Showing 1–50 of 111 results for author: Fu, C

Frequency-resolved Raman Thermometry Analysis via a Multi-layer Heat Transfer Model for Bulk and Low-dimensional Materials

Authors: Taocheng Yu, Yilu Fu, Chenguang Fu, Tiejun Zhu, Wee-Liat Ong

Abstract: Raman thermometry is advantageous for measuring the thermal transport of low-dimensional materials due to its non-contact nature. Transient Raman methods have improved the accuracy of steady-state Raman thermometry by removing the need for accurate temperature calibration and laser absorption evaluation. However, current methods often resort to finite element analysis (FEA) to decipher the measure… ▽ More Raman thermometry is advantageous for measuring the thermal transport of low-dimensional materials due to its non-contact nature. Transient Raman methods have improved the accuracy of steady-state Raman thermometry by removing the need for accurate temperature calibration and laser absorption evaluation. However, current methods often resort to finite element analysis (FEA) to decipher the measured signals. This step is time-consuming and impedes its ubiquitous adaptation. In this work, we replace the FEA by fitting the transient-state Raman signal to a three-dimensional (3D) analytical heat transfer model for measuring the thermal conductivity of two bulk layered materials [i.e., molybdenum disulfide (MoS2) and bismuth selenide (Bi2Se3) crystals] and the interfacial thermal conductance (h) of CVD-grown MoS2 and molybdenum di-selenide (MoSe2) on quartz (SiO2). Our measured results agree reasonably well with literature and theoretical calculations. We also performed a quantitative sensitivity analysis to give insights on how to improve the measurement sensitivity. Our work provides an efficient way to process the data of transient-based Raman thermometry for high throughput measurements. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Size effect on the structural and magnetic phase transformations of iron nanoparticles

Authors: Alexis Front, Georg Daniel Förster, Chu-Chun Fu, Cyrille Barreteau, Hakim Amara

Abstract: Iron nanoparticles are among the most promising low-dimensional materials in terms of applications. This particularity is attributable to the magnetic properties of these nanoparticles, which exhibit different allotropes as a function of temperature. In this work, we sought to characterise at the atomic scale how their structural and magnetic transformations can be affected by the size. To achieve… ▽ More Iron nanoparticles are among the most promising low-dimensional materials in terms of applications. This particularity is attributable to the magnetic properties of these nanoparticles, which exhibit different allotropes as a function of temperature. In this work, we sought to characterise at the atomic scale how their structural and magnetic transformations can be affected by the size. To achieve this objective, we developed a tight-binding model incorporating a magnetic contribution via a Stoner term implemented in a Monte Carlo code to relax the structure and the magnetic state. Using our approach, we show that magnetism is strongly reinforced by the surface, which leads to increase the Curie temperature as the size of the particle decreases contrary to the solid-solid transition temperature. Our work thus provides a deep understanding at the atomic scale of the key factors that determines the structural and magnetic properties of Fe nanoparticles, shedding more light on their unique character which is crucial for further applications. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Anomalous Neutron Nuclear-Magnetic Interference Spectroscopy

Authors: Chuliang Fu, Phum Siriviboon, Artittaya Boonkird, Michael Landry, Chen Li, Weiwei Xie, Mingda Li

Abstract: The electron-phonon interaction plays a critical role in materials electrical, thermal, optical, and superconducting properties. However, measuring the phonon mode-resolved electron-phonon interaction has been challenging. Here we propose neutron-scattering-based Anomalous Neutron nUclear-Magnetic Interference Spectroscopy (ANUBIS), where the co-existence of neutron nuclear scattering and magnetic… ▽ More The electron-phonon interaction plays a critical role in materials electrical, thermal, optical, and superconducting properties. However, measuring the phonon mode-resolved electron-phonon interaction has been challenging. Here we propose neutron-scattering-based Anomalous Neutron nUclear-Magnetic Interference Spectroscopy (ANUBIS), where the co-existence of neutron nuclear scattering and magnetic scattering leads to anomalous dynamical structure factor under the presence of the electron-phonon interaction. Such anomalous structure factor is linear in electron-phonon coupling constant at the phonon wavevector, and is directly proportional to the momentum and energy-resolved dielectric function. The experimental configuration can be achieved using existing polarized inelastic neutron scattering setup, and an order-of-magnitude estimate shows the viability to observe the anomalous scattering signal is around $10^{-4}$ to $10^{-3}$ relative to phonon scattering, which is achievable at emerging neutron facilities. Our proposal offers an alternative neutron-based metrology to probe the crucial electronic properties. △ Less

Submitted 20 March, 2024; originally announced March 2024.

Comments: 7 pages, 3 figures

Complete and Efficient Graph Transformers for Crystal Material Property Prediction

Authors: Keqiang Yan, Cong Fu, Xiaofeng Qian, Xiaoning Qian, Shuiwang Ji

Abstract: Crystal structures are characterized by atomic bases within a primitive unit cell that repeats along a regular lattice throughout 3D space. The periodic and infinite nature of crystals poses unique challenges for geometric graph representation learning. Specifically, constructing graphs that effectively capture the complete geometric information of crystals and handle chiral crystals remains an un… ▽ More Crystal structures are characterized by atomic bases within a primitive unit cell that repeats along a regular lattice throughout 3D space. The periodic and infinite nature of crystals poses unique challenges for geometric graph representation learning. Specifically, constructing graphs that effectively capture the complete geometric information of crystals and handle chiral crystals remains an unsolved and challenging problem. In this paper, we introduce a novel approach that utilizes the periodic patterns of unit cells to establish the lattice-based representation for each atom, enabling efficient and expressive graph representations of crystals. Furthermore, we propose ComFormer, a SE(3) transformer designed specifically for crystalline materials. ComFormer includes two variants; namely, iComFormer that employs invariant geometric descriptors of Euclidean distances and angles, and eComFormer that utilizes equivariant vector representations. Experimental results demonstrate the state-of-the-art predictive accuracy of ComFormer variants on various tasks across three widely-used crystal benchmarks. Our code is publicly available as part of the AIRS library (https://github.com/divelab/AIRS). △ Less

Submitted 18 March, 2024; originally announced March 2024.

Comments: This paper has been accepted by ICLR 2024

Epitaxial rare-earth doped complex oxide thin films for infrared applications

Authors: Mythili Surendran, Joshua Rollag, Christopher E. Stevens, Ching-Tai Fu, Harish Kumarasubramanian, Zhe Wang, Darrell G. Schlom, Ricky Gibson, Joshua R. Hendrickson, Jayakanth Ravichandran

Abstract: Rare earth dopants are one of the most extensively studied optical emission centers for a broad range of applications such as laser optoelectronics, sensing, lighting, and quantum information technologies due to their narrow optical linewidth and exceptional coherence properties. Epitaxial doped oxide thin films can serve as a promising and controlled host to investigate rare-earth dopants suitabl… ▽ More Rare earth dopants are one of the most extensively studied optical emission centers for a broad range of applications such as laser optoelectronics, sensing, lighting, and quantum information technologies due to their narrow optical linewidth and exceptional coherence properties. Epitaxial doped oxide thin films can serve as a promising and controlled host to investigate rare-earth dopants suitable for scalable quantum memories, on-chip lasers and amplifiers. Here, we report high-quality epitaxial thin films of Tm-doped CaZrO$_3$ grown by pulsed laser deposition for infrared optoelectronic and quantum memory applications. We perform extensive structural and chemical characterization to probe the crystallinity of the films and the do** behavior. Low temperature photoluminescence measurements show sharp radiative transitions in the short-wave infrared range of 1.75 - 2 μm. △ Less

Submitted 19 February, 2024; originally announced February 2024.

Comments: 17 pages, 4 figures

Isolation of Single Donors in ZnO

Authors: Ethan R. Hansen, Vasileios Niaouris, Bethany E. Matthews, Christian Zimmermann, Xingyi Wang, Roman Kolodka, Lasse Vines, Steven R. Spurgeon, Kai-Mei C. Fu

Abstract: The shallow donor in zinc oxide (ZnO) is a promising semiconductor spin qubit with optical access. Single indium donors are isolated in a commercial ZnO substrate using plasma focused ion beam (PFIB) milling. Quantum emitters are identified optically by spatial and frequency filtering. The indium donor assignment is based on the optical bound exciton transition energy and magnetic dependence. The… ▽ More The shallow donor in zinc oxide (ZnO) is a promising semiconductor spin qubit with optical access. Single indium donors are isolated in a commercial ZnO substrate using plasma focused ion beam (PFIB) milling. Quantum emitters are identified optically by spatial and frequency filtering. The indium donor assignment is based on the optical bound exciton transition energy and magnetic dependence. The single donor emission is intensity and frequency stable with a transition linewidth less than twice the lifetime limit. The isolation of optically stable single donors post-FIB fabrication is promising for optical device integration required for scalable quantum technologies based on single donors in direct band gap semiconductors. △ Less

Submitted 17 January, 2024; v1 submitted 9 October, 2023; originally announced October 2023.

Comments: E. R. Hansen and V. Niaouris contributed equally to this work. 15 pages, 13 figures

Evolution of Maximum Bending Strain on Poisson's Ratio Distribution

Authors: Yang Li, Le Zhang, Dehua Wang, Limei Hou, Shanmei Du, Yang Deng, Yanfeng Du, Yingfei Xin, Chongyang Fu, Yan Gu, Xiaoxiong Wang

Abstract: In recent years, new flexible functional materials have attracted increasing interest, but there is a lack of the designing mechanisms of flexibility design with superstructures. In traditional engineering mechanics, the maximum bending strain (MBS) was considered universal for describing the bendable properties of a given material, leading to the universal designing method of lowering the dimensi… ▽ More In recent years, new flexible functional materials have attracted increasing interest, but there is a lack of the designing mechanisms of flexibility design with superstructures. In traditional engineering mechanics, the maximum bending strain (MBS) was considered universal for describing the bendable properties of a given material, leading to the universal designing method of lowering the dimension such as thin membranes designed flexible functional materials.In this work, the MBS was found only applicable for materials with uniformly distributed Poisson's ratio, while the MBS increases with the thickness of the given material in case there is a variation Poisson's ratio in different areas. This means the MBS can be enhanced by certain Poisson's ratio design in the future to achieve better flexibility of thick materials. Here, the inorganic freestanding nanofiber membranes, which have a nonconstant Poisson's ratio response on stress/strain for creating nonuniformly distributed Poisson's ratio were proven applicable for designing larger MBS and lower Young's modulus for thicker samples. △ Less

Submitted 4 September, 2023; originally announced September 2023.

Contributions to the optical linewidth of shallow donor-bound excitonic transition in ZnO

Authors: Vasileios Niaouris, Samuel H. D'Ambrosia, Christian Zimmermann, Xingyi Wang, Ethan R. Hansen, Michael Titze, Edward S. Bielejec, Kai-Mei C. Fu

Abstract: Neutral shallow donors in zinc oxide (ZnO) are spin qubits with optical access via the donor-bound exciton. This spin-photon interface enables applications in quantum networking, memories and transduction. Essential optical parameters which impact the spin-photon interface include radiative lifetime, optical inhomogeneous and homogeneous linewidth and optical depth. We study the donor-bound excito… ▽ More Neutral shallow donors in zinc oxide (ZnO) are spin qubits with optical access via the donor-bound exciton. This spin-photon interface enables applications in quantum networking, memories and transduction. Essential optical parameters which impact the spin-photon interface include radiative lifetime, optical inhomogeneous and homogeneous linewidth and optical depth. We study the donor-bound exciton optical linewidth properties of Al, Ga, and In donors in single-crystal ZnO. The ensemble photoluminescence linewidth ranges from 4-11 GHz, less than two orders of magnitude larger than the expected lifetime-limited linewidth. The ensemble linewidth remains narrow in absorption through samples with an estimated optical depth up to several hundred. The primary thermal relaxation mechanism is identified and found to have a negligible contribution to the total linewidth at 2 K. We find that inhomogeneous broadening due to the disordered isotopic environment in natural ZnO is significant, contributing 2 GHz. Two-laser spectral hole burning measurements, indicate the dominant mechanism, however, is homogeneous. Despite this broadening, the high homogeneity, large optical depth and potential for isotope purification indicate that the optical properties of the ZnO donor-bound exciton are promising for a wide range of quantum technologies and motivate a need to improve the isotope and chemical purity of ZnO for quantum technologies. △ Less

Submitted 17 January, 2024; v1 submitted 24 July, 2023; originally announced July 2023.

Comments: V. Niaouris and S. H. D'Ambrosia contributed equally to this work, 24 pages, 12 figures

Journal ref: Optica Quantum 2, 7-13 (2024)

A Cluster-Based Computational Thermodynamics Framework with Intrinsic Chemical Short-Range Order: Part I. Configurational Contribution

Authors: Chu-Liang Fu, Rajendra Prasad Gorrey, Bi-Cheng Zhou

Abstract: Exploiting Chemical Short-Range Order (CSRO) is a promising avenue for manipulating the properties of alloys. However, existing modeling frameworks are not sufficient to predict CSRO in multicomponent alloys (>3 components) in an efficient and reliable manner. In this work, we developed a hybrid computational thermodynamics framework by combining unique advantages from Cluster Variation Method (CV… ▽ More Exploiting Chemical Short-Range Order (CSRO) is a promising avenue for manipulating the properties of alloys. However, existing modeling frameworks are not sufficient to predict CSRO in multicomponent alloys (>3 components) in an efficient and reliable manner. In this work, we developed a hybrid computational thermodynamics framework by combining unique advantages from Cluster Variation Method (CVM) and CALculation of PHAse Diagram (CALPHAD) method. The key is to decompose the cumbersome cluster variables in CVM into fewer site variables of the basic cluster using the Fowler-Yang-Li (FYL) transform, which considerably reduces the number of variables that must be minimized for multicomponent systems. CSRO is incorporated into CALPHAD with a novel cluster-based solution model called FYL-CVM. This new framework brings more physics into CALPHAD while maintaining its practicality and achieves a good balance between accuracy and computational cost. It leverages statistical mechanics to yield a more physical description of configurational entropy and opens the door to cluster-based CALPHAD database development. The application of the FYL-CVM model in a prototype fcc AB alloy demonstrates its capability to correctly reproduce the essential features of the phase diagram and thermodynamic properties. The hybrid CVM-CALPHAD framework represents a new methodology for thermodynamic modeling that enables atomic-scale order to be exploited for materials design. △ Less

Submitted 14 February, 2024; v1 submitted 27 June, 2023; originally announced June 2023.

Giant phonon softening and avoided crossing in aliovalence-doped heavy-band thermoelectrics

Authors: Shen Han, Shengnan Dai, Jie Ma, Qingyong Ren, Chaoliang Hu, Ziheng Gao, Manh Duc Le, Denis Sheptyakov, ** Miao, Shuki Torii, Takashi Kamiyama, Claudia Felser, Jiong Yang, Chenguang Fu, Tiejun Zhu

Abstract: Aliovalent do** has been adopted to optimize the electrical properties of semiconductors, while its impact on the phonon structure and propagation is seldom paid proper attention to. This work reveals that aliovalent do** can be much more effective in reducing the lattice thermal conductivity of thermoelectric semiconductors than the commonly employed isoelectronic alloying strategy. As demons… ▽ More Aliovalent do** has been adopted to optimize the electrical properties of semiconductors, while its impact on the phonon structure and propagation is seldom paid proper attention to. This work reveals that aliovalent do** can be much more effective in reducing the lattice thermal conductivity of thermoelectric semiconductors than the commonly employed isoelectronic alloying strategy. As demonstrated in the heavy-band NbFeSb system, a large reduction of 65% in the lattice thermal conductivity is achieved through only 10% aliovalent Hf-do**, compared to the 4 times higher isoelectronic Ta-alloying. It is elucidated that aliovalent do** introduces free charge carriers and enhances the screening, leading to the giant softening and deceleration of optical phonons. Moreover, the heavy dopant can induce the avoided-crossing of acoustic and optical phonon branches, further decelerating the acoustic phonons. These results highlight the significant role of aliovalent dopants in regulating the phonon structure and suppressing the phonon propagation of semiconductors. △ Less

Submitted 20 March, 2023; originally announced March 2023.

Non-Local Phononic Crystals for Dispersion Customization and Undulation-point Dynamics

Authors: Arash Kazemi, Kshiteej J. Deshmukh, Fei Chen, Yunya Liu, Bolei Deng, Henry Chien Fu, Pai Wang

Abstract: Dispersion relations govern wave behaviors, and tailoring them is a grand challenge in wave manipulation. We demonstrate inverse design of phononic dispersion using non-local interactions on one-dimensional spring-mass chains. For both single-band and double-band cases, we can achieve any valid dispersion curves with analytical precision. We further employ our method to design phononic crystals wi… ▽ More Dispersion relations govern wave behaviors, and tailoring them is a grand challenge in wave manipulation. We demonstrate inverse design of phononic dispersion using non-local interactions on one-dimensional spring-mass chains. For both single-band and double-band cases, we can achieve any valid dispersion curves with analytical precision. We further employ our method to design phononic crystals with multiple ordinary (roton/maxon) and higher-order (undulation) critical points and investigate their wave packet dynamics. △ Less

Submitted 1 February, 2023; originally announced February 2023.

Journal ref: Phys. Rev. Lett. 131, 176101 (2023)

Enhanced piezoelectric response of AlN via alloying of transitional metals, and influence of type and distribution of transition metals

Authors: Xian-Hu Zha, Xiufang Ma, **g-Ting Luo, Chen Fu

Abstract: Aluminum nitride (AlN) is an important piezoelectric material for a wide range of applications, many efforts are devoted to improving its piezoelectric response by alloying with transition metals (TMs). In this paper, the influence of the type and distribution of TM on the piezoelectric response is discussed for the first time. TM0.0625Al0.9375N with twenty-eight different TMs are investigated, an… ▽ More Aluminum nitride (AlN) is an important piezoelectric material for a wide range of applications, many efforts are devoted to improving its piezoelectric response by alloying with transition metals (TMs). In this paper, the influence of the type and distribution of TM on the piezoelectric response is discussed for the first time. TM0.0625Al0.9375N with twenty-eight different TMs are investigated, and most show higher values of piezoelectric strain modulus d33 than that of AlN. This is because the TM introduces weaker TM-N bonds and locates closer to the centre of three neighbouring N atoms. The location of TM is determined to be significantly correlated with its group number. Alloys of TMxAl1-xN (TM=Sc, Cr, Sr, Mo, Ru and Rh) with varying x are further studied. On basis of the cost of the TMs and piezoelectric performances, the alloy with Mo is more effective in enhancing d33. A high d33 of 12.3 times that of pure AlN is realized in a metastable configuration of Mo0.167Al0.833N. The distribution of Mo plays a key role in the piezoelectric performance. A higher d33 is more likely to appear in MoxAl1-xN with more Al sublayers containing Mo atoms and with fewer dimers of Mo atoms along the z-axis. △ Less

Submitted 14 November, 2022; originally announced November 2022.

Do** as a tuning mechanism for magneto-thermoelectric effects to improve zT in polycrystalline NbP

Authors: Eleanor F. Scott, Katherine A. Schlaak, Poulomi Chakraborty, Chenguang Fu, Satya N. Guin, Safa Khodabakhsh, Ashley E. Paz y Puente, Claudia Felser, Brian Skinner, Sarah J. Watzman

Abstract: Weyl semimetals combine topological and semimetallic effects, making them candidates for interesting and effective thermoelectric transport properties. Here, we present experimental results on polycrystalline NbP, demonstrating the simultaneous existence of a large Nernst effect and a large magneto-Seebeck effect, which is typically not observed in a single material at the same temperature. We com… ▽ More Weyl semimetals combine topological and semimetallic effects, making them candidates for interesting and effective thermoelectric transport properties. Here, we present experimental results on polycrystalline NbP, demonstrating the simultaneous existence of a large Nernst effect and a large magneto-Seebeck effect, which is typically not observed in a single material at the same temperature. We compare transport results from two polycrystalline samples of NbP with previously published work, observing a shift in the temperature at which the maximum Nernst and magneto-Seebeck thermopowers occur, while still maintaining thermopowers of similar magnitude. Theoretical modeling shows how do** strongly alters both the Seebeck and Nernst magneto-thermopowers by shifting the temperature-dependent chemical potential, and the corresponding calculations provide a consistent interpretation of our results. Thus, we offer do** as a tuning mechanism for shifting magneto-thermoelectric effects to temperatures appropriate for device applications, improving zT at desirable operating temperature. Furthermore, the simultaneous presence of both a large Nernst and magneto-Seebeck thermopower is uncommon and offers unique device advantages if the thermopowers are used additively. Here, we also propose a unique thermoelectric device which would collectively harness the large Nernst and magneto-Seebeck thermopowers to greatly enhance the output and zT of conventional thermoelectric devices. △ Less

Submitted 23 November, 2022; v1 submitted 28 June, 2022; originally announced June 2022.

Comments: 32 pages, 21 figures

Fore-aft clearance controls how three-dimensional confinement affects micropropulsion

Authors: Suraj Kumar Kamarapu, Mehdi Jabbarzadeh, Henry Chien Fu

Abstract: Systems of active particles are often affected by confinement due to nearby boundaries. Recently, there has been interest in the effect of confinement by complex three dimensional geometries, as might occur in structured environments such as porous media, foams, gels, or biological tissues and ducts. The effects of confinement for particles moving along boundaries has been extensively studied, but… ▽ More Systems of active particles are often affected by confinement due to nearby boundaries. Recently, there has been interest in the effect of confinement by complex three dimensional geometries, as might occur in structured environments such as porous media, foams, gels, or biological tissues and ducts. The effects of confinement for particles moving along boundaries has been extensively studied, but in three dimensions active particles move not only parallel to boundaries, but also towards or away from boundaries. The consequences of this fore-aft clearance is less well understood. Swimmers that actively remodel their environment create an ideal situation to study the effect of clearance, since they maintain a steady clearance while translating. By numerically studying the locomotion of the bacterium Helicobacter pylori, which de-gels surrounding gastric mucus to make a co-moving pocket of fluid around itself, we show that the effect of three-dimensional confinement is controlled by clearance, rather than distance from a parallel boundary. Analytical calculations show that the effect of clearance can be understood in terms of flow structures, such as the generic pusher and puller flows of active particles, indicating that our results should apply to a wide range of confined active particles. △ Less

Submitted 16 March, 2022; originally announced April 2022.

Magnetochemical effects on phase stability and vacancy formation in fcc Fe-Ni alloys

Authors: Kangming Li, Chu-Chun Fu, Maylise Nastar, Frédéric Soisson, Mikhail Yu. Lavrentiev

Abstract: We investigate phase stability and vacancy formation in fcc Fe-Ni alloys over a broad composition-temperature range, via a density functional theory parametrized effective interaction model, which includes explicitly spin and chemical variables. On-lattice Monte Carlo simulations based on this model are used to predict the temperature evolution of the magnetochemical phase. The experimental compos… ▽ More We investigate phase stability and vacancy formation in fcc Fe-Ni alloys over a broad composition-temperature range, via a density functional theory parametrized effective interaction model, which includes explicitly spin and chemical variables. On-lattice Monte Carlo simulations based on this model are used to predict the temperature evolution of the magnetochemical phase. The experimental composition-dependent Curie and chemical order-disorder transition temperatures are successfully predicted. We point out a significant effect of chemical and magnetic orders on the magnetic and chemical transitions, respectively. The resulting phase diagram shows a magnetically driven phase separation around 10-40% Ni and 570-700 K, between ferromagnetic and paramagnetic solid solutions, in agreement with experimental observations. We compute vacancy formation magnetic free energy as a function of temperature and alloy composition. We identify opposite magnetic and chemical disordering effects on vacancy formation in the alloys with 50% and 75% Ni. We find that thermal magnetic effects on vacancy formation are much larger in concentrated Fe-Ni alloys than in fcc Fe and Ni due to a stronger magnetic interaction. △ Less

Submitted 9 March, 2022; originally announced March 2022.

Journal ref: Phys. Rev. B 106, 024106 (2022)

Surface engineering for cellulose as a boosted Layer-by-Layer assembly: excellent flame retardancy and improved durability with introduction of bio-based "molecular glue"

Authors: Can Fu, Xiaoli Xu, Guang-Zhong Yin, Baoyun Xu, **yang Li, Bo Ai, Zhongjie Zhai, Fei GaO, **guo Zhai, De-Yi Wang

Abstract: Layer-by-Layer (LbL) assembly was attractive as a versatile tool to address the flammability of cotton, while the washing fastness of LbL coating stayed an issue. Aiming to tackle this issue, LbL layers consisted of phenylphosphonic acid (PHA) and 3-aminopropyltriethoxysilane (APTES) was deposited on polydopamine (PDA)-coated cotton. The prepared cotton reached 31.4% of limiting oxygen index (LOI)… ▽ More Layer-by-Layer (LbL) assembly was attractive as a versatile tool to address the flammability of cotton, while the washing fastness of LbL coating stayed an issue. Aiming to tackle this issue, LbL layers consisted of phenylphosphonic acid (PHA) and 3-aminopropyltriethoxysilane (APTES) was deposited on polydopamine (PDA)-coated cotton. The prepared cotton reached 31.4% of limiting oxygen index (LOI), and extinguished immediately after removing the ignitor. Peak of heat release rate (pHRR) attenuated around 36 % compared with pure cotton. A combined barrier and quenching mechanisms were proposed. Moreover, enhanced washing durability (24.1% of LOI) was achieved even after 50 detergent laundering cycles. A facile, boosted LbL approach with proposed π-π stacking interactions between PDA abundant aromatic structures and benzene ring in PHA from LbL layers, is first to put forward to construct durable efficient flame retardant (FR) cotton. This work attempted to enlighten more thoughts and design for durable FR cotton fabrics. △ Less

Submitted 22 January, 2022; originally announced February 2022.

Simulation of thermodynamic properties of magnetic transition metals from an efficient tight-binding model

Authors: Alexis Front, Georg Förster, Van-Truong Tran, Chu-Chun Fu, Cyrille Barreteau, François Ducastelle, Hakim Amara

Abstract: Atomic scale simulations at finite temperature are an ideal approach to study the thermodynamic properties of magnetic transition metals. However, the development of interatomic potentials explicitly taking into account magnetic variables is a delicate task. In this context, we present a tight-binding model for magnetic transition metals in the Stoner approximation. This potential is integrated in… ▽ More Atomic scale simulations at finite temperature are an ideal approach to study the thermodynamic properties of magnetic transition metals. However, the development of interatomic potentials explicitly taking into account magnetic variables is a delicate task. In this context, we present a tight-binding model for magnetic transition metals in the Stoner approximation. This potential is integrated into a Monte Carlo structural relaxations code where trials of atomic displacements as well as fluctuations of local magnetic moments are performed to determine the thermodynamic equilibrium state of the considered systems. As an example, the Curie temperature of cobalt is investigated while showing the important role of atomic relaxations. Furthermore, our model is generalized to other transition metals highlighting a local magnetic moment distribution that varies with the gradual filling of the d states. Consequently, the successful validation of the potential for different magnetic configurations indicates its great transferability makes it a good choice for atomistic simulations sampling a large configuration space. △ Less

Submitted 7 December, 2021; originally announced December 2021.

Coupling between hyperbolic phonon polaritons excited in two ultrathin hBN sheets

Authors: Xiaohu Wu, Chengshuai Su, Kezhang Shi, Feng Wu, Ceji Fu

Abstract: In this work, the hyperbolic phonon polaritons (HPPs) in ultrathin hBN sheets are numerically studied. The dispersion relation and distribution of electric field are calculated to confirm the excitation of HPPs. Besides, the coupling effect between HPPs of two ultrathin hBN sheets are investigated. When the distance between two hBN sheets are smaller than the propagation length of the HPPs in the… ▽ More In this work, the hyperbolic phonon polaritons (HPPs) in ultrathin hBN sheets are numerically studied. The dispersion relation and distribution of electric field are calculated to confirm the excitation of HPPs. Besides, the coupling effect between HPPs of two ultrathin hBN sheets are investigated. When the distance between two hBN sheets are smaller than the propagation length of the HPPs in the air, the HPPs can be strongly coupled. Therefore, the photon tunneling probability can be greatly enhanced. The split of the HPPs is similar to that of the surface waves, and such phenomenon is well explained in this work. We believe that this work will deepen our understanding of the HPPs in ultrathin hyperbolic materials. In addition, the knowledge about the HPPs will help us understand the near-field radiative heat transfer between hyperbolic materials. △ Less

Submitted 1 December, 2021; originally announced December 2021.

Comments: 6 figures

Ensemble spin relaxation of shallow donor qubits in ZnO

Authors: Vasileios Niaouris, Mikhail V. Durnev, Xiayu Linpeng, Maria L. K. Viitaniemi, Christian Zimmermann, Aswin Vishnuradhan, Y. Kozuka, M. Kawasaki, Kai-Mei C. Fu

Abstract: We present an experimental and theoretical study of the longitudinal electron spin relaxation ($T_1$) of shallow donors in the direct band-gap semiconductor ZnO. $T_1$ is measured via resonant excitation of the Ga donor-bound exciton. $T_1$ exhibits an inverse-power dependence on magnetic field $T_1\propto B^{-n}$, with $4\leq n\leq 5$, over a field range of 1.75 T to 7 T. We derive an analytic ex… ▽ More We present an experimental and theoretical study of the longitudinal electron spin relaxation ($T_1$) of shallow donors in the direct band-gap semiconductor ZnO. $T_1$ is measured via resonant excitation of the Ga donor-bound exciton. $T_1$ exhibits an inverse-power dependence on magnetic field $T_1\propto B^{-n}$, with $4\leq n\leq 5$, over a field range of 1.75 T to 7 T. We derive an analytic expression for the donor spin-relaxation rate due to spin-orbit (admixture mechanism) and electron-phonon (piezoelectric) coupling for the wurtzite crystal symmetry. Excellent quantitative agreement is found between experiment and theory suggesting the admixture spin-orbit mechanism is the dominant contribution to $T_1$ in the measured magnetic field range. Temperature and excitation-energy dependent measurements indicate a donor density dependent interaction may contribute to small deviations between experiment and theory. The longest $T_1$ measured is 480 ms at 1.75 T with increasing $T_1$ at smaller fields theoretically expected. This work highlights the extremely long longitudinal spin-relaxation time for ZnO donors due to their small spin-orbit coupling. △ Less

Submitted 15 April, 2022; v1 submitted 22 November, 2021; originally announced November 2021.

Comments: 9 pages, 11 figures

Effects of magnetic excitations and transitions on vacancy formation: cases of fcc Fe and Ni compared to bcc Fe

Authors: Kangming Li, Chu-Chun Fu, Anton Schneider

Abstract: Vacancy is one of the most frequent defects in metals. We study the impacts of magnetism on vacancy formation properties in fcc Ni, and in bcc and fcc Fe, via density functional theory (DFT) and effective interaction models combined with Monte Carlo simulations. Overall, the predicted vacancy formation energies and equilibrium vacancy concentrations are in good agreement with experimental data, av… ▽ More Vacancy is one of the most frequent defects in metals. We study the impacts of magnetism on vacancy formation properties in fcc Ni, and in bcc and fcc Fe, via density functional theory (DFT) and effective interaction models combined with Monte Carlo simulations. Overall, the predicted vacancy formation energies and equilibrium vacancy concentrations are in good agreement with experimental data, available only at the high-temperature paramagnetic regime. Effects of magnetic transitions on vacancy formation energies are found to be more important in bcc Fe than in fcc Fe and Ni. The distinct behaviour is correlated to the relative roles of longitudinal and transversal spin excitations. At variance with the bcc-Fe case, we note a clear effect of longitudinal spin excitations on the magnetic free energy of vacancy formation in fcc Fe and Ni, leading to its steady variation above the respective magnetic transition temperature. Below the Néel point, such effect in fcc Fe is comparable but opposite to the one of the transversal excitations. Regarding fcc Ni, although neglecting the longitudinal spin excitations induces an overestimation of the Curie temperature by 220 K, no additional effect is visible below the Curie point. The distinct effects on the three systems are closely linked to DFT predictions of the dependence of vacancy formation energy on the variation of local magnetic-moment magnitudes and orientations. △ Less

Submitted 5 August, 2021; originally announced August 2021.

Journal ref: Phys. Rev. B 104, 104406 (2021)

Dopant-segregation to grain boundaries controls electrical conductivity of n-type NbCo(Pt)Sn half-Heusler alloy mediating thermoelectric performance

Authors: Ting Luo, Federico Serrano-Sánchez, Hanna Bishara, Siyuan Zhang, Ruben Bueno Villoro, Jimmy Jiahong Kuo, Claudia Felser, Christina Scheu, G. Jeffrey Snyder, James P. Best, Gerhard Dehm, Yuan Yu, Dierk Raabe, Chenguang Fu, Baptiste Gault

Abstract: Science-driven design of future thermoelectric materials requires a deep understanding of the fundamental relationships between microstructure and transport properties. Grain boundaries in polycrystalline materials influence the thermoelectric performance through the scattering of phonons or the trap** of electrons due to space-charge effects. Yet, the current lack of careful investigations on g… ▽ More Science-driven design of future thermoelectric materials requires a deep understanding of the fundamental relationships between microstructure and transport properties. Grain boundaries in polycrystalline materials influence the thermoelectric performance through the scattering of phonons or the trap** of electrons due to space-charge effects. Yet, the current lack of careful investigations on grain boundary-associated features hinders further optimization of properties. Here, we study n-type NbCo1-xPtxSn half-Heusler alloys, which were synthesized by ball milling and spark plasma sintering (SPS). Post-SPS annealing was performed on one sample, leading to improved low-temperature electrical conductivity. The microstructure of both samples was examined by electron microscopy and atom probe tomography. The grain size increases from ~230 nm to ~2.38 μm upon annealing. Pt is found within grains and at grain boundaries, where it locally reduces the resistivity, as assessed by in situ four-point-probe electrical conductivity measurement. Our work showcases the correlation between microstructure and electrical conductivity, providing opportunities for future microstructural optimization by tuning the chemical composition at grain boundaries. △ Less

Submitted 1 July, 2021; originally announced July 2021.

Large anomalous Hall effect in the kagome ferromagnet LiMn$_6$Sn$_6$

Authors: Dong Chen, Congcong Le, Chenguang Fu, Haicheng Lin, Walter Schnelle, Yan Sun, Claudia Felser

Abstract: Kagome magnets are believed to have numerous exotic physical properties due to the possible interplay between lattice geometry, electron correlation and band topology. Here, we report the large anomalous Hall effect in the kagome ferromagnet LiMn$_6$Sn$_6$, which has a Curie temperature of 382 K and easy plane along with the kagome lattice. At low temperatures, unsaturated positive magnetoresistan… ▽ More Kagome magnets are believed to have numerous exotic physical properties due to the possible interplay between lattice geometry, electron correlation and band topology. Here, we report the large anomalous Hall effect in the kagome ferromagnet LiMn$_6$Sn$_6$, which has a Curie temperature of 382 K and easy plane along with the kagome lattice. At low temperatures, unsaturated positive magnetoresistance and opposite signs of ordinary Hall coefficient for $ρ_{xz}$ and $ρ_{yx}$ indicate the coexistence of electrons and holes in the system. A large intrinsic anomalous Hall conductivity of 380 $Ω^{-1}$ cm$^{-1}$, or 0.44 $e^2/h$ per Mn layer, is observed in $σ_{xy}^A$. This value is significantly larger than those in other $R$Mn$_6$Sn$_6$ ($R$ = rare earth elements) kagome compounds. Band structure calculations show several band crossings, including a spin-polarized Dirac point at the K point, close to the Fermi energy. The calculated intrinsic Hall conductivity agrees well with the experimental value, and shows a maximum peak near the Fermi energy. We attribute the large anomalous Hall effect in LiMn$_6$Sn$_6$ to the band crossings closely located near the Fermi energy. △ Less

Submitted 21 June, 2021; originally announced June 2021.

Journal ref: Phys. Rev. B 103, 144410 (2021)

Large topological Hall effect in an easy-cone ferromagnet (Cr0.9B0.1)Te

Authors: Yangkun He, Johannes Kroder, Jacob Gayles, Chenguang Fu, Yu Pan, Walter Schnelle, Claudia Felser, Gerhard H. Fecher

Abstract: The Berry phase understanding of electronic properties has attracted special interest in condensed matter physics, leading to phenomena such as the anomalous Hall effect and the topological Hall effect. A non-vanishing Berry phase, induced in momentum space by the band structure or in real space by a non-coplanar spin structure, is the origin of both effects. Here, we report a sign conversion of t… ▽ More The Berry phase understanding of electronic properties has attracted special interest in condensed matter physics, leading to phenomena such as the anomalous Hall effect and the topological Hall effect. A non-vanishing Berry phase, induced in momentum space by the band structure or in real space by a non-coplanar spin structure, is the origin of both effects. Here, we report a sign conversion of the anomalous Hall effect and a large topological Hall effect in (Cr0.9B0.1)Te single crystals. The spin reorientation from an easy-axis structure at high temperature to an easy-cone structure below 140 K leads to conversion of the Berry curvature, which influences both, anomalous and topological, Hall effects in the presence of an applied magnetic field and current. We compare and summarize the topological Hall effect in four categories with different mechanisms and have a discussion into the possible artificial fake effect of topological Hall effect in polycrystalline samples, which provides a deep understanding of the relation between spin structure and Hall properties. △ Less

Submitted 21 June, 2021; originally announced June 2021.

Comments: 4 figures, 1 table

Journal ref: Appl. Phys. Lett. 117, 052409 (2020)

Impact of magnetism on screw dislocations in body-centered cubic chromium

Authors: Baptiste Bienvenu, Chu Fu, Emmanuel Clouet

Abstract: The influence of magnetism on the properties of screw dislocations in body-centered cubic chromium is investigated by means of ab initio calculations. Screw dislocations having Burgers vectors 1/2 111 and 100 are considered, following experimental observations showing activity for both slip systems. At low temperature, chromium has a magnetic order close to antiferromagnetism along 100 directions,… ▽ More The influence of magnetism on the properties of screw dislocations in body-centered cubic chromium is investigated by means of ab initio calculations. Screw dislocations having Burgers vectors 1/2 111 and 100 are considered, following experimental observations showing activity for both slip systems. At low temperature, chromium has a magnetic order close to antiferromagnetism along 100 directions, for which 1/2 111 is not a periodicity vector. Hence, dislocations with Burgers vectors 1/2 111 generate magnetic faults when shearing the crystal, which constrain them to coexist and move pairwise, leading to dissociated 111 super-dislocations. On the other side, 100 is a periodicity vector of the magnetic order of chromium, and no such magnetic fault are generated when 100 dislocations glide. Dislocation properties are computed in the magnetically ordered and non magnetic phases of chromium for comparison purposes. We report a marginal impact of magnetism on the structural properties and energies of dislocations for both slip systems. The Peierls energy barrier opposing dislocation glide in {110} planes is comparable for both 1/2 111 {110} and 100 {110} slip systems, with lower Peierls stresses in the magnetically ordered phase of chromium. △ Less

Submitted 20 May, 2021; originally announced May 2021.

Journal ref: Acta Materialia, Elsevier, 2020, 200, pp.570-580

Impact of surface and laser-induced noise on the spectral stability of implanted nitrogen-vacancy centers in diamond

Authors: Srivatsa Chakravarthi, Christian Pederson, Zeeshawn Kazi, Andrew Ivanov, Kai-Mei C. Fu

Abstract: Scalable realizations of quantum network technologies utilizing the nitrogen vacancy center in diamond require creation of optically coherent NV centers in close proximity to a surface for coupling to optical structures. We create single NV centers by $^{15}$N ion implantation and high-temperature vacuum annealing. Origin of the NV centers is established by optically detected magnetic resonance sp… ▽ More Scalable realizations of quantum network technologies utilizing the nitrogen vacancy center in diamond require creation of optically coherent NV centers in close proximity to a surface for coupling to optical structures. We create single NV centers by $^{15}$N ion implantation and high-temperature vacuum annealing. Origin of the NV centers is established by optically detected magnetic resonance spectroscopy for nitrogen isotope identification. Near lifetime-limited optical linewidths ($<$ 60 MHz) are observed for the majority of the normal-implant (7$^\circ$, $\approx$ 100 nm deep) $^{15}$NV centers. Long-term stability of the NV$^-$ charge state and emission frequency is demonstrated. The effect of NV-surface interaction is investigated by varying the implantation angle for a fixed ion-energy, and thus lattice damage profile. In contrast to the normal implant condition, NVs from an oblique-implant (85$^\circ$, $\approx$ 20 nm deep) exhibit substantially reduced optical coherence. Our results imply that the surface is a larger source of perturbation than implantation damage for shallow implanted NVs. This work supports the viability of ion implantation for formation of optically stable NV centers. However, careful surface preparation will be necessary for scalable defect engineering. △ Less

Submitted 6 August, 2021; v1 submitted 19 May, 2021; originally announced May 2021.

Comments: 8 pages, 6 figures, 1 table

Journal ref: Phys. Rev. B 104, 085425 (2021)

Highly efficient BiVO4 single-crystal nanosheets with dual modification: phosphorus do** and selective Ag modification

Authors: Can Fu, Baoyun Xu, Lingling Dong, **guo Zhai, Xuefei Wang, De-Yi Wang

Abstract: BiVO4, a visible-light response photocatalyst, has shown tremendous potential because of abundant raw material sources, good stability and low cost. There exist some limitations for further applicaitions due to poor capability to separate electron-hole pairs. In fact, a single-component modification strategy is barely adequate to obtain highy efficient photocatalytic performance. In this work, P s… ▽ More BiVO4, a visible-light response photocatalyst, has shown tremendous potential because of abundant raw material sources, good stability and low cost. There exist some limitations for further applicaitions due to poor capability to separate electron-hole pairs. In fact, a single-component modification strategy is barely adequate to obtain highy efficient photocatalytic performance. In this work, P substituted some of the V atoms from VO4 oxoanions, namely P was doped into the V sites in the host lattice of BiVO4 by a hydrothermal route. Meanwhile, Ag as an attractive and efficient electron-cocatalyst was selectively modified on the (010) facet of BiVO4 nanosheets via facile photo-deposition. As a result, the obtained dually modified BiVO4 sheets exhibited enhanced photocatalytic degradation property of methylene blue (MB). In detail, photocatalytic rate constant (k) was 2.285 min-1g-1, which was 2.78 times higher than pristine BiVO4 nanosheets. Actually, P-do** favored the formation of O vacancies, led to more charge carriers, and facilitated photocatalytic reaction. On the other hand, metallic Ag loaded on (010) facet effectively transferred photogenerated electrons, which consequently helped electron-hole pairs separation. The present work may enlighten new thoughts for smart design and controllable synthesis of highly efficient photocatalytic materials. △ Less

Submitted 19 May, 2021; originally announced May 2021.

Spin dynamics from a constrained magnetic Tight-Binding model

Authors: Ramon Cardias, Cyrille Barreteau, Pascal Thibaudeau, Chu Chun Fu

Abstract: A dynamics of the precession of coupled atomic moments in the tight-binding (TB) approximation is presented. By implementing an angular penalty functional in the energy that captures the magnetic effective fields self-consistently, the motion of the orientation of the local magnetic moments is observed faster than the variation of their magnitudes. This allows the computation of the effective atom… ▽ More A dynamics of the precession of coupled atomic moments in the tight-binding (TB) approximation is presented. By implementing an angular penalty functional in the energy that captures the magnetic effective fields self-consistently, the motion of the orientation of the local magnetic moments is observed faster than the variation of their magnitudes. This allows the computation of the effective atomic magnetic fields that are found consistent with the Heisenberg's exchange interaction, by comparison with classical atomistic spin dynamics on Fe, Co and Ni magnetic clusters. △ Less

Submitted 28 April, 2021; v1 submitted 15 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. B 103, 235436 (2021)

Optical spin control and coherence properties of acceptor bound holes in strained GaAs

Authors: Xiayu Linpeng, Todd Karin, Mikhail V. Durnev, Mikhail M. Glazov, Rüdiger Schott, Andreas D. Wieck, Arne Ludwig, Kai-Mei C. Fu

Abstract: Hole spins in semiconductors are a potential qubit alternative to electron spins. In nuclear-spin-rich host crystals like GaAs, the hyperfine interaction of hole spins with nuclei is considerably weaker than that for electrons, leading to potentially longer coherence times. Here we demonstrate optical pum** and coherent population trap** for acceptor-bound holes in a strained GaAs epitaxial la… ▽ More Hole spins in semiconductors are a potential qubit alternative to electron spins. In nuclear-spin-rich host crystals like GaAs, the hyperfine interaction of hole spins with nuclei is considerably weaker than that for electrons, leading to potentially longer coherence times. Here we demonstrate optical pum** and coherent population trap** for acceptor-bound holes in a strained GaAs epitaxial layer. We find $μ$s-scale longitudinal spin relaxation time T$_1$ and an inhomogeneous dephasing time T$_2^*$ of $\sim$7~ns. We attribute the spin relaxation mechanism to a combination effect of a hole-phonon interaction through the deformation potentials and a heavy-hole light-hole mixing in an in-plane magnetic field. We attribute the short T$_2^*$ to g-factor broadening due to strain inhomogeneity. T$_1$ and T$_2^*$ are quantitatively calculated based on these mechanisms and compared with the experimental results. While the hyperfine-mediated decoherence is mitigated, our results highlight the important contribution of strain to relaxation and dephasing of acceptor-bound hole spins. △ Less

Submitted 13 December, 2020; originally announced December 2020.

Journal ref: Phys. Rev. B 103, 115412 (2021)

Probing topological spin structures using light-polarization and magnetic microscopy

Authors: Till Lenz, Georgios Chatzidrosos, Zhiyuan Wang, Lykourgos Bougas, Yannick Dumeige, Arne Wickenbrock, Nico Kerber, Jakub Zázvorka, Fabian Kammerbauer, Mathias Kläui, Zeeshawn Kazi, Kai-Mei C. Fu, Kohei Itoh, Hideyuki Watanabe, Dmitry Budker

Abstract: We present an imaging modality that enables detection of magnetic moments and their resulting stray magnetic fields. We use wide-field magnetic imaging that employs a diamond-based magnetometer and has combined magneto-optic detection (e.g. magneto-optic Kerr effect) capabilities. We employ such an instrument to image magnetic (stripe) domains in multilayered ferromagnetic structures. We present an imaging modality that enables detection of magnetic moments and their resulting stray magnetic fields. We use wide-field magnetic imaging that employs a diamond-based magnetometer and has combined magneto-optic detection (e.g. magneto-optic Kerr effect) capabilities. We employ such an instrument to image magnetic (stripe) domains in multilayered ferromagnetic structures. △ Less

Submitted 7 October, 2020; originally announced October 2020.

Comments: 7 pages

Journal ref: Phys. Rev. Applied 15, 024040 (2021)

New highly-anisotropic Rh-based Heusler compound for magnetic recording

Authors: Yangkun He, Gerhard H. Fecher, Chenguang Fu, Yu Pan, Kaustuv Manna, Johannes Kroder, Ajay Jha, Xiao Wang, Zhiwei Hu, Stefano Agrestini, Javier Herrero-Martin, Manuel Valvidares, Yurii Skourski, Walter Schnelle, Plamen Stamenov, Horst Borrmann, Liu Hao Tjeng, Rudolf Schaefer, S. S. P. Parkin, J. M. D. Coey, Claudia Felser

Abstract: The development of high-density magnetic recording media is limited by the superparamagnetism in very small ferromagnetic crystals. Hard magnetic materials with strong perpendicular anisotropy offer stability and high recording density. To overcome the difficulty of writing media with a large coercivity, heat assisted magnetic recording (HAMR) has been developed, rapidly heating the media to the C… ▽ More The development of high-density magnetic recording media is limited by the superparamagnetism in very small ferromagnetic crystals. Hard magnetic materials with strong perpendicular anisotropy offer stability and high recording density. To overcome the difficulty of writing media with a large coercivity, heat assisted magnetic recording (HAMR) has been developed, rapidly heating the media to the Curie temperature Tc before writing, followed by rapid cooling. Requirements are a suitable Tc, coupled with anisotropic thermal conductivity and hard magnetic properties. Here we introduce Rh2CoSb as a new hard magnet with potential for thin film magnetic recording. A magnetocrystalline anisotropy of 3.6 MJm-3 is combined with a saturation magnetization of μ0Ms = 0.52 T at 2 K (2.2 MJm-3 and 0.44 T at room-temperature). The magnetic hardness parameter of 3.7 at room temperature is the highest observed for any rare-earth free hard magnet. The anisotropy is related to an unquenched orbital moment of 0.42 μB on Co, which is hybridized with neighbouring Rh atoms with a large spin-orbit interaction. Moreover, the pronounced temperature-dependence of the anisotropy that follows from its Tc of 450 K, together with a high thermal conductivity of 20 Wm-1K-1, makes Rh2CoSb a candidate for development for heat assisted writing with a recording density in excess of 10 Tb/in2. △ Less

Submitted 2 September, 2020; originally announced September 2020.

Journal ref: Advanced Materials 2020

Ab-initio based models for temperature-dependent magneto-chemical interplay in bcc Fe-Mn alloys

Authors: Anton Schneider, Chu-Chun Fu, Osamu Waseda, Cyrille Barreteau, Tilmann Hickel

Abstract: Body-centered cubic (bcc) Fe-Mn systems are known to exhibit a complex and atypical magnetic behaviour from both experiments and 0 K electronic-structure calculations, which is due to the half-filled 3d-band of Mn. We propose effective interaction models for these alloys, which contain both atomic spin and chemical variables. They were parameterized on a set of key density functional theory (DFT)… ▽ More Body-centered cubic (bcc) Fe-Mn systems are known to exhibit a complex and atypical magnetic behaviour from both experiments and 0 K electronic-structure calculations, which is due to the half-filled 3d-band of Mn. We propose effective interaction models for these alloys, which contain both atomic spin and chemical variables. They were parameterized on a set of key density functional theory (DFT) data, with the inclusion of non-collinear magnetic configurations being indispensable. Two distinct approaches, namely a knowledge-driven and a machine-learning approach have been employed for the fitting. Employing these models in atomic Monte Carlo simulations enables the prediction of magnetic and thermodynamic properties of the Fe-Mn alloys, and their coupling, as functions of temperature. This includes the decrease of Curie temperature with increasing Mn concentration, the temperature evolution of the mixing enthalpy and its correlation with the alloy magnetization. Also, going beyond the defect-free systems, we determined the binding free energy between a vacancy and a Mn atom, which is a key parameter controlling the atomic transport in Fe-Mn alloys. △ Less

Submitted 5 August, 2020; originally announced August 2020.

Journal ref: Phys. Rev. B 103, 024421 (2021)

Growth and transport properties of Mg3X2 (X = Sb, Bi) single crystals

Authors: Jiazhan Xin, Guowei Li, Gudrun Auffermann, Horst Borrmann, Walter Schnelle, Johannes Gooth, Xinbing Zhao, Tiejun Zhu, Claudia Felser, Chenguang Fu

Abstract: The discovery of high thermoelectric performance in n-type polycrystalline Mg3(Sb,Bi)2 based Zintl compounds has ignited intensive research interest. However, some fundamental questions concerning the anisotropic transport properties and the origin of intrinsically low thermal conductivity are still elusive, requiring the investigation of single crystals. In this work, high-quality p-type Mg3Sb2 a… ▽ More The discovery of high thermoelectric performance in n-type polycrystalline Mg3(Sb,Bi)2 based Zintl compounds has ignited intensive research interest. However, some fundamental questions concerning the anisotropic transport properties and the origin of intrinsically low thermal conductivity are still elusive, requiring the investigation of single crystals. In this work, high-quality p-type Mg3Sb2 and Mg3Bi2 single crystals have been grown by using a self-flux method. The electrical resistivity \r{ho} of Mg3Bi2 single crystal displays an anisotropy with \r{ho} in-plane twice larger than out-of-plane. The low-temperature heat capacity and lattice thermal conductivity of Mg3Sb2 and Mg3Bi2 single crystals have been investigated by using the Debye-Callaway model, from which the existence of low-lying vibration mode could be concluded. Large Grüneisen parameters and strong anharmonicity are found responsible for the intrinsically low thermal conductivity. Moreover, grain boundary scattering does not contribute significantly to suppress the lattice thermal conductivity of polycrystalline Mg3Sb2. Our results provide insights into the intrinsic transport properties of Mg3X2 and could pave a way to realize enhanced thermoelectric performance in single-crystalline Mg3X2-based Zintl compounds. △ Less

Submitted 30 March, 2020; originally announced March 2020.

Journal ref: Mater. Today Phys. 7 (2018) 61-68

Large Nernst Power Factor over a Broad Temperature Range in Polycrystalline Weyl Semimetal NbP

Authors: Chenguang Fu, Satya N. Guin, Sarah J. Watzman, Guowei Li, Enke Liu, Nitesh Kumar, Vicky Süß, Walter Schnelle, Gudrun Auffermann, Chandra Shekhar, Yan Sun, Johannes Gooth, Claudia Felser

Abstract: The discovery of topological materials has provided new opportunities to exploit advanced materials for heat-to-electricity energy conversion as they share many common characteristics with thermoelectric materials. In this work, we report the magneto-thermoelectric properties and Nernst effect of the topological Weyl semimetal NbP. We find that polycrystalline, bulk NbP shows a significantly large… ▽ More The discovery of topological materials has provided new opportunities to exploit advanced materials for heat-to-electricity energy conversion as they share many common characteristics with thermoelectric materials. In this work, we report the magneto-thermoelectric properties and Nernst effect of the topological Weyl semimetal NbP. We find that polycrystalline, bulk NbP shows a significantly larger Nernst thermopower than its conventional thermopower under magnetic field. As a result, a maximum Nernst power factor of ~ 35*10-4 Wm-1K-2 is achieved at 9 T and 136 K, which is 4 times higher than its conventional power factor and is also comparable to that of state-of-the-art thermoelectrics. Moreover, the Nernst power factor maintains relatively large value over a broad temperature range. These results highlight that the enhancement of thermoelectric performance can be achieved in topological semimetals based on the Nernst effect and transverse transport. △ Less

Submitted 26 March, 2020; originally announced March 2020.

Journal ref: Energy Environ. Sci. 11 (2018) 2813-2820

In situ modification of delafossite type PdCoO2 bulk single crystal for reversible hydrogen sorption and fast hydrogen evolution

Authors: Guowei Li, Seunghyun Khim, Celesta S. Chang, Chenguang Fu, Nabhanila Nandi, Fan Li, Qun Yang, Graeme R. Blake, Stuart Parkin, Gudrun Auffermann, Yan Sun, David A. Muller, Andrew P. Mackenzie, Claudia Felser

Abstract: The observation of extraordinarily high conductivity in delafossite-type PdCoO2 is of great current interest, and there is some evidence that electrons behave like a fluid when flowing in bulk crystals of PdCoO2. Thus, this material is an ideal platform for the study of the electron transfer processes in heterogeneous reactions. Here, we report the use of bulk single crystal PdCoO2 as a promising… ▽ More The observation of extraordinarily high conductivity in delafossite-type PdCoO2 is of great current interest, and there is some evidence that electrons behave like a fluid when flowing in bulk crystals of PdCoO2. Thus, this material is an ideal platform for the study of the electron transfer processes in heterogeneous reactions. Here, we report the use of bulk single crystal PdCoO2 as a promising electrocatalyst for hydrogen evolution reactions (HERs). An overpotential of only 31 mV results in a current density of 10 mA cm^(-2), accompanied by high long-term stability. We have precisely determined that the crystal surface structure is modified after electrochemical activation with the formation of strained Pd nanoclusters in the surface layer. These nanoclusters exhibit reversible hydrogen sorption and desorption, creating more active sites for hydrogen access. The bulk PdCoO2 single crystal with ultra-high conductivity, which acts as a natural substrate for the Pd nanoclusters, provides a high-speed channel for electron transfer △ Less

Submitted 25 March, 2020; originally announced March 2020.

Synergistically creating sulfur vacancies in semimetal-supported amorphous MoS2 for efficient hydrogen evolution

Authors: Guowei Li, Chenguang Fu, Jiquan Wu, Jiancun Rao, Sz-Chian Liou, Xi** Xu, Baiqi Shao, Kai Liu, Enke Liu, Nitesh Kumar, Xianjie Liu, Mats Fahlman, Johannes Gooth, Gudrun Auffermann, Yan Sun, Claudia Felser, Baomin Zhang

Abstract: The presence of elemental vacancies in materials is inevitable according to statistical thermodynamics, which will decide the chemical and physical properties of the investigated system. However, the controlled manipulation of vacancies for specific applications is a challenge. Here we report a facile method for creating large concentrations of S vacancies in the inert basal plane of MoS2 supporte… ▽ More The presence of elemental vacancies in materials is inevitable according to statistical thermodynamics, which will decide the chemical and physical properties of the investigated system. However, the controlled manipulation of vacancies for specific applications is a challenge. Here we report a facile method for creating large concentrations of S vacancies in the inert basal plane of MoS2 supported on semimetal CoMoP2. With a small applied potential, S atoms can be removed in the form of H2S due to the optimized free energy of formation. The existence of vacancies favors electron injection from the electrode to the active site by decreasing the contact resistance. As a consequence, the activity is increased by 221 % with the vacancy-rich MoS2 as electrocatalyst for hydrogen evolution reaction (HER). A small overpotential of 75 mV is needed to deliver a current density of 10 mA cm-2, which is considered among the best values achieved for MoS2. It is envisaged that this work may provide a new strategy for utilizing the semimetal phase for structuring MoS2 into a multi-functional material. △ Less

Submitted 25 March, 2020; originally announced March 2020.

Zero-field Nernst effect in a ferromagnetic kagome-lattice Weyl-semimetal Co3Sn2S2

Authors: Satya N. Guin, Praveen Vir, Yang Zhang, Nitesh Kumar, Sarah J. Watzman, Chenguang Fu, Enke Liu, Kaustuv Manna, Walter Schnelle, Johannes Gooth, Chandra Shekhar, Yan Sun, Claudia Felser

Abstract: The discovery of magnetic topological semimetals recently attracted significant attention in the field of topology and thermoelectrics. In a thermoelectric device based on the Nernst geometry, an external magnet is required as an integral part. We report a zero-field Nernst effect in a newly discovered hard-ferromagnetic kagome-lattice Weyl-semimetal Co3Sn2S2. A maximum Nernst thermopower of 3 mic… ▽ More The discovery of magnetic topological semimetals recently attracted significant attention in the field of topology and thermoelectrics. In a thermoelectric device based on the Nernst geometry, an external magnet is required as an integral part. We report a zero-field Nernst effect in a newly discovered hard-ferromagnetic kagome-lattice Weyl-semimetal Co3Sn2S2. A maximum Nernst thermopower of 3 microvolt/K at 80 K in zero field is achieved in this magnetic Weyl-semimetal. Our results demonstrate the possibility of application of topological hard magnetic semimetals for low-power thermoelectric devices based on the Nernst effect and are thus valuable for the comprehensive understanding of transport properties in this class of materials. △ Less

Submitted 25 March, 2020; originally announced March 2020.

Journal ref: Advanced Materials 2019, 31, 1806622

Establishing the carrier scattering phase diagram for ZrNiSn-based half-Heusler thermoelectric materials

Authors: Qingyong Ren, Chenguang Fu, Qinyi Qiu, Shengnan Dai, Zheyuan Liu, Takatsugu Masuda, Shinichiro Asai, Masato Hagihala, Sanghyun Lee, Shuki Torri, Takashi Kamiyama, Lunhua He, Xin Tong, Claudia Felser, David J. Singh, Tiejun Zhu, Jiong Yang, Jie Ma

Abstract: Chemical do** is one of the most important strategies for tuning electrical properties of semiconductors, particularly thermoelectric materials. Generally, the main role of chemical do** lies in optimizing the carrier concentration, but there can potentially be other important effects. Here, we show that chemical do** plays multiple roles for both electron and phonon transport properties in… ▽ More Chemical do** is one of the most important strategies for tuning electrical properties of semiconductors, particularly thermoelectric materials. Generally, the main role of chemical do** lies in optimizing the carrier concentration, but there can potentially be other important effects. Here, we show that chemical do** plays multiple roles for both electron and phonon transport properties in half-Heusler thermoelectric materials. With ZrNiSn-based half-Heusler materials as an example, we use high-quality single and polycrystalline crystals, various probes, including electrical transport measurements, inelastic neutron scattering measurement, and first-principles calculations, to investigate the underlying electron-phonon interaction. We find that chemical do** brings strong screening effects to ionized impurities, grain boundary, and polar optical phonon scattering, but has negligible influence on lattice thermal conductivity. Furthermore, it is possible to establish a carrier scattering phase diagram, which can be used to select reasonable strategies for optimization of the thermoelectric performance. △ Less

Submitted 22 June, 2020; v1 submitted 25 March, 2020; originally announced March 2020.

Comments: 21 pages, 5 figures

Journal ref: Nature Communications 11, 3142 (2020)

A numerical method for inextensible elastic filaments in viscous fluids

Authors: Mehdi Jabbarzadeh, Henry C. Fu

Abstract: The deformations of flagella are important in the motility of single- and multi-flagellated bacteria. Existing numerical methods have treated flagella as extensible filaments with a large extensional modulus, resulting in a stiff numerical problem and long simulation times. However, flagella are nearly inextensible, so to avoid large extensional stiffness, we introduce inextensible elastic rod mod… ▽ More The deformations of flagella are important in the motility of single- and multi-flagellated bacteria. Existing numerical methods have treated flagella as extensible filaments with a large extensional modulus, resulting in a stiff numerical problem and long simulation times. However, flagella are nearly inextensible, so to avoid large extensional stiffness, we introduce inextensible elastic rod models with hydrodynamics treated by a surface distribution of regularized Stokeslets. We benchmark this new model against previously described models of extensible elastic rods with hydrodynamics treated by a centerline distribution of regularized Stokeslets and rotlets, as well as a surface distribution of regularized Stokeslets. We compare the accuracy of the inextensible model with the extensible models and illustrate for which ratios of stretching/bending stiffness (which depend on the diameter of filament) the inextensible model is accurate and more efficient. We show that our inextensible approach can be markedly more efficient than the extensible models for many biological filaments. We also compare the accuracy of the centerline distribution of the Stokeslets and rotlets to the more accurate surface distribution of Stokeslets for modeling fluid-structure interactions of filaments. △ Less

Submitted 12 March, 2020; originally announced March 2020.

Wide-field dynamic magnetic microscopy using double-double quantum driving of a diamond defect ensemble

Authors: Zeeshawn Kazi, Isaac M. Shelby, Hideyuki Watanabe, Kohei M. Itoh, Vaithiyalingam Shutthanandan, Paul A. Wiggins, Kai-Mei C. Fu

Abstract: Wide-field magnetometry can be realized by imaging the optically-detected magnetic resonance of diamond nitrogen vacancy (NV) center ensembles. However, NV ensemble inhomogeneities significantly limit the magnetic-field sensitivity of these measurements. We demonstrate a double-double quantum (DDQ) driving technique to facilitate wide-field magnetic imaging of dynamic magnetic fields at a micron s… ▽ More Wide-field magnetometry can be realized by imaging the optically-detected magnetic resonance of diamond nitrogen vacancy (NV) center ensembles. However, NV ensemble inhomogeneities significantly limit the magnetic-field sensitivity of these measurements. We demonstrate a double-double quantum (DDQ) driving technique to facilitate wide-field magnetic imaging of dynamic magnetic fields at a micron scale. DDQ imaging employs four-tone radio frequency pulses to suppress inhomogeneity-induced variations of the NV resonant response. As a proof-of-principle, we use the DDQ technique to image the dc magnetic field produced by individual magnetic-nanoparticles tethered by single DNA molecules to a diamond sensor surface. This demonstrates the efficacy of the diamond NV ensemble system in high-frame-rate magnetic microscopy, as well as single-molecule biophysics applications. △ Less

Submitted 15 January, 2021; v1 submitted 14 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. Applied 15, 054032 (2021)

Atomic diffusion in alpha-iron across the Curie point: an effcient and transferable ab-initio-based modelling approach

Authors: Anton Schneider, Chu Chun Fu, Frederic Soisson, Cyrille Barreteau

Abstract: An accurate prediction of atomic diffusion in Fe alloys is challenging due to thermal magnetic excitations and magnetic transitions. We propose an effcient approach to address these properties via Monte Carlo simulation, using ab-initio based effective interaction models. The temperature evolution of self- and Cu diffusion coeffcients in alpha-iron are successfully predicted, particularly the diff… ▽ More An accurate prediction of atomic diffusion in Fe alloys is challenging due to thermal magnetic excitations and magnetic transitions. We propose an effcient approach to address these properties via Monte Carlo simulation, using ab-initio based effective interaction models. The temperature evolution of self- and Cu diffusion coeffcients in alpha-iron are successfully predicted, particularly the diffusion acceleration around the Curie point, which requires a quantum treatment of spins. We point out a dominance of magnetic disorder over chemical effects on diffusion in the very dilute systems. △ Less

Submitted 5 August, 2020; v1 submitted 8 February, 2020; originally announced February 2020.

Journal ref: Phys. Rev. Lett. 124, 215901 (2020)

Effective interaction model for coupled magnetism and phase stability in bcc Fe-Co systems

Authors: Van-Truong Tran, Chu-Chun Fu, Anton Schneider

Abstract: We present an ab-initio-based effective interaction model (EIM) for the study of magnetism, thermodynamics, and their interplay in body-centered cubic Fe-Co alloys, with Co content from 0 to 70%. The model includes explicitly both spin and chemical variables. For the former, a Heisenberg formalism is adopted. But, the spin magnitude of each Fe atom varies according to its local chemical environmen… ▽ More We present an ab-initio-based effective interaction model (EIM) for the study of magnetism, thermodynamics, and their interplay in body-centered cubic Fe-Co alloys, with Co content from 0 to 70%. The model includes explicitly both spin and chemical variables. For the former, a Heisenberg formalism is adopted. But, the spin magnitude of each Fe atom varies according to its local chemical environment, following a simple rule determined by density functional theory (DFT) calculations. The proposed model is able to describe precisely the ground-state magneto-energetic landscape of both chemically ordered and disordered Fe-Co systems, as given by DFT and experiments. In combination with on-lattice Monte Carlo simulations, it enables an accurate prediction at finite temperatures. In particular, the Curie point and the chemical order-disorder (B2-A2) transition temperature are accurately predicted, for all the concentrations considered. A strong dependency of the chemical transition temperature on the magnetic configuration is evidenced and analyzed. We also suggest a more important effect of magnetic rather than vibrational entropy on the chemical transition. However, this transition is not affected by a commonly accessible external magnetic field. △ Less

Submitted 15 January, 2020; originally announced January 2020.

Comments: 33 pages, 14 figures, 1 table

Layer-Resolved Magnetic Proximity Effect in van der Waals Heterostructures

Authors: Ding Zhong, Kyle L. Seyler, Xiayu Linpeng, Nathan P. Wilson, Takashi Taniguchi, Kenji Watanabe, Michael A. McGuire, Kai-Mei C. Fu, Di Xiao, Wang Yao, Xiaodong Xu

Abstract: Magnetic proximity effects are crucial ingredients for engineering spintronic, superconducting, and topological phenomena in heterostructures. Such effects are highly sensitive to the interfacial electronic properties, such as electron wave function overlap and band alignment. The recent emergence of van der Waals (vdW) magnets enables the possibility of tuning proximity effects via designing hete… ▽ More Magnetic proximity effects are crucial ingredients for engineering spintronic, superconducting, and topological phenomena in heterostructures. Such effects are highly sensitive to the interfacial electronic properties, such as electron wave function overlap and band alignment. The recent emergence of van der Waals (vdW) magnets enables the possibility of tuning proximity effects via designing heterostructures with atomically clean interfaces. In particular, atomically thin CrI3 exhibits layered antiferromagnetism, where adjacent ferromagnetic monolayers are antiferromagnetically coupled. Exploiting this magnetic structure, we uncovered a layer-resolved magnetic proximity effect in heterostructures formed by monolayer WSe2 and bi/trilayer CrI3. By controlling the individual layer magnetization in CrI3 with a magnetic field, we found that the spin-dependent charge transfer between WSe2 and CrI3 is dominated by the interfacial CrI3 layer, while the proximity exchange field is highly sensitive to the layered magnetic structure as a whole. These properties enabled us to use monolayer WSe2 as a spatially sensitive magnetic sensor to map out layered antiferromagnetic domain structures at zero magnetic field as well as antiferromagnetic/ferromagnetic domains near the spin-flip transition in bilayer CrI3. Our work reveals a new way to control proximity effects and probe interfacial magnetic order via vdW engineering. △ Less

Submitted 12 January, 2020; originally announced January 2020.

Comments: to appear in Nature Nanotechnology

Changing the Phosphorus Allotrope from a Square Columnar Structure to a Planar Zigzag Nanoribbon by Increasing the Diameter of Carbon Nanotube Nanoreactors

Authors: **ying Zhang, Chengcheng Fu, Shixin Song, Hongchu Du, Dan Zhao, Hongyang Huang, Lihui Zhang, Jie Guan, Yifan Zhang, Xinluo Zhao, Chuansheng Ma, Chun-Lin Jia, David Tomanek

Abstract: Elemental phosphorus nanostructures are notorious for a large number of allotropes, which limits their usefulness as semiconductors. To limit this structural diversity, we synthesize selectively quasi-1D phosphorus nanostructures inside carbon nanotubes (CNTs) that act both as stable templates and nanoreactors. Whereas zigzag phosphorus nanoribbons form preferably in CNTs with an inner diameter ex… ▽ More Elemental phosphorus nanostructures are notorious for a large number of allotropes, which limits their usefulness as semiconductors. To limit this structural diversity, we synthesize selectively quasi-1D phosphorus nanostructures inside carbon nanotubes (CNTs) that act both as stable templates and nanoreactors. Whereas zigzag phosphorus nanoribbons form preferably in CNTs with an inner diameter exceeding 1.4 nm, a previously unknown square columnar structure of phosphorus is observed to form inside narrower nanotubes. Our findings are supported by electron microscopy and Raman spectroscopy observations as well as ab initio density functional theory calculations. Our computational results suggest that square columnar structures form preferably in CNTs with inner diameter around 1.0 nm, whereas black phosphorus nanoribbons form preferably inside CNTs with 4.1 nm inner diameter, with zigzag nanoribbons energetically favored over armchair nanoribbons. Our theoretical predictions agree with the experimental findings. △ Less

Submitted 9 January, 2020; originally announced January 2020.

Water affects morphogenesis of growing aquatic plant leaves

Authors: Fan Xu, Chenbo Fu, Yifan Yang

Abstract: Lotus leaves floating on water usually experience short-wavelength edge wrinkling that decays toward the center, while the leaves growing above water normally morph into a global bending cone shape with long rippled waves near the edge. Observations suggest that the underlying water (liquid substrate) significantly affects the morphogenesis of leaves. To understand the biophysical mechanism under… ▽ More Lotus leaves floating on water usually experience short-wavelength edge wrinkling that decays toward the center, while the leaves growing above water normally morph into a global bending cone shape with long rippled waves near the edge. Observations suggest that the underlying water (liquid substrate) significantly affects the morphogenesis of leaves. To understand the biophysical mechanism under such phenomena, we develop mathematical models that can effectively account for inhomogeneous differential growth of floating and free-standing leaves, to quantitatively predict formation and evolution of their morphology. We find, both theoretically and experimentally, that the short-wavelength buckled configuration is energetically favorable for growing membranes lying on liquid, while the global buckling shape is more preferable for suspended ones. Other influencing factors such as stem/vein, heterogeneity and dimension are also investigated. Our results provide a fundamental insight into a variety of plant morphogenesis affected by water foundation and suggest that such surface instabilities can be harnessed for morphology control of biomimetic deployable structures using substrate or edge actuation. △ Less

Submitted 7 January, 2020; originally announced January 2020.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett., 124, 038003, 2020

Diversity-Oriented Synthesis of Polymers of Intrinsic Microporosity with Explicit Solid Solvation Cages for Lithium Ions

Authors: Miranda J. Baran, Mark E. Carrington, Swagat Sahu, Artem Baskin, Junhua Song, Michael A. Baird, Simon J. Teat, Stephen M. Meckler, Chengyin Fu, David Prendergast, Brett A. Helms

Abstract: Here, we describe a diversity-oriented synthetic strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions. Lead candidate membranes featuring such ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional… ▽ More Here, we describe a diversity-oriented synthetic strategy for microporous polymer membranes from which we identified those whose FVEs serve as solid solvation cages for lithium ions. Lead candidate membranes featuring such ion solvation cages exhibited both higher ionic conductivity and higher cation transference number than control membranes where FVEs were aspecific, which indicates conventional bounds for membrane permeability and selectivity for ion transport can be overcome. Such membranes show promise as dendrite-suppressing anode-electrolyte interlayers in high-voltage lithium-metal batteries for electric mobility. △ Less

Submitted 26 December, 2019; originally announced December 2019.

Quantum Simulators: Architectures and Opportunities

Authors: Ehud Altman, Kenneth R. Brown, Giuseppe Carleo, Lincoln D. Carr, Eugene Demler, Cheng Chin, Brian DeMarco, Sophia E. Economou, Mark A. Eriksson, Kai-Mei C. Fu, Markus Greiner, Kaden R. A. Hazzard, Randall G. Hulet, Alicia J. Kollar, Benjamin L. Lev, Mikhail D. Lukin, Ruichao Ma, Xiao Mi, Shashank Misra, Christopher Monroe, Kater Murch, Zaira Nazario, Kang-Kuen Ni, Andrew C. Potter, Pedram Roushan , et al. (12 additional authors not shown)

Abstract: Quantum simulators are a promising technology on the spectrum of quantum devices from specialized quantum experiments to universal quantum computers. These quantum devices utilize entanglement and many-particle behaviors to explore and solve hard scientific, engineering, and computational problems. Rapid development over the last two decades has produced more than 300 quantum simulators in operati… ▽ More Quantum simulators are a promising technology on the spectrum of quantum devices from specialized quantum experiments to universal quantum computers. These quantum devices utilize entanglement and many-particle behaviors to explore and solve hard scientific, engineering, and computational problems. Rapid development over the last two decades has produced more than 300 quantum simulators in operation worldwide using a wide variety of experimental platforms. Recent advances in several physical architectures promise a golden age of quantum simulators ranging from highly optimized special purpose simulators to flexible programmable devices. These developments have enabled a convergence of ideas drawn from fundamental physics, computer science, and device engineering. They have strong potential to address problems of societal importance, ranging from understanding vital chemical processes, to enabling the design of new materials with enhanced performance, to solving complex computational problems. It is the position of the community, as represented by participants of the NSF workshop on "Programmable Quantum Simulators," that investment in a national quantum simulator program is a high priority in order to accelerate the progress in this field and to result in the first practical applications of quantum machines. Such a program should address two areas of emphasis: (1) support for creating quantum simulator prototypes usable by the broader scientific community, complementary to the present universal quantum computer effort in industry; and (2) support for fundamental research carried out by a blend of multi-investigator, multi-disciplinary collaborations with resources for quantum simulator software, hardware, and education. △ Less

Submitted 20 December, 2019; v1 submitted 14 December, 2019; originally announced December 2019.

Comments: 41 pages -- references and acknowledgments added in v2

Journal ref: PRX Quantum 2, 017003 (2021)

Microscopic model of stacking-fault potential and exciton wave function in GaAs

Authors: Mikhail V. Durnev, Mikhail M. Glazov, Xiayu Linpeng, Maria L. K. Viitaniemi, Bethany Matthews, Steven R. Spurgeon, P. V. Sushko, Andreas D. Wieck, Arne Ludwig, Kai-Mei C. Fu

Abstract: Two-dimensional stacking fault defects embedded in a bulk crystal can provide a homogeneous trap** potential for carriers and excitons. Here we utilize state-of-the-art structural imaging coupled with density functional and effective-mass theory to build a microscopic model of the stacking-fault exciton. The diamagnetic shift and exciton dipole moment at different magnetic fields are calculated… ▽ More Two-dimensional stacking fault defects embedded in a bulk crystal can provide a homogeneous trap** potential for carriers and excitons. Here we utilize state-of-the-art structural imaging coupled with density functional and effective-mass theory to build a microscopic model of the stacking-fault exciton. The diamagnetic shift and exciton dipole moment at different magnetic fields are calculated and compared with the experimental photoluminescence of excitons bound to a single stacking fault in GaAs. The model is used to further provide insight into the properties of excitons bound to the double-well potential formed by stacking fault pairs. This microscopic exciton model can be used as an input into models which include exciton-exciton interactions to determine the excitonic phases accessible in this system. △ Less

Submitted 1 November, 2019; originally announced November 2019.

Comments: 12 pages, 10 figures

Journal ref: Phys. Rev. B 101, 125420 (2020)

Surface states in bulk single crystal of topological semimetal Co$_3$Sn$_2$S$_2$ towards water oxidation

Authors: Guowei Li, Qiunan Xu, Wujun Shi, Chenguang Fu, Lin Jiao, Machteld E. Kamminga, Mingquan Yu, Harun Tüysüz, Nitesh Kumar, Vicky Süß, Rana Saha, Abhay K. Srivastava, Steffen Wirth, Gudrun Auffermann, Johannes Gooth, Stuart Parkin, Yan Sun, Enke Liu, Claudia Felser

Abstract: The band inversion in topological phase matters bring exotic physical properties such as the emergence of a topologically protected surface states. They strongly influence the surface electronic structures of the investigated materials and could serve as a good platform to gain insight into the catalytic mechanism of surface reactions. Here we synthesized high-quality bulk single crystals of the t… ▽ More The band inversion in topological phase matters bring exotic physical properties such as the emergence of a topologically protected surface states. They strongly influence the surface electronic structures of the investigated materials and could serve as a good platform to gain insight into the catalytic mechanism of surface reactions. Here we synthesized high-quality bulk single crystals of the topological semimetal Co$_3$Sn$_2$S$_2$. We found that at room temperature, Co$_3$Sn$_2$S$_2$ naturally hosts the band structure of a topological semimetal. This guarantees the existence of robust surface states from the Co atoms. Bulk single crystal of Co$_3$Sn$_2$S$_2$ exposes their Kagome lattice that constructed by Co atoms and have high electrical conductivity. They serves as catalytic centers for oxygen evolution process (OER), making bonding and electron transfer more efficient due to the partially filled $e_g$ orbital. The bulk single crystal exhibits outstanding OER catalytic performance, although the surface area is much smaller than that of Co-based nanostructured catalysts. Our findings emphasize the importance of tailoring topological non-trivial surface states for the rational design of high-activity electrocatalysts. △ Less

Submitted 22 August, 2019; originally announced August 2019.

Comments: 16 pages, 4 figures

Journal ref: Science Advances 5, eaaw9867 (2019)

A window into NV center kinetics via repeated annealing and spatial tracking of thousands of individual NV centers

Authors: Srivatsa Chakravarthi, Chris Moore, April Opsvig, Christian Pederson, Emma Hunt, Andrew Ivanov, Ian Christen, Scott Dunham, Kai-Mei C Fu

Abstract: Knowledge of the nitrogen-vacancy center formation kinetics in diamond is critical to engineering sensors and quantum information devices based on this defect. Here we utilize the longitudinal tracking of single NV centers to elucidate NV defect kinetics during high-temperature annealing from 800-1100 $^\circ$C in high-purity chemical-vapor-deposition diamond. We observe three phenomena which can… ▽ More Knowledge of the nitrogen-vacancy center formation kinetics in diamond is critical to engineering sensors and quantum information devices based on this defect. Here we utilize the longitudinal tracking of single NV centers to elucidate NV defect kinetics during high-temperature annealing from 800-1100 $^\circ$C in high-purity chemical-vapor-deposition diamond. We observe three phenomena which can coexist: NV formation, NV quenching, and NV orientation changes. Of relevance to NV-based applications, a 6 to 24-fold enhancement in the NV density, in the absence of sample irradiation, is observed by annealing at 980 $^\circ$C, and NV orientation changes are observed at 1050 $^\circ$C. With respect to the fundamental understanding of defect kinetics in ultra-pure diamond, our results indicate a significant vacancy source can be activated for NV creation between 950-980 $^\circ$C and suggests that native hydrogen from NVH$_y$ complexes plays a dominant role in NV quenching, in agreement with recent {\it ab initio} calculations. Finally, the direct observation of orientation changes allows us to estimate an NV diffusion barrier of 5.1~eV. △ Less

Submitted 23 November, 2019; v1 submitted 17 July, 2019; originally announced July 2019.

Journal ref: Phys. Rev. Materials 4, 023402 (2020)

Predicting magnetization of ferromagnetic binary Fe alloys from chemical short range order

Authors: Van-Truong Tran, Chu-Chun Fu, Kangming Li

Abstract: Among the ferromagnetic binary alloys, body centered cubic (bcc) Fe-Co is the one showing the highest magnetization. It is known experimentally that ordered Fe-Co structures show a larger magnetization than the random solid solutions with the same Co content. In this work, based on density functional theory (DFT) studies, we aim at a quantitative prediction of this feature, and point out the role… ▽ More Among the ferromagnetic binary alloys, body centered cubic (bcc) Fe-Co is the one showing the highest magnetization. It is known experimentally that ordered Fe-Co structures show a larger magnetization than the random solid solutions with the same Co content. In this work, based on density functional theory (DFT) studies, we aim at a quantitative prediction of this feature, and point out the role of the orbital magnetic moments. Then, we introduce a DFT-based analytical model correlating local magnetic moments and chemical compositions for Co concentrations ranging from 0 to 70 at.%. It is also extended to predict the global magnetization of both ordered and disordered structures at given concentration and chemical short range orders. The latter model is particularly useful for interpreting experimental data. Based on these models, we note that the local magnetic moment of a Fe atom is mainly dictated by the Co concentration in its first two neighbor shells. The detailed local arrangement of the Co atoms has a minor effect. These simple models can fully reproduce the difference in magnetization between the ordered and disordered Fe-Co alloys between 30% and 70% Co, in good agreement with experimental data. Finally, we show that a similar model can be established for another bcc binary Fe alloy, the Fe-Ni, also presenting ferromagnetic interactions between atoms. △ Less

Submitted 27 March, 2019; originally announced March 2019.

Comments: 13 figures, 5 tables