-
Raman Study of Layered Breathing Kagome Lattice Semiconductor Nb3Cl8
Authors:
Dylan A. Jeff,
Favian Gonzalez,
Kamal Harrison,
Yuzhou Zhao,
Tharindu Fernando,
Sabin Regmi,
Zhaoyu Liu,
Humberto R. Gutierrez,
Madhab Neupane,
Jihui Yang,
Jiun-Haw Chu,
Xiaodong Xu,
Ting Cao,
Saiful I. Khondaker
Abstract:
Niobium chloride (Nb3Cl8) is a layered 2D semiconducting material with many exotic properties including a breathing kagome lattice, a topological flat band in its band structure, and a crystal structure that undergoes a structural and magnetic phase transition at temperatures below 90 K. Despite being a remarkable material with fascinating new physics, the understanding of its phonon properties is…
▽ More
Niobium chloride (Nb3Cl8) is a layered 2D semiconducting material with many exotic properties including a breathing kagome lattice, a topological flat band in its band structure, and a crystal structure that undergoes a structural and magnetic phase transition at temperatures below 90 K. Despite being a remarkable material with fascinating new physics, the understanding of its phonon properties is at its infancy. In this study, we investigate the phonon dynamics of Nb3Cl8 in bulk and few layer flakes using polarized Raman spectroscopy and density functional theory (DFT) analysis to determine the material's vibrational modes, as well as their symmetrical representations and atomic displacements. We experimentally resolved 12 phonon modes, 5 of which are A1g modes while the remaining 7 are Eg modes, which is in strong agreement with our DFT calculation. Layer-dependent results suggest that the Raman peak positions are mostly insensitive to changes in layer thickness, while peak intensity and FWHM are affected. Raman measurements as a function of excitation wavelength (473-785 nm) show a significant increase of the peak intensities when using a 473 nm excitation source, suggesting a near resonant condition. Temperature-dependent Raman experiments carried out above and below the transition temperature did not show any change in the symmetries of the phonon modes, suggesting that the structural phase transition is likely from the high temperature P3m1 phase to the low-temperature R3m phase. Magneto-Raman measurements carried out at 140 and 2 K between -2 to 2 T show that the Raman modes are not magnetically coupled. Overall, our study presented here significantly advances the fundamental understanding of layered Nb3Cl8 material which can be further exploited for future applications.
△ Less
Submitted 25 October, 2023; v1 submitted 20 June, 2023;
originally announced June 2023.
-
Ultra-Low Temperature Li/CFx Batteries Enabled by Fast-transport and Anion-pairing Liquefied Gas Electrolytes
Authors:
Yijie Yin,
John Holoubek,
Alex Liu,
Baharak Sayahpour,
Ganesh Raghavendran,
Guorui Cai,
Bing Han,
Matthew Mayer,
Noah B. Schorr,
Timothy N. Lambert,
Katharine L. Harrison,
Weikang Li,
Zheng Chen,
Y. Shirley Meng
Abstract:
Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we repo…
▽ More
Lithium fluorinated carbon is one of the most promising chemistries for high-energy-density primary energy storage systems in applications where rechargeability is not required. Though Li/CFx demonstrates high energy density under ambient conditions, achieving such a high energy density when exposed to subzero temperatures remains a challenge, particularly under high current density. Here, we report a liquefied gas electrolyte with an anion-pair solvation structure based on dimethyl ether with a low melting point and low viscosity, leading to high ionic conductivity between a wide temperature range. Besides that, through systematic X-ray photoelectron spectroscopy integrated with transmission electron microscopy characterizations, we evaluate the interface of CFx for low-temperature performance. We conclude that the fast transport and anion-pairing solvation structure of the electrolyte bring about reduced charge transfer resistance at low temperatures, which resulted in significantly enhanced performance of Li/CFx cells. Utilizing 50 mg/cm2 loading electrodes, the Li/CFx still displayed 1530 Wh/kg at reduced temperature. This work provides insights into the electrolyte design that may overcome the operational limits of batteries in extreme environments.
△ Less
Submitted 1 September, 2022;
originally announced September 2022.
-
Galvanic Corrosion and Electric Field in Lithium Anode Passivation Films: Effects on Self-Discharge
Authors:
Kevin Leung,
Laura C. Merrill,
Katharine L. Harrison
Abstract:
Battery interfaces help govern rate capability, safety/stability, cycle life, and self-discharge, but significant gaps remain in our understanding at atomic length scales that can be exploited to improve interfacial properties. In particular, Li partially plated on copper current collectors, relevant to the anodeless, lithium metal cell which is a holy grail of high density energy battery research…
▽ More
Battery interfaces help govern rate capability, safety/stability, cycle life, and self-discharge, but significant gaps remain in our understanding at atomic length scales that can be exploited to improve interfacial properties. In particular, Li partially plated on copper current collectors, relevant to the anodeless, lithium metal cell which is a holy grail of high density energy battery research, has recently been reported to undergo galvanic corrosion and exhibit short shelf lives. We apply large scale Density Functional Theory (DFT) calculations and X-ray photoelectron spectroscopy to examine the reaction between the electrolyte and Li|Cu junctions coated with thin, uniform electrolyte interphase (SEI) passivating films at two applied voltages. These novel DFT galvanic corrosion simulations show that electrolyte degradation preferentially occurs on Li-plated regions and should lead to thicker SEI films. Our simulations reveal similarities but also fundamental differences between traditional metal localized pitting and Li-corrosion mechanisms. Furthermore, using the recently proposed, highly reactive lithium hydride (LiH) component SEI as example, we distinguish between electrochemical and chemical degradation pathways which are partially responsible for self-discharge, with the chemical pathway found to exhibit slow kinetics. We also predict that electric fields should in general exist across natural SEI components like LiH, and across artificial SEI films like LiI and LiAlO(2) often applied to improve battery cycling. Underlying and unifying these predictions is a framework of DFT voltage/overpotential definitions which we have derived from electrochemistry disciplines like structural metal corrosion studies; our analysis can only be made using the correct electronic voltage definitions.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Edge-Propagation Discharge Mechanism in CFx Batteries -- a First Principles and Experimental Study
Authors:
Kevin Leung,
Noah B. Schorr,
Matthew Mayer,
Timothy N. Lambert,
Y. Shirley Meng,
K. L. Harrison
Abstract:
Graphite fluoride (CFx) cathodes coupled with lithium anodes yield one of the highest theoretical energy densities (>860 Wh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than thermodynamic limits (>4.5 V), the discharge rate is low, and so far Li/CFx has only been used in primary batteries. Understanding the discharge mechanism at atomic le…
▽ More
Graphite fluoride (CFx) cathodes coupled with lithium anodes yield one of the highest theoretical energy densities (>860 Wh/g) among primary batteries. In practice, the observed discharge voltage (~2.5 V) is significantly lower than thermodynamic limits (>4.5 V), the discharge rate is low, and so far Li/CFx has only been used in primary batteries. Understanding the discharge mechanism at atomic length scales will improve practical CFx energy density, rate capability, and rechargeability. So far, purely experimental techniques have not identified the correct discharge mechanism or explained the discharge voltage. We apply Density Functional Theory calculations to demonstrate that a CFx-edge propagation discharge mechanism based on lithium insertion at the CF/C boundary in partially discharged CFx exhibits a voltage range of 2.5 to 2.9 V -- depending on whether solvent molecules are involved. The voltages and solvent dependence agrees with our discharge and galvanostatic intermittent titration technique measurements. The predicted discharge kinetics are consistent with CFx operations. Finally, we predict Li/CFx rechargeability under the application of high potentials, along a charging pathway different from that of discharge. Our work represents a general, quasi-kinetic framework to understand the discharge of conversion cathodes, circumventing the widely used phase diagram approach which most likely does not apply to Li/CFx because equilibrium conditions are not attained in this system.
△ Less
Submitted 2 July, 2021;
originally announced July 2021.
-
Stability of Solid Electrolyte Interphase Components on Lithium Metal and Reactive Anode Material Surfaces
Authors:
Kevin Leung,
Fernando Soto,
Kie Hankins,
Perla B. Balbuena,
Katharine L. Harrison
Abstract:
Lithium ion batteries (LIB) can feature reactive anodes that operate at low potentials, such as lithium metal or silicon, passivated by solid electrolyte interphase (SEI) films. SEI is known to evolve over time as cycling proceeds. In this modeling work, we focus on the stability of two main SEI components, lithium carbonate (Li2CO3) and lithium ethylene dicarbonate (LEDC). Both components are ele…
▽ More
Lithium ion batteries (LIB) can feature reactive anodes that operate at low potentials, such as lithium metal or silicon, passivated by solid electrolyte interphase (SEI) films. SEI is known to evolve over time as cycling proceeds. In this modeling work, we focus on the stability of two main SEI components, lithium carbonate (Li2CO3) and lithium ethylene dicarbonate (LEDC). Both components are electrochemically stable but thermodynamically unstable near the equilibrium Li+/Li(s) potential. Interfacial reactions represent one way to trigger the intrinsic thermodynamic instability. Both Li(2)CO(3) and LEDC are predicted to exhibit exothermic reactions on lithium metal surfaces, and the barriers are sufficiently low to permit reactions on battery operation time scales. LEDC also readily decomposes on high Li-content Li(x)Si surfaces. Our studies suggest that the innermost SEI layer on lithium metal surfaces should be a thin layer of Li(2)O -- the only thermodynamically and kinetically stable component (in the absence of a fluoride source). This work should also be relevant to inadvertant lithium plating during battery cycling, and SEI evolution on Li(x)Si surfaces.
△ Less
Submitted 23 May, 2016;
originally announced May 2016.
-
Information propagation for interacting particle systems
Authors:
Norbert Schuch,
Sarah K. Harrison,
Tobias J. Osborne,
Jens Eisert
Abstract:
We show that excitations of interacting quantum particles in lattice models always propagate with a finite speed of sound. Our argument is simple yet general and shows that by focusing on the physically relevant observables one can generally expect a bounded speed of information propagation. The argument applies equally to quantum spins, bosons such as in the Bose-Hubbard model, fermions, anyons,…
▽ More
We show that excitations of interacting quantum particles in lattice models always propagate with a finite speed of sound. Our argument is simple yet general and shows that by focusing on the physically relevant observables one can generally expect a bounded speed of information propagation. The argument applies equally to quantum spins, bosons such as in the Bose-Hubbard model, fermions, anyons, and general mixtures thereof, on arbitrary lattices of any dimension. It also pertains to dissipative dynamics on the lattice, and generalizes to the continuum for quantum fields. Our result can be seen as a meaningful analogue of the Lieb-Robinson bound for strongly correlated models.
△ Less
Submitted 27 January, 2011; v1 submitted 21 October, 2010;
originally announced October 2010.
