-
Ultrahigh Thermal Conductivity of Cubic Boron Arsenide with an Unexpectedly Strong Temperature Dependence
Authors:
Songrui Hou,
Fengjiao Pan,
** Shi,
Zahra Ebrahim Nataj,
Fariborz Kargar,
Alexander A. Balandin,
David G. Cahill,
Chen Li,
Zhifeng Ren,
Richard B. Wilson
Abstract:
Materials with high thermal conductivity are needed to conduct heat away from hot spots in power electronics and optoelectronic devices. Cubic boron arsenide (c-BAs) has a high thermal conductivity due to its special phonon dispersion relation. Previous experimental studies of c-BAs report a room-temperature thermal conductivity between 1000 and 1300 watts per meter-kelvin. We synthesized high pur…
▽ More
Materials with high thermal conductivity are needed to conduct heat away from hot spots in power electronics and optoelectronic devices. Cubic boron arsenide (c-BAs) has a high thermal conductivity due to its special phonon dispersion relation. Previous experimental studies of c-BAs report a room-temperature thermal conductivity between 1000 and 1300 watts per meter-kelvin. We synthesized high purity c-BAs single crystals with room-temperature thermal conductivity of 1500 watts per meter-kelvin. We observed its thermal conductivity to be proportional to the inverse square of temperature between 300 and 600 kelvin, a stronger dependence than predicted by state-of-the-art theory.
△ Less
Submitted 31 January, 2024;
originally announced February 2024.
-
Ultra-broadband near-field Josephson microwave microscopy
Authors:
** Zhang,
Yang-Yang Lyu,
**g**g Lv,
Zihan Wei,
Shixian Chen,
Chenguang Wang,
Hongmei Du,
Dingding Li,
Zixi Wang,
Shoucheng Hou,
Runfeng Su,
Hancong Sun,
Yuan Du,
Li Du,
Liming Gao,
Yong-Lei Wang,
Huabing Wang,
Peiheng Wu
Abstract:
Advanced microwave technologies constitute the foundation of a wide range of modern sciences, including quantum computing, microwave photonics, spintronics, etc. To facilitate the design of chip-based microwave devices, there is an increasing demand for state-of-the-art microscopic techniques capable of characterizing the near-field microwave distribution and performance. In this work, we integrat…
▽ More
Advanced microwave technologies constitute the foundation of a wide range of modern sciences, including quantum computing, microwave photonics, spintronics, etc. To facilitate the design of chip-based microwave devices, there is an increasing demand for state-of-the-art microscopic techniques capable of characterizing the near-field microwave distribution and performance. In this work, we integrate Josephson junctions onto a nano-sized quartz tip, forming a highly sensitive microwave mixer on-tip. This allows us to conduct spectroscopic imaging of near-field microwave distributions with high spatial resolution. Leveraging its microwave-sensitive characteristics, our Josephson microscope achieves a broad detecting bandwidth of up to 200 GHz with remarkable frequency and intensity sensitivities. Our work emphasizes the benefits of utilizing the Josephson microscope as a real-time, non-destructive technique to advance integrated microwave electronics.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Phase-Coherent Charge Transport through a Porphyrin Nanoribbon
Authors:
Zhixin Chen,
Jie-Ren Deng,
Songjun Hou,
Xinya Bian,
Jacob L. Swett,
Qingqing Wu,
Jonathan Baugh,
G. Andrew D. Briggs,
Jan A. Mol,
Colin J. Lambert,
Harry L. Anderson,
James O. Thomas
Abstract:
Quantum interference in nano-electronic devices could lead to reduced-energy computing and efficient thermoelectric energy harvesting. When devices are shrunk down to the molecular level it is still unclear to what extent electron transmission is phase coherent, as molecules usually act as scattering centres, without the possibility of showing particle-wave duality. Here we show electron transmiss…
▽ More
Quantum interference in nano-electronic devices could lead to reduced-energy computing and efficient thermoelectric energy harvesting. When devices are shrunk down to the molecular level it is still unclear to what extent electron transmission is phase coherent, as molecules usually act as scattering centres, without the possibility of showing particle-wave duality. Here we show electron transmission remains phase coherent in molecular porphyrin nanoribbons, synthesized with perfectly defined geometry, connected to graphene electrodes. The device acts as a graphene Fabry-Pérot interferometer, allowing direct probing of the transport mechanisms throughout several regimes, including the Kondo one. Electrostatic gating allows measurement of the molecular conductance in multiple molecular oxidation states, demonstrating a thousand-fold increase of the current by interference, and unravelling molecular and graphene transport pathways. These results demonstrate a platform for the use of interferometric effects in single-molecule junctions, opening up new avenues for studying quantum coherence in molecular electronic and spintronic devices.
△ Less
Submitted 5 September, 2022; v1 submitted 17 May, 2022;
originally announced May 2022.
-
Observation of biradical spin coupling through hydrogen bonds
Authors:
Yang He,
Na Li,
Ivano E. Castelli,
Ruoning Li,
Yajie Zhang,
Xue Zhang,
Chao Li,
Bingwu Wang,
Song Gao,
Lianmao Peng,
Shimin Hou,
Ziyong Shen,
**g-Tao Lü,
Kai Wu,
Per Hedegård,
Yongfeng Wang
Abstract:
Investigation of intermolecular electron spin interaction is of fundamental importance in both science and technology.Here, radical pairs of all-trans retinoic acid molecules on Au(111) are created using an ultra-low temperature scanning tunneling microscope. Antiferromagnetic coupling between two radicals is identified by magnetic-field dependent spectroscopy.The measured exchange energies are fr…
▽ More
Investigation of intermolecular electron spin interaction is of fundamental importance in both science and technology.Here, radical pairs of all-trans retinoic acid molecules on Au(111) are created using an ultra-low temperature scanning tunneling microscope. Antiferromagnetic coupling between two radicals is identified by magnetic-field dependent spectroscopy.The measured exchange energies are from 0.1 to 1.0 meV. The biradical spin coupling is mediated through O-H$\cdots$O hydrogen bonds, as elucidated from analysis combining density functional theory calculation and a modern version of valence bond theory.
△ Less
Submitted 4 May, 2022;
originally announced May 2022.
-
Van der Waals Heterostructure Polaritons with moiré-Induced Nonlinearity
Authors:
Long Zhang,
Fengcheng Wu,
Shaocong Hou,
Zhe Zhang,
Yu-Hsun Chou,
Kenji Watanabe,
Takashi Taniguchi,
Stephen R. Forrest,
Hui Deng
Abstract:
Controlling matter-light interactions with cavities is of fundamental importance in modern science and technology. It is exemplified in the strong-coupling regime, where matter-light hybrid modes form, with properties controllable via the photon component on the optical-wavelength scale. In contrast, matter excitations on the nanometer scale are harder to access. In two-dimensional van der Waals h…
▽ More
Controlling matter-light interactions with cavities is of fundamental importance in modern science and technology. It is exemplified in the strong-coupling regime, where matter-light hybrid modes form, with properties controllable via the photon component on the optical-wavelength scale. In contrast, matter excitations on the nanometer scale are harder to access. In two-dimensional van der Waals heterostructures, a tunable moiré lattice potential for electronic excitations may form, enabling correlated electron gases in lattice potentials. Excitons confined in moiré lattices have also been reported, but cooperative effects have been elusive and interactions with light have remained perturbative. Here, integrating MoSe$_{2}$-WS$_{2}$ heterobilayers in a microcavity, we establish cooperative coupling between moiré-lattice excitons and microcavity photons up to liquid-nitrogen temperature, thereby integrating into one platform versatile control over both matter and light. The density dependence of the moiré polaritons reveals strong nonlinearity due to exciton blockade, suppressed exciton energy shift, and suppressed excitation-induced dephasing, all of which are consistent with the quantum-confined nature of the moiré excitons. Such a moiré polariton system combines strong nonlinearity and microscopic-scale tuning of matter excitations with the power of cavity engineering and long range coherence of light, providing a new platform for collective phenomena from tunable arrays of quantum emitters.
△ Less
Submitted 31 October, 2021;
originally announced November 2021.
-
Thermal Conductivity of BAs under Pressure
Authors:
Songrui Hou,
Bo Sun,
Fei Tian,
Qingan Cai,
Shanming Wang,
Wanyue Peng,
Xi Chen,
Zhifeng Ren,
Chen Li,
Richard Wilson
Abstract:
The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BA…
▽ More
The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BAs from 0 to 30 GPa. Thermal conductivity vs. pressure of BAs is measured by time-domain thermoreflectance with a diamond anvil cell. In stark contrast to what is typical for nonmetallic crystals, BAs is observed to have a pressure independent thermal conductivity below 30 GPa. The thermal conductivity of nonmetallic crystals typically increases upon compression. The unusual pressure independence of thermal conductivity of BAs shows the important relationship between phonon dispersion properties and three- and four-phonon scattering rates.
△ Less
Submitted 16 February, 2023; v1 submitted 1 October, 2021;
originally announced October 2021.
-
Hybrid density functional study of band gap engineering of SrTiO3 photocatalyst via do** for water splitting
Authors:
Y. S. Hou,
S. Ardo,
R. Q. Wu
Abstract:
Perovskite SrTiO3 (STO) is an attractive photocatalyst for solar water splitting, but suffers from a limited photoresponse in the ultraviolet spectral range due to its wide band gap. By means of hybrid density functional theory calculations, we systematically study engineering its band gap via do** 4d and 5d transition metals M (M=Zr, Nb, Mo, Tc, Ru, Rh, Pd, Hf, Ta, W, Re, Os, Ir and Pt) and cha…
▽ More
Perovskite SrTiO3 (STO) is an attractive photocatalyst for solar water splitting, but suffers from a limited photoresponse in the ultraviolet spectral range due to its wide band gap. By means of hybrid density functional theory calculations, we systematically study engineering its band gap via do** 4d and 5d transition metals M (M=Zr, Nb, Mo, Tc, Ru, Rh, Pd, Hf, Ta, W, Re, Os, Ir and Pt) and chalcogen elements Y (Y=S and Se). We find that transition metal dopant M either has no effect on STO band gap or introduces detrimental mid-gap states, except for Pd and Pt that are able to reduce the STO band gap. In contrast, do** S and Se significantly reduces STO's direct band gap, thus leading to appreciable optical absorption transitions in the visible spectral range. Our findings provide that Pd, S and Se doped STO are potential promising photocatalysts for water splitting under visible light irradiation, thereby providing insightful theoretical guides for experiments to improve the photocatalytic activity of STO.
△ Less
Submitted 28 May, 2021;
originally announced May 2021.
-
Alloying V in MnBi$_2$Te$_4$ for Robust Ferromagnetic Coupling and Quantum Anomalous Hall Effect
Authors:
Y. S. Hou,
R. Q. Wu
Abstract:
The intrinsic antiferromagnetic (AFM) interlayer coupling in two-dimensional magnetic topological insulator MnBi$_2$Te$_4$ places a restriction on realizing stable quantum anomalous Hall effect (QAHE) [Y. Deng et al., Science 367, 895 (2020)]. Through density functional theory calculations, we demonstrate the possibility of tuning the AFM coupling to the ferromagnetic coupling in MnBi$_2$Te$_4$ fi…
▽ More
The intrinsic antiferromagnetic (AFM) interlayer coupling in two-dimensional magnetic topological insulator MnBi$_2$Te$_4$ places a restriction on realizing stable quantum anomalous Hall effect (QAHE) [Y. Deng et al., Science 367, 895 (2020)]. Through density functional theory calculations, we demonstrate the possibility of tuning the AFM coupling to the ferromagnetic coupling in MnBi$_2$Te$_4$ films by alloying about 50% V with Mn. As a result, QAHE can be achieved without alternation with the even or odd septuple layers. This provides a practical strategy to get robust QAHE in ultrathin MnBi$_2$Te$_4$ films, rendering them attractive for technological innovations.
△ Less
Submitted 16 April, 2020; v1 submitted 9 April, 2020;
originally announced April 2020.
-
Simulating Noisy Quantum Circuits with Matrix Product Density Operators
Authors:
Song Cheng,
Chenfeng Cao,
Chao Zhang,
Yongxiang Liu,
Shi-Yao Hou,
Pengxiang Xu,
Bei Zeng
Abstract:
Simulating quantum circuits with classical computers requires resources growing exponentially in terms of system size. Real quantum computer with noise, however, may be simulated polynomially with various methods considering different noise models. In this work, we simulate random quantum circuits in 1D with Matrix Product Density Operators (MPDO), for different noise models such as dephasing, dep…
▽ More
Simulating quantum circuits with classical computers requires resources growing exponentially in terms of system size. Real quantum computer with noise, however, may be simulated polynomially with various methods considering different noise models. In this work, we simulate random quantum circuits in 1D with Matrix Product Density Operators (MPDO), for different noise models such as dephasing, depolarizing, and amplitude dam**. We show that the method based on Matrix Product States (MPS) fails to approximate the noisy output quantum states for any of the noise models considered, while the MPDO method approximates them well. Compared with the method of Matrix Product Operators (MPO), the MPDO method reflects a clear physical picture of noise (with inner indices taking care of the noise simulation) and quantum entanglement (with bond indices taking care of two-qubit gate simulation). Consequently, in case of weak system noise, the resource cost of MPDO will be significantly less than that of the MPO due to a relatively small inner dimension needed for the simulation. In case of strong system noise, a relatively small bond dimension may be sufficient to simulate the noisy circuits, indicating a regime that the noise is large enough for an `easy' classical simulation. Moreover, we propose a more effective tensor updates scheme with optimal truncations for both the inner and the bond dimensions, performed after each layer of the circuit, which enjoys a canonical form of the MPDO for improving simulation accuracy. With truncated inner dimension to a maximum value $κ$ and bond dimension to a maximum value $χ$, the cost of our simulation scales as $\sim NDκ^3χ^3$, for an $N$-qubit circuit with depth $D$.
△ Less
Submitted 19 November, 2020; v1 submitted 5 April, 2020;
originally announced April 2020.
-
Vector exceptional points with strong superchiral fields
Authors:
Tong Wu,
Weixuan Zhang,
Huizhen Zhang,
Saisai Hou,
Guangyuan Chen,
Ruibin Liu,
Cuicui Lu,
Jiafang Li,
Rongyao Wang,
Pengfei Duan,
Junjie Li,
Bo Wang,
Lei Shi,
Jian Zi,
Xiangdong Zhang
Abstract:
Exceptional points(EPs), branch points of complex energy surfaces at which eigenvalues and eigenvectors coalesce, are ubiquitous in non-Hermitian systems. Many novel properties and applications have been proposed around the EPs. One of the important applications is to enhance the detection sensitivity. However, due to the lack of single-handed superchiral fields, all of the proposed EP-based sensi…
▽ More
Exceptional points(EPs), branch points of complex energy surfaces at which eigenvalues and eigenvectors coalesce, are ubiquitous in non-Hermitian systems. Many novel properties and applications have been proposed around the EPs. One of the important applications is to enhance the detection sensitivity. However, due to the lack of single-handed superchiral fields, all of the proposed EP-based sensing mechanisms are only useful for the non-chiral discrimination. Here, we propose theoretically and demonstrate experimentally a new type of EP, which is a called radiation vector EP, to fulfill the homogeneous superchiral fields for chiral sensing. This type of EP is realized by suitably tuning the coupling strength and radiation losses for a pair of orthogonal polarization modes in the photonic crystal slab. Based on the unique modal-coupling property at the vector EP, we demonstrate that the uniform superchiral fields can be generated with two beams of lights illuminating on the photonic crystal slab from opposite directions. Thus, the designed photonic crystal slab, which supports the vector EP, can be used to perform surface-enhanced chiral detection. Our findings provide a new strategy for ultrasensitive characterization and quantification of molecular chirality, a key aspect for various bioscience and biomedicine applications.
△ Less
Submitted 27 February, 2020;
originally announced February 2020.
-
Moiré lattice-induced formation and tuning of hybrid dipolar excitons in twisted WS$_2$/MoSe$_2$ heterobilayers
Authors:
Long Zhang,
Zhe Zhang,
Fengcheng Wu,
Danqing Wang,
Rahul Gogna,
Shaocong Hou,
Kenji Watanabe,
Takashi Taniguchi,
Krishnamurthy Kulkarni,
Thomas Kuo,
Stephen R. Forrest,
Hui Deng
Abstract:
Moiré superlattices formed in van der Waals bilayers have enabled the creation and manipulation of new quantum states, as is exemplified by the discovery of superconducting and correlated insulating states in twisted bilayer graphene near the magic angle. Twisted bilayer semiconductors may lead to tunable exciton lattices and topological states, yet signatures of moiré excitons have been reported…
▽ More
Moiré superlattices formed in van der Waals bilayers have enabled the creation and manipulation of new quantum states, as is exemplified by the discovery of superconducting and correlated insulating states in twisted bilayer graphene near the magic angle. Twisted bilayer semiconductors may lead to tunable exciton lattices and topological states, yet signatures of moiré excitons have been reported only in closely angularly-aligned bilayers. Here we report tuning of moiré lattice in WS$_{2}$ /MoSe$_{2}$ bilayers over a wide range of twist angles, leading to the continuous tuning of moiré lattice induced interlayer excitons and their hybridization with optically bright intralayer excitons. A pronounced revival of the hybrid excitons takes place near commensurate twist angles, 21.8°and 38.2°, due to interlayer tunneling between states connected by a moiré reciprocal lattice vector. From the angle dependence, we obtain the effective mass of the interlayer excitons and the electron inter-layer tunneling strength. These findings pave the way for understanding and engineering rich moiré-lattice induced phenomena in angle-twisted semiconductor van dar Waals heterostructures.
△ Less
Submitted 22 November, 2019;
originally announced November 2019.
-
First-principles studies of spin-phonon coupling in Cr2Ge2Te6 monolayer
Authors:
B. H. Zhang,
Y. S. Hou,
Z. Wang,
R. Q. Wu
Abstract:
We perform systematic first-principles calculations to investigate the spin-phonon coupling (SPC) of Cr2Ge2Te6 (CGT) monolayer (ML). It is found that the Eg phonon mode at 211.8 cm^{-1} may have a SPC as large as 3.19 cm^{-1}, as it directly alters the superexchange interaction along the Cr-Te-Cr pathway. Furthermore, the strength of SPC of the CGT ML can be further enhanced by an in-plane compres…
▽ More
We perform systematic first-principles calculations to investigate the spin-phonon coupling (SPC) of Cr2Ge2Te6 (CGT) monolayer (ML). It is found that the Eg phonon mode at 211.8 cm^{-1} may have a SPC as large as 3.19 cm^{-1}, as it directly alters the superexchange interaction along the Cr-Te-Cr pathway. Furthermore, the strength of SPC of the CGT ML can be further enhanced by an in-plane compressive strain. These results provide useful insights for the understanding of SPC in novel two-dimensional magnetic semiconductors and may guide the design of spintronic and spin Seebeck materials and devices.
△ Less
Submitted 27 September, 2019;
originally announced September 2019.
-
Manipulating Coherent Light Matter Interaction: Continuous Transition between Strong Coupling and Weak Coupling in MoS2 Monolayer Coupled with Plasmonic Nanocavities
Authors:
Songyan Hou,
Xingli Wang,
Landobasa Y. M. Tobing,
Zhenwei Xie,
Junhong Yu,
** Zhou,
Daohua Zhang,
Cuong Dang,
Philippe Coquet,
Beng Kang Tay,
Muhammad Danang Birowosuto,
Edwin Hang Tong Teo,
Hong Wang
Abstract:
Strong interactions between surface plasmons in ultra-compact nanocavities and excitons in two dimensional materials have attracted wide interests for its prospective realization of polariton devices at room temperature. Here, we propose a continuous transition from weak coupling to strong coupling between excitons in MoS2 monolayer and highly localized plasmons in ultra-compact nanoantenna. The n…
▽ More
Strong interactions between surface plasmons in ultra-compact nanocavities and excitons in two dimensional materials have attracted wide interests for its prospective realization of polariton devices at room temperature. Here, we propose a continuous transition from weak coupling to strong coupling between excitons in MoS2 monolayer and highly localized plasmons in ultra-compact nanoantenna. The nanoantenna is assembled by a silver nanocube positioned over a gold film and separated by a dielectric spacer layer. We observed a 1570-fold enhancement in the photoluminescence at weak coupling regime in hybrid nanocavities with thick spacer layers. The interaction between excitons and plasmons is then directly prompted to strong coupling regime by shrinking down the thickness of spacer layer. Room temperature formation of polaritons with Rabi splitting up to 190 meV was observed, which is the largest plasmon-exciton Rabi splitting reported in two dimensional materials. Numerical calculations quantified the relation between coupling strength, local density of states and spacer thickness, and revealed the transition between weak coupling and strong coupling in nanocavities. The findings in this work offer a guideline for feasible designs of plasmon-exciton interaction systems with gap plasmonic cavities.
△ Less
Submitted 21 August, 2019; v1 submitted 23 April, 2019;
originally announced April 2019.
-
Strongly Enhanced Gilbert Dam** in 3d Transition Metal Ferromagnet Monolayers in Contact with Topological Insulator Bi2Se3
Authors:
Y. S. Hou,
R. Q. Wu
Abstract:
Engineering Gilbert dam** of ferromagnetic metal films is of great importance to exploit and design spintronic devices that are operated with an ultrahigh speed. Based on scattering theory of Gilbert dam**, we extend the torque method originally used in studies of magnetocrystalline anisotropy to theoretically determine Gilbert dam**s of ferromagnetic metals. This method is utilized to inves…
▽ More
Engineering Gilbert dam** of ferromagnetic metal films is of great importance to exploit and design spintronic devices that are operated with an ultrahigh speed. Based on scattering theory of Gilbert dam**, we extend the torque method originally used in studies of magnetocrystalline anisotropy to theoretically determine Gilbert dam**s of ferromagnetic metals. This method is utilized to investigate Gilbert dam**s of 3d transition metal ferromagnet iron, cobalt and nickel monolayers that are contacted by the prototypical topological insulator Bi2Se3. Amazingly, we find that their Gilbert dam**s are strongly enhanced by about one order in magnitude, compared with dam**s of their bulks and free-standing monolayers, owing to the strong spin-orbit coupling of Bi2Se3. Our work provides an attractive route to tailoring Gilbert dam** of ferromagnetic metallic films by putting them in contact with topological insulators.
△ Less
Submitted 22 February, 2019;
originally announced February 2019.
-
Axion Insulator State with ferromagnetic ordering in CrI3/Bi2Se3/MnBi2Se4 Heterostructure
Authors:
Y. S. Hou,
R. Q. Wu
Abstract:
Realizing axion insulator state with a uniform magnetization considerably facilitates experimental explorations of the intriguing topological magnetoelectric effect, a hallmark of three-dimensional (3D) topological insulators (TIs). Through density functional theory calculations and four-band model studies, we find that magnetic ions Cr3+ in monolayer CrI3 and Mn2+ in septuple-layer MnBi2Se4 have…
▽ More
Realizing axion insulator state with a uniform magnetization considerably facilitates experimental explorations of the intriguing topological magnetoelectric effect, a hallmark of three-dimensional (3D) topological insulators (TIs). Through density functional theory calculations and four-band model studies, we find that magnetic ions Cr3+ in monolayer CrI3 and Mn2+ in septuple-layer MnBi2Se4 have opposite exchange couplings to the topological surface states of 3D TI Bi2Se3. As an exciting result of such opposite exchange couplings, axion insulator state is realized by a uniform magnetization in CrI3/Bi2Se3/MnBi2Se4 heterostructure. Our work opens up opportunities for exploring topological magnetoelectric effect realized by the uniform magnetization induced axion insulator state in heterostructures of 3D TIs and two-dimensional van der Waals ferromagnetic insulators.
△ Less
Submitted 2 March, 2020; v1 submitted 8 February, 2019;
originally announced February 2019.
-
Axion Insulator State in a Ferromagnet/Topological Insulator/Antiferromagnet Heterostructure
Authors:
Y. S. Hou,
R. Q. Wu
Abstract:
We propose to use ferromagnetic insulator MnBi2Se4/Bi2Se3/antiferromagnetic insulator Mn2Bi2Se5 heterostructures for the realization of the axion insulator state. Importantly, the axion insulator state in such heterostructures only depends on the magnetization of the ferromagnetic insulator and hence can be observed in a wide range of external magnetic field. Using density functional calculations…
▽ More
We propose to use ferromagnetic insulator MnBi2Se4/Bi2Se3/antiferromagnetic insulator Mn2Bi2Se5 heterostructures for the realization of the axion insulator state. Importantly, the axion insulator state in such heterostructures only depends on the magnetization of the ferromagnetic insulator and hence can be observed in a wide range of external magnetic field. Using density functional calculations and model Hamiltonian simulations, we find that the top and bottom surfaces have opposite half-quantum Hall conductance, with a sizable global spin gap of 5.1 meV opened for the topological surface states of Bi2Se3. Our work provides a new strategy for the search of axion insulators by using van der Waals antiferromagnetic insulators along with three-dimensional topological insulators.
△ Less
Submitted 16 October, 2018; v1 submitted 24 September, 2018;
originally announced September 2018.
-
First-principles Study on the Magnetic Interactions in Honeycomb Na2IrO3
Authors:
Y. S. Hou,
J. H. Yang,
H. J. Xiang,
X. G. Gong
Abstract:
Honeycomb iridate Na2IrO3, a Jeff=1/2 magnet, is a potential platform for realizing the quantum spin liquid. Many experiments have shown that its magnetic ground state has a zigzag antiferromagnetic (AFM) order. However, there is still a lack of consensus on the theoretical model explaining such order, since its second nearest neighbor (NN) and long-range third NN magnetic interactions are highly…
▽ More
Honeycomb iridate Na2IrO3, a Jeff=1/2 magnet, is a potential platform for realizing the quantum spin liquid. Many experiments have shown that its magnetic ground state has a zigzag antiferromagnetic (AFM) order. However, there is still a lack of consensus on the theoretical model explaining such order, since its second nearest neighbor (NN) and long-range third NN magnetic interactions are highly unclear. By properly taking into account the orbital moments, achieved through constraining their directions in the first-principles calculations, we obtain that the relative angle between orbital and spin moments is fairly small and in the order of several degrees, which thus validates the Jeff=1/2 state in Na2IrO3. Surprisingly, we find that the long-range third NN Heisenberg interactions are sizable whereas the second NN magnetic interactions are negligible. Using maximally localized Wannier functions, we show that the sizable long-range third NN Heisenberg interaction results from the extended nature of the Jeff=1/2 state. Based on our study, we propose a minimal J1-K1-Γ_1-J3 model in which the magnetic excitations have an intensity peak at 5.6 meV, consistent with the inelastic neutron scattering experiment [Phys. Rev. Lett. 108, 127204 (2012)]. The present work demonstrates again that constraining orbital moments in the first-principles calculations is powerful to investigate the intriguing magnetism in the Jeff=1/2 magnets, and paves the way toward gaining a deep insight into the novel magnetism discovered in the honeycomb Jeff=1/2 magnets.
△ Less
Submitted 30 June, 2018;
originally announced July 2018.
-
Bound state and Localization of excitation in many-body open systems
Authors:
H. T. Cui,
H. Z. Shen,
S. C. Hou,
X. X. Yi
Abstract:
Bound state and time evolution for single excitation in one dimensional XXZ spin chain within non-Markovian reservoir are studied exactly. As for bound state, a common feature is the localization of single excitation, which means the spontaneous emission of excitation into reservoir is prohibited. Exceptionally the pseudo-bound state can always be found, for which the single excitation has a finit…
▽ More
Bound state and time evolution for single excitation in one dimensional XXZ spin chain within non-Markovian reservoir are studied exactly. As for bound state, a common feature is the localization of single excitation, which means the spontaneous emission of excitation into reservoir is prohibited. Exceptionally the pseudo-bound state can always be found, for which the single excitation has a finite probability emitted into reservoir. We argue that under limit $N\rightarrow \infty$ the pseudo-bound bound state characterizes an equilibrium between the localization in spin chain and spontaneous emission into reservoir. In addition, a critical energy scale for bound states is also identified, below which only one bound state exists and it also is pseudo-bound state. The effect of quasirandom disorder is also discussed. It is found in this case that the single excitation is more inclined to locate at some spin sites. Thus a many-body-localization like behavior can be found. In order to display the effect of bound state and disorder on the preservation of quantum information, the time evolution of single excitation in spin chain studied exactly by numerically solving the evolution equation. A striking observation is that the excitation can be stayed at its initial location with a probability more than 0.9 when the bound state and disorder coexist. However if any one of the two issues is absent, the information of initial state can be erased completely or becomes mixed. Our finding shows that the combination of bound state and disorder can provide an ideal mechanism for quantum memory.
△ Less
Submitted 7 December, 2017;
originally announced December 2017.
-
Simulating Quantum Spin Hall Effect in Topological Lieb Lattice of Linear Circuit
Authors:
Weiwei Zhu,
Shanshan Hou,
Yang Long,
Hong Chen,
Jie Ren
Abstract:
Inspired by the topological insulator circuit proposed and experimentally verified by Jia., et al. \cite{1}, we theoretically realized the topological Lieb lattice, a line centered square lattice with rich topological properties, in a radio-frequency circuit. We open the topological nontrivial band-gap through specific capacitor-inductor network, which resembles adding intrinsic spin orbit couplin…
▽ More
Inspired by the topological insulator circuit proposed and experimentally verified by Jia., et al. \cite{1}, we theoretically realized the topological Lieb lattice, a line centered square lattice with rich topological properties, in a radio-frequency circuit. We open the topological nontrivial band-gap through specific capacitor-inductor network, which resembles adding intrinsic spin orbit coupling term into the tight binding model. Finally, we discuss the extension of the $φ=π/2$ phase change of hop** between sites to arbitrary value, and investigate the topological phase transition of the band structure vary with capacitance, thereby paving the way for designing tunable lattices using the presented framework.
△ Less
Submitted 3 April, 2018; v1 submitted 19 October, 2017;
originally announced October 2017.
-
A theoretical and numerical study of gravity driven coating flow on cylinder and sphere: fingering instability
Authors:
Shuo Hou
Abstract:
To find the regularities of formed fingers in gravity driven coating flows on upper cylinder and sphere, the mathematical formulation to model the fingering instability on cylindrical or spherical surface which consists of a capillary wave equation and a linear perturbation equation is constructed, based on the leading order governing equation in standard cylindrical or spherical coordinate system…
▽ More
To find the regularities of formed fingers in gravity driven coating flows on upper cylinder and sphere, the mathematical formulation to model the fingering instability on cylindrical or spherical surface which consists of a capillary wave equation and a linear perturbation equation is constructed, based on the leading order governing equation in standard cylindrical or spherical coordinate system. A disjoining pressure model is introduced to simulate the partial wetting process near moving contact line. The fingering number in high $Bo$ coating flow is focused on from a linear perspective. Using an asymptotic theory, the high $Bo$ limits of the linear perturbation equations for both the cylindrical and spherical problems are proved to degenerate into a common eigenvalue problem. Two analytical formulae concerning the most unstable wave number which can be described as two power laws are derived via a method of modal analysis for the cylindrical and spherical problem, respectively. These formulae provide a succinct method to estimate the fingering number if the onset of the fingering instability is known. A method of transient growth analysis which makes no high $Bo$ assumptions is used to verify the accuracy of the asymptotic theory and modal analysis. In particular, an asymptotic behavior of the most unstable wave number as $Bo$ increases is highlighted. We show that the linear growth rate may be improved by the disjoining pressure, which can be attributed to the effect of partial wetting, but the most unstable wave number is insensitive to the wetting model.
△ Less
Submitted 11 August, 2017;
originally announced August 2017.
-
A theoretical and numerical study of gravity driven coating flow on cylinder and sphere: two-dimensional and axisymmetric capillary waves
Authors:
Shuo Hou
Abstract:
The theoretical and numerical models for gravity driven coating flow on upper cylinder and sphere are formulated. Using a perturbation method, the governing equations which depend on one Bond number $Bo$ are derived for a liquid film flow down the outside of a horizontal cylinder and a sphere. They can be simplified to one-dimensional form due to the symmetries. The general structure of the two-di…
▽ More
The theoretical and numerical models for gravity driven coating flow on upper cylinder and sphere are formulated. Using a perturbation method, the governing equations which depend on one Bond number $Bo$ are derived for a liquid film flow down the outside of a horizontal cylinder and a sphere. They can be simplified to one-dimensional form due to the symmetries. The general structure of the two-dimensional and axisymmetric capillary waves under high $Bo$ condition is focused on. An asymptotic theory is used to solve for the free-surface profiles in the outer and inner region, respectively. Even though the evolution in the outer region is essentially different, there are inherent similarities in the inner region because the capillary ridges are proved to degenerate into the one-parameter family in high $Bo$ limit. Using appropriate numerical techniques, some parametric studies are performed on the profiles of the capillary waves. The spreading of the front recorded from the outer solutions quantitatively accords with the scaling laws in a top region at early time, but deviates obviously at later time. The comparison between the composite solutions constructed using the asymptotic theory and direct solutions calculated from the evolution equations is highlighted via both the global and local features. Agreement between the composite solutions and the direct solutions is good for high $Bo$ cases. This asymptotic behavior is common on both of cylindrical and spherical surfaces and not affected by the partial wetting process.
△ Less
Submitted 31 July, 2017;
originally announced July 2017.
-
Unveiling Magnetic Interactions of Ruthenium Trichloride via Constraining Direction of Orbital moments: Potential Routes to Realize Quantum Spin Liquid
Authors:
Y. S. Hou,
H. J. Xiang,
X. G. Gong
Abstract:
Recent experiments reveal that the honeycomb ruthenium trichloride α-RuCl3 is a prime candidate of the Kitaev quantum spin liquid (QSL). However, there is no theoretical model which can properly describe its experimental dynamical response, due to the lack of a full understanding of its magnetic interactions. Here, we propose a general scheme to calculate the magnetic interactions in systems (e.g.…
▽ More
Recent experiments reveal that the honeycomb ruthenium trichloride α-RuCl3 is a prime candidate of the Kitaev quantum spin liquid (QSL). However, there is no theoretical model which can properly describe its experimental dynamical response, due to the lack of a full understanding of its magnetic interactions. Here, we propose a general scheme to calculate the magnetic interactions in systems (e.g., α-RuCl3) with non-negligible orbital moments by constraining the directions of orbital moments. With this scheme, we put forward a minimal J1-K1-Γ1-J3-K3 model for α-RuCl3 and find that: (I) The third nearest neighbor (NN) antiferromagnetic Heisenberg interaction J3 stabilizes the zigzag antiferromagnetic order; (II) The NN symmetric off-diagonal exchange Γ1 plays a pivotal role in determining the preferred direction of magnetic moments and generating the spin wave gap. Exact diagonalization study on this model shows that the Kitaev QSL can be realized by suppressing the NN symmetric off-diagonal exchange Γ1 and the third NN Heisenberg interaction J3. Thus, we not only propose a powerful general scheme for investigating the intriguing magnetism of Jeff=1/2 magnets, but also point out future directions for realizing the Kitaev QSL in the honeycomb ruthenium trichloride α-RuCl3.
△ Less
Submitted 2 December, 2016;
originally announced December 2016.
-
Hydrolytic degradation of ROMP thermosetting materials catalysed by bio-derived acids and enzyme: from network to linear materials
Authors:
S. Hou,
D. M. Hoyle,
E. Khosravi,
C. J. Blackwell,
K. Haernvall,
V. Perz,
G. M. Guebitz
Abstract:
This paper reports the first example of the degradable ROMP thermosetting materials catalysed by bio-derived acids and cutinase from Thermobifida cellulosilytica (Thc_Cut1). The ROMP thermosetting materials are based on norbornene dicarboximides containing acetal ester groups only in the crosslink moiety. The insoluble cross-linked materials were subjected to acid-catalysed hydrolysis using bio-de…
▽ More
This paper reports the first example of the degradable ROMP thermosetting materials catalysed by bio-derived acids and cutinase from Thermobifida cellulosilytica (Thc_Cut1). The ROMP thermosetting materials are based on norbornene dicarboximides containing acetal ester groups only in the crosslink moiety. The insoluble cross-linked materials were subjected to acid-catalysed hydrolysis using bio-derived acetic and citric acids as well as enzymatic degradation using Thc_Cut1, resulting in the materials becoming completely soluble in dichloromethane. 1H NMR and rheological analysis performed on materials after acid-catalysed hydrolysis showed characteristics indistinguishable to that of the linear polymer analogues. These analyses confirmed the cleavage of the crosslink moiety upon degradation with the main backbone chains remaining intact. The glass transition temperatures of the polymer materials after acid-catalysed hydrolysis were the same of those observed for the linear polymer analogue. TGA showed that the cross-linked polymers thermally stable to 150 °C, beyond which showed weight losses due to the thermal cleavage of the acetal ester linkages.
△ Less
Submitted 9 June, 2016; v1 submitted 10 March, 2016;
originally announced March 2016.
-
Theoretical study of the elastic and thermodynamic properties of Pt$_{3}$Al with the L1$_{2}$ structure under high pressure
Authors:
N. Wei,
Ch. Zhang,
S. Hou
Abstract:
In this work, the elastic and thermodynamic properties of Pt$_{3}$Al under high pressure are investigated using density functional theory within the generalized gradient approximation. The results of bulk modulus and elastic constants at zero pressure are in good agreement with the available theoretical and experimental values. Under high pressure, all the elastic constants meet the corresponding…
▽ More
In this work, the elastic and thermodynamic properties of Pt$_{3}$Al under high pressure are investigated using density functional theory within the generalized gradient approximation. The results of bulk modulus and elastic constants at zero pressure are in good agreement with the available theoretical and experimental values. Under high pressure, all the elastic constants meet the corresponding mechanical stability criteria, meaning that Pt$_{3}$Al possesses mechanical stability. In addition, the elastic constants and elastic modulus increase linearly with the applied pressure. According to the Poisson's ratio $ν$ and elastic modulus ratio ($B/G$), Pt$_{3}$Al alloy is found to be ductile, and higher pressure can significantly enhance the ductility. Those indicate that the elastic properties of Pt$_{3}$Al will be improved under high pressure. Through the quasi-harmonic Debye model, we first successfully report the variations of the Debye temperature $Θ_\textrm{D}$, specific heats $C_{P}$, thermal expansion coefficient $α$, and Grüneisen parameter $γ$ under pressure range from 0 to 100 GPa and temperature range from 0 to 1000 K.
△ Less
Submitted 24 December, 2015;
originally announced December 2015.
-
Current-induced energy barrier suppression for electromigration from first principles
Authors:
Ruoxing Zhang,
Ivan Rungger,
Stefano Sanvito,
Shimin Hou
Abstract:
We present an efficient method for evaluating current-induced forces in nanoscale junctions, which naturally integrates into the non-equilibrium Green's function formalism implemented within density functional theory. This allows us to perform dynamical atomic relaxation in the presence of an electric current while also evaluating the current-voltage characteristics. The central idea consists in e…
▽ More
We present an efficient method for evaluating current-induced forces in nanoscale junctions, which naturally integrates into the non-equilibrium Green's function formalism implemented within density functional theory. This allows us to perform dynamical atomic relaxation in the presence of an electric current while also evaluating the current-voltage characteristics. The central idea consists in expressing the system energy density matrix in terms of Green's functions. In order to validate our implementation we perform a series of benchmark calculations, both at zero and finite bias. Firstly we evaluate the current-induced forces acting over an Al nanowire and compare them with previously published results for fixed geometries. Then we perform structural relaxation of the same wires under bias and determine the critical voltage at which they break. We find that, while a perfectly straight wire does not break at any of the voltages considered, a zigzag wire is more fragile and snaps at 1.4 V, with the Al atoms moving against the electron flow. Finally we demonstrate the capability of our scheme to tackle the electromigration problem by studying the current-induced motion of a single Si atom covalently attached to the sidewall of a (4,4) armchair single-walled carbon nanotube. Our calculations indicate that if Si is attached along the current path, then current-induced forces can induce migration. In contrast, if the bonding site is away from the current path, then the adatom will remain stable regardless of the voltage. An analysis based on decomposing the total force into a wind and an electrostatic component, as well as on a detailed evaluation of the bond currents, shows that this remarkable electromigration phenomenon is due solely to the position-dependent wind force.
△ Less
Submitted 4 July, 2011;
originally announced July 2011.
-
First-principles calculation on the transport properties of molecular wires between Au clusters under equilibrium
Authors:
Zhanyu Ning,
**gzhe Chen,
Shimin Hou,
Jiaxing Zhang,
Zhenyu Liang,
** Zhang,
Rushan Han
Abstract:
Based on the matrix Green's function method combined with hybrid tight-binding / density functional theory, we calculate the conductances of a series of gold-dithiol molecule-gold junctions including benzenedithiol (BDT), benzenedimethanethiol (BDMT), hexanedithiol (HDT), octanedithiol (ODT) and decanedithiol (DDT). An atomically-contacted extended molecule model is used in our calculation. As a…
▽ More
Based on the matrix Green's function method combined with hybrid tight-binding / density functional theory, we calculate the conductances of a series of gold-dithiol molecule-gold junctions including benzenedithiol (BDT), benzenedimethanethiol (BDMT), hexanedithiol (HDT), octanedithiol (ODT) and decanedithiol (DDT). An atomically-contacted extended molecule model is used in our calculation. As an important procedure, we determine the position of the Fermi level by the energy reference according to the results from ultraviolet photoelectron spectroscopy (UPS) experiments. After considering the experimental uncertainty in UPS measurement, the calculated results of molecular conductances near the Fermi level qualitatively agree with the experimental values measured by Tao et. al. [{\it Science} 301, 1221 (2003); {\it J. Am. Chem. Soc.} 125, 16164 (2003); {\it Nano. Lett.} 4, 267 (2004).]
△ Less
Submitted 12 July, 2005; v1 submitted 22 April, 2005;
originally announced April 2005.
