-
Unveiling a Novel Metal-to-Metal Transition in LuH2: Critically Challenging Superconductivity Claims in Lutetium Hydrides
Authors:
Dong Wang,
Ningning Wang,
Caoshun Zhang,
Chunsheng Xia,
Weicheng Guo,
Xia Yin,
Kejun Bu,
Takeshi Nakagawa,
Jianbo Zhang,
Federico Gorelli,
Philip Dalladay-Simpson,
Thomas Meier,
Xujie Lü,
Liling Sun,
**guang Cheng,
Qiaoshi Zeng,
Yang Ding,
Ho-kwang Mao
Abstract:
Following the recent report by Dasenbrock-Gammon et al. (2023) of near-ambient superconductivity in nitrogen-doped lutetium trihydride (LuH3-δNε), significant debate has emerged surrounding the composition and interpretation of the observed sharp resistance drop. Here, we meticulously revisit these claims through comprehensive characterization and investigations. We definitively identify the repor…
▽ More
Following the recent report by Dasenbrock-Gammon et al. (2023) of near-ambient superconductivity in nitrogen-doped lutetium trihydride (LuH3-δNε), significant debate has emerged surrounding the composition and interpretation of the observed sharp resistance drop. Here, we meticulously revisit these claims through comprehensive characterization and investigations. We definitively identify the reported material as lutetium dihydride (LuH2), resolving the ambiguity surrounding its composition. Under similar conditions (270-295 K and 1-2 GPa), we replicate the reported sharp decrease in electrical resistance with a 30% success rate, aligning with Dasenbrock-Gammon et al.'s observations. However, our extensive investigations reveal this phenomenon to be a novel, pressure-induced metal-to-metal transition intrinsic to LuH2, distinct from superconductivity. Intriguingly, nitrogen do** exerts minimal impact on this transition. Our work not only elucidates the fundamental properties of LuH2 and LuH3 but also critically challenges the notion of superconductivity in these lutetium hydride systems. These findings pave the way for future research on lutetium hydride systems while emphasizing the crucial importance of rigorous verification in claims of ambient temperature superconductivity.
△ Less
Submitted 28 January, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
Probing superconducting gap in CeH$_9$ under pressure
Authors:
Zi-Yu Cao,
Seokmin Choi,
Liu-Cheng Chen,
Philip Dalladay-Simpson,
Harim Jang,
Federico Aiace Gorelli,
Jia-Feng Yan,
Soon-Gil Jung,
Ge Huang,
Lan Yu,
Yongjae Lee,
Jaeyong Kim,
Tuson Park,
Xiao-Jia Chen
Abstract:
The recent discovery of superconductivity in hydrogen-rich compounds has garnered significant experimental and theoretical interest because of the record-setting critical temperatures. As the direct observation of the superconducting (SC) gap in these superhydrides is rare, the underlying mechanism behind its occurrence has yet to be settled down. Here, we report a successful synthesis of the…
▽ More
The recent discovery of superconductivity in hydrogen-rich compounds has garnered significant experimental and theoretical interest because of the record-setting critical temperatures. As the direct observation of the superconducting (SC) gap in these superhydrides is rare, the underlying mechanism behind its occurrence has yet to be settled down. Here, we report a successful synthesis of the $\textit{P6$_3$}$/$\textit{mmc}$ phase of CeH$_9$ that exhibits the SC transition with SC critical temperature of about 100 K at a pressure of about 100 GPa. The observation of the zero electrical resistance and the critical current demonstrates that the SC phase is realized in Ce-based superhydride. Quasiparticle scattering spectroscopy (QSS) reveals the Andreev reflection at zero bias voltage, a hallmark of superconductivity, in the differential conductance. The obtained SC gap-to-$\textit{T}$$_c$ ratio of 4.36 and temperature dependence of SC gap are consistent with the prediction from the Bardeen-Cooper-Schrieffer theory with a moderate coupling strength. The successful realization of QSS under Megabar conditions is expected to provide a desired route to the study of the mechanism of superconductivity as well as the establishment of the SC phase in superhydride high-$\textit{T}$$_c$ systems.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Synthesis of Superconducting Phase of La$_{0.5}$Ce$_{0.5}$H$_{10}$ at High Pressures
Authors:
Ge Huang,
Tao Luo,
Philip Dalladay-Simpson,
Liu-Cheng Chen,
Zi-Yu Cao,
Di Peng,
Federico A. Gorelli,
Guo-Hua Zhong,
Hai-Qing Lin,
Xiao-Jia Chen
Abstract:
Clathrate hydride \emph{Fm}\={3}\emph{m}-LaH$_{10}$ has been proven as the most extraordinary superconductor with the critical temperature $T_c$ above 250 K upon compression of hundreds of GPa in recent years. A general hope is to reduce the stabilization pressure and maintain the high $T_c$ value of the specific phase in LaH$_{10}$. However, strong structural instability distorts \emph{Fm}\={3}\e…
▽ More
Clathrate hydride \emph{Fm}\={3}\emph{m}-LaH$_{10}$ has been proven as the most extraordinary superconductor with the critical temperature $T_c$ above 250 K upon compression of hundreds of GPa in recent years. A general hope is to reduce the stabilization pressure and maintain the high $T_c$ value of the specific phase in LaH$_{10}$. However, strong structural instability distorts \emph{Fm}\={3}\emph{m} structure and leads to a rapid decrease of $T_c$ at low pressures. Here, we investigate the phase stability and superconducting behaviors of \emph{Fm}\={3}\emph{m}-LaH$_{10}$ with enhanced chemical pre-compression through partly replacing La by Ce atoms from both experiments and calculations. For explicitly characterizing the synthesized hydride, we choose lanthanum-cerium alloy with stoichiometry composition of 1:1. X-ray diffraction and Raman scattering measurements reveal the stabilization of \emph{Fm}\={3}\emph{m}-La$_{0.5}$Ce$_{0.5}$H$_{10}$ in the pressure range of 140-160 GPa. Superconductivity with $T_c$ of 175$\pm$2 K at 155 GPa is confirmed with the observation of the zero-resistivity state and supported by the theoretical calculations. These findings provide applicability in the future explorations for a large variety of hydrogen-rich hydrides.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
Synthesis and Superconductivity in Yttrium-Cerium Hydrides at Moderate Pressures
Authors:
Liu-Cheng Chen,
Tao Luo,
Philip Dalladay-Simpson,
Ge Huang,
Zi-Yu Cao,
Di Peng,
Federico Aiace Gorelli,
Guo-Hua Zhong,
Hai-Qing Lin,
Xiao-Jia Chen
Abstract:
Inspired by the high critical temperature in yttrium superhydride and the low stabilized pressure in superconducting cerium superhydride, we carry out four independent runs to synthesize yttrium-cerium alloy hydrides. The phases examined by the Raman scattering and x-ray diffraction measurements. The superconductivity is detected with the zero-resistance state at the critical temperature in the ra…
▽ More
Inspired by the high critical temperature in yttrium superhydride and the low stabilized pressure in superconducting cerium superhydride, we carry out four independent runs to synthesize yttrium-cerium alloy hydrides. The phases examined by the Raman scattering and x-ray diffraction measurements. The superconductivity is detected with the zero-resistance state at the critical temperature in the range of 97-140 K at pressures ranging from 114 GPa to 120$\pm$4 GPa. The maximum critical temperature of the synthesized hydrides is larger than those reported for cerium hydrides, while the corresponding stabilized pressure is much lower than those for superconducting yttrium hydrides. The structural analysis and theoretical calculations suggest that the phase of Y$_{0.5}$Ce$_{0.5}$H$_9$ has the space group $P6_3/mmc$ with the calculated critical temperature of 119 K, in fair agreement with the experiments. These results indicate that alloying superhydrides indeed can maintain relatively high critical temperature at modest pressures accessible by many laboratories.
△ Less
Submitted 10 August, 2022;
originally announced August 2022.
-
High-Pressure Structural Evolution of Disordered Polymeric CS$_2$
Authors:
**wey Yan,
Ondrej Tóth,
Wan Xu,
Xiao-Di Liu,
Eugene Gregoryanz,
Philip Dalladay-Simpson,
Zeming Qi,
Shiyu Xie,
Federico Gorelli,
Roman Martoňák,
Mario Santoro
Abstract:
Carbon disulfide, CS$_2$, is an archetypal double-bonded molecular system belonging to the rich class of group IV-group VI, AB$_2$ compounds. It is widely and since long time believed that upon compression at several GPa a polymeric chain of type (-(C=S)-S-)$_n$ named Bridgman's black polymer will form. By combining optical spectroscopy and synchrotron X-ray diffraction data with ab initio simulat…
▽ More
Carbon disulfide, CS$_2$, is an archetypal double-bonded molecular system belonging to the rich class of group IV-group VI, AB$_2$ compounds. It is widely and since long time believed that upon compression at several GPa a polymeric chain of type (-(C=S)-S-)$_n$ named Bridgman's black polymer will form. By combining optical spectroscopy and synchrotron X-ray diffraction data with ab initio simulations, we demonstrate that the structure of the Bridgman's black polymer is remarkably different. Solid molecular CS$_2$ undergoes a pressure-induced structural transformation at around 10-11 GPa, develo** a disordered polymeric system. The polymer consists of 3-fold and 4-fold coordinated carbon atoms with an average carbon coordination continuously increasing upon further compression to 40 GPa. Polymerization also gives rise to some C=C double bonds. Upon decompression, the structural changes are partially reverted, a very small amount of molecular CS$_2$ is recovered, while the sample undergoes partial chemical disproportionation. Our work uncovers the non-trivial high-pressure structural evolution in one of the simplest molecular systems exhibiting molecular as well as polymeric phases.
△ Less
Submitted 8 April, 2021;
originally announced April 2021.
-
Molecular and polymeric amorphous forms in dense SO$_2$
Authors:
Huichao Zhang,
Ondrej Tóth,
Xiao-Di Liu,
Roberto Bini,
Eugene Gregoryanz,
Philip Dalladay-Simpson,
Simone De Panfilis,
Mario Santoro,
Federico Gorelli,
Roman Martoňák
Abstract:
We report here a study of reversible pressure-induced structural transformation between two amorphous forms of SO$_2$: molecular at pressures below 26 GPa and polymeric above this pressure, at temperatures of 77 - 300 K. The transformation was observed by Raman spectroscopy and x-ray diffraction in a diamond anvil cell. The same phenomenon was also observed in ab initio molecular dynamics simulati…
▽ More
We report here a study of reversible pressure-induced structural transformation between two amorphous forms of SO$_2$: molecular at pressures below 26 GPa and polymeric above this pressure, at temperatures of 77 - 300 K. The transformation was observed by Raman spectroscopy and x-ray diffraction in a diamond anvil cell. The same phenomenon was also observed in ab initio molecular dynamics simulations where both forward and reverse transitions were detected, allowing to analyze in detail the atomic structure of both phases. The high-pressure polymeric amorphous form was found to consist mainly of disordered polymeric chains made of 3-coordinated sulfur atoms connected via oxygen atoms, and few residual intact molecules. The simulation results are in good agreement with experimental data. Our observations suggest a possible existence of molecular liquid - polymeric liquid transition in SO$_2$ and show a case example of polyamorphism in system consisting of simple molecules with multiple bonds.
△ Less
Submitted 10 October, 2019;
originally announced October 2019.
-
Micro-beam and pulsed laser beam techniques for the micro-fabrication of diamond surface and bulk structures
Authors:
S. Sciortino,
M. Bellini,
F. Bosia,
S. Calusi,
C. Corsi,
C. Czelusniak,
N. Gelli,
L. Giuntini,
F. Gorelli,
S. Lagomarsino,
P. A. Mando,
M. Massi,
P. Olivero,
G. Parrini,
M. Santoro,
A. Sordini,
A. Sytchkova,
F. Taccetti,
M. Vannoni
Abstract:
Micro-fabrication in diamond is involved in a wide set of emerging technologies, exploiting the exceptional characteristics of diamond for application in bio-physics, photonics, radiation detection. Micro ion-beam irradiation and pulsed laser irradiation are complementary techniques, which permit the implementation of complex geometries, by modification and functionalization of surface and/or bulk…
▽ More
Micro-fabrication in diamond is involved in a wide set of emerging technologies, exploiting the exceptional characteristics of diamond for application in bio-physics, photonics, radiation detection. Micro ion-beam irradiation and pulsed laser irradiation are complementary techniques, which permit the implementation of complex geometries, by modification and functionalization of surface and/or bulk material, modifying the optical, electrical and mechanical characteristics of the material. In this article we summarize the work done in Florence (Italy) concerning ion beam and pulsed laser beam micro-fabrication in diamond.
△ Less
Submitted 25 August, 2016;
originally announced August 2016.
-
Robust luminescence of the silicon-vacancy center in diamond at high temperatures
Authors:
Stefano Lagomarsino,
Federico Gorelli,
Mario Santoro,
Nicole Fabbri,
Ahmed Hajeb,
Silvio Sciortino,
Lara Palla,
Caroline Czelusniak,
Mirko Massi,
Francesco Taccetti,
Lorenzo Giuntini,
Nicla Gelli,
Dmitry Yu Fedyanin,
Francesco Saverio Cataliotti,
Costanza Toninelli,
Mario Agio
Abstract:
We performed high-temperature luminescence studies of silicon-vacancy color centers obtained by ion implantation in single crystal diamond. We observed reduction of the integrated fluorescence upon increasing temperature, ascribable to a transition channel with an activation energy of 180 meV that populates a shelving state. Nonetheless, the signal decreased only 50% and 75% with respect to room t…
▽ More
We performed high-temperature luminescence studies of silicon-vacancy color centers obtained by ion implantation in single crystal diamond. We observed reduction of the integrated fluorescence upon increasing temperature, ascribable to a transition channel with an activation energy of 180 meV that populates a shelving state. Nonetheless, the signal decreased only 50% and 75% with respect to room temperature at 500 K and 700 K, respectively. In addition, the color center is found highly photostable at temperatures exceeding 800 K. The luminescence of this color center is thus extremely robust even at large temperatures and it holds promise for novel diamond-based light-emitting devices.
△ Less
Submitted 22 October, 2015;
originally announced October 2015.
-
Liquid-like behavior of supercritical fluids
Authors:
Federico Gorelli,
Mario Santoro,
Tullio Scopigno,
Michael Krisch,
Giancarlo Ruocco
Abstract:
The high frequency dynamics of fluid oxygen have been investigated by Inelastic X-ray Scattering. In spite of the markedly supercritical conditions ($T\approx 2 T_c$, $P>10^2 P_c$), the sound velocity exceeds the hydrodynamic value of about 20%, a feature which is the fingerprint of liquid-like dynamics. The comparison of the present results with literature data obtained in several fluids allow…
▽ More
The high frequency dynamics of fluid oxygen have been investigated by Inelastic X-ray Scattering. In spite of the markedly supercritical conditions ($T\approx 2 T_c$, $P>10^2 P_c$), the sound velocity exceeds the hydrodynamic value of about 20%, a feature which is the fingerprint of liquid-like dynamics. The comparison of the present results with literature data obtained in several fluids allow us to identify the extrapolation of the liquid vapor-coexistence line in the ($P/P_c$, $T/T_c$) plane as the relevant edge between liquid- and gas-like dynamics. More interestingly, this extrapolation is very close to the non metal-metal transition in hot dense fluids, at pressure and temperature values as obtained by shock wave experiments. This result points to the existence of a connection between structural modifications and transport properties in dense fluids.
△ Less
Submitted 2 November, 2006;
originally announced November 2006.
-
Pressure-tuning of the electron-phonon coupling: the insulator to metal transition in manganites
Authors:
P. Postorino,
A. Congeduti,
P. Dore,
F. A. Gorelli,
L. Ulivi,
A. Sacchetti,
A. Kumar,
D. D. Sarma
Abstract:
A comprehensive understanding of the physical origin of the unique magnetic and transport properties of A_(1-x)A'^xMnO_3 manganites (A = trivalent rare-earth and A' = divalent alkali-earth metal) is still far from being achieved. The complexity of these systems arises from the interplay among several competing interactions of comparable strength. Recently the electron-phonon coupling, triggered…
▽ More
A comprehensive understanding of the physical origin of the unique magnetic and transport properties of A_(1-x)A'^xMnO_3 manganites (A = trivalent rare-earth and A' = divalent alkali-earth metal) is still far from being achieved. The complexity of these systems arises from the interplay among several competing interactions of comparable strength. Recently the electron-phonon coupling, triggered by a Jahn-Teller distortion of the MnO_6 octahedra, has been recognised to play an essential role in the insulator to metal transition and in the closely related colossal magneto-resistance. The pressure tuning of the octahedral distortion gives a unique possibility to separate the basic interactions and, at least in principle, to follow the progressive transformation of a manganite from an intermediate towards a weak electron-phonon coupling regime. Using a diamond anvil cell, temperature and pressure-dependent infrared absorption spectra of La_(0.75)Ca_(0.25)MnO_3 have been collected and, from the spectral weight analysis, the pressure dependence of the insulator to metal transition temperature T_IM has been determined for the first time up to 11.2 GPa. The T_IM(P) curve we proposed to model the present data revealed a universality character in accounting for the whole class of intermediate coupling compounds. This property can be exploited to distinguish the intermediate from the weak coupling compounds pointing out the fundamental differences between the two coupling regimes.
△ Less
Submitted 23 January, 2003;
originally announced January 2003.
-
Crystal structure of solid Oxygen at high pressure and low temperature
Authors:
Federico A. Gorelli,
Mario Santoro,
Lorenzo Ulivi,
Michael Hanfland
Abstract:
Results of X-ray diffraction experiments on solid oxygen at low temperature and at pressures up to 10 GPa are presented.A careful sample preparation and annealing around 240 K allowed to obtain very good diffraction patterns in the orthorhombic delta-phase. This phase is stable at low temperature, in contrast to some recent data [Y. Akahama et al., Phys. Rev. B64, 054105 (2001)], and transforms…
▽ More
Results of X-ray diffraction experiments on solid oxygen at low temperature and at pressures up to 10 GPa are presented.A careful sample preparation and annealing around 240 K allowed to obtain very good diffraction patterns in the orthorhombic delta-phase. This phase is stable at low temperature, in contrast to some recent data [Y. Akahama et al., Phys. Rev. B64, 054105 (2001)], and transforms with decreasing pressure into a monoclinic phase, which is identified as the low pressure alpha-phase. The discontinuous change of the lattice parameters, and the observed metastability of the alpha-phase increasing pressure suggest that the transition is of the first order.
△ Less
Submitted 21 November, 2001;
originally announced November 2001.
