-
Quarter- and half-filled quantum Hall states and their competing interactions in bilayer graphene
Authors:
Ravi Kumar,
André Haug,
Jehyun Kim,
Misha Yutushui,
Konstantin Khudiakov,
Vishal Bhardwaj,
Alexey Ilin,
Kenji Watanabe,
Takashi Taniguchi,
David F. Mross,
Yuval Ronen
Abstract:
Bilayer graphene has emerged as a key platform for studying non-Abelian fractional quantum Hall (FQH) states. Its multiple half-filled plateaus with large energy gaps combined with its tunability offer an opportunity to distill the principles that determine their topological order. Here, we report four additional plateaus at $ν=\frac{1}{2}$ for different spin and valley, revealing a systematic pat…
▽ More
Bilayer graphene has emerged as a key platform for studying non-Abelian fractional quantum Hall (FQH) states. Its multiple half-filled plateaus with large energy gaps combined with its tunability offer an opportunity to distill the principles that determine their topological order. Here, we report four additional plateaus at $ν=\frac{1}{2}$ for different spin and valley, revealing a systematic pattern of non-Abelian states according to their Levin--Halperin daughter states. Whenever a pair of $N=1$ Landau levels cross, anti-Pfaffian and Pfaffian develop at half filling of the lower and higher levels, respectively. In the $N=0$ levels, where half-filled plateaus are absent, we instead observe four unexpected incompressible quarter-filled states along with daughters. The mutual exclusion of half- and quarter-filled states indicates a robust competition between the interactions favoring either paired states of two-flux or four-flux composite fermions. Finally, we observe several FQH states that require strong interactions between composite fermions. Our combined findings herald a new generation of quantum Hall physics in graphene-based heterostructures.
△ Less
Submitted 29 May, 2024;
originally announced May 2024.
-
Aharonov-Bohm interference and the evolution of phase jumps in fractional quantum Hall Fabry-Perot interferometers based on bi-layer graphene
Authors:
Jehyun Kim,
Himanshu Dev,
Ravi Kumar,
Alexey Ilin,
André Haug,
Vishal Bhardwaj,
Changki Hong,
Kenji Watanabe,
Takashi Taniguchi,
Ady Stern,
Yuval Ronen
Abstract:
Quasi-particles in fractional quantum Hall states are collective excitations that carry fractional charge and anyonic statistics. While the fractional charge affects semi-classical characteristics such as shot noise and charging energies, the anyonic statistics is most notable in quantum interference phenomena. In this study, we utilize a versatile bilayer graphene-based Fabry-Pérot Interferometer…
▽ More
Quasi-particles in fractional quantum Hall states are collective excitations that carry fractional charge and anyonic statistics. While the fractional charge affects semi-classical characteristics such as shot noise and charging energies, the anyonic statistics is most notable in quantum interference phenomena. In this study, we utilize a versatile bilayer graphene-based Fabry-Pérot Interferometer (FPI) that facilitates the study of a broad spectrum of operating regimes, from Coulomb-dominated to Aharonov-Bohm, for both integer and fractional quantum Hall states. Focusing on the $ν$=$1 \over 3$ fractional quantum Hall state, we study the Aharonov-Bohm interference of quasi-particles when the magnetic flux through an interference loop and the charge density within the loop are independently varied. When their combined variation is such that the Landau filling remains $1 \over 3$ we observe pristine Aharonov-Bohm oscillations with a period of three flux quanta, as is expected from the interference of quasi-particles of one-third of the electron charge. When the combined variation is such that it leads to quasi-particles addition or removal from the loop, phase jumps emerge, and alter the phase evolution. Notably, across all cases, the average phase consistently increases by 2$π$ with each addition of one electron to the loop.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Excess noise in the anomalous metallic phase in amorphous indium oxide
Authors:
André Haug,
Dan Shahar
Abstract:
More than 25 years ago, unexpected metallic behavior was discovered on the superconducting side of the superconductor-to-insulator transition. To this day, the origin of this behavior is unclear. In this work, we present resistance and broadband voltage noise measurements in the kilohertz regime in amorphous indium oxide. We find that the metallic behavior gives rise to excess noise much larger th…
▽ More
More than 25 years ago, unexpected metallic behavior was discovered on the superconducting side of the superconductor-to-insulator transition. To this day, the origin of this behavior is unclear. In this work, we present resistance and broadband voltage noise measurements in the kilohertz regime in amorphous indium oxide. We find that the metallic behavior gives rise to excess noise much larger than what is expected from thermal noise with an unexpected frequency and temperature dependence whose origin remains elusive.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
Hydrogen Peroxide Formation Rates in a PEMFC Anode and Cathode: Effect of Humidity and Temperature
Authors:
Vijay A. Sethuraman,
John W. Weidner,
Andrew T. Haug,
Sathya Motupally,
Lesia V. Protsailo
Abstract:
Hydrogen peroxide (H2O2) formation rates in a proton exchange membrane (PEM) fuel cell anode and cathode were estimated as a function of humidity and temperature by studying the oxygen reduction reaction (ORR) on a rotating ring disc electrode (RRDE). Fuel cell conditions were replicated by depositing a film of Pt/Vulcan XC-72 catalyst onto the disk and by varying the temperature, dissolved O2 con…
▽ More
Hydrogen peroxide (H2O2) formation rates in a proton exchange membrane (PEM) fuel cell anode and cathode were estimated as a function of humidity and temperature by studying the oxygen reduction reaction (ORR) on a rotating ring disc electrode (RRDE). Fuel cell conditions were replicated by depositing a film of Pt/Vulcan XC-72 catalyst onto the disk and by varying the temperature, dissolved O2 concentration and the acidity levels in hydrochloric acid (HClO4). The HClO4 acidity was correlated to ionomer water activity and hence fuel cell humidity. The H2O2 formation rates showed a linear dependence on oxygen concentration and square dependence on water activity. The H2O2 selectivity in ORR was independent of oxygen concentration but increased with decrease in water activity (i.e., decreased humidity). Potential dependent activation energy for the H2O2 formation reaction was estimated from data obtained at different temperatures.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Importance of Catalyst Stability vis-à-vis Hydrogen Peroxide Formation Rates in PEM Fuel Cell Electrodes
Authors:
Vijay A. Sethuraman,
John W. Weidner,
Andrew T. Haug,
Marianne Pemberton,
Lesia V. Protsailo
Abstract:
The role of catalyst stability on the adverse effects of hydrogen peroxide (H2O2) formation rates in a proton exchange membrane fuel cell (PEMFC) is investigated for Pt, Pt binary (PtX, X = Co, Ru, Rh, V, Ni) and ternary (PtCoX, X = Ir, Rh) catalysts. The selectivity of these catalysts towards H2O2 formation in the oxygen reduction reaction (ORR) was measured on a rotating ring disc electrode. The…
▽ More
The role of catalyst stability on the adverse effects of hydrogen peroxide (H2O2) formation rates in a proton exchange membrane fuel cell (PEMFC) is investigated for Pt, Pt binary (PtX, X = Co, Ru, Rh, V, Ni) and ternary (PtCoX, X = Ir, Rh) catalysts. The selectivity of these catalysts towards H2O2 formation in the oxygen reduction reaction (ORR) was measured on a rotating ring disc electrode. These measured values were used in conjunction with local oxygen and proton concentrations to estimate local H2O2 formation rates in a PEMFC anode and cathode. The effect of H2O2 formation rates on the most active and durable of these catalysts (PtCo and PtIrCo) on Nafion membrane durability was studied using a single-sided membrane electrode assembly (MEA) with a built-in reference electrode. Fluoride ion concentration in the effluent water was used as an indicator of the membrane degradation rate. PtIrCo had the least fluorine emission rate (FER) followed by PtCo/KB and Pt/KB. Though PtCo and PtIrCo show higher selectivity for H2O2 formation than unalloyed Pt, they did not contribute to membrane degradation. This result is explained in terms of catalyst stability as measured in potential cycling tests in liquid electrolyte as well as in a functional PEM fuel cell.
△ Less
Submitted 19 August, 2013;
originally announced August 2013.
-
Measuring Oxygen, Carbon Monoxide and Hydrogen Sulfide Diffusion Coefficient and Solubility in Nafion Membranes
Authors:
Vijay A. Sethuraman,
Saahir Khan,
Jesse S. Jur,
Andrew T. Haug,
John W. Weidner
Abstract:
A Devanathan-Stachurski type diffusion cell made from a fuel cell assembly is designed to evaluate the gas transport properties of a proton exchange membrane as a function of cell temperature and gas pressure. Data obtained on this cell using the electrochemical monitoring technique (EMT) is used to estimate solubility and diffusion coefficient of oxygen (O2), carbon monoxide (CO) and hydrogen sul…
▽ More
A Devanathan-Stachurski type diffusion cell made from a fuel cell assembly is designed to evaluate the gas transport properties of a proton exchange membrane as a function of cell temperature and gas pressure. Data obtained on this cell using the electrochemical monitoring technique (EMT) is used to estimate solubility and diffusion coefficient of oxygen (O2), carbon monoxide (CO) and hydrogen sulfide (H2S) in Nafion membranes. Membrane swelling and reverse-gas diffusion due to water flux are accounted for in the parameter estimation procedure. Permeability of all three gases was found to increase with temperature. The estimated activation energies for O2, CO and H2S diffusion in Nafion 112 are 12.58, 20 and 8.85 kJ mol^-1, respectively. The estimated enthalpies of mixing for O2, CO and H2S in Nafion 112 are 5.88, 3.74 and 7.61 kJ mol^-1, respectively. An extensive comparison of transport properties estimated in this study to those reported in the literature suggests good agreement. Oxygen permeability in Nafion 117 was measured as a function of gas pressures between 1 and 3 atm. Oxygen diffusion coefficient in Nafion 117 is invariant with pressure and the solubility increases with pressure and obeys Henry's law. The estimated Henry's constant is 3.5 x 10^3 atm.
△ Less
Submitted 11 August, 2011;
originally announced August 2011.
