-
Precise Control of Process Parameters for >23% Efficiency Perovskite Solar Cells in Ambient Air Using an Automated Device Acceleration Platform
Authors:
Jiyun Zhang,
Anastasia Barabash,
Tian Du,
Jianchang Wu,
Vincent M. Le Corre,
Yicheng Zhao,
Shudi Qiu,
Kaicheng Zhang,
Frederik Schmitt,
Zijian Peng,
**g**g Tian,
Chaohui Li,
Chao Liu,
Thomas Heumueller,
Larry Lüer,
Jens A. Hauch,
Christoph J. Brabec
Abstract:
Achieving high-performance perovskite photovoltaics, especially in ambient air relies heavily on optimizing process parameters. However, traditional manual methods often struggle to effectively control the key variables. This inherent challenge requires a paradigm shift toward automated platforms capable of precise and reproducible experiments. Herein, we use a fully automated device acceleration…
▽ More
Achieving high-performance perovskite photovoltaics, especially in ambient air relies heavily on optimizing process parameters. However, traditional manual methods often struggle to effectively control the key variables. This inherent challenge requires a paradigm shift toward automated platforms capable of precise and reproducible experiments. Herein, we use a fully automated device acceleration platform (DAP) to optimize the process parameters for preparing full perovskite devices using a two-step method in ambient air. Eight process parameters that have the potential to significantly influence device performance are systematically optimized. Specifically, we delve into the impact of the dispense speed of organic ammonium halide, a parameter that is difficult to control manually, on both perovskite film and device performance. Through the targeted design of experiments, we reveal that the dispense speed significantly affects device performance primarily by adjusting the residual PbI2 content in the films. We find that moderate dispense speeds, e.g., 50 μl/s, contribute to top-performance devices. Conversely, too fast or too slow speeds result in devices with relatively poorer performance and lower reproducibility. The optimized parameter set enables us to establish a Standard Operation Procedure (SOP) for additive-free perovskite processing under ambient conditions, which yield devices with efficiencies surpassing 23%, satisfactory reproducibility, and state-of-the-art photo-thermal stability. This research underscores the importance of understanding the causality of process parameters in enhancing perovskite photovoltaic performance. Furthermore, our study highlights the pivotal role of automated platforms in discovering innovative workflows and accelerating the development of high-performing perovskite photovoltaic technologies.
△ Less
Submitted 29 March, 2024;
originally announced April 2024.
-
Autonomous Optimization of an Organic Solar Cell in a 4-dimensional Parameter Space
Authors:
Tobias Osterrieder,
Frederik Schmitt,
Larry Luer,
Jerrit Wagner,
Thomas Heumüller,
Jens Hauch,
Christoph Brabec
Abstract:
Optimizing solution-processed organic solar cells is a complex task due to the vast parameter space in organic photovoltaics (OPV). Classical Edisonian or one-variable-at-a-time (OVAT) optimization approaches are laborious, time-consuming, and may not find the optimal parameter set in multidimensional design spaces. To tackle this problem, we demonstrate here for the first time artificial intellig…
▽ More
Optimizing solution-processed organic solar cells is a complex task due to the vast parameter space in organic photovoltaics (OPV). Classical Edisonian or one-variable-at-a-time (OVAT) optimization approaches are laborious, time-consuming, and may not find the optimal parameter set in multidimensional design spaces. To tackle this problem, we demonstrate here for the first time artificial intelligence (AI) guided closed-loop autonomous optimization for fully functional organic solar cells. We empower our LineOne, an automated materials and device acceleration platform with a Bayesian Optimizer (BO) to enable autonomous operation for solving complex optimization problems without human interference. The system is able to fabricate and characterize complete OPV devices and navigate efficiently through the design space spanned by composition and processing parameters. In addition, a Gaussian Progress Regression (GPR) based early prediction model is employed to predict the efficiency of the cells from cheap proxy measurements, in our case, thin film absorption spectra, which are analyzed using a spectral model based on physical properties to generate microstructure features as input for the GPR. We demonstrate our generic and complete autonomous approach by optimizing composition and processing conditions of a ternary OPV system (PM6:Y12:PC70BM) in a four-dimensional parameter space. We identify the best parameter set for our system and obtain a precise objective function over the whole parameter space with a minimal number of samples. We demonstrate autonomous optimization of a complex opto-electronic device within 40 samples only, whereas an Edisonian approach would have required about 1000 samples. This raises an important discussion on the necessity of autonomous platforms to accelerate Material science.
△ Less
Submitted 14 May, 2023;
originally announced May 2023.
-
Power-law density of states in organic solar cells revealed by the open-circuit voltage dependence of the ideality factor
Authors:
Maria Saladina,
Christopher Wöpke,
Clemens Göhler,
Ivan Ramirez,
Olga Gerdes,
Chao Liu,
Ning Li,
Thomas Heumüller,
Christoph J. Brabec,
Karsten Walzer,
Martin Pfeiffer,
Carsten Deibel
Abstract:
The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage ($V_\mathrm{oc}$) dependence of the ideality factor in organic solar cells. By performing Suns-$V_\mathrm{oc}$ meas…
▽ More
The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage ($V_\mathrm{oc}$) dependence of the ideality factor in organic solar cells. By performing Suns-$V_\mathrm{oc}$ measurements, we find that gaussian and exponential distributions describe the DOS only at a given quasi-Fermi level splitting. The DOS width increases linearly with the DOS depth, revealing the power-law DOS in these materials.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Traps and transport resistance: the next frontier for stable state-of-the-art non-fullerene acceptor solar cells
Authors:
Christopher Wöpke,
Clemens Göhler,
Maria Saladina,
Xiaoyan Du,
Li Nian,
Christopher Greve,
Chenhui Zhu,
Kaila M. Yallum,
Yvonne J. Hofstetter,
David Becker-Koch,
Ning Li,
Thomas Heumüller,
Ilya Milekhin,
Dietrich R. T. Zahn,
Christoph J. Brabec,
Natalie Banerji,
Yana Vaynzof,
Eva M. Herzig,
Roderick C. I. MacKenzie,
Carsten Deibel
Abstract:
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduct…
▽ More
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduction, the other one is induced thermally and marked by severe losses of open-circuit voltage and fill factor. We focus our investigation on the thermally accelerated degradation. Our findings show that bulk material properties and interfaces remain remarkably stable, however, aging-induced defect state formation in the active layer remains the primary cause of thermal degradation. The increased trap density leads to higher non-radiative recombination, which limits open-circuit voltage and lowers charge carrier mobility in the photoactive layer. Furthermore, we find the trap-induced transport resistance to be the major reason for the drop in fill factor. Our results suggest that device lifetimes could be significantly increased by marginally suppressing trap formation, leading to a bright future for OSC.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Light Intensity Modulated Impedance Spectroscopy (LIMIS) in All-Solid-State Solar Cells at Open Circuit
Authors:
Osbel Almora,
Yicheng Zhao,
Xiaoyan Du,
Thomas Heumueller,
Gebhard J. Matt,
Germà Garcia-Belmonte,
Christoph J. Brabec
Abstract:
Potentiostatic impedance spectroscopy (IS) is a well stablished characterization technique for elucidating the electric resistivity and capacitive features of materials and devices. In the case of solar cells, by applying a small voltage perturbation the current signal is recorded and the recombination processes and defect distributions are among the typical outcomes in IS studies. In this work a…
▽ More
Potentiostatic impedance spectroscopy (IS) is a well stablished characterization technique for elucidating the electric resistivity and capacitive features of materials and devices. In the case of solar cells, by applying a small voltage perturbation the current signal is recorded and the recombination processes and defect distributions are among the typical outcomes in IS studies. In this work a photo-impedance approach, named light intensity modulated impedance spectroscopy (LIMIS), is first tested in all-solid-state photovoltaic cells by recording the individual photocurrent (IMPS) and photovoltage (IMVS) responsivity signals due to a small light perturbation at open-circuit (OC), and combining them: LIMIS=IMVS/IMPS. The experimental LIMIS spectra from silicon, organic, and perovskite solar cells are presented and compared with IS. An analysis of the equivalent circuit numerical models for total resistive and capacitive features is discussed. Our theoretical findings show a correction to the lifetimes evaluations by obtaining the total differential resistances and capacitances combining IS and LIMIS measurements. This correction addresses the discrepancies among different techniques, as shown with transient photovoltage. The experimental differences between IS and LIMIS (i) proves the unviability of the superposition principle, (ii) suggest a bias-dependent photo-current correction to the empirical Shockley equation of the steady-state current at different illumination intensities around OC and (iii) are proposed as a potential figure of merit for characterizing performance and stability of solar cells. In addition, new features are reported for the low-frequency capacitance of perovskite solar cells, measured by IS and LIMIS.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.