-
Low-Temperature Synthesis of Stable CaZn$_2$P$_2$ Zintl Phosphide Thin Films as Candidate Top Absorbers
Authors:
Shaham Quadir,
Zhenkun Yuan,
Guillermo Esparza,
Sita Dugu,
John Mangum,
Andrew Pike,
Muhammad Rubaiat Hasan,
Gideon Kassa,
Xiaoxin Wang,
Yagmur Coban,
Jifeng Liu,
Kirill Kovnir,
David P. Fenning,
Obadiah G. Reid,
Andriy Zakutayev,
Geoffroy Hautier,
Sage R. Bauers
Abstract:
The development of tandem photovoltaics and photoelectrochemical solar cells requires new absorber materials with band gaps in the range of ~1.5-2.3 eV, for use in the top cell paired with a narrower-gap bottom cell. An outstanding challenge is finding materials with suitable optoelectronic and defect properties, good operational stability, and synthesis conditions that preserve underlying device…
▽ More
The development of tandem photovoltaics and photoelectrochemical solar cells requires new absorber materials with band gaps in the range of ~1.5-2.3 eV, for use in the top cell paired with a narrower-gap bottom cell. An outstanding challenge is finding materials with suitable optoelectronic and defect properties, good operational stability, and synthesis conditions that preserve underlying device layers. This study demonstrates the Zintl phosphide compound CaZn$_2$P$_2$ as a compelling candidate semiconductor for these applications. We prepare phase pure, 500 nm-thick CaZn$_2$P$_2$ thin films using a scalable reactive sputter deposition process at growth temperatures as low as 100 °C, which is desirable for device integration. UV-vis spectroscopy shows that CaZn$_2$P$_2$ films exhibit an optical absorptivity of ~10$^4$ cm$^-$$^1$ at ~1.95 eV direct band gap. Room-temperature photoluminescence (PL) measurements show near-band-edge optical emission, and time-resolved microwave conductivity (TRMC) measurements indicate a photoexcited carrier lifetime of ~30 ns. CaZn$_2$P$_2$ is highly stable in both ambient conditions and moisture, as evidenced by PL and TRMC measurements. Experimental data are supported by first-principles calculations, which indicate the absence of low-formation-energy, deep intrinsic defects. Overall, our study should motivate future work integrating this potential top cell absorber material into tandem solar cells.
△ Less
Submitted 21 June, 2024;
originally announced June 2024.
-
Observation of Extraordinary Vibration Scatterings Induced by Strong Anharmonicity in Lead-Free Halide Double Perovskites
Authors:
Guang Wang,
Jiongzhi Zheng,
Jie Xue,
Yixin Xu,
Qiye Zheng,
Geoffroy Hautier,
Haipeng Lu,
Yanguang Zhou
Abstract:
Lead-free halide double perovskites provide a promising solution for the long-standing issues of lead-containing halide perovskites, i.e., the toxicity of Pb and the low stability under ambient conditions and high-intensity illumination. Their light-to-electricity or thermal-to-electricity conversion is strongly determined by the dynamics of the corresponding lattice vibrations. Here, we present t…
▽ More
Lead-free halide double perovskites provide a promising solution for the long-standing issues of lead-containing halide perovskites, i.e., the toxicity of Pb and the low stability under ambient conditions and high-intensity illumination. Their light-to-electricity or thermal-to-electricity conversion is strongly determined by the dynamics of the corresponding lattice vibrations. Here, we present the measurement of lattice dynamics in a prototypical lead-free halide double perovskite, i.e., Cs2NaInCl6. Our quantitative measurements and first-principles calculations show that the scatterings among lattice vibrations at room temperature are at the timescale of ~ 1 ps, which stems from the extraordinarily strong anharmonicity in Cs2NaInCl6. We further quantitatively characterize the degree of anharmonicity of all the ions in the single Cs2NaInCl6 crystal, and demonstrate that this strong anharmonicity is synergistically contributed by the bond hierarchy, the tilting of the NaCl6 and InCl6 octahedral units, and the rattling of Cs+ ions. Consequently, the crystalline Cs2NaInCl6 possesses an ultralow thermal conductivity of ~0.43 W/mK at room temperature, and a weak temperature dependence of T-0.41. Our findings here uncovered the underlying mechanisms behind the dynamics of lattice vibrations in double perovskites, which could largely benefit the design of optoelectronics and thermoelectrics based on halide double perovskites.
△ Less
Submitted 13 June, 2024;
originally announced June 2024.
-
Ineffectiveness of Formamidine in Suppressing Ultralow Thermal Conductivity in Cubic Hybrid Perovskite FAPbI3
Authors:
Jiongzhi Zheng,
Zheng Chang,
Changpeng Lin,
Chongjia Lin,
Yanguang Zhou,
Baoling Huang,
Ruiqiang Guo,
Geoffroy Hautier
Abstract:
Fundamentally understanding the lattice dynamics and microscopic mechanisms of thermal transport in cubic hybrid organic-inorganic perovskites remains elusive, primarily due to their strong anharmonicity and frequent phase transitions. In this work, we comprehensively investigate the thermal transport behavior in cubic hybrid perovskite FAPbI3, integrating first principles-based anharmonic lattice…
▽ More
Fundamentally understanding the lattice dynamics and microscopic mechanisms of thermal transport in cubic hybrid organic-inorganic perovskites remains elusive, primarily due to their strong anharmonicity and frequent phase transitions. In this work, we comprehensively investigate the thermal transport behavior in cubic hybrid perovskite FAPbI3, integrating first principles-based anharmonic lattice dynamics with a linearized Wigner transport formula. The Temperature Dependent Effective Potential (TDEP) technique allows us to stabilize the negative soft modes, primarily dominated by organic cations, at finite temperatures in cubic FAPbI3. We then predict an ultra-low thermal conductivity of ~0.63 Wm^(-1) K^(-1) in cubic FAPbI3 at 300 K, with a temperature dependence of T^(-0.740), suggesting a good crystalline nature of phonon transport. Notably, the ultra-low thermal conductivity in cubic FAPbI3 is primarily attributed to the [PbI3]1- units, challenging the conventional focus on organic FA+ cations. This shift in focus is due to the presence of Pb(s)-I(p) anti-bonding sates within the [PbI3]1- units. Furthermore, thermal transport in cubic FAPbI3 is predominantly governed by the particle-like phonon propagation channel across the entire temperature range of 300-500 K, a result of diminished suppression of low-frequency phonons by FA+ cations and large inter-branch spacings. Finally, our findings underscore that the anharmonic force constants are highly temperature-sensitive, leading to underestimations of thermal conductivity when relying on 0-K anharmonic force constants. Our study not only elucidates the microscopic mechanisms of thermal transport in cubic FAPbI3 but also provides a crucial framework for the discovery, design, and understanding of hybrid organic-inorganic compounds with ultra-low thermal conductivity.
△ Less
Submitted 7 June, 2024; v1 submitted 3 June, 2024;
originally announced June 2024.
-
Assessing carrier mobility, dopability, and defect tolerance in the chalcogenide perovskite BaZrS$_3$
Authors:
Zhenkun Yuan,
Diana Dahliah,
Romain Claes,
Andrew Pike,
David P. Fenning,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
The chalcogenide perovskite BaZrS$_3$ has attracted much attention as a promising solar absorber for thin-film photovoltaics. Here, we use first-principles calculations to evaluate its carrier transport and defect properties. We find that BaZrS$_3$ has a phonon-limited electron mobility of 37 cm$^2$/Vs comparable to that in halide perovskites but lower hole mobility of 11 cm$^2$/Vs. The defect com…
▽ More
The chalcogenide perovskite BaZrS$_3$ has attracted much attention as a promising solar absorber for thin-film photovoltaics. Here, we use first-principles calculations to evaluate its carrier transport and defect properties. We find that BaZrS$_3$ has a phonon-limited electron mobility of 37 cm$^2$/Vs comparable to that in halide perovskites but lower hole mobility of 11 cm$^2$/Vs. The defect computations indicate that BaZrS$_3$ is intrinsically n-type due to shallow sulfur vacancies, but that strong compensation by sulfur vacancies will prevent attempts to make it p-type. We also establish that BaZrS$_3$ is a defect-tolerant absorber with few low formation energy, deep intrinsic defects. Among the deep defects, sulfur interstitials are the strongest nonradiative recombination centers which in sulfur-rich conditions would limit the carrier lifetime to 10 ns. Our work highlights the material's intrinsic limitations in carrier mobility and suggests suppressing the formation of sulfur interstitials to reach long carrier lifetime.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
Discovery of T center-like quantum defects in silicon
Authors:
Yihuang Xiong,
Jiongzhi Zheng,
Shay McBride,
Xueyue Zhang,
Sinéad M. Griffin,
Geoffroy Hautier
Abstract:
Quantum technologies would benefit from the development of high performance quantum defects acting as single-photon emitters or spin-photon interface. Finding such a quantum defect in silicon is especially appealing in view of its favorable spin bath and high processability. While some color centers in silicon have been emerging in quantum applications, there is still a need to search and develop…
▽ More
Quantum technologies would benefit from the development of high performance quantum defects acting as single-photon emitters or spin-photon interface. Finding such a quantum defect in silicon is especially appealing in view of its favorable spin bath and high processability. While some color centers in silicon have been emerging in quantum applications, there is still a need to search and develop new high performance quantum emitters. Searching a high-throughput computational database of more than 22,000 charged complex defects in silicon, we identify a series of defects formed by a group III element combined with carbon ((A-C)$\rm _{Si}$ with A=B,Al,Ga,In,Tl) and substituting on a silicon site. These defects are analogous structurally, electronically and chemically to the well-known T center in silicon ((C-C-H)$\rm_{Si}$) and their optical properties are mainly driven by an unpaired electron in a carbon $p$ orbital. They all emit in the telecom and some of these color centers show improved properties compared to the T center in terms of computed radiative lifetime or emission efficiency. We also show that the synthesis of hydrogenated T center-like defects followed by a dehydrogenation annealing step could be an efficient way of synthesis. All the T center-like defects show a higher symmetry than the T center making them easier to align with magnetic fields. Our work motivates further studies on the synthesis and control of this new family of quantum defects, and also demonstrates the use of high-throughput computational screening to detect new complex quantum defects.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
First-principles study of defects and do** limits in CaO
Authors:
Zhenkun Yuan,
Geoffroy Hautier
Abstract:
Calcium oxide (CaO) is a promising host for quantum defects because of its ultrawide band gap and potential for long spin coherence times. Using hybrid functional calculations, we investigate the intrinsic point defects and how they limit Fermi-level positions and do** in CaO. Our results reveal calcium and oxygen vacancies to be the most common intrinsic defects, acting as compensating acceptor…
▽ More
Calcium oxide (CaO) is a promising host for quantum defects because of its ultrawide band gap and potential for long spin coherence times. Using hybrid functional calculations, we investigate the intrinsic point defects and how they limit Fermi-level positions and do** in CaO. Our results reveal calcium and oxygen vacancies to be the most common intrinsic defects, acting as compensating acceptors and donors, respectively. Oxygen interstitials are also prevailing under O-rich conditions and act as compensating donors. Due to compensation by these defects, O-poor conditions are required to dope CaO n-type, while O-rich conditions are required for p-type do**. We find that, at room temperature, intrinsic CaO can only achieve Fermi-level positions between 1.76 eV above the valence-band maximum (VBM) and 1.73 eV below the conduction-band minimum (CBM). If suitable shallow dopants can be found, the allowed range of Fermi levels would increase to between VBM+0.53 eV and CBM-0.27 eV and is set by the compensating intrinsic defects. Additionally, we study hydrogen impurities, and show that hydrogen will limit p-type do** but can also act as shallow donor when substituting oxygen ($\mathrm{H}_\mathrm{O}$ defects).
△ Less
Submitted 31 March, 2024;
originally announced April 2024.
-
A first principles study of the Stark shift effect on the zero-phonon line of the NV center in diamond
Authors:
Louis Alaerts,
Yihuang Xiong,
Sinéad Griffin,
Geoffroy Hautier
Abstract:
Point defects in semiconductors are attractive candidates for quantum information science applications owing to their ability to act as spin-photon interface or single-photon emitters. However, the coupling between the change of dipole moment upon electronic excitation and stray electric fields in the vicinity of the defect, an effect known as Stark shift, can cause significant spectral diffusion…
▽ More
Point defects in semiconductors are attractive candidates for quantum information science applications owing to their ability to act as spin-photon interface or single-photon emitters. However, the coupling between the change of dipole moment upon electronic excitation and stray electric fields in the vicinity of the defect, an effect known as Stark shift, can cause significant spectral diffusion in the emitted photons. In this work, using first principles computations, we revisit the methodology to compute the Stark shift of point defects up to the second order. The approach consists of applying an electric field on a defect in a slab and monitoring the changes in the computed zero-phonon line (i.e., difference in energy between the ground and excited state) obtained from constraining the orbital occupations (constrained-DFT). We study the Stark shift of the negatively charged nitrogen-vacancy (NV) center in diamond using this slab approach. We discuss and compare two approaches to ensure a negatively charged defect in a slab and we show that converged values of the Stark shift measured by the change in dipole moment between the ground and excited states ($Δμ$) can be obtained. We obtain a Stark shift of $Δμ$=2.68D using the semi-local GGA-PBE functional and of $Δμ$=2.23D using the HSE hybrid-functional. The results of the slab computations are significantly different than those obtained with Modern Theory of Polarization ($Δμ$=4.34D for GGA-PBE) indicating a potential issue with the combination of constrained-DFT and Modern Theory of Polarization, at least in certain codes.
△ Less
Submitted 21 March, 2024; v1 submitted 12 March, 2024;
originally announced March 2024.
-
The Defects Genome of 2D Janus Transition Metal Dichalcogenides
Authors:
Mohammed Sayyad,
Jan Kopaczek,
Carmem M. Gilardoni,
Weiru Chen,
Yihuang Xiong,
Shize Yang,
Kenji Watanabe,
Takashi Taniguchi,
Robert Kudrawiec,
Geoffroy Hautier,
Mete Atature,
Sefaattin Tongay
Abstract:
Two-dimensional (2D) Janus Transition Metal Dichalcogenides (TMDs) have attracted much interest due to their exciting quantum properties arising from their unique two-faced structure, broken-mirror symmetry, and consequent colossal polarisation field within the monolayer. While efforts have been made to achieve high-quality Janus monolayers, the existing methods rely on highly energetic processes…
▽ More
Two-dimensional (2D) Janus Transition Metal Dichalcogenides (TMDs) have attracted much interest due to their exciting quantum properties arising from their unique two-faced structure, broken-mirror symmetry, and consequent colossal polarisation field within the monolayer. While efforts have been made to achieve high-quality Janus monolayers, the existing methods rely on highly energetic processes that introduce unwanted grain-boundary and point defects with still unexplored effects on the material's structural and excitonic properties Through High-resolution scanning transmission electron microscopy (HRSTEM), density functional theory (DFT), and optical spectroscopy measurements; this work introduces the most encountered and energetically stable point defects. It establishes their impact on the material's optical properties. HRSTEM studies show that the most energetically stable point defects are single (Vs and Vse) and double chalcogen vacancy (Vs-Vse), interstitial defects (Mi), and metal impurities (MW) and establish their structural characteristics. DFT further establishes their formation energies and related localized bands within the forbidden band. Cryogenic excitonic studies on h-BN-encapsulated Janus monolayers offer a clear correlation between these structural defects and observed emission features, which closely align with the results of the theory. The overall results introduce the defect genome of Janus TMDs as an essential guideline for assessing their structural quality and device properties.
△ Less
Submitted 10 March, 2024;
originally announced March 2024.
-
A First-Principles Tool to Discover New Pyrometallurgical Refining Options
Authors:
Michiel J. Van Setten,
Annelies Malfliet,
Geoffroy Hautier,
Bart Blanpain
Abstract:
We demonstrate the opportunities of first-principles density functional theory (DFT) calculations for the development of new metallurgical refining processes. As such, a methodology based on DFT calculations is developed to discover new pyrometallurgical refining processes that use the addition of a third element to remove an impurity from a molten host material. As a case study, this methodology…
▽ More
We demonstrate the opportunities of first-principles density functional theory (DFT) calculations for the development of new metallurgical refining processes. As such, a methodology based on DFT calculations is developed to discover new pyrometallurgical refining processes that use the addition of a third element to remove an impurity from a molten host material. As a case study, this methodology is applied to the refining of lead. The proposed method predicts the existing refining routes as well as alternative processes. The most interesting candidate for the removal of arsenic from lead is experimentally verified, which confirms the suitability of the remover element. The method is therefore considered as a useful approach to speed up the discovery of new pyrometallurgical refining processes, as it provides an ordered set of interesting candidate remover elements
△ Less
Submitted 4 March, 2024;
originally announced March 2024.
-
From design to device: challenges and opportunities in computational discovery of p-type transparent conductors
Authors:
Rachel Woods-Robinson,
Monica Morales-Masis,
Geoffroy Hautier,
Andrea Crovetto
Abstract:
A high-performance p-type transparent conductor (TC) does not yet exist, but could lead to advances in a wide range of optoelectronic applications and enable new architectures for, e.g., next-generation photovoltaic (PV) devices. High-throughput computational material screenings have been a promising approach to filter databases and identify new p-type TC candidates, and some of these predictions…
▽ More
A high-performance p-type transparent conductor (TC) does not yet exist, but could lead to advances in a wide range of optoelectronic applications and enable new architectures for, e.g., next-generation photovoltaic (PV) devices. High-throughput computational material screenings have been a promising approach to filter databases and identify new p-type TC candidates, and some of these predictions have been experimentally validated. However, most of these predicted candidates do not have experimentally-achieved properties on par with n-type TCs used in solar cells, and therefore have not yet been used in commercial devices. Thus, there is still a significant divide between transforming predictions into results that are actually achievable in the lab, and an even greater lag in scaling predicted materials into functional devices. In this perspective, we outline some of the major disconnects in this materials discovery process -- from scaling computational predictions into synthesizable crystals and thin films in the laboratory, to scaling lab-grown films into real-world solar devices -- and share insights to inform future strategies for TC discovery and design.
△ Less
Submitted 1 July, 2024; v1 submitted 29 February, 2024;
originally announced February 2024.
-
Compressive-Sensing-Enhanced First-Principles Calculation of Photoluminescence Spectra in Color Centers: A Comparison between Theory and Experiment for the G Center in Silicon
Authors:
Jiongzhi Zheng,
Lukasz Komza,
Yihuang Xiong,
Natalya Sheremetyeva,
Changpeng Lin,
Sinéad M. Griffin,
Alp Sipahigil,
Geoffroy Hautier
Abstract:
Photoluminescence (PL) spectra are a versatile tool for exploring the electronic and optical properties of quantum defect systems. In this work, we investigate the PL spectra of the G center in silicon by combining first-principles computations with a machine-learned compressive-sensing technique and experiment. We show that the compressive-sensing technique provides a speed up of approximately 20…
▽ More
Photoluminescence (PL) spectra are a versatile tool for exploring the electronic and optical properties of quantum defect systems. In this work, we investigate the PL spectra of the G center in silicon by combining first-principles computations with a machine-learned compressive-sensing technique and experiment. We show that the compressive-sensing technique provides a speed up of approximately 20 times compared with the finite-displacement method with similar numerical accuracy. We compare theory and experiment and show good agreement for the historically proposed configuration B of the G center. In particular, we attribute the experimentally observed E-line of the G center to a local vibration mode mainly involving two substitutional C atoms and one interstitial Si atom. Our theoretical results also well reproduce and explain the experimental E-line energy shifts originating from the carbon isotopic effect. In addition, our results demonstrate that some highly anharmonic modes that are apparent in computed spectra could be absent experimentally because of their short lifetime. Our work not only provides a deeper understanding of the G-center defect but also paves the way to accelerate the calculation of PL spectra for color centers.
△ Less
Submitted 16 February, 2024; v1 submitted 12 February, 2024;
originally announced February 2024.
-
FeMnNiAlCr High Entropy Alloys with High-Efficiency Surface Oxide Solar Absorbers for Concentrating Solar Power Systems
Authors:
Xiaoxue Gao,
Edwin Jiang,
Andrew Pike,
Eldred Lee,
Margaret Wu,
Huan Wang,
Sheppard Somers,
Weiyang Li,
Geoffroy Hautier,
Ian Baker,
Jifeng Liu
Abstract:
High entropy alloys (HEAs) have attracted substantial interest in recent years. Thus far, most investigations have focused on their applications as structural materials rather than functional materials. In this paper, we show that FeMnNiAlCr HEAs can potentially be applied as both a structural and functional material for high-efficiency concentrated solar thermal power (CSP) systems working at >70…
▽ More
High entropy alloys (HEAs) have attracted substantial interest in recent years. Thus far, most investigations have focused on their applications as structural materials rather than functional materials. In this paper, we show that FeMnNiAlCr HEAs can potentially be applied as both a structural and functional material for high-efficiency concentrated solar thermal power (CSP) systems working at >700 degrees C. The HEA itself would be used in high-temperature tubing to carry working fluids, while its surface oxide would act as a high-efficiency solar thermal absorber. These HEAs have demonstrated yield strengths 2-3x greater than that of stainless steel at 700 degrees C and a creep lifetime >800 h at 700 degrees C under a typical CSP tubing mechanical load of 35 MPa. Their Mn-rich surface oxides maintain a high optical-to-thermal conversion efficiency of ~87% under 1000x solar concentration for 20 simulated day-night thermal cycles between 750 degrees C and environmental temperature. These HEAs have also sustained immersion in unpurified bromide molten salts for 14 days at 750°C with <2% weight loss, in contrast to 70% weight loss from a 316 stainless steel reference. The simultaneous achievement of promising mechanical, optical, and thermochemical properties in this FeMnNiAlCr system opens the door to new applications of HEAs in solar energy harvesting.
△ Less
Submitted 22 December, 2023;
originally announced December 2023.
-
Native point defects in HgCdTe infrared detector material: Identifying deep centers from first principles
Authors:
Wei Chen,
Gian-Marco Rignanese,
Jifeng Liu,
Geoffroy Hautier
Abstract:
We investigate the native point defects in the long-wavelength infrared (LWIR) detector material Hg$_{0.75}$Cd$_{0.25}$Te using a dielectric-dependent hybrid density functional combined with spin-orbit coupling. Characterizing these point defects is essential as they are responsible for intrinsic do** and nonradiative recombination centers in the detector material. The dielectric-dependent hybri…
▽ More
We investigate the native point defects in the long-wavelength infrared (LWIR) detector material Hg$_{0.75}$Cd$_{0.25}$Te using a dielectric-dependent hybrid density functional combined with spin-orbit coupling. Characterizing these point defects is essential as they are responsible for intrinsic do** and nonradiative recombination centers in the detector material. The dielectric-dependent hybrid functional allows for an accurate description of the band gap ($E_g$) for Hg$_{1-x}$Cd$_{x}$Te (MCT) over the entire compositional range, a level of accuracy challenging with standard hybrid functionals. Our comprehensive examination of the native point defects confirms that cation vacancies $V_\text{Hg(Cd)}$ are the primary sources of $p$-type conductivity in the LWIR material given their low defect formation energies and the presence of a shallow acceptor level ($-$/0) near the valence-band maximum (VBM). In addition to the shallow acceptor level, the cation vacancies exhibit a deep charge transition level (2$-$/$-$) situated near the midgap, characteristic of nonradiative recombination centers. Our results indicate that Hg interstitial could also be a deep center in the LWIR MCT through a metastable configuration under the Hg-rich growth conditions. While an isolated Te antisite does not show deep levels, the formation of $V_\text{Hg}$-Te$_\text{Hg}$ defect complex introduces a deep acceptor level within the band gap.
△ Less
Submitted 13 March, 2024; v1 submitted 9 November, 2023;
originally announced November 2023.
-
Discovery of the Zintl-phosphide BaCd$_{2}$P$_{2}$ as a long carrier lifetime and stable solar absorber
Authors:
Zhenkun Yuan,
Diana Dahliah,
Muhammad Rubaiat Hasan,
Gideon Kassa,
Andrew Pike,
Shaham Quadir,
Romain Claes,
Cierra Chandler,
Yihuang Xiong,
Victoria Kyveryga,
Philip Yox,
Gian-Marco Rignanese,
Ismaila Dabo,
Andriy Zakutayev,
David P. Fenning,
Obadiah G. Reid,
Sage Bauers,
Jifeng Liu,
Kirill Kovnir,
Geoffroy Hautier
Abstract:
Thin-film photovoltaics offers a path to significantly decarbonize our energy production. Unfortunately, current materials commercialized or under development as thin-film solar cell absorbers are far from optimal as they show either low power conversion efficiency or issues with earth-abundance and stability. Entirely new and disruptive materials platforms are rarely discovered as the search for…
▽ More
Thin-film photovoltaics offers a path to significantly decarbonize our energy production. Unfortunately, current materials commercialized or under development as thin-film solar cell absorbers are far from optimal as they show either low power conversion efficiency or issues with earth-abundance and stability. Entirely new and disruptive materials platforms are rarely discovered as the search for new solar absorbers is traditionally slow and serendipitous. Here, we use first principles high-throughput screening to accelerate this process. We identify new solar absorbers among known inorganic compounds using considerations on band gap, carrier transport, optical absorption but also on intrinsic defects which can strongly limit the carrier lifetime and ultimately the solar cell efficiency. Screening about 40,000 materials, we discover the Zintl-phosphide BaCd$_{2}$P$_{2}$ as a potential high-efficiency solar absorber. Follow-up experimental work confirms the predicted promises of BaCd$_{2}$P$_{2}$ highlighting an optimal band gap for visible absorption, bright photoluminescence, and long carrier lifetime of up to 30 ns even for unoptimized powder samples. Importantly, BaCd$_{2}$P$_{2}$ does not contain any critical elements and is highly stable in air and water. Our work opens an avenue for a new family of stable, earth-abundant, high-performance Zintl-based solar absorbers. It also demonstrates how recent advances in first principles computation can accelerate the search of photovoltaic materials by combining high-throughput screening with experiment.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
Wave-like Tunneling of Phonons Dominates Glass-like Thermal Transport in Quasi-1D Copper Halide CsCu2I3
Authors:
Jiongzhi Zheng,
Changpeng Lin,
Chongjia Lin,
Baoling Huang,
Ruiqiang Guo,
Geoffroy Hautier
Abstract:
Fundamental understanding of thermal transport in compounds with ultra-low thermal conductivity remains challenging, primarily due to the limitations of conventional lattice dynamics and heat transport models. In this study, we investigate the thermal transport in quasi-one-dimensional (1D) copper halide CsCu2I3 by employing a combination of first principles-based self-consistent phonon calculatio…
▽ More
Fundamental understanding of thermal transport in compounds with ultra-low thermal conductivity remains challenging, primarily due to the limitations of conventional lattice dynamics and heat transport models. In this study, we investigate the thermal transport in quasi-one-dimensional (1D) copper halide CsCu2I3 by employing a combination of first principles-based self-consistent phonon calculations and a dual-channel thermal transport model. Our results show that the 0-K unstable soft modes, primarily dominated by Cs and I atoms in CsCu2I3, can be an-harmonically stabilized at ~ 75 K. Furthermore, we predict an ultra-low thermal conductivity of 0.362 Wm^(-1) K^(-1) along the chain axis and 0.201 Wm^(-1) K^(-1) along cross chain direction in CsCu2I3 at 300 K. Importantly, we find that an unexpected anomalous trend of increasing cross-chain thermal conductivity with increasing temperature for CsCu2I3, following a temperature dependence of ~T 0.106, which is atypical for a single crystal and classified as an abnormal glass-like behavior. The peculiar temperature-dependent behavior of thermal conductivity is elucidated by the dominant wave-like tunnelling of phonons in thermal transport of CsCu2I3 along cross-chain direction. In contrast, particle-like phonon propagation primarily contributes to the chain-axis thermal conductivity across the entire temperature range of 300-700 K. The sharp difference in the dominant thermal transport channels between the two crystallographic directions can be attributed to the unique chain-like quasi-1D structure of CsCu2I3. Our study not only illustrates the microscopic mechanisms of thermal transport in CsCu2I3 but also paves the way for searching for and designing materials with ultra-low thermal conductivity.
△ Less
Submitted 9 November, 2023; v1 submitted 20 October, 2023;
originally announced October 2023.
-
A substitutional quantum defect in WS$_2$ discovered by high-throughput computational screening and fabricated by site-selective STM manipulation
Authors:
John C. Thomas,
Wei Chen,
Yihuang Xiong,
Bradford A. Barker,
Junze Zhou,
Weiru Chen,
Antonio Rossi,
Nolan Kelly,
Zhuohang Yu,
Da Zhou,
Shalini Kumari,
Edward S. Barnard,
Joshua A. Robinson,
Mauricio Terrones,
Adam Schwartzberg,
D. Frank Ogletree,
Eli Rotenberg,
Marcus M. Noack,
Sinéad Griffin,
Archana Raja,
David A. Strubbe,
Gian-Marco Rignanese,
Alexander Weber-Bargioni,
Geoffroy Hautier
Abstract:
Point defects in two-dimensional materials are of key interest for quantum information science. However, the space of possible defects is immense, making the identification of high-performance quantum defects extremely challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS$_2$, which present localized levels in…
▽ More
Point defects in two-dimensional materials are of key interest for quantum information science. However, the space of possible defects is immense, making the identification of high-performance quantum defects extremely challenging. Here, we perform high-throughput (HT) first-principles computational screening to search for promising quantum defects within WS$_2$, which present localized levels in the band gap that can lead to bright optical transitions in the visible or telecom regime. Our computed database spans more than 700 charged defects formed through substitution on the tungsten or sulfur site. We found that sulfur substitutions enable the most promising quantum defects. We computationally identify the neutral cobalt substitution to sulfur (Co$_{\rm S}^{0}$) as very promising and fabricate it with scanning tunneling microscopy (STM). The Co$_{\rm S}^{0}$ electronic structure measured by STM agrees with first principles and showcases an attractive new quantum defect. Our work shows how HT computational screening and novel defect synthesis routes can be combined to design new quantum defects.
△ Less
Submitted 14 September, 2023;
originally announced September 2023.
-
First-principles study of intrinsic and hydrogen point defects in the earth-abundant photovoltaic absorber Zn3P2
Authors:
Zhenkun Yuan,
Yihuang Xiong,
Geoffroy Hautier
Abstract:
Zinc phosphide (Zn3P2) has had a long history of scientific interest largely because of its potential for earth-abundant photovoltaics. To realize high-efficiency Zn3P2 solar cells, it is critical to understand and control point defects in this material. Using hybrid functional calculations, we assess the energetics and electronic behavior of intrinsic point defects and hydrogen impurities in Zn3P…
▽ More
Zinc phosphide (Zn3P2) has had a long history of scientific interest largely because of its potential for earth-abundant photovoltaics. To realize high-efficiency Zn3P2 solar cells, it is critical to understand and control point defects in this material. Using hybrid functional calculations, we assess the energetics and electronic behavior of intrinsic point defects and hydrogen impurities in Zn3P2. All intrinsic defects are found to act as compensating centers in p-type Zn3P2 and have deep levels in the band gap, except for zinc vacancies which are shallow acceptors and can act as a source of do**. Our work highlights that zinc vacancies rather than phosphorus interstitials are likely to be the main source of p-type do** in as-grown Zn3P2. We also show that Zn-poor and P-rich growth conditions, which are usually used for enhancing p-type conductivity of Zn3P2, will facilitate the formation of certain deep-level defects (P_Zn and P_i) which might be detrimental to solar cell efficiency. For hydrogen impurities, which are frequently present in the growth environment of Zn3P2, we study interstitial hydrogen and hydrogen complexes with vacancies. The results suggest small but beneficial effects of hydrogen on the electrical properties of Zn3P2.
△ Less
Submitted 23 June, 2023;
originally announced June 2023.
-
Designing transparent conductors using forbidden optical transitions
Authors:
Rachel Woods-Robinson,
Yihuang Xiong,
Jimmy-Xuan Shen,
Nicholas Winner,
Matthew K. Horton,
Mark Asta,
Alex M. Ganose,
Geoffroy Hautier,
Kristin A. Persson
Abstract:
Many semiconductors present weak or forbidden transitions at their fundamental band gaps, inducing a widened region of transparency. This occurs in high-performing n-type transparent conductors (TCs) such as Sn-doped In2O3 (ITO), however thus far the presence of forbidden transitions has been neglected in searches for new p-type TCs. To address this, we first compute high-throughput absorption spe…
▽ More
Many semiconductors present weak or forbidden transitions at their fundamental band gaps, inducing a widened region of transparency. This occurs in high-performing n-type transparent conductors (TCs) such as Sn-doped In2O3 (ITO), however thus far the presence of forbidden transitions has been neglected in searches for new p-type TCs. To address this, we first compute high-throughput absorption spectra across ~18,000 semiconductors, showing that over half exhibit forbidden or weak optical transitions at their band edges. Next, we demonstrate that compounds with highly localized band edge states are more likely to present forbidden transitions. Lastly, we search this set for p-type and n-type TCs with forbidden or weak transitions. Defect calculations yield unexplored TC candidates such as ambipolar BeSiP2, Zr2SN2 and KSe, p-type BAs, Au2S, and AuCl, and n-type Ba2InGaO5, GaSbO4, and KSbO3, among others. We share our data set via the MPContribs platform, and we recommend that future screenings for optical properties use metrics representative of absorption features rather than band gap alone.
△ Less
Submitted 9 April, 2023; v1 submitted 29 March, 2023;
originally announced March 2023.
-
High-throughput identification of spin-photon interfaces in silicon
Authors:
Yihuang Xiong,
Céline Bourgois,
Natalya Sheremetyeva,
Wei Chen,
Diana Dahliah,
Hanbin Song,
Sinéad M. Griffin,
Alp Sipahigil,
Geoffroy Hautier
Abstract:
Color centers in host semiconductors are prime candidates for spin-photon interfaces that would enable numerous quantum applications. The discovery of an optimal spin-photon interface in silicon would move quantum information technologies towards a mature semiconductor technology. However, the space of possible charged defects in a host is very large, making the identification of promising quantum…
▽ More
Color centers in host semiconductors are prime candidates for spin-photon interfaces that would enable numerous quantum applications. The discovery of an optimal spin-photon interface in silicon would move quantum information technologies towards a mature semiconductor technology. However, the space of possible charged defects in a host is very large, making the identification of promising quantum defects from experiments only extremely challenging. Here, we use high-throughput first principles computational screening to identify spin-photon interfaces among more than 1000 substitutional and interstitial charged defects in silicon. We evaluate the most promising defects by considering their optical properties, spin multiplicity, and formation energies. The use of a single-shot hybrid functional approach is critical in enabling the screening of a large number of defects with a reasonable accuracy in the calculated optical and electronic properties. We identify three new promising spin-photon interface as potential bright emitters in the telecom band: $\rm Ti_{i}^{+}$, $\rm Fe_{i}^{0}$, and $\rm Ru_{i}^{0}$. These candidates are excited through defect-bound excitons, stressing the importance of considering these type of defects in silicon if operations in the telecom band is targeted. Our work paves the way to further large scale computational screening for quantum defects in silicon and other hosts.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Midgap state requirements for optically active quantum defects
Authors:
Yihuang Xiong,
Milena Mathew,
Sinéad M. Griffin,
Alp Sipahigil,
Geoffroy Hautier
Abstract:
Optically active quantum defects play an important role in quantum sensing, computing, and communication. The electronic structure and the single-particle energy levels of these quantum defects in the semiconducting host have been used to understand their opto-electronic properties. Optical excitations that are central for their initialization and readout are linked to transitions between occupied…
▽ More
Optically active quantum defects play an important role in quantum sensing, computing, and communication. The electronic structure and the single-particle energy levels of these quantum defects in the semiconducting host have been used to understand their opto-electronic properties. Optical excitations that are central for their initialization and readout are linked to transitions between occupied and unoccupied single-particle states. It is commonly assumed that only quantum defects introducing levels well within the band gap and far from the band edges are of interest for quantum technologies as they mimic an isolated atom embedded in the host. In this perspective, we contradict this common assumption and show that optically active defects with energy levels close to the band edges can display similar properties. We highlight quantum defects that are excited through transitions to or from a band-like level (bound exciton), such as the T center and Se$\rm _{Si}^+$ in silicon. We also present how defects such as the silicon divacancy in diamond can involve transitions between localized levels that are above the conduction band or below the valence band. Loosening the commonly assumed requirement on the electronic structure of quantum defects offers opportunities in quantum defects design and discovery, especially in smaller band gap hosts such as silicon. We discuss the challenges in terms of operating temperature for photoluminescence or radiative lifetime in this regime. We also highlight how these alternative type of defects bring their own needs in terms of theoretical developments and fundamental understanding. This perspective clarifies the electronic structure requirement for quantum defects and will facilitate the identification and design of new color centers for quantum applications especially driven by first principles computations.
△ Less
Submitted 21 February, 2023;
originally announced February 2023.
-
Unravelling Ultralow Thermal Conductivity in Double Perovskite Cs2AgBiBr6: Dominant Wave-like Phonon Tunnelling, Strong Quartic Anharmonicity and Lattice Instability
Authors:
Jiongzhi Zheng,
Changpeng Lin,
Chongjia Lin,
Geoffroy Hautier,
Ruiqiang Guo,
Baoling Huang
Abstract:
In this work, we investigate the microscopic mechanisms of anharmonic lattice dynamics and thermal transport in lead-free halide double perovskite Cs2AgBiBr6 from first principles. We combine self-consistent phonon calculations with bubble diagram correction and a unified theory of lattice thermal transport that considers both the particle-like phonon propagation and wave-like tunnelling of phonon…
▽ More
In this work, we investigate the microscopic mechanisms of anharmonic lattice dynamics and thermal transport in lead-free halide double perovskite Cs2AgBiBr6 from first principles. We combine self-consistent phonon calculations with bubble diagram correction and a unified theory of lattice thermal transport that considers both the particle-like phonon propagation and wave-like tunnelling of phonons. An ultra-low thermal conductivity at room temperature (~0.21 Wm-1K-1) is predicted with weak temperature dependence(~T-0.45), in sharp contrast to the conventional ~T-1 dependence. Particularly, the vibrational properties of Cs2AgBiBr6 are featured by strong anharmonicity and wave-like tunnelling of phonons. Anharmonic phonon renormalization from both the cubic and quartic anharmonicities are found essential in precisely predicting the phase transition temperature in Cs2AgBiBr6 while the negative phonon energy shifts induced by cubic anharmonicity has a significant influence on particle-like phonon propagation. Further, the contribution of the wave-like tunnelling to the total thermal conductivity surpasses that of the particle-like propagation above around 340 K, indicating the breakdown of the phonon gas picture conventionally used in the Peierls-Boltzmann Transport Equation. Importantly, further including four-phonon scatterings is required in achieving the dominance of wave-like tunnelling, as compared to the dominant particle-like propagation channel when considering only three-phonon scatterings. Our work highlights the importance of lattice anharmonicity and wave-like tunnelling of phonons in the thermal transport in lead-free halide double perovskites.
△ Less
Submitted 12 December, 2023; v1 submitted 28 January, 2023;
originally announced January 2023.
-
Prediction of topological phases in metastable ferromagnetic MPX$_3$ monolayers
Authors:
Natalya Sheremetyeva,
Ilyoun Na,
Anay Saraf,
Sinéad M. Griffin,
Geoffroy Hautier
Abstract:
Density functional theory calculations are carried out to study the electronic and topological properties of $M$P$X_3$ ($M$ = Mn, Fe, Co, Ni, and $X$ = S, Se) monolayers in the ferromagnetic (FM) metastable magnetic state. We find that FM MnPSe$_3$ monolayers host topological semimetal signatures that are gapped out when spin-orbit coupling (SOC) is included. These findings are supported by explic…
▽ More
Density functional theory calculations are carried out to study the electronic and topological properties of $M$P$X_3$ ($M$ = Mn, Fe, Co, Ni, and $X$ = S, Se) monolayers in the ferromagnetic (FM) metastable magnetic state. We find that FM MnPSe$_3$ monolayers host topological semimetal signatures that are gapped out when spin-orbit coupling (SOC) is included. These findings are supported by explicit calculations of the Berry curvature and the Chern number. The choice of the Hubbard-$U$ parameter to describe the $d$-electrons is thoroughly discussed, as well as the influence of using a hybrid-functional approach. The presence of band inversions and the associated topological features are found to be formalism-dependent. Nevertheless, routes to achieve the topological phase via the application of external biaxial strain are demonstrated. Within the hybrid-functional picture, topological band structures are recovered under a pressure of 15% (17 GPa). The present work provides a potential avenue for uncovering new topological phases in metastable ferromagnetic phases.
△ Less
Submitted 7 December, 2022; v1 submitted 5 December, 2022;
originally announced December 2022.
-
Indistinguishable photons from an artificial atom in silicon photonics
Authors:
Lukasz Komza,
Polnop Samutpraphoot,
Mutasem Odeh,
Yu-Lung Tang,
Milena Mathew,
Jiu Chang,
Hanbin Song,
Myung-Ki Kim,
Yihuang Xiong,
Geoffroy Hautier,
Alp Sipahigil
Abstract:
Silicon is the ideal material for building electronic and photonic circuits at scale. Spin qubits and integrated photonic quantum technologies in silicon offer a promising path to scaling by leveraging advanced semiconductor manufacturing and integration capabilities. However, the lack of deterministic quantum light sources, two-photon gates, and spin-photon interfaces in silicon poses a major cha…
▽ More
Silicon is the ideal material for building electronic and photonic circuits at scale. Spin qubits and integrated photonic quantum technologies in silicon offer a promising path to scaling by leveraging advanced semiconductor manufacturing and integration capabilities. However, the lack of deterministic quantum light sources, two-photon gates, and spin-photon interfaces in silicon poses a major challenge to scalability. In this work, we show a new type of indistinguishable photon source in silicon photonics based on an artificial atom. We show that a G center in a silicon waveguide can generate high-purity telecom-band single photons. We perform high-resolution spectroscopy and time-delayed two-photon interference to demonstrate the indistinguishability of single photons emitted from a G center in a silicon waveguide. Our results show that artificial atoms in silicon photonics can source highly coherent single photons suitable for photonic quantum networks and processors.
△ Less
Submitted 16 November, 2022;
originally announced November 2022.
-
A map of single-phase high-entropy alloys
Authors:
Wei Chen,
Antoine Hilhorst,
Georges Bokas,
Stéphane Gorsse,
Pascal J. Jacques,
Geoffroy Hautier
Abstract:
High-entropy alloys have shown much interest and unusual materials properties. The stability of equimolar single-phase solid solution of five or more elements is likely to be rare and identifying the existence of such alloys has been very challenging because of the very large space of possible combinations. Herein, based on high-throughput density-functional theory calculations, we construct a che…
▽ More
High-entropy alloys have shown much interest and unusual materials properties. The stability of equimolar single-phase solid solution of five or more elements is likely to be rare and identifying the existence of such alloys has been very challenging because of the very large space of possible combinations. Herein, based on high-throughput density-functional theory calculations, we construct a chemical map of single-phase equimolar high entropy alloys by investigating over 650000 equimolar quinary alloys through a binary regular solid-solution model. We identify more than 30000 potential single-phase equimolar alloys (5% of the possible combinations) forming mainly in body-centered cubic structures. We unveil the chemistries that are likely to form high-entropy alloys, and identify the complex interplay among mixing enthalpy, intermetallics formation, and melting point that drives the formation of these solid solutions. We demonstrate the power of our method by predicting the existence of two new high entropy alloys, i.e. the body-centered cubic AlCoMnNiV and the face-centered cubic CoFeMnNiZn, which are successfully synthesized.
△ Less
Submitted 20 April, 2023; v1 submitted 11 September, 2022;
originally announced September 2022.
-
Nonunique fraction of Fock exchange for defects in two-dimensional materials
Authors:
Wei Chen,
Sinéad M. Griffin,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
By investigating the vacancy and substitutional defects in monolayer WS$_2$ with hybrid functionals, we find that there is no unique amount of Fock exchange that concurrently satisfies the generalized Koopmans' condition and reproduces the band gap and band-edge positions. Fixing the mixing parameter of Fock exchange based upon the band gap can lead to qualitatively incorrect defect physics in two…
▽ More
By investigating the vacancy and substitutional defects in monolayer WS$_2$ with hybrid functionals, we find that there is no unique amount of Fock exchange that concurrently satisfies the generalized Koopmans' condition and reproduces the band gap and band-edge positions. Fixing the mixing parameter of Fock exchange based upon the band gap can lead to qualitatively incorrect defect physics in two-dimensional materials. Instead, excellent agreement is achieved with experiment and many-body perturbation theory within $GW$ approximation once the mixing parameters are tuned individually for the defects and the band edges. We show the departure from a unique optimized mixing parameter is inherent to two-dimensional systems as the band edges experience a reduced screening whilst the localized defects are subject to bulklike screening.
△ Less
Submitted 9 October, 2022; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Assessing the quality of relaxation-time approximations with fully-automated computations of phonon-limited mobilities
Authors:
Romain Claes,
Guillaume Brunin,
Matteo Giantomassi,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
The mobility of carriers, as limited by their scattering with phonons, can now routinely be obtained from first-principles electron-phonon coupling calculations. However, so far, most computations have relied on some form of simplification of the linearized Boltzmann transport equation based on either the self-energy, the momentum- or constant relaxation time approximations. Here, we develop a hig…
▽ More
The mobility of carriers, as limited by their scattering with phonons, can now routinely be obtained from first-principles electron-phonon coupling calculations. However, so far, most computations have relied on some form of simplification of the linearized Boltzmann transport equation based on either the self-energy, the momentum- or constant relaxation time approximations. Here, we develop a high-throughput infrastructure and an automatic workflow and we compute 69 phonon-limited mobilities in semiconductors. We compare the results resorting to the approximations with the exact iterative solution. We conclude that the approximate values may deviate significantly from the exact ones and are thus not reliable. Given the minimal computational overhead, our work encourages to rely on this exact iterative solution and warns on the possible inaccuracy of earlier results reported using relaxation time approximations.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
First principles study of the T-center in Silicon
Authors:
Diana Dhaliah,
Yihuang Xiong,
Alp Sipahigil,
Sinéad M. Griffin,
Geoffroy Hautier
Abstract:
The T-center in silicon is a well-known carbon-based color center that has been recently considered for quantum technology applications. Using first principles computations, we show that the excited state is formed by a defect-bound exciton made of a localized defect state occupied by an electron to which a hole is bound. The localized state is of strong carbon \textit{p} character and reminiscent…
▽ More
The T-center in silicon is a well-known carbon-based color center that has been recently considered for quantum technology applications. Using first principles computations, we show that the excited state is formed by a defect-bound exciton made of a localized defect state occupied by an electron to which a hole is bound. The localized state is of strong carbon \textit{p} character and reminiscent of the localization of the unpaired electron in the ethyl radical molecule. The radiative lifetime for the defect-bound exciton is calculated to be on the order of $μ$s, much longer than other quantum defects such as the NV center in diamond and in agreement with experiments. The longer lifetime is associated with the small transition dipole moment as a result of the very different nature of the localized and delocalized states forming the defect-bound exciton. Finally, we use first principles calculations to assess the stability of the T-center. We find the T-center to be stable against decomposition into simpler defects when kee** the stoichiometry fixed. However, we identify that the T-center is easily prone to (de)hydrogenation and so requires very precise annealing conditions (temperature and atmosphere) to be efficiently formed.
△ Less
Submitted 30 March, 2022; v1 submitted 8 February, 2022;
originally announced February 2022.
-
Giant thermoelectric figure of merit in multivalley high-complexity-factor LaSO
Authors:
Roberta Farris,
Francesco Ricci,
Giulio Casu,
Diana Dahliah,
Geoffroy Hautier,
Gian-Marco Rignanese,
Vincenzo Fiorentini
Abstract:
We report a giant thermoelectric figure of merit $ZT$ (up to 6 at 1100 K) in $n$-doped lanthanum oxysulphate LaSO. Thermoelectric coefficients are computed from ab initio bands within Bloch-Boltzmann theory in an energy-, chemical potential- and temperature-dependent relaxation time approximation. The lattice thermal conductivity is estimated from a model employing the ab initio phonon and Grüneis…
▽ More
We report a giant thermoelectric figure of merit $ZT$ (up to 6 at 1100 K) in $n$-doped lanthanum oxysulphate LaSO. Thermoelectric coefficients are computed from ab initio bands within Bloch-Boltzmann theory in an energy-, chemical potential- and temperature-dependent relaxation time approximation. The lattice thermal conductivity is estimated from a model employing the ab initio phonon and Grüneisen-parameter spectrum. The main source of the large $ZT$ is the significant power factor which correlates with a large band complexity factor. We also suggest a possible $n$-type dopant for the material based on ab initio calculations.
△ Less
Submitted 27 November, 2021;
originally announced November 2021.
-
OPTIMADE, an API for exchanging materials data
Authors:
Casper W. Andersen,
Rickard Armiento,
Evgeny Blokhin,
Gareth J. Conduit,
Shyam Dwaraknath,
Matthew L. Evans,
Ádám Fekete,
Abhijith Gopakumar,
Saulius Gražulis,
Andrius Merkys,
Fawzi Mohamed,
Corey Oses,
Giovanni Pizzi,
Gian-Marco Rignanese,
Markus Scheidgen,
Leopold Talirz,
Cormac Toher,
Donald Winston,
Rossella Aversa,
Kamal Choudhary,
Pauline Colinet,
Stefano Curtarolo,
Davide Di Stefano,
Claudia Draxl,
Suleyman Er
, et al. (31 additional authors not shown)
Abstract:
The Open Databases Integration for Materials Design (OPTIMADE) consortium has designed a universal application programming interface (API) to make materials databases accessible and interoperable. We outline the first stable release of the specification, v1.0, which is already supported by many leading databases and several software packages. We illustrate the advantages of the OPTIMADE API throug…
▽ More
The Open Databases Integration for Materials Design (OPTIMADE) consortium has designed a universal application programming interface (API) to make materials databases accessible and interoperable. We outline the first stable release of the specification, v1.0, which is already supported by many leading databases and several software packages. We illustrate the advantages of the OPTIMADE API through worked examples on each of the public materials databases that support the full API specification.
△ Less
Submitted 25 August, 2021; v1 submitted 2 March, 2021;
originally announced March 2021.
-
Visualizing Temperature-Dependent Phase Stability in High Entropy Alloys
Authors:
Daniel Evans,
Jiadong Chen,
Geoffroy Hautier,
Wenhao Sun
Abstract:
High Entropy Alloys (HEAs) contain near equimolar amounts of five or more elements and are a compelling space for materials design. Great emphasis is placed on identifying HEAs that form a homogeneous solid-solution, but the design of such HEAs is hindered by the difficulty of navigating stability relationships in high-component spaces. Traditional phase diagrams use barycentric coordinates to rep…
▽ More
High Entropy Alloys (HEAs) contain near equimolar amounts of five or more elements and are a compelling space for materials design. Great emphasis is placed on identifying HEAs that form a homogeneous solid-solution, but the design of such HEAs is hindered by the difficulty of navigating stability relationships in high-component spaces. Traditional phase diagrams use barycentric coordinates to represent composition axes, which require D = (N - 1) spatial dimensions to represent an N-component system, meaning that HEA systems with N > 4 components cannot be readily visualized. Here, we propose forgoing barycentric composition axes in favor of two energy axes: a formation-energy axis and a 'reaction energy' axis. These Inverse Hull Webs offer an information-dense 2D representation that successfully capture complex phase stability relationships in N > 4 component systems. We use our new diagrams to visualize the transition of HEA solid-solutions from high-temperature stability to metastability upon quenching, and identify important thermodynamic features that are correlated with the persistence or decomposition of metastable HEAs.
△ Less
Submitted 16 April, 2021; v1 submitted 29 November, 2020;
originally announced November 2020.
-
Ferroelectricity and multiferroicity in anti-Ruddlesden-Popper structures
Authors:
Maxime Markov,
Louis Alaerts,
Henrique P. C. Miranda,
Guido Petretto,
Wei Chen,
Janine George,
Eric Bousquet,
Philippe Ghosez,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
Combining ferroelectricity with other properties such as visible light absorption or long-range magnetic order requires the discovery of new families of ferroelectric materials. Here, through the analysis of a high-throughput database of phonon band structures, we identify a new structural family of anti-Ruddlesden-Popper phases A$_4$X$_2$O (A=Ca, Sr, Ba, Eu, X=Sb, P, As, Bi) showing ferroelectric…
▽ More
Combining ferroelectricity with other properties such as visible light absorption or long-range magnetic order requires the discovery of new families of ferroelectric materials. Here, through the analysis of a high-throughput database of phonon band structures, we identify a new structural family of anti-Ruddlesden-Popper phases A$_4$X$_2$O (A=Ca, Sr, Ba, Eu, X=Sb, P, As, Bi) showing ferroelectric and anti-ferroelectric behaviors. The discovered ferroelectrics belong to the new class of hyperferroelectrics which polarize even under open-circuit boundary conditions. The polar distortion involves the movement of O anions against apical A cations and is driven by geometric effects resulting from internal chemical strains. Within this new structural family, we show that Eu$_4$Sb$_2$O combines coupled ferromagnetic and ferroelectric order at the same atomic site, a very rare occurrence in materials physics.
△ Less
Submitted 19 November, 2020;
originally announced November 2020.
-
Structure motif centric learning framework for inorganic crystalline systems
Authors:
Huta R. Banjade,
Sandro Hauri,
Shanshan Zhang,
Francesco Ricci,
Geoffroy Hautier,
Slobodan Vucetic,
Qimin Yan
Abstract:
Incorporation of physical principles in a network-based machine learning (ML) architecture is a fundamental step toward the continued development of artificial intelligence for materials science and condensed matter physics. In this work, as inspired by the Pauling rule, we propose that structure motifs (polyhedral formed by cations and surrounding anions) in inorganic crystals can serve as a cent…
▽ More
Incorporation of physical principles in a network-based machine learning (ML) architecture is a fundamental step toward the continued development of artificial intelligence for materials science and condensed matter physics. In this work, as inspired by the Pauling rule, we propose that structure motifs (polyhedral formed by cations and surrounding anions) in inorganic crystals can serve as a central input to a machine learning framework for crystalline inorganic materials. Taking metal oxides as examples, we demonstrated that, an unsupervised learning algorithm Motif2Vec is able to convert the presence of structure motifs and their connections in a large set of crystalline compounds into unique vector representations. The connections among complex materials can be largely determined by the presence of different structure motifs and their clustering information are identified by our Motif2Vec algorithm. To demonstrate the novel use of structure motif information, we show that a motif-centric learning framework can be effectively created by combining motif information with the recently developed atom-based graph neural networks to form an atom-motif dual graph network (AMDNet). Taking advantage of node and edge information on both atomic and motif level, the AMDNet is more accurate than an atom graph network in predicting electronic structure related material properties of metal oxides such as band gaps. The work illustrates the route toward fundamental design of graph neural network learning architecture for complex material properties by incorporating beyond-atom physical principles.
△ Less
Submitted 8 July, 2020;
originally announced July 2020.
-
Combining phonon accuracy with high transferability in Gaussian approximation potential models
Authors:
Janine George,
Geoffroy Hautier,
Albert P. Bartók,
Gábor Csányi,
Volker L. Deringer
Abstract:
Machine learning driven interatomic potentials, including Gaussian approximation potential (GAP) models, are emerging tools for atomistic simulations. Here, we address the methodological question of how one can fit GAP models that accurately predict vibrational properties in specific regions of configuration space, whilst retaining flexibility and transferability to others. We use an adaptive regu…
▽ More
Machine learning driven interatomic potentials, including Gaussian approximation potential (GAP) models, are emerging tools for atomistic simulations. Here, we address the methodological question of how one can fit GAP models that accurately predict vibrational properties in specific regions of configuration space, whilst retaining flexibility and transferability to others. We use an adaptive regularization of the GAP fit that scales with the absolute force magnitude on any given atom, thereby exploring the Bayesian interpretation of GAP regularization as an "expected error", and its impact on the prediction of physical properties for a material of interest. The approach enables excellent predictions of phonon modes (to within 0.1-0.2 THz) for structurally diverse silicon allotropes, and it can be coupled with existing fitting databases for high transferability. These findings and workflows are expected to be useful for GAP-driven materials modeling more generally.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
MODNet -- accurate and interpretable property predictions for limited materials datasets by feature selection and joint-learning
Authors:
Pierre-Paul De Breuck,
Geoffroy Hautier,
Gian-Marco Rignanese
Abstract:
In order to make accurate predictions of material properties, current machine-learning approaches generally require large amounts of data, which are often not available in practice. In this work, an all-round framework is presented which relies on a feedforward neural network, the selection of physically-meaningful features and, when applicable, joint-learning. Next to being faster in terms of tra…
▽ More
In order to make accurate predictions of material properties, current machine-learning approaches generally require large amounts of data, which are often not available in practice. In this work, an all-round framework is presented which relies on a feedforward neural network, the selection of physically-meaningful features and, when applicable, joint-learning. Next to being faster in terms of training time, this approach is shown to outperform current graph-network models on small datasets. In particular, the vibrational entropy at 305 K of crystals is predicted with a mean absolute test error of 0.009 meV/K/atom (four times lower than previous studies). Furthermore, joint-learning reduces the test error compared to single-target learning and enables the prediction of multiple properties at once, such as temperature functions. Finally, the selection algorithm highlights the most important features and thus helps understanding the underlying physics.
△ Less
Submitted 7 July, 2021; v1 submitted 30 April, 2020;
originally announced April 2020.
-
Boron phosphide as a \emph{p}-type transparent conductor: optical absorption and transport through electron-phonon coupling
Authors:
Viet-Anh Ha,
Bora Karasulu,
Ryo Maezono,
Guillaume Brunin,
Joel Basile Varley,
Gian-Marco Rignanese,
Bartomeu Monserrat,
Geoffroy Hautier
Abstract:
Boron phosphide has recently been identified as a potential high hole mobility transparent conducting material. This promise arises from its low hole effective masses. However, BP has a relatively small 2 eV indirect band gap which will affect its transparency. In this work, we computationally study both optical absorption across the indirect gap and phonon-limited electronic transport to quantify…
▽ More
Boron phosphide has recently been identified as a potential high hole mobility transparent conducting material. This promise arises from its low hole effective masses. However, BP has a relatively small 2 eV indirect band gap which will affect its transparency. In this work, we computationally study both optical absorption across the indirect gap and phonon-limited electronic transport to quantify the potential of boron phosphide as a \emph{p}-type transparent conductor. We find that phonon-mediated indirect optical absorption is weak in the visible spectrum and that the phonon-limited hole mobility is very high (around 900 cm$^2$/Vs) at room temperature. This exceptional mobility comes from a combination of low hole effective mass and very weak scattering by polar phonon modes. We rationalize the weak scattering by the less ionic bonding in boron phosphide compared to oxides. We suggest this could be a general advantage of non-oxides for \emph{p}-type transparent conducting applications. Using our computed properties, we assess the transparent conductor figure of merit of boron phosphide and shows that it exceeds by one order of magnitude that of established \emph{p}-type transparent conductors, confirming the potential of this material.
△ Less
Submitted 11 April, 2020;
originally announced April 2020.
-
Phonon-limited electron mobility in Si, GaAs and GaP with exact treatment of dynamical quadrupoles
Authors:
Guillaume Brunin,
Henrique Pereira Coutada Miranda,
Matteo Giantomassi,
Miquel Royo,
Massimiliano Stengel,
Matthieu J. Verstraete,
Xavier Gonze,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
We describe a new approach to compute the electron-phonon self-energy and carrier mobilities in semiconductors. Our implementation does not require a localized basis set to interpolate the electron-phonon matrix elements, with the advantage that computations can be easily automated. Scattering potentials are interpolated on dense $\mathbf{q}$ meshes using Fourier transforms and ab initio models to…
▽ More
We describe a new approach to compute the electron-phonon self-energy and carrier mobilities in semiconductors. Our implementation does not require a localized basis set to interpolate the electron-phonon matrix elements, with the advantage that computations can be easily automated. Scattering potentials are interpolated on dense $\mathbf{q}$ meshes using Fourier transforms and ab initio models to describe the long-range potentials generated by dipoles and quadrupoles. To reduce significantly the computational cost, we take advantage of crystal symmetries and employ the linear tetrahedron method and double-grid integration schemes, in conjunction with filtering techniques in the Brillouin zone. We report results for the electron mobility in Si, GaAs, and GaP obtained with this new methodology.
△ Less
Submitted 21 September, 2020; v1 submitted 3 February, 2020;
originally announced February 2020.
-
Electron-Phonon Beyond Fröhlich: Dynamical Quadrupoles in Polar and Covalent Solids
Authors:
Guillaume Brunin,
Henrique Pereira Coutada Miranda,
Matteo Giantomassi,
Miquel Royo,
Massimiliano Stengel,
Matthieu J. Verstraete,
Xavier Gonze,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
We include the treatment of quadrupolar fields beyond the Fröhlich interaction in the first-principles electron-phonon vertex in semiconductors. Such quadrupolar fields induce long-range interactions that have to be taken into account for accurate physical results. We apply our formalism to Si (nonpolar), GaAs, and GaP (polar) and demonstrate that electron mobilities show large errors if dynamical…
▽ More
We include the treatment of quadrupolar fields beyond the Fröhlich interaction in the first-principles electron-phonon vertex in semiconductors. Such quadrupolar fields induce long-range interactions that have to be taken into account for accurate physical results. We apply our formalism to Si (nonpolar), GaAs, and GaP (polar) and demonstrate that electron mobilities show large errors if dynamical quadrupoles are not properly treated.
△ Less
Submitted 21 September, 2020; v1 submitted 3 February, 2020;
originally announced February 2020.
-
Sr3CrN3: a new electride with partially filled d-shells
Authors:
Padtaraporn Chanhom,
Kevin E. Fritz,
Lee Burton,
Jan Kloppenburg,
Yaroslav Filinchuk,
Anatolyi Senyshin,
Maoyu Wang,
Zhenxing Feng,
Numpon Insin,
** Suntivich,
Geoffroy Hautier
Abstract:
Electrides are ionic crystals in which the electrons prefer to occupy free space, serving as anions. Because the electrons prefer to be in the pockets, channels, or layers to the atomic orbitals around the nuclei, it has been challenging to find electrides with partially filled d-shells, since an unoccupied d-shell provides an energetically favourable location for the electrons to occupy. We recen…
▽ More
Electrides are ionic crystals in which the electrons prefer to occupy free space, serving as anions. Because the electrons prefer to be in the pockets, channels, or layers to the atomic orbitals around the nuclei, it has been challenging to find electrides with partially filled d-shells, since an unoccupied d-shell provides an energetically favourable location for the electrons to occupy. We recently predicted the existence of electrides with partially filled d-shells using high-throughput computational screening. Here, we provide an experimental support using X-ray absorption spectroscopy and X-ray and neutron diffraction to show that Sr3CrN3 is indeed an electride despite its partial d-shell configuration. Our findings indicate that Sr3CrN3 is the first known electride with a partially filled d-shell, in agreement with theory, which significantly broadens the criteria for the search for new electride materials.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
Computationally-driven, high throughput identification of CaTe and Li$_\textrm{3}$Sb as promising candidates for high mobility $p$-type transparent conducting materials
Authors:
Viet-Anh Ha,
Guodong Yu,
Francesco Ricci,
Diana Dahliah,
Michiel J. van Setten,
Matteo Giantomassi,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
High-performance $p$-type transparent conducting materials (TCMs) must exhibit a rare combination of properties including high mobility, transparency and $p$-type dopability. The development of high-mobility/conductivity $p$-type TCMs is necessary for many applications such as solar cells, or transparent electronic devices. Oxides have been traditionally considered as the most promising chemical s…
▽ More
High-performance $p$-type transparent conducting materials (TCMs) must exhibit a rare combination of properties including high mobility, transparency and $p$-type dopability. The development of high-mobility/conductivity $p$-type TCMs is necessary for many applications such as solar cells, or transparent electronic devices. Oxides have been traditionally considered as the most promising chemical space to dig out novel $p$-type TCMs. However, non-oxides might perform better than traditional $p$-type TCMs (oxides) in terms of mobility. We report on a high-throughput (HT) computational search for non-oxide $p$-type TCMs from a large dataset of more than 30,000 compounds which identified CaTe and Li$_\textrm{3}$Sb as very good candidates for high-mobility $p$-type TCMs. From our calculations, both compounds are expected to be $p$-type dopable: intrinsically for Li$_\textrm{3}$Sb while CaTe would require extrinsic do**. Using electron-phonon computations, we estimate hole mobilities at room-temperature to be about 20 and 70 cm$^2$/Vs for CaTe and Li$_\textrm{3}$Sb, respectively. The computed hole mobility for Li$_\textrm{3}$Sb is quite exceptional and comparable with the electron mobility in the best $n$-type TCMs.
△ Less
Submitted 13 November, 2018;
originally announced November 2018.
-
Are Small Polarons Always Detrimental to Transparent Conducting Oxides ?
Authors:
Guillaume Brunin,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
Transparent conducting oxides (TCOs) are essential to many technologies including solar cells and transparent electronics. The search for high performance n- or p-type TCOs has mainly focused on materials offering transport through band carriers instead of small polarons. In this work, we break this paradigm and demonstrate using well-known physical models that, in certain circumstances, TCOs exhi…
▽ More
Transparent conducting oxides (TCOs) are essential to many technologies including solar cells and transparent electronics. The search for high performance n- or p-type TCOs has mainly focused on materials offering transport through band carriers instead of small polarons. In this work, we break this paradigm and demonstrate using well-known physical models that, in certain circumstances, TCOs exhibiting transport by small polarons offer a better combination of transparency and conductivity than materials conducting through band transport. We link this surprising finding to the fundamentally different physics of optical absorption for band and polaronic carriers. Our work rationalizes the good performances of recently emerging small-polaronic Cr-based p-type TCOs such as Sr-doped LaCrO$_3$ and outlines design principles for the development of high-performance TCOs based on transport by small polarons. This opens new avenues for the discovery of high-performance TCOs especially p-type.
△ Less
Submitted 11 October, 2018;
originally announced October 2018.
-
Searching for Materials with High Refractive Index and Wide Band Gap: A First-Principles High-Throughput Study
Authors:
Francesco Naccarato,
Francesco Ricci,
** Suntivich,
Geoffroy Hautier,
Ludger Wirtz,
Gian-Marco Rignanese
Abstract:
Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive index appearing in small gap materials and vice-versa. Here, we conduct a first-principles high-throughput study on more than 4000 semiconductors (with a special fo…
▽ More
Materials combining both a high refractive index and a wide band gap are of great interest for optoelectronic and sensor applications. However, these two properties are typically described by an inverse correlation with high refractive index appearing in small gap materials and vice-versa. Here, we conduct a first-principles high-throughput study on more than 4000 semiconductors (with a special focus on oxides). Our data confirm the general inverse trend between refractive index and band gap but interesting outliers are also identified. The data are then analyzed through a simple model involving two main descriptors: the average optical gap and the effective frequency. The former can be determined directly from the electronic structure of the compounds, but the latter cannot. This calls for further analysis in order to obtain a predictive model. Nonetheless, it turns out that the negative effect of a large band gap on the refractive index can counterbalanced in two ways: (i) by limiting the difference between the direct band gap and the average optical gap which can be realized by a narrow distribution in energy of the optical transitions and (ii) by increasing the effective frequency which can be achieved through either a high number of transitions from the top of the valence band to the bottom of the conduction or a high average probability for these transitions.
Focusing on oxides, we use our data to investigate how the chemistry influences this inverse relationship and rationalize why certain classes of materials would perform better. Our findings can be used to search for new compounds in many optical applications both in the linear and non-linear regime (waveguides, optical modulators, laser, frequency converter, etc.).
△ Less
Submitted 25 March, 2019; v1 submitted 4 September, 2018;
originally announced September 2018.
-
An unlikely route to low lattice thermal conductivity: small atoms in a simple layered structure
Authors:
Wanyue Peng,
Guido Petretto,
Gian-Marco Rignanese,
Geoffroy Hautier,
Alexandra Zevalkink
Abstract:
In the design of materials with low lattice thermal conductivity, compounds with high density, low speed of sound, and complexity at either the atomic, nano- or microstructural level are preferred. The layered compound Mg$_3$Sb$_2$ defies these prevailing paradigms, exhibiting lattice thermal conductivity comparable to PbTe and Bi$_2$Te$_3$, despite its low density and simple structure. The excell…
▽ More
In the design of materials with low lattice thermal conductivity, compounds with high density, low speed of sound, and complexity at either the atomic, nano- or microstructural level are preferred. The layered compound Mg$_3$Sb$_2$ defies these prevailing paradigms, exhibiting lattice thermal conductivity comparable to PbTe and Bi$_2$Te$_3$, despite its low density and simple structure. The excellent thermoelectric performance ($zT$ $\sim$ 1.5) in $n$-type Mg$_3$Sb$_2$ has thus far been attributed to its multi-valley conduction band, while its anomalous thermal properties have been largely overlooked. To explain the origin of the low lattice thermal conductivity of Mg$_3$Sb$_2$, we have used both experimental methods and ab initio phonon calculations to investigate trends in the elasticity, thermal expansion and anharmonicity of $A$Mg$_2Pn_2$ Zintl compounds with $A$ = Mg, Ca, Yb, and $Pn$ = Sb and Bi. Phonon calculations within the quasi-harmonic approximation reveal large mode Grüneisen parameters in Mg$_3$Sb$_2$ compared with isostructural compounds, in particular in transverse acoustic modes involving shearing of adjacent anionic layers. Measurements of the elastic moduli and sound velocity as a function of temperature using resonant ultrasound spectroscopy provide a window into the softening of the acoustic branches at high temperature, confirming their exceptionally high anharmonicity. We attribute the anomalous thermal behavior of Mg$_3$Sb$_2$ to the diminutive size of Mg, which may be too small for the octahedrally-coordinated site, leading to weak, unstable interlayer Mg-Sb bonding. This suggests more broadly that soft shear modes resulting from undersized cations provide a potential route to achieving low lattice thermal conductivity low-density, earth-abundant materials.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
High-Throughput Identification of Electrides from all Known Inorganic Materials
Authors:
Lee A. Burton,
Francesco Ricci,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
In this paper, we present the results of a large-scale, high-throughput computational search for electrides among all known inorganic materials. Analyzing a database of density functional theory results on more than 60,000 compounds, we identify 69 new electride candidates. We report on all these candidates and discuss the structural and chemical factors leading to electride formation. Among these…
▽ More
In this paper, we present the results of a large-scale, high-throughput computational search for electrides among all known inorganic materials. Analyzing a database of density functional theory results on more than 60,000 compounds, we identify 69 new electride candidates. We report on all these candidates and discuss the structural and chemical factors leading to electride formation. Among these candidates, our work identifies the first partially-filled 3d transition metal containing electrides Ba3CrN3 and Sr3CrN3; an unexpected finding that contravenes conventional chemistry.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Convergence and pitfalls of density functional perturbation theory phonons calculations from a high-throughput perspective
Authors:
Guido Petretto,
Xavier Gonze,
Geoffroy Hautier,
Gian-Marco Rignanese
Abstract:
The diffusion of large databases collecting different kind of material properties from high-throughput density functional theory calculations has opened new paths in the study of materials science thanks to data mining and machine learning techniques. Phonon calculations have already been employed successfully to predict materials properties and interpret experimental data, e.g. phase stability, f…
▽ More
The diffusion of large databases collecting different kind of material properties from high-throughput density functional theory calculations has opened new paths in the study of materials science thanks to data mining and machine learning techniques. Phonon calculations have already been employed successfully to predict materials properties and interpret experimental data, e.g. phase stability, ferroelectricity and Raman spectra, so their availability for a large set of materials will further increase the analytical and predictive power at hand. Moving to a larger scale with density functional perturbation calculations, however, requires the presence of a robust framework to handle this challenging task. In light of this, we automatized the phonon calculation and applied the result to the analysis of the convergence trends for several materials. This allowed to identify and tackle some common problems emerging in this kind of simulations and to lay out the basis to obtain reliable phonon band structures from high-throughput calculations, as well as optimizing the approach to standard phonon simulations.
△ Less
Submitted 3 January, 2018; v1 submitted 16 October, 2017;
originally announced October 2017.
-
Automation methodologies and large-scale validation for $GW$, towards high-throughput $GW$ calculations
Authors:
M. J. van Setten,
M. Giantomassi,
X. Gonze,
G. -M. Rignanese,
G. Hautier
Abstract:
The search for new materials, based on computational screening, relies on methods that accurately predict, in an automatic manner, total energy, atomic-scale geometries, and other fundamental characteristics of materials. Many technologically important material properties directly stem from the electronic structure of a material, but the usual workhorse for total energies, namely density-functiona…
▽ More
The search for new materials, based on computational screening, relies on methods that accurately predict, in an automatic manner, total energy, atomic-scale geometries, and other fundamental characteristics of materials. Many technologically important material properties directly stem from the electronic structure of a material, but the usual workhorse for total energies, namely density-functional theory, is plagued by fundamental shortcomings and errors from approximate exchange-correlation functionals in its prediction of the electronic structure. At variance, the $GW$ method is currently the state-of-the-art {\em ab initio} approach for accurate electronic structure. It is mostly used to perturbatively correct density-functional theory results, but is however computationally demanding and also requires expert knowledge to give accurate results. Accordingly, it is not presently used in high-throughput screening: fully automatized algorithms for setting up the calculations and determining convergence are lacking. In this work we develop such a method and, as a first application, use it to validate the accuracy of $G_0W_0$ using the PBE starting point, and the Godby-Needs plasmon pole model ($G_0W_0^\textrm{GN}$@PBE), on a set of about 80 solids. The results of the automatic convergence study utilized provides valuable insights. Indeed, we find correlations between computational parameters that can be used to further improve the automatization of $GW$ calculations. Moreover, we find that $G_0W_0^\textrm{GN}$@PBE shows a correlation between the PBE and the $G_0W_0^\textrm{GN}$@PBE gaps that is much stronger than that between $GW$ and experimental gaps. However, the $G_0W_0^\textrm{GN}$@PBE gaps still describe the experimental gaps more accurately than a linear model based on the PBE gaps.
△ Less
Submitted 25 September, 2017; v1 submitted 21 September, 2017;
originally announced September 2017.
-
Superionic diffusion through frustrated energy landscape
Authors:
D. Di Stefano,
A. Miglio,
K. Robeyns,
Y. Filinchuk,
M. Lechartier,
A. Senyshyn,
H. Ishida,
S. Spannenberger,
D. Prutsch,
S. Lunghammer,
D. Rettenwander,
M. Wilkening,
B. Roling,
Y. Kato,
G. Hautier
Abstract:
Solid-state materials with high ionic conduction are necessary to many technologies including all-solid-state Li-ion batteries. Understanding how crystal structure dictates ionic diffusion is at the root of the development of fast ionic conductors. Here, we show that LiTi2(PS4)3 exhibits a Li-ion diffusion coefficient about an order of magnitude higher than current state-of-the-art lithium superio…
▽ More
Solid-state materials with high ionic conduction are necessary to many technologies including all-solid-state Li-ion batteries. Understanding how crystal structure dictates ionic diffusion is at the root of the development of fast ionic conductors. Here, we show that LiTi2(PS4)3 exhibits a Li-ion diffusion coefficient about an order of magnitude higher than current state-of-the-art lithium superionic conductors. We rationalize this observation by the unusual crystal structure of LiTi2(PS4)3 which offers no regular tetrahedral or octahedral sites for lithium to favorably occupy. This creates a smooth, frustrated energy landscape resembling more the energy landscapes present in liquids than in typical solids. This frustrated energy landscape leads to a high diffusion coefficient combining low activation energy with a high pre-factor.
△ Less
Submitted 24 July, 2019; v1 submitted 8 August, 2017;
originally announced August 2017.
-
PyCDT: A Python toolkit for modeling point defects in semiconductors and insulators
Authors:
Danny Broberg,
Bharat Medasani,
Nils Zimmermann,
Andrew Canning,
Maciej Haranczyk,
Mark Asta,
Geoffroy Hautier
Abstract:
Point defects have a strong impact on the performance of semiconductor and insulator materials used in technological applications, spanning microelectronics to energy conversion and storage. The nature of the dominant defect types, how they vary with processing conditions, and their impact on materials properties are central aspects that determine the performance of a material in a certain applica…
▽ More
Point defects have a strong impact on the performance of semiconductor and insulator materials used in technological applications, spanning microelectronics to energy conversion and storage. The nature of the dominant defect types, how they vary with processing conditions, and their impact on materials properties are central aspects that determine the performance of a material in a certain application. This information is, however, difficult to access directly from experimental measurements. Consequently, computational methods, based on electronic density functional theory (DFT), have found widespread use in the calculation of point-defect properties. Here we have developed the Python Charged Defect Toolkit (PyCDT) to expedite the setup and post-processing of defect calculations with widely used DFT software. PyCDT has a user-friendly command-line interface and provides a direct interface with the Materials Project database. This allows for setting up many charged defect calculations for any material of interest, as well as post-processing and applying state-of-the-art electrostatic correction terms. Our paper serves as a documentation for PyCDT, and demonstrates its use in an application to the well-studied GaAs compound semiconductor. We anticipate that the PyCDT code will be useful as a framework for undertaking readily reproducible calculations of charged point-defect properties, and that it will provide a foundation for automated, high-throughput calculations.
△ Less
Submitted 6 June, 2017; v1 submitted 22 November, 2016;
originally announced November 2016.
-
Influence of the "second gap" on the transparency-conductivity compromise in transparent conducting oxides: an ab initio study
Authors:
Viet-Anh Ha,
David Waroquiers,
Gian-Marco Rignanese,
Geoffroy Hautier
Abstract:
Transparent conducting oxides (TCOs) are essential to many technologies. These materials are doped (\emph{n}- or \emph{p}-type) oxides with a large enough band gap (ideally $>$3~eV) to ensure transparency. However, the high carrier concentration present in TCOs lead additionally to the possibility for optical transitions from the occupied conduction bands to higher states for \emph{n}-type materia…
▽ More
Transparent conducting oxides (TCOs) are essential to many technologies. These materials are doped (\emph{n}- or \emph{p}-type) oxides with a large enough band gap (ideally $>$3~eV) to ensure transparency. However, the high carrier concentration present in TCOs lead additionally to the possibility for optical transitions from the occupied conduction bands to higher states for \emph{n}-type materials and from lower states to the unoccupied valence bands for \emph{p}-type TCOs. The "second gap" formed by these transitions might limit transparency and a large second gap has been sometimes proposed as a design criteria for high performance TCOs. Here, we study the influence of this second gap on optical absorption using \emph{ab initio} computations for several well-known \emph{n}- and \emph{p}-type TCOs. Our work demonstrates that most known \emph{n}-type TCOs do not suffer from second gap absorption in the visible even at very high carrier concentrations. On the contrary, \emph{p}-type oxides show lowering of their optical transmission for high carrier concentrations due to second gap effects. We link this dissimilarity to the different chemistries involved in \emph{n}- versus typical \emph{p}-type TCOs. Quantitatively, we show that second gap effects lead to only moderate loss of transmission (even in p-type TCOs) and suggest that a wide second gap, while beneficial, should not be considered as a needed criteria for a working TCO.
△ Less
Submitted 13 March, 2016;
originally announced March 2016.
-
High-Mobility Bismuth-based Transparent P-Type Oxide from High-throughput Material Screening
Authors:
Amit Bathia,
Geoffroy Hautier,
Tan Nilgianskul,
Anna Miglio,
Gian-Marco Rignanese,
Xavier Gonze,
** Suntivich
Abstract:
Transparent oxides are essential building blocks to many technologies, ranging from components in transparent electronics, transparent conductors, to absorbers and protection layers in photovoltaics and photoelectrochemical devices. However, thus far, it has been difficult to develop p-type oxides with wide band gap and high hole mobility; current state-of-art transparent p-type oxides have hole m…
▽ More
Transparent oxides are essential building blocks to many technologies, ranging from components in transparent electronics, transparent conductors, to absorbers and protection layers in photovoltaics and photoelectrochemical devices. However, thus far, it has been difficult to develop p-type oxides with wide band gap and high hole mobility; current state-of-art transparent p-type oxides have hole mobility in the range of < 10 cm$^2$/Vs, much lower than their n-type counterparts. Using high-throughput computational screening to guide the discovery of novel oxides with wide band gap and high hole mobility, we report the computational identification and the experimental verification of a bismuth-based double-perovskite oxide that meets these requirements. Our identified candidate, Ba$_2$BiTaO$_6$, has an optical band gap larger than 4 eV and a Hall hole mobility above 30 cm$^2$/Vs. We rationalize this finding with molecular orbital intuitions; Bi$^{3+}$ with filled s-orbitals strongly overlap with the oxygen p, increasing the extent of the metal-oxygen covalency and effectively reducing the valence effective mass, while Ta$^{5+}$ forms a conduction band with low electronegativity, leading to a high band gap beyond the visible range. Our concerted theory-experiment effort points to the growing utility of a data-driven materials discovery and the combination of both informatics and chemical intuitions as a way to discover future technological materials.
△ Less
Submitted 14 December, 2014;
originally announced December 2014.
-
Low-Dimensional Transport and Large Thermoelectric Power Factors in Bulk Semiconductors by Band Engineering of Highly Directional Electronic States
Authors:
Daniel I. Bilc,
Geoffroy Hautier,
David Waroquiers,
Gian-Marco Rignanese,
Philippe Ghosez
Abstract:
Thermoelectrics are promising to address energy issues but their exploitation is still hampered by low efficiencies. So far, much improvement has been achieved by reducing the thermal conductivity but less by maximizing the power factor. The latter imposes apparently conflicting requirements on the band structure: a narrow energy distribution and a low effective mass. Quantum confinement in nanost…
▽ More
Thermoelectrics are promising to address energy issues but their exploitation is still hampered by low efficiencies. So far, much improvement has been achieved by reducing the thermal conductivity but less by maximizing the power factor. The latter imposes apparently conflicting requirements on the band structure: a narrow energy distribution and a low effective mass. Quantum confinement in nanostructures or the introduction of resonant states were suggested as possible solutions to this paradox but with limited success. Here, we propose an original approach to fulfill both requirements in bulk semiconductors. It exploits the highly-directional character of some orbitals to engineer the band-structure and produce a type of low-dimensional transport similar to that targeted in nanostructures, while retaining isotropic properties. Using first-principles calculations, the theoretical concept is demonstrated in Fe$_2$YZ Heusler compounds, yielding power factors 4-5 times larger than in classical thermoelectrics at room temperature. Our findings are totally generic and rationalize the search of alternative compounds with a similar behavior. Beyond thermoelectricity, these might be relevant also in the context of electronic, superconducting or photovoltaic applications.
△ Less
Submitted 2 April, 2015; v1 submitted 19 May, 2014;
originally announced May 2014.