Showing 1–24 of 24 results for author: Donnelly, C

Vortex motion in reconfigurable three-dimensional superconducting nanoarchitectures

Authors: Elina Zhakina, Luke Turnbull, Weijie Xu, Markus König, Paul Simon, Wilder Carrillo-Cabrera, Amalio Fernandez-Pacheco, Uri Vool, Dieter Suess, Claas Abert, Vladimir M. Fomin, Claire Donnelly

Abstract: When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in techn… ▽ More When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in technologies. Here, we harness three-dimensional (3D) nanopatterning to fabricate and control the emergent properties of a 3D superconducting nanostructure. Not only are we able to demonstrate the existence and motion of superconducting vortices in 3D but, with simulations, we show that the confinement leads to a well-defined bending of the vortices within the volume of the structure. Moreover, we experimentally observe a strong geometrical anisotropy of the critical field, through which we achieve the reconfigurable coexistence of superconducting and normal states in our 3D superconducting architecture, and the local definition of weak links. In this way, we uncover an intermediate regime of nanosuperconductivity, where the vortex state is truly three-dimensional and can be designed and manipulated by geometrical confinement. This insight into the influence of 3D geometries on superconducting properties offers a route to local reconfigurable control for future computing devices, sensors, and quantum technologies. △ Less

Submitted 18 April, 2024; originally announced April 2024.

Comments: 22 pages, 12 figures

Tailoring the energy landscape of a Bloch point singularity with curvature

Authors: Sandra Ruiz-Gomez, Claas Abert, Pamela Morales-Fernández, Claudia Fernandez-Gonzalez, Sabri Koraltan, Lukas Danesi, Dieter Suess, Michael Foerster, Miguel Ángel Nino, Anna Mandziak, Dorota Wilgocka-Ślęzak, Pawel Nita, Markus Koenig, Sebastian Seifert, Aurelio Hierro Rodríguez, Amalio Fernández-Pacheco, Claire Donnelly

Abstract: Topological defects, or singularities, play a key role in the statics and dynamics of complex systems. In magnetism, Bloch point singularities represent point defects that mediate the nucleation of textures such as skyrmions and hopfions. However, while the textures are typically stabilised in chiral magnets, the influence of chirality on the Bloch point singularities remains relatively unexplored… ▽ More Topological defects, or singularities, play a key role in the statics and dynamics of complex systems. In magnetism, Bloch point singularities represent point defects that mediate the nucleation of textures such as skyrmions and hopfions. However, while the textures are typically stabilised in chiral magnets, the influence of chirality on the Bloch point singularities remains relatively unexplored. Here we harness advanced three-dimensional nanofabrication to explore the influence of chirality on Bloch point singularities by introducing curvature-induced symmetry breaking in a ferromagnetic nanowire. Combining X-ray magnetic microscopy with the application of in situ magnetic fields, we demonstrate that Bloch point singularity-containing domain walls are stabilised in straight regions of the sample, and determine that curvature can be used to tune the energy landscape of the Bloch points. Not only are we able to pattern pinning points but, by controlling the gradient of curvature, we define asymmetric potential wells to realise a robust Bloch point shift-register with non-reciprocal behaviour. These insights into the influence of symmetry and chirality on singularities offers a route to the controlled nucleation and propagation of topological textures, providing opportunities for logic and computing devices. △ Less

Submitted 9 April, 2024; originally announced April 2024.

X-ray Linear Dichroic Tomography of Crystallographic and Topological Defects

Authors: Andreas Apseros, Valerio Scagnoli, Mirko Holler, Manuel Guizar-Sicairos, Zirui Gao, Christian Appel, Laura J. Heyderman, Claire Donnelly, Johannes Ihli

Abstract: The functionality of materials is determined by their composition and microstructure, that is, the distribution and orientation of crystalline grains, grain boundaries and the defects within them. The characterisation of the material's microstructure is therefore critical for materials applications such as catalysis, energy storage and buildings. Until now, characterization techniques that map the… ▽ More The functionality of materials is determined by their composition and microstructure, that is, the distribution and orientation of crystalline grains, grain boundaries and the defects within them. The characterisation of the material's microstructure is therefore critical for materials applications such as catalysis, energy storage and buildings. Until now, characterization techniques that map the distribution of grains, their orientation, and the presence of defects have either been limited to surface investigations, to spatial resolutions of a few hundred nanometres, or to systems of thickness around one hundred nanometres, thus requiring destructive sample preparation for measurements and preventing the study of system-representative volumes or the investigation of materials under operational conditions. Here, we present X-ray linear dichroic orientation tomography, a quantitative, non-invasive technique that allows for an intra- and inter-granular characterisation of extended polycrystalline and amorphous materials in three dimensions (3D). We present the detailed characterisation of a polycrystalline sample of vanadium pentoxide (V2O5), a key catalyst in the production of sulfuric acid. In addition to determining the nanoscale composition, we map the crystal orientation throughout the polycrystalline sample with 73 nm spatial resolution. We identify grains, as well as twist, tilt, and twin grain boundaries. We further observe the creation and annihilation of topological defects promoted by the presence of volume crystallographic defects in 3D. Our method's non-destructive and spectroscopic nature opens the door to in-operando combined chemical and microstructural investigations of functional materials, including energy and mechanical materials in existing industries, as well as quantum materials for future technologies. △ Less

Submitted 16 February, 2024; originally announced February 2024.

2024 Roadmap on Magnetic Microscopy Techniques and Their Applications in Materials Science

Authors: D. V. Christensen, U. Staub, T. R. Devidas, B. Kalisky, K. C. Nowack, J. L. Webb, U. L. Andersen, A. Huck, D. A. Broadway, K. Wagner, P. Maletinsky, T. van der Sar, C. R. Du, A. Yacoby, D. Collomb, S. Bending, A. Oral, H. J. Hug, A. -O. Mandru, V. Neu, H. W. Schumacher, S. Sievers, H. Saito, A. A. Khajetoorians, N. Hauptmann , et al. (28 additional authors not shown)

Abstract: Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of… ▽ More Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of major importance to understand the material responses and qualify them for specific applications. In this roadmap, we aim to cover a broad portfolio of techniques to perform nano- and microscale magnetic imaging using SQUIDs, spin center and Hall effect magnetometries, scanning probe microscopies, x-ray- and electron-based methods as well as magnetooptics and nanoMRI. The roadmap is aimed as a single access point of information for experts in the field as well as the young generation of students outlining prospects of the development of magnetic imaging technologies for the upcoming decade with a focus on physics, materials science, and chemistry of planar, 3D and geometrically curved objects of different material classes including 2D materials, complex oxides, semi-metals, multiferroics, skyrmions, antiferromagnets, frustrated magnets, magnetic molecules/nanoparticles, ionic conductors, superconductors, spintronic and spinorbitronic materials. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Soft X-ray phase nano-microscopy of micrometre-thick magnets

Authors: Jeffrey Neethi Neethirajan, Benedikt Daurer, Marisel Di Pietro Martínez, Aleš Hrabec, Luke Turnbull, Majid Kazemian, Burkhard Kaulich, Claire Donnelly

Abstract: Imaging of nanoscale magnetic textures within extended material systems is of critical importance both to fundamental research and technological applications. Whilst high resolution magnetic imaging of thin nanoscale samples is well-established with electron and soft X-ray microscopy, the extension to micrometer-thick systems with hard X-rays currently limits high resolution imaging to rare-earth… ▽ More Imaging of nanoscale magnetic textures within extended material systems is of critical importance both to fundamental research and technological applications. Whilst high resolution magnetic imaging of thin nanoscale samples is well-established with electron and soft X-ray microscopy, the extension to micrometer-thick systems with hard X-rays currently limits high resolution imaging to rare-earth magnets. Here we overcome this limitation by establishing soft X-ray magnetic imaging of micrometer-thick systems using the pre-edge phase X-ray Magnetic Circular Dichroism signal, thus making possible the study of a wide range of magnetic materials. By performing dichroic spectro-ptychography, we demonstrate high spatial resolution imaging of magnetic samples up to 1.7 μm thick, an order of magnitude higher than conventionally possible with absorption-based techniques. This new regime of magnetic imaging makes possible the study of extended non rare-earth systems that have until now been inaccessible, from magnetic textures for future spintronic applications to non-rare-earth permanent magnets. △ Less

Submitted 26 September, 2023; originally announced September 2023.

Three-dimensional spin-wave dynamics, localization and interference in a synthetic antiferromagnet

Authors: Davide Girardi, Simone Finizio, Claire Donnelly, Guglielmo Rubini, Sina Mayr, Valerio Levati, Simone Cuccurullo, Federico Maspero, Jörg Raabe, Daniela Petti, Edoardo Albisetti

Abstract: Spin waves are collective perturbations in the orientation of the magnetic moments in magnetically ordered materials. Their rich phenomenology is intrinsically three-dimensional; however, the three-dimensional imaging of spin waves has so far not been possible. Here, we image the three-dimensional dynamics of spin waves excited in a synthetic antiferromagnet, with nanoscale spatial resolution and… ▽ More Spin waves are collective perturbations in the orientation of the magnetic moments in magnetically ordered materials. Their rich phenomenology is intrinsically three-dimensional; however, the three-dimensional imaging of spin waves has so far not been possible. Here, we image the three-dimensional dynamics of spin waves excited in a synthetic antiferromagnet, with nanoscale spatial resolution and sub-ns temporal resolution, using time-resolved magnetic laminography. In this way, we map the distribution of the spin-wave modes throughout the volume of the structure, revealing unexpected depth-dependent profiles originating from the interlayer dipolar interaction. We experimentally demonstrate the existence of complex three-dimensional interference patterns and analyze them via micromagnetic modelling. We find that these patterns are generated by the superposition of spin waves with non-uniform amplitude profiles, and that their features can be controlled by tuning the composition and structure of the magnetic system. Our results open unforeseen possibilities for the study and manipulation of complex spin-wave modes within nanostructures and magnonic devices. △ Less

Submitted 18 April, 2024; v1 submitted 27 June, 2023; originally announced June 2023.

Comments: 18 pages, 4 figures

Journal ref: Nat Commun 15, 3057 (2024)

Determination of optimal experimental conditions for accurate 3D reconstruction of the magnetization vector via XMCD-PEEM

Authors: Miguel A. Cascales Sandoval, A. Hierro-Rodríguez, S. Ruiz-Gómez, L. Skoric, C. Donnelly, M. A. Niño, D. McGrouther, S. McVitie, S. Flewett, N. Jaouen, R. Belkhou, M. Foerster, A. Fernández-Pacheco

Abstract: In this work we present a detailed analysis on the performance of X-ray magnetic circular dichroism photo-emission electron microscopy (XMCD-PEEM) as a tool for vector reconstruction of the magnetization. For this, we choose 360$^{\circ}$ domain wall ring structures which form in a synthetic antiferromagnet as our model to conduct the quantitative analysis. We assess how the quality of the results… ▽ More In this work we present a detailed analysis on the performance of X-ray magnetic circular dichroism photo-emission electron microscopy (XMCD-PEEM) as a tool for vector reconstruction of the magnetization. For this, we choose 360$^{\circ}$ domain wall ring structures which form in a synthetic antiferromagnet as our model to conduct the quantitative analysis. We assess how the quality of the results is affected depending on the number of projections that are involved in the reconstruction process, as well as their angular distribution. For this we develop a self-consistent error metric, which indicates that the main factor of improvement comes from selecting the projections evenly spread out in space, over having a larger number of these spanning a smaller angular range. This work thus poses XMCD-PEEM as a powerful tool for vector imaging of complex 3D magnetic structures. △ Less

Submitted 25 April, 2024; v1 submitted 16 May, 2023; originally announced May 2023.

Observation and formation mechanism of 360° domain wall rings in Synthetic Anti-Ferromagnets with interlayer chiral interactions

Authors: Miguel A. Cascales Sandoval, A Hierro-Rodríguez, S. Ruiz-Gómez, L. Skoric, C. Donnelly, M. A. Niño, Elena Y. Vedmedenko, D. McGrouther, S. McVitie, S. Flewett, N. Jaouen, M. Foerster, A. Fernández-Pacheco

Abstract: The Interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) chirally couples spins in different ferromagnetic layers of multilayer heterostructures. So far, samples with IL-DMI have been investigated utilizing magnetometry and magnetotransport techniques, where the interaction manifests as a tunable chiral exchange bias field. Here, we investigate the nanoscale configuration of the magnetization vec… ▽ More The Interlayer Dzyaloshinskii-Moriya interaction (IL-DMI) chirally couples spins in different ferromagnetic layers of multilayer heterostructures. So far, samples with IL-DMI have been investigated utilizing magnetometry and magnetotransport techniques, where the interaction manifests as a tunable chiral exchange bias field. Here, we investigate the nanoscale configuration of the magnetization vector in a synthetic anti-ferromagnet (SAF) with IL-DMI, after applying demagnetizing field sequences. We add different global magnetic field offsets to the demagnetizing sequence in order to investigate the states that form when the IL-DMI exchange bias field is fully or partially compensated. For magnetic imaging and vector reconstruction of the remanent magnetic states we utilize X-ray magnetic circular dichroism photoemission electron microscopy, evidencing the formation of 360$^{\circ}$ domain wall rings of typically 0.5-3.0 $μm$ in diameter. These spin textures are only observed when the exchange bias field due to the IL-DMI is not perfectly compensated by the magnetic field offset. From a combination of micromagnetic simulations, magnetic charge distribution and topology arguments, we conclude that a non-zero remanent effective field with components both parallel and perpendicular to the anisotropy axis of the SAF is necessary to observe the rings. This work shows how the exchange bias field due to IL-DMI can lead to complex metastable spin states during reversal, important for the development of novel spintronic devices. △ Less

Submitted 15 May, 2023; v1 submitted 12 May, 2023; originally announced May 2023.

High-resolution three-dimensional imaging of topological textures in single-diamond networks

Authors: Dmitry Karpov, Kenza Djeghdi, Mirko Holler, S. Narjes Abdollahi, Karolina Godlewska, Claire Donnelly, Takeshi Yuasa, Hiroaki Sai, Ulrich B. Wiesner, Bodo D. Wilts, Ullrich Steiner, Michimasa Musya, Shunsuke Fukami, Hideo Ohno, Ilja Gunkel, Ana Diaz, Justin Llandro

Abstract: Highly periodic structures are often said to convey the beauty of nature. However, most material properties are strongly influenced by the defects they contain. On the mesoscopic scale, molecular self-assembly exemplifies this interplay; thermodynamic principles determine short-range order, but long-range order is mainly impeded by the kinetic history of the material and by thermal fluctuations. F… ▽ More Highly periodic structures are often said to convey the beauty of nature. However, most material properties are strongly influenced by the defects they contain. On the mesoscopic scale, molecular self-assembly exemplifies this interplay; thermodynamic principles determine short-range order, but long-range order is mainly impeded by the kinetic history of the material and by thermal fluctuations. For the development of self-assembly technologies, it is imperative to characterise and understand the interplay between self-assembled order and defect-induced disorder. Here we used synchrotron-based hard X-ray nanotomography to reveal a pair of extended topological defects within a self-assembled single-diamond network morphology. These defects are morphologically similar to the comet and trefoil patterns of equal and opposite half-integer topological charges observed in liquid crystals and appear to maintain a constant separation across the thickness of the sample, resembling pairs of full vortices in superconductors and other hard condensed matter systems. These results are expected to open new windows to study defect formation in soft condensed matter, particularly in biological systems where most structures are formed by self-assembly. △ Less

Submitted 28 April, 2023; originally announced April 2023.

X-ray nanotomography reveals formation of single diamonds by block copolymer self-assembly

Authors: Kenza Djeghdi, Dmitry Karpov, S. Narjes Abdollahi, Karolina Godlewska, Mirko Holler, Claire Donnelly, Takeshi Yuasa, Hiroaki Sai, Ulrich B. Wiesner, Ullrich Steiner, Bodo D. Wilts, Michimasa Musya, Shunsuke Fukami, Hideo Ohno, Ana Diaz, Justin Llandro, Ilja Gunkel

Abstract: Block copolymers are recognised as a valuable platform for creating nanostructured materials with unique properties. Morphologies formed by block copolymer self-assembly can be transferred into a wide range of inorganic materials, enabling applications including energy storage and metamaterials. However, imaging of the underlying, often complex, nanostructures in large volumes has remained a chall… ▽ More Block copolymers are recognised as a valuable platform for creating nanostructured materials with unique properties. Morphologies formed by block copolymer self-assembly can be transferred into a wide range of inorganic materials, enabling applications including energy storage and metamaterials. However, imaging of the underlying, often complex, nanostructures in large volumes has remained a challenge, limiting progress in materials development. Taking advantage of recent advances in X-ray nanotomography, we non-invasively imaged exceptionally large volumes of nanostructured soft materials at high resolution, revealing a single diamond morphology in a triblock terpolymer composite network. This morphology, which is ubiquitous in nature, has so far remained elusive in block copolymers, despite its potential to create materials with large photonic bandgaps. The discovery was made possible by the precise analysis of distortions in a large volume of the self-assembled diamond network, which are difficult to unambiguously assess using traditional characterisation tools. We anticipate that high-resolution X-ray nanotomography, which allows imaging of much larger sample volumes than electron-based tomography, will become a powerful tool for the quantitative analysis of complex nanostructures and that structures such as the triblock terpolymer-directed single diamond will enable the generation of advanced multicomponent composites with hitherto unknown property profiles. △ Less

Submitted 1 May, 2023; v1 submitted 24 April, 2023; originally announced April 2023.

Comments: updated reference 38; added reference 40; corrected name of one author; corrected one affiliation; corrected legend in Extended Data Fig. 3

Three-dimensional tomographic imaging of the magnetization vector field using Fourier transform holography

Authors: Marisel Di Pietro Martínez, Alexis Wartelle, Carlos Herrero Martínez, Farid Fettar, Florent Blondelle, Jean-François Motte, Claire Donnelly, Luke Turnbull, Feodor Ogrin, Gerrit van der Laan, Horia Popescu, Nicolas Jaouen, Flora Yakhou-Harris, Guillaume Beutier

Abstract: In recent years, interest in expanding from 2D to 3D systems has grown in the magnetism community, from exploring new geometries to broadening the knowledge on the magnetic textures present in thick samples, and with this arise the need for new characterization techniques, in particular tomographic imaging. Here, we present a new tomographic technique based on Fourier transform holography, a lensl… ▽ More In recent years, interest in expanding from 2D to 3D systems has grown in the magnetism community, from exploring new geometries to broadening the knowledge on the magnetic textures present in thick samples, and with this arise the need for new characterization techniques, in particular tomographic imaging. Here, we present a new tomographic technique based on Fourier transform holography, a lensless imaging technique that uses a known reference in the sample to retrieve the object of interest from its diffraction pattern in one single step of calculation, overcoming the phase problem inherent to reciprocal-space-based techniques. Moreover, by exploiting the phase contrast instead of the absorption contrast, thicker samples can be investigated. We obtain a 3D full-vectorial image of a 800 nm-thick extended Fe/Gd multilayer in a 5$μ$m-diameter circular field of view with a resolution of approximately 80 nm. The 3D image reveals worm-like domains with magnetization pointing mostly out of plane near the surface of the sample but that falls in-plane near the substrate. Since the FTH setup is fairly simple, it allows modifying the sample environment. Therefore, this technique could enable in particular a 3D view of the magnetic configuration's response to an external magnetic field. △ Less

Submitted 20 December, 2022; originally announced December 2022.

Comments: 11 pages, 8 figures

Controlled Evolution of Three-Dimensional Magnetic States in Strongly Coupled Cylindrical Nanowire Pairs

Authors: J Fullerton, A Hierro-Rodriguez, C Donnelly, D Sanz-Hernández, L Skoric, D A MacLaren, A Fernández-Pacheco

Abstract: Cylindrical magnetic nanowires are promising systems for the development of three-dimensional spintronic devices. Here, we simulate the evolution of magnetic states during fabrication of strongly-coupled cylindrical nanowires with varying degrees of overlap. By varying the separation between wires, the relative strength of exchange and magnetostatic coupling can be tuned. Hence leading to the form… ▽ More Cylindrical magnetic nanowires are promising systems for the development of three-dimensional spintronic devices. Here, we simulate the evolution of magnetic states during fabrication of strongly-coupled cylindrical nanowires with varying degrees of overlap. By varying the separation between wires, the relative strength of exchange and magnetostatic coupling can be tuned. Hence leading to the formation of six fundamental states as a function of both inter-wire separation and wire height. In particular, two complex three-dimensional magnetic states, a 3D Landau Pattern and a Helical Domain wall, are observed to emerge for intermediate overlap. The competition of magnetic interactions and the parallel growth scheme we follow (growing both wires at the same time) favours the formation of these anti-parallel metastable states. This works shows how the engineering of strongly coupled 3D nanostructures with competing interactions can be used to create complex spin textures. △ Less

Submitted 28 September, 2022; originally announced September 2022.

Three-dimensional Resonant Magnetization Dynamics Unraveled by Time-Resolved Soft X-ray Laminography

Authors: Simone Finizio, Claire Donnelly, Sina Mayr, Ales Hrabec, Jörg Raabe

Abstract: The imaging of magneto-dynamical processes has been, so far, mostly a two-dimensional business, due to the constraints of the available experimental techniques. In this manuscript, building on the recent developments of soft X-ray magnetic laminography, we present an experimental setup where magneto-dynamical processes can be resolved in all three spatial dimensions and in time, with the possibili… ▽ More The imaging of magneto-dynamical processes has been, so far, mostly a two-dimensional business, due to the constraints of the available experimental techniques. In this manuscript, building on the recent developments of soft X-ray magnetic laminography, we present an experimental setup where magneto-dynamical processes can be resolved in all three spatial dimensions and in time, with the possibility to freely tune the frequency of the dynamical process. We then employ this setup to investigate the three-dimensional dynamics of two resonant magneto-dynamical modes in a CoFeB microstructure occurring at different frequencies, namely the fundamental vortex gyration mode and a magnetic field-induced domain wall excitation mode. This new technique provides much needed capabilities for the experimental investigation of the magnetization dynamics of three-dimensional magnetic systems. △ Less

Submitted 26 November, 2021; originally announced November 2021.

Domain wall automotion in three-dimensional magnetic helical interconnectors

Authors: L. Skoric, C. Donnelly, A. Hierro-Rodriguez, S. Ruiz-Gómez, M. Foerster, M. A. Niño Orti, R. Belkhou, C. Abert, D. Suess, A. Fernández-Pacheco

Abstract: The fundamental limits currently faced by traditional computing devices necessitate the exploration of new ways to store, compute and transmit information. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nano… ▽ More The fundamental limits currently faced by traditional computing devices necessitate the exploration of new ways to store, compute and transmit information. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work provides new possibilities for efficient transfer of magnetic information in three dimensions. △ Less

Submitted 9 October, 2021; originally announced October 2021.

Micromagnetic modelling of magnetic domain walls in curved cylindrical nanotubes and nanowires

Authors: L. Skoric, C. Donnelly, C. Abert, A. Hierro-Rodriguez, D. Suess, A. Fernández-Pacheco

Abstract: We investigate the effect of curvature on the energy and stability of domain wall configurations in curved cylindrical nanotubes and nanowires. We use micromagnetic simulations to calculate the phase diagram for the transverse wall (TW) and vortex wall (VW) states in tubes, finding the ground state configuration and the metastability region where both types of walls can exist. The introduction of… ▽ More We investigate the effect of curvature on the energy and stability of domain wall configurations in curved cylindrical nanotubes and nanowires. We use micromagnetic simulations to calculate the phase diagram for the transverse wall (TW) and vortex wall (VW) states in tubes, finding the ground state configuration and the metastability region where both types of walls can exist. The introduction of curvature shifts the range for which the TW is the ground state domain wall to higher diameters, and increases the range of metastability. We interpret this behavior to be primarily due to the curvature-induced effective Dzyaloshinskii-Moriya term in the exchange energy. Furthermore, we demonstrate qualitatively the same behavior in solid cylindrical nanowires. Comparing both tubes and wires, we observe how while in tubes curvature tends to suppress the transformation from the TW to VW, in wires it promotes the transformation of the VW containing the Bloch point into the TW. These findings have important implications in the fundamental understanding of domain walls in 3D geometries, and the design of future domain wall devices. △ Less

Submitted 18 March, 2021; originally announced March 2021.

Non-planar geometrical effects on the magnetoelectrical signal in a three-dimensional nanomagnetic circuit

Authors: Fanfan Meng, Claire Donnelly, Claas Abert, Luka Skoric, Stuart Holmes, Zhuocong Xiao, Jung-Wei Liao, Peter J. Newton, Crispin H. W. Barnes, Dédalo Sanz-Hernández, Aurelio Hierro-Rodriguez, Dieter Suess, Russell P. Cowburn, Amalio Fernández-Pacheco

Abstract: Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a micr… ▽ More Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a microelectronic circuit using direct-write nanofabrication. Due to the 3D vectorial nature of both electrical current and magnetisation, a complex superposition of several magnetoelectrical effects takes place. By performing electrical measurements under the application of 3D magnetic fields, in combination with macrospin simulations and finite element modelling, we disentangle the superimposed effects, finding how a 3D geometry leads to unusual angular dependences of well-known magnetotransport effects such as the anomalous Hall effect. Crucially, our analysis also reveals a strong role of the noncollinear demagnetising fields intrinsic to 3D nanostructures, which results in an angular dependent magnon magnetoresistance contributing strongly to the total magnetoelectrical signal. These findings are key to the understanding of 3D spintronic systems and underpin further fundamental and device-based studies. △ Less

Submitted 18 November, 2020; originally announced November 2020.

Experimental Observation of Vortex Rings in a Bulk Magnet

Authors: Claire Donnelly, Konstantin L. Metlov, Valerio Scagnoli, Manuel Guizar-Sicairos, Mirko Holler, Nicholas S. Bingham, Jörg Raabe, Laura J. Heyderman, Nigel Cooper, Sebastian Gliga

Abstract: Vortex rings are remarkably stable structures occurring in numerous systems: for example in turbulent gases, where they are at the origin of weather phenomena [1]; in fluids with implications for biology [2]; in electromagnetic discharges [3]; and in plasmas [4]. While vortex rings have also been predicted to exist in ferromagnets [5], they have not yet been observed. Using X-ray magnetic nanotomo… ▽ More Vortex rings are remarkably stable structures occurring in numerous systems: for example in turbulent gases, where they are at the origin of weather phenomena [1]; in fluids with implications for biology [2]; in electromagnetic discharges [3]; and in plasmas [4]. While vortex rings have also been predicted to exist in ferromagnets [5], they have not yet been observed. Using X-ray magnetic nanotomography [6], we imaged three-dimensional structures forming closed loops in a bulk micromagnet, each composed of a vortex-antivortex pair. Based on the magnetic vorticity, a quantity analogous to hydrodynamic vorticity, we identify these configurations as magnetic vortex rings. While such structures have been predicted to exist as transient states in exchange ferromagnets [5], the vortex rings we observe exist as stable, static configurations, whose stability we attribute to the dipolar interaction. In addition, we observe stable vortex loops intersected by magnetic singularities [7], at which the magnetisation within the vortex and antivortex cores reverses. We gain insight into the stability of these states through field and thermal equilibration protocols. These measurements pave the way for the observation of complex three-dimensional solitons in bulk magnets, as well as for the development of applications based on three-dimensional magnetic structures. △ Less

Submitted 9 September, 2020; originally announced September 2020.

Imaging three-dimensional nanoscale magnetization dynamics

Authors: Claire Donnelly, Simone Finizio, Sebastian Gliga, Mirko Holler, Aleš Hrabec, Michal Odstrčil, Sina Mayr, Valerio Scagnoli, Laura J. Heyderman, Manuel Guizar-Sicairos, Jörg Raabe

Abstract: The ability to experimentally map the three-dimensional structure and dynamics in bulk and patterned three-dimensional ferromagnets is essential both for understanding fundamental micromagnetic processes, as well as for investigating technologically-relevant micromagnets whose functions are connected to the presence and dynamics of fundamental micromagnetic structures, such as domain walls and vor… ▽ More The ability to experimentally map the three-dimensional structure and dynamics in bulk and patterned three-dimensional ferromagnets is essential both for understanding fundamental micromagnetic processes, as well as for investigating technologically-relevant micromagnets whose functions are connected to the presence and dynamics of fundamental micromagnetic structures, such as domain walls and vortices. Here, we demonstrate time-resolved magnetic laminography, a technique which offers access to the temporal evolution of a complex three-dimensional magnetic structure with nanoscale resolution. We image the dynamics of the complex three-dimensional magnetization state in a two-phase bulk magnet with a lateral spatial resolution of 50 nm, map** the transition between domain wall precession and the dynamics of a uniform magnetic domain that is attributed to variations in the magnetization state across the phase boundary. The capability to probe three-dimensional magnetic structures with temporal resolution paves the way for the experimental investigation of novel functionalities arising from dynamic phenomena in bulk and three-dimensional patterned nanomagnets. △ Less

Submitted 22 January, 2020; originally announced January 2020.

Comments: Nat. Nanotechnol. (2020)

Artificial double-helix for geometrical control of magnetic chirality

Authors: Dédalo Sanz-Hernández, Aurelio Hierro-Rodriguez, Claire Donnelly, Javier Pablo-Navarro, Andrea Sorrentino, Eva Pereiro, César Magén, Stephen McVitie, José María de Teresa, Salvador Ferrer, Peter Fischer, Amalio Fernández-Pacheco

Abstract: Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currentl… ▽ More Chirality plays a major role in nature, from particle physics to DNA, and its control is much sought-after due to the scientific and technological opportunities it unlocks. For magnetic materials, chiral interactions between spins promote the formation of sophisticated swirling magnetic states such as skyrmions, with rich topological properties and great potential for future technologies. Currently, chiral magnetism requires either a restricted group of natural materials or synthetic thin-film systems that exploit interfacial effects. Here, using state-of-the-art nanofabrication and magnetic X-ray microscopy, we demonstrate the imprinting of complex chiral spin states via three-dimensional geometric effects at the nanoscale. By balancing dipolar and exchange interactions in an artificial ferromagnetic double-helix nanostructure, we create magnetic domains and domain walls with a well-defined spin chirality, determined solely by the chiral geometry. We further demonstrate the ability to create confined 3D spin textures and topological defects by locally interfacing geometries of opposite chirality. The ability to create chiral spin textures via 3D nano-patterning alone enables exquisite control over the properties and location of complex topological magnetic states, of great importance for the development of future metamaterials and devices in which chirality provides enhanced functionality. △ Less

Submitted 20 January, 2020; originally announced January 2020.

Comments: 8 pages, 3 figures

Imaging three-dimensional magnetic systems with X-rays

Authors: Claire Donnelly, Valerio Scagnoli

Abstract: Recent progress in nanofabrication and additive manufacturing have facilitated the building of nanometer-scale three-dimensional structures, that promise to lead to an emergence of new functionalities within a number of fields, compared to state-of-the-art two dimensional systems. In magnetism, the move to three-dimensional systems offers the possibility for novel magnetic properties not available… ▽ More Recent progress in nanofabrication and additive manufacturing have facilitated the building of nanometer-scale three-dimensional structures, that promise to lead to an emergence of new functionalities within a number of fields, compared to state-of-the-art two dimensional systems. In magnetism, the move to three-dimensional systems offers the possibility for novel magnetic properties not available in planar systems, as well as enhanced performance, both of which are key for the development of new technological applications. In this review paper we will focus our attention on three-dimensional magnetic systems and how their magnetic configuration can be retrieved using X-ray magnetic nanotomography. △ Less

Submitted 8 November, 2019; v1 submitted 19 September, 2019; originally announced September 2019.

Journal ref: J. Phys.: Condens. Matter 32 213001 (2020)

Layer-by-layer growth of complex-shaped three-dimensional nanostructures with focused electron beams

Authors: L. Skoric, D. Sanz-Hernández, F. Meng, C. Donnelly, S. Merino-Aceituno, A. Fernández-Pacheco

Abstract: The fabrication of three-dimensional (3D) nanostructures is of great interest to many areas of nanotechnology currently challenged by fundamental limitations of conventional lithography. One of the most promising direct-write methods for 3D nanofabrication is focused electron beam-induced deposition (FEBID), owing to its high spatial resolution and versatility. Here we extend FEBID to the growth o… ▽ More The fabrication of three-dimensional (3D) nanostructures is of great interest to many areas of nanotechnology currently challenged by fundamental limitations of conventional lithography. One of the most promising direct-write methods for 3D nanofabrication is focused electron beam-induced deposition (FEBID), owing to its high spatial resolution and versatility. Here we extend FEBID to the growth of complex-shaped 3D nanostructures by combining the layer-by-layer approach of conventional macroscopic 3D printers and the proximity effect correction of electron beam lithography. This framework is based on the continuum FEBID model and is capable of adjusting for a wide range of effects present during deposition, including beam-induced heating, defocussing and gas flux anisotropies. We demonstrate the capabilities of our platform by fabricating free-standing nanowires, surfaces with varying curvatures and topologies, and general 3D objects, directly from standard stereolithography (STL) files and using different precursors. Real 3D nanoprinting as demonstrated here opens up exciting avenues for the study and exploitation of 3D nanoscale phenomena. △ Less

Submitted 28 August, 2019; originally announced August 2019.

Comments: 15 pages, 4 figures

Stochastic single flux quantum neuromorphic computing using magnetically tunable Josephson junctions

Authors: S. E. Russek, C. A. Donnelly, M. L. Schneider, B. Baek, M. R. Pufall, W. H. Rippard, P. F. Hopkins, P. D. Dresselhaus, S. P. Benz

Abstract: Single flux quantum (SFQ) circuits form a natural neuromorphic technology with SFQ pulses and superconducting transmission lines simulating action potentials and axons, respectively. Here we present a new component, magnetic Josephson junctions, that have a tunablility and re-configurability that was lacking from previous SFQ neuromorphic circuits. The nanoscale magnetic structure acts as a tunabl… ▽ More Single flux quantum (SFQ) circuits form a natural neuromorphic technology with SFQ pulses and superconducting transmission lines simulating action potentials and axons, respectively. Here we present a new component, magnetic Josephson junctions, that have a tunablility and re-configurability that was lacking from previous SFQ neuromorphic circuits. The nanoscale magnetic structure acts as a tunable synaptic constituent that modifies the junction critical current. These circuits can operate near the thermal limit where stochastic firing of the neurons is an essential component of the technology. This technology has the ability to create complex neural systems with greater than 10^21 neural firings per second with approximately 1 W dissipation. △ Less

Submitted 12 November, 2016; originally announced December 2016.

Comments: 2016 IEEE International Conference on Rebooting Computing (ICRC)

High Resolution Hard X-ray Magnetic Imaging with Dichroic Ptychography

Authors: Claire Donnelly, Valerio Scagnoli, Manuel Guizar-Sicairos, Mirko Holler, Fabrice Wilhelm, Francois Guillou, Andrei Rogalev, Carsten Detlefs, Andreas Menzel, Joerg Raabe, Laura J. Heyderman

Abstract: Imaging the magnetic structure of a material is essential to understanding the influence of the physical and chemical microstructure on its magnetic properties. Magnetic imaging techniques, however, have up to now been unable to probe 3D micrometer-sized systems with nanoscale resolution. Here we present the imaging of the magnetic domain configuration of a micrometre-thick FeGd multilayer with ha… ▽ More Imaging the magnetic structure of a material is essential to understanding the influence of the physical and chemical microstructure on its magnetic properties. Magnetic imaging techniques, however, have up to now been unable to probe 3D micrometer-sized systems with nanoscale resolution. Here we present the imaging of the magnetic domain configuration of a micrometre-thick FeGd multilayer with hard X-ray dichroic ptychography at energies spanning both the Gd L3 edge and the Fe K edge, providing a high spatial resolution spectroscopic analysis of the complex X-ray magnetic circular dichroism. With a spatial resolution reaching 45 nm, this advance in hard X-ray magnetic imaging is the first step towards the investigation of buried magnetic structures and extended three-dimensional magnetic systems at the nanoscale. △ Less

Submitted 19 July, 2016; v1 submitted 11 March, 2016; originally announced March 2016.

Journal ref: Phys. Rev. B 94, 064421 (2016)

Pattern Formation on Networks with Reactions: A Continuous Time Random Walk Approach

Authors: Christopher N. Angstmann, Isaac C. Donnelly, Bruce I. Henry

Abstract: We derive the generalized master equation for reaction-diffusion on networks from an underlying stochastic process, the continuous time random walk (CTRW). The non-trivial incorporation of the reaction process into the CTRW is achieved by splitting the derivation into two stages. The reactions are treated as birth-death processes and the first stage of the derivation is at the single particle leve… ▽ More We derive the generalized master equation for reaction-diffusion on networks from an underlying stochastic process, the continuous time random walk (CTRW). The non-trivial incorporation of the reaction process into the CTRW is achieved by splitting the derivation into two stages. The reactions are treated as birth-death processes and the first stage of the derivation is at the single particle level, taking into account the death process, whilst the second stage considers an ensemble of these particles including the birth process. Using this model we have investigated different types of pattern formation across the vertices on a range of networks. Importantly, the CTRW defines the Laplacian operator on the network in a non \emph{ad-hoc} manner and the pattern formation depends on the structure of this Laplacian. Here we focus attention on CTRWs with exponential waiting times for two cases; one in which the rate parameter is constant for all vertices and the other where the rate parameter is proportional to the vertex degree. This results in nonsymmetric and symmetric CTRW Laplacians respectively. In the case of symmetric Laplacians, pattern formation follows from the Turing instability. However in nonsymmetric Laplacians, pattern formation may be possible with or without a Turing instability. △ Less

Submitted 10 March, 2013; v1 submitted 27 November, 2012; originally announced November 2012.

Comments: 27 pages, 10 figures

MSC Class: 35K57; 60G22; 82C41; 60K35; 60J60

Journal ref: Angstmann, C. N. and Donnelly, I. C. and Henry, B. I., Phys. Rev. E 87, 032804 (2013)