-
On-liquid-gallium surface synthesis of ultra-smooth conductive metal-organic framework thin films
Authors:
**xin Liu,
Yunxu Chen,
Xing Huang,
Yanhan Ren,
Mike Hambsch,
David Bodesheim,
Darius Pohl,
Xiaodong Li,
Marielle Deconinck,
Bowen Zhang,
Markus Löffler,
Zhongquan Liao,
Fengxiang Zhao,
Arezoo Dianat,
Gianaurelio Cuniberti,
Yana Vaynzof,
Junfeng Gao,
**gcheng Hao,
Stefan C. B. Mannsfeld,
Xinliang Feng,
Renhao Dong
Abstract:
Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electro…
▽ More
Conductive metal-organic frameworks (MOFs) are emerging electroactive materials for (opto-)electronics. However, it remains a great challenge to achieve reliable MOF-based devices via the existing synthesis methods that are compatible with the complementary metal-oxide-semiconductor technology, as the surface roughness of thus-far synthetic MOF films or pellets is rather high for efficient electrode contact. Here, we develop an on-liquid-gallium surface synthesis (OLGSS) strategy under chemical vapor deposition (CVD) conditions for the controlled growth of two-dimensional conjugated MOF (2D c-MOF) thin films with ten-fold improvement of surface flatness (surface roughness can reach as low as ~2 Å) compared with MOF films grown by the traditional methods. Supported by theoretical modeling, we unveil a layer-by-layer CVD growth mode for constructing flattening surfaces, that is triggered by the high adhesion energy between gallium (Ga) and planar aromatic ligands. We further demonstrate the generality of the as-proposed OLGSS strategy by reproducing such a flat surface over nine different 2D c-MOF films with variable thicknesses (~2 to 208 nm) and large lateral sizes (over 1 cm2). The resultant ultra-smooth 2D c-MOF films enable the formation of high-quality electrical contacts with gold (Au) electrodes, leading to a reduction of contact resistance by over ten orders of magnitude compared to the traditional uneven MOF films. Furthermore, due to the efficient interfacial interaction benifited from the high-quality contacts, the prepared van der Waals heterostructure (vdWH) of OLGSS c-MOF and MoS2 exhibits intriguing photoluminescence (PL) enhancement, PL peak shift and large work function modulation. The establishment of the reliable OLGSS method provides the chances to push the development of MOF electronics and the construction of multicomponent MOF-based heterostructure materials.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Towards coarse-grained elasticity of single-layer Covalent Organic Frameworks
Authors:
Alexander Croy,
Antonios Raptakis,
David Bodesheim,
Arezoo Dianat,
Gianaurelio Cuniberti
Abstract:
Two-dimensional covalent organic frameworks (2D COFs) are an interesting class of 2D materials since their reticular synthesis allows the tailored design of structures and functionalities. For many of their applications the mechanical stability and performance is an important aspect. Here, we use a computational approach involving a density-functional based tight-binding method to calculate the in…
▽ More
Two-dimensional covalent organic frameworks (2D COFs) are an interesting class of 2D materials since their reticular synthesis allows the tailored design of structures and functionalities. For many of their applications the mechanical stability and performance is an important aspect. Here, we use a computational approach involving a density-functional based tight-binding method to calculate the in-plane elastic properties of about 40 COFs with a honeycomb lattice. Based on those calculations, we develop two coarse-grained descriptions: one based on a spring network and the second using a network of elastic beams. The models allow us to connect the COF force constants to the molecular force constants of the linker molecules and thus enable an efficient description of elastic deformations. To illustrate this aspect, we calculate the deformation energy of different COFs containing the equivalent of a Stone-Wales defect and find very good agreement with the coarse-grained description.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
The contribution of intermolecular spin interactions to the London dispersion forces between chiral molecules
Authors:
M. Geyer,
R. Gutierrez,
V. Mujica,
J. F. Rivas Silva,
A. Dianat,
G. Cuniberti
Abstract:
Dispersion interactions are one of the components of van der Waals (vdW) forces, which play a key role in the understanding of intermolecular interactions in many physical, chemical and biological processes. The theory of dispersion forces was developed by London in the early years of quantum mechanics. However, it was only in the 1960s that it was recognized that for molecules lacking an inversio…
▽ More
Dispersion interactions are one of the components of van der Waals (vdW) forces, which play a key role in the understanding of intermolecular interactions in many physical, chemical and biological processes. The theory of dispersion forces was developed by London in the early years of quantum mechanics. However, it was only in the 1960s that it was recognized that for molecules lacking an inversion center such as chiral and helical molecules, there are chirality-sensitive corrections to the dispersion forces proportional to the rotatory power known from the theory of circular dichroism and with the same distance scaling law R-6 as the London energy. The discovery of the Chirality-Induced Spin Selectivity (CISS) effect in recent years has led to an additional twist in the study of chiral molecular systems, showing a close relation between spin and molecular geometry. Motivated by it, we propose in this investigation to describe the mutual induction of charge and spin-density fluctuations in a pair A-B of chiral molecules by a simple physical model. The model assumes that the same fluctuating electric fields responsible for vdW forces can induce a magnetic response via a Rashba-like term, so that an spin-orbit field acting on molecule B is generated by the electric field arising from charge density fluctuations in molecule A (and viceversa). Within a second-order perturbative approach, these contributions manifest as an effective intermolecular exchange interaction. Although expected to be weaker than the standard London forces, these interactions display the same R$^6$ distance scaling.
△ Less
Submitted 9 May, 2022; v1 submitted 11 June, 2021;
originally announced June 2021.
-
Role of Exchange Interactions in the Magnetic Response and Intermolecular Recognition of Chiral Molecules
Authors:
Arezoo Dianat,
Rafael Gutierrez,
Hen Alpern,
Vladimiro Mujica,
Amir Ziv,
Shira Yochelis,
Oded Millo,
Yossi Paltiel,
Gianaurelio Cuniberti
Abstract:
The physical origin of the so-called chirality-induced spin selectivity (CISS) effect has puzzled experimental and theoretical researchers over the past few years. Early experiments were interpreted in terms of unconventional spin-orbit interactions mediated by the helical geometry. However, more recent experimental studies have clearly revealed that electronic exchange interactions also play a ke…
▽ More
The physical origin of the so-called chirality-induced spin selectivity (CISS) effect has puzzled experimental and theoretical researchers over the past few years. Early experiments were interpreted in terms of unconventional spin-orbit interactions mediated by the helical geometry. However, more recent experimental studies have clearly revealed that electronic exchange interactions also play a key role in the magnetic response of chiral molecules in singlet states. In this investigation, we use spin-polarized closed shell density functional theory calculations to address the influence of exchange contributions to the interaction between helical molecules as well as of helical molecules with magnetized substrates. We show that exchange effects result in differences in the interaction properties with magnetized surfaces, shedding light into the possible origin of two recent important experimental results: enantiomer separation and magnetic exchange force microscopy with AFM tips functionalized with helical peptides.
△ Less
Submitted 7 April, 2021;
originally announced April 2021.
-
A Chirality-Based Quantum Leap
Authors:
Clarice D. Aiello,
Muneer Abbas,
John M. Abendroth,
Andrei Afanasev,
Shivang Agarwal,
Amartya S. Banerjee,
David N. Beratan,
Jason N. Belling,
Bertrand Berche,
Antia Botana,
Justin R. Caram,
Giuseppe Luca Celardo,
Gianaurelio Cuniberti,
Aitzol Garcia-Etxarri,
Arezoo Dianat,
Ismael Diez-Perez,
Yuqi Guo,
Rafael Gutierrez,
Carmen Herrmann,
Joshua Hihath,
Suneet Kale,
Philip Kurian,
Ying-Cheng Lai,
Alexander Lopez,
Ernesto Medina
, et al. (19 additional authors not shown)
Abstract:
Chiral degrees of freedom occur in matter and in electromagnetic fields and constitute an area of research that is experiencing renewed interest driven by recent observations of the chiral-induced spin selectivity (CISS) effect in chiral molecules and engineered nanomaterials. The CISS effect underpins the fact that charge transport through nanoscopic chiral structures favors a particular electron…
▽ More
Chiral degrees of freedom occur in matter and in electromagnetic fields and constitute an area of research that is experiencing renewed interest driven by recent observations of the chiral-induced spin selectivity (CISS) effect in chiral molecules and engineered nanomaterials. The CISS effect underpins the fact that charge transport through nanoscopic chiral structures favors a particular electronic spin orientation, resulting in large room-temperature spin polarizations. Observations of the CISS effect suggest opportunities for spin control and for the design and fabrication of room-temperature quantum devices from the bottom up, with atomic-scale precision. Any technology that relies on optimal charge transport, including quantum devices for logic, sensing, and storage, may benefit from chiral quantum properties. These properties can be theoretically and experimentally investigated from a quantum information perspective, which is presently lacking. There are uncharted implications for the quantum sciences once chiral couplings can be engineered to control the storage, transduction, and manipulation of quantum information. This forward-looking perspective provides a survey of the experimental and theoretical fundamentals of chiral-influenced quantum effects, and presents a vision for their future roles in enabling room-temperature quantum technologies.
△ Less
Submitted 11 November, 2021; v1 submitted 31 August, 2020;
originally announced September 2020.
-
Understanding the UV luminescence of zinc germanate: The role of native defects
Authors:
Jaime Dolado,
Ruth Martínez-Casado,
Pedro Hidalgo,
Rafael Gutierrez,
Arezoo Dianat,
Gianaurelio Cuniberti,
Francisco Domínguez-Adame,
Elena Díaz,
Bianchi Méndez
Abstract:
Achieving efficient and stable ultraviolet emission is a challenging goal in optoelectronic devices. Herein, we investigate the UV luminescence of zinc germanate Zn2GeO4 microwires by means of photoluminescence measurements as a function of temperature and excitation conditions. The emitted UV light is composed of two bands (a broad one and a narrow one) associated with the native defects structur…
▽ More
Achieving efficient and stable ultraviolet emission is a challenging goal in optoelectronic devices. Herein, we investigate the UV luminescence of zinc germanate Zn2GeO4 microwires by means of photoluminescence measurements as a function of temperature and excitation conditions. The emitted UV light is composed of two bands (a broad one and a narrow one) associated with the native defects structure. In addition, with the aid of density functional theory (DFT) calculations, the energy positions of the electronic levels related to native defects in Zn2GeO4 have been calculated. In particular, our results support that zinc interstitials are the responsible for the narrow UV band, which is, in turn, split into two components with different temperature dependence behaviour. The origin of the two components is explained on the basis of the particular location of Zn_i in the lattice and agrees with DFT calculations. Furthermore, a kinetic luminescence model is proposed to ascertain the temperature evolution of this UV emission. These results pave the way to exploit defect engineering in achieving functional optoelectronic devices to operate in the UV region.
△ Less
Submitted 30 July, 2020;
originally announced July 2020.
-
Electron transport through self-assembled monolayers of tripeptides
Authors:
E. Mervinetsky,
I. Alshanski,
S. Lenfant,
D. Guerin,
L. Medrano Sandonas,
A. Dianat,
R. Gutierrez,
G. Cuniberti,
M. Hurevich,
S. Yitzchaik,
D. Vuillaume
Abstract:
We report how the electron transport through a solid-state metal/Gly-Gly-His tripeptide (GGH) monolayer/metal junction and the metal/GGH work function are modified by the GGH complexation with Cu2+ ions. Conducting AFM is used to measure the current-voltage histograms. The work function is characterized by combining macroscopic Kelvin probe and Kelvin probe force microscopy at the nanoscale. We ob…
▽ More
We report how the electron transport through a solid-state metal/Gly-Gly-His tripeptide (GGH) monolayer/metal junction and the metal/GGH work function are modified by the GGH complexation with Cu2+ ions. Conducting AFM is used to measure the current-voltage histograms. The work function is characterized by combining macroscopic Kelvin probe and Kelvin probe force microscopy at the nanoscale. We observe that the Cu2+ ions complexation with the GGH monolayer is highly dependent on the molecular surface density and results in opposite trends. In the case of a high density monolayer the conformational changes are hindered by the proximity of the neighboring peptides, hence forming an insulating layer in response to copper-complexation. Whereas the slightly lower density monolayers allow for the conformational change to a looped peptide wrap** the Cu-ion, which results in a more conductive monolayer. Copper-ion complexation to the high- and low-density monolayers systematically induces an increase of the work functions. Copper-ion complexation to the low-density monolayer induces an increase of electron transport efficiency, while the copper-ion complexation to the high-density monolayer results in a slight decrease of electron transport. Both of the observed trends are in agreement with first-principle calculations. Complexed copper to low density GGH-monolayer induces a new gap state slightly above the Au Fermi energy that is absent in the high density monolayer.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Combined molecular dynamics and phase-field modelling of crack propagation in defective graphene
Authors:
Arne Claus Hansen-Dörr,
Lennart Wilkens,
Alexander Croy,
Arezoo Dianat,
Gianaurelio Cuniberti,
Markus Kästner
Abstract:
In this work, a combined modelling approach for crack propagation in defective graphene is presented. Molecular dynamics (MD) simulations are used to obtain material parameters (Young's modulus and Poisson ratio) and to determine the energy contributions during the crack evolution. The elastic properties are then applied in phase-field continuum simulations which are based on the Griffith energy c…
▽ More
In this work, a combined modelling approach for crack propagation in defective graphene is presented. Molecular dynamics (MD) simulations are used to obtain material parameters (Young's modulus and Poisson ratio) and to determine the energy contributions during the crack evolution. The elastic properties are then applied in phase-field continuum simulations which are based on the Griffith energy criterion for fracture. In particular, the influence of point defects on elastic properties and the fracture toughness are investigated. For the latter, we obtain values consistent with recent experimental findings. Further, we discuss alternative definitions of an effective fracture toughness, which accounts for the conditions of crack propagation and establishes a link between dynamic, discrete and continuous, quasi-static fracture processes on MD level and continuum level, respectively. It is demonstrated that the combination of MD and phase-field simulations is a well-founded approach to identify defect-dependent material parameters.
△ Less
Submitted 20 March, 2019;
originally announced March 2019.
-
A Structural Insight into Mechanical Strength of Graphene-like Carbon and Carbon Nitride Networks
Authors:
Obaidur Rahaman,
Bohayra Mortazavi,
Arezoo Dianat,
Gianaurelio Cuniberti,
Timon Rabczuk
Abstract:
Graphene, one of the strongest materials ever discovered, triggered the exploration of many 2D materials in the last decade. However, the successful synthesis of a stable nanomaterial requires a rudimentary understanding of the relationship between its structure and strength. In the present study, we investigate the mechanical properties of 8 different carbon-based 2D nanomaterials by performing e…
▽ More
Graphene, one of the strongest materials ever discovered, triggered the exploration of many 2D materials in the last decade. However, the successful synthesis of a stable nanomaterial requires a rudimentary understanding of the relationship between its structure and strength. In the present study, we investigate the mechanical properties of 8 different carbon-based 2D nanomaterials by performing extensive density functional theory calculations. The considered structures were just recently either experimentally synthesized or theoretically predicted. The corresponding stress-strain curves and elastic moduli are reported. They can be useful in training force field parameters for large scale simulations. A comparative analysis of these results revealed a direct relationship between atomic density per area and elastic modulus. Furthermore, for the networks that have an armchair and a zigzag orientation, we observed that they were more stretchable in the zigzag direction than the armchair direction. A critical analysis of the angular distributions and radial distribution functions suggested that it could be due to the higher ability of the networks to suppress the elongations of the bonds in the zigzag direction by deforming the bond angles. The structural interpretations provided in this work not only improve the general understanding of a 2D material's strength but also enables us to rationally design them for higher qualities.
△ Less
Submitted 24 March, 2017;
originally announced March 2017.
-
Metamorphosis in Carbon Network: From Penta-Graphene to Biphenylene under Uniaxial Tension
Authors:
Obaidur Rahaman,
Bohayra Mortazavi,
Arezoo Dianat,
Gianaurelio Cuniberti,
Timon Rabczuk
Abstract:
The power of polymorphism in carbon is vividly manifested by the numerous applications of carbon-based nano-materials. Ranging from environmental issues to biomedical applications, it has the potential to address many of today's dire problems. However, an understanding of the mechanism of transformation between carbon allotropes at a microscopic level is crucial for its development into highly des…
▽ More
The power of polymorphism in carbon is vividly manifested by the numerous applications of carbon-based nano-materials. Ranging from environmental issues to biomedical applications, it has the potential to address many of today's dire problems. However, an understanding of the mechanism of transformation between carbon allotropes at a microscopic level is crucial for its development into highly desirable materials. In this work we report such a phase transformation between two carbon allotropes, from penta-graphene (a semiconductor) into biphenylene (a metal) under uniaxial loading. Using density functional theory we demonstrated that the phase transformation occurs through a synchronized reorganization of the carbon atoms with a simultaneous drop in energy. The results of this work confirms that penta-graphene is a meta-stable structure. On the other hand, a rigorous analysis of biphenylene suggests that it is an energetically, mechanically, dynamically and thermally stable structure, both in the form of a sheet and a tube. Its electronic structure suggests that it is metallic in both these forms. Therefore, this work unravels the possibility of phase transition in 2-D carbon systems and thereby designing nano-materials capable of altering their properties in an instant. Furthermore, heating biphenylene sheet at a high temperature (5000K) revealed another phase transformation into a more stable hexa-graphene like structure. This proposes thermal annealing as a possible method of synthesizing one 2-D carbon allotrope from another.
△ Less
Submitted 24 March, 2017;
originally announced March 2017.
-
Borophene as an anode material for Ca, Mg, Na or Li ion storage: A first-principle study
Authors:
B Mortazavi,
A Dianat,
O Rahaman,
G Cuniberti,
T Rabczuk
Abstract:
Borophene, the boron atom analogue to graphene, being atomic thick have been just recently experimentally fabricated. In this work, we employ first-principles density functional theory calculations to investigate the interaction of Ca, Mg, Na or Li atoms with single-layer and free-standing borophene. We first identified the most stable binding sites and their corresponding binding energies as well…
▽ More
Borophene, the boron atom analogue to graphene, being atomic thick have been just recently experimentally fabricated. In this work, we employ first-principles density functional theory calculations to investigate the interaction of Ca, Mg, Na or Li atoms with single-layer and free-standing borophene. We first identified the most stable binding sites and their corresponding binding energies as well and then we gradually increased the ions concentration. Our calculations predict strong binding energies of around 4.03 eV, 2.09 eV, 2.92 eV and 3.28 eV between the borophene substrate and Ca, Mg, Na or Li ions, respectively. We found that the binding energy generally decreases by increasing the ions content. Using the Bader charge analysis, we evaluate the charge transfer between the adatoms and the borophene sheet. Our investigation proposes the borophene as a 2D material with a remarkably high capacity of around 800 mAh/g, 1960 mAh/g, 1380 mAh/g and 1720 mAh/g for Ca, Mg, Na or Li ions storage, respectively. This study can be useful for the possible application of borophene for the rechargeable ion batteries.
△ Less
Submitted 17 March, 2017;
originally announced March 2017.
-
Application of silicene, germanene and stanene for Na or Li ion storage: A theoretical investigation
Authors:
B Mortazavi,
A Dianat,
G Cuniberti,
T Rabczuk
Abstract:
Silicene, germanene and stanene likely to graphene are atomic thick material with interesting properties. We employed first-principles density functional theory (DFT) calculations to investigate and compare the interaction of Na or Li ions on these films. We first identified the most stable binding sites and their corresponding binding energies for a single Na or Li adatom on the considered membra…
▽ More
Silicene, germanene and stanene likely to graphene are atomic thick material with interesting properties. We employed first-principles density functional theory (DFT) calculations to investigate and compare the interaction of Na or Li ions on these films. We first identified the most stable binding sites and their corresponding binding energies for a single Na or Li adatom on the considered membranes. Then we gradually increased the ions concentration until the full saturation of the surfaces is achieved. Our Bader charge analysis confirmed complete charge transfer between Li or Na ions with the studied 2D sheets. We then utilized nudged elastic band method to analyze and compare the energy barriers for Li or Na ions diffusions along the surface and through the films thicknesses. Our investigation findings can be useful for the potential application of silicene, germanene and stanene for Na or Li ion batteries.
△ Less
Submitted 17 March, 2017;
originally announced March 2017.
-
First-principles investigation of mechanical properties of silicene, germanene and stanene
Authors:
B Mortazavi,
O Rahaman,
M Makaremi,
A Dianat,
G Cuniberti,
T Rabczuk
Abstract:
Two dimensional allotropes of group IV substrates including silicene, germanene and stanene have recently attracted considerable attention in nanodevice fabrication industry. These materials involving the buckled structure have been experimentally fabricated lately. In this study, first principles density functional theory calculations were utilized to investigate the mechanical properties of sing…
▽ More
Two dimensional allotropes of group IV substrates including silicene, germanene and stanene have recently attracted considerable attention in nanodevice fabrication industry. These materials involving the buckled structure have been experimentally fabricated lately. In this study, first principles density functional theory calculations were utilized to investigate the mechanical properties of single layer and free standing silicene, germanene and stanene. Uniaxial tensile and compressive simulations were carried out to probe and compare stress strain properties; such as the Young modulus, Poisson ratio and ultimate strength. We evaluated the chirality effect on the mechanical response and bond structure of the 2D substrates. Our first principles simulations suggest that in all studied samples application of uniaxial loading can alter the electronic nature of the buckled structures into the metallic character. Our investigation provides a general but also useful viewpoint with respect to the mechanical properties of silicene, germanene and stanene.
△ Less
Submitted 17 March, 2017;
originally announced March 2017.
-
Mechanical responses of borophene sheets: A first-principles study
Authors:
B Mortazavi,
O Rahaman,
A Dianat,
T Rabczuk
Abstract:
Recent experimental advances for the fabrication of various borophene sheets introduced new structures with a wide prospect of applications. Borophene is the boron atoms analogue of graphene. Borophene exhibits various structural polymorphs all of which are metallic. In this work, we employed first-principles density functional theory calculations to investigate the mechanical properties of five d…
▽ More
Recent experimental advances for the fabrication of various borophene sheets introduced new structures with a wide prospect of applications. Borophene is the boron atoms analogue of graphene. Borophene exhibits various structural polymorphs all of which are metallic. In this work, we employed first-principles density functional theory calculations to investigate the mechanical properties of five different single-layer borophene sheets. In particular, we analyzed the effect of loading direction and point vacancy on the mechanical response of borophene. Moreover, we compared the thermal stabilities of the considered borophene systems. Based on the results of our modelling, borophene films depending on the atomic configurations and the loading direction can yield remarkable elastic modulus in the range of 163-382 GPa.nm and high ultimate tensile strength from 13.5 GPa.nm to around 22.8 GPa.nm at the corresponding strain from 0.1 to 0.21. Our study reveals the remarkable mechanical characteristics of borophene films.
△ Less
Submitted 17 March, 2017;
originally announced March 2017.
-
The catalytic potential of high-k dielectrics for graphene formation
Authors:
Andrew Scott,
Arezoo Dianat,
Felix Börrnert,
Alicja Bachmatiuk,
Shasha Zhang,
Jamie H. Warner,
Ewa Borowiak-Palen,
Martin Knupfer,
Bernd Büchner,
Gianaurelio Cuniberti,
Mark H. Rümmeli
Abstract:
The growth of single and multilayer graphene nano-flakes on MgO and ZrO2 at low temperatures is shown through transmission electron microscopy. The graphene nano-flakes are ubiquitously anchored at step edges on MgO (100) surfaces. Density functional theory investigations on MgO (100) indicate C2H2 decomposition and carbon adsorption at step-edges. Hence, both the experimental and theoretical data…
▽ More
The growth of single and multilayer graphene nano-flakes on MgO and ZrO2 at low temperatures is shown through transmission electron microscopy. The graphene nano-flakes are ubiquitously anchored at step edges on MgO (100) surfaces. Density functional theory investigations on MgO (100) indicate C2H2 decomposition and carbon adsorption at step-edges. Hence, both the experimental and theoretical data highlight the importance of step sites for graphene growth on MgO.
△ Less
Submitted 25 February, 2011;
originally announced February 2011.
-
Ab initio study of element segregation and oxygen adsorption on PtPd and CoCr binary alloy surfaces
Authors:
Arezoo Dianat,
Janina Zimmermann,
Nicola Seriani,
Manfred Bobeth,
Wolfgang Pompe,
Lucio Colombi Ciacchi
Abstract:
The segregation behavior of the bimetallic alloys PtPd and CoCr in the case of bare surfaces and in the presence of an oxygen ad-layer has been studied by means of first-principles modeling based on density-functional theory (DFT). For both systems, change of the d-band filling due to charge transfer between the alloy components, resulting in a shift of the d-band center of surface atoms compare…
▽ More
The segregation behavior of the bimetallic alloys PtPd and CoCr in the case of bare surfaces and in the presence of an oxygen ad-layer has been studied by means of first-principles modeling based on density-functional theory (DFT). For both systems, change of the d-band filling due to charge transfer between the alloy components, resulting in a shift of the d-band center of surface atoms compared to the pure components, drives the surface segregation and governs the chemical reactivity of the bimetals. In contrast to previous findings but consistent with analogous PtNi alloy systems, enrichment of Pt atoms in the surface layer and of Pd atoms in the first subsurface layer has been found in Pt-rich PtPd alloy, despite the lower surface energy of pure Pd compared to pure Pt. Similarly, Co surface and Cr subsurface segregation occurs in Co-rich CoCr alloys. However, in the presence of adsorbed oxygen, Pd and Cr occupy preferentially surface sites due to their lower electronegativity and thus stronger oxygen affinity compared to Pt and Co, respectively. In either cases, the calculated oxygen adsorption energies on the alloy surfaces are larger than on the pure components when the more noble components are present in the subsurface layers.
△ Less
Submitted 17 July, 2008;
originally announced July 2008.