-
Flow and clogging behavior of a mixture of particles in a silo
Authors:
Sukhada C. Bhure,
Pankaj Doshi,
Ashish V. Orpe
Abstract:
We investigated the clogging behavior observed during the flow of aspherical particles from a silo in the presence of spherical particles of different sizes and proportions using flow visualization experiments and discrete element method (DEM) simulations. The size of the avalanche, essentially the tendency of clogging, exhibits non-monotonic dependence on the spherical particle volume fraction. F…
▽ More
We investigated the clogging behavior observed during the flow of aspherical particles from a silo in the presence of spherical particles of different sizes and proportions using flow visualization experiments and discrete element method (DEM) simulations. The size of the avalanche, essentially the tendency of clogging, exhibits non-monotonic dependence on the spherical particle volume fraction. For small enough content of spherical particles, the clogging tendency intensifies, whereas it reduces rapidly for high enough spherical particle fractions, with a minimum in between. The non-monotonic behavior is observed to persist over for different spherical particle sizes. The overall behavior is shown to arise due to competing effects between the localized total particle fraction influencing avalanche strength and mean size of the particles exiting the silo, influencing the probability of arch formation.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Flow of lubricated granular material on an inclined plane
Authors:
Ravindra S. Ghodake,
Pankaj Doshi,
Ashish V. Orpe
Abstract:
We have studied the gravity driven flow of spherical shaped, millimetric sized granular material coated with aspherical, micron-sized, near frictionless lubricant particles. Experiments were performed on an inclined plane using two different sized particles for varying concentrations of the lubricant. The particle volumetric flow rate exhibits a non-monotonic behavior with increasing lubricant con…
▽ More
We have studied the gravity driven flow of spherical shaped, millimetric sized granular material coated with aspherical, micron-sized, near frictionless lubricant particles. Experiments were performed on an inclined plane using two different sized particles for varying concentrations of the lubricant. The particle volumetric flow rate exhibits a non-monotonic behavior with increasing lubricant concentration. It shows an increase at lower lubricant concentration followed by a decrease at higher lubricant concentration. The lubricant particles adhere to the granular particle surface thereby reducing the inter-particle friction. However, presence of lubricant particles at higher concentration damps out inter-particle collision thereby reducing the interparticle momentum transfer. Non-monotonicity in the observed behavior is then conjectured to arise due to competing effects of inter-particle friction and inter-particle collision. The present work and the overall observed behavior therein provides a simple experimental system to characterize the effects of added lubricant material in pharmaceutical and other relevant industrial applications.
△ Less
Submitted 21 October, 2022;
originally announced October 2022.
-
Friction-mediated flow and jamming in a two-dimensional silo with two exit orifices
Authors:
Ashish V. Orpe,
Pankaj Doshi
Abstract:
We show that the interparticle friction coefficient significantly influences the flow and jamming behavior of granular materials exiting through the orifice of a two-dimensional silo in the presence of another orifice located in its vicinity. The fluctuations emanating from a continuous flow through a larger orifice results in an intermittent flow through the smaller orifice consisting of sequenti…
▽ More
We show that the interparticle friction coefficient significantly influences the flow and jamming behavior of granular materials exiting through the orifice of a two-dimensional silo in the presence of another orifice located in its vicinity. The fluctuations emanating from a continuous flow through a larger orifice results in an intermittent flow through the smaller orifice consisting of sequential jamming and flowing events. The mean time duration of jammed and flow events, respectively, increase and decrease monotonically with increasing interparticle friction coefficient. The frequency of unjamming instances ($n_{u}$), however, shows a nonmonotonic behavior comprising an increase followed by a decrease with increasing friction coefficient. The decrease on either side of the maximum, then, represents a system moving progressively towards a permanently jammed or a permanently flowing state. The overall behavior shows a systematic dependence on the interorifice distance which determines the strength of the fluctuations reaching the smaller orifice leading to unjamming instances. The probability distributions of jamming and flowing times are nearly similar for different combinations of friction coefficients and interorifice distances studied and, respectively, exhibit exponential and power-law tails.
△ Less
Submitted 5 July, 2019;
originally announced July 2019.
-
Fingering instability of a suspension film spreading on a spinning disk
Authors:
Mayuresh Kulkarni,
Subhadarshinee Sahoo,
Pankaj Doshi,
Ashish V. Orpe
Abstract:
The spreading of a thin film of suspension on a spinning disk and the accompanying contact line instability is studied through flow visualization experiments. The critical radius for the onset of instability shows an increase with increase in the particle fraction ($φ_{p}$) before decreasing slightly at the highest value of $φ_{p}$ studied, while the instability wavelength ($λ$) exhibits a non-mon…
▽ More
The spreading of a thin film of suspension on a spinning disk and the accompanying contact line instability is studied through flow visualization experiments. The critical radius for the onset of instability shows an increase with increase in the particle fraction ($φ_{p}$) before decreasing slightly at the highest value of $φ_{p}$ studied, while the instability wavelength ($λ$) exhibits a non-monotonic dependence. The value of $λ$ is close to that for a partially wetting liquid at lower $φ_{p}$, it decreases with increasing $φ_{p}$ to a minimum before increasing again at largest $φ_{p}$. The non-monotonic trends observed for $λ$ are discussed in light of the linear stability analysis of thin film equations derived for suspensions by Cook {\it et al.} [Linear stability of particle-laden thin films, Eur. Phys. J.: Spec. Top. {\bf 166}, 77 (2009)] and Balmforth {\it et al.} [Surface tension driven fingering of a viscoplastic film, J. Non Newtonian Fluid Mech. {\bf 142}, 143 (2007)].
△ Less
Submitted 9 June, 2016;
originally announced June 2016.
-
Flow of granular matter in a silo with multiple exit orifices: Jamming to mixing
Authors:
Sandesh Deshmukh,
Amit Kunte,
Pankaj Doshi,
Ashish V. Orpe
Abstract:
We investigate the mixing characteristics of dry granular material while draining down a silo with multiple exit orifices. The mixing in the silo, which otherwise consists of noninteracting stagnant and flow regions, is observed to improve significantly when the flow through specific orifices is stopped intermittently. This momentary stoppage of flow through the orifice is either controlled manual…
▽ More
We investigate the mixing characteristics of dry granular material while draining down a silo with multiple exit orifices. The mixing in the silo, which otherwise consists of noninteracting stagnant and flow regions, is observed to improve significantly when the flow through specific orifices is stopped intermittently. This momentary stoppage of flow through the orifice is either controlled manually or is chosen by the system itself when the orifice width is small enough to cause spontaneous jamming and unjamming. We observe that the overall mixing behavior shows a systematic dependence on the frequency of closing and opening of specific orifices. In particular, the silo configuration employing random jamming and unjamming of any of the orifices shows early evidence of chaotic mixing. When operated in a multipass mode, the system exhibits a practical and efficient way of mixing particles.
△ Less
Submitted 17 December, 2014;
originally announced December 2014.
-
Spontaneous jamming and unjamming in a hopper with multiple exit orifices
Authors:
Amit Kunte,
Pankaj Doshi,
Ashish V. Orpe
Abstract:
We show that the flow of granular material inside a 2-dimensional flat bottomed hopper is altered significantly by having more than one exit orifice. For the hoppers with small orifice widths, inter-mittent flow through one orifice enables the resumption of flow through the adjacent jammed orifice, thus displaying a sequence of jamming and unjamming events. Using discrete element simulations, we s…
▽ More
We show that the flow of granular material inside a 2-dimensional flat bottomed hopper is altered significantly by having more than one exit orifice. For the hoppers with small orifice widths, inter-mittent flow through one orifice enables the resumption of flow through the adjacent jammed orifice, thus displaying a sequence of jamming and unjamming events. Using discrete element simulations, we show that the total amount of granular material (i.e. avalanche size) emanating from all the orifices combined can be enhanced by about an order of magnitude difference by simply adjusting the inter-orifice distance. The unjamming is driven primarily by fluctuations alone when the inter-orifice distance is large, but when the orifices are brought close enough, the fluctuations along with the mean flow cause the flow unjamming.
△ Less
Submitted 2 August, 2014;
originally announced August 2014.
