-
Ruddlesden-Popper chalcogenides push the limit of mechanical stiffness and glass-like thermal conductivity in crystals
Authors:
Md Shafkat Bin Hoque,
Eric R. Hoglund,
Boyang Zhao,
De-Liang Bao,
Hao Zhou,
Sandip Thakur,
Eric Osei-Agyemang,
Khalid Hattar,
Ethan A. Scott,
Mythili Surendran,
John A. Tomko,
John T. Gaskins,
Kiumars Aryana,
Sara Makarem,
Ganesh Balasubramanian,
Ashutosh Giri,
Tianli Feng,
Jordan A. Hachtel,
Jayakanth Ravichandran,
Sokrates T. Pantelides,
Patrick E. Hopkins
Abstract:
Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded…
▽ More
Insulating materials featuring ultralow thermal conductivity for diverse applications also require robust mechanical properties. Conventional thinking, however, which correlates strong bonding with high atomic-vibration-mediated heat conduction, led to diverse weakly bonded materials that feature ultralow thermal conductivity and low elastic moduli. One must, therefore, search for strongly-bonded materials in which heat transport is impeded by other means. Here, we report intrinsic, glass-like, ultralow thermal conductivity and ultrahigh elastic-modulus/thermal-conductivity ratio in single-crystalline, BaZrS3-derived, Ruddlesden-Popper phases Ban+1ZrnS3n+1, n = 2, 3. Their key features are strong anharmonicity and intra-unit-cell rock-salt blocks. The latter produce strongly bonded intrinsic superlattices, impeding heat conduction by broadband reduction of phonon velocities and mean free paths and concomitant strong phonon localization. The present study initiates a paradigm of "mechanically stiff phonon glasses".
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Validation of the Wiedemann-Franz Law in solid and molten tungsten above 2000 K through thermal conductivity measurements via steady state temperature differential radiometry
Authors:
Milena Milich,
Hunter B. Schonfeld,
Konstantinos Boboridis,
Davide Robba,
Luka Vlahovic,
Rudy Konings,
Jeffrey L. Braun,
John T. Gaskins,
Niraj Bhatt,
Ashutosh Giri,
Patrick E. Hopkins
Abstract:
We measure the thermal conductivity of solid and molten tungsten using Steady State Temperature Differential Radiometry. We demonstrate that the thermal conductivity can be well described by application of Wiedemann-Franz Law to electrical resistivity data, thus suggesting the validity of Wiedemann-Franz Law to capture the electronic thermal conductivity of metals in their molten phase. We further…
▽ More
We measure the thermal conductivity of solid and molten tungsten using Steady State Temperature Differential Radiometry. We demonstrate that the thermal conductivity can be well described by application of Wiedemann-Franz Law to electrical resistivity data, thus suggesting the validity of Wiedemann-Franz Law to capture the electronic thermal conductivity of metals in their molten phase. We further support this conclusion using ab initio molecular dynamics simulations with a machine-learned potential. Our results show that at these high temperatures, the vibrational contribution to thermal conductivity is negligible compared to the electronic component.
△ Less
Submitted 2 September, 2023;
originally announced September 2023.
-
Resolving the microscopic hydrodynamics at the moving contact line
Authors:
Amal K. Giri,
Paolo Malgaretti,
Dirk Peschka,
Marcello Sega
Abstract:
The molecular structure of moving contact lines (MCLs) and the emergence of a corresponding macroscopic dissipation have made the MCL a paradigm of fluid dynamics. Through novel averaging techniques that remove capillary waves smearing we achieve an unprecedented resolution in molecular dynamics (MD) simulations and find that they match with the continuum description obtained by finite element met…
▽ More
The molecular structure of moving contact lines (MCLs) and the emergence of a corresponding macroscopic dissipation have made the MCL a paradigm of fluid dynamics. Through novel averaging techniques that remove capillary waves smearing we achieve an unprecedented resolution in molecular dynamics (MD) simulations and find that they match with the continuum description obtained by finite element method (FEM) down to molecular scales. This allows us to distinguish dissipation at the liquid-solid interface (Navier-slip) and at the contact line, the latter being negligible for the rather smooth substrate considered.
△ Less
Submitted 1 November, 2022;
originally announced November 2022.
-
Quasi-one-dimensional uniform spin-$\frac{1}{2}$ Heisenberg antiferromagnet KNaCuP$_2$O$_7$ probed by $^{31}$P and $^{23}$Na NMR
Authors:
S. Guchhait,
Qing-** Ding,
M. Sahoo,
A. Giri,
S. Maji,
Y. Furukawa,
R. Nath
Abstract:
We present the structural and magnetic properties of KNaCuP$_2$O$_7$ investigated via x-ray diffraction, magnetization, specific heat, and $^{31}$P NMR and $^{23}$Na NMR measurements and complementary electronic structure calculations. The temperature dependent magnetic susceptibility and $^{31}$P NMR shift could be modeled very well by the uniform spin-$1/2$ Heisenberg antiferromagnetic chain mod…
▽ More
We present the structural and magnetic properties of KNaCuP$_2$O$_7$ investigated via x-ray diffraction, magnetization, specific heat, and $^{31}$P NMR and $^{23}$Na NMR measurements and complementary electronic structure calculations. The temperature dependent magnetic susceptibility and $^{31}$P NMR shift could be modeled very well by the uniform spin-$1/2$ Heisenberg antiferromagnetic chain model with nearest-neighbour interaction $J/k_{\rm B}\simeq 58.7$ K. The corresponding map** using first principles electronic structure calculations leads to $J^{\rm DFT}/k_{\rm B} \simeq 59$ K with negligibly small inter-chain couplings ($J^{\prime}/k_{\rm B}$, $J^{\prime \prime}/k_{\rm B} < 0.1$ K), further confirming that the system is indeed an one-dimensional uniform spin-$1/2$ Heisenberg antiferromagnet. The temperature-dependent unit cell volume could be described well using the Debye approximation with a Debye temperature of $Θ_{\rm D} \simeq 294$ K, consistent with the heat capacity data. The diverging trend of the NMR spin-lattice relaxation rates ($^{31}1/T_1$ and $^{23}1/T_1$) imply the onset of a magnetic long-range-ordering at very low temperatures supporting the anticipated $T_{\rm N} \simeq 0.38$ K from the inter-chain couplings. Moreover, the NMR spin-lattice relaxation rates show the dominant contributions from uniform ($q=0$) and staggered ($q = \pm π/a$) spin fluctuations in the high and low temperature regimes, respectively mimicking one-dimensionality of the spin-lattice. We have also demonstrated that $^{31}1/T_1$ in high temperatures varies linearly with $1/\sqrt{H}$ reflecting the effect of spin diffusion on the dynamic susceptibility. Further, the inter-chain frustration also substantially impede the magnetic ordering rendering the spin-lattice a perfect one-dimensional uniform spin-$1/2$ Heisenberg antiferromagnet over a wide temperature range.
△ Less
Submitted 22 June, 2021; v1 submitted 31 March, 2021;
originally announced March 2021.
-
Interface controlled thermal properties of ultra-thin chalcogenide-based phase change memory devices
Authors:
Kiumars Aryana,
John T. Gaskins,
Joyeeta Nag,
Derek A. Stewart,
Zhaoqiang Bai,
Saikat Mukhopadhyay,
John C. Read,
David H. Olson,
Eric R. Hoglund,
James M. Howe,
Ashutosh Giri,
Michael K. Grobis,
Patrick E. Hopkins
Abstract:
Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close…
▽ More
Phase change memory (PCM) is a rapidly growing technology that not only offers advancements in storage-class memories but also enables in-memory data storage and processing towards overcoming the von Neumann bottleneck. In PCMs, the primary mechanism for data storage is thermal excitation. However, there is a limited body of research regarding the thermal properties of PCMs at length scales close to the memory cell dimension and, thus, the impact of interfaces on PCM operation is unknown. Our work presents a new paradigm to manage thermal transport in memory cells by manipulating the interfacial thermal resistance between the phase change unit and the electrodes without incorporating additional insulating layers. Experimental measurements show a substantial change in thermal boundary resistance as GST transitions from one crystallographic structure (cubic) to another (hexagonal) and as the thickness of tungsten contacts is reduced from five to two nanometers. Simulations reveal that interfacial resistance between the phase change unit and its adjacent layer can reduce the reset current for 20 and 120 nm diameter devices by up to ~40% and ~50%, respectively. The resultant phase-dependent and geometric effects on thermal boundary resistance dictate that the effective thermal conductivity of the phase change unit can be reduced by a factor of four, presenting a new opportunity to reduce operating currents in PCMs.
△ Less
Submitted 10 November, 2020;
originally announced November 2020.
-
Evaluation of Porosity for Gamma Irradiated Poly(ethylene oxide): A New Approach Using Microscopic Image Aided with Computer Programming
Authors:
Subir K. Patla,
Madhumita Mukhopadhyay,
Abhra Giri,
Ruma Ray,
Sujata Tarafdar
Abstract:
Porous polymer films of Poly(ethylene oxide)(PEO) are synthesized by solution casting technique using gamma irradiated: (a) PEO powder (S-series) and (b) PEO - methanol solution (L-series). Pore phase forms instantaneously during preparation. Optimization of the pore content and distribution enables tailoring of associated properties for multifaceted applications. This method could be analyzed for…
▽ More
Porous polymer films of Poly(ethylene oxide)(PEO) are synthesized by solution casting technique using gamma irradiated: (a) PEO powder (S-series) and (b) PEO - methanol solution (L-series). Pore phase forms instantaneously during preparation. Optimization of the pore content and distribution enables tailoring of associated properties for multifaceted applications. This method could be analyzed for map** of porosity and average pore size. Practicability and repeatability of the developed programme has been established for monophasic system using backscattered imaging mode of SEM. This program is underdevelopment, but PROGIMAGE-POR bears the novelty of using image from either 2D-or 3D imaging system and could be applied for intricate composite/layered system.
△ Less
Submitted 10 June, 2018;
originally announced June 2018.
-
Titanium Contacts to Graphene: Process-Induced Variability in Electronic and Thermal Transport
Authors:
Keren M. Freedy,
Ashutosh Giri,
Brian M. Foley,
Matthew R. Barone,
Patrick E. Hopkins,
Stephen McDonnell
Abstract:
Contact Resistance (RC) is a major limiting factor in the performance of graphene devices. RC is sensitive to the quality of the interface and the composition of the contact, which are affected by the graphene transfer process and contact deposition conditions. In this work, a linear correlation is observed between the composition of Ti contacts, characterized by X-ray photoelectron spectroscopy,…
▽ More
Contact Resistance (RC) is a major limiting factor in the performance of graphene devices. RC is sensitive to the quality of the interface and the composition of the contact, which are affected by the graphene transfer process and contact deposition conditions. In this work, a linear correlation is observed between the composition of Ti contacts, characterized by X-ray photoelectron spectroscopy, and the Ti/graphene (Gr) contact resistance measured by the transfer length method. We find that contact composition is tunable via deposition rate and base pressure. Reactor base pressure is found to effect the resultant contact resistance. The effect of contact deposition conditions on thermal transport measured by time-domain thermoreflectance is also reported and interfaces with higher oxide composition appear to result in a lower thermal boundary conductance. Possible origins of this thermal boundary conductance change with oxide composition are discussed.
△ Less
Submitted 1 December, 2017;
originally announced December 2017.
-
Thermal boundary conductance across epitaxial ZnO/GaN interfaces: Assessment of phonon gas models and atomistic Green's function approaches for predicting interfacial phonon transport
Authors:
John T. Gaskins,
George Kotsonis,
Ashutosh Giri,
Christopher T. Shelton,
Edward Sachet,
Zhe Cheng,
Brian M. Foley,
Zeyu Liu,
Shenghong Ju,
Junichiro,
Mark S. Goorsky,
Samuel Graham,
Tengfei Luo,
Asegun Henry,
Jon-Paul Maria,
Patrick E. Hopkins
Abstract:
We present experimental measurements of the thermal boundary conductance (TBC) from $77 - 500$ K across isolated heteroepitaxially grown ZnO films on GaN substrates. These data provide an assessment of the assumptions that drive the phonon gas model-based diffuse mismatch models (DMM) and atomistic Green's function (AGF) formalisms for predicting TBC. Our measurements, when compared to previous ex…
▽ More
We present experimental measurements of the thermal boundary conductance (TBC) from $77 - 500$ K across isolated heteroepitaxially grown ZnO films on GaN substrates. These data provide an assessment of the assumptions that drive the phonon gas model-based diffuse mismatch models (DMM) and atomistic Green's function (AGF) formalisms for predicting TBC. Our measurements, when compared to previous experimental data, suggest that the TBC can be influenced by long wavelength, zone center modes in a material on one side of the interface as opposed to the "vibrational mismatch" concept assumed in the DMM; this disagreement is pronounced at high temperatures. At room temperature, we measure the ZnO/GaN TBC as $490\lbrack +150, -110\rbrack$ MW m$^{-2}$ K$^{-1}$. The disagreement among the DMM and AGF and the experimental data these elevated temperatures suggests a non-negligible contribution from additional modes contributing to TBC that not accounted for in the fundamental assumptions of these harmonic formalisms, such as inelastic scattering. Given the high quality of these ZnO/GaN interface, these results provide an invaluable critical and quantitive assessment of the accuracy of assumptions in the current state of the art of computational approaches for predicting the phonon TBC across interfaces.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Small-mass atomic defects enhance vibrational thermal transport at disordered interfaces with ultrahigh thermal boundary conductance
Authors:
Ashutosh Giri,
Sean W. King,
William A. Lanford,
Antonio R. Mei,
Devin Merril,
Liza Ross,
Ron Oviedo,
John Richards,
David H. Olson,
Jeffrey L. Braun,
John T. Gaskins,
Freddy DeAngelis,
Asegun Henry,
Patrick E. Hopkins
Abstract:
The role of interfacial nonidealities and disorder on thermal transport across interfaces is traditionally assumed to add resistance to heat transfer, decreasing the thermal boundary conductance (TBC).$^1$ However, recent computational works have suggested that interfacial defects can enhance this thermal boundary conductance through emergence of unique vibrations that are intrinsic to the materia…
▽ More
The role of interfacial nonidealities and disorder on thermal transport across interfaces is traditionally assumed to add resistance to heat transfer, decreasing the thermal boundary conductance (TBC).$^1$ However, recent computational works have suggested that interfacial defects can enhance this thermal boundary conductance through emergence of unique vibrations that are intrinsic to the material interface and defect atoms,$^{2-6}$ a finding that contradicts traditional theory and conventional understanding. By manipulating the local heat flux of atomic vibrations that comprise these interfacial modes, in principle, the TBC can be increased. In this work, we provide evidence that interfacial defects can enhance the TBC across interfaces through the emergence of unique high frequency vibrational modes that arise from atomic mass defects at the interface with relatively small masses. We demonstrate ultrahigh TBC at amorphous SiOC:H/SiC:H interfaces, approaching 1 GW m$^{-2}$ K$^{-1}$, that is further increased through the introduction of nitrogen defects. The fact that disordered interfaces can exhibit such high conductances, which can be further increased with additional defects offers a unique direction in controlling interfacial thermal transport that becomes important in manipulating heat transfer across materials with high densities of interfaces.
△ Less
Submitted 25 October, 2017;
originally announced October 2017.
-
Relation between Lacunarity, Correlation dimension and Euclidean dimension of Systems
Authors:
Abhra Giri,
Sujata Tarafdar,
Tapati Dutta
Abstract:
Lacunarity is a measure often used to quantify the lack of translational invariance present in fractals and multifractal systems. The generalised dimensions, specially the first three, are also often used to describe various aspects of mass distribution in such systems. In this work we establish that the graph (\textit{lacunarity curve}) depicting the variation of lacunarity with scaling size, is…
▽ More
Lacunarity is a measure often used to quantify the lack of translational invariance present in fractals and multifractal systems. The generalised dimensions, specially the first three, are also often used to describe various aspects of mass distribution in such systems. In this work we establish that the graph (\textit{lacunarity curve}) depicting the variation of lacunarity with scaling size, is non-linear in multifractal systems. We propose a generalised relation between the Euclidean dimension, the Correlation Dimension and the lacunarity of a system that lacks translational invariance, through the slope of the lacunarity curve. Starting from the basic definitions of these measures and using statistical mechanics, we track the standard algorithms- the box counting algorithm for the determination of the generalised dimensions, and the gliding box algorithm for lacunarity, to establish this relation. We go on to validate the relation on six systems, three of which are deterministically determined, while three others are real. Our examples span 2- and 3- dimensional systems, and euclidean, monofractal and multifractal geometries. We first determine the lacunarity of these systems using the gliding box algorithm. In each of the six cases studied, the euclidean dimension, the correlation dimension in case of multifractals, and the lacunarity of the system, together, yield a value of the slope $S$ of the lacunarity curve at any length scale. The predicted $S$ value matches the slope as determined from the actual plot of the lacunarity curves at the corresponding length scales. This establishes that the relation holds for systems of any geometry or dimension.
△ Less
Submitted 18 February, 2016;
originally announced February 2016.
-
Electrical Impedance Response of Gamma Irradiated Gelatin based Solid Polymer Electrolytes Analyzed Using a Generalized Calculus Formalism
Authors:
Tania Basu,
Abhra Giri,
Sujata Tarafdar,
Shantanu Das
Abstract:
The electrical impedance response of Gelatin based solid polymer electrolyte to gamma irradiation is investigated by impedance spectroscopy. An analysis based on Poisson-Nernst-Plank model, incorporating fractional time derivatives is carried out. A detailed derivation for anomalous impedance function is given.The model involves boundary conditions with convolution of the fractional time derivativ…
▽ More
The electrical impedance response of Gelatin based solid polymer electrolyte to gamma irradiation is investigated by impedance spectroscopy. An analysis based on Poisson-Nernst-Plank model, incorporating fractional time derivatives is carried out. A detailed derivation for anomalous impedance function is given.The model involves boundary conditions with convolution of the fractional time derivative of ion density and adsorption desorption relaxation kinetics. A fractional diffusion-drift equation is used to solve the bulk behavior of the mobile charges in the electrolyte. The complex adsorption-desorption process at the electrode-electrolyte interface produces an anomalous effect in the system. The model gives a very good fit for the observed impedance data for this biopolymer based solid electrolyte in wide range of frequencies. We have compared different parameters based upon this model for both irradiated and unirradiated samples.
△ Less
Submitted 24 March, 2015;
originally announced March 2015.
-
Modality of Equilibration in Non-equilibrium Systems
Authors:
P. Barat,
A. Giri,
Nilangshu K. Das,
M. Bhattacharya,
A. Dutta
Abstract:
An open question in the field of non-equilibrium statistical physics is whether there exists a unique way through which non-equilibrium systems equilibrate irrespective of how far they are away from equilibrium. To answer this question we have generated non-equilibrium states of various types of systems by molecular dynamics simulation technique. We have used a statistical method called system ide…
▽ More
An open question in the field of non-equilibrium statistical physics is whether there exists a unique way through which non-equilibrium systems equilibrate irrespective of how far they are away from equilibrium. To answer this question we have generated non-equilibrium states of various types of systems by molecular dynamics simulation technique. We have used a statistical method called system identification technique to understand the dynamical process of equilibration in reduced dimensional space. In this paper, we have tried to establish that the process of equilibration is unique.
△ Less
Submitted 13 March, 2014;
originally announced March 2014.
-
Oscillatory Shannon Entropy in the Process of Equilibration of Nonequilibrium Systems
Authors:
A. Giri,
Nilangshu K. Das,
P. Barat
Abstract:
We present a study of the equilibration process of nonequilibrium systems by means of molecular dynamics simulation technique. The nonequilibrium conditions are achieved in systems by defining velocity components of the constituent atoms randomly. The calculated Shannon en- tropy from the probability distribution of the kinetic energy among the atoms at different instants during the process of equ…
▽ More
We present a study of the equilibration process of nonequilibrium systems by means of molecular dynamics simulation technique. The nonequilibrium conditions are achieved in systems by defining velocity components of the constituent atoms randomly. The calculated Shannon en- tropy from the probability distribution of the kinetic energy among the atoms at different instants during the process of equilibration shows oscillation as the system relaxes towards equilibrium. Fourier transformations of these oscillating Shannon entropies reveal the existance of Debye frequency of the concerned system. From these studies it was concluded that the signature of the equilibration process of dynamical systems is the time invariance of Shannon entropy.
△ Less
Submitted 31 January, 2014;
originally announced January 2014.
-
Universal Scaling Property of System Approaching Equilibrium
Authors:
P. Barat,
A. Giri,
M. Bhattacharya,
Nilangshu K. Das,
A. Dutta
Abstract:
In this Letter we show that the diffusion kinetics of kinetic energy among the atoms in non- equilibrium crystalline systems follows universal scaling relation and obey Levy-walk properties. This scaling relation is found to be valid for systems no matter how far they are driven out of equilibrium.
In this Letter we show that the diffusion kinetics of kinetic energy among the atoms in non- equilibrium crystalline systems follows universal scaling relation and obey Levy-walk properties. This scaling relation is found to be valid for systems no matter how far they are driven out of equilibrium.
△ Less
Submitted 24 December, 2013; v1 submitted 21 September, 2013;
originally announced September 2013.
-
Multifractal analysis of the pore space of real and simulated sedimentary rocks
Authors:
Abhra Giri,
Sujata Tarafdar,
Philippe Gouze,
Tapati Dutta
Abstract:
It is well known that sedimentary rocks having same porosity can have very different pore size distribution. The pore distribution determines many characteristics of the rock among which, its transport property is often the most useful. Multifractal analysis is a powerful tool that is increasingly used to characterize the pore space. In this study we have done multifractal analysis of pore distrib…
▽ More
It is well known that sedimentary rocks having same porosity can have very different pore size distribution. The pore distribution determines many characteristics of the rock among which, its transport property is often the most useful. Multifractal analysis is a powerful tool that is increasingly used to characterize the pore space. In this study we have done multifractal analysis of pore distribution on sedimentary rocks simulated using the Relaxed Bidisperse Ballistic Model (RBBDM). The RBBDM can generate a $3-D$ structure of sedimentary rocks of variable porosity by tuning the fraction $p$ of particles of two different sizes. We have also done multifractal analysis on two samples of real sedimentary rock to compare with the simulation studies. One sample, an oolitic limestone is of high porosity (40%)while the other is a reefal carbonate of low porosity around 7%. $2-D$ sections of X-ray micro-tomographs of the real rocks were stacked sequentially to reconstruct the real rock specimens. Both samples show a multifractal character, but we show that RBBDM gives a very realistic representation of a typical high porosity sedimentary rock.
△ Less
Submitted 3 February, 2013;
originally announced February 2013.
