-
Analysis of water ice in nanoporous copper needles using cryo atom probe tomography
Authors:
Levi Tegg,
Ingrid E. McCarroll,
Se-Ho Kim,
Renelle Dubosq,
Eric V. Woods,
Ayman A. El-Zoka,
Baptiste Gault,
Julie M. Cairney
Abstract:
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion…
▽ More
The application of atom probe tomography (APT) to frozen liquids is limited by difficulties in specimen preparation. Here, we report on the use of nanoporous Cu needles as a physical framework to hold water ice for investigation using APT. Nanoporous Cu needles are prepared by the electropolishing and dealloying of Cu-Mn matchstick precursors. Cryogenic scanning electron microscopy and focused-ion beam milling reveal a hierarchical, dendritic, highly-wettable microstructure. The atom probe mass spectrum is dominated by peaks of Cu+ and H(H2O)n+ up to n <= 3, and the reconstructed volume shows the protrusion of a Cu ligament into an ice-filled pore. The continuous Cu ligament network electrically connects the apex to the cryostage, leading to enhanced electric field at the apex and increased cooling, both of which simplify the mass spectrum compared to previous reports.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Nanoporous gold thin films as substrates to analyze liquids by cryo-atom probe tomography
Authors:
E. V. Woods,
A. Saksena,
A. A. El-Zoka,
L. T. Stephenson,
T. M. Schwarz,
M. P. Singh,
L. S. Aota,
S. -H. Kim,
J. Schneider,
B. Gault
Abstract:
Cryogenic atom probe tomography (cryo-APT) is being developed to enable nanoscale compositional analyses of frozen liquids. Yet, the availability of readily available substrates that allow for the fixation of liquids while providing sufficient strength to their interface, is still an issue. Here we propose the use of 1-2 microns thick binary alloy film of gold-silver (AuAg) sputtered onto flat sil…
▽ More
Cryogenic atom probe tomography (cryo-APT) is being developed to enable nanoscale compositional analyses of frozen liquids. Yet, the availability of readily available substrates that allow for the fixation of liquids while providing sufficient strength to their interface, is still an issue. Here we propose the use of 1-2 microns thick binary alloy film of gold-silver (AuAg) sputtered onto flat silicon, with sufficient adhesion without an additional layer. Through chemical dealloying, we successfully fabricate a nanoporous substrate, with open-pore structure, which is mounted on a microarray of Si posts by lift out in the focused-ion beam, allowing for cryogenic fixation of liquids. We present cryo-APT results obtained after cryogenic sharpening, vacuum cryo-transfer and analysis of pure water on top and inside the nanoporous film. We demonstrate that this new substrate has the requisite characteristics for facilitating cryo-APT of frozen liquids, with a relatively lower volume of precious metals. This complete workflow represents an improved approach for frozen liquid analysis, from preparation of the films to the successful fixation of the liquid in the porous network, to cryo-atom probe tomography.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Scalable Substrate Development for Aqueous Biological Samples for Atom Probe Tomography
Authors:
Eric V. Woods,
Se-Ho Kim,
Ayman A. El-Zoka,
Leigh T. Stephenson,
Baptiste Gault
Abstract:
Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a "lift-out" procedure of a small sample of material. Here, two alternative substr…
▽ More
Reliable and consistent preparation of atom probe tomography (APT) specimens from aqueous and hydrated biological specimens remains a significant challenge. One particularly difficult process step is the use of a focused ion beam (FIB) instrument for preparing the required needle-shaped specimen, typically involving a "lift-out" procedure of a small sample of material. Here, two alternative substrate designs are introduced that enable using FIB only for sharpening, along with example APT datasets. The first design is a laser-cut FIB-style half-grid close to those used for transmission-electron microscopy, that can be used in a grid holder compatible with APT pucks. The second design is a larger, standalone self-supporting substrate called a "crown", with several specimen positions that self-aligns in APT pucks, prepared by electrical discharge machining (EDM). Both designs are made nanoporous, to provide strength to the liquid-substrate interface, using chemical and vacuum dealloying. We select alpha brass a simple, widely available, lower-cost alternative to previously proposed substrates. We present the resulting designs, APT data, and provide suggestions to help drive wider community adoption.
△ Less
Submitted 31 August, 2023;
originally announced August 2023.
-
Near-Atomic Scale Perspective on the Oxidation of Ti$_3$C$_2$T$_x$ MXenes: Insights from Atom Probe Tomography
Authors:
Mathias Krämer,
Bar Favelukis,
Ayman A. El-Zoka,
Maxim Sokol,
Brian A. Rosen,
Noam Eliaz,
Se-Ho Kim,
Baptiste Gault
Abstract:
MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties and great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities…
▽ More
MXenes are a family of 2D transition metal carbides and nitrides with remarkable properties and great potential for energy storage and catalysis applications. However, their oxidation behavior is not yet fully understood, and there are still open questions regarding the spatial distribution and precise quantification of surface terminations, intercalated ions, and possible uncontrolled impurities incorporated during synthesis and processing. Here, atom probe tomography analysis of as-synthesized Ti$_3$C$_2$T$_x$ MXenes reveals the presence of alkali (Li, Na) and halogen (Cl, F) elements as well as unetched Al. Following oxidation of the colloidal solution of MXenes, it is observed that the alkalies enriched in TiO$_2$ nanowires. Although these elements are tolerated through the incorporation by wet chemical synthesis, they are often overlooked when the activity of these materials is considered, particularly during catalytic testing. This work demonstrates how the capability of atom probe tomography to image these elements in 3D at the near-atomic scale can help to better understand the activity and degradation of MXenes, in order to guide their synthesis for superior functional properties.
△ Less
Submitted 31 May, 2023;
originally announced May 2023.
-
The fate of water in hydrogen-based iron oxide reduction
Authors:
Ayman A. El-Zoka,
Leigh T. Stephenson,
Se-Ho Kim,
Baptiste Gault,
Dierk Raabe
Abstract:
Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has…
▽ More
Gas-solid reactions are cornerstones of many catalytic and redox processes that will underpin the energy and sustainability transition. The specific case of hydrogen-based iron oxide reduction is the foundation to render the global steel industry fossil-free, an essential target as iron production is the largest single industrial emitter of carbon dioxide. Our perception of gas-solid reactions has not only been limited by the availability of state-of-the-art techniques which can delve into the reacted solids in great structural and chemical detail, but we continue to miss an important reaction partner that defines the thermodynamics and kinetics of gas phase reactions: the gas molecules. In this investigation, we use the latest development in cryogenic atom probe tomography to study the quasi in-situ evolution of gas phase heavy water at iron-iron oxide interfaces resulting from the direct reduction of iron oxide by deuterium gas at 700°C. The findings provide new insights into the formation kinetics and location of water formed during hydrogen-based reduction of FeO, an its interaction with the ongoing redox reaction.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Effect of Pore Formation on Redox-Driven Phase Transformation
Authors:
Xuyang Zhou,
Yang Bai,
Ayman A. El-Zoka,
Se-Ho Kim,
Yan Ma,
Christian H. Liebscher,
Baptiste Gault,
Jaber R. Mianroodi,
Gerhard Dehm,
Dierk Raabe
Abstract:
When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system.…
▽ More
When solid-state redox-driven phase transformations are associated with mass loss, vacancies are produced that develop into pores. These pores can influence the kinetics of certain redox and phase transformation steps. We investigated the structural and chemical mechanisms in and at pores in a combined experimental-theoretical study, using the reduction of iron oxide by hydrogen as a model system. The redox product (water) accumulates inside the pores and shifts the local equilibrium at the already reduced material back towards re-oxidation into cubic-Fe1-xO (where x refers to Fe deficiency, space group Fm3-m). This effect helps to understand the sluggish reduction of cubic-Fe1-xO by hydrogen, a key process for future sustainable steelmaking.
△ Less
Submitted 6 March, 2023; v1 submitted 19 September, 2022;
originally announced September 2022.
-
Understanding the degradation of a model Si-anode in Li-ion battery at the atomic-scale
Authors:
Se-Ho Kim,
Kang Dong,
Huan Zhao,
Ayman A. El-Zoka,
Xuyang Zhou,
Eric V. Woods,
Finn Giuliani,
Ingo Manke,
Dierk Raabe,
Baptiste Gault
Abstract:
Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, an…
▽ More
Si-anodes have long been candidates thanks to an expected ten-fold increase in capacity compared to graphite. However, details of the mechanisms governing their degradation remain elusive, hindering science-guided development of long-lived Si-based anodes. Here we demonstrate how the latest developments in cryo-atom probe tomography enable the in-depth analysis of the electrode and electrolyte, and their interface at atomic-level.
△ Less
Submitted 17 July, 2022;
originally announced July 2022.
-
Controlled do** of electrocatalysts through engineering impurities
Authors:
Se-Ho Kim,
Su-Hyun Yoo,
Sangyong Shin,
Ayman A. El-Zoka,
Olga Kasian,
Joohyun Lim,
Jiwon Jeong,
Christina Scheu,
Joerg Neugebauer,
Hyunjoo Lee,
Mira Todorova,
Baptiste Gault
Abstract:
Fuel cells recombine water from H2 and O2 thereby powering e.g. cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation react…
▽ More
Fuel cells recombine water from H2 and O2 thereby powering e.g. cars or houses with no direct carbon emission. In anion-exchange membrane fuel cells (AEMFCs), to reach high power densities, operating at high pH is an alternative to using large volumes of noble metals catalysts at the cathode, where the oxygen-reduction reaction occurs. However, the sluggish kinetics of the hydrogen-oxidation reaction (HOR) hinders upscaling despite promising catalysts. Here, we observe an unexpected ingress of B into Pd nano-catalysts synthesised by wet-chemistry, gain control over this B-do**, and report on its influence on the HOR activity in alkaline conditions. We rationalize our findings using ab-initio calculations of both H- and OH-adsorption on B-doped Pd. Using this "impurity engineering" approach, we thus design Pt-free catalysts as required in electrochemical energy conversion devices, e.g. next generations of AEMFCs, that satisfy the economic and environmental constraints, i.e. reasonable operating costs and long-term stability, to enable the hydrogen economy.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Atom probe analysis of battery materials: challenges and ways forward
Authors:
Se-Ho Kim,
Stoichko Antonov,
Xuyang Zhou,
Leigh T. Stephenson,
Chanwon Jung,
Ayman A. El-Zoka,
Daniel K. Schreiber,
Michele Conroy,
Baptiste Gault
Abstract:
The worldwide developments of electric vehicles, as well as large-scale or grid-scale energy storage to compensate the intermittent nature of renewable energy generation has generated a surge of interest in battery technology. Understanding the factors controlling battery capacity and, critically, their degradation mechanisms to ensure long-term, sustainable and safe operation requires detailed kn…
▽ More
The worldwide developments of electric vehicles, as well as large-scale or grid-scale energy storage to compensate the intermittent nature of renewable energy generation has generated a surge of interest in battery technology. Understanding the factors controlling battery capacity and, critically, their degradation mechanisms to ensure long-term, sustainable and safe operation requires detailed knowledge of their microstructure and chemistry, and their evolution under operating conditions, on the nanoscale. Atom probe tomography (APT) provides compositional map** of materials in three-dimensions with sub-nanometre resolution, and is poised to play a key role in battery research. However, APT is underpinned by an intense electric-field that can drive lithium migration, and many battery materials are reactive oxides, requiring careful handling and sample transfer. Here, we report on the analysis of both anode and cathode materials, and show that electric-field driven migration can be suppressed by using shielding by embedding powder particles in a metallic matrix or by using a thin conducting surface layer. We demonstrate that for a typical cathode material, cryogenic specimen preparation and transport under ultra-high vacuum leads to major delithiation of the specimen during the analysis. In contrast, transport of specimens through air enables analysis of the material. Finally, we discuss the possible physical underpinnings and discuss ways forward to enable shield of the electric field, which helps address the challenges inherent to the APT analysis of battery materials.
△ Less
Submitted 20 January, 2022; v1 submitted 7 October, 2021;
originally announced October 2021.
-
Laser-equipped gas reaction chamber for probing environmentally sensitive materials at near atomic scale
Authors:
Heena Khanchandani,
Ayman A. El-Zoka,
Se-Ho Kim,
Uwe Tezins,
Dirk Vogel,
Andreas Sturm,
Dierk Raabe,
Baptiste Gault,
Leigh Stephenson
Abstract:
Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environ…
▽ More
Numerous metallurgical and materials science applications depend on quantitative atomic-scale characterizations of environmentally-sensitive materials and their transient states. Studying the effect upon materials subjected to thermochemical treatments in specific gaseous atmospheres is of central importance for specifically studying a material's resistance to certain oxidative or hydrogen environments. It is also important for investigating catalytic materials, direct reduction of an oxide, particular surface science reactions or nanoparticle fabrication routes. This manuscript realizes such experiments upon a thermochemical reaction chamber called the Reacthub and allows for transferring treated materials under cryogenic & ultrahigh vacuum workflow conditions for characterisation by either atom probe or scanning Xe+/electron microscopies. Two examples are discussed in the present study. One protocol was in the deuterium gas charging (25 kPa D2 at 200 °C) of a high-manganese twinning-induced-plasticity steel and characterization of the ingress and trap** of hydrogen at various features (grain boundaries in particular) in efforts to relate this to the steel's hydrogen embrittlement susceptibility. Deuterium was successfully detected after gas charging but most contrast originated from the complex ion FeOD+ signal and the feature may be an artefact. The second example considered the direct deuterium reduction (5 kPa D2 at 700 °C) of a single crystal wuestite sample, demonstrating that under a standard thermochemical treatment causes rapid reduction upon the nanoscale. Further studies are required for complete confidence about these phenomena, but these experiments successfully demonstrate that how an ex-situ thermochemical treatment can be realised that captures environmentally-sensitive transient states that can be analysed by atomic-scale by atom probe microscope.
△ Less
Submitted 21 October, 2021; v1 submitted 26 July, 2021;
originally announced July 2021.
-
Understanding alkali contamination in colloidal nanomaterials to unlock grain boundary impurity engineering
Authors:
Se-Ho Kim,
Su-Hyun Yoo,
Poulami Chakraborty,
Jiwon Jeong,
Joohyun Lim,
Ayman A. El-Zoka,
Xuyang Zhou,
Leigh T. Stephenson,
Tilmann Hickel,
Jörg Neugebauer,
Christina Scheu,
Mira Todorova,
Baptiste Gault
Abstract:
Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesi…
▽ More
Metal nano-aerogels combine a large surface area, a high structural stability, and a high catalytic activity towards a variety of chemical reactions. The performance of such nanostructures is underpinned by the atomic-level distribution of their constituents. Yet monitoring their sub-nanoscale structure and composition to guide property optimization remains extremely challenging. Here, we synthesized Pd nano-aerogels from a K2PdCl4 precursor and two different NaBH4 reductant concentrations in distilled water. Atom probe tomography reveals that the aerogel is poly-crystalline and that impurities (Na, K) are integrated from the solution into grain boundaries. Ab initio calculations indicate that these impurities preferentially bound to the Pd-metal surface and are ultimately found in grain boundaries forming as the particles coalesce during synthesis, with Na atoms thermodynamically equilibrating with the surrounding solution and K atoms remaining between growing grains. If controlled, impurity integration, i.e. grain boundary decoration, may offer opportunities for designing new nano-aerogels.
△ Less
Submitted 4 November, 2021; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Phase Separation and Anomalous Volume Expansion in Frozen Microscale Eutectic Indium-Gallium upon Remelting
Authors:
Se-Ho Kim,
Leigh T. Stephenson,
Alisson K. da Silva,
Baptiste Gault,
Ayman A. El-Zoka
Abstract:
The eutectic Ga-In (EGaIn) alloy has low vapor pressure, low toxicity, high thermal and electrical conductivities, and thus has shown a great potential for smart material applications. For such applications, EGaIn is maintained above its melting point, below which it undergoes solidification and phase separation. A scientific understanding of the structural and compositional evolution during therm…
▽ More
The eutectic Ga-In (EGaIn) alloy has low vapor pressure, low toxicity, high thermal and electrical conductivities, and thus has shown a great potential for smart material applications. For such applications, EGaIn is maintained above its melting point, below which it undergoes solidification and phase separation. A scientific understanding of the structural and compositional evolution during thermal cycling could help further assess the application range of low-melting-point fusible alloys. Here, we use an integrated suite of cryogenically-enabled advanced microscopy & microanalysis to better understand phase separation and (re)mixing processes in EGaIn. We reveal an overlooked thermal-stimulus-response behaviour for frozen mesoscale EGaIn at cryogenic temperatures, with a sudden volume expansion observed during in-situ heat-cycling, associated with the immiscibility between Ga and In during cooling and the formation of metastable Ga phases. These results emphasize the importance of the kinetics of rejuvenation, and open new paths for EGaIn as a self-healing material.
△ Less
Submitted 16 March, 2022; v1 submitted 26 May, 2021;
originally announced May 2021.
-
A liquid metal encapsulation for analyzing porous nanomaterials by atom probe tomography
Authors:
Se-Ho Kim,
Ayman A. El-Zoka,
Baptiste Gault
Abstract:
Analyzing porous (nano)materials by the atom probe tomography has been notoriously difficult. The electrostatic pressure intensifies stress at voids which results in premature failure of the specimen, and the electrostatic field distribution near voids lead to aberrations that are difficult to predict. Here we propose a new encapsulating method for a porous sample using a low-melting-point Bi-In-S…
▽ More
Analyzing porous (nano)materials by the atom probe tomography has been notoriously difficult. The electrostatic pressure intensifies stress at voids which results in premature failure of the specimen, and the electrostatic field distribution near voids lead to aberrations that are difficult to predict. Here we propose a new encapsulating method for a porous sample using a low-melting-point Bi-In-Sn alloy, known as Fields metal. As a model porous sample, we used single-crystalline wustite following direct hydrogen-reduced into iron. The complete encapsulation is performed using in-situ heating on the stage of the scanning-electron microscope up to approx. 70 Celsius. No visible corrosion nor dissolution of the sample occurred. Subsequently specimens are shaped by focused ion beam milling under cryogenic conditions at -190 Celsius. The proposed approach is versatile, can be applied to provide good quality atom probe datasets from microporous materials.
△ Less
Submitted 14 March, 2021;
originally announced March 2021.
-
Influence of microstructure and atomic-scale chemistry on iron ore reduction with hydrogen at 700°C
Authors:
Se-Ho Kim,
Xue Zhang,
Kevin Schweinar,
Isnaldi R. Souza Filho,
Katja Angerendt,
Yan Ma,
Dirk Vogel,
Leigh T. Stephenson,
Ayman A. El-Zoka,
Jaber Rezaei Mianroodi,
Michael Rohwerder,
Baptiste Gault,
Dierk Raabe
Abstract:
With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, cau…
▽ More
With 1.85 billion tons produced per year, steel is the most important material class in terms of volume and environmental impact. While steel is a sustainability enabler, for instance through lightweight design, magnetic devices, and efficient turbines, its primary production is not. For 3000 years, iron has been reduced from ores using carbon. Today 2.1 tons CO2 are produced per ton of steel, causing 30% of the global CO2 emissions in the manufacturing sector, which translates to 6.5% of the global CO2 emissions. These numbers qualify iron- and steel-making as the largest single industrial greenhouse gas emission source. The envisaged future industrial route to mitigate these CO2 emissions targets green hydrogen as a reductant. Although this reaction has been studied for decades, its kinetics is not well understood, particularly during the wustite reduction step which is dramatically slower than the hematite reduction. Many rate-limiting factors of this reaction are set by the micro- and nanostructure as well as the local chemistry of the ores. Their quantification allows knowledge-driven ore preparation and process optimization to make the hydrogen-based reduction of iron ores commercially viable, enabling the required massive CO2 mitigation to ease global warming. Here, we report on a multi-scale structure and composition analysis of iron reduced from hematite with pure H2, reaching down to near-atomic scale.
△ Less
Submitted 10 February, 2021;
originally announced February 2021.
-
Status and direction of atom probe analysis of frozen liquids
Authors:
Patrick Stender,
Baptiste Gault,
Tim M. Schwarz,
Eric V. Woods,
Se-Ho Kim,
Jonas Ott,
Leigh T. Stephenson,
Guido Schmitz,
Christoph Freysoldt,
Johannes Kästner,
Ayman A. El-Zoka
Abstract:
Imaging of liquids and cryogenic biological materials by electron microscopy has been recently enabled by innovative approaches for specimen preparation and the fast development of optimised instruments for cryo-enabled electron microscopy (cryo-EM). Yet, Cryo-EM typically lacks advanced analytical capabilities, in particular for light elements. With the development of protocols for frozen wet spe…
▽ More
Imaging of liquids and cryogenic biological materials by electron microscopy has been recently enabled by innovative approaches for specimen preparation and the fast development of optimised instruments for cryo-enabled electron microscopy (cryo-EM). Yet, Cryo-EM typically lacks advanced analytical capabilities, in particular for light elements. With the development of protocols for frozen wet specimen preparation, atom probe tomography (APT) could advantageously complement insights gained by cryo-EM. Here, we report on different approaches that have been recently proposed to enable the analysis of relatively large volumes of frozen liquids from either a flat substrate or the fractured surface of a wire. Both allowed for analysing water ice layers which are several microns thick consisting of pure water, pure heavy-water and aqueous solutions. We discuss the merits of both approaches, and prospects for further developments in this area. Preliminary results raise numerous questions, in part concerning the physics underpinning field evaporation. We discuss these aspects and lay out some of the challenges regarding the APT analysis of frozen liquids.
△ Less
Submitted 3 February, 2021;
originally announced February 2021.
-
Enabling near-atomic-scale analysis of frozen water
Authors:
Ayman A. El-Zoka,
Se-Ho Kim,
Sylvain Deville,
Roger C. Newman,
Leigh T. Stephenson,
Baptiste Gault
Abstract:
Transmission electron microscopy has undergone a revolution in recent years with the possibility to perform routine cryo-imaging of biological materials and (bio)chemical systems, as well as the possibility to image liquids via dedicated reaction cells or graphene-sandwiching. These approaches however typically require imaging a large number of specimens and reconstructing an average representatio…
▽ More
Transmission electron microscopy has undergone a revolution in recent years with the possibility to perform routine cryo-imaging of biological materials and (bio)chemical systems, as well as the possibility to image liquids via dedicated reaction cells or graphene-sandwiching. These approaches however typically require imaging a large number of specimens and reconstructing an average representation and often lack analytical capabilities. Here, using atom probe tomography we provide atom-by-atom analyses of frozen liquids and analytical sub-nanometre three dimensional reconstructions. The analyzed ice is in contact with, and embedded within, nanoporous gold (NPG). We report the first such data on 2-3 microns thick layers of ice formed from both high purity deuterated water and a solution of 50mM NaCl in high purity deuterated water. We present a specimen preparation strategy that uses a NPG film and, additionally, we report on an analysis of the interface between nanoporous gold and frozen salt water solution with an apparent trend in the Na and Cl concentrations across the interface. We explore a range of experimental parameters to show that the atom probe analyses of bulk aqueous specimens come with their own special challenges and discuss physical processes that may produce the observed phenomena. Our study demonstrates the viability of using frozen water as a carrier for near-atomic scale analysis of objects in solution by atom probe tomography.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.