Showing 1–50 of 105 results for author: Jaeger, M

Statistical mechanics of crystal nuclei of hard spheres

Authors: Marjolein de Jager, Carlos Vega, Pablo Montero de Hijes, Frank Smallenburg, Laura Filion

Abstract: In the study of crystal nucleation via computer simulations, hard spheres are arguably the most extensively explored model system. Nonetheless, even in this simple model system, the complex thermodynamics of crystal nuclei can sometimes give rise to counterintuitive results, such as the recent observation that the pressure inside a critical nucleus is lower than that of the surrounding fluid, seem… ▽ More In the study of crystal nucleation via computer simulations, hard spheres are arguably the most extensively explored model system. Nonetheless, even in this simple model system, the complex thermodynamics of crystal nuclei can sometimes give rise to counterintuitive results, such as the recent observation that the pressure inside a critical nucleus is lower than that of the surrounding fluid, seemingly clashing with the strictly positive Young--Laplace pressure we would expect in liquid droplets. Here, we re-derive many of the founding equations associated with crystal nucleation, and use the hard-sphere model to demonstrate how they give rise to this negative pressure difference. We exploit the fact that, in the canonical ensemble, a nucleus can be in a (meta)stable equilibrium with the fluid, and measure the surface stress for both flat and curved interfaces. Additionally, we explain the effect of defects on the chemical potential inside the crystal nucleus. Lastly, we present a simple, fitted thermodynamic model to capture the properties of the nucleus, including the work required to form critical nuclei. △ Less

Submitted 5 July, 2024; originally announced July 2024.

Direct measurement of forces in air-based acoustic levitation systems

Authors: Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger

Abstract: Acoustic levitation is frequently used for non-contact manipulation of objects and to study the impact of microgravity on physical and biological processes. While the force field produced by sound pressure lifts particles against gravity (primary acoustic force), multiple levitating objects in the same acoustic cavity interact via forces that arise from scattered sound (secondary acoustic forces).… ▽ More Acoustic levitation is frequently used for non-contact manipulation of objects and to study the impact of microgravity on physical and biological processes. While the force field produced by sound pressure lifts particles against gravity (primary acoustic force), multiple levitating objects in the same acoustic cavity interact via forces that arise from scattered sound (secondary acoustic forces). Current experimental techniques for obtaining these force fields are not well-suited for map** the primary force field at high spatial resolution and cannot directly measure the secondary scattering force. Here we introduce a method that can measure both acoustic forces in situ, including secondary forces in the near-field limit between arbitrarily shaped, closely spaced objects. Operating similarly to an atomic force microscope, the method inserts into the acoustic cavity a suitably shaped probe tip at the end of a long, flexible cantilever and optically detects its deflection. This makes it possible to measure forces with a resolution better than 50 nN, and also to apply stress or strain in a controlled manner to manipulate levitated objects. We demonstrate this by extracting the acoustic potential present in a levitation cavity, directly measuring the acoustic scattering force between two objects, and applying tension to a levitated granular raft of acoustically-bound particles in order to obtain the force-displacement curve for its deformation. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: The following article has been submitted to Review of Scientific Instruments

Shear thickening in suspensions of particles with dynamic brush layers

Authors: Ho** Kim, Michael van der Naald, Finn A. Braaten, Thomas A. Witten, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: Control of frictional interactions among liquid-suspended particles has led to tunable, strikingly non-Newtonian rheology via the formation of strong flow constraints as particles come into close proximity under shear. Typically, these frictional interactions have been in the form of physical contact, controllable via particle shape and surface roughness. We investigate a different route, where mo… ▽ More Control of frictional interactions among liquid-suspended particles has led to tunable, strikingly non-Newtonian rheology via the formation of strong flow constraints as particles come into close proximity under shear. Typically, these frictional interactions have been in the form of physical contact, controllable via particle shape and surface roughness. We investigate a different route, where molecular bridging between nearby particle surfaces generates a controllable "sticky" friction. This is achieved with surface-functionalized colloidal particles capable of forming dynamic covalent bonds with telechelic polymers that comprise the suspending fluid. At low shear stress this results in particles coated with a uniform polymer brush layer. Beyond an onset stress the telechelic polymers become capable of bridging and generate shear thickening. Over the size range investigated, we find that the dynamic brush layer leads to dependence of the onset stress on particle diameter that closely follows a power law with exponent -1.76. In the shear thickening regime, we observe an enhanced dilation in measurements of the first normal stress difference and reduction in the extrapolated volume fraction required for jamming, both consistent with an effective particle friction that increases with decreasing particle diameter. These results are discussed in light of predictions for suspensions of hard spheres and of polymer-grafted particles. △ Less

Submitted 10 June, 2024; originally announced June 2024.

A simple and accurate method to determine fluid-crystal phase boundaries from direct coexistence simulations

Authors: Frank Smallenburg, Giovanni Del Monte, Marjolein de Jager, Laura Filion

Abstract: One method for computationally determining phase boundaries is to explicitly simulate a direct coexistence between the two phases of interest. Although this approach works very well for fluid-fluid coexistences, it is often considered to be less useful for fluid-crystal transitions, as additional care must be taken to prevent the simulation boundaries from imposing unwanted strains on the crystal… ▽ More One method for computationally determining phase boundaries is to explicitly simulate a direct coexistence between the two phases of interest. Although this approach works very well for fluid-fluid coexistences, it is often considered to be less useful for fluid-crystal transitions, as additional care must be taken to prevent the simulation boundaries from imposing unwanted strains on the crystal phase. Here, we present a simple adaptation to the direct coexistence method that nonetheless allows us to obtain highly accurate predictions of fluid-crystal coexistence conditions. We test our approach on hard spheres, the screened Coulomb potential, and a 2D patchy-particle model. In all cases, we find excellent agreement between the direct coexistence approach and (much more cumbersome) free-energy calculation methods. Moreover, the method is sufficiently accurate to resolve the (tiny) free-energy difference between the face-centered cubic and hexagonally close-packed crystal of hard spheres in the thermodynamic limit. The simplicity of this method also ensures that it can be trivially implemented in essentially any simulation method or package. Hence, this approach provides an excellent alternative to free-energy based methods for the precise determination of phase boundaries. △ Less

Submitted 16 March, 2024; originally announced March 2024.

Comments: Consists of a manuscript, SI, and sample LAMMPS script

Training physical matter to matter

Authors: Heinrich M. Jaeger, Arvind Murugan, Sidney R. Nagel

Abstract: Biological systems offer a great many examples of how sophisticated, highly adapted behavior can emerge from training. Here we discuss how training might be used to impart similarly adaptive properties in physical matter. As a special form of materials processing, training differs in important ways from standard approaches of obtaining sought after material properties. In particular, rather than d… ▽ More Biological systems offer a great many examples of how sophisticated, highly adapted behavior can emerge from training. Here we discuss how training might be used to impart similarly adaptive properties in physical matter. As a special form of materials processing, training differs in important ways from standard approaches of obtaining sought after material properties. In particular, rather than designing or programming the local configurations and interactions of constituents, training uses externally applied stimuli to evolve material properties. This makes it possible to obtain different functionalities from the same starting material (pluripotency). Furthermore, training evolves a material in-situ or under conditions similar to those during the intended use; thus, material performance can improve rather than degrade over time. We discuss requirements for trainability, outline recently developed training strategies for creating soft materials with multiple, targeted and adaptable functionalities, and provide examples where the concept of training has been applied to materials on length scales from the molecular to the macroscopic. △ Less

Submitted 9 March, 2024; originally announced March 2024.

Comments: 1 figure, 60 references

Learning protein-ligand unbinding pathways via single-parameter community detection

Authors: Victor Tänzel, Miriam Jäger, Steffen Wolf

Abstract: Understanding the dynamics of biomolecular complexes, e.g., of protein-ligand (un)binding, requires the understanding of paths such systems take between metastable states. In MD simulation data, paths are usually not observable per se, but need to be inferred from simulation trajectories. Here we present a novel approach to cluster trajectories based on a community detection algorithm that require… ▽ More Understanding the dynamics of biomolecular complexes, e.g., of protein-ligand (un)binding, requires the understanding of paths such systems take between metastable states. In MD simulation data, paths are usually not observable per se, but need to be inferred from simulation trajectories. Here we present a novel approach to cluster trajectories based on a community detection algorithm that requires the definition of only a single free parameter. Using the streptavidin-biotin complex as benchmark system and the A\textsubscript{2a} adenosine receptor in complex with the inhibitor ZM241385 as an elaborate application, we demonstrate how such clusters of trajectories correspond to pathways, and how the approach helps in the identification of reaction coordinates for a considered (un)binding process. △ Less

Submitted 2 July, 2024; v1 submitted 10 February, 2024; originally announced February 2024.

Comments: This preprint is the unedited version of a manuscript that has been published as peer-reviewed article by J. Chem. Theory Comput. and can be downloaded for private use only. Copyright with the journal, ACS and the authors

Journal ref: J. Chem. Theory Comput. 20, 5058-5067 (2024)

Acoustic manipulation of multi-body structures and dynamics

Authors: Melody X. Lim, Bryan VanSaders, Heinrich M. Jaeger

Abstract: Sound can exert forces on objects of any material and shape. This has made the contactless manipulation of objects by intense ultrasound a fascinating area of research with wide-ranging applications. While much is understood for acoustic forcing of individual objects, sound-mediated interactions among multiple objects at close range gives rise to a rich set of structures and dynamics that are less… ▽ More Sound can exert forces on objects of any material and shape. This has made the contactless manipulation of objects by intense ultrasound a fascinating area of research with wide-ranging applications. While much is understood for acoustic forcing of individual objects, sound-mediated interactions among multiple objects at close range gives rise to a rich set of structures and dynamics that are less explored and have been emerging as a frontier for research. We introduce the basic mechanisms giving rise to sound-mediated interactions among rigid as well as deformable particles, focusing on the regime where the particles' size and spacing are much smaller than the sound wavelength. The interplay of secondary acoustic scattering, Bjerknes forces, and micro-streaming is discussed and the role of particle shape is highlighted. Furthermore, we present recent advances in characterizing non-conservative and non-pairwise additive contributions to the particle interactions, along with instabilities and active fluctuations. These excitations emerge at sufficiently strong sound energy density and can act as an effective temperature in otherwise athermal systems. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Rheology of bidisperse non-Brownian suspensions

Authors: Abhinendra Singh, Christopher Ness, Abhishek K. Sharma, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: We study the rheology of bidisperse non-Brownian suspensions using particle-based simulation, map** the viscosity as a function of the size ratio of the species, their relative abundance, and the overall solid content. The variation of the viscosity with applied stress exhibits shear thickening phenomenology irrespective of composition, though the stress-dependent limiting solids fraction govern… ▽ More We study the rheology of bidisperse non-Brownian suspensions using particle-based simulation, map** the viscosity as a function of the size ratio of the species, their relative abundance, and the overall solid content. The variation of the viscosity with applied stress exhibits shear thickening phenomenology irrespective of composition, though the stress-dependent limiting solids fraction governing the viscosity and its divergence point are non-monotonic in the mixing ratio. Contact force data demonstrate an asymmetric exchange in dominant stress contribution from large-large to small-small particle contacts as the mixing ratio of the species evolves. Combining a prior model for shear thickening with one for composition-dependent jamming, we obtain a full description of the rheology of bidisperse non-Brownian suspensions capable of predicting effects such as the viscosity reduction observed upon adding small particle fines to a suspension of large particles. △ Less

Submitted 31 May, 2024; v1 submitted 9 November, 2023; originally announced November 2023.

Comments: 5 pages, 4 figures

Precise photoexcitation measurement of Tan's contact in the entire BCS-BEC crossover

Authors: Manuel Jäger, Johannes Hecker Denschlag

Abstract: We study two-body correlations in a spin-balanced ultracold harmonically trapped Fermi gas of $^6$Li atoms in the crossover from the Bardeen-Cooper-Schrieffer (BCS) to the Bose-Einstein-Condensate (BEC) regime. For this, we precisely measure Tan's contact using a novel method based on photoexcitation of atomic pairs, which was recently proposed by Wang et al. [Phys. Rev. A 104 063309 (2021)]. We m… ▽ More We study two-body correlations in a spin-balanced ultracold harmonically trapped Fermi gas of $^6$Li atoms in the crossover from the Bardeen-Cooper-Schrieffer (BCS) to the Bose-Einstein-Condensate (BEC) regime. For this, we precisely measure Tan's contact using a novel method based on photoexcitation of atomic pairs, which was recently proposed by Wang et al. [Phys. Rev. A 104 063309 (2021)]. We map out the contact in the entire phase diagram of the BCS-BEC crossover for various temperatures and interaction strengths, probing regions in phase-space that have not been investigated yet. Our measurements reach an uncertainty of $\approx 2 \%$ and thus represent a precise quantitative benchmark. We compare our data to theoretical predictions and interpolations and localize the regions in phase space where the latter give valid results. In regions where the contact is already well known we find excellent agreement with our measurements. Thus, our results demonstrate that photoinduced loss is a precise probe to measure quantum correlations in a strongly interacting Fermi gas. △ Less

Submitted 29 September, 2023; originally announced September 2023.

Comments: 5 pages, 3 figures

In search of a precursor for crystal nucleation of hard and charged colloids

Authors: Marjolein de Jager, Frank Smallenburg, Laura Filion

Abstract: The interplay between crystal nucleation and the structure of the metastable fluid has been a topic of significant debate over recent years. In particular, it has been suggested that even in simple model systems such as hard or charged colloids, crystal nucleation might be foreshadowed by significant fluctuations in local structure around the location where the first nucleus arises. We investigate… ▽ More The interplay between crystal nucleation and the structure of the metastable fluid has been a topic of significant debate over recent years. In particular, it has been suggested that even in simple model systems such as hard or charged colloids, crystal nucleation might be foreshadowed by significant fluctuations in local structure around the location where the first nucleus arises. We investigate this using computer simulations of spontaneous nucleation events in both hard and charged colloidal particles. To detect local structural variations, we use both standard and unsupervised machine learning methods capable of finding hidden structures in the metastable fluid phase. We track numerous nucleation events for the face-centered cubic and body-centered cubic crystal on a local level, and demonstrate that all signs of crystallinity emerge simultaneously from the very start of the nucleation process. We thus conclude that there is no precursor for the nucleation of charged colloids. △ Less

Submitted 9 June, 2023; originally announced June 2023.

A New Approach to Measure Fundamental Microstructural Influences on the Magnetic Properties of Electrical Steel using a Miniaturized Single Sheet Tester

Authors: Nora Leuning, Martin Heller, Markus Jaeger, Sandra Korte-Kerzel, Kay Hameyer

Abstract: Magnetic properties of electrical steel are usually measured on Single Sheet Testers, Epstein frames or ring cores. Due to the geometric dimensions and measurement principles of these standardized setups, the fundamental microstructural influences on the magnetic behavior, e.g., deformation structures, crystal orientation or grain boundaries, are difficult to separate and quantify. In this paper,… ▽ More Magnetic properties of electrical steel are usually measured on Single Sheet Testers, Epstein frames or ring cores. Due to the geometric dimensions and measurement principles of these standardized setups, the fundamental microstructural influences on the magnetic behavior, e.g., deformation structures, crystal orientation or grain boundaries, are difficult to separate and quantify. In this paper, a miniaturized Single Sheet Tester is presented that allows the characterization of industrial steel sheets as well as from in size limited single, bi- and oligocrystals starting from samples with dimensions of 10x22 mm. Thereby, the measurement of global magnetic properties is coupled with microstructural analysis methods to allow the investigation of micro scale magnetic effects. An effect of grain orientation, grain boundaries and deformation structures has already been identified with the presented experimental setup. In addition, a correction function is introduced to allow quantitative comparisons between differently sized Single Sheet Testers. This approach is not limited to the presented Single Sheet Tester geometry, but applicable for the comparison of results of differently sized Single Sheet Testers. The results of the miniaturized Single Sheet Tester were validated on five industrial electrical steel grades. Furthermore, first results of differently oriented single crystals as well as measurements on grain-oriented electrical steel are shown to prove the additional value of the miniaturized Single Sheet Tester geometry. △ Less

Submitted 6 June, 2023; originally announced June 2023.

Holographic imaging of an array of submicron light scatterers at low photon numbers

Authors: Sebastian Kölle, Manuel Jäger, Markus Müller, Wladimir Schoch, Wolfgang Limmer, Johannes Hecker Denschlag

Abstract: We experimentally test a recently proposed holographic method for imaging coherent light scatterers which are distributed over a 2-dimensional grid. In our setup the scatterers consist of a back-illuminated, opaque mask with submicron-sized holes. We study how the imaging fidelity depends on various parameters of the set-up. We observe that a few hundred scattered photons per hole already suffice… ▽ More We experimentally test a recently proposed holographic method for imaging coherent light scatterers which are distributed over a 2-dimensional grid. In our setup the scatterers consist of a back-illuminated, opaque mask with submicron-sized holes. We study how the imaging fidelity depends on various parameters of the set-up. We observe that a few hundred scattered photons per hole already suffice to obtain a fidelity of 96% to correctly determine whether a hole is located at a given grid point. The holographic method demonstrated here has a high potential for applications with ultracold atoms in optical lattices. △ Less

Submitted 21 November, 2023; v1 submitted 22 May, 2023; originally announced May 2023.

Comments: 8 pages, 9 figures

Journal ref: Appl. Phys. B 129, 180 (2023)

A self-organizing robotic aggregate using solid and liquid-like collective states

Authors: Baudouin Saintyves, Matthew Spenko, Heinrich M. Jaeger

Abstract: Designing robotic systems that can change their physical form factor as well as their compliance to adapt to environmental constraints remains a major conceptual and technical challenge. To address this, we introduce the Granulobot, a modular system that blurs the distinction between soft, modular, and swarm robotics. The system consists of gear-like units that each contain a single actuator such… ▽ More Designing robotic systems that can change their physical form factor as well as their compliance to adapt to environmental constraints remains a major conceptual and technical challenge. To address this, we introduce the Granulobot, a modular system that blurs the distinction between soft, modular, and swarm robotics. The system consists of gear-like units that each contain a single actuator such that units can self-assemble into larger, granular aggregates using magnetic coupling. These aggregates can reconfigure dynamically and also split up into subsystems that might later recombine. Aggregates can self-organize into collective states with solid- and liquid-like properties, thus displaying widely differing compliances. These states can be perturbed locally via actuators or externally via mechanical feedback from the environment to produce adaptive shape shifting in a decentralized manner. This in turn can generate locomotion strategies adapted to different conditions. Aggregates can move over obstacles without using external sensors or coordinate to maintain a steady gait over different surfaces without electronic communication among units. The modular design highlights a physical, morphological form of control that advances the development of resilient robotic systems with the ability to morph and adapt to different functions and conditions. △ Less

Submitted 28 August, 2023; v1 submitted 6 April, 2023; originally announced April 2023.

Comments: 42 pages, 8 figures

Updates to the DScribe Library: New Descriptors and Derivatives

Authors: Jarno Laakso, Lauri Himanen, Henrietta Homm, Eiaki V. Morooka, Marc O. J. Jäger, Milica Todorović, Patrick Rinke

Abstract: We present an update of the DScribe package, a Python library for atomistic descriptors. The update extends DScribe's descriptor selection with the Valle-Oganov materials fingerprint and provides descriptor derivatives to enable more advanced machine learning tasks, such as force prediction and structure optimization. For all descriptors, numeric derivatives are now available in DSribe. For the ma… ▽ More We present an update of the DScribe package, a Python library for atomistic descriptors. The update extends DScribe's descriptor selection with the Valle-Oganov materials fingerprint and provides descriptor derivatives to enable more advanced machine learning tasks, such as force prediction and structure optimization. For all descriptors, numeric derivatives are now available in DSribe. For the many-body tensor representation (MBTR) and the Smooth Overlap of Atomic Positions (SOAP), we have also implemented analytic derivatives. We demonstrate the effectiveness of the descriptor derivatives for machine learning models of Cu clusters and perovskite alloys. △ Less

Submitted 24 March, 2023; originally announced March 2023.

Comments: The following article has been submitted to The Journal of Chemical Physics. After it is published, it will be found at https://aip.scitation.org/toc/jcp/current

Hydrodynamic Coupling Melts Acoustically Levitated Crystalline Rafts

Authors: Brady Wu, Bryan VanSaders, Melody X. Lim, Heinrich M. Jaeger

Abstract: The acoustic levitation of small particles provides a versatile platform to investigate the collective dynamical properties of self-assembled many-body systems in the presence of hydrodynamic coupling. However, acoustic scattering forces can only generate attractive interactions at close range in the levitation plane, limiting self-assembly to rafts where particles come into direct, dissipative, c… ▽ More The acoustic levitation of small particles provides a versatile platform to investigate the collective dynamical properties of self-assembled many-body systems in the presence of hydrodynamic coupling. However, acoustic scattering forces can only generate attractive interactions at close range in the levitation plane, limiting self-assembly to rafts where particles come into direct, dissipative, contact. Here, we overcome this limitation by using particles small enough that the viscosity of air establishes a repulsive streaming flow at close range. By tuning the size of particles relative to the characteristic length scale of the viscous flow, we control the interplay between attractive and repulsive forces. In this novel granular raft, particles form an open lattice with tunable spacing. Hydrodynamic coupling between particles gives rise to spontaneous excitations in the lattice, in turn driving intermittent particle rearrangements. Under the action of these fluctuations, the raft transitions from a predominantly quiescent, crystalline structure, to a two-dimensional liquid-like state. We show that this transition is characterized by dynamic heterogeneity and intermittency, as well as cooperative particle movements, that produce an effectively `cageless' crystal. These findings shed light on fluid-coupling driven excitations that are difficult to isolate and control in many other hydrodynamic systems. △ Less

Submitted 4 November, 2022; originally announced November 2022.

Acoustically levitated lock and key grains

Authors: Melody X. Lim, Heinrich M. Jaeger

Abstract: We present a scheme for generating shape-dependent, specific bonds between millimeter scale particles, using acoustic levitation. We levitate particles in an ultrasonic standing wave, allowing for substrate-free assembly. Secondary scattering generates shape-dependent attractive forces between particles, while driving the acoustic trap above its resonance frequency produces active fluctuations tha… ▽ More We present a scheme for generating shape-dependent, specific bonds between millimeter scale particles, using acoustic levitation. We levitate particles in an ultrasonic standing wave, allowing for substrate-free assembly. Secondary scattering generates shape-dependent attractive forces between particles, while driving the acoustic trap above its resonance frequency produces active fluctuations that mimic an effective temperature. We 3D print planar particles, and show that the local curvature of their binding sites controls the selectivity for attaching a matching particle. We find that the bound-state probability and bound-state lifetime can be independently tuned via the binding site depth and height respectively. Finally, we show that these principles can be used to design particles that assemble into complex structures. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Crystal Nucleation of Highly-Screened Charged Colloids

Authors: Marjolein de Jager, Laura Filion

Abstract: We study the nucleation of nearly-hard charged colloidal particles. We use Monte Carlo simulations in combination with free-energy calculations to accurately predict the phase diagrams of these particles and map them via the freezing density to hard spheres, then we use umbrella sampling to explore the nucleation process. Surprisingly, we find that even very small amounts of charge can have a sign… ▽ More We study the nucleation of nearly-hard charged colloidal particles. We use Monte Carlo simulations in combination with free-energy calculations to accurately predict the phase diagrams of these particles and map them via the freezing density to hard spheres, then we use umbrella sampling to explore the nucleation process. Surprisingly, we find that even very small amounts of charge can have a significant effect on the phase behavior. Specifically, we find that phase boundaries and nucleation barriers are mostly dependent on the Debye screening length, and that even screening lengths as small as 2% of the particle diameter are sufficient to show marked differences in both. This work demonstrates clearly that even mildly charged colloids are not effectively hard spheres. △ Less

Submitted 27 June, 2022; originally announced June 2022.

Designing Stress-Adaptive Dense Suspensions using Dynamic Covalent Chemistry

Authors: Grayson L. Jackson, Joseph M. Dennis, Neil D. Dolinski, Michael van der Naald, Ho** Kim, Christopher Eom, Stuart J. Rowan, Heinrich M. Jaeger

Abstract: The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle-particle contacts that dynamically adapts to imposed shear. Reported herein are studies aimed at explor-ing how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks l… ▽ More The non-Newtonian behaviors of dense suspensions are central to their use in technological and industrial applications and arise from a network of particle-particle contacts that dynamically adapts to imposed shear. Reported herein are studies aimed at explor-ing how dynamic covalent chemistry between particles and the polymeric solvent can be used to tailor such stress-adaptive contact networks leading to their unusual rheological behaviors. Specifically, a room temperature dynamic thia-Michael bond is employed to rationally tune the equilibrium constant (Keq) of the polymeric solvent to the particle interface. It is demonstrated that low Keq leads to shear thinning while high Keq produces antithixotropy, a rare phenomenon where the viscosity increases with shearing time. It is proposed that an increase in Keq increases the polymer graft density at the particle surface and that antithixotropy primar-ily arises from partial debonding of the polymeric graft/solvent from the particle surface and the formation of polymer bridges between particles. Thus, the implementation of dynamic covalent chemistry provides a new molecular handle with which to tailor the macroscopic rheology of suspensions by introducing programable time dependence. These studies open the door to energy absorbing materials that not only sense mechanical inputs and adjust their dissipation as a function of time or shear rate but can switch between these two modalities on demand. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Comments: 9 pages, 5 figures (Supporting: 26 pages, 17 figures)

Journal ref: Macromolecules 2022

General weak segregation theory with an application to monodisperse semi-flexible diblock copolymers

Authors: P. M. Jager, W. J. Briels, J. J. M. Slot

Abstract: A general theory has been developed for a polydisperse semi-flexible multi-block copolymer melt. Using the Bawendi-Freed approach to model semi-flexible chains an expression for the Landau free energy is derived in the weak segregation regime which includes the density and orientation order-parameters. The orientation order-parameter is described in the smectic phase and in more complicated struct… ▽ More A general theory has been developed for a polydisperse semi-flexible multi-block copolymer melt. Using the Bawendi-Freed approach to model semi-flexible chains an expression for the Landau free energy is derived in the weak segregation regime which includes the density and orientation order-parameters. The orientation order-parameter is described in the smectic phase and in more complicated structures such as the hexagonal phase. The Landau free energy contains contributions of two kinds of interactions. The first kind is the Flory- Huggins interaction which describes the incompatibility of chemically different blocks and may induce microphase separation. The second kind is the Maier- Saupe interaction which may induce nematic ordening. In the framework of the weak segragation limit the Landau theory allows to predict phase structures in the melt as a function of the composition, persistence length and the strength of the Flory-Huggins and Maier-Saupe interaction. The general theory is applied to a simple system of monodisperse semi-flexible diblock copolymers. In several phase diagrams a number of possible phase structures is predicted such as the bcc, hexagonal, smectic-A, smectic-C and nematic phase. The infuence of the Maier-Saupe interaction on the microphase structure is thoroughly discussed. △ Less

Submitted 21 February, 2022; originally announced February 2022.

Comments: 63 pages, 6 figures, to be published in The Journal of Chemical Physics

Stress-activated Constraints in Dense Suspension Rheology

Authors: Abhinendra Singh, Grayson L. Jackson, Michael van der Naald, Juan J. de Pablo, Heinrich M. Jaeger

Abstract: Dispersing small particles in a liquid can produce surprising behaviors when the solids fraction becomes large: rapid shearing drives these systems out of equilibrium and can lead to dramatic increases in viscosity (shear-thickening) or even solidification (shear jamming). These phenomena occur above a characteristic onset stress when particles are forced into frictional contact. Here we show via… ▽ More Dispersing small particles in a liquid can produce surprising behaviors when the solids fraction becomes large: rapid shearing drives these systems out of equilibrium and can lead to dramatic increases in viscosity (shear-thickening) or even solidification (shear jamming). These phenomena occur above a characteristic onset stress when particles are forced into frictional contact. Here we show via simulations how this can be understood within a framework that abstracts details of the forces acting at particle-particle contacts into general stress-activated constraints on relative particle movement. We find that focusing on just two constraints, affecting sliding and rolling at contact, can reproduce the experimentally observed shear thickening behavior quantitatively, despite widely different particle properties, surface chemistries, and suspending fluids. Within this framework parameters such as coefficients of sliding and rolling friction can each be viewed as a proxy for one or more forces of different physical or chemical origin, while the parameter magnitudes indicate the relative importance of the associated constraint. In this way, a new link is established that connects features observable in macroscale rheological measurements to classes of constraints arising from micro- or nano-scale properties. △ Less

Submitted 22 August, 2021; originally announced August 2021.

Comments: 7 Pages, 4 Figures

Mechanical properties of acoustically levitated granular rafts

Authors: Melody X. Lim, Bryan VanSaders, Anton Souslov, Heinrich M. Jaeger

Abstract: We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochasti… ▽ More We investigate a model system for the rotational dynamics of inertial many-particle clustering, in which sub-millimeter objects are acoustically levitated in air. Driven by scattered sound, levitated grains self-assemble into a monolayer of particles, forming mesoscopic granular rafts with both an acoustic binding energy and a bending rigidity. Detuning the acoustic trap can give rise to stochastic forces and torques that impart angular momentum to levitated objects. As the angular momentum of a quasi-two-dimensional granular raft is increased, the raft deforms from a disk to an ellipse, eventually pinching off into multiple separate rafts, in a mechanism that resembles the break-up of a liquid drop. We extract the raft effective surface tension and elastic modulus, and show that non-pairwise acoustic forces give rise to effective elastic moduli that scale with the raft size. We also show that the raft size controls the microstructural basis of plastic deformation, resulting in a transition from fracture to ductile failure. △ Less

Submitted 10 March, 2022; v1 submitted 17 June, 2021; originally announced June 2021.

Swirling and snaking, 3D oscillatory bifurcations of vesicle dynamics in microcirculation

Authors: **ming Lyu, Paul G. Chen, Alexander Farutin, Marc Jaeger, Chaouqi Misbah, and Marc Leonetti

Abstract: Vesicles are soft elastic bodies with distinctive mechanical properties such as bending resistance, membrane fluidity, and their strong ability to deform, mimicking some properties of biological cells. While previous three-dimensional (3D) studies have identified stationary shapes such as slipper and axisymmetric ones, we report a complete phase diagram of 3D vesicle dynamics in a bounded Poiseuil… ▽ More Vesicles are soft elastic bodies with distinctive mechanical properties such as bending resistance, membrane fluidity, and their strong ability to deform, mimicking some properties of biological cells. While previous three-dimensional (3D) studies have identified stationary shapes such as slipper and axisymmetric ones, we report a complete phase diagram of 3D vesicle dynamics in a bounded Poiseuille flow with two more oscillatory dynamics, 3D snaking and swirling. 3D snaking is characterized by planar oscillatory motion of the mass center and shape deformations, which is unstable and leads to swirling or slipper. Swirling emerges from supercritical pitchfork bifurcation. The mass center moves along a helix, the preserved shape rolls on itself and spins around the flow direction. Swirling can coexist with slipper. △ Less

Submitted 16 June, 2021; originally announced June 2021.

Comments: 6 pages, 6 figures

Defects in Crystals of Soft Colloidal Particles

Authors: Marjolein de Jager, Joris de Jong, Laura Filion

Abstract: In this paper we use computer simulations to examine point defects in systems of "soft" colloidal particles including Hertzian spheres, and star polymers. We use Monte Carlo simulations to determine the deformation of the different crystals associated with vacancies and interstitials and use thermodynamic integration to predict the equilibrium concentrations of such defects. We find that the natur… ▽ More In this paper we use computer simulations to examine point defects in systems of "soft" colloidal particles including Hertzian spheres, and star polymers. We use Monte Carlo simulations to determine the deformation of the different crystals associated with vacancies and interstitials and use thermodynamic integration to predict the equilibrium concentrations of such defects. We find that the nature of the lattice distortion is mainly determined by the crystal structure and not by the specifics of the interaction potential. We can distinguish one-, two-, and three-dimensional lattice distortions and find that the range of the distortion generally depends on the dimensionality. We find that in both model systems the deformation of the body-centered cubic (BCC) crystal caused by an interstitial is one-dimensional and we show that its structure is well described as a crowdion. Similarly, we show that the one-dimensional deformation of the hexagonal (H) crystal of Hertzian spheres caused by a vacancy can be characterized as a voidion. Interestingly, with the exception of the FCC crystal in the Hertzian sphere model, in all cases we find that the interstitial concentration is higher than the vacancy concentration. Most noteworthy, the concentration of interstitials in the BCC crystals can reach up to 1%. △ Less

Submitted 14 April, 2021; originally announced April 2021.

Point Defects in Crystals of Charged Colloids

Authors: Rinske M. Alkemade, Marjolein de Jager, Berend van der Meer, Frank Smallenburg, Laura Filion

Abstract: Charged colloidal particles - both on the nano and micron scales - have been instrumental in enhancing our understanding of both atomic and colloidal crystals. These systems can be straightforwardly realized in the lab, and tuned to self-assemble into body-centered cubic (BCC) and face-centered cubic (FCC) crystals. While these crystals will always exhibit a finite number of point defects, includi… ▽ More Charged colloidal particles - both on the nano and micron scales - have been instrumental in enhancing our understanding of both atomic and colloidal crystals. These systems can be straightforwardly realized in the lab, and tuned to self-assemble into body-centered cubic (BCC) and face-centered cubic (FCC) crystals. While these crystals will always exhibit a finite number of point defects, including vacancies and interstitials - which can dramatically impact their material properties - their existence is usually ignored in scientific studies. Here, we use computer simulations and free-energy calculations to characterize vacancies and interstitials in both FCC and BCC crystals of point-Yukawa particles. We show that, in the BCC phase, defects are surprisingly more common than in the FCC phase, and the interstitials manifest as so-called crowdions: an exotic one-dimensional defect proposed to exist in atomic BCC crystals. Our results open the door to directly observing these elusive defects in the lab. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Comments: 8 pages, 4 figures

Effect of pulse width on the dynamics of a deflated vesicle in unipolar and bipolar pulsed electric fields

Authors: Sudip Das, Marc Jaeger, Marc Leonetti, Rochish M. Thaokar, Paul G. Chen

Abstract: Giant unilamellar vesicles subjected to pulsed direct-current (pulsed-DC) fields are promising biomimetic systems to investigate the electroporation of cells. In strong electric fields, vesicles undergo significant deformation, which strongly alters the transmembrane potential, consequently the electroporation. Previous theoretical studies investigated the electrodeformation of vesicles in DC fiel… ▽ More Giant unilamellar vesicles subjected to pulsed direct-current (pulsed-DC) fields are promising biomimetic systems to investigate the electroporation of cells. In strong electric fields, vesicles undergo significant deformation, which strongly alters the transmembrane potential, consequently the electroporation. Previous theoretical studies investigated the electrodeformation of vesicles in DC fields (which are not pulsed). In this work, we computationally investigate the deformation of a deflated vesicle under unipolar, bipolar, and two-step unipolar pulses and show sensitive dependence of intermediate shapes on type of pulse and the pulse width. Starting with the stress-free initial shape of a deflated vesicle, which is similar to a prolate spheroid, the analysis is presented for the cases with higher and lower conductivities of the inner fluid medium relative to the outer fluid medium. For the ratio of inner to outer fluid conductivity, $σ_\mathrm{r}$ = 10, the shape always remains prolate, including when the field is turned off. For $σ_\mathrm{r} = 0.1$, several complex dynamics are observed, such as the prolate-to-oblate (PO), prolate-to-oblate-to-prolate (POP) shape transitions in time depending upon the strength of the field and the pulse properties. In this case, on turning off the field, a metastable oblate equilibrium shape is seen, that seems to be a characteristics of a deflated vesicle leading to POPO transitions. When a two-step unipolar pulse (a combination of a strong and a weak subpulse) is applied, a vesicle can reach an oblate or a prolate final shape depending upon the relative durations of the two subpulses. △ Less

Submitted 30 July, 2021; v1 submitted 3 December, 2020; originally announced December 2020.

Journal ref: Physics of Fluids 33, 081905 (2021)

Effect of two parallel intruders on net work during granular penetrations

Authors: Swapnil Pravin, Brian Chang, Endao Han, Lionel London, Daniel I. Goldman, Heinrich M. Jaeger, S. Tonia Hsieh

Abstract: The impact of single passive intruders into granular particles has been studied in detail. However, the impact force produced by multiple intruders separated at a distance from one another, and hence the effect of their presence in close proximity to one another, is largely unexplored. Here, we use numerical simulations and laboratory experiments to study the force response of two parallel rods in… ▽ More The impact of single passive intruders into granular particles has been studied in detail. However, the impact force produced by multiple intruders separated at a distance from one another, and hence the effect of their presence in close proximity to one another, is largely unexplored. Here, we use numerical simulations and laboratory experiments to study the force response of two parallel rods intruding vertically into granular media while varying the gap spacing between them. We also explored the effect of variations in friction, intruder size, and particle size on the force response. The net work ($W$) of the two rods over the depth of intrusion was measured, and the instantaneous velocities of particles over the duration of intrusion were calculated by simulations. We found that the work done by the intruders changes with distance between them. We observed a peak in $W$ at a gap spacing of $\sim$3 particle diameters, which was up to 25% greater than $W$ at large separation (\textgreater 11 particle diameters), beyond which the net work plateaued. This peak was likely due to less particle flow between intruders as we found a larger number of strong forces---identified as force chains---in the particle domain at gaps surrounding the peak force. Although higher friction caused greater force generation during intrusion, the gap spacing between the intruders at which the peak work was generated remained unchanged. Larger intruder sizes resulted in greater net work with the peak in $W$ occurring at slightly larger intruder separations. Taken together, our results show that peak work done by two parallel intruders remained within a narrow range, remaining robust to most other tested parameters. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Comments: 12 pages, 8 figures, 6 supplemental figures, and appendix

Journal ref: Phys. Rev. E 104, 024902 (2021)

Second sound in the BEC-BCS crossover

Authors: Daniel Kai Hoffmann, Vijay Pal Singh, Thomas Paintner, Manuel Jäger, Wolfgang Limmer, Ludwig Mathey, Johannes Hecker Denschlag

Abstract: Second sound is an entropy wave which propagates in the superfluid component of a quantum liquid. Because it is an entropy wave, it probes the thermodynamic properties of the quantum liquid which are determined, e.g., by the interaction strength between the particles of the quantum liquid and their temperature. Here, we study second sound propagation for a large range of interaction strengths with… ▽ More Second sound is an entropy wave which propagates in the superfluid component of a quantum liquid. Because it is an entropy wave, it probes the thermodynamic properties of the quantum liquid which are determined, e.g., by the interaction strength between the particles of the quantum liquid and their temperature. Here, we study second sound propagation for a large range of interaction strengths within the crossover between a Bose-Einstein condensate (BEC) and the Bardeen-Cooper-Schrieffer (BCS) superfluid. In particular, we investigate the strongly-interacting regime where currently theoretical predictions only exist in terms of an interpolation between the BEC, BCS and unitary regimes. Working with a quantum gas of ultracold fermionic $^6$Li atoms with tunable interactions, we show that the second sound speed varies only slightly in the crossover regime. We gain deeper insights into sound propagation and excitation of second sound by varying the excitation procedure which ranges from a sudden force pulse to a gentle heating pulse at the cloud center. These measurements are accompanied by classical-field simulations which help with the interpretation of the experimental data. Furthermore, we determine the spatial extension of the superfluid phase and estimate the superfluid density. In the future, this may be used to construct the so far unknown equation of state throughout the crossover. △ Less

Submitted 15 March, 2020; originally announced March 2020.

Comments: 25 pages, 7 figures

Shear thickening and jamming of dense suspensions: the "roll" of friction

Authors: Abhinendra Singh, Christopher Ness, Ryohei Seto, Juan J de Pablo, Heinrich M Jaeger

Abstract: Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction decreases the volume fraction required for DST and SJ, in quantitative agreement with real-life suspensions with adhesive surface chemistries and "rough" particle shape… ▽ More Particle-based simulations of discontinuous shear thickening (DST) and shear jamming (SJ) suspensions are used to study the role of stress-activated constraints, with an emphasis on resistance to gear-like rolling. Rolling friction decreases the volume fraction required for DST and SJ, in quantitative agreement with real-life suspensions with adhesive surface chemistries and "rough" particle shapes. It sets a distinct structure of the frictional force network compared to only sliding friction, and from a dynamical perspective leads to an increase in the velocity correlation length, in part responsible for the increased viscosity. The physics of rolling friction is thus a key element in achieving a comprehensive understanding of strongly shear-thickening materials. △ Less

Submitted 7 May, 2020; v1 submitted 25 February, 2020; originally announced February 2020.

Comments: 5 pages, 4 figures. +Supplemental Material--- --- Supplementary Material also consists of the following movies: ---https://youtu.be/wgrfN7jiu1g (Force network in 3D at volume fraction 0.45, at high stress limit, with and without rolling friction) --- https://youtu.be/SMzTB7CsRsY (Force network in 2D at packing fraction 0.7, at high stress limit, with and without rolling friction)

Journal ref: Phys. Rev. Lett. 124, 248005 (2020)

Shape induced segregation and anomalous particle transport under spherical confinement

Authors: Abhinendra Singh, Jiyuan Li, Xikai Jiang, Juan P. Hernández-Ortiz, Heinrich M. Jaeger, Juan J. de Pablo

Abstract: Colloid or nanoparticle mobility under confinement is of central importance to a wide range of physical and biological processes. Here, we introduce a minimal model of particles in a hydrodynamic continuum to examine how particle shape and concentration affect the transport of particles in spherical confinement. Specifically, an immersed boundary-General geometry Ewald-like approach is adopted to… ▽ More Colloid or nanoparticle mobility under confinement is of central importance to a wide range of physical and biological processes. Here, we introduce a minimal model of particles in a hydrodynamic continuum to examine how particle shape and concentration affect the transport of particles in spherical confinement. Specifically, an immersed boundary-General geometry Ewald-like approach is adopted to simulate the dynamics of spheres and cylinders under the influence of short-and long-range fluctuating hydrodynamic interactions with appropriate non-slip conditions at the confining walls. An efficient $\it{O(N)}$ parallel finite element algorithm is used, thereby allowing simulations at high concentrations, while a Chebyshev polynomial approximation is implemented in order to satisfy the fluctuation-dissipation theorem. A concentration-dependent anomalous diffusion is observed for suspended particles. It is found that introducing cylinders in a background of spheres, i.e. particles with a simple degree of anisotropy, has a pronounced influence on the structure and dynamics of the particles. First, increasing the fraction of cylinders induces a particle segregation effect, where spheres are pushed towards the wall and cylinders remain near the center of the cavity. This segregation leads to lower mobility for the spheres relative to that encountered in a system of pure spheres at the same volume fraction. Second, the diffusive-to-anomalous transition and the degree of anomaly--quantified by the power-law exponent in the mean square displacement vs. time relation-both increase as the fraction of cylinders becomes larger. These findings are of relevance for studies of diffusion in the cytoplasm, where proteins exhibit a distribution of size and shapes that could lead to some of the effects identified in the simulations reported here. △ Less

Submitted 5 February, 2020; originally announced February 2020.

Comments: 9 pages, 5 figures

Journal ref: Physics of Fluids 32, 053307 (2020)

Shape transition and hydrodynamics of vesicles in tube flow

Authors: Paul G. Chen, J. M. Lyu, M. Jaeger, M. Leonetti

Abstract: The steady motion and deformation of a lipid-bilayer vesicle translating through a circular tube in low Reynolds number pressure-driven flow are investigated numerically using an axisymmetric boundary element method. This fluid-structure interaction problem is determined by three dimensionless parameters: reduced volume (a measure of the vesicle asphericity), geometric confinement (the ratio of th… ▽ More The steady motion and deformation of a lipid-bilayer vesicle translating through a circular tube in low Reynolds number pressure-driven flow are investigated numerically using an axisymmetric boundary element method. This fluid-structure interaction problem is determined by three dimensionless parameters: reduced volume (a measure of the vesicle asphericity), geometric confinement (the ratio of the vesicle effective radius to the tube radius), and capillary number (the ratio of viscous to bending forces). The physical constraints of a vesicle -- fixed surface area and enclosed volume when it is confined in a tube -- determine critical confinement beyond which it cannot pass through without rupturing its membrane. The simulated results are presented in a wide range of reduced volumes [0.6, 0.98] for different degrees of confinement; the reduced volume of 0.6 mimics red blood cells. We draw a phase diagram of vesicle shapes and propose a shape transition line separating the parachute-like shape region from the bullet-like one in the reduced volume versus confinement phase space. We show that the shape transition marks a change in the behavior of vesicle mobility, especially for highly deflated vesicles. Most importantly, high-resolution simulations make it possible for us to examine the hydrodynamic interaction between the wall boundary and the vesicle surface at conditions of very high confinement, thus providing the limiting behavior of several quantities of interest, such as the thickness of lubrication film, vesicle mobility and its length, and the extra pressure drop due to the presence of the vesicle. This extra pressure drop holds implications for the rheology of dilute vesicle suspensions. Furthermore, we present various correlations and discuss a number of practical applications. △ Less

Submitted 12 March, 2020; v1 submitted 14 December, 2019; originally announced December 2019.

Comments: 31 pages, 14 figures

Journal ref: Phys. Rev. Fluids 5:043602, 2020

Pair correlations in the normal phase of an attractive Fermi gas

Authors: M. Pini, P. Pieri, M. Jäger, J. Hecker Denschlag, G. Calvanese Strinati

Abstract: In a recent paper [Phys. Rev. A 99, 053617 (2019)], the total number of fermion pairs in a spin-balanced two-component Fermi gas of $^6$Li atoms was experimentally probed in the normal phase above the superfluid critical temperature, in order to investigate the sectors of pseudogap and preformed-pair in the temperature-coupling phase diagram. Here, we present a theoretical account of these experim… ▽ More In a recent paper [Phys. Rev. A 99, 053617 (2019)], the total number of fermion pairs in a spin-balanced two-component Fermi gas of $^6$Li atoms was experimentally probed in the normal phase above the superfluid critical temperature, in order to investigate the sectors of pseudogap and preformed-pair in the temperature-coupling phase diagram. Here, we present a theoretical account of these experimental results in terms of an ab-initio self-consistent $t$-matrix calculation, which emphasizes the role of the pair-correlation function between opposite-spin fermions at equilibrium. Good agreement is found between the available experimental data and the theoretical results obtained with no adjustable parameter. △ Less

Submitted 10 December, 2019; originally announced December 2019.

Comments: 16 pages, 11 figures

Journal ref: New Jour. Phys. 22, 083008 (2020)

Dynamic and programmable cellular-scale granules enable tissue-like materials

Authors: Yin Fang, Endao Han, Xin-Xing Zhang, Yuanwen Jiang, Yiliang Lin, Jiuyun Shi, Jiangbo Wu, Lingyuan Meng, Xiang Gao, Philip J. Griffin, Xianghui Xiao, Hsiu-Ming Tsai, Hua Zhou, Xiaobing Zuo, Qing Zhang, Miaoqi Chu, Qingteng Zhang, Ya Gao, Leah K. Roth, Reiner Bleher, Zhiyuan Ma, Zhang Jiang, Ji** Yue, Chien-Min Kao, Chin-Tu Chen , et al. (4 additional authors not shown)

Abstract: Tissue-like materials are required in many robotic systems to improve human-machine interactions. However, the mechanical properties of living tissues are difficult to replicate. Synthetic materials are not usually capable of simultaneously displaying the behaviors of the cellular ensemble and the extracellular matrix. A particular challenge is identification of a cell-like synthetic component whi… ▽ More Tissue-like materials are required in many robotic systems to improve human-machine interactions. However, the mechanical properties of living tissues are difficult to replicate. Synthetic materials are not usually capable of simultaneously displaying the behaviors of the cellular ensemble and the extracellular matrix. A particular challenge is identification of a cell-like synthetic component which is tightly integrated with its matrix and also responsive to external stimuli at the population level. Here, we demonstrate that cellular-scale hydrated starch granules, an underexplored component in materials science, can turn conventional hydrogels into tissue-like materials when composites are formed. Using several synchrotron-based X-ray techniques, we reveal the mechanically-induced motion and training dynamics of the starch granules in the hydrogel matrix. These dynamic behaviors enable multiple tissue-like properties such as strain-stiffening, anisotropy, mechanical heterogeneity, programmability, mechanochemistry, impact absorption, and self-healability. The starch-hydrogel composites can be processed as robotic skins that maintain these tissue-like characteristics. △ Less

Submitted 9 November, 2019; originally announced November 2019.

Comments: 73 pages, main text and supplemental information

Memory in nonmonotonic stress relaxation of a granular system

Authors: Kieran A. Murphy, Jonathon W. Kruppe, Heinrich M. Jaeger

Abstract: We demonstrate experimentally that a granular packing of glass spheres is capable of storing memory of multiple strain states in the dynamic process of stress relaxation. Modeling the system as a non-interacting population of relaxing elements, we find that the functional form of the predicted relaxation requires a quantitative correction which grows in severity with each additional memory and is… ▽ More We demonstrate experimentally that a granular packing of glass spheres is capable of storing memory of multiple strain states in the dynamic process of stress relaxation. Modeling the system as a non-interacting population of relaxing elements, we find that the functional form of the predicted relaxation requires a quantitative correction which grows in severity with each additional memory and is suggestive of interactions between elements. Our findings have implications for the broad class of soft matter systems that display memory and anomalous relaxation. △ Less

Submitted 16 November, 2019; v1 submitted 4 November, 2019; originally announced November 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 124, 168002 (2020)

Stress fluctuations and shear thickening in dense granular suspensions

Authors: Qin Xu, Abhinendra Singh, Heinrich M. Jaeger

Abstract: We experimentally investigate the rheology and stress fluctuations of granules densely suspended in silicone oil. We find that both thickening strength and stress fluctuations significantly weaken with oil viscosity $η_0$. Comparison of our rheological results to the Wyart-Cates model for describing different dynamic jamming states suggests a transition from frictional contacts to lubrication inte… ▽ More We experimentally investigate the rheology and stress fluctuations of granules densely suspended in silicone oil. We find that both thickening strength and stress fluctuations significantly weaken with oil viscosity $η_0$. Comparison of our rheological results to the Wyart-Cates model for describing different dynamic jamming states suggests a transition from frictional contacts to lubrication interactions as $η_0$ increases. To clarify the contribution from viscous interactions to the rheology, we systematically measure stress fluctuations in various flow states. Reduction of stress fluctuations with $η_0$ indicates that a strong lubrication layer greatly inhibits force correlations among particles. Measuring stress fluctuations in the strong shear thickening regime, we observe a crossover from asymmetric Gamma to symmetric Gaussian distributions and associated with it a decrease of lateral (radial) correlation length $ξ$ with increasing shear rate. △ Less

Submitted 22 October, 2019; originally announced October 2019.

Comments: 18 pages, 5 figures

Intrusion into granular media beyond the quasi-static regime

Authors: Leah K. Roth, Endao Han, Heinrich M. Jaeger

Abstract: The drag force exerted on an object intruding into granular media can depend on the object's velocity as well as the depth penetrated. We report on intrusion experiments at constant speed over four orders in magnitude together with systematic molecular dynamics simulations well beyond the quasi-static regime. We find that velocity dependence crosses over to depth dependence at a characteristic tim… ▽ More The drag force exerted on an object intruding into granular media can depend on the object's velocity as well as the depth penetrated. We report on intrusion experiments at constant speed over four orders in magnitude together with systematic molecular dynamics simulations well beyond the quasi-static regime. We find that velocity dependence crosses over to depth dependence at a characteristic time after initial impact. This crossover time scale, which depends on penetration speed, depth, gravity and intruder geometry, challenges current models that assume additive contributions to the drag. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Comments: 5 pages, 5 figures

Journal ref: Phys. Rev. Lett. 126, 218001 (2021)

Precision measurement of tribocharging in acoustically levitated sub-millimeter grains

Authors: Adam G. Kline, Melody Xuan Lim, Heinrich M. Jaeger

Abstract: Contact electrification of dielectric grains forms the basis for a myriad of physical phenomena. However, even the basic aspects of collisional charging between grains are still unclear. Here we develop a new experimental method, based on acoustic levitation, which allows us to controllably and repeatedly collide two sub-millimeter grains and measure the evolution of their electric charges. This i… ▽ More Contact electrification of dielectric grains forms the basis for a myriad of physical phenomena. However, even the basic aspects of collisional charging between grains are still unclear. Here we develop a new experimental method, based on acoustic levitation, which allows us to controllably and repeatedly collide two sub-millimeter grains and measure the evolution of their electric charges. This is therefore the first tribocharging experiment to provide complete electric isolation for the grain-grain system from its surroundings. We use this method to measure collisional charging rates between pairs of grains for three different material combinations: polyethylene-polyethylene, polystyrene-polystyrene, and polystyrene-sulfonated polystyrene. The ability to directly and noninvasively collide particles of different constituent materials, chemical functionality, size, and shape opens the door to detailed studies of collisional charging in granular materials. △ Less

Submitted 21 October, 2019; originally announced October 2019.

Temperature Dependence of Nylon and PTFE Triboelectrification

Authors: Isaac A. Harris, Melody X. Lim, Heinrich M. Jaeger

Abstract: Contact electrification, or tribocharging, is pertinent to a broad range of industrial and natural processes involving dielectric materials. However, the basic mechanism by which charge is transferred between insulators is still unclear. Here, we use a simple apparatus that brings two macroscopic surfaces into repeated contact and measures the charge on the surfaces after each contact. We vary the… ▽ More Contact electrification, or tribocharging, is pertinent to a broad range of industrial and natural processes involving dielectric materials. However, the basic mechanism by which charge is transferred between insulators is still unclear. Here, we use a simple apparatus that brings two macroscopic surfaces into repeated contact and measures the charge on the surfaces after each contact. We vary the temperature of the surfaces, and find that increasing temperature leads to a decrease in the magnitude of charge transfer. When paired with a Monte-Carlo simulation and TGA measurements, our results support a mechanism where adsorbed surface water is crucial for charge exchange. Our setup is easily extendable to a variety of industrially relevant materials. △ Less

Submitted 29 May, 2019; originally announced May 2019.

Comments: 10 pages, 12 figures. Submitted to Physical Review Materials

Journal ref: Phys. Rev. Materials 3, 085603 (2019)

DScribe: Library of Descriptors for Machine Learning in Materials Science

Authors: Lauri Himanen, Marc O. J. Jäger, Eiaki V. Morooka, Filippo Federici Canova, Yashasvi S. Ranawat, David Z. Gao, Patrick Rinke, Adam S. Foster

Abstract: DScribe is a software package for machine learning that provides popular feature transformations ("descriptors") for atomistic materials simulations. DScribe accelerates the application of machine learning for atomistic property prediction by providing user-friendly, off-the-shelf descriptor implementations. The package currently contains implementations for Coulomb matrix, Ewald sum matrix, sine… ▽ More DScribe is a software package for machine learning that provides popular feature transformations ("descriptors") for atomistic materials simulations. DScribe accelerates the application of machine learning for atomistic property prediction by providing user-friendly, off-the-shelf descriptor implementations. The package currently contains implementations for Coulomb matrix, Ewald sum matrix, sine matrix, Many-body Tensor Representation (MBTR), Atom-centered Symmetry Function (ACSF) and Smooth Overlap of Atomic Positions (SOAP). Usage of the package is illustrated for two different applications: formation energy prediction for solids and ionic charge prediction for atoms in organic molecules. The package is freely available under the open-source Apache License 2.0. △ Less

Submitted 18 April, 2019; originally announced April 2019.

Journal ref: Comp. Phys. Comm. 247 (2020) 106949

The intertwined roles of particle shape and surface roughness in controlling the shear strength of a granular material

Authors: Kieran A. Murphy, Arthur K. MacKeith, Leah K. Roth, Heinrich M. Jaeger

Abstract: Both the shape of individual particles and their surface properties contribute to the strength of a granular material under shear. Here we show the degree to which these two aspects can be intertwined. In experiments on assemblies of 3D printed, convex lens-shaped particles, we measure the stress-strain response under repeated compressive loading and find that the aggregate's shear strength falls… ▽ More Both the shape of individual particles and their surface properties contribute to the strength of a granular material under shear. Here we show the degree to which these two aspects can be intertwined. In experiments on assemblies of 3D printed, convex lens-shaped particles, we measure the stress-strain response under repeated compressive loading and find that the aggregate's shear strength falls rapidly when compared to other particle shapes. We probe the granular material at mm-scales with X-ray computed tomography and $μ$m-scales with high-resolution surface metrology to look for the cause of the degradation. We find that wear due to accumulated deformation smooths out the lens surfaces in a controlled and systematic manner that correlates with a significant loss of shear strength observed for the assembly as a whole. The sensitivity of lenses to changes in surface properties contrasts with results for assemblies of 3D printed tetrahedra and spheres, which under the same load cycling are found to exhibit only minor degradation in strength. This case study provides insight into the relationship between particle shape, surface wear, and the overall material response, and suggests new strategies when designing a granular material with desired evolution of properties under repeated deformation. △ Less

Submitted 24 June, 2019; v1 submitted 8 February, 2019; originally announced February 2019.

Comments: 6 pages, 5 figures

Edges control clustering in levitated granular matter

Authors: Melody Xuan Lim, Kieran A. Murphy, Heinrich M. Jaeger

Abstract: The properties of small clusters depend dramatically on the interactions between their constituent particles. However, it remains challenging to design and tune the interactions between macroscopic particles, such as in a granular material. Here, we use acoustic levitation to trap macroscopic grains and induce forces between them. Our main results show that particles levitated in an acoustic field… ▽ More The properties of small clusters depend dramatically on the interactions between their constituent particles. However, it remains challenging to design and tune the interactions between macroscopic particles, such as in a granular material. Here, we use acoustic levitation to trap macroscopic grains and induce forces between them. Our main results show that particles levitated in an acoustic field prefer to make contact along sharp edges. The radius of curvature of the edges directly controls the magnitude of these forces. These highly directional interactions, combined with local contact forces, give rise to a diverse array of cluster shapes. Our results open up new possibilities for the design of specific forces between macroscopic particles, directing their assembly, and actuating their motion. △ Less

Submitted 6 June, 2019; v1 submitted 24 January, 2019; originally announced January 2019.

Comments: Submitted to the special edition of Granular Matter, In Memoriam of Robert P. Behringer. For supplementary movies, see https://youtu.be/u_IJsMC69-8 and https://youtu.be/rxNYclVQFUY

Tuning Interparticle Hydrogen Bonding in Shear-Jamming Suspensions: Kinetic Effects and Consequences for Tribology and Rheology

Authors: Nicole M. James, Chiao-Peng Hsu, Nicholas D. Spencer, Heinrich M. Jaeger, Lucio Isa

Abstract: The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so fa… ▽ More The shear-jamming of dense suspensions can be strongly affected by molecular-scale interactions between particles, e.g. by chemically controlling their propensity for hydrogen bonding. However, hydrogen bonding not only enhances interparticle friction, a critical parameter for shear jamming, but also introduces (reversible) adhesion, whose interplay with friction in shear-jamming systems has so far remained unclear. Here, we present atomic force microscopy studies to assess interparticle adhesion, its relationship to friction, and how these attributes are influenced by urea, a molecule that interferes with hydrogen bonding. We characterize the kinetics of this process with nuclear magnetic resonance, relating it to the time dependence of the macroscopic flow behavior with rheological measurements. We find that time-dependent urea sorption reduces friction and adhesion, causing a shift in the shear-jamming onset. These results extend our mechanistic understanding of chemical effects on the nature of shear jamming, promising new avenues for fundamental studies and applications alike. △ Less

Submitted 15 January, 2019; originally announced January 2019.

Controlling Shear Jamming in Dense Suspensions via the Particle Aspect Ratio

Authors: Nicole M. James, Huayue Xue, Medha Goyal, Heinrich M. Jaeger

Abstract: Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shap… ▽ More Dense suspension of particles in a liquid exhibit rich, non-Newtonian behaviors such as shear thickening and shear jamming. Shear thickening is known to be enhanced by increasing the particles' frictional interactions and also by making their shape more anisotropic. For shear jamming, however, only the role of interparticle friction has been investigated, while the effect of changing particle shape has so far not been studied systematically. To address this we here synthesize smooth silica particles and design the particle surface chemistry to generate strong frictional interactions such that dense, aqueous suspensions of spheres exhibit pronounced shear jamming. We then vary particle aspect ratio from $Γ$=1 (spheres) to $Γ$=11 (slender rods), and perform rheological measurements to determine the effect of particle anisotropy on the onset of shear jamming and its precursor, discontinuous shear thickening. Kee** the frictional interactions fixed, we find that increasing aspect ratio significantly reduces $φ_m$, the minimum particle packing fraction at which shear jamming can be observed, to values as low $φ_m=33\%$ for $Γ$=11. The ability to independently control particle interactions due to friction and shape anisotropy yields fundamental insights about the thickening and jamming capabilities of suspensions and provides a framework to rationally design shear jamming characteristics. △ Less

Submitted 13 January, 2019; originally announced January 2019.

Comments: 5 pages, 4 figures

Stress controlled rheology of dense suspensions using transient flows

Authors: Endao Han, Nicole M. James, Heinrich M. Jaeger

Abstract: Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method… ▽ More Dense suspensions of hard particles in a Newtonian liquid can be jammed by shear when the applied stress exceeds a certain threshold. However, this jamming transition from a fluid into a solidified state cannot be probed with conventional steady-state rheology because the stress distribution inside the material cannot be controlled with sufficient precision. Here we introduce and validate a method that overcomes this obstacle. Rapidly propagating shear fronts are generated and used to establish well-controlled local stress conditions that sweep across the material. Exploiting such transient flows, we are able to track how a dense suspension approaches its shear jammed state dynamically, and can quantitatively map out the onset stress for solidification in a state diagram. △ Less

Submitted 28 October, 2018; originally announced October 2018.

Comments: 12 pages, 12 figures

Journal ref: Phys. Rev. Lett. 123, 248002 (2019)

Dynamic jamming of dense suspensions under tilted impact

Authors: Endao Han, Liang Zhao, Nigel Van Ha, S. Tonia Hsieh, Daniel B. Szyld, Heinrich M. Jaeger

Abstract: Dense particulate suspensions can not only increase their viscosity and shear thicken under external forcing, but also jam into a solid-like state that is fully reversible when the force is removed. An impact on the surface of a dense suspension can trigger this jamming process by generating a shear front that propagates into the bulk of the system. Tracking and visualizing such a front is difficu… ▽ More Dense particulate suspensions can not only increase their viscosity and shear thicken under external forcing, but also jam into a solid-like state that is fully reversible when the force is removed. An impact on the surface of a dense suspension can trigger this jamming process by generating a shear front that propagates into the bulk of the system. Tracking and visualizing such a front is difficult because suspensions are optically opaque and the front can propagate as fast as several meters per second. Recently, high-speed ultrasound imaging has been used to overcome this problem and extract two-dimensional sections of the flow field associated with jamming front propagation. Here we extend this method to reconstruct the three-dimensional flow field. This enables us to investigate the evolution of jamming fronts for which axisymmetry cannot be assumed, such as impact at angles tilted away from the normal to the free surface of the suspension. We find that sufficiently far from solid boundaries the resulting flow field is approximately identical to that generated by normal impact, but rotated and aligned with the angle of impact. However, once the front approaches the solid boundary at the bottom of the container, it generates a squeeze flow that deforms the front profile and causes jamming to proceed in a non-axisymmetric manner. △ Less

Submitted 9 May, 2019; v1 submitted 25 October, 2018; originally announced October 2018.

Comments: 12 pages, 11 figures

Transforming mesoscale granular plasticity through particle shape

Authors: Kieran A. Murphy, Karin A. Dahmen, Heinrich M. Jaeger

Abstract: When an amorphous material is strained beyond the point of yielding it enters a state of continual reconfiguration via dissipative, avalanche-like slip events that relieve built-up local stress. However, how the statistics of such events depend on local interactions among the constituent units remains debated. To address this we perform experiments on granular material in which we use particle sha… ▽ More When an amorphous material is strained beyond the point of yielding it enters a state of continual reconfiguration via dissipative, avalanche-like slip events that relieve built-up local stress. However, how the statistics of such events depend on local interactions among the constituent units remains debated. To address this we perform experiments on granular material in which we use particle shape to vary the interactions systematically. Granular material, confined under constant pressure boundary conditions, is uniaxially compressed while stress is measured and internal rearrangements are imaged with x-rays. We introduce volatility, a quantity from economic theory, as a powerful new tool to quantify the magnitude of stress fluctuations, finding systematic, shape-dependent trends. For all 22 investigated shapes the magnitude $s$ of relaxation events is well-fit by a truncated power law distribution $P(s)\sim {s}^{-τ} exp(-s/s^*)$, as has been proposed within the context of plasticity models. The power law exponent $τ$ for all shapes tested clusters around $τ=$ 1.5, within experimental uncertainty covering the range 1.3 - 1.7. The shape independence of $τ$ and its compatibility with mean field models indicate that the granularity of the system, but not particle shape, modifies the stress redistribution after a slip event away from that of continuum elasticity. Meanwhile, the characteristic maximum event size $s^*$ changes by two orders of magnitude and tracks the shape dependence of volatility. Particle shape in granular materials is therefore a powerful new factor influencing the distance at which an amorphous system operates from scale-free criticality. These experimental results are not captured by current models and suggest a need to reexamine the mechanisms driving mesoscale plastic deformation in amorphous systems. △ Less

Submitted 21 December, 2018; v1 submitted 19 August, 2018; originally announced August 2018.

Comments: 11 pages, 8 figures. v3 adds a new appendix and figure about event rates and changes several parts the text

Journal ref: Phys. Rev. X 9, 011014 (2019)

Cluster formation via sonic depletion forces in levitated granular matter

Authors: Melody X. Lim, Anton Souslov, Vincenzo Vitelli, Heinrich M. Jaeger

Abstract: The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a… ▽ More The properties of small clusters can differ dramatically from the bulk phases of the same constituents. In equilibrium, cluster assembly has been recently explored, whereas out of equilibrium, the physical principles of clustering remain elusive. These principles underlie phenomena from molecular assembly to the formation of planets from granular matter. Here, we introduce acoustic levitation as a platform to experimentally probe the formation of nonequilibrium small structures in a controlled environment. We focus on the minimal models of cluster formation: six and seven millimetre-scale particles in two dimensions. Experiments and modelling reveal that, in contrast to thermal colloids, in non-equilibrium granular ensembles the magnitude of active fluctuations controls not only the assembly rates but also their assembly pathways and ground-state statistics. These results open up new possibilities for non-invasively manipulating macroscopic particles, tuning their interactions, and directing their assembly. △ Less

Submitted 11 August, 2018; originally announced August 2018.

Journal ref: Nature Physics (2019)

Conforming nanoparticle sheets to surfaces with Gaussian curvature

Authors: Noah P. Mitchell, Remington L. Carey, Jelani Hannah, Yifan Wang, Maria Cortes Ruiz, Sean P. McBride, Xiao-Min Lin, Heinrich M. Jaeger

Abstract: Nanoparticle monolayer sheets are ultrathin inorganic-organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending rigidity allows them to easily roll into or conform to cylindrical geometries. Nanoparticle monolayers not only can bend, but also cope with strain through loc… ▽ More Nanoparticle monolayer sheets are ultrathin inorganic-organic hybrid materials that combine highly controllable optical and electrical properties with mechanical flexibility and remarkable strength. Like other thin sheets, their low bending rigidity allows them to easily roll into or conform to cylindrical geometries. Nanoparticle monolayers not only can bend, but also cope with strain through local particle rearrangement and plastic deformation. This means that, unlike thin sheets such as paper or graphene, nanoparticle sheets can much more easily conform to surfaces with complex topography characterized by non-zero Gaussian curvature, like spherical caps or saddles. Here, we investigate the limits of nanoparticle monolayers' ability to conform to substrates with Gaussian curvature by stam** nanoparticle sheets onto lattices of larger polystyrene spheres. Tuning the local Gaussian curvature by increasing the size of the substrate spheres, we find that the stamped sheet morphology evolves through three characteristic stages: from full substrate coverage, where the sheet extends over the interstices in the lattice, to coverage in the form of caps that conform tightly to the top portion of each sphere and fracture at larger polar angles, to caps that exhibit radial folds. Through analysis of the nanoparticle positions, obtained from scanning electron micrographs, we extract the local strain tensor and track the onset of strain-induced dislocations in the particle arrangement. By considering the interplay of energies for elastic and plastic deformations and adhesion, we construct arguments that capture the observed changes in sheet morphology as Gaussian curvature is tuned over two orders of magnitude. △ Less

Submitted 2 February, 2020; v1 submitted 10 August, 2018; originally announced August 2018.

Comments: 13 pages for main text + 5 pages for supplementary information

Journal ref: Soft Matter, 14, 9107-9117 (2018)

Ratchet-induced variations in bulk states of an active ideal gas

Authors: Jeroen Rodenburg, Siddharth Paliwal, Marjolein de Jager, Peter G. Bolhuis, Marjolein Dijkstra, René van Roij

Abstract: We study the distribution of active, noninteracting particles over two bulk states separated by a ratchet potential. By solving the steady-state Smoluchowski equations in a flux-free setting, we show that the ratchet potential affects the distribution of particles over the bulks, and thus exerts an influence of infinitely long range. As we show, crucial for having such a long-range influence is an… ▽ More We study the distribution of active, noninteracting particles over two bulk states separated by a ratchet potential. By solving the steady-state Smoluchowski equations in a flux-free setting, we show that the ratchet potential affects the distribution of particles over the bulks, and thus exerts an influence of infinitely long range. As we show, crucial for having such a long-range influence is an external potential that is nonlinear. We characterize how the difference in bulk densities depends on activity and on the ratchet potential, and we identify power law dependencies on system parameters in several limiting cases. While weakly active systems are often understood in terms of an effective temperature, we present an analytical solution that explicitly shows that this is not possible in the current setting. Instead, we rationalize our results by a simple transition state model, that presumes particles to cross the potential barrier by Arrhenius rates modified for activity. While this model does not quantitatively describe the difference in bulk densities for feasible parameter values, it does reproduce - in its regime of applicability - the complete power law behavior correctly. △ Less

Submitted 12 November, 2018; v1 submitted 24 July, 2018; originally announced July 2018.

Comments: 11 pages, 6 figures

Journal ref: J. Chem. Phys. 149, 174910 (2018)

Evolutionary strategy for inverse charge measurements of dielectric particles

Authors: Xikai Jiang, Jiyuan Li, Victor Lee, Heinrich M. Jaeger, Olle G. Heinonen, Juan J. de Pablo

Abstract: We report a computational strategy to obtain the charges of individual dielectric particles from experimental observation of their interactions as a function of time. This strategy uses evolutionary optimization to minimize the difference between trajectories extracted from experiment and simulated trajectories based on many-particle force fields. The force fields include both Coulombic interactio… ▽ More We report a computational strategy to obtain the charges of individual dielectric particles from experimental observation of their interactions as a function of time. This strategy uses evolutionary optimization to minimize the difference between trajectories extracted from experiment and simulated trajectories based on many-particle force fields. The force fields include both Coulombic interactions and dielectric polarization effects that arise due to particle-particle charge mismatch and particle-environment dielectric contrast. The strategy was applied to systems of free falling charged granular particles in vacuum, where electrostatic interactions are the only driving forces that influence the particles' motion. We show that when the particles' initial positions and velocities are known, the optimizer requires only an initial and final particle configuration of a short trajectory in order to accurately infer the particles' charges; when the initial velocities are unknown and only the initial positions are given, the optimizer can learn from multiple frames along the trajectory to determine the particles' initial velocities and charges. While the results presented here offer a proof-of-concept demonstration of the proposed ideas, the proposed strategy could be extended to more complex systems of electrostatically charged granular matter. △ Less

Submitted 21 May, 2018; originally announced May 2018.

Pair fraction in a finite temperature Fermi gas on the BEC side of the BCS-BEC crossover

Authors: Thomas Paintner, Daniel K. Hoffmann, Manuel Jäger, Wolfgang Limmer, Wladimir Schoch, Benjamin Deissler, Michele Pini, Pierbiagio Pieri, Giancarlo Calvanese Strinati, Cheng Chin, Johannes Hecker Denschlag

Abstract: We investigate pairing in a strongly interacting two-component Fermi gas with positive scattering length. In this regime, pairing occurs at temperatures above the superfluid critical temperature; unbound fermions and pairs coexist in thermal equilibrium. Measuring the total number of these fermion pairs in the gas we systematically investigate the phases in the sectors of pseudogap and preformed-p… ▽ More We investigate pairing in a strongly interacting two-component Fermi gas with positive scattering length. In this regime, pairing occurs at temperatures above the superfluid critical temperature; unbound fermions and pairs coexist in thermal equilibrium. Measuring the total number of these fermion pairs in the gas we systematically investigate the phases in the sectors of pseudogap and preformed-pair. Our measurements quantitatively test predictions from two theoretical models. Interestingly, we find that already a model based on classical atom-molecule equilibrium describes our data quite well. △ Less

Submitted 30 April, 2019; v1 submitted 28 March, 2018; originally announced March 2018.

Comments: 6 pages, 5 figures

Journal ref: Phys. Rev. A 99, 053617 (2019)