressures terminates at the critical point, a concept ubiquitous in statistical thermodynamics. In correlated quantum materials, a critical point was predicted and measured terminating the line of Mott metal-insulator t…
▽ More
At the familiar liquid-gas phase transition in water, the density jumps discontinuously at atmospheric pressure, but the line of these first-order transitions defined by increasing pressures terminates at the critical point, a concept ubiquitous in statistical thermodynamics. In correlated quantum materials, a critical point was predicted and measured terminating the line of Mott metal-insulator transitions, which are also first-order with a discontinuous charge density. In quantum spin systems, continuous quantum phase transitions (QPTs) have been investigated extensively, but discontinuous QPTs have received less attention. The frustrated quantum antiferromagnet SrCu$_2$(BO$_3$)$_2$ constitutes a near-exact realization of the paradigmatic Shastry-Sutherland model and displays exotic phenomena including magnetization plateaux, anomalous thermodynamics and discontinuous QPTs. We demonstrate by high-precision specific-heat measurements under pressure and applied magnetic field that, like water, the pressure-temperature phase diagram of SrCu$_2$(BO$_3$)$_2$ has an Ising critical point terminating a first-order transition line, which separates phases with different densities of magnetic particles (triplets). We achieve a quantitative explanation of our data by detailed numerical calculations using newly-developed finite-temperature tensor-network methods. These results open a new dimension in understanding the thermodynamics of quantum magnetic materials, where the anisotropic spin interactions producing topological properties for spintronic applications drive an increasing focus on first-order QPTs.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
Quantum Double Models coupled to matter fields: a detailed review for a dualization procedure
Authors:
M. F. Araujo de Resende,
J. P. Ibieta Jimenez,
J. Lorca Espiro
Abstract:
In this paper, we investigate how it is possible to define a new class of lattice gauge models based on a dualization procedure of a previous generalization of the Kitaev Quantum Double Models. In the case of this previous generalization that will be used as a basis, it was defined by adding new qudits (which were denoted as matter fields in reference to some works) to the lattice vertices with th…
▽ More
In this paper, we investigate how it is possible to define a new class of lattice gauge models based on a dualization procedure of a previous generalization of the Kitaev Quantum Double Models. In the case of this previous generalization that will be used as a basis, it was defined by adding new qudits (which were denoted as matter fields in reference to some works) to the lattice vertices with the intention of, for instance, interpreting its models as Kitaev Quantum Double Models coupled with Potts ones. Now, with regard to the generalization that we investigate here, which we want to define as the dual of this previous one, these new qudits were added to the lattice faces. And as the coupling between gauge and matter qudits of the previous generalization was performed by a gauge group action, we show that the dual behaviour of these two generalizations was achieved by coupling these same qudits in the second one through a gauge group co-action homomorphism. One of the most striking dual aspects of these two generalizations is that, in both, part of the quasiparticles that were inherited from the Kitaev Quantum Double Models become confined when these action and co-action are non-trivial. But the big news here is that, in addition to the group homomorphism (that defines this gauge group co-action) allows us to classify all the different models of this second generalization, this same group homomorphism also suggests that all these models can be interpreted as two-dimensional restrictions of the $ 2 $-lattice gauge theories.
△ Less
Submitted 11 January, 2023; v1 submitted 3 April, 2019;
originally announced April 2019.
-
Non-Abelian fusion rules from Abelian systems with SPT phases and graph topological order
Authors:
M. F. Araujo de Resende,
J. P. Ibieta Jimenez,
J. Lorca Espiro
Abstract:
Since Ref. [1] shows the emergence of non-Abelian fusion rules in some examples of a class of Abelian models, but does not prove whether these rules also exist in other cases, the purpose of this paper is to present such proof emphasizing the importance of the existence of these rules. By the way, as the ground state of these models can be degenerate as a function of their algebra and, hence, they…
▽ More
Since Ref. [1] shows the emergence of non-Abelian fusion rules in some examples of a class of Abelian models, but does not prove whether these rules also exist in other cases, the purpose of this paper is to present such proof emphasizing the importance of the existence of these rules. By the way, as the ground state of these models can be degenerate as a function of their algebra and, hence, they can support some symmetry-protected topological (SPT) phases, we prove that these non-Abelian fusion rules are always necessary for these SPT phase transitions to occur via a condensation mechanism or/and some global symmetry breaking.
△ Less
Submitted 14 August, 2022; v1 submitted 8 August, 2018;
originally announced August 2018.
-
Thermal transport and phonon hydrodynamics in strontium titanate
Authors:
Valentina Martelli,
Julio Larrea Jiménez,
Mucio Continentino,
Elisa Baggio-Saitovitch,
Kamran Behnia
Abstract:
We present a study of thermal conductivity, $κ$, in undoped and doped strontium titanate in a wide temperature range (2-400 K) and detecting different regimes of heat flow. In undoped SrTiO$_{3}$, $κ$ evolves faster than cubic with temperature below its peak and in a narrow temperature window. Such a behavior, previously observed in a handful of solids, has been attributed to a Poiseuille flow of…
▽ More
We present a study of thermal conductivity, $κ$, in undoped and doped strontium titanate in a wide temperature range (2-400 K) and detecting different regimes of heat flow. In undoped SrTiO$_{3}$, $κ$ evolves faster than cubic with temperature below its peak and in a narrow temperature window. Such a behavior, previously observed in a handful of solids, has been attributed to a Poiseuille flow of phonons, expected to arise when momentum-conserving scattering events outweigh momentum-degrading ones. The effect disappears in presence of dopants. In SrTi$_{1-x}$Nb$_{x}$O$_{3}$, a significant reduction in lattice thermal conductivity starts below the temperature at which the average interdopant distance and the thermal wavelength of acoustic phonons become comparable. In the high-temperature regime, thermal diffusivity becomes proportional to the inverse of temperature, with a prefactor set by sound velocity and Planckian time ($τ_{p}=\frac{\hbar}{k_{B}T}$).
△ Less
Submitted 27 March, 2018; v1 submitted 16 February, 2018;
originally announced February 2018.
-
Inverted anisotropy in the in-plane dissipation of BSCCO tapes: preliminary results
Authors:
A. S. García-Gordillo,
D. Antunez,
E. Altshuler,
J. Jiménez,
C. F. Sánchez-Valdés
Abstract:
The electrical properties of superconducting tapes and coatings in the direction transverse to the long dimension of the composite has been rarely studied. However, transverse dissipation can eventually determine the behavior of a transmission line in the case of failure due to the presence of transversal cracks, and is also fundamental in the AC regime. In this paper we present a preliminary expe…
▽ More
The electrical properties of superconducting tapes and coatings in the direction transverse to the long dimension of the composite has been rarely studied. However, transverse dissipation can eventually determine the behavior of a transmission line in the case of failure due to the presence of transversal cracks, and is also fundamental in the AC regime. In this paper we present a preliminary experimental study of the electrical transport properties along the transverse direction of BSCCO-metal tapes, and compare them with those measured along the long axis of the material. In spite of the fact that the tapes under study are not multi-filamentary, our experiments suggest that there is a measurable anisotropy of the transport properties between the longitudinal and transverse directions.
△ Less
Submitted 27 September, 2016;
originally announced September 2016.
-
GaAs/GaP quantum dots: Ensemble of direct and indirect heterostructures with room temperature optical emission
Authors:
S. Dadgostar,
J. Schmidtbauer,
T. Boeck,
A. Torres,
O. Martínez,
J. Jiménez,
J. W. Tomm,
A. Mogilatenko,
W. T. Masselink,
F. Hatami
Abstract:
We describe the optical emission and the carrier dynamics of an ensemble of self-assembled GaAs quantum dots embedded in GaP(001). The QD formation is driven by the 3.6 % lattice mismatch between GaAs and GaP in Stranski-Krastanow mode after deposition of more than 1.2 monolayers of GaAs. The quantum dots have an areal density between 6 and 7.6x1010 per cm-2 and multimodal size distribution. The l…
▽ More
We describe the optical emission and the carrier dynamics of an ensemble of self-assembled GaAs quantum dots embedded in GaP(001). The QD formation is driven by the 3.6 % lattice mismatch between GaAs and GaP in Stranski-Krastanow mode after deposition of more than 1.2 monolayers of GaAs. The quantum dots have an areal density between 6 and 7.6x1010 per cm-2 and multimodal size distribution. The luminescence spectra show two peaks in the range of 1.7 and 2.1 eV. The samples with larger quantum dots have red emission and show less thermal quenching compared to the samples with smaller QDs. The large QDs luminescence up to room temperature. We attribute the high energy emission to indirect carrier recombination in the thin quantum wells or small strained quantum dots, whereas the low energy red emission is due to the direct electron-hole recombination in the relaxed quantum dots.
△ Less
Submitted 8 December, 2015;
originally announced December 2015.
-
A Recipe for Constructing Frustration-Free Hamiltonians with Gauge and Matter Fields in One and Two Dimensions
Authors:
Miguel Jorge Bernabé Ferreira,
Juan Pablo Ibieta Jimenez,
Pramod Padmanabhan,
Paulo Teotonio-Sobrinho
Abstract:
State sum constructions, such as Kuperberg's algorithm, give partition functions of physical systems, like lattice gauge theories, in various dimensions by associating local tensors or weights, to different parts of a closed triangulated manifold. Here we extend this construction by including matter fields to build partition functions in both two and three space-time dimensions. The matter fields…
▽ More
State sum constructions, such as Kuperberg's algorithm, give partition functions of physical systems, like lattice gauge theories, in various dimensions by associating local tensors or weights, to different parts of a closed triangulated manifold. Here we extend this construction by including matter fields to build partition functions in both two and three space-time dimensions. The matter fields introduces new weights to the vertices and they correspond to Potts spin configurations described by an $\mathcal{A}$-module with an inner product. Performing this construction on a triangulated manifold with a boundary we obtain the transfer matrices which are decomposed into a product of local operators acting on vertices, links and plaquettes. The vertex and plaquette operators are similar to the ones appearing in the quantum double models (QDM) of Kitaev. The link operator couples the gauge and the matter fields, and it reduces to the usual interaction terms in known models such as $\mathbb{Z}_2$ gauge theory with matter fields. The transfer matrices lead to Hamiltonians that are frustration-free and are exactly solvable. According to the choice of the initial input, that of the gauge group and a matter module, we obtain interesting models which have a new kind of ground state degeneracy that depends on the number of equivalence classes in the matter module under gauge action. Some of the models have confined flux excitations in the bulk which become deconfined at the surface. These edge modes are protected by an energy gap provided by the link operator. These properties also appear in "confined Walker-Wang" models which are 3D models having interesting surface states. Apart from the gauge excitations there are also excitations in the matter sector which are immobile and can be thought of as defects like in the Ising model. We only consider bosonic matter fields in this paper.
△ Less
Submitted 5 October, 2015; v1 submitted 25 March, 2015;
originally announced March 2015.
-
Deformed quantum double realization of the toric code and beyond
Authors:
Pramod Padmanabhan,
Juan Pablo Ibieta Jimenez,
Miguel Jorge Bernabé Ferreira,
Paulo Teotonio-Sobrinho
Abstract:
Quantum double models, such as the toric code, can be constructed from transfer matrices of lattice gauge theories with discrete gauge groups and parametrized by the center of the gauge group algebra and its dual. For general choices of these parameters the transfer matrix contains operators acting on links which can also be thought of as perturbations to the quantum double model driving it out of…
▽ More
Quantum double models, such as the toric code, can be constructed from transfer matrices of lattice gauge theories with discrete gauge groups and parametrized by the center of the gauge group algebra and its dual. For general choices of these parameters the transfer matrix contains operators acting on links which can also be thought of as perturbations to the quantum double model driving it out of its topological phase and destroying the exact solvability of the quantum double model. We modify these transfer matrices with perturbations and extract exactly solvable models which remain in a quantum phase, thus nullifying the effect of the perturbation. The algebra of the modified vertex and plaquette operators now obey a deformed version of the quantum double algebra. The Abelian cases are shown to be in the quantum double phase whereas the non-Abelian phases are shown to be in a modified phase of the corresponding quantum double phase. These are illustrated with the groups $\mathbb{Z}_n$ and $S_3$. The quantum phases are determined by studying the excitations of these systems namely their fusion rules and the statistics. We then go further to construct a transfer matrix which contains the other $\mathbb{Z}_2$ phase namely the double semion phase. More generally for other discrete groups these transfer matrices contain the twisted quantum double models. These transfer matrices can be thought of as being obtained by introducing extra parameters into the transfer matrix of lattice gauge theories. These parameters are central elements belonging to the tensor products of the algebra and its dual and are associated to vertices and volumes of the three dimensional lattice. As in the case of the lattice gauge theories we construct the operators creating the excitations in this case and study their braiding and fusion properties.
△ Less
Submitted 10 December, 2015; v1 submitted 11 August, 2014;
originally announced August 2014.
-
Nanoscale austenite reversion through partitioning, segregation, and kinetic freezing: Example of a ductile 2 GPa Fe-Cr-C steel
Authors:
L. Yuan,
D. Ponge,
J. Wittig,
P. Choi,
J. A. Jiménez,
D. Raabe
Abstract:
Austenite reversion during tempering of a Fe-13.6Cr-0.44C (wt.%) martensite results in an ultrahigh strength ferritic stainless steel with excellent ductility. The austenite reversion mechanism is coupled to the kinetic freezing of carbon during low-temperature partitioning at the interfaces between martensite and retained austenite and to carbon segregation at martensite-martensite grain boundari…
▽ More
Austenite reversion during tempering of a Fe-13.6Cr-0.44C (wt.%) martensite results in an ultrahigh strength ferritic stainless steel with excellent ductility. The austenite reversion mechanism is coupled to the kinetic freezing of carbon during low-temperature partitioning at the interfaces between martensite and retained austenite and to carbon segregation at martensite-martensite grain boundaries. An advantage of austenite reversion is its scalability, i.e., changing tempering time and temperature tailors the desired strength-ductility profiles (e.g. tempering at 400°C for 1 min. produces a 2 GPa ultimate tensile strength (UTS) and 14% elongation while 30 min. at 400°C results in a UTS of ~ 1.75 GPa with an elongation of 23%). The austenite reversion process, carbide precipitation, and carbon segregation have been characterized by XRD, EBSD, TEM, and atom probe tomography (APT) in order to develop the structure-property relationships that control the material's strength and ductility.
△ Less
Submitted 19 February, 2012;
originally announced February 2012.
