-
Lifetime predictions for virgin and recycled high-density polyethylene under creep conditions
Authors:
A. D. Drozdov,
R. Hoj Jermiin,
J. deClaville Christiansen
Abstract:
Recycling has become a predominant subject in industry and science due to a rising concern for the environment driven by high production volume of plastics. Replacement of virgin polymers with their recycled analogs is not always possible because recycled polymers cannot met the same property profiles as their virgin counterparts. To avoid deterioration of the mechanical properties, it is proposed…
▽ More
Recycling has become a predominant subject in industry and science due to a rising concern for the environment driven by high production volume of plastics. Replacement of virgin polymers with their recycled analogs is not always possible because recycled polymers cannot met the same property profiles as their virgin counterparts. To avoid deterioration of the mechanical properties, it is proposed to replace a virgin polymer with a recycled polymer of another grade whose characteristics (measured in tensile tests) are close to those of the virgin material. This approach opens a way for the use of recycled polymers in short-term application, but its suitability for long-term applications has not yet been assessed. A thorough experimental investigation is conducted of the mechanical response of virgin high-density polyethylene (HDPE) used for insulation of pipes and recycled HDPE manufactured from post-consumer plastic waste (their stiffness, strength and elongation to break adopt similar values). A model is presented in viscoelastoplasticity of semicrystalline polymers. Its parameters are determined by matching experimental data in short-term relaxation and creep tests. The lifetime of virgin and recycled HDPE under creep conditions is evaluated by means of numerical simulation. It is shown that the stress-time to failure diagrams for virgin and recycled HDPE practically coincide.
△ Less
Submitted 16 April, 2024;
originally announced April 2024.
-
Rheology of Polydisperse non-Spherical Graphite Particles Suspended in Mineral Oil
Authors:
Th. Larsen,
A. L. Søbye,
J. R. Royer,
W. C. K. Poon,
T. Larsen,
S. J. Andreasen,
A. D. Drozdov,
J. D. C. Christiansen
Abstract:
We study the role of filler concentration and microphysics on the rheology of polydisperse flake-graphite particles suspended in Newtonian mineral oil. Under steady shear, our samples exhibit shear thinning and yielding behaviour is observed for volume fractions $φ> 0.18$. Time-temperature superposition was observed using an Arrhenius-type horizontal shift factor, giving a flow activation energy t…
▽ More
We study the role of filler concentration and microphysics on the rheology of polydisperse flake-graphite particles suspended in Newtonian mineral oil. Under steady shear, our samples exhibit shear thinning and yielding behaviour is observed for volume fractions $φ> 0.18$. Time-temperature superposition was observed using an Arrhenius-type horizontal shift factor, giving a flow activation energy that is dependent on the graphite volume fraction, suggesting concentration-dependent contributions to relaxation processes in the suspensions. The flow curves are fitted by a constraint-based model, indicating that the flow behaviour is controlled by frictional and adhesive contacts, with the model suggesting that the adhesive stress is temperature dependent.
△ Less
Submitted 26 October, 2022; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Universal diamond edge Raman scale to 0.5 terapascal: The implication to metallization of hydrogen
Authors:
M. I. Eremets,
V. S. Minkov,
P. P. Kong,
A. P. Drozdov,
S. Chariton,
V. B. Prakapenka
Abstract:
The recent progress in generating static pressures up to terapascal values opens opportunities for studying novel materials with unusual properties, such as metallization of hydrogen and high-temperature superconductivity. However, an evaluation of pressure above ~0.3 terapascal is a challenge. We report a universal high-pressure scale up to ~0.5 terapascal, based on the shift of the Raman edge of…
▽ More
The recent progress in generating static pressures up to terapascal values opens opportunities for studying novel materials with unusual properties, such as metallization of hydrogen and high-temperature superconductivity. However, an evaluation of pressure above ~0.3 terapascal is a challenge. We report a universal high-pressure scale up to ~0.5 terapascal, based on the shift of the Raman edge of stressed diamond anvils correlated with the equation of state of Au and does not require an additional pressure sensor. According to the new scale, the pressure values are substantially lower by 20% at ~0.5 terapascal compared to the extrapolation of the existing scales. We compared the available data of H2 at the highest static pressures. We showed that the onset of the proposed metallization of molecular hydrogen reported by different groups is consistent when corrected with the new scale and can be compared with various theoretical predictions.
△ Less
Submitted 14 February, 2022;
originally announced February 2022.
-
High-temperature superconductivity in hydrides: experimental evidence and details
Authors:
M. I. Eremets,
V. S. Minkov,
A. P. Drozdov,
P. P. Kong,
V. Ksenofontov,
S. I. Shylin,
S. L. Bud ko,
R. Prozorov,
F. F. Balakirev,
Dan Sun,
S. Mozaffari,
L. Balicas
Abstract:
Since the discovery of superconductivity at 200 K in H3S [1] similar or higher transition temperatures, Tcs, have been reported for various hydrogen-rich compounds under ultra-high pressures [2]. Superconductivity was experimentally proved by different methods, including electrical resistance, magnetic susceptibility, optical infrared, and nuclear resonant scattering measurements. The crystal stru…
▽ More
Since the discovery of superconductivity at 200 K in H3S [1] similar or higher transition temperatures, Tcs, have been reported for various hydrogen-rich compounds under ultra-high pressures [2]. Superconductivity was experimentally proved by different methods, including electrical resistance, magnetic susceptibility, optical infrared, and nuclear resonant scattering measurements. The crystal structures of superconducting phases were determined by X-ray diffraction. Numerous electrical transport measurements demonstrate the typical behaviour of a conventional phonon-mediated superconductor: zero resistance below Tc, the shift of Tc to lower temperatures under external magnetic fields, and pronounced isotope effect. Remarkably, the results are in good agreement with the theoretical predictions, which describe superconductivity in hydrides within the framework of the conventional BCS theory. However, despite this acknowledgment, experimental evidence for the superconducting state in these compounds has recently been treated with criticism [3, 4], which apparently stems from misunderstanding and misinterpretation of complicated experiments performed under very high pressures. Here, we describe in greater detail the experiments revealing high-temperature superconductivity in hydrides under high pressures. We show that the arguments against superconductivity [3, 4] can be either refuted or explained. The experiments on the high-temperature superconductivity in hydrides clearly contradict the theory of hole superconductivity [4] and eliminate it [3].
△ Less
Submitted 13 January, 2022;
originally announced January 2022.
-
Raman and infrared studies of CdSe/CdS core/shell nanoplatelets
Authors:
Alexander I. Lebedev,
Bedil M. Saidzhonov,
Konstantin A. Drozdov,
Andrey A. Khomich,
Roman B. Vasiliev
Abstract:
The vibrational spectroscopy of semiconductor nanostructures can provide important information on their structure. In this work, experimental Raman and infrared spectra are compared with vibrational spectra of CdSe/CdS core/shell nanoplatelets calculated from first principles using the density functional theory. The calculations confirm the two-mode behavior of phonon spectra of nanostructures. An…
▽ More
The vibrational spectroscopy of semiconductor nanostructures can provide important information on their structure. In this work, experimental Raman and infrared spectra are compared with vibrational spectra of CdSe/CdS core/shell nanoplatelets calculated from first principles using the density functional theory. The calculations confirm the two-mode behavior of phonon spectra of nanostructures. An analysis of the experimental spectra reveals the absence of modes with a high amplitude of vibrations of surface atoms, which indicates their strong dam**. Taking into account the difference in the dam** of different modes and their calculated intensities, all bands in the spectra are unambiguously identified. It is found that the frequencies of longitudinal optical modes in heterostructures are close to the frequencies of LO phonons in bulk strained constituents, whereas the frequencies of transverse modes can differ significantly from those of the corresponding TO phonons. It is shown that an anomalous thickness dependence of CdS TO mode is due to a noticeable surface relaxation of the outer Cd layer in the nanostructure.
△ Less
Submitted 12 December, 2021;
originally announced December 2021.
-
Infrared imaging of samples in ultra high pressure diamond anvil cells
Authors:
Tarun Patel,
A. Drozdov,
V. S. Minkov,
M. I. Eremets,
E. J. Nicol,
J. P. Carbotte,
T. Timusk,
A. W. Tsen
Abstract:
We describe an experimental platform that generates infrared images of micrometer-sized samples in the high pressure region of a diamond anvil cell. Using a 2.3 micron laser as a source of radiation, the system will be particularly useful in identifying hydride superconductors which exhibit an anomalous temperature dependence of reflectivity in the 2.3 micron region. Our system shows an intensity…
▽ More
We describe an experimental platform that generates infrared images of micrometer-sized samples in the high pressure region of a diamond anvil cell. Using a 2.3 micron laser as a source of radiation, the system will be particularly useful in identifying hydride superconductors which exhibit an anomalous temperature dependence of reflectivity in the 2.3 micron region. Our system shows an intensity stability within one percent when the sample temperature is swept from 100 K to 300 K. The spatial stability is of the order of a few micrometers in the same temperature range.
△ Less
Submitted 26 October, 2021;
originally announced October 2021.
-
Metallization of hydrogen
Authors:
M. I. Eremets,
P. P. Kong,
A. P. Drozdov
Abstract:
In previous work,1 we showed that hydrogen metallizes in phase III at temperatures below ~200 K and at pressures near ~350 GPa. Here, we perform a detailed study of electrical conductivity R(T) in phase III over a pressure range of 200-400 GPa and a temperature range of 80-300 K, and we show that hydrogen transforms from a semiconducting to a metallic state already at ~315 GPa. This transformation…
▽ More
In previous work,1 we showed that hydrogen metallizes in phase III at temperatures below ~200 K and at pressures near ~350 GPa. Here, we perform a detailed study of electrical conductivity R(T) in phase III over a pressure range of 200-400 GPa and a temperature range of 80-300 K, and we show that hydrogen transforms from a semiconducting to a metallic state already at ~315 GPa. This transformation is also supported by Raman spectroscopy: the Raman signal intensity decreases with pressure in accordance with the appearance and increase of electrical conductivity. Moreover, the Raman and electrical measurements yield the same boundary between the hydrogen phases III and V.
△ Less
Submitted 22 September, 2021;
originally announced September 2021.
-
Superconductivity up to 243 K in yttrium hydrides under high pressure
Authors:
P. P. Kong,
V. S. Minkov,
M. A. Kuzovnikov,
S. P. Besedin,
A. P. Drozdov,
S. Mozaffari,
L. Balicas,
F. F. Balakirev,
V. B. Prakapenka,
E. Greenberg,
D. A. Knyazev,
M. I. Eremets
Abstract:
The discovery of high-temperature conventional superconductivity in H3S with a critical temperature of Tc=203 K was followed by the recent record of Tc ~250 K in the face-centered cubic (fcc) lanthanum hydride LaH10 compound. It was realized in a new class of hydrogen-dominated compounds having a clathrate-like crystal structure in which hydrogen atoms form a 3D framework and surround a host atom…
▽ More
The discovery of high-temperature conventional superconductivity in H3S with a critical temperature of Tc=203 K was followed by the recent record of Tc ~250 K in the face-centered cubic (fcc) lanthanum hydride LaH10 compound. It was realized in a new class of hydrogen-dominated compounds having a clathrate-like crystal structure in which hydrogen atoms form a 3D framework and surround a host atom of rare earth elements. Yttrium hydrides are predicted to have even higher Tc exceeding room temperature. In this paper, we synthesized and refined the crystal structure of new hydrides: YH4, YH6, and YH9 at pressures up to 237 GPa finding that YH4 crystalizes in the I4/mmm lattice, YH6 in Im-3m lattice and YH9 in P63/mmc lattice in excellent agreement with the calculations. The observed very high-temperature superconductivity is comparable to that found in fcc-LaH10: the pressure dependence of Tc for YH9 also displays a "dome like shape" with the highest Tc of 243 K at 201 GPa. We also observed a Tc of 227 K at 237 GPa for the YH6 phase. However, the measured Tcs are notably lower by ~30 K than predicted. Evidence for superconductivity includes the observation of zero electrical resistance, a decrease of Tc under an external magnetic field and an isotope effect. The theoretically predicted fcc YH10 with the promising highest Tc>300 K was not stabilized in our experiments under pressures up to 237 GPa.
△ Less
Submitted 23 September, 2019;
originally announced September 2019.
-
Superconductivity at 250 K in lanthanum hydride under high pressures
Authors:
A. P. Drozdov,
P. P. Kong,
V. S. Minkov,
S. P. Besedin,
M. A. Kuzovnikov,
S. Mozaffari,
L. Balicas,
F. Balakirev,
D. Graf,
V. B. Prakapenka,
E. Greenberg,
D. A. Knyazev,
M. Tkacz,
M. I. Eremets
Abstract:
The discovery of superconductivity at 203 K in H3S brought attention back to conventional superconductors whose properties can be described by the Bardeen-Cooper-Schrieffer (BCS) and the Migdal-Eliashberg theories. These theories predict that high, and even room temperature superconductivity (RTSC) is possible in metals possessing certain favorable parameters such as lattice vibrations at high fre…
▽ More
The discovery of superconductivity at 203 K in H3S brought attention back to conventional superconductors whose properties can be described by the Bardeen-Cooper-Schrieffer (BCS) and the Migdal-Eliashberg theories. These theories predict that high, and even room temperature superconductivity (RTSC) is possible in metals possessing certain favorable parameters such as lattice vibrations at high frequencies. However, these general theories do not suffice to predict real superconductors. New superconducting materials can be predicted now with the aid of first principles calculations based on Density Functional Theory (DFT). In particular, the calculations suggested a new family of hydrides possessing a clathrate structure, where the host atom (Ca, Y, La) is at the center of the cage formed by hydrogen atoms. For LaH10 and YH10 superconductivity, with critical temperatures Tc ranging between 240 and 320 K is predicted at megabar pressures. Here, we report superconductivity with a record Tc ~ 250 K within the Fm-3m structure of LaH10 at a pressure P ~ 170 GPa. We proved the existence of superconductivity at 250 K through the observation of zero-resistance, isotope effect, and the decrease of Tc under an external magnetic field, which suggests an upper critical magnetic field of 120 T at zero-temperature. The pressure dependence of the transition temperatures Tc (P) has a maximum of 250-252 K at the pressure of about 170 GPa. This leap, by ~ 50 K, from the previous Tc record of 203 K indicates the real possibility of achieving RTSC (that is at 273 K) in the near future at high pressures and the perspective of conventional superconductivity at ambient pressure.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Superconductivity at 215 K in lanthanum hydride at high pressures
Authors:
A. P. Drozdov,
V. S. Minkov,
S. P. Besedin,
P. P. Kong,
M. A. Kuzovnikov,
D. A. Knyazev,
M. I. Eremets
Abstract:
We synthesized lanthanum hydride (LaHx) by laser heating of lanthanum in hydrogen atmosphere at pressure P = 170 GPa. The sample shows a superconducting step at 209 K and 170 GPa and temperature dependence of resistance. By releasing the pressure to 150 GPa, the superconducting transition temperature Tc increases to 215 K - the record Tc. This finding supports a way of achieving Tc higher than the…
▽ More
We synthesized lanthanum hydride (LaHx) by laser heating of lanthanum in hydrogen atmosphere at pressure P = 170 GPa. The sample shows a superconducting step at 209 K and 170 GPa and temperature dependence of resistance. By releasing the pressure to 150 GPa, the superconducting transition temperature Tc increases to 215 K - the record Tc. This finding supports a way of achieving Tc higher than the one in H3S (203 K) in hydrides with sodalite-like structures, first proposed for CaH6 (Tc=245 K) and later for yttrium and lanthanum hydrides where higher, room temperature superconductivity is expected.
△ Less
Submitted 21 August, 2018;
originally announced August 2018.
-
Semimetallic molecular hydrogen at pressure above 350 GPa
Authors:
M. I. Eremets,
A. P. Drozdov,
P. P. Kong,
H. Wang
Abstract:
According to the theoretical predictions, insulating molecular hydrogen dissociates and transforms to an atomic metal at pressures P~370-500 GPa. In another scenario, the metallization first occurs in the 250-500 GPa pressure range in molecular hydrogen through overlap** of electronic bands. The calculations are not accurate enough to predict which option is realized. Here we show that at a pres…
▽ More
According to the theoretical predictions, insulating molecular hydrogen dissociates and transforms to an atomic metal at pressures P~370-500 GPa. In another scenario, the metallization first occurs in the 250-500 GPa pressure range in molecular hydrogen through overlap** of electronic bands. The calculations are not accurate enough to predict which option is realized. Here we show that at a pressure of ~360 GPa and temperatures <200 K the hydrogen starts to conduct, and that temperature dependence of the electrical conductivity is typical of a semimetal. The conductivity, measured up to 440 GPa, increases strongly with pressure. Raman spectra, measured up to 480 GPa, indicate that hydrogen remains a molecular solid at pressures up to 440 GPa, while at higher pressures the Raman signal vanishes, likely indicating further transformation to a good molecular metal or to an atomic state.
△ Less
Submitted 14 June, 2019; v1 submitted 17 August, 2017;
originally announced August 2017.
-
Elemental Phosphorus: structural and superconducting phase diagram under pressure
Authors:
José A. Flores-Livas,
Antonio Sanna,
Alexander P. Drozdov,
Lilia Boeri,
Gianni Profeta,
Mikhail Eremets,
Stefan Goedecker
Abstract:
Pressure-induced superconductivity and structural phase transitions in phosphorous (P) are studied by resistivity measurements under pressures up to 170 GPa and fully $ab-initio$ crystal structure and superconductivity calculations up to 350 GPa. Two distinct superconducting transition temperature (T$_{c}$) vs. pressure ($P$) trends at low pressure have been reported more than 30 years ago, and fo…
▽ More
Pressure-induced superconductivity and structural phase transitions in phosphorous (P) are studied by resistivity measurements under pressures up to 170 GPa and fully $ab-initio$ crystal structure and superconductivity calculations up to 350 GPa. Two distinct superconducting transition temperature (T$_{c}$) vs. pressure ($P$) trends at low pressure have been reported more than 30 years ago, and for the first time we are able to reproduce them and devise a consistent explanation founded on thermodynamically metastable phases of black-phosphorous. Our experimental and theoretical results form a single, consistent picture which not only provides a clear understanding of elemental P under pressure but also sheds light on the long-standing and unsolved $anomalous$ superconductivity trend. Moreover, at higher pressures we predict a similar scenario of multiple metastable structures which coexist beyond their thermodynamical stability range. Metastable phases of P experimentally accessible at pressures above 240 GPa should exhibit T$_{c}$'s as high as 15 K, i.e. three times larger than the predicted value for the ground-state crystal structure. We observe that all the metastable structures systematically exhibit larger transition temperatures than the ground-state ones, indicating that the exploration of metastable phases represents a promising route to design materials with improved superconducting properties.
△ Less
Submitted 16 March, 2017;
originally announced March 2017.
-
Comments on the claimed observation of the Wigner-Huntington Transition to Metallic Hydrogen
Authors:
M. I. Eremets,
A. P. Drozdov
Abstract:
In their recent work Dias and Silvera (Science 2017) claim to have observed the Wigner-Huntington transition of hydrogen to a metallic state (MH) at a pressure of 495 GPa at low temperatures. The evidence for this transition is based on a high electron carrier density deduced from a Drude free electron model fitted to the reflectivity of the sample. Based on our analysis of the reflectivity data w…
▽ More
In their recent work Dias and Silvera (Science 2017) claim to have observed the Wigner-Huntington transition of hydrogen to a metallic state (MH) at a pressure of 495 GPa at low temperatures. The evidence for this transition is based on a high electron carrier density deduced from a Drude free electron model fitted to the reflectivity of the sample. Based on our analysis of the reflectivity data we find no convincing evidence for metallic hydrogen in their published data. The pressure determination is also ambiguous - it should be ~630 GPa according to the presented Raman spectrum. For comparison, we present our own data on the observation of highly reflecting hydrogen at pressures of 350-400 GPa. The appearance of metallic reflectivity is accompanied with a finite electrical conductivity of the sample. We argue that the actual pressure in the experiment of Dias and Silvera is likely below 400 GPa. In this case the observed enhanced reflectivity would be related to the phase transformation to conductive state published in arXiv:1601.04479.
△ Less
Submitted 16 February, 2017;
originally announced February 2017.
-
Spectroscopy of H$_3$S: evidence of a new energy scale for superconductivity
Authors:
F. Capitani,
B. Langerome,
J. -B. Brubach,
P. Roy,
A. Drozdov,
M. I. Eremets,
E. J. Nicol,
J. P. Carbotte,
T. Timusk
Abstract:
The discovery of a superconducting phase in sulfur hydride under high pressure with a critical temperature above 200 K has provided a new impetus to the search for even higher $T_c$. Theory predicted and experiment confirmed that the phase involved is H$_3$S with Im-3m crystal structure. The observation of a sharp drop in resistance to zero at $T_c$, its downward shift with magnetic field and a Me…
▽ More
The discovery of a superconducting phase in sulfur hydride under high pressure with a critical temperature above 200 K has provided a new impetus to the search for even higher $T_c$. Theory predicted and experiment confirmed that the phase involved is H$_3$S with Im-3m crystal structure. The observation of a sharp drop in resistance to zero at $T_c$, its downward shift with magnetic field and a Meissner effect confirm superconductivity but the mechanism involved remains to be determined. Here, we provide a first optical spectroscopy study of this new superconductor. Experimental results for the optical reflectivity of H$_3$S, under high pressure of 150 GPa, for several temperatures and over the range 60 to 600 meV of photon energies, are compared with theoretical calculations based on Eliashberg theory using DFT results for the electron-phonon spectral density $α^2$F($Ω$). Two significant features stand out: some remarkably strong infrared active phonons at $\approx$ 160 meV and a band with a depressed reflectance in the superconducting state in the region from 450 meV to 600 meV. In this energy range, as predicted by theory, H$_3$S is found to become a better reflector with increasing temperature. This temperature evolution is traced to superconductivity originating from the electron-phonon interaction. The shape, magnitude, and energy dependence of this band at 150 K agrees with our calculations. This provides strong evidence of a conventional mechanism. However, the unusually strong optical phonon suggests a contribution of electronic degrees of freedom.
△ Less
Submitted 29 December, 2016; v1 submitted 20 December, 2016;
originally announced December 2016.
-
Low temperature phase diagram of hydrogen at pressures up to 380 GPa. A possible metallic phase at 360 GPa and 200 K
Authors:
M. I. Eremets,
I. A. Troyan,
A. P. Drozdov
Abstract:
Two new phases of hydrogen have been discovered at room temperature in Ref.1: phase IV above 220 GPa and phase V above ~270 GPa. In the present work we have found a new phase VI at P~360 GPa and T<200 K. This phase is likely metallic as follows from the featureless Raman spectra, a strong drop in resistance, and absence of a photoconductive response. We studied hydrogen at low temperatures with th…
▽ More
Two new phases of hydrogen have been discovered at room temperature in Ref.1: phase IV above 220 GPa and phase V above ~270 GPa. In the present work we have found a new phase VI at P~360 GPa and T<200 K. This phase is likely metallic as follows from the featureless Raman spectra, a strong drop in resistance, and absence of a photoconductive response. We studied hydrogen at low temperatures with the aid of Raman, infrared absorption, and electrical measurements at pressures up to 380 GPa, and have built a new phase diagram of hydrogen.
△ Less
Submitted 18 January, 2016;
originally announced January 2016.
-
Crystal Structure of 200 K-Superconducting Phase of Sulfur Hydride System
Authors:
Mari Einaga,
Masafumi Sakata,
Takahiro Ishikawa,
Katsuya Shimizu,
Mikhail Eremets,
Alexander Drozdov,
Ivan Troyan,
Naohisa Hirao,
Yasuo Ohishi
Abstract:
This article reports the experimentally clarified crystal structure of a recently discovered sulfur hydride in high temperature superconducting phase which has the highest critical temperature Tc over 200 K which has been ever reported. For understanding the mechanism of the high superconductivity, the information of its crystal structure is very essential. Herein we have carried out the simultane…
▽ More
This article reports the experimentally clarified crystal structure of a recently discovered sulfur hydride in high temperature superconducting phase which has the highest critical temperature Tc over 200 K which has been ever reported. For understanding the mechanism of the high superconductivity, the information of its crystal structure is very essential. Herein we have carried out the simultaneous measurements electrical resistance and synchrotron x-ray diffraction under high pressure, and clearly revealed that the hydrogen sulfide, H2S, decomposes to H3S and its crystal structure has body-centered cubic symmetry in the superconducting phase.
△ Less
Submitted 10 September, 2015;
originally announced September 2015.
-
Superconductivity above 100 K in PH3 at high pressures
Authors:
A. P. Drozdov,
M. I. Eremets,
I. A. Troyan
Abstract:
Following the recent discovery of very high temperature conventional superconductivity in sulfur hydride (critical temperature Tc of 203 K, Ref1) we searched for superconductivity in other hydrides and found that a covalent hydride phosphine (PH3) also exhibits a high Tc >100 K at pressure P > 200 GPa as determined from four-probe electrical measurements.
Following the recent discovery of very high temperature conventional superconductivity in sulfur hydride (critical temperature Tc of 203 K, Ref1) we searched for superconductivity in other hydrides and found that a covalent hydride phosphine (PH3) also exhibits a high Tc >100 K at pressure P > 200 GPa as determined from four-probe electrical measurements.
△ Less
Submitted 25 August, 2015;
originally announced August 2015.
-
Conventional superconductivity at 203 K at high pressures
Authors:
A. P. Drozdov,
M. I. Eremets,
I. A. Troyan,
V. Ksenofontov,
S. I. Shylin
Abstract:
A superconductor is a material that can conduct electricity with no resistance below its critical temperature (Tc). The highest Tc that has been achieved in cuprates1 is 133 K at ambient pressure2 and 164 K at high pressures3. As the nature of superconductivity in these materials has still not been explained, the prospects for a higher Tc are not clear. In contrast, the Bardeen-Cooper-Schrieffer (…
▽ More
A superconductor is a material that can conduct electricity with no resistance below its critical temperature (Tc). The highest Tc that has been achieved in cuprates1 is 133 K at ambient pressure2 and 164 K at high pressures3. As the nature of superconductivity in these materials has still not been explained, the prospects for a higher Tc are not clear. In contrast, the Bardeen-Cooper-Schrieffer (BCS) theory gives a guide for achieving high Tc and does not put bounds on Tc, all that is needed is a favorable combination of high frequency phonons, strong electron-phonon coupling, and a high density of states. These conditions can be fulfilled for metallic hydrogen and covalent compounds dominated by hydrogen4,5. Numerous calculations support this idea and predict Tc of 50-235 K for many hydrides6 but only moderate Tc=17 K has been observed experimentally7. Here we studied sulfur hydride8 where a Tc~80 K was predicted9. We found that it transforms to a metal at pressure ~90 GPa. With cooling superconductivity was found deduced from a sharp drop of the resistivity to zero and a decrease of Tc with magnetic field. The pronounce isotope shift of Tc in D2S is evidence of an electron-phonon mechanism of superconductivity that is consistent with the BCS scenario. The superconductivity has been confirmed by magnetic susceptibility measurements with Tc=203K. The high Tc superconductivity most likely is due to H3S which is formed from H2S under its decomposition under pressure. Even higher Tc, room temperature superconductivity, can be expected in other hydrogen-based materials since hydrogen atoms provide the high frequency phonon modes as well as the strong electron-phonon coupling.
△ Less
Submitted 26 June, 2015;
originally announced June 2015.
-
Conventional superconductivity at 190 K at high pressures
Authors:
A. P. Drozdov,
M. I. Eremets,
I. A. Troyan
Abstract:
The highest critical temperature of superconductivity Tc has been achieved in cuprates: 133 K at ambient pressure and 164 K at high pressures. As the nature of superconductivity in these materials is still not disclosed, the prospects for a higher Tc are not clear. In contrast the Bardeen-Cooper-Schrieffer (BCS) theory gives a clear guide for achieving high Tc: it should be a favorable combination…
▽ More
The highest critical temperature of superconductivity Tc has been achieved in cuprates: 133 K at ambient pressure and 164 K at high pressures. As the nature of superconductivity in these materials is still not disclosed, the prospects for a higher Tc are not clear. In contrast the Bardeen-Cooper-Schrieffer (BCS) theory gives a clear guide for achieving high Tc: it should be a favorable combination of high frequency phonons, strong coupling between electrons and phonons, and high density of states. These conditions can be fulfilled for metallic hydrogen and covalent hydrogen dominant compounds. Numerous followed calculations supported this idea and predicted Tc=100-235 K for many hydrides but only moderate Tc~17 K has been observed experimentally. Here we found that sulfur hydride transforms at P~90 GPa to metal and superconductor with Tc increasing with pressure to 150 K at ~200 GPa. This is in general agreement with recent calculations of Tc~80 K for H2S. Moreover we found superconductivity with Tc~190 K in a H2S sample pressurized to P>150 GPa at T>220 K. This superconductivity likely associates with the dissociation of H2S, and formation of SHn (n>2) hydrides. We proved occurrence of superconductivity by the drop of the resistivity at least 50 times lower than the copper resistivity, the decrease of Tc with magnetic field, and the strong isotope shift of Tc in D2S which evidences a major role of phonons in the superconductivity. H2S is a substance with a moderate content of hydrogen therefore high Tc can be expected in a wide range of hydrogen-contain materials. Hydrogen atoms seem to be essential to provide the high frequency modes in the phonon spectrum and the strong electron-phonon coupling.
△ Less
Submitted 1 December, 2014;
originally announced December 2014.
-
Scattering function for a self-avoiding polymer chain
Authors:
A. D. Drozdov
Abstract:
An explicit expression is derived for the scattering function of a self-avoiding polymer chain in a $d$-dimensional space. The effect of strength of segment interactions on the shape of the scattering function and the radius of gyration of the chain is studied numerically. Good agreement is demonstrated between experimental data on dilute solutions of several polymers and results of numerical si…
▽ More
An explicit expression is derived for the scattering function of a self-avoiding polymer chain in a $d$-dimensional space. The effect of strength of segment interactions on the shape of the scattering function and the radius of gyration of the chain is studied numerically. Good agreement is demonstrated between experimental data on dilute solutions of several polymers and results of numerical simulation.
△ Less
Submitted 6 February, 2005;
originally announced February 2005.
-
Non-entropic theory of rubber elasticity: flexible chains with weak excluded-volume interactions
Authors:
A. D. Drozdov
Abstract:
Strain energy density is calculated for a network of flexible chains with weak excluded-volume interactions (whose energy is small compared with thermal energy). Constitutive equations are developed for an incompressible network of chains with segment interactions at finite deformations. These relations are applied to the study of uniaxial and equi-biaxial tension (compression), where the stress…
▽ More
Strain energy density is calculated for a network of flexible chains with weak excluded-volume interactions (whose energy is small compared with thermal energy). Constitutive equations are developed for an incompressible network of chains with segment interactions at finite deformations. These relations are applied to the study of uniaxial and equi-biaxial tension (compression), where the stress--strain diagrams are analyzed numerically. It is demonstrated that intra-chain interactions (i) cause an increase in the Young's modulus of the network and (ii) induce the growth of stresses (compared to an appropriate network of Gaussian chains), which becomes substantial at relatively large elongation ratios. The effect of excluded-volume interactions on the elastic response strongly depends on the deformation mode, in particular, it is more pronounced at equi-biaxial tension than at uniaxial elongation.
△ Less
Submitted 30 August, 2004;
originally announced August 2004.
-
Non-entropic theory of rubber elasticity: flexible chains grafted on a rigid surface
Authors:
A. D. Drozdov
Abstract:
The elastic response is studied of a single flexible chain grafted on a rigid plane and an ensemble of non-interacting tethered chains. It is demonstrated that the entropic theory of rubber elasticity leads to conclusions that disagree with experimental data. A modification of the conventional approach is proposed, where the end-to-end distribution function (treated as the governing parameter) i…
▽ More
The elastic response is studied of a single flexible chain grafted on a rigid plane and an ensemble of non-interacting tethered chains. It is demonstrated that the entropic theory of rubber elasticity leads to conclusions that disagree with experimental data. A modification of the conventional approach is proposed, where the end-to-end distribution function (treated as the governing parameter) is replaced by the average energy of a chain. It is revealed that this refinement ensures an adequate description of the mechanical behavior of flexible chains. Results of numerical simulation are compared with observations on uniaxial compression of a layer of grafted chains, and an acceptable agreement is shown between the model predictions and the experimental data. Based on the analysis of combined compression and shear, a novel micro-mechanism is proposed for the reduction of friction of polymer melts at rigid walls.
△ Less
Submitted 22 August, 2004;
originally announced August 2004.
-
Stiffness of polymer chains
Authors:
A. D. Drozdov
Abstract:
A formula is derived for stiffness of a polymer chain in terms of the distribution function of end-to-end vectors. This relationship is applied to calculate the stiffness of Gaussian chains (neutral and carrying electric charges at the ends), chains modeled as self-avoiding random walks, as well as semi-flexible (worm-like and Dirac) chains. The effects of persistence length and Bjerrum's length…
▽ More
A formula is derived for stiffness of a polymer chain in terms of the distribution function of end-to-end vectors. This relationship is applied to calculate the stiffness of Gaussian chains (neutral and carrying electric charges at the ends), chains modeled as self-avoiding random walks, as well as semi-flexible (worm-like and Dirac) chains. The effects of persistence length and Bjerrum's length on the chain stiffness are analyzed numerically. An explicit expression is developed for the radial distribution function of a chain with the maximum stiffness.
△ Less
Submitted 28 July, 2004;
originally announced July 2004.
-
The end-to-end distribution function for a flexible chain with weak excluded-volume interactions
Authors:
A. D. Drozdov
Abstract:
An explicit expression is derived for the distribution function of end-to-end vectors and for the mean square end-to-end distance of a flexible chain with excluded-volume interactions. The Hamiltonian for a flexible chain with weak intra-chain interactions is determined by two small parameters: the ratio $ε$ of the energy of interaction between segments (within a sphere whose radius coincides wi…
▽ More
An explicit expression is derived for the distribution function of end-to-end vectors and for the mean square end-to-end distance of a flexible chain with excluded-volume interactions. The Hamiltonian for a flexible chain with weak intra-chain interactions is determined by two small parameters: the ratio $ε$ of the energy of interaction between segments (within a sphere whose radius coincides with the cut-off length for the potential) to the thermal energy, and the ratio $δ$ of the cut-off length to the radius of gyration for a Gaussian chain. Unlike conventional approaches grounded on the mean-field evaluation of the end-to-end distance, the Green function is found explicitly (in the first approximation with respect to $ε$). It is demonstrated that (i) the distribution function depends on $ε$ in a regular way, while its dependence on $δ$ is singular, and (ii) the leading term in the expression for the mean square end-to-end distance linearly grows with $ε$ and remains independent of $δ$.
△ Less
Submitted 25 June, 2004;
originally announced June 2004.
-
Networks of self-avoiding chains and Ogden-type constitutive equations for elastomers
Authors:
A. D. Drozdov,
M. Gottlieb
Abstract:
An expression is derived for the strain energy of a polymer chain under an arbitrary three-dimensional deformation with finite strains. For a Gaussian chain, this expression is reduced to the conventional Moony--Rivlin constitutive law, while for non-Gaussian chains it implies novel constitutive relations. Based on the three-chain approximation, explicit formulas are developed for the strain ene…
▽ More
An expression is derived for the strain energy of a polymer chain under an arbitrary three-dimensional deformation with finite strains. For a Gaussian chain, this expression is reduced to the conventional Moony--Rivlin constitutive law, while for non-Gaussian chains it implies novel constitutive relations. Based on the three-chain approximation, explicit formulas are developed for the strain energy of a chain modeled as a self-avoiding random walk. In the case of self-avoiding chains with stretched-exponential distribution function of end-to-end vectors, the strain energy density of a network is described by the Ogden law with only two material constants. For the des Cloizeaux distribution function, the constitutive equation involves three adjustable parameters. The governing equations are verified by fitting observations on uniaxial tension, uniaxial compression and biaxial tension of elastomers. Good agreement is demonstrated between the experimental data and the results of numerical analysis. An analytical formula is derived for the ratio of the Young's modulus of a self-avoiding chain to that of a Gaussian chain. It is found that the elastic modulus per chain in the Ogden network exceeds that in a Gaussian network by a factor of three, whereas the elastic modulus of a chain with the generalized stretched exponential distribution function equals about half of the modulus of a Gaussian chain.
△ Less
Submitted 12 May, 2004;
originally announced May 2004.
-
Constitutive equations for a polymer fluid based on the concept of non-affine networks
Authors:
A. D. Drozdov,
R. K. Gupta
Abstract:
Constitutive equations are developed for a polymer fluid, which is treated as a permanent network of strands bridged by junctions. The junctions are assumed to slide with respect to their reference positions under loading. Governing equations are derived by using the laws of thermodynamics under the assumption that the vorticity tensor for the flow of junctions is proportional to that for macro-…
▽ More
Constitutive equations are developed for a polymer fluid, which is treated as a permanent network of strands bridged by junctions. The junctions are assumed to slide with respect to their reference positions under loading. Governing equations are derived by using the laws of thermodynamics under the assumption that the vorticity tensor for the flow of junctions is proportional to that for macro-deformation. Explicit expressions are developed for the steady elongational viscosity, as well as for the steady shear viscosity and normal stress functions. To verify the constitutive relations, three sets of experimental data are approximated on polystyrene solutions with various molecular weights. It is demonstrated that the model can correctly describe stress overshoot for the shear stress and first normal stress difference in start-up tests with various strain rates. Adjustable parameters in the governing equations change consistently with the strain rate, molecular weight and concentration of entanglements. To validate the constitutive equations, observations on low-density polyethylene melt in uniaxial extensional flow are compared with the results of numerical analysis when the material constants are found by matching experimental data in shear tests.
△ Less
Submitted 18 February, 2004;
originally announced February 2004.
-
Linear viscoelasticity of polyolefin melts: the effects of temperature and chain branching
Authors:
A. D. Drozdov,
S. Agarwal,
R. K. Gupta
Abstract:
Observations are reported in isothermal torsional oscillation tests on melts of isotactic polypropylene (iPP) and low-density polyethylene (LDPE) in the intervals of temperature between 190 and 250C (iPP) and between 120 and 190C (LDPE). With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts at three-dimensional de…
▽ More
Observations are reported in isothermal torsional oscillation tests on melts of isotactic polypropylene (iPP) and low-density polyethylene (LDPE) in the intervals of temperature between 190 and 250C (iPP) and between 120 and 190C (LDPE). With reference to the concept of transient networks, constitutive equations are developed for the viscoelastic response of polymer melts at three-dimensional deformations with small strains. A melt is treated as an equivalent network of strands bridged by temporary junctions (entanglements and physical cross-links whose life-times exceed the characteristic time of deformation). The time-dependent behavior of the network is modelled as detachment of active strands from their junctions and merging of dangling strands with the network. The network is assumed to be strongly heterogeneous in the sense that different junctions have different activation energies for separation of strands. The stress-strain relations involve three adjustable parameters (the plateau modulus, the average activation energy for rearrangement of strands and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. The difference in the effects of temperature on the material constants of iPP and LDPE is associated with the difference in their molecular architecture.
△ Less
Submitted 13 November, 2003;
originally announced November 2003.
-
Thermal degradation and viscoelasticity of polypropylene-clay nanocomposites
Authors:
A. D. Drozdov,
A. Al-Mulla,
D. A. Drozdov,
R. K. Gupta
Abstract:
Results of torsional oscillation tests are reported that were performed at the temperature T=230C on melts of a hybrid nanocomposite consisting of isotactic polypropylene reinforced with 5 wt.% of montmorillonite clay. Prior to mechanical testing, specimens were annealed at temperatures ranging from 250 to 310C for various amounts of time (from 15 to 420 min). Thermal treatment induced degradati…
▽ More
Results of torsional oscillation tests are reported that were performed at the temperature T=230C on melts of a hybrid nanocomposite consisting of isotactic polypropylene reinforced with 5 wt.% of montmorillonite clay. Prior to mechanical testing, specimens were annealed at temperatures ranging from 250 to 310C for various amounts of time (from 15 to 420 min). Thermal treatment induced degradation of the matrix and a pronounced decrease in its molecular weight. An integro-differential equation is derived for the evolution of molecular weight based on the fragmentation-aggregation concept. This relation involves two adjustable parameters that are found by fitting observations. With reference to the theory of transient networks, constitutive equations are developed for the viscoelastic response of nanocomposite melts. The stress-strain relations are characterized by three material constants (the shear modulus, the average energy for rearrangement of strands and the standard deviation of activation energies) that are determined by matching the dependencies of storage and loss moduli on frequency of oscillations. Good agreement is demonstrated between the experimental data and the results of numerical simulation. It is revealed that the average energy for separation of strands from temporary junctions is independent of molecular weight, whereas the elastic modulus and the standard deviation of activation energies linearly increase with mass-average molecular weight.
△ Less
Submitted 3 October, 2003;
originally announced October 2003.
-
Kinetic equations for thermal degradation of polymers
Authors:
A. D. Drozdov
Abstract:
Kinetic equations are analyzed for thermal degradation of polymers. The governing relations are based on the fragmentation-annihilation concept. Explicit solutions to these equations are derived in two particular cases of interest. For arbitrary values of adjustable parameters, the evolution of the number-average and mass-average molecular weights of polymers is analyzed numerically. Good agreem…
▽ More
Kinetic equations are analyzed for thermal degradation of polymers. The governing relations are based on the fragmentation-annihilation concept. Explicit solutions to these equations are derived in two particular cases of interest. For arbitrary values of adjustable parameters, the evolution of the number-average and mass-average molecular weights of polymers is analyzed numerically. Good agreement is demonstrated between the results of numerical simulation and experimental data. It is revealed that the model can correctly predict observations in thermo-gravimetric tests when its parameters are determined by matching experimental data for the decrease in molecular weight with exposure time.
△ Less
Submitted 29 September, 2003;
originally announced September 2003.
-
The effect of strain rate on the viscoplastic behavior of isotactic polypropylene at finite strains
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Two series of uniaxial tensile tests are performed on isotactic polypropylene with the strain rates ranging from 5 to 200 mm/min. In the first series, injection-molded specimens are used without thermal pre-treatment, whereas in the other series, the samples are annealed for 51 h at 160C prior to testing.
A constitutive model is developed for the viscoplastic behavior of isotactic polypropylen…
▽ More
Two series of uniaxial tensile tests are performed on isotactic polypropylene with the strain rates ranging from 5 to 200 mm/min. In the first series, injection-molded specimens are used without thermal pre-treatment, whereas in the other series, the samples are annealed for 51 h at 160C prior to testing.
A constitutive model is developed for the viscoplastic behavior of isotactic polypropylene at finite strains. A semicrystalline polymer is treated as an equivalent heterogeneous network of chains bridged by permanent junctions (physical cross-links and entanglements). The network is thought of as an ensemble of meso-regions connected with each other by links (lamellar blocks). In the sub-yield region of deformations, junctions between chains in meso-domains slide with respect to their reference positions (which reflects sliding of nodes in the amorphous phase and fine slip of lamellar blocks). Above the yield point, sliding of nodes is accompanied by displacements of meso-domains in the ensemble with respect to each other (which reflects coarse slip and fragmentation of lamellar blocks).
Stress-strain relations for a semicrystalline polymer are derived by using the laws of thermodynamics. The constitutive equations are determined by 5 adjustable parameters that are found by matching observations. Fair agreement is demonstrated between the experimental data and the results of numerical simulation.
△ Less
Submitted 31 July, 2002;
originally announced July 2002.
-
A model for anomalous moisture diffusion through a polymer-clay nanocomposite
Authors:
A. D. Drozdov,
J. deC. Christiansen,
R. K. Gupta,
A. P. Shah
Abstract:
Experimental data are reported on moisture diffusion and the elastoplastic response of an intercalated nanocomposite with vinyl ester resin matrix and montmorillonite clay filler at room temperature. Observations in diffusion tests show that water transport in the neat resin is Fickian, whereas it becomes anomalous (non-Fickian) with the growth of the clay content. This transition is attributed…
▽ More
Experimental data are reported on moisture diffusion and the elastoplastic response of an intercalated nanocomposite with vinyl ester resin matrix and montmorillonite clay filler at room temperature. Observations in diffusion tests show that water transport in the neat resin is Fickian, whereas it becomes anomalous (non-Fickian) with the growth of the clay content. This transition is attributed to immobilization of penetrant molecules on the surfaces of hydrophilic clay layers. Observations in uniaxial tensile tests demonstrate that the response of vinyl ester resin is strongly elastoplastic, whereas an increase in the clay content results in a severe decrease of plastic strains observed as a noticeable reduction of curvatures of the stress--strain diagrams. This is explained by slowing down of molecular mobility in the host matrix driven by confinement of chains in galleries between platelets. Constitutive equations are developed for the anomalous moisture diffusion through and the elastoplastic behavior of a nanocomposite. Adjustable parameters in these relations are found by fitting the experimental data. Fair agreement is demonstrated between the observations and the results of numerical simulation. A striking similarity is revealed between changes in diffusivity, ultimate water uptake and the rate of plastic flow with an increase in the clay content.
△ Less
Submitted 16 June, 2002; v1 submitted 14 June, 2002;
originally announced June 2002.
-
The elastoplastic response of and moisture diffusion through a vinyl ester resin-clay nanocomposite
Authors:
A. D. Drozdov,
J. deC. Christiansen,
R. K. Gupta,
A. P. Shah
Abstract:
Experimental data are reported on the elastoplastic response of and moisture diffusion through a vinyl ester resin-montmorillonite clay nanocomposite with various amounts of filler. Two simple models are developed for the elastoplastic behavior of a nanocomposite and for the anomalous diffusion of penetrant molecules. Adjustable parameters in the constitutive equations are found by fitting the o…
▽ More
Experimental data are reported on the elastoplastic response of and moisture diffusion through a vinyl ester resin-montmorillonite clay nanocomposite with various amounts of filler. Two simple models are developed for the elastoplastic behavior of a nanocomposite and for the anomalous diffusion of penetrant molecules. Adjustable parameters in the constitutive equations are found by fitting the observations. It is revealed that some critical concentration of filler exists (about 1 wt.-%): in the sub-critical region of concentrations, molecular mobility of the host polymer strongly decreases with the clay content, whereas in the post-critical domain, the filler fraction weakly affects mobility of chains.
△ Less
Submitted 23 May, 2002;
originally announced May 2002.
-
Modelling the linear viscoelastic behavior of silicate glasses near the glass transition point
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
A model is derived for the viscoelastic response of glasses at isothermal uniaxial deformation with small strains. A glass is treated as an ensemble of relaxing units with various activation energies for rearrangement. With reference to the energy-landscape concept, the rearrangement process is thought of as a series of hops of relaxing units (trapped in their potential wells on the energy lands…
▽ More
A model is derived for the viscoelastic response of glasses at isothermal uniaxial deformation with small strains. A glass is treated as an ensemble of relaxing units with various activation energies for rearrangement. With reference to the energy-landscape concept, the rearrangement process is thought of as a series of hops of relaxing units (trapped in their potential wells on the energy landscape) to higher energy levels. Stress-strain relations are developed by using the laws of thermodynamics. Adjustable parameters are found by fitting experimental data in torsional dynamic tests on a multicomponent silicate glass at several temperatures near the glass transition point.
△ Less
Submitted 17 May, 2002;
originally announced May 2002.
-
The effect of annealing on the elastoplastic response of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Four series of tensile loading-unloading tests are performed on isotactic polypropylene in the sub-yield domain of deformations at room temperature. In the first series, injection-molded specimens are used as produced, whereas in the other series the samples are annealed for 24 h at 120, 140 and 160 C, which covers the low-temperature region and an initial part of the high-temperature region of…
▽ More
Four series of tensile loading-unloading tests are performed on isotactic polypropylene in the sub-yield domain of deformations at room temperature. In the first series, injection-molded specimens are used as produced, whereas in the other series the samples are annealed for 24 h at 120, 140 and 160 C, which covers the low-temperature region and an initial part of the high-temperature region of annealing temperatures. A constitutive model is developed for the elastoplastic behavior of a semicrystalline polymer. The stress-strain relations are determined by five adjustable parameters that are found by fitting the experimental data. The effect of annealing is analyzed on the material constants.
△ Less
Submitted 17 May, 2002;
originally announced May 2002.
-
The effect of annealing on the elastoplastic and viscoelastic responses of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Observations are reported on isotactic polypropylene (i) in a series of tensile tests with a constant strain rate on specimens annealed for 24 h at various temperatures in the range from 110 to 150 C and (ii) in two series of creep tests in the sub-yield region of deformation on samples not subjected to thermal treatment and on specimens annealed at 140 C. A model is developed for the elastoplas…
▽ More
Observations are reported on isotactic polypropylene (i) in a series of tensile tests with a constant strain rate on specimens annealed for 24 h at various temperatures in the range from 110 to 150 C and (ii) in two series of creep tests in the sub-yield region of deformation on samples not subjected to thermal treatment and on specimens annealed at 140 C. A model is developed for the elastoplastic and nonlinear viscoelastic responses of semicrystalline polymers. A polymer is treated an equivalent transient network of macromolecules bridged by junctions (physical cross-links, entanglements and lamellar blocks). The network is assumed to be highly heterogeneous, and it is thought of as an ensemble of meso-regions with different activation energies for separation of strands from temporary nodes. The elastoplastic behavior is modelled as sliding of meso-domains with respect to each other driven by mechanical factors. The viscoelastic response is attributed to detachment of active strands from temporary junctions and attachment of dangling chains to the network. Constitutive equations for isothermal uniaxial deformation are derived by using the laws of thermodynamics. Adjustable parameters in the stress-strain relations are found by fitting the experimental data.
△ Less
Submitted 6 March, 2002;
originally announced March 2002.
-
The nonlinear time-dependent response of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Tensile creep tests, tensile relaxation tests and a tensile test with a constant rate of strain are performed on injection-molded isotactic polypropylene at room temperature in the vicinity of the yield point. A constitutive model is derived for the time-dependent behavior of semi-crystalline polymers. A polymer is treated as an equivalent network of chains bridged by permanent junctions. The ne…
▽ More
Tensile creep tests, tensile relaxation tests and a tensile test with a constant rate of strain are performed on injection-molded isotactic polypropylene at room temperature in the vicinity of the yield point. A constitutive model is derived for the time-dependent behavior of semi-crystalline polymers. A polymer is treated as an equivalent network of chains bridged by permanent junctions. The network is modelled as an ensemble of passive meso-regions (with affine nodes) and active meso-domains (where junctions slip with respect to their positions in the bulk medium with various rates). The distribution of activation energies for sliding in active meso-regions is described by a random energy model. Adjustable parameters in the stress--strain relations are found by fitting experimental data. It is demonstrated that the concentration of active meso-domains monotonically grows with strain, whereas the average potential energy for sliding of junctions and the standard deviation of activation energies suffer substantial drops at the yield point. With reference to the concept of dual population of crystalline lamellae, these changes in material parameters are attributed to transition from breakage of subsidiary (thin) lamellae in the sub-yield region to fragmentation of primary (thick) lamellae in the post-yield region of deformation.
△ Less
Submitted 28 February, 2002;
originally announced February 2002.
-
The effect of annealing on the nonlinear viscoelastic response of isotactic polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
Three series of tensile relaxation tests are performed on isotactic polypropylene at room temperature in the vicinity of the yield point. In the first series of experiments, injection-molded samples are used without thermal pre-treatment. In the second and third series, prior to testing the specimens are annealed at 130 C for 4 and 24 hours, respectively. Constitutive equations are derived for t…
▽ More
Three series of tensile relaxation tests are performed on isotactic polypropylene at room temperature in the vicinity of the yield point. In the first series of experiments, injection-molded samples are used without thermal pre-treatment. In the second and third series, prior to testing the specimens are annealed at 130 C for 4 and 24 hours, respectively. Constitutive equations are derived for the time-dependent response of semicrystalline polymers at isothermal loading. A polymer is treated as an equivalent temporary network of macromolecules bridged by junctions (physical cross-links, entanglements and crystalline lamellae). Under loading, junctions slip with respect to their positions in the bulk material (which reflects the viscoplastic behavior), whereas chains separate from their junctions and merge with new ones at random times (which reflects the viscoelastic response). The network is thought of as an ensemble of meso-regions (MR) with various activation energies for detachment of chains from temporary nodes. Adjustable parameters in the stress-strain relations are found by fitting observations. Experimental data demonstrate that the shape of the relaxation spectrum (characterized by the distribution of MRs with various potential energies) is independent of mechanical factors, but is altered at annealing. For specimens not subjected to thermal treatment, the growth of longitudinal strain does not affect the volume fraction of active MRs and the attempt rate for detachment of chains from their junctons. For annealed samples, the concentration of active MRs increases and the attempt rate decreases with strain. These changes in the time-dependent response are attributed to broadening of the distribution of strengths of crystalline lamellae at annealing.
△ Less
Submitted 25 January, 2002;
originally announced January 2002.
-
The nonlinear viscoelastic behavior of polypropylene
Authors:
A. D. Drozdov,
J. deC. Christiansen
Abstract:
A series of tensile relaxation tests is performed on isotactic polypropylene in the sub-yield and post-yield regions at room temperature. Constitutive equations are derived for the time-dependent response of a semicrystalline polymer at isothermal loading with small strains. Adjustable parameters in the stress-strain relations are found by fitting experimental data. It is demonstrated that the g…
▽ More
A series of tensile relaxation tests is performed on isotactic polypropylene in the sub-yield and post-yield regions at room temperature. Constitutive equations are derived for the time-dependent response of a semicrystalline polymer at isothermal loading with small strains. Adjustable parameters in the stress-strain relations are found by fitting experimental data. It is demonstrated that the growth of the longitudinal strain results in an increase in the relaxation rate in a small interval of strains in the sub-yield domain. When the strain exceeds some critical value which is substantially less than the apparent yield strain, the relaxation process becomes strain-independent.
△ Less
Submitted 11 January, 2002;
originally announced January 2002.
-
A concept of polymeric networks with sliding junctions for the time-dependent response of filled elastomers
Authors:
Aleksey D. Drozdov,
Al Dorfmann
Abstract:
Constitutive equations are derived for the time-dependent behavior of particle-reinforced elastomers at isothermal loading with finite strains. A rubbery polymer is modelled as a network of macromolecules bridged by junctions which can slip with respect to the bulk material under straining. A filled elastomer is thought of as an ensemble of meso-regions where sliding occurs with different rates.…
▽ More
Constitutive equations are derived for the time-dependent behavior of particle-reinforced elastomers at isothermal loading with finite strains. A rubbery polymer is modelled as a network of macromolecules bridged by junctions which can slip with respect to the bulk material under straining. A filled elastomer is thought of as an ensemble of meso-regions where sliding occurs with different rates. Stress-strain relations for a particle-reinforced rubber are developed by using the laws of thermodynamics. For tensile relaxation tests, these equations are characterized by three adjustable parameters. To determine the experimental constants, three series of relaxation tests are performed for longitudinal strains in the range from 100 to 250 %. By fitting observations, the influence of pre-loading and thermal recovery is analyzed on the nonlinear viscoelastic response of natural rubber reinforced with carbon black.
△ Less
Submitted 18 November, 2001; v1 submitted 15 November, 2001;
originally announced November 2001.
-
Finite viscoelasticity of filled rubbers: the effects of pre-loading and thermal recovery
Authors:
Aleksey D. Drozdov,
Al Dorfmann
Abstract:
Constitutive equations are derived for the viscoelastic behavior of filled elastomers at isothermal loading with finite strains. A particle-reinforced rubber is thought of as a composite where regions with low concentrations of junctions between chains are randomly distributed in the bulk material. The onset of these inclusions is associated with the inhomogeneity in spatial distribution of a cr…
▽ More
Constitutive equations are derived for the viscoelastic behavior of filled elastomers at isothermal loading with finite strains. A particle-reinforced rubber is thought of as a composite where regions with low concentrations of junctions between chains are randomly distributed in the bulk material. The onset of these inclusions is associated with the inhomogeneity in spatial distribution of a cross-linker during the mixing process. With reference to the theory of transient networks, the time-dependent response of an elastomer is modelled as thermally activated processes of breakage and reformation of chains in domains with low concentrations of junctions, whereas junctions in the bulk medium are treated as permanent. Stress-strain relations are developed by using the laws of thermodynamics. Adjustable parameters in the constitutive equations are found by fitting experimental data in tensile relaxation tests for several grades of unfilled and carbon black filled natural rubber. It is demonstrated that (i) the average relaxation time noticeably grows with the elongation ratio, which is explained by mechanically-induced crystallization of strands, and (ii) the relaxation spectrum of a filled elastomer is not affected by mechanical pre-loading and thermal recovery at elevated temperatures.
△ Less
Submitted 12 October, 2001;
originally announced October 2001.
-
Finite viscoelasticity of filled rubbers: experiments and numerical simulation
Authors:
Aleksey D. Drozdov,
Al Dorfmann
Abstract:
Constitutive equations are derived for the viscoelastic behavior of particle-reinforced rubbers at isothermal loading with finite strains. A filled rubber is thought of as a composite medium where inclusions with high and low concentrations of junctions between chains are randomly distributed in a host matrix. The inclusions with high concentration of junctions are associated with regions of sup…
▽ More
Constitutive equations are derived for the viscoelastic behavior of particle-reinforced rubbers at isothermal loading with finite strains. A filled rubber is thought of as a composite medium where inclusions with high and low concentrations of junctions between chains are randomly distributed in a host matrix. The inclusions with high concentration of junctions are associated with regions of suppressed mobility of chains that surround isolated clusters of filler and its secondary network. The regions with low concentration of junctions arise during the mixing process due to the inhomogeneity in spatial distribution of a cross-linker. The viscoelastic response of elastomers is ascribed to the thermally activated processes of breakage and reformation of strands in the domains with low concentration of junctions. Stress-strain relations for particle-reinforced rubbers are developed by using the laws of thermodynamics. Adjustable parameters in the constitutive equations are found by fitting experimental data in tensile relaxation tests for several grades of unfilled and carbon black (CB) filled rubber. It is demonstrated that the relaxation rate is noticeably affected by strains. Unlike glassy polymers, where the growth of longitudinal strain results in an increase in the rate of relaxation, the growth of the elongation ratio for natural rubber (unfilled or CB reinforced) implies a decrease in the relaxation rate, which may be explained by partial crystallization of chains in the regions with low concentration of junctions.
△ Less
Submitted 5 October, 2001;
originally announced October 2001.
-
A tube concept in rubber viscoelasticity
Authors:
Aleksey D. Drozdov
Abstract:
A constitutive model is derived for the time-dependent response of particle-reinforced elastomers at finite strains. An amorphous rubbery polymer is treated as a network of long chains linked by permanent junctions (chemical crosslinks, entanglements and filler particles). A strand between two neighboring junctions is thought of as a sequence of mers whose motion is restricted to some tube by su…
▽ More
A constitutive model is derived for the time-dependent response of particle-reinforced elastomers at finite strains. An amorphous rubbery polymer is treated as a network of long chains linked by permanent junctions (chemical crosslinks, entanglements and filler particles). A strand between two neighboring junctions is thought of as a sequence of mers whose motion is restricted to some tube by surrounding macromolecules. Unlike the conventional approach that presumes the cross-section of the tube to be constant, we postulate that its radius strongly depends on the longitudinal coordinate. This implies that a strand may be modeled as a sequence of segments whose thermal motion is totally frozen by the environment (bottle-neck points of the tube) bridged by threads of mers which go through all possible configurations during the characteristic time of a test. Thermal fluctuations affect the tube's radius, which results in freezing and activation of regions with high molecular mobility (RHMs). The viscoelastic response of an elastomer is associated with thermally activated changes in the number of RHMs in strands. Stress-strain relations for a rubbery polymer at finite strains and kinetic equations for the concentrations of RHMs are developed by using the laws of thermodynamics. At small strains these relations are reduced to the conventional integral constitutive equation in linear viscoelasticity with a novel scaling law for relaxation times. The governing equation is determined by 5 adjustable parameters which are found by fitting experimental data in tensile dynamic tests on a carbon black filled natural rubber vulcanizate.
△ Less
Submitted 28 May, 2001;
originally announced May 2001.
-
The viscoelastic and anelastic responses of amorphous polymers in the vicinity of the glass transition temperature
Authors:
Aleksey D. Drozdov,
Joachim Kaschta
Abstract:
The time-dependent response of polystyrene and poly(methyl methacrylate) is studied in isothermal long-term shear creep tests at small strains and various temperatures in the vicinity of the glass transition point. A micromechanical model is derived to describe the experimental results. Constitutive equations are developed under the assumption that the behavior of amorphous polymers is governed…
▽ More
The time-dependent response of polystyrene and poly(methyl methacrylate) is studied in isothermal long-term shear creep tests at small strains and various temperatures in the vicinity of the glass transition point. A micromechanical model is derived to describe the experimental results. Constitutive equations are developed under the assumption that the behavior of amorphous polymers is governed by two micro-mechanisms: rearrangement of cooperatively relaxing regions (CRR) reflects the viscoelastic response, whereas displacement of CRRs with respect to each other is responsible for the anelastic response. It is demonstrated that some critical temperature exists slightly above the glass transition temperature, where the dependences of adjustable parameters on temperature are dramatically changed. The critical temperature is associated with transition from dynamic heterogeneity in amorphous polymers to static inhomogeneity.
△ Less
Submitted 13 May, 2001;
originally announced May 2001.
-
Stress-softening and recovery of elastomers
Authors:
Aleksey D. Drozdov,
Al Dorfmann
Abstract:
A constitutive model is developed for the mechanical response of elastomers at finite strains. A polymer is treated as a network of linear chains linked by permanent (chemical crosslinks) and temporary (entanglements and van der Waals forces) junctions. Temporary junctions are assumed to be in two states: loose (passive) when they impose only topological constrains on available configurations of…
▽ More
A constitutive model is developed for the mechanical response of elastomers at finite strains. A polymer is treated as a network of linear chains linked by permanent (chemical crosslinks) and temporary (entanglements and van der Waals forces) junctions. Temporary junctions are assumed to be in two states: loose (passive) when they impose only topological constrains on available configurations of chains, and tight (active) when their effect is tantamount to that for crosslinks. Stretching of a specimen implies that some loose junctions become active, which decreases the average length of a chain.
A long chain is treated as an ensemble of inextensible strands connected in sequel. Two neighboring strands are bridged by a bond which may be in two conformations: flexed (trans) and extended (cis). A bond in the flexed conformation is modeled as a linear elastic solid, whereas the mechanical energy of a bond in the extended conformation (two rigid rods directed along a straight line) is disregarded. For a virgin specimen, all bonds are in the flexed conformation. Under loading some bonds are transformed from flexed to extended conformation.
Stress-strain relations for a rubbery polymer and kinetic equations for the trans-cis transition are derived using the laws of thermodynamics. Governing equations are determined by 5 adjustable parameters which are found by fitting experimental data in uniaxial tensile tests on natural rubber vulcanizates with various amounts of crosslinks. Fair agreement is demonstrated between results of numerical simulation and observations with the elongation ratio up to $k=8$. We analyze the effects of cyclic loading, thermal annealing and recovery by swelling on the material constants.
△ Less
Submitted 3 February, 2001;
originally announced February 2001.
-
The Payne effect for particle-reinforced elastomers
Authors:
Aleksey D. Drozdov,
Al Dorfmann
Abstract:
The study deals with the Payne effect (a substantial decrease in the storage modulus of a particle-reinforced elastomer with an increase in the amplitude of mechanical oscillations). The influence of temperature, concentration of filler and amplitude and frequency of strains is analyzed on the mechanical response of filled rubbery polymers. Constitutive equations are derived using the concept of…
▽ More
The study deals with the Payne effect (a substantial decrease in the storage modulus of a particle-reinforced elastomer with an increase in the amplitude of mechanical oscillations). The influence of temperature, concentration of filler and amplitude and frequency of strains is analyzed on the mechanical response of filled rubbery polymers. Constitutive equations are derived using the concept of two interpenetrating networks: one comprises semiflexible polymeric chains connected to temporary junctions, whereas the other is formed by aggregated filler clusters. Adjustable parameters are found by fitting experimental data for natural rubber, bromobutyl rubber and styrene-butadiene rubber reinforced by carbon black and polymeric particles. The critical concentration of particles is determined that characterizes transition from an ensemble of disjoint clusters to the network of filler. The volume fraction of filler corresponding to this transition is found to be close to theoretical predictions based on the percolation theory, as well as to experimental data for isolator-conductor transition.
△ Less
Submitted 13 November, 2000;
originally announced November 2000.
-
The effect of temperature on the viscoelastic response of rubbery polymers at finite strains
Authors:
Aleksey D. Drozdov,
Al Dorfmann
Abstract:
Constitutive equations are derived for the viscoelastic response of rubbery polymers at finite strains. A polymer is thought of as a network of long chains connected to temporary junctions. At a random time, a chain detaches from a junction, which is treated at transition from its active state to the dangling state. A dangling chain randomly captures a new junction in the vicinity of its free en…
▽ More
Constitutive equations are derived for the viscoelastic response of rubbery polymers at finite strains. A polymer is thought of as a network of long chains connected to temporary junctions. At a random time, a chain detaches from a junction, which is treated at transition from its active state to the dangling state. A dangling chain randomly captures a new junction in the vicinity of its free end and returns to its active state. Breakage and reformation of long chains are modeled as thermo-mechanically activated processes. Stress-strain relations for a rubbery polymer are developed using the laws of thermodynamics. Adjustable parameters in the model are found by fitting observations in uniaxial tensile tests for a carbon black filled rubber at various temperatures. Fair agreement is demonstrated between experimental data and results of numerical simulation.
△ Less
Submitted 26 October, 2000;
originally announced October 2000.
-
Modeling the viscoelastoplastic response of amorphous glassy polymers
Authors:
Aleksey D. Drozdov
Abstract:
Constitutive equations are derived for the viscoelastoplastic response of amorphous glassy polymers at isothermal loading with small strains. A polymer is treated as an ensemble of cooperatively relaxing regions (CRR) which rearrange at random times as they are thermally agitated. Rearrangement of CRRs reflects the viscoelastic response of the bulk medium. At low stresses, CRRs are connected wit…
▽ More
Constitutive equations are derived for the viscoelastoplastic response of amorphous glassy polymers at isothermal loading with small strains. A polymer is treated as an ensemble of cooperatively relaxing regions (CRR) which rearrange at random times as they are thermally agitated. Rearrangement of CRRs reflects the viscoelastic response of the bulk medium. At low stresses, CRRs are connected with each other, which implies that the macro-strain in a specimen coincides with micro-strains in individual relaxing regions. When the average stress exceeds some threshold level, links between CRRs break and relaxing domains begin to slide one with respect to another. Sliding of micro-domains is associated with the viscoplastic behavior of polymers. Kinetic equations are proposed for viscoplastic strains and for the evolution of the threshold stress. These equations are validated by comparison with experimental data in tensile relaxation tests and in tests with constant strain rates. Fair agreement is demonstrated between results of numerical simulation and observations for a polyurethane resin and poly(methyl methacrylate).
△ Less
Submitted 25 August, 2000;
originally announced August 2000.
-
Modelling structural relaxation in polymeric glasses using the aggregation-fragmentation concept
Authors:
Aleksey D. Drozdov
Abstract:
Governing equations are derived for the kinetics of physical aging in polymeric glasses. An amorphous polymer is treated as an ensemble of cooperatively rearranged regions (CRR). Any CRR is thought of as a string of elementary clusters (EC). Fragmentation of the string may occur at random time at any border between ECs. Two string can aggregate at random time to produce a new string. The process…
▽ More
Governing equations are derived for the kinetics of physical aging in polymeric glasses. An amorphous polymer is treated as an ensemble of cooperatively rearranged regions (CRR). Any CRR is thought of as a string of elementary clusters (EC). Fragmentation of the string may occur at random time at any border between ECs. Two string can aggregate at random time to produce a new string. The processes of aggregation and fragmentation are treated as thermally activated, and the rate of fragmentation is assumed to grow with temperature more rapidly than that for coalescence. This implies that only elementary clusters are stable at the glass transition temperature, whereas below this temperature, CRRs containing several ECs remain stable as well. A nonlinear differential equation is developed for the distribution of CRRs with various numbers of ECs. Adjustable parameters of the model are found by fitting experimental data in calorimetric tests for polycarbonate, poly(methyl methacrylate), polystyrene and poly(vinyl acetate). For all materials, fair agreement is established between observations and results of numerical simulation. For PVAc, the relaxation spectrum found by matching data in a calorimetric test is successfully employed to predict experimental data in a shear relaxation test.
△ Less
Submitted 12 May, 2000;
originally announced May 2000.
-
Buckling of rods with spontaneous twist and curvature
Authors:
Aleksey D. Drozdov,
Yitzhak Rabin
Abstract:
We analyze stability of a thin inextensible elastic rod which has non-vanishing spontaneous generalized torsions in its stress-free state. Two classical problems are studied, both involving spontaneously twisted rods: a rectilinear beam compressed by axial forces, and a circular ring subjected to uniform radial pressure on its outer perimeter. It is demonstrated that while spontaneous twist stab…
▽ More
We analyze stability of a thin inextensible elastic rod which has non-vanishing spontaneous generalized torsions in its stress-free state. Two classical problems are studied, both involving spontaneously twisted rods: a rectilinear beam compressed by axial forces, and a circular ring subjected to uniform radial pressure on its outer perimeter. It is demonstrated that while spontaneous twist stabilizes a rectilinear rod against buckling, its presence has an opposite effect on a closed ring.
△ Less
Submitted 8 April, 2000;
originally announced April 2000.
-
Enthalpy recovery in semicrystalline polymers
Authors:
Aleksey D. Drozdov
Abstract:
Constitutive equations are derived for enthalpy recovery in polymeric glasses after thermal jumps. The model is based on the theory of cooperative relaxation in a version of the trap** concept. It is demonstrated that some critical temperature and some critical degree of crystallinity exist above which the energy landscape becomes homogeneous and structural relaxation ceases.
Constitutive equations are derived for enthalpy recovery in polymeric glasses after thermal jumps. The model is based on the theory of cooperative relaxation in a version of the trap** concept. It is demonstrated that some critical temperature and some critical degree of crystallinity exist above which the energy landscape becomes homogeneous and structural relaxation ceases.
△ Less
Submitted 4 April, 2000;
originally announced April 2000.