-
Towards establishing best practice in the analysis of hydrogen and deuterium by atom probe tomography
Authors:
Baptiste Gault,
Aparna Saksena,
Xavier Sauvage,
Paul Bagot,
Leonardo S. Aota,
Jonas Arlt,
Lisa T. Belkacemi,
Torben Boll,
Yi-Sheng Chen,
Luke Daly,
Milos B. Djukic,
James O. Douglas,
Maria J. Duarte,
Peter J. Felfer,
Richard G. Forbes,
**g Fu,
Hazel M. Gardner,
Ryota Gemma,
Stephan S. A. Gerstl,
Yilun Gong,
Guillaume Hachet,
Severin Jakob,
Benjamin M. Jenkins,
Megan E. Jones,
Heena Khanchandani
, et al. (20 additional authors not shown)
Abstract:
As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enab…
▽ More
As hydrogen is touted as a key player in the decarbonization of modern society, it is critical to enable quantitative H analysis at high spatial resolution, if possible at the atomic scale. Indeed, H has a known deleterious impact on the mechanical properties (strength, ductility, toughness) of most materials that can hinder their use as part of the infrastructure of a hydrogen-based economy. Enabling H map**, including local hydrogen concentration analyses at specific microstructural features, is essential for understanding the multiple ways that H affect the properties of materials, including for instance embrittlement mechanisms and their synergies, but also spatial map** and quantification of hydrogen isotopes is essential to accurately predict tritium inventory of future fusion power plants, ensuring their safe and efficient operation for example. Atom probe tomography (APT) has the intrinsic capabilities for detecting hydrogen (H), and deuterium (D), and in principle the capacity for performing quantitative map** of H within a material's microstructure. Yet the accuracy and precision of H analysis by APT remain affected by the influence of residual hydrogen from the ultra-high vacuum chamber that can obscure the signal of H from within the material, along with a complex field evaporation behavior. The present article reports the essence of discussions at a focused workshop held at the Max-Planck Institute for Sustainable Materials in April 2024. The workshop was organized to pave the way to establishing best practices in reporting APT data for the analysis of H. We first summarize the key aspects of the intricacies of H analysis by APT and propose a path for better reporting of the relevant data to support interpretation of APT-based H analysis in materials.
△ Less
Submitted 21 May, 2024;
originally announced May 2024.
-
A new class of carbon stabilized austenitic steels resistant to hydrogen embrittlement
Authors:
Heena Khanchandani,
Stefan Zeiler,
Lucas Strobel,
Mathias Goeken,
Peter Felfer
Abstract:
High strength steels are susceptible to H-induced failure, which is typically caused by the presence of diffusible H in the microstructure. The diffusivity of H in austenitic steels with fcc crystal structure is slow. The austenitic steels are hence preferred for applications in the hydrogen-containing atmospheres. However, the fcc structure of austenitic steels is often stabilized by the addition…
▽ More
High strength steels are susceptible to H-induced failure, which is typically caused by the presence of diffusible H in the microstructure. The diffusivity of H in austenitic steels with fcc crystal structure is slow. The austenitic steels are hence preferred for applications in the hydrogen-containing atmospheres. However, the fcc structure of austenitic steels is often stabilized by the addition of Ni, Mn or N, which are relatively expensive alloying elements to use. Austenite can kinetically also be stabilized by using C. Here, we present an approach applied to a commercial cold work tool steel, where we use C to fully stabilize the fcc phase. This results in a microstructure consisting of only austenite and an M7C3 carbide. An exposure to H by cathodic hydrogen charging exhibited no significant influence on the strength and ductility of the C stabilized austenitic steel. While this material is only a prototype based on an existing alloy of different purpose, it shows the potential for low-cost H-resistant steels based on C stabilized austenite.
△ Less
Submitted 27 September, 2023; v1 submitted 24 May, 2023;
originally announced May 2023.
-
Oxide-stabilized microstructure of severe plastically deformed CuCo alloys
Authors:
Martin Stueckler,
Jakub Zalesak,
Timo Mueller,
Stefan Wurster,
Lukas Weissitsch,
Martin Meier,
Peter Felfer,
Christoph Gammer,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by pinning grain boundaries through impurities or oxides. CuCo alloys, severe plastically deformed using high-pressure torsion, were used to investigate the evolution…
▽ More
Nanocrystalline materials are well known for their beneficial mechanical and physical properties. However, it is of utmost importance to stabilize the microstructure at elevated temperatures to broaden the window of application e.g. by pinning grain boundaries through impurities or oxides. CuCo alloys, severe plastically deformed using high-pressure torsion, were used to investigate the evolution of oxides upon annealing. These investigations were performed using electron microscopy, synchrotron high-energy X-ray scattering and atom probe tomography. Monitoring the evolution of oxides by in-situ small angle scattering investigations indicates the growth of primary oxides as well as the formation of another species of oxide at elevated temperatures. Slightly different coarsening can be observed in heat-treated samples, which can be traced back to the influence of different oxide amounts. The initially supersaturated CuCo matrix changes by the decomposition process as well as Co- and Cu-based oxides formation and growth. It has been found that the major number of oxides which are present after annealing, can already be found in the starting materials.
△ Less
Submitted 11 January, 2022;
originally announced January 2022.
-
Magnetic dilution by severe plastic deformation
Authors:
Martin Stückler,
Lukas Weissitsch,
Stefan Wurster,
Peter Felfer,
Heinz Krenn,
Reinhard Pippan,
Andrea Bachmaier
Abstract:
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry, whereas the magnetic properties change as a function of Fe-content from a frustrated regime to a thermal activated behaviour. The magnetic properties are correlated…
▽ More
Mixtures of Fe and Cu powders are cold-compacted and subsequently deformed with severe plastic deformation by high-pressure torsion, leading to bulk samples. The dilution of Fe in the Cu matrix is investigated with SQUID-magnetometry, whereas the magnetic properties change as a function of Fe-content from a frustrated regime to a thermal activated behaviour. The magnetic properties are correlated with the microstructure, investigated by synchrotron X-ray diffraction and atom probe tomography. Annealing of the as-deformed states leads to demixing and grain growth, with the coercivity as a function of annealing temperature obeying the random anisotropy model. The presented results show that high-pressure torsion is a technique capable to affect the microstructure even on atomic length scales.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.