-
Effect of electron-phonon coupling on thermal transport in metals: a Monte Carlo approach for solving the coupled electron-phonon Boltzmann transport equations
Authors:
Jie Peng,
W. Ryan Deskins,
Maria Helena Braga,
Anter El-Azab
Abstract:
In this work, the effect of electron-phonon (e-ph) coupling on both electron and phonon transport of metals is investigated via first principles calculations. A Monte-Carlo (MC) approach for solving the coupled electron-phonon Boltzmann transport equations is developed to investigate thermal conductivity of metals. In this approach, the anisotropic electron band structure, phonon dispersion in the…
▽ More
In this work, the effect of electron-phonon (e-ph) coupling on both electron and phonon transport of metals is investigated via first principles calculations. A Monte-Carlo (MC) approach for solving the coupled electron-phonon Boltzmann transport equations is developed to investigate thermal conductivity of metals. In this approach, the anisotropic electron band structure, phonon dispersion in the full Brillouin zone, and mode-dependent thermal relaxation time of electrons and phonons are calculated from first principles. Using this approach, MC simulations of coupled e-ph thermal transport at different temperatures in α-U and Ag are performed. These two materials were selected as a way to demonstrate the applicability of the method in different fields. The results indicate that the electron relaxation time due to phonon scattering is orders of magnitude smaller than the phonon relaxation time due to electron scattering. The results also show that, in phonon thermal transport, the impact of ph-e scattering is almost negligible and the ph-ph scattering dominates phonon transport. At high temperature, the electrons dominate thermal transport in both α-U and Ag. However, at low temperature, the phonon contribution to the total thermal conductivity of α-U is significant. Moreover, the Lorenz ratio deviates from the Sommerfeld value at low to intermediate temperatures, where the Wiedemann-Franz law is not applicable. Finally, we show that the Ag electronic thermal conductivity shows a stronger size effect than its phonon thermal conductivity.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
A quantitative phase-field model for void evolution in defect supersaturated environments: a novel introduction of defect reaction asymmetry
Authors:
Sreekar Rayaprolu,
Kyle Starkey,
Anter El-Azab
Abstract:
Voids develop in crystalline materials under energetic particle irradiation, as in nuclear reactors. Understanding the underlying mechanisms of void nucleation and growth is of utmost importance as it leads to dimensional instability of the metallic materials. In the past two decades, researchers have adopted the phase-field approach to study the phenomena of void evolution under irradiation. The…
▽ More
Voids develop in crystalline materials under energetic particle irradiation, as in nuclear reactors. Understanding the underlying mechanisms of void nucleation and growth is of utmost importance as it leads to dimensional instability of the metallic materials. In the past two decades, researchers have adopted the phase-field approach to study the phenomena of void evolution under irradiation. The approach involves modeling the boundary between the void and matrix with a diffused interface. However, none of the existing models are quantitative in nature. This work introduces a thermodynamically consistent, quantitative diffuse interface model based on KKS formalism to describe the void evolution under irradiation. The model concurrently considers both vacancies and self-interstitials in the description of void evolution. Unique to our model is the presence of two mobility parameters in the equation of motion of the phase-field variable. The two mobility parameters relate the driving force for vacancy and self-interstitial interaction to the interface motion, analogous to dislocation motion through climb and glide processes. The asymptotic matching of the phase-field model with the sharp-interface theory fixes the two mobility parameters in terms of the material parameters in the sharp-interface model. The Landau coefficient, which controls the height of the double-well function in the phase field variable, and the gradient coefficient of the phase field variable are fixed based on the interfacial energy and interface width of the boundary. With all the parameters in the model determined in terms of the material parameters, we thus have a new phase field model for void evolution. Simple test cases will show the void evolution under various defect supersaturation to validate our new phase-field model.
△ Less
Submitted 21 May, 2024; v1 submitted 28 July, 2023;
originally announced July 2023.
-
Dislocation correlations and the continuum dynamics of the weak line bundle ensemble
Authors:
Joseph Pierre Anderson,
Anter El-Azab
Abstract:
Progress toward a first-principles theory of plasticity and work-hardening is currently impeded by an insufficient picture of dislocation kinetics (the dynamic effect of driving forces in a given dislocation theory). This is because present methods ignore the short-range interaction of dislocations. This work presents a kinetic theory of continuum dislocation dynamics in a vector density framework…
▽ More
Progress toward a first-principles theory of plasticity and work-hardening is currently impeded by an insufficient picture of dislocation kinetics (the dynamic effect of driving forces in a given dislocation theory). This is because present methods ignore the short-range interaction of dislocations. This work presents a kinetic theory of continuum dislocation dynamics in a vector density framework which takes into account the short-range interactions by means of suitably defined correlation functions. The weak line bundle ensemble of dislocations is defined, whereby the treatment of dislocations by a vector density is justified. It is then found by direct averaging of the dislocation transport equation that additional driving forces arise which are dependent on the dislocation correlation. A combination of spatial coarse-graining and statistical averaging of discrete dislocation systems are used to evaluate the various classes of tensorial dislocation correlations which arise in the line bundle kinetic theory. A novel, chiral classification of slip system interactions in FCC crystals is used to define proper and improper rotations by which correlation functions corresponding to six interaction classifications can be evaluated. The full set of these six dislocation correlations are evaluated from discrete data. Only the self-correlations (for densities of like slip system) are found to be highly anisotropic. All six classes of correlation functions are found to decay within 2-4 times the coarse-graining distance. The correlations corresponding to the coplanar interactions are found to be negligible. Implications of the evaluated correlations for the implementation of vector density continuum dislocation dynamics are discussed, especially in terms of an additional correlation component of the driving force and a gesture toward a coarse-grained dislocation mobility.
△ Less
Submitted 12 February, 2024; v1 submitted 17 May, 2023;
originally announced May 2023.
-
Evolution of dislocation loops in irradiated α-Uranium: An atomistically-informed cluster dynamics investigation
Authors:
Sanjoy Kumar Mazumder,
Tiankai Yao,
Anter El-Azab
Abstract:
An atomistically informed mean field cluster dynamics model has been presented to investigate the nucleation and growth of defect loops in irradiated α-U. TEM analysis of neutron irradiated α-U shows the evolution of SIA and vacancy loops on (010) and (100) crystallographic planes respectively, resulting in an anisotropic swelling of the face-centered orthorhombic crystal. The accumulation of such…
▽ More
An atomistically informed mean field cluster dynamics model has been presented to investigate the nucleation and growth of defect loops in irradiated α-U. TEM analysis of neutron irradiated α-U shows the evolution of SIA and vacancy loops on (010) and (100) crystallographic planes respectively, resulting in an anisotropic swelling of the face-centered orthorhombic crystal. The accumulation of such loops, on irradiation, has been closely estimated using the cluster dynamics model. Parameters of the model, namely, the binding energy of point defects, i.e., Ui and VU, to SIA and vacancy loops respectively and the diffusivity of point defects govern the energetics and kinetics of the defect clustering phenomenon. We have studied the crystallography of defect loops and computed the binding energy of point defects to such loops using an angular dependent EAM potential in classical MD simulations. Using bond-boost hyperdynamics in LAMMPS, the anisotropic diffusion of Ui and VU in α-U has been investigated. The mechanisms of point defect diffusion and the associated migration energies have also been reported and compared with previous DFT studies. Our CD model uses the computed parameters, within their error ranges, to predict the population of defect clusters with a dose-rate and temperature similar to the neutron irradiation experiments. The predictions show an accumulation of small sized vacancy loops along with a population of large and growing SIA loops which closely corresponds to the TEM observations.
△ Less
Submitted 13 July, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
Plasticity in irradiated FeCrAl nanopillars investigated using discrete dislocation dynamics
Authors:
Yash Pachaury,
George Warren,
Janelle P. Wharry,
Giacomo Po,
Anter El-Azab
Abstract:
In this paper, we investigate plasticity in irradiated FeCrAl nanopillars using discrete dislocation dynamics simulations (DDD), with comparisons to transmission electron microscopic (TEM) in situ tensile tests of ion and neutron irradiated commercial FeCrAl alloy C35M. The effects of irradiation-induced defects, such as a/2 111 and a 100 type loops and composition fluctuations representative of p…
▽ More
In this paper, we investigate plasticity in irradiated FeCrAl nanopillars using discrete dislocation dynamics simulations (DDD), with comparisons to transmission electron microscopic (TEM) in situ tensile tests of ion and neutron irradiated commercial FeCrAl alloy C35M. The effects of irradiation-induced defects, such as a/2 111 and a 100 type loops and composition fluctuations representative of phase separation in irradiated FeCrAl alloys, are investigated separately as well as superposed together in simulations. We explore the effects of defects on the stress-strain behavior, specifically yield strength and hardening response, of FeCrAl nanopillars. Our simulations confirm the widely accepted fact that irradiated alloys exhibit a stress-strain response with higher yield strength and hardening as compared to homogeneous alloys. However, our DDD calculations reveal an atypical superposition of the hardening contributions due to composition inhomogeneity and irradiation loops wherein hardening due composition inhomogeneity counteracts hardening due to irradiation loops at small scales. As a result, we observe that the yield strength in irradiated alloys, after taking into consideration the effects of both composition inhomogeneity and irradiation loops, is smaller than the yield strength of the alloys with only irradiation loops and is approximately same for the alloy with composition inhomogeneity alone. We identify this destructive interference in the superposition in our parallel TEM in situ tensile tests on unirradiated, ion irradiated, and neutron irradiated C35M FeCrAl alloy as well. This destructive interference in the hardening contributions contrasts with the widely utilized dispersed barrier hardening (DBH) models by the experimental community to model the hardening contributions due to different irradiation induced defects.
△ Less
Submitted 4 January, 2023;
originally announced January 2023.
-
A data driven approach for cross-slip modelling in continuum dislocation dynamics
Authors:
Vignesh Vivekanandan,
Ben Anglin,
Anter El-Azab
Abstract:
Cross-slip is a thermally activated process by which screw dislocation changes its glide plane to another slip plane sharing the same Burgers vector. The rate at which this process happens is determined by a Boltzmann type expression that is a function of the screw segment length and the stress acting on the dislocation. In continuum dislocation dynamics (CDD), the information regarding the length…
▽ More
Cross-slip is a thermally activated process by which screw dislocation changes its glide plane to another slip plane sharing the same Burgers vector. The rate at which this process happens is determined by a Boltzmann type expression that is a function of the screw segment length and the stress acting on the dislocation. In continuum dislocation dynamics (CDD), the information regarding the length of the screw dislocation segment and local stress state on dislocations are lost due to the coarse-grained representation of the density. In this work, a data driven approach to characterize the lost information by analyzing the discrete dislocation configurations is proposed to enable cross-slip modeling in the CDD framework in terms of the coarse-grained dislocation density and stress fields. The analysis showed that the screw segment length follows an exponential distribution, and the stress fluctuations, defined as the difference between the stress on the dislocations and the mean field stress in CDD, follows a Lorentzian distribution. A novel approach for cross slip implementation in CDD employing the screw segment length and stress fluctuation statistics was proposed and rigorously tested by comparing the CDD cross-slip rates with discrete dislocation dynamics (DDD) rates. This approach has been applied in conjunction with three cross-slip models used in DDD simulations differing mainly in the functional form of cross slip activation energy. It was found that different cross-slip activation energy formulations yielded different cross-slip rates, yet the effect on mechanical stress-strain response and dislocation density evolution was minimal for the [001] type loading.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Quantitative assessment of perturbation theory-based lattice thermal conductivity models using quasi-continuum approximation
Authors:
Ahmed Hamed,
Anter El-Azab
Abstract:
The impact of dispersion relations, anisotropy, and Brillouin zone structure on intrinsic phonon scattering rates has been assessed within the harmonic approximation-perturbation theory approach for lattice dynamics. Anisotropic nonlinear elastic continuum has been considered with various levels of representation of phonon dispersion and Brillouin zone shape, and with Grüneisen parameter used as a…
▽ More
The impact of dispersion relations, anisotropy, and Brillouin zone structure on intrinsic phonon scattering rates has been assessed within the harmonic approximation-perturbation theory approach for lattice dynamics. Anisotropic nonlinear elastic continuum has been considered with various levels of representation of phonon dispersion and Brillouin zone shape, and with Grüneisen parameter used as an average measure of crystal anharmonicity. In addition, thermal conductivity prediction of different models for the treatment of the off-diagonal elements of phonon collision operator are compared. For a model system, argon, with a relatively high anisotropy ratio, the results show that accounting for anisotropy is critical for accurate determination of available phase space for 3-phonon scattering and scattering rates. Moreover, widely spread approximations such as isotropic continuum and Single Mode Relaxation Time are found unreliable, even for cubic systems. The success of these approximations is demonstrated to be a direct result of error cancellations. By benchmarking against our iterative solution of Boltzmann Transport Equation, which achieves excellent agreement with experimental thermal conductivity data for solid argon (2-80 K), we show the essential importance of considering coupling terms of phonon scattering kernel at phonon mode level, and not in a statistical average sense as, for example, Callaway model does. Moreover, our results manifest the role played by coherent phonon scattering near the melting temperature, in agreement with molecular dynamics findings, which serves as an evidence for the crossover between heat diffusion mediated by particle-like phonons (incoherent scattering) and wave-like heat propagation due to phonon coherent scattering. Furthermore, sensitivity of conductivity prediction to phonon spectrum is revealed to change over temperature.
△ Less
Submitted 14 June, 2022;
originally announced June 2022.
-
Atomistically-informed modeling of point defect clustering and evolution in irradiated ThO2
Authors:
Sanjoy Kumar Mazumder,
Maniesha Kaur Salaken Singh,
Tomohisa Kumagai,
Anter El-Azab
Abstract:
A cluster dynamics (CD) model has been developed to investigate the nucleation and growth of point defect clusters, i.e., interstitial prismatic loops and nanoscale and sub-nanoscale voids, in ThO2 during irradiation by energetic particles. The model considers cluster off-stoichiometry due to the asymmetry of point defect generation on the O and Th sublattices under irradiation, as well as the poi…
▽ More
A cluster dynamics (CD) model has been developed to investigate the nucleation and growth of point defect clusters, i.e., interstitial prismatic loops and nanoscale and sub-nanoscale voids, in ThO2 during irradiation by energetic particles. The model considers cluster off-stoichiometry due to the asymmetry of point defect generation on the O and Th sublattices under irradiation, as well as the point defect diffusivities and the defect binding energies to clusters. The energies were established using detailed molecular dynamics simulations considering the statistical variability of cluster configuration. A high-order adaptive time-integration has been used to solve the model. The predicted loop density and their average size is in good agreement with reported experimental observations for proton irradiated ThO2 at 600oC. The model did not predict void evolution due to the sluggish kinetics of cation vacancies, explaining the absence of voids in proton irradiated ThO2 (and other oxides) at relatively low temperatures.
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
Thermal Energy Transport in Oxide Nuclear Fuel
Authors:
David H. Hurley,
Anter El-Azab,
Matthew S. Bryan,
Michael W. D. Cooper,
Cody A. Dennett,
Krzysztof Gofryk,
Lingfeng He,
Marat Khafizov,
Gerard H. Lander,
Michael E. Manley,
J. Matthew Mann,
Chris A. Marianetti,
Karl Rickert,
Farida A. Selim,
Michael R. Tonks,
Janelle P. Wharry
Abstract:
To efficiently capture the energy of the nuclear bond, advanced nuclear reactor concepts seek solid fuels that must withstand unprecedented temperature and radiation extremes. In these advanced fuels, thermal energy transport under irradiation is directly related to reactor performance as well as reactor safety. The science of thermal transport in nuclear fuel is a grand challenge due to both comp…
▽ More
To efficiently capture the energy of the nuclear bond, advanced nuclear reactor concepts seek solid fuels that must withstand unprecedented temperature and radiation extremes. In these advanced fuels, thermal energy transport under irradiation is directly related to reactor performance as well as reactor safety. The science of thermal transport in nuclear fuel is a grand challenge due to both computational and experimental complexities. Here, we provide a comprehensive review of thermal transport research on two actinide oxides: one currently in use in commercial nuclear reactors, uranium dioxide (UO2), and one advanced fuel candidate material, thorium dioxide (ThO2). In both materials, heat is carried by lattice waves or phonons. Crystalline defects caused by fission events effectively scatter phonons and lead to a degradation in fuel performance over time. Bolstered by new computational and experimental tools, researchers are now develo** the foundational work necessary to accurately model and ultimately control thermal transport in advanced nuclear fuel. We begin by reviewing research aimed at understanding thermal transport in perfect single crystals. The absence of defects enables studies that focus on the fundamental aspects of phonon transport. Next, we review research that targets defect generation and evolution. Here, the focus is on ion irradiation studies used as surrogates for damage caused by fission products. We end this review with a discussion of modeling and experimental efforts directed at predicting and validating mesoscale thermal transport in the presence of irradiation defects. While efforts into these research areas have been robust, challenging work remains in develo** holistic tools to capture and predict thermal energy transport across widely varying environmental conditions.
△ Less
Submitted 27 April, 2022;
originally announced April 2022.
-
A generalized 3D elastic model for nanoscale, self-assembled oxide-metal thin films with pillar-in-matrix configurations
Authors:
Kyle Starkey,
Ahmad Ahmad,
Juanjuan Lu,
Haiyan Wang,
Anter El-Azab
Abstract:
In recent years, functional oxide-metal based vertically aligned nanocomposite (VAN) thin films have gained interest due to their intriguing physical properties and multifunctionalities stemming from the complex interactions between the two phases in the film and the substrate. In this work, we develop a model for studying the energetics of these thin film systems, including the effects of both la…
▽ More
In recent years, functional oxide-metal based vertically aligned nanocomposite (VAN) thin films have gained interest due to their intriguing physical properties and multifunctionalities stemming from the complex interactions between the two phases in the film and the substrate. In this work, we develop a model for studying the energetics of these thin film systems, including the effects of both lattice mismatch and capillary forces due to interface curvature. Each phase is incorporated into the model using a phase indicator function, and we introduce the capillary forces as body forces using a vector density representation of the interface. The model is implemented using the finite element method to study the deformation of the thin film which is composed of Au nanopillars embedded in a La0.7Sr0.3MnO3 (LSMO) matrix on an SrTiO3 (STO) substrate. The results suggest that the total energy is lowest for random configurations of pillars compared to ordered square and hexagonal lattice configurations, consistent with the random distribution of pillars found in experiments. Furthermore, we find that the interfacial energy dominates the total energy of each configuration, suggesting that interfacial energy in the system is an important design parameter for nanocomposite growth, along with the lattice mismatch.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Crystal plasticity-inspired statistical analysis of dislocation substructures generated by continuum dislocation dynamics
Authors:
Peng Lin,
Vignesh Vivekanandan,
Gustavo Castelluccio,
Benjamin Anglin,
Anter El-Azab
Abstract:
A computational approach has been developed for analyzing the characteristics of 3D dislocation substructures generated by the vector-density based continuum dislocation dynamics (CDD). In this CDD framework, the dislocation density on the individual slip systems is represented by vector fields with a unique dislocation line direction at each point in space. The evolution of these density fields i…
▽ More
A computational approach has been developed for analyzing the characteristics of 3D dislocation substructures generated by the vector-density based continuum dislocation dynamics (CDD). In this CDD framework, the dislocation density on the individual slip systems is represented by vector fields with a unique dislocation line direction at each point in space. The evolution of these density fields is governed by a set of transport equations coupled with crystal mechanics. Such a detailed picture of the dislocation system enables mesoscale plasticity simulations based on dislocation properties. Here, a computational approach based on streamline construction is proposed to obtain the characteristics of dislocation substructures generated by CDD. Streamlines are obtained by travelling along the tangent of the vector density and velocity fields of the dislocation system, and can be used to construct the dislocation lines and their paths in the deformed crystal in 3D. As explained in the text, the streamlines are computed by solving a set of partial differential equations. Here we use this approach to extract microstructure parameters from the CDD simulations that are relevant to substructure-sensitive crystal plasticity models. These parameters include the average mean free path and mobile dislocation segment length, as well as the dislocation wall volume fraction, and the corresponding distributions. The results show that both the mobile dislocation segment length and dislocation mean free path decrease with the applied strain, which is consistent with the models used in the literature, and that the mobile dislocation segment length follows a log-normal distribution.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Discrete Dislocation Dynamics for Crystal RVEs. Part 1: Periodic Loop Kinematics
Authors:
Yash Pachaury,
Giacomo Po,
Anter El-Azab
Abstract:
A novel implementation of the dislocation flux boundary condition in discrete dislocation dynamics is presented. The continuity of the individual dislocation loops in a periodic representative crystal volume (RVE) is enforced across the boundary of the RVE with the help of a dual topological description for representing dislocation line kinematics in two equivalent spaces representing the deformin…
▽ More
A novel implementation of the dislocation flux boundary condition in discrete dislocation dynamics is presented. The continuity of the individual dislocation loops in a periodic representative crystal volume (RVE) is enforced across the boundary of the RVE with the help of a dual topological description for representing dislocation line kinematics in two equivalent spaces representing the deforming crystal, the RVE and the unbounded crystal spaces. The former describes the motion of the dislocations in the simulated crystal RVE whereas the latter represents the motion of dislocations in an infinite space containing all replicas of the RVE. A map** between the two spaces forms the basis of the implementation of flux boundary condition. The implementation details are discussed in the context of statistical homogeneity of bulk crystals undergoing macroscopically homogeneous plastic deformation. Some test cases are presented and discussed to establish the proposed approach. It has been observed that the boundary nodes associated with dislocation segments bear no relevance in the motion of the dislocation segments from the standpoint of bulk crystal plasticity modeling throughout the deformation history of the crystal.
△ Less
Submitted 3 November, 2021; v1 submitted 22 February, 2021;
originally announced February 2021.
-
Incorporating point defect generation due to jog formation into the vector density-based continuum dislocation dynamics approach
Authors:
Peng Lin,
Vignesh Vivekanandan,
Benjamin Anglin,
Clint Geller,
Anter El-Azab
Abstract:
During plastic deformation of crystalline materials, point defects such as vacancies and interstitials are generated by jogs on moving dislocations. A detailed model for jog formation and transport during plastic deformation was developed within the vector density-based continuum dislocation dynamics framework (Lin and El-Azab, 2020; Xia and El-Azab, 2015). As a part of this model, point defect ge…
▽ More
During plastic deformation of crystalline materials, point defects such as vacancies and interstitials are generated by jogs on moving dislocations. A detailed model for jog formation and transport during plastic deformation was developed within the vector density-based continuum dislocation dynamics framework (Lin and El-Azab, 2020; Xia and El-Azab, 2015). As a part of this model, point defect generation associated with jog transport was formulated in terms of the volume change due to the non-conservative motion of jogs. Balance equations for the vacancies and interstitials including their rate of generation due to jog transport were also formulated. A two-way coupling between point defects and dislocation dynamics was then completed by including the stress contributed by the eigen-strain of point defects. A jog drag stress was further introduced into the mobility law of dislocations to account for the energy dissipation during point defects generation. A number of test problems and a fully coupled simulation of dislocation dynamics and point defect generation and diffusion were performed. The results show that there is an asymmetry of vacancy and interstitial generation due to the different formation energies of the two types of defects. The results also show that a higher hardening rate and a higher dislocation density are obtained when the point defect generation mechanism is coupled to dislocation dynamics.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
On the computational solution of vector-density based continuum dislocation dynamics models: a comparison of two plastic distortion and stress update algorithms
Authors:
Peng Lin,
Vignesh Vivekanandan,
Kyle Starkey,
Benjamin Anglin,
Clint Geller,
Anter El-Azab
Abstract:
Continuum dislocation dynamics models of mesoscale plasticity consist of dislocation transport-reaction equations coupled with crystal mechanics equations. The coupling between these two sets of equations is such that dislocation transport gives rise to the evolution of plastic distortion (strain), while the evolution of the latter fixes the stress from which the dislocation velocity field is foun…
▽ More
Continuum dislocation dynamics models of mesoscale plasticity consist of dislocation transport-reaction equations coupled with crystal mechanics equations. The coupling between these two sets of equations is such that dislocation transport gives rise to the evolution of plastic distortion (strain), while the evolution of the latter fixes the stress from which the dislocation velocity field is found via a mobility law. Earlier solutions of these equations employed a staggered solution scheme for the two sets of equations in which the plastic distortion was updated via time integration of its rate, as found from Orowan's law. In this work, we show that such a direct time integration scheme can suffer from accumulation of numerical errors. We introduce an alternative scheme based on field dislocation mechanics that ensures consistency between the plastic distortion and the dislocation content in the crystal. The new scheme is based on calculating the compatible and incompatible parts of the plastic distortion separately, and the incompatible part is calculated from the current dislocation density field. Stress field and dislocation transport calculations were implemented within a finite element based discretization of the governing equations, with the crystal mechanics part solved by a conventional Galerkin method and the dislocation transport equations by the least squares method. A simple test is first performed to show the accuracy of the two schemes for updating the plastic distortion, which shows that the solution method based on field dislocation mechanics is more accurate. This method then was used to simulate an austenitic steel crystal under uniaxial loading and multiple slip conditions.
△ Less
Submitted 8 February, 2021;
originally announced February 2021.
-
On the implementation of dislocation reactions in continuum dislocation dynamics modeling of mesoscale plasticity
Authors:
Vignesh Vivekanandan,
Peng Lin,
Grethe Winther,
Anter El-Azab
Abstract:
The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocat…
▽ More
The continuum dislocation dynamics framework for mesoscale plasticity is intended to capture the dislocation density evolution and the deformation of crystals when subjected to mechanical loading. It does so by solving a set of transport equations for dislocations concurrently with crystal mechanics equations, with the latter being cast in the form of an eigenstrain problem. Incorporating dislocation reactions in the dislocation transport equations is essential for making such continuum dislocation dynamics predictive. A formulation is proposed to incorporate dislocation reactions in the transport equations of the vector density-based continuum dislocation dynamics. This formulation aims to rigorously enforce dislocation line continuity using the concept of virtual dislocations that close all dislocation loops involved in cross slip, annihilation, and glissile and sessile junction reactions. The addition of virtual dislocations enables us to accurately enforce the divergence free condition upon the numerical solution of the dislocation transport equations for all slip systems individually. A set of tests were performed to illustrate the accuracy of the formulation and the solution of the transport equations within the vector density-based continuum dislocation dynamics. Comparing the results from these tests with an earlier approach in which the divergence free constraint was enforced on the total dislocation density tensor or the sum of two densities when only cross slip is considered shows that the new approach yields highly accurate results. Bulk simulations were performed for a face centered cubic crystal based on the new formulation and the results were compared with discrete dislocation dynamics predictions of the same. The microstructural features obtained from continuum dislocation dynamics were also analyzed with reference to relevant experimental observations.
△ Less
Submitted 20 November, 2020; v1 submitted 29 October, 2020;
originally announced October 2020.
-
On the three-dimensional spatial correlations of curved dislocation systems
Authors:
Joseph Anderson,
Anter El-Azab
Abstract:
Coarse-grained descriptions of dislocation motion in crystalline metals inherently represent a loss of information regarding dislocation-dislocation interactions. In the present work, we consider a coarse-graining framework capable of re-capturing these interactions by means of the dislocation-dislocation correlation functions. The framework depends on a coarse-graining length to define slip-syste…
▽ More
Coarse-grained descriptions of dislocation motion in crystalline metals inherently represent a loss of information regarding dislocation-dislocation interactions. In the present work, we consider a coarse-graining framework capable of re-capturing these interactions by means of the dislocation-dislocation correlation functions. The framework depends on a coarse-graining length to define slip-system-specific dislocation densities. Following a statistical definition of this coarse-graining process, we define a spatial correlation function which will allow relative positions of dislocation pairs, and thus the strength of their interactions at short range, to be recaptured into a mean field description of dislocation dynamics. Through a statistical homogeneity argument, we present a method of evaluating this correlation function from discrete dislocation dynamics simulations. Finally, results of this evaluation are shown in the form of self-correlation of dislocation densities on the same slip-system. These correlation functions are seen to depend weakly on plastic strain (and, in turn, the total dislocation density), but are seen to depend strongly on the coarse-graining length. Implications of these correlation functions in regard to continuum dislocation dynamics as well as future directions of investigation are also discussed.
△ Less
Submitted 17 December, 2020; v1 submitted 19 June, 2020;
originally announced June 2020.
-
Peak intrinsic thermal conductivity in non-metallic solids and new interpretation of experimental data for argon
Authors:
Ahmed Hamed,
Anter El-Azab
Abstract:
The inelastic nature of 3-phonon processes is investigated within the framework of perturbation theory and linearized Boltzmann Transport Equation. By considering the energy conservation rule governing this type of interactions in a statistical average sense, the impact of different forms of the regularized energy-conserving Dirac delta function on 3-phonon scattering rates was evaluated. Striking…
▽ More
The inelastic nature of 3-phonon processes is investigated within the framework of perturbation theory and linearized Boltzmann Transport Equation. By considering the energy conservation rule governing this type of interactions in a statistical average sense, the impact of different forms of the regularized energy-conserving Dirac delta function on 3-phonon scattering rates was evaluated. Strikingly, adopting Lorentz distribution, in accordance with the shape of eigenenergy broadening of phonon normal modes due to the leading term of crystal anharmonicity, was found to play a critical role in activating umklapp processes at low temperature, leading to intrinsic lattice thermal conductivity peak at finite temperature for perfect crystal. This characteristic behavior, unique to the Lorentzian, lays foundation for develo** adjustable-parameter-free computational models for reliable prediction of the finite lattice conductivity at low temperature, even in the absence of extrinsic scattering processes. An iterative solution scheme for Boltzmann Transport Equation was used to compute the intrinsic thermal conductivity of solid argon over the entire temperature range (2-80 K). For the first time, the experimentally observed $T^2$ behavior in the low temperature, $T$, limit and the peak temperature (~ 8 K) were successfully recovered, in addition to the classical high temperature $T^{-1}$ behavior above 20 K by the sole use of 3-phonon processes. The good agreement with experiment indicates that phonon-phonon interactions dominate over the entire temperature range in argon, contrary to previous hypotheses that phonon-defect scattering dominates the sub-peak regime. Anisotropy in thermal conductivity of single crystal at low temperature due to phonon focusing was observed. In addition, argon conductivity is underestimated by an order of magnitude in Single Mode Relaxation Time approximation.
△ Less
Submitted 6 September, 2017;
originally announced September 2017.