-
Perspectives on viscoelastic flow instabilities and elastic turbulence
Authors:
Sujit S. Datta,
Arezoo M. Ardekani,
Paulo E. Arratia,
Antony N. Beris,
Irmgard Bischofberger,
Jens G. Eggers,
J. Esteban López-Aguilar,
Suzanne M. Fielding,
Anna Frishman,
Michael D. Graham,
Jeffrey S. Guasto,
Simon J. Haward,
Sarah Hormozi,
Gareth H. McKinley,
Robert J. Poole,
Alexander Morozov,
V. Shankar,
Eric S. G. Shaqfeh,
Amy Q. Shen,
Holger Stark,
Victor Steinberg,
Ganesh Subramanian,
Howard A. Stone
Abstract:
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the h…
▽ More
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the hallmarks of turbulence -- even though the effective Reynolds numbers may be $O(1)$ or smaller. We provide perspectives on viscoelastic flow instabilities by integrating the input from speakers at a recent international workshop: historical remarks, characterization of fluids and flows, discussion of experimental and simulation tools, and modern questions and puzzles that motivate further studies of this fascinating subject. The materials here will be useful for researchers and educators alike, especially as the subject continues to evolve in both fundamental understanding and applications in engineering and the sciences.
△ Less
Submitted 22 August, 2021;
originally announced August 2021.
-
Wrinkling and multiplicity in the dynamics of deformable sheets in uniaxial extensional flow
Authors:
Yijiang Yu,
Michael D. Graham
Abstract:
The processing of thin-structured materials in a fluidic environment, from nearly inextensible but flexible graphene sheets to highly extensible polymer films, arises in many applications. So far, little is known about the dynamics of such thin sheets freely suspended in fluid. In this work, we study the dynamics of freely suspended soft sheets in uniaxial extensional flow. Elastic sheets are mode…
▽ More
The processing of thin-structured materials in a fluidic environment, from nearly inextensible but flexible graphene sheets to highly extensible polymer films, arises in many applications. So far, little is known about the dynamics of such thin sheets freely suspended in fluid. In this work, we study the dynamics of freely suspended soft sheets in uniaxial extensional flow. Elastic sheets are modeled with a continuum model that accounts for in-plane deformation and out-of-plane bending, and the fluid motion is computed using the method of regularized Stokeslets. We explore two types of sheets: "stiff" sheets that strongly resist bending deformations and always stay flat, and "flexible" sheets with both in-plane and out-of plane deformability that can wrinkle. For stiff sheets, we observe a coil-stretch-like transition, similar to what has been observed for long-chain linear polymers under extension as well as elastic sheets under planar extension: in a certain range of capillary number (flow strength relative to in-plane deformability), the sheets exhibit either a compact or a highly stretched conformation, depending on deformation history. For flexible sheets, sheets with sufficiently small bending stiffness wrinkle to form various conformations. Here, the compact-stretched bistability still occurs, but is strongly modified by the wrinkling instability: a highly-stretched planar state can become unstable and wrinkle, after which it may dramatically shrink in length due to hydrodynamic screening associated with wrinkling. Therefore, wrinkling renders a shift in the bistability regime. In addition, we can predict and understand the nonlinear long-term dynamics for some parameter regimes with linear stability analysis of the flat steady states.
△ Less
Submitted 11 February, 2022; v1 submitted 9 July, 2021;
originally announced July 2021.
-
Constitutive modeling of dilute wormlike micelle solutions: shear-induced structure and transient dynamics
Authors:
Richard J. Hommel,
Michael D. Graham
Abstract:
We present a reformulation of the 'reactive rod model' (RRM) of Dutta and Graham [Dutta, Sarit and Graham, Michael D., JNNFM 251 (2018)], a constitutive model for describing the behavior of dilute wormlike micelle solutions. The RRM treats wormlike micelle solutions as dilute suspensions of rigid Brownian rods undergoing reversible scission and growth in flow. Evolution equations for micelle orien…
▽ More
We present a reformulation of the 'reactive rod model' (RRM) of Dutta and Graham [Dutta, Sarit and Graham, Michael D., JNNFM 251 (2018)], a constitutive model for describing the behavior of dilute wormlike micelle solutions. The RRM treats wormlike micelle solutions as dilute suspensions of rigid Brownian rods undergoing reversible scission and growth in flow. Evolution equations for micelle orientation and stress contribution are coupled to a kinetic reaction equation for a collective micelle length, producing dynamic variations in the length and rotational diffusivity of the rods. This model has previously shown success in capturing many critical steady-state rheological features of dilute wormlike micelle solutions, particularly shear-thickening and -thinning, non-zero normal stress differences, and a reentrant shear stress-shear rate curve, and could fit a variety of steady state experimental data. The present work improves on this framework, which showed difficulty in capturing transient dynamics and high-shear behavior, by reformulating the kinetic equation for micelle growth on a more microstructural (though still highly idealized) basis. In particular, we allow for micelle growth associated with strong alignment of rods and breakage due to tensile stresses along the micelles. This new formulation captures both steady and transient shear rheology in good agreement with experiments. We also find good agreement with available steady state extensional rheology.
△ Less
Submitted 14 September, 2021; v1 submitted 6 April, 2021;
originally announced April 2021.
-
Coil-stretch-like transition of elastic sheets in extensional flows
Authors:
Yijiang Yu,
Michael D. Graham
Abstract:
The conformation of a long linear polymer dissolved in fluid and exposed to an extensional flow is well-known to exhibit a "coil-stretch" transition, which for sufficiently long chains can lead to bistability. The present work reports computations indicating that an analogous "compact-stretched" transition arises in the dynamics of a thin elastic sheet. Sheets of nominally circular, square or rect…
▽ More
The conformation of a long linear polymer dissolved in fluid and exposed to an extensional flow is well-known to exhibit a "coil-stretch" transition, which for sufficiently long chains can lead to bistability. The present work reports computations indicating that an analogous "compact-stretched" transition arises in the dynamics of a thin elastic sheet. Sheets of nominally circular, square or rectangular shape are simulated in planar and biaxial flows using a finite element method for the sheet conformations and a regularized Stokeslet method for the fluid flow. If a neo-Hookean constitutive model is used for the sheet elasticity, the sheets will stretch without bound once a critical extension rate, as characterized nondimensionally by a capillary number, is exceeded. Nonlinear elasticity, represented with the Yeoh model, arrests the stretching, leading to a highly-stretched steady state once the critical capillary number is exceeded. For all shapes and in both planar and biaxial extension, a parameter regime exists in which both weakly stretched (compact) and strongly stretched states can be found, depending on initial conditions. I.e. this parameter regime displays bistability. As in the long-chain polymer case, the bistable behavior arises from the hydrodynamic interaction between distant elements of the sheet, and vanishes if these interactions are artificially screened by use of a Brinkman model for the fluid motion. While the sheets can transiently display wrinkled shapes, all final shapes in planar and biaxial extension are planar.
△ Less
Submitted 3 November, 2020; v1 submitted 9 September, 2020;
originally announced September 2020.
-
Flow-induced segregation and dynamics of red blood cells in sickle cell disease
Authors:
Xiao Zhang,
Christina Caruso,
Wilbur A. Lam,
Michael D. Graham
Abstract:
Blood flow in sickle cell disease (SCD) can substantially differ from normal blood flow due to significant alterations in the physical properties of the red blood cells (RBCs). Chronic complications, such as inflammation of the endothelial cells lining blood vessel walls, are associated with SCD, for reasons that are unclear. Here, detailed boundary integral simulations are performed to investigat…
▽ More
Blood flow in sickle cell disease (SCD) can substantially differ from normal blood flow due to significant alterations in the physical properties of the red blood cells (RBCs). Chronic complications, such as inflammation of the endothelial cells lining blood vessel walls, are associated with SCD, for reasons that are unclear. Here, detailed boundary integral simulations are performed to investigate an idealized model flow flow in SCD, a binary suspension of flexible biconcave discoidal fluid-filled capsules and stiff curved prolate capsules that represent healthy and sickle RBCs, respectively, subjected to pressure-driven flow in a planar slit. The key observation is that, unlike healthy RBCs that concentrate around the center of the channel and form an RBC-depleted layer (i.e. cell-free layer) next to the walls, sickle cells are largely drained from the bulk of the suspension and aggregate inside the cell-free layer, displaying strong margination. These cells are found to undergo a rigid-body-like rolling orbit near the walls. Furthermore, the additional shear stress on the walls induced by the presence of marginated cells is computed. Compared to the small fluctuations in wall shear stress for a suspension of healthy RBCs, large local peaks in wall shear stress are observed for the binary suspensions, due to the proximity of the marginated stiff cells to the walls. As endothelial cells are known to mechanotransduce physical forces such as aberrations in shear stress and convert them to physiological processes such as activation of inflammatory signals, these results may aid in understanding mechanisms for endothelial dysfunction associated with SCD.
△ Less
Submitted 5 April, 2020; v1 submitted 20 December, 2019;
originally announced December 2019.
-
Multiplicity of stable orbits for deformable prolate capsules in shear flow
Authors:
Xiao Zhang,
Michael D. Graham
Abstract:
This work investigates the orbital dynamics of a fluid-filled deformable prolate capsule in unbounded shear flow. The motion of the capsule is simulated using a model that incorporates shear elasticity, area dilatation, and bending resistance. Here the deformability of the capsule is characterized by capillary number Ca, which represents the ratio of viscous stresses to elastic restoring stresses.…
▽ More
This work investigates the orbital dynamics of a fluid-filled deformable prolate capsule in unbounded shear flow. The motion of the capsule is simulated using a model that incorporates shear elasticity, area dilatation, and bending resistance. Here the deformability of the capsule is characterized by capillary number Ca, which represents the ratio of viscous stresses to elastic restoring stresses. For a capsule with small bending stiffness, at a given Ca, the orientation converges over time towards a unique stable orbit independent of the initial orientation. With increasing Ca, four dynamical modes are found for the stable orbit: rolling, wobbling, oscillating-swinging, and swinging. For a capsule with large bending stiffness, multiplicity in the orbit dynamics is observed. When the viscosity ratio $λ\lesssim 1$, the long-axis of the capsule always tends towards a stable orbit in the flow-gradient plane, either tumbling or swinging, depending on Ca. When $λ\gtrsim 1$, the stable orbit of the capsule is a tumbling motion at low Ca, irrespective of the initial orientation. Upon increasing Ca, there is a symmetry-breaking bifurcation away from the tumbling orbit, and the capsule is observed to adopt multiple stable orbital modes including nonsymmetric precessing and rolling, depending on the initial orientation. As Ca further increases, the nonsymmetric stable orbit loses existence at a saddle-node bifurcation, and rolling becomes the only attractor at high Ca, whereas the rolling state coexists with the nonsymmetric state at intermediate values of Ca. A symmetry-breaking bifurcation away from the rolling orbit is also found upon decreasing Ca. The regime with multiple attractors becomes broader as the aspect ratio of the capsule increases, while narrowing as viscosity ratio increases. We also report the particle contribution to the stress, which also displays multiplicity.
△ Less
Submitted 15 November, 2019;
originally announced November 2019.
-
Margination regimes and drainage transition in confined multicomponent suspensions
Authors:
R. G. Henríquez Rivera,
K. Sinha,
M. D. Graham
Abstract:
A mechanistic theory is developed to describe segregation in confined multicomponent suspensions such as blood. It incorporates the two key phenomena arising in these systems at low Reynolds number: hydrodynamic pair collisions and wall-induced migration. In simple shear flow, several regimes of segregation arise, depending on the value of a "margination parameter" M. Most importantly, there is a…
▽ More
A mechanistic theory is developed to describe segregation in confined multicomponent suspensions such as blood. It incorporates the two key phenomena arising in these systems at low Reynolds number: hydrodynamic pair collisions and wall-induced migration. In simple shear flow, several regimes of segregation arise, depending on the value of a "margination parameter" M. Most importantly, there is a critical value of M below which a sharp "drainage transition" occurs: one component is completely depleted from the bulk flow to the vicinity of the walls. Direct simulations also exhibit this transition as the size or flexibility ratio of the components changes.
△ Less
Submitted 14 April, 2015;
originally announced April 2015.
-
Mechanism of margination in confined flows of blood and other multicomponent suspensions
Authors:
Amit Kumar,
Michael D. Graham
Abstract:
Flowing blood displays a phenomenon called margination, in which leukocytes and platelets are preferentially found near blood vessel walls, while erythrocytes are depleted from these regions. Here margination is investigated using direct hydrodynamic simulations of a binary suspension of stiff (s) and floppy (f) capsules, as well as a stochastic model that incorporates the key particle transport m…
▽ More
Flowing blood displays a phenomenon called margination, in which leukocytes and platelets are preferentially found near blood vessel walls, while erythrocytes are depleted from these regions. Here margination is investigated using direct hydrodynamic simulations of a binary suspension of stiff (s) and floppy (f) capsules, as well as a stochastic model that incorporates the key particle transport mechanisms in suspensions -- wall-induced hydrodynamic migration and shear-induced pair collisions. The stochastic model allows the relative importance of these two mechanisms to be directly evaluated and thereby indicates that margination, at least in the dilute case, is largely due to the differential dynamics of homogeneous (e.g. s-s) and heterogeneous (s-f) collisions
△ Less
Submitted 4 September, 2012; v1 submitted 4 August, 2012;
originally announced August 2012.
-
Segregation by membrane rigidity in flowing binary suspensions of elastic capsules
Authors:
Amit Kumar,
Michael D. Graham
Abstract:
Spatial segregation in the wall normal direction is investigated in suspensions containing a binary mixture of Neo-Hookean capsules subjected to pressure driven flow in a planar slit. The two components of the binary mixture have unequal membrane rigidities. The problem is studied numerically using an accelerated implementation of the boundary integral method. The effect of a variety of parameters…
▽ More
Spatial segregation in the wall normal direction is investigated in suspensions containing a binary mixture of Neo-Hookean capsules subjected to pressure driven flow in a planar slit. The two components of the binary mixture have unequal membrane rigidities. The problem is studied numerically using an accelerated implementation of the boundary integral method. The effect of a variety of parameters was investigated, including the capillary number, rigidity ratio between the two species, volume fraction, confinement ratio, and the number fraction of the more floppy particle $X_f$ in the mixture. It was observed that in suspensions of pure species, the mean wall normal positions of the stiff and the floppy particles are comparable. In mixtures, however, the stiff particles were found to be increasingly displaced towards the walls with increasing $X_f$, while the floppy particles were found to increasingly accumulate near the centerline with decreasing $X_f$. The origins of this segregation is traced to the effect of the number fraction $X_f$ on the localization of the stiff and the floppy particles in the near wall region -- the probability of escape of a stiff particle from the near wall region to the interior is greatly reduced with increasing $X_f$, while the exact opposite trend is observed for a floppy particle with decreasing $X_f$. Simple model studies on heterogeneous pair collisions involving a stiff and a floppy particle mechanistically explain this observation. The key result in these studies is that the stiff particle experiences much larger cross-stream displacement in heterogeneous collisions than the floppy particle. A unified mechanism incorporating the wall-induced migration of deformable particles and the particle fluxes associated with heterogeneous and homogeneous pair collisions is presented.
△ Less
Submitted 23 December, 2011; v1 submitted 29 September, 2011;
originally announced September 2011.
-
Accelerated boundary integral method for multiphase flow in non-periodic geometries
Authors:
Amit Kumar,
Michael D. Graham
Abstract:
An accelerated boundary integral method for Stokes flow of a suspension of deformable particles is presented for an arbitrary domain and implemented for the important case of a planar slit geometry. The computational complexity of the algorithm scales as O(N) or $O(N\log N$), where $N$ is proportional to the product of number of particles and the number of elements employed to discretize the parti…
▽ More
An accelerated boundary integral method for Stokes flow of a suspension of deformable particles is presented for an arbitrary domain and implemented for the important case of a planar slit geometry. The computational complexity of the algorithm scales as O(N) or $O(N\log N$), where $N$ is proportional to the product of number of particles and the number of elements employed to discretize the particle. This technique is enabled by the use of an alternative boundary integral formulation in which the velocity field is expressed in terms of a single layer integral alone, even in problems with non-matched viscosities. The density of the single layer integral is obtained from a Fredholm integral equation of the second kind involving the double layer integral. Acceleration in this implementation is provided by the use of General Geometry Ewald-like method (GGEM) for computing the velocity and stress fields driven by a set of point forces in the geometry of interest. For the particular case of the slit geometry, a Fourier-Chebyshev spectral discretization of GGEM is developed. Efficient implementations employing the GGEM methodology are presented for the resulting single and the double layer integrals. The implementation is validated with test problems on the velocity of rigid particles and drops between parallel walls in pressure driven flow, the Taylor deformation parameter of capsules in simple shear flow and the particle trajectory in pair collisions of capsules in shear flow. The computational complexity of the algorithm is verified with results from several large scale multiparticle simulations.
△ Less
Submitted 5 June, 2012; v1 submitted 29 September, 2011;
originally announced September 2011.
-
Diffusion and spatial correlations in suspensions of swimming particles
Authors:
Patrick T. Underhill,
Juan P. Hernández-Ortiz,
Michael D. Graham
Abstract:
Populations of swimming microorganisms produce fluid motions that lead to dramatically enhanced diffusion of tracer particles. Using simulations of suspensions of swimming particles in a periodic domain, we capture this effect and show that it depends qualitatively on the mode of swimming: swimmers ``pushed'' from behind by their flagella show greater enhancement than swimmers that are ``pulled'…
▽ More
Populations of swimming microorganisms produce fluid motions that lead to dramatically enhanced diffusion of tracer particles. Using simulations of suspensions of swimming particles in a periodic domain, we capture this effect and show that it depends qualitatively on the mode of swimming: swimmers ``pushed'' from behind by their flagella show greater enhancement than swimmers that are ``pulled'' from the front. The difference is manifested by an increase, that only occurs for pushers, of the diffusivity of passive tracers and the velocity correlation length with the size of the periodic domain. A physical argument supported by a mean field theory sheds light on the origin of these effects.
△ Less
Submitted 24 May, 2008;
originally announced May 2008.
-
Coarse Brownian Dynamics for Nematic Liquid Crystals: Bifurcation Diagrams via Stochastic Simulation
Authors:
C. I. Siettos,
M. D. Graham,
I. G. Kevrekidis
Abstract:
We demonstrate how time-integration of stochastic differential equations (i.e. Brownian dynamics simulations) can be combined with continuum numerical bifurcation analysis techniques to analyze the dynamics of liquid crystalline polymers (LCPs). Sidestep** the necessity of obtaining explicit closures, the approach analyzes the (unavailable in closed form) coarse macroscopic equations, estimati…
▽ More
We demonstrate how time-integration of stochastic differential equations (i.e. Brownian dynamics simulations) can be combined with continuum numerical bifurcation analysis techniques to analyze the dynamics of liquid crystalline polymers (LCPs). Sidestep** the necessity of obtaining explicit closures, the approach analyzes the (unavailable in closed form) coarse macroscopic equations, estimating the necessary quantities through appropriately initialized, short bursts of Brownian dynamics simulation. Through this approach, both stable and unstable branches of the equilibrium bifurcation diagram are obtained for the Doi model of LCPs and their coarse stability is estimated. Additional macroscopic computational tasks enabled through this approach, such as coarse projective integration and coarse stabilizing controller design, are also demonstrated.
△ Less
Submitted 20 November, 2002;
originally announced November 2002.
-
Slip, concentration fluctuations and flow instability in sheared polymer solutions
Authors:
William B. Black,
Michael D. Graham
Abstract:
Recent experiments suggest that shear-enhanced growth of concentration fluctuations in polymer solutions is strongly influenced by solid boundaries. We analyze the dynamics of a model of a sheared polymer solution, accounting for the effect of stress variations on mass flux and for wall-slip. If (and only if) these effects are present, the flow exhibits a boundary-localized instability consisten…
▽ More
Recent experiments suggest that shear-enhanced growth of concentration fluctuations in polymer solutions is strongly influenced by solid boundaries. We analyze the dynamics of a model of a sheared polymer solution, accounting for the effect of stress variations on mass flux and for wall-slip. If (and only if) these effects are present, the flow exhibits a boundary-localized instability consistent with experimental observations. Even in the absence of flow instability, thermally-driven concentration fluctuations are significantly enhanced near the boundary.
△ Less
Submitted 23 January, 2001;
originally announced January 2001.