Showing 1–8 of 8 results for author: Hornibrook, J

Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device

Authors: Morteza Aghaee, Alejandro Alcaraz Ramirez, Zulfi Alam, Rizwan Ali, Mariusz Andrzejczuk, Andrey Antipov, Mikhail Astafev, Amin Barzegar, Bela Bauer, Jonathan Becker, Umesh Kumar Bhaskar, Alex Bocharov, Srini Boddapati, David Bohn, Jouri Bommer, Leo Bourdet, Arnaud Bousquet, Samuel Boutin, Lucas Casparis, Benjamin James Chapman, Sohail Chatoor, Anna Wulff Christensen, Cassandra Chua, Patrick Codd, William Cole , et al. (137 additional authors not shown)

Abstract: The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostruct… ▽ More The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%. △ Less

Submitted 2 April, 2024; v1 submitted 17 January, 2024; originally announced January 2024.

Comments: Added data on a second measurement of device A and a measurement of device B, expanded discussion of a trivial scenario. Refs added, author list updated

Characterising Quantum Devices at Scale with Custom Cryo-CMOS

Authors: S. J. Pauka, K. Das, J. M. Hornibrook, G. C. Gardner, M. J. Manfra, M. C. Cassidy, D. J. Reilly

Abstract: We make use of a custom-designed cryo-CMOS multiplexer (MUX) to enable multiple quantum devices to be characterized in a single cool-down of a dilution refrigerator. Combined with a packaging approach that integrates cryo-CMOS chips and a hot-swappable, parallel device test platform, we describe how this setup takes a standard wiring configuration as input and expands the capability for batch-char… ▽ More We make use of a custom-designed cryo-CMOS multiplexer (MUX) to enable multiple quantum devices to be characterized in a single cool-down of a dilution refrigerator. Combined with a packaging approach that integrates cryo-CMOS chips and a hot-swappable, parallel device test platform, we describe how this setup takes a standard wiring configuration as input and expands the capability for batch-characterization of quantum devices at milli-Kelvin temperatures and high magnetic fields. The architecture of the cryo-CMOS multiplexer is discussed and performance benchmarked using few-electron quantum dots and Hall mobility-map** measurements. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Flexible superconducting Nb transmission lines on thin film polyimide for quantum computing applications

Authors: David B. Tuckerman, Michael C. Hamilton, David J. Reilly, Rujun Bai, George A. Hernandez, John M. Hornibrook, John A. Sellers, Charles D. Ellis

Abstract: We describe progress and initial results achieved towards the goal of develo** integrated multi-conductor arrays of shielded controlled-impedance flexible superconducting transmission lines with ultra-miniature cross sections and wide bandwidths (dc to >10 GHz) over meter-scale lengths. Intended primarily for use in future scaled-up quantum computing systems, such flexible thin-film Nb/polyimide… ▽ More We describe progress and initial results achieved towards the goal of develo** integrated multi-conductor arrays of shielded controlled-impedance flexible superconducting transmission lines with ultra-miniature cross sections and wide bandwidths (dc to >10 GHz) over meter-scale lengths. Intended primarily for use in future scaled-up quantum computing systems, such flexible thin-film Nb/polyimide ribbon cables provide a physically compact and ultra-low thermal conductance alternative to the rapidly increasing number of discrete coaxial cables that are currently used by quantum computing experimentalists to transmit signals between the low-temperature stages (from ~ 4 K down to ~ 20 mK) of a dilution refrigerator. S-parameters are presented for 2-metal layer Nb microstrip structures with lengths ranging up to 550 mm. Weakly coupled open-circuit microstrip resonators provided a sensitive measure of the overall transmission line loss as a function of frequency, temperature, and power. Two common polyimide dielectrics, one conventional and the other photo-definable (PI-2611 and HD-4100, respectively) were compared. Our most striking result, not previously reported to our knowledge, was that the dielectric loss tangents of both polyimides are remarkably low at deep cryogenic temperatures, typically 100$\times$ smaller than corresponding room temperature values. This enables fairly long-distance transmission of microwave signals without excessive attenuation and permits usefully high rf power levels to be transmitted without creating excessive dielectric heating. We observed loss tangents as low as 2.2$\times$10$^{-5}$ at 20 mK. Our fabrication techniques could be extended to more complex structures such as multiconductor, multi-layer stripline or rectangular coax, and integrated attenuators and thermalization structures. △ Less

Submitted 14 June, 2016; originally announced June 2016.

Comments: 22 pages, 10 figures (included)

Journal ref: Supercond. Sci. Technol. 29, 084007 (2016)

On-Chip Microwave Quantum Hall Circulator

Authors: A. C. Mahoney, J. I. Colless, S. J. Pauka, J. M. Hornibrook, J. D. Watson, G. C. Gardner, M. J. Manfra, A. C. Doherty, D. J. Reilly

Abstract: Circulators are non-reciprocal circuit elements integral to technologies including radar systems, microwave communication transceivers, and the readout of quantum information devices. Their non-reciprocity arises from the interference of microwaves over the centimetre-scale of the signal wavelength in the presence of bulky magnetic media that break time-reversal symmetry. Here we realize a complet… ▽ More Circulators are non-reciprocal circuit elements integral to technologies including radar systems, microwave communication transceivers, and the readout of quantum information devices. Their non-reciprocity arises from the interference of microwaves over the centimetre-scale of the signal wavelength in the presence of bulky magnetic media that break time-reversal symmetry. Here we realize a completely passive on-chip microwave circulator with size one-thousandth the wavelength by exploiting the chiral, slow-light response of a 2-dimensional electron gas (2DEG) in the quantum Hall regime. For an integrated GaAs device with 330 um diameter and 1 GHz centre frequency, a non-reciprocity of 25 dB is observed over a 50 MHz bandwidth. Furthermore, the direction of circulation can be selected dynamically by varying the magnetic field, an aspect that may enable reconfigurable passive routing of microwave signals on-chip. △ Less

Submitted 4 January, 2016; originally announced January 2016.

Journal ref: Phys. Rev. X 7, 011007 (2017)

Cryogenic Control Architecture for Large-Scale Quantum Computing

Authors: J. M. Hornibrook, J. I. Colless, I. D. Conway Lamb, S. J. Pauka, H. Lu, A. C. Gossard, J. D. Watson, G. C. Gardner, S. Fallahi, M. J. Manfra, D. J. Reilly

Abstract: Solid-state qubits have recently advanced to the level that enables them, in-principle, to be scaled-up into fault-tolerant quantum computers. As these physical qubits continue to advance, meeting the challenge of realising a quantum machine will also require the engineering of new classical hardware and control architectures with complexity far beyond the systems used in today's few-qubit experim… ▽ More Solid-state qubits have recently advanced to the level that enables them, in-principle, to be scaled-up into fault-tolerant quantum computers. As these physical qubits continue to advance, meeting the challenge of realising a quantum machine will also require the engineering of new classical hardware and control architectures with complexity far beyond the systems used in today's few-qubit experiments. Here, we report a micro-architecture for controlling and reading out qubits during the execution of a quantum algorithm such as an error correcting code. We demonstrate the basic principles of this architecture in a configuration that distributes components of the control system across different temperature stages of a dilution refrigerator, as determined by the available cooling power. The combined setup includes a cryogenic field-programmable gate array (FPGA) controlling a switching matrix at 20 millikelvin which, in turn, manipulates a semiconductor qubit. △ Less

Submitted 8 September, 2014; originally announced September 2014.

Comments: 8 pages, 6 figures

Journal ref: Phys. Rev. Applied 3, 024010, (2015)

Frequency Multiplexing for Readout of Spin Qubits

Authors: J. M. Hornibrook, J. I. Colless, A. C. Mahoney, X. G. Croot, S. Blanvillain, H. Lu, A. C. Gossard, D. J. Reilly

Abstract: We demonstrate a low loss, chip-level frequency multiplexing scheme for readout of scaled-up spin qubit devices. By integrating separate bias tees and resonator circuits on-chip for each readout channel, we realize dispersive gate-sensing in combination with charge detection based on two rf quantum point contacts (rf-QPCs). We apply this approach to perform multiplexed readout of a double quantum… ▽ More We demonstrate a low loss, chip-level frequency multiplexing scheme for readout of scaled-up spin qubit devices. By integrating separate bias tees and resonator circuits on-chip for each readout channel, we realize dispersive gate-sensing in combination with charge detection based on two rf quantum point contacts (rf-QPCs). We apply this approach to perform multiplexed readout of a double quantum dot in the few-electron regime, and further demonstrate operation of a 10-channel multiplexing device. Limitations for scaling spin qubit readout to large numbers of multiplexed channels is discussed. △ Less

Submitted 18 December, 2013; originally announced December 2013.

Journal ref: Applied Physics Letters 104, 103108, (2014)

Dispersive Readout of a Few-Electron Double Quantum Dot with Fast rf Gate-Sensors

Authors: J. I. Colless, A. C. Mahoney, J. M. Hornibrook, A. C. Doherty, D. J. Reilly, H. Lu, A. C. Gossard

Abstract: We report the dispersive charge-state readout of a double quantum dot in the few-electron regime using the in situ gate electrodes as sensitive detectors. We benchmark this gate-sensing technique against the well established quantum point contact (QPC) charge detector and find comparable performance with a bandwidth of 10 MHz and an equivalent charge sensitivity of 6.3 x 10-3 e/ \sqrt Hz. Dispersi… ▽ More We report the dispersive charge-state readout of a double quantum dot in the few-electron regime using the in situ gate electrodes as sensitive detectors. We benchmark this gate-sensing technique against the well established quantum point contact (QPC) charge detector and find comparable performance with a bandwidth of 10 MHz and an equivalent charge sensitivity of 6.3 x 10-3 e/ \sqrt Hz. Dispersive gate-sensing alleviates the burden of separate charge detectors for quantum dot systems and promises to enable readout of qubits in scaled-up arrays. △ Less

Submitted 17 October, 2012; originally announced October 2012.

Journal ref: Physical Review Letters 110 (4), 046805, (2013)

Superconducting Resonators with Parasitic Electromagnetic Environments

Authors: J. M. Hornibrook, E. E. Mitchell, D. J. Reilly

Abstract: Parasitic electromagnetic fields are shown to strongly suppress the quality (Q)-factor of superconducting coplanar waveguide resonators via non-local dissipation in the macroscopic environment. Numerical simulation and low temperature measurements demonstrate how this parasitic loss can be reduced, establishing a Lorentzian lineshape in the resonator frequency response and yielding a loaded Q-fact… ▽ More Parasitic electromagnetic fields are shown to strongly suppress the quality (Q)-factor of superconducting coplanar waveguide resonators via non-local dissipation in the macroscopic environment. Numerical simulation and low temperature measurements demonstrate how this parasitic loss can be reduced, establishing a Lorentzian lineshape in the resonator frequency response and yielding a loaded Q-factor of 2.4 x 10^5 for niobium devices on sapphire substrates. In addition, we report the dependence of the Q and resonance frequency shift Delta f_0 with input power and temperature in the limit where loss from two-level systems in the dielectric dominate. △ Less

Submitted 20 March, 2012; originally announced March 2012.