-
Fully printed flexible perovskite solar modules with improved energy alignment by tin oxide surface modification
Authors:
Lirong Dong,
Shudi Qiu,
Jose Garcia Cerrillo,
Michael Wagner,
Olga Kasian,
Sarmad Feroze,
Dongju Jang,
Chaohui Li,
Vincent M. Le Corre,
Kaicheng Zhang,
Heiko Peisert,
Felix U Kosasih,
Charline Arrive,
Tian Du,
Fu Yang,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in ind…
▽ More
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in industrial production. Here, a fullerene-substituted alkylphosphonic acid dipole layer is introduced between the R2R-printed tin oxide electron transport layer and the perovskite active layer to reduce the energetic barrier and to suppress surface recombination at the buried interface. The resulting f-PSCs exhibit a PCE of 17.0% with negligible hysteresis, retain 95% of their initial PCE over 3000 bending cycles and achieve a T95 lifetime of 1200 h under 1 sun and 65 degreeC in nitrogen atmosphere. Moreover, the fully printed flexible perovskite solar mini-modules (f-PSMs) with a 20.25 cm2 aperture area achieve a PCE of 11.6%. The encapsulated f-PSMs retain 90% of their initial PCE after 500 h damp-heat testing at 65 degreeC and 85% relative humidity (ISOS-D3). This work marks an important progress toward the realization of efficient and stable flexible perovskite photovoltaics for commercialization.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Simulation of perovskite thin layer crystallization with varying evaporation rates
Authors:
M. Majewski,
S. Qiu,
O. Ronsin,
L. Lüer,
V. M. Le Corre,
T. Du,
C. J. Brabec,
H. -J. Egelhaaf,
J. Harting
Abstract:
Perovskite solar cells (PSC) are promising potential competitors to established photovoltaic technologies due to their superior efficiency and low-cost solution processability. However, the limited understanding of the crystallization behaviour hinders the technological transition from lab-scale cells to modules. In this work, we perform Phase Field (PF) simulations of the doctor-bladed film forma…
▽ More
Perovskite solar cells (PSC) are promising potential competitors to established photovoltaic technologies due to their superior efficiency and low-cost solution processability. However, the limited understanding of the crystallization behaviour hinders the technological transition from lab-scale cells to modules. In this work, we perform Phase Field (PF) simulations of the doctor-bladed film formation to obtain mechanistic and morphological information that is experimentally challenging to access. PF simulations are validated extensively using in- and ex-situ experiments for different solvent evaporation rates. The well-known transition from a film with many pinholes, for a low evaporation rate, to a smooth film, for high evaporation rates, is recovered in simulation and experiment. From the simulation, the transition can be assigned to the change in the ratio of evaporation to crystallization rate because of two distinct mechanisms. Firstly, for larger evaporation rates, nuclei appear at higher concentrations, which favors nucleation as compared to growth. Secondly, the growth of the crystals is confined in a thinner film, which limits their vertical size. Both effects are expected to be valid independent of the specific chemistry of the chosen experimental system, as long as the evaporation time of the solvent is comparable to the crystallization time.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
On the theoretical framework for meniscus-guided manufacturing of large-area OPV modules
Authors:
Fabian Gumpert,
Annika Janßen,
Robin Basu,
Christoph J. Brabec,
Hans-Joachim Egelhaaf,
Jan Lohbreier,
Andreas Distler
Abstract:
For the manufacturing of thin films of solution-processable organic semiconductors, e.g. for organic photovoltaics (OPV), meniscus guided-coating techniques are the method of choice for large-scale industrial applications. However, the process requires an in-depth understanding of the respective fluid dynamics to control the resulting film thickness. In this article, we derive an analytical expres…
▽ More
For the manufacturing of thin films of solution-processable organic semiconductors, e.g. for organic photovoltaics (OPV), meniscus guided-coating techniques are the method of choice for large-scale industrial applications. However, the process requires an in-depth understanding of the respective fluid dynamics to control the resulting film thickness. In this article, we derive an analytical expression to describe the layer thickness of coatings manufactured with a trapezoidal-shaped applicator as a function of various fluid and process parameters. The analytical calculations are compared with results from computational fluid dynamics (CFD) simulations and experimental data for an industrially relevant OPV active material system. The analytical calculations are compared with results from computational fluid dynamics (CFD) simulations and experimental data for an industrially relevant OPV active material system. The good agreement of all three approaches demonstrates the potential of the analytical and simulative methods to reduce time- and resource-consuming experiments to a minimum. Furthermore, our theoretical model can be used to enhance the homogeneity of large-area coatings by means of an acceleration profile of the applicator that can compensate the liquid loss during the coating process. The respective analytical expression is validated by simulated and experimentally obtained data for long-distance coatings. Finally, this approach is used to fabricate a large-area OPV module with new world record efficiency.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Guidelines for Material Design in Semitransparent Organic Solar Cells
Authors:
Karen Forberich,
Alessandro Troisi,
Chao Liu,
Michael Wagner,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Organic solar cells (OSCs) are uniquely suited for semitransparent applications due to their adjustable absorption spectrum. However, most high-performance semitransparent cells reported to date are based on materials that have shown high power conversion efficiency for opaque devices. We therefore present a model to assess the optimum efficiency and transparency for a specific donor and acceptor…
▽ More
Organic solar cells (OSCs) are uniquely suited for semitransparent applications due to their adjustable absorption spectrum. However, most high-performance semitransparent cells reported to date are based on materials that have shown high power conversion efficiency for opaque devices. We therefore present a model to assess the optimum efficiency and transparency for a specific donor and acceptor band gap. The absorption characteristics of both donor and acceptor are modeled with spectral data of typical absorber materials from the literature which are adjusted to achieve the desired band gap value. The results show three distinct regions of high light utilization efficiency if the photopic curve is employed as a weighting function (corresponding to window applications), and a broad maximum for the plant action spectrum as a weighting function (corresponding to greenhouse applications). When comparing these findings to reported experimental values, it is evident that the band gaps of the materials used for the experimental studies do not correspond to the maxima identified by our simulation model. The analysis of the energy levels of molecules recorded in the literature confirms that all band gaps and therefore all LUE maxima are chemically feasible so that the performance of semitransparent OSCs can be further improved by designing materials with optimized absorption spectra.
△ Less
Submitted 11 November, 2023;
originally announced November 2023.
-
Matching the photocurrent of perovskite/organic tandem solar modules by varying the cell width
Authors:
Jose Garcia Cerrillo,
Andreas Distler,
Fabio Matteocci,
Karen Forberich,
Michael Wagner,
Robin Basu,
Luigi Angelo Castriotta,
Farshad Jafarzadeh,
Francesca Brunetti,
Fu Yang,
Ning Li,
Asiel Neftali Corpus Mendoza,
Aldo Di Carlo,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the c…
▽ More
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the cell width, whose modification can be readily realized by the adjustment of the module layout. Herein we demonstrate this concept at the experimental level for the first time for a 2T-mechanically stacked perovskite (FAPbBr3)/organic (PM6:Y6:PCBM) tandem mini-module, an unprecedented approach for these emergent photovoltaic technologies fabricated in an independent manner. An excellent Isc matching is achieved by tuning the cell widths of the perovskite and organic modules to 7.22 mm (PCEPVKT-mod= 6.69%) and 3.19 mm (PCEOPV-mod= 12.46%), respectively, leading to a champion efficiency of 14.94% for the tandem module interconnected in series with an aperture area of 20.25 cm2. Rather than demonstrating high efficiencies at the level of small lab cells, our successful experimental proof-of-concept at the module level proves to be particularly useful to couple devices with non-complementary semiconductors, either in series or in parallel electrical connection, hence overcoming the limitations imposed by the monolithic structure.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
A phase-field model for the evaporation of thin film mixtures
Authors:
Olivier J. J. Ronsin,
DongJu Jang,
Hans-Joachim Egelhaaf,
Christoph J. Brabec,
Jens Harting
Abstract:
The performance of solution-processed solar cells strongly depends on the geometrical structure and roughness of the photovoltaic layers formed during film drying. During the drying process, the interplay of crystallization and liquid-liquid demixing leads to the structure formation on the nano- and microscale and to the final rough film. In order to better understand how the film structure can be…
▽ More
The performance of solution-processed solar cells strongly depends on the geometrical structure and roughness of the photovoltaic layers formed during film drying. During the drying process, the interplay of crystallization and liquid-liquid demixing leads to the structure formation on the nano- and microscale and to the final rough film. In order to better understand how the film structure can be improved by process engineering, we aim at theoretically investigating these systems by means of phase-field simulations. We introduce an evaporation model based on the Cahn-Hilliard equation for the evolution of the fluid concentrations coupled to the Allen-Cahn equation for the liquid-vapour phase transformation. We demonstrate its ability to match the experimentally measured drying kinetics and study the impact of the parameters of our model. Furthermore, the evaporation of solvent blends and solvent-vapour annealing are investigated. The dry film roughness emerges naturally from our set of equations, as illustrated through preliminary simulations of spinodal decomposition and film drying on structured substrates.
△ Less
Submitted 3 March, 2020; v1 submitted 15 January, 2020;
originally announced January 2020.
