Showing 1–6 of 6 results for author: Han, S S

Direct measurement of photoinduced transient conducting state in multilayer 2H-MoTe2

Authors: XinYu Zhou, H Wang, Q M Liu, S J Zhang, S X Xu, Q Wu, R S Li, L Yue, T C Hu, J Y Yuan, S S Han, T Dong, D Wu, N L Wang

Abstract: Ultrafast light-matter interaction has emerged as a powerful tool to control and probe the macroscopic properties of functional materials, especially two-dimensional transition metal dichalcogenides which can form different structural phases with distinct physical properties. However, it is often difficult to accurately determine the transient optical constants. In this work, we developed a near-i… ▽ More Ultrafast light-matter interaction has emerged as a powerful tool to control and probe the macroscopic properties of functional materials, especially two-dimensional transition metal dichalcogenides which can form different structural phases with distinct physical properties. However, it is often difficult to accurately determine the transient optical constants. In this work, we developed a near-infrared pump - terahertz to midinfrared (12-22 THz) probe system in transmission geometry to measure the transient optical conductivity in 2H-MoTe2 layered material. By performing separate measurements on bulk and thin-film samples, we are able to overcome issues related to nonuniform substrate thickness and penetration depth mismatch and to extract the transient optical constants reliably. Our results show that photoexcitation at 690 nm induces a transient insulator-metal transition, while photoexcitation at 2 um has a much smaller effect due to the photon energy being smaller than the band gap of the material. Combining this with a single-color pump-probe measurement, we show that the transient response evolves towards 1T' phase at higher flunece. Our work provides a comprehensive understanding of the photoinduced phase transition in the 2H-MoTe2 system. △ Less

Submitted 7 October, 2023; v1 submitted 31 August, 2023; originally announced August 2023.

Comments: 9 pages, 11 figures

Journal ref: Phys. Rev. Applied 20, 034058 (2023)

High-Throughput Computational-Experimental Screening Protocol for the Discovery of Bimetallic Catalysts

Authors: Byung Chul Yeo, Hyunji Nam, Hyobin Nam, Min-Cheol Kim, Hong Woo Lee, Donghun Kim, Kwan-Young Lee, Seung Yong Lee, Sang Soo Han

Abstract: For decades of catalysis research, the d-band center theory that correlates the d-band center and the adsorbate binding energy has successfully enabled the accelerated discovery of novel catalyst materials. Recent studies indicate that, on top of the d-band center value, the full consideration of the d-band shapes describing higher moments of the d-band as well as sp-band properties can help bette… ▽ More For decades of catalysis research, the d-band center theory that correlates the d-band center and the adsorbate binding energy has successfully enabled the accelerated discovery of novel catalyst materials. Recent studies indicate that, on top of the d-band center value, the full consideration of the d-band shapes describing higher moments of the d-band as well as sp-band properties can help better capturing surface reactivity. However, the density-of-states (DOS) patterns themselves have never been used as a descriptor in combined computational-experimental studies. Here, we propose the full DOS patterns as a key descriptor in high-throughput screening protocols, and prove its effectiveness. For the hydrogen peroxide (H2O2) synthesis as our demo catalytic reaction, the present study focuses on discovering bimetallic catalysts that can replace the prototypic palladium (Pd) one. Through a series of screening processes based on DOS pattern similarities (evaluated using first-principles calculations) and synthetic feasibility, 9 candidates are finally proposed out of 4,350 bimetallic alloy, which then are expected to have a catalytic performance comparable to that of Pd. The subsequent experimental tests demonstrate that 4 bimetallic catalysts (Ni61Pt39, Au51Pd49, Pt52Pd48, Pd52Ni48) indeed exhibit the catalytic properties comparable to those of Pd. Moreover, we discovered a novel bimetallic (Ni-Pt) catalyst, which has not yet been reported for H2O2 direct synthesis. In particular, Ni61Pt39 outperforms the prototypical Pd catalyst for the chemical reaction and exhibits a 9.5-fold enhancement in cost-normalized productivity. This protocol provides a new opportunity for the catalyst discovery for the replacement or reduction in use of the platinum-group metals. △ Less

Submitted 16 September, 2020; originally announced September 2020.

electrochemically modeling a non-electrochemical system: hydrogen peroxide direct synthesis on palladium catalysts

Authors: Min-Cheol Kim, Sang Soo Han

Abstract: Nonelectrochemical hydrogen peroxide direct synthesis (HPDS) under ambient conditions is an environmentally benign and energy-efficient process that produces a green oxidizer. Despite its industrial importance, the reaction mechanism of HPDS is still controversial, even for the prototypical catalyst Pd. Density functional theory (DFT) calculations with a comprehensive consideration of entropic and… ▽ More Nonelectrochemical hydrogen peroxide direct synthesis (HPDS) under ambient conditions is an environmentally benign and energy-efficient process that produces a green oxidizer. Despite its industrial importance, the reaction mechanism of HPDS is still controversial, even for the prototypical catalyst Pd. Density functional theory (DFT) calculations with a comprehensive consideration of entropic and solvation effects reveal that the conventionally accepted Langmuir-Hinshelwood mechanism fails to explain why H2O2 production dominates over H2O production, which was experimentally reported. Inspired by the recently suggested heterolytic mechanism that involves electron and proton transfer at Pd catalysts, we propose a new electrochemical DFT model that is applicable for nonelectrochemical systems where a protonation intrinsically occurs. Our model is based on combining the Butler-Volmer equation and constant potential DFT with hybrid explicit-implicit solvent treatments. Application of this model to Pd(111) surfaces produces accurate descriptions of the activation barriers of both H2O2 and H2O production (within only ~0.1 eV of experimentally measured values). The heterolytic mechanism has a lower barrier for the protonation steps for H2O2 production than the nonelectrochemical hydrogenation steps, leading to advantageous kinetics for H2O2 production over H2O production. This work is the first theoretical and computational study supporting the heterolytic H2O2 production mechanism, and it resolves the unanswered discrepancies between previous experimental and DFT results. We expect that these results will readily help the systematic development of improved catalysts for H2O2 synthesis. △ Less

Submitted 11 August, 2020; originally announced August 2020.

Accelerated Map** of Electronic Density of States Patterns of Metallic Nanoparticles via Machine-Learning

Authors: Kihoon Bang, Byung Chul Yeo, Donghun Kim, Sang Soo Han, Hyuck Mo Lee

Abstract: Within first-principles density functional theory (DFT) frameworks, accurate but fast prediction of electronic structures of nanoparticles (NPs) remains challenging. Herein, we propose a machine-learning architecture to rapidly but reasonably predict electronic density of states (DOS) patterns of metallic NPs via a combination of principal component analysis (PCA) and the crystal graph convolution… ▽ More Within first-principles density functional theory (DFT) frameworks, accurate but fast prediction of electronic structures of nanoparticles (NPs) remains challenging. Herein, we propose a machine-learning architecture to rapidly but reasonably predict electronic density of states (DOS) patterns of metallic NPs via a combination of principal component analysis (PCA) and the crystal graph convolutional neural network (CGCNN). By applying PCA, one can convert a mathematically high-dimensional DOS image to a low-dimensional vector. The CGCNN plays a key role in reflecting the effects of local atomic structures on the DOS patterns of NPs with only a few of material features (e.g., melting temperature, the number of d electrons, and atomic radius) that are easily obtained from a periodic table. The PCA-CGCNN model is applicable for all pure and bimetallic NPs, in which a handful DOS training sets that are easily obtained with the typical DFT method, such as bulk, slab, and small-sized NPs, are considered. Although there is a small loss of accuracy with the PCA-CGCNN method compared to DFT calculations, the prediction speed is much faster than that of DFT methods and is not nearly as affected by the system sizes of NPs. Our approach not only can be immediately applied to predict electronic structures of actual nanometer scaled NPs to be experimentally synthesized, but also be used to explore correlations between atomic structures and other spectrum image data of the materials (e.g., X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy). △ Less

Submitted 21 July, 2020; originally announced July 2020.

Slab Graph Convolutional Neural Network for Discovery of N2 Electroreduction Catalysts

Authors: Myungjoon Kim, Byung Chul Yeo, Sang Soo Han, Donghun Kim

Abstract: The catalyst development for N2 electroreduction reaction (NRR) with low onset potential and high Faradaic efficiency is highly desired, but remains challenging. Machine learning (ML) recently emerged as a complementary tool to accelerate material discovery; however a ML model for NRR has yet to be developed. Here, we develop and report slab-graph convolutional neural network (SGCNN), an accurate… ▽ More The catalyst development for N2 electroreduction reaction (NRR) with low onset potential and high Faradaic efficiency is highly desired, but remains challenging. Machine learning (ML) recently emerged as a complementary tool to accelerate material discovery; however a ML model for NRR has yet to be developed. Here, we develop and report slab-graph convolutional neural network (SGCNN), an accurate and flexible ML model that is applicable to catalytic surface reactions. With the self-accumulated database of 2,699 surface calculations, SGCNN predict binding energies, ranging over 8 eV, of five key adsorbates (*H, *N2, *N2H, *NH, *NH2) related to NRR performance with the mean-absolute-error of only 0.23eV. Unlike previously available models, SGCNN avoids using ab initio level inputs, instead is solely based on elemental properties that are all readily available in Periodic-Table-of-Elements; true accelerations can be realized. t-distributed stochastic neighbor embedding (t-SNE) analysis reveals that binary intermetallics of averaged d-electron occupation between 4 and 5 could potentially lower the onset potential in N2 electroreduction. △ Less

Submitted 26 March, 2019; v1 submitted 7 December, 2018; originally announced December 2018.

Comments: We recently found errors in some of our computational results, and are now in the process of revising them. Since these results may confuse the readers, we would like to withdraw in the meantime, and to resubmit the new version after the revision processes completed

Pattern Learning Electronic Density of States

Authors: Byung Chul Yeo, Donghun Kim, Chansoo Kim, Sang Soo Han

Abstract: Electronic density of states (DOS) is a key factor in condensed matter physics and material science that determines the properties of metals. First-principles density-functional theory (DFT) calculations have typically been used to obtain the DOS despite the considerable computation cost. Herein, we report a fast pattern learning method for predicting the DOS patterns of not only bulk structures b… ▽ More Electronic density of states (DOS) is a key factor in condensed matter physics and material science that determines the properties of metals. First-principles density-functional theory (DFT) calculations have typically been used to obtain the DOS despite the considerable computation cost. Herein, we report a fast pattern learning method for predicting the DOS patterns of not only bulk structures but also surface structures in multi-component alloy systems by a principal component analysis. Within this framework, we use only four features to define the composition, atomic structure, and surfaces of alloys, which are the d-orbital occupation ratio, coordination number, mixing factor, and the inverse of miller indices. While the DFT method scales as O(N^3) in which N is the number of electrons in the system size, our pattern learning method can scale as O(1) regardless of N. Furthermore, our method provides a pattern similarity of 91~98% compared to DFT calculations. This reveals that our learning method will be an alternative that can break the trade-off relationship between accuracy and speed that is well known in the field of electronic structure calculations. △ Less

Submitted 9 August, 2018; originally announced August 2018.

Comments: 8 pages, 5 figures

Journal ref: Scientific Reports (2019)