Showing 1–50 of 61 results for author: Deibel, C

Transport resistance strikes back: unveiling its impact on fill factor losses in organic solar cells

Authors: Maria Saladina, Carsten Deibel

Abstract: The fill factor ($FF$) is a critical parameter for solar cell efficiency, yet its analytical description is challenging due to the interplay between recombination and charge extraction processes. An often overlooked yet significant factor contributing to $FF$ losses, beyond recombination, is the influence of charge transport. In most state-of-the-art organic solar cells, the primary limitation of… ▽ More The fill factor ($FF$) is a critical parameter for solar cell efficiency, yet its analytical description is challenging due to the interplay between recombination and charge extraction processes. An often overlooked yet significant factor contributing to $FF$ losses, beyond recombination, is the influence of charge transport. In most state-of-the-art organic solar cells, the primary limitation of the $FF$ arises not from recombination but rather from low conductivity, highlighting the need for refined models to predict the $FF$ accurately. Here, we extend the analytical model for transport resistance to a more general case. Drawing from a large set of experimental current-voltage and light intensity-dependent open-circuit voltage data, we systematically incorporate crucial details previously omitted in the model. Consequently, we introduce a straightforward set of equations to predict the $FF$ of a solar cell, enabling the differentiation of losses attributed to recombination and transport resistance. Our study provides valuable insights into strategies for mitigating $FF$ losses based on the experimentally validated analytical model, guiding the development of more efficient solar cell designs and optimization strategies. △ Less

Submitted 9 April, 2024; originally announced April 2024.

Comments: 9 pages, 5 figures

Power-law density of states in organic solar cells revealed by the open-circuit voltage dependence of the ideality factor

Authors: Maria Saladina, Christopher Wöpke, Clemens Göhler, Ivan Ramirez, Olga Gerdes, Chao Liu, Ning Li, Thomas Heumüller, Christoph J. Brabec, Karsten Walzer, Martin Pfeiffer, Carsten Deibel

Abstract: The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage ($V_\mathrm{oc}$) dependence of the ideality factor in organic solar cells. By performing Suns-$V_\mathrm{oc}$ meas… ▽ More The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage ($V_\mathrm{oc}$) dependence of the ideality factor in organic solar cells. By performing Suns-$V_\mathrm{oc}$ measurements, we find that gaussian and exponential distributions describe the DOS only at a given quasi-Fermi level splitting. The DOS width increases linearly with the DOS depth, revealing the power-law DOS in these materials. △ Less

Submitted 20 October, 2022; originally announced October 2022.

Comments: 5 pages, 3 figures

Journal ref: Phys. Rev. Lett. 130, 236403 (2023)

Traps and transport resistance: the next frontier for stable state-of-the-art non-fullerene acceptor solar cells

Authors: Christopher Wöpke, Clemens Göhler, Maria Saladina, Xiaoyan Du, Li Nian, Christopher Greve, Chenhui Zhu, Kaila M. Yallum, Yvonne J. Hofstetter, David Becker-Koch, Ning Li, Thomas Heumüller, Ilya Milekhin, Dietrich R. T. Zahn, Christoph J. Brabec, Natalie Banerji, Yana Vaynzof, Eva M. Herzig, Roderick C. I. MacKenzie, Carsten Deibel

Abstract: Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduct… ▽ More Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduction, the other one is induced thermally and marked by severe losses of open-circuit voltage and fill factor. We focus our investigation on the thermally accelerated degradation. Our findings show that bulk material properties and interfaces remain remarkably stable, however, aging-induced defect state formation in the active layer remains the primary cause of thermal degradation. The increased trap density leads to higher non-radiative recombination, which limits open-circuit voltage and lowers charge carrier mobility in the photoactive layer. Furthermore, we find the trap-induced transport resistance to be the major reason for the drop in fill factor. Our results suggest that device lifetimes could be significantly increased by marginally suppressing trap formation, leading to a bright future for OSC. △ Less

Submitted 22 March, 2022; originally announced March 2022.

Report number: woepke2022nc

Journal ref: Nature Communications 13:3786 (2022)

Charge Photogeneration in Non-Fullerene Organic Solar Cells: Influence of Excess Energy and Electrostatic Interactions

Authors: Maria Saladina, Pablo Simón Marqués, Anastasia Markina, Safakath Karuthedath, Christopher Wöpke, Clemens Göhler, Yue Chen, Magali Allain, Philippe Blanchard, Clément Cabanetos, Denis Andrienko, Frédéric Laquai, Julien Gorenflot, Carsten Deibel

Abstract: In organic solar cells, photogenerated singlet excitons form charge transfer (CT) complexes, which subsequently split into free charge carriers. Here, we consider the contributions of excess energy and molecular quadrupole moments to the charge separation process. We investigate charge photogeneration in two separate bulk heterojunction systems consisting of the polymer donor PTB7-Th and two non-f… ▽ More In organic solar cells, photogenerated singlet excitons form charge transfer (CT) complexes, which subsequently split into free charge carriers. Here, we consider the contributions of excess energy and molecular quadrupole moments to the charge separation process. We investigate charge photogeneration in two separate bulk heterojunction systems consisting of the polymer donor PTB7-Th and two non-fullerene acceptors, ITIC and h-ITIC. CT state dissociation in these donor-acceptor systems is monitored by charge density decay dynamics obtained from transient absorption experiments. We study the electric field dependence of charge carrier generation at different excitation energies by time delayed collection field (TDCF) and sensitive steady-state photocurrent measurements. Upon excitation below the optical gap free charge carrier generation becomes less field dependent with increasing photon energy, which challenges the view of charge photogeneration proceeding through energetically lowest CT states. We determine the average distance between electron-hole pairs at the donor-acceptor interface from empirical fits to the TDCF data. The delocalisation of CT states is larger in PTB7-Th:ITIC, the system with larger molecular quadrupole moment, indicating the sizeable effect of the electrostatic potential at the donor-acceptor interface on the dissociation of CT complexes. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 11 pages, 6 figures

Journal ref: Adv. Funct. Mater. 2021, 31, 2007479

Nongeminate and Geminate Recombination in PTB7:PC$_{71}$BM solar cells

Authors: A. Foertig, J. Kniepert, M. Gluecker, T. Brenner, V. Dyakonov, D. Neher, C. Deibel

Abstract: A combination of transient photovoltage (TPV), voltage dependent charge extraction (CE) and time delayed collection field (TDCF) measurements is applied to poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl] [3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl]] (PTB7):[6,6]-phenyl-C71-butyric acid (PC$_{71}$BM) bulk heterojunction solar cells to analyze the limitat… ▽ More A combination of transient photovoltage (TPV), voltage dependent charge extraction (CE) and time delayed collection field (TDCF) measurements is applied to poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl] [3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]thiophenediyl]] (PTB7):[6,6]-phenyl-C71-butyric acid (PC$_{71}$BM) bulk heterojunction solar cells to analyze the limitations of photovoltaic performance. Devices are processed from pure chlorobenzene (CB) solution and a subset was optimized with 1,8-diiodooctane (DIO) as co-solvent. The dramatic changes in device performance are discussed with respect to the dominating loss processes. While in the devices processed from CB solution, severe geminate and nongeminate recombination is observed, the use of DIO facilitates efficient polaron pair dissociation and minimizes geminate recombination. Thus, from the determined charge carrier decay rate under open circuit conditions and the voltage dependent charge carrier densities $n(V)$, the nongeminate loss current $j_{loss}$ of the samples with DIO alone enables us to reconstruct the current/voltage ($j/V$) characteristics across the whole operational voltage range. Geminate and nongeminate losses are considered to describe the $j/V$ response of cells prepared without additive, but lead to a clearly overestimated device performance. We attribute the deviation between measured and reconstructed $j/V$ characteristics to trapped charges in isolated domains of pure fullerene phases. △ Less

Submitted 18 June, 2021; originally announced June 2021.

Comments: 7 pages, 5 figures

Report number: foertig2013afm

Journal ref: Adv. Funct. Mater. 24:1306 (2014)

Nongeminate Recombination in Planar and Bulk Heterojunction Organic Solar Cells

Authors: A. Foertig, A. Wagenpfahl, T. Gerbich, D. Cheyns, V. Dyakonov, C. Deibel

Abstract: We investigate nongeminate recombination in organic solar cells based on copper phthalocyanine (CuPc) and C$_{60}$. Two device architectures, the planar heterojunction (PHJ) and the bulk heterojunction (BHJ), are directly compared in view of differences in charge carrier decay dynamics. We apply a combination of transient photovoltage (TPV) experiments, yielding the small perturbation charge carri… ▽ More We investigate nongeminate recombination in organic solar cells based on copper phthalocyanine (CuPc) and C$_{60}$. Two device architectures, the planar heterojunction (PHJ) and the bulk heterojunction (BHJ), are directly compared in view of differences in charge carrier decay dynamics. We apply a combination of transient photovoltage (TPV) experiments, yielding the small perturbation charge carrier lifetime, and charge extraction measurements, providing the charge carrier density. In organic solar cells, charge photogeneration and recombination primarily occur at the donor--acceptor heterointerface. Whereas the BHJ can often be approximated by an effective medium due to rather small scale phase separation, the PHJ has a well defined two-dimensional heterointerface. To study recombination dynamics in PHJ devices most relevant is the charge accumulation at this interface. As from extraction techniques only the spatially averaged carrier concentration can be determined, we derive the charge carrier density at the interface $n_{int}$ from the open circuit voltage. Comparing the experimental results with macroscopic device simulation we discuss the differences of recombination and charge carrier densities in CuPc:C$_{60}$ PHJ and BHJ devices with respect to the device performance. The open circuit voltage of BHJ is larger than for PHJ at low light intensities, but at 0.3 sun the situation is reversed: here, the PHJ can finally take advantage of its generally longer charge carrier lifetimes, as the active recombination region is smaller. △ Less

Submitted 18 June, 2021; originally announced June 2021.

Comments: 7 pages, 6 figures

Report number: foertig2012b

Journal ref: Adv. Ener. Mater., 2:1483 (2012)

Open-Circuit Voltage Limitation by Surface Recombination in Perovskite Solar Cells

Authors: Sebastian Reichert, Katelyn Goetz, Christopher Wöpke, Yana Vaynzof, Carsten Deibel

Abstract: Fundamental electronic processes such as charge-carrier transport and recombination play a critical role in determining the efficiency of hybrid perovskite solar cells. The presence of mobile ions complicates the development of a clear understanding of these processes as the ions may introduce exceptional phenomena such as hysteresis or giant dielectric constants. As a result, the electronic lands… ▽ More Fundamental electronic processes such as charge-carrier transport and recombination play a critical role in determining the efficiency of hybrid perovskite solar cells. The presence of mobile ions complicates the development of a clear understanding of these processes as the ions may introduce exceptional phenomena such as hysteresis or giant dielectric constants. As a result, the electronic landscape, including its interaction with mobile ions, is difficult to access both experimentally and analytically. To address this challenge, we applied a series of small perturbation techniques including impedance spectroscopy (IS), intensity-modulated photocurrent spectroscopy (IMPS) and intensity-modulated photovoltage spectroscopy (IMVS) to planar $\mathrm{MAPbI_3}$ perovskite solar cells. Our measurements indicate that both electronic as well as ionic responses can be observed in all three methods and assigned by literature comparison. The results reveal that the dominant charge-carrier loss mechanism is surface recombination by limitation of the quasi-Fermi level splitting. The interaction between mobile ions and the electronic charge carriers leads to a shift of the apparent diode ideality factor from 0.74 to 1.64 for increasing illumination intensity, despite the recombination mechanism remaining unchanged. △ Less

Submitted 16 December, 2020; originally announced December 2020.

Probing the ionic defect landscape in halide perovskite solar cells

Authors: Sebastian Reichert, Qingzhi An, Young-Won Woo, Aron Walsh, Yana Vaynzof, Carsten Deibel

Abstract: Point defects in metal halide perovskites play a critical role in determining their properties and optoelectronic performance; however, many open questions remain unanswered. In this work, we apply impedance spectroscopy and deep-level transient spectroscopy to characterize the ionic defect landscape in methylammonium lead triiodide ($MAPbI_3$) perovskites in which defects were purposely introduce… ▽ More Point defects in metal halide perovskites play a critical role in determining their properties and optoelectronic performance; however, many open questions remain unanswered. In this work, we apply impedance spectroscopy and deep-level transient spectroscopy to characterize the ionic defect landscape in methylammonium lead triiodide ($MAPbI_3$) perovskites in which defects were purposely introduced by fractionally changing the precursor stoichiometry. Our results highlight the profound influence of defects on the electronic landscape, exemplified by their impact on the device built-in potential, and consequently, the open-circuit voltage. Even low ion densities can have an impact on the electronic landscape when both cations and anions are considered as mobile. Moreover, we find that all measured ionic defects fulfil the Meyer--Neldel rule with a characteristic energy connected to the underlying ion hop** process. These findings support a general categorization of defects in halide perovskite compounds. △ Less

Submitted 30 November, 2020; v1 submitted 14 May, 2020; originally announced May 2020.

Journal ref: Nat Commun 11, 6098 (2020)

Pathways towards 30% efficient single-junction perovskite solar cells and the role of mobile ions

Authors: Jonas Diekmann, Pietro Caprioglio, Moritz H. Futscher, Vincent M. Le Corre, Sebastian Reichert, Frank Jaiser, Malavika Arvind, Lorena Perdigon Toro, Emilio Gutierrez-Partida, Francisco Pena-Camargo, Carsten Deibel, Bruno Ehrler, Thomas Unold, Thomas Kirchartz, Dieter Neher, Martin Stolterfoht

Abstract: Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different… ▽ More Perovskite semiconductors have demonstrated outstanding external luminescence quantum yields, enabling high power conversion efficiencies (PCE). However, the precise conditions to advance to an efficiency regime above monocrystalline silicon cells are not well understood. Here, we establish a simulation model that well describes efficient p-i-n type perovskite solar cells and a range of different experiments. We then study important device and material parameters and we find that an efficiency regime of 30% can be unlocked by optimizing the built-in potential across the perovskite layer by using either highly doped (10^19 cm-3), thick transport layers (TLs) or ultrathin undoped TLs, e.g. self-assembled monolayers. Importantly, we only consider parameters that have been already demonstrated in recent literature, that is a bulk lifetime of 10 us, interfacial recombination velocities of 10 cm/s, a perovskite bandgap of 1.5 eV and an EQE of 95%. A maximum efficiency of 31% is predicted for a bandgap of 1.4 eV. Finally, we demonstrate that the relatively high mobile ion density does not represent a significant barrier to reach this efficiency regime. Thus, the results of this paper promise continuous PCE improvements until perovskites may become the most efficient single-junction solar cell technology in the near future. △ Less

Submitted 25 April, 2021; v1 submitted 16 October, 2019; originally announced October 2019.

Improved evaluation of deep-level transient spectroscopy on perovskite solar cells reveals ionic defect distribution

Authors: Sebastian Reichert, Jens Flemming, Qingzhi An, Yana Vaynzof, Jan-Frederik Pietschmann, Carsten Deibel

Abstract: One of the key challenges for future development of efficient and stable metal halide perovskite solar cells is related to the migration of ions in these materials. Mobile ions have been linked to the observation of hysteresis in the current--voltage characteristics, shown to reduce device stability against degradation and act as recombination centers within the band gap of the active layer. In th… ▽ More One of the key challenges for future development of efficient and stable metal halide perovskite solar cells is related to the migration of ions in these materials. Mobile ions have been linked to the observation of hysteresis in the current--voltage characteristics, shown to reduce device stability against degradation and act as recombination centers within the band gap of the active layer. In the literature one finds a broad spread of reported ionic defect parameters (e.g. activation energies) for seemingly similar perovskite materials, rendering the identification of the nature of these species difficult. In this work, we performed temperature dependent deep-level transient spectroscopy (DLTS) measurements on methylammonium lead iodide perovskite solar cells and developed a extended regularization algorithm for inverting the Laplace transform. Our results indicate that mobile ions form a distribution of emission rates (i.e. a distribution of diffusion constants) for each observed ionic species, which may be responsible for the differences in the previously reported defect parameters. Importantly, different DLTS modes such as optical and current DLTS yield the same defect distributions. Finally the comparison of our results with conventional boxcar DLTS and impedance spectroscopy (IS) verifies our evaluation algorithm. △ Less

Submitted 21 January, 2020; v1 submitted 10 October, 2019; originally announced October 2019.

Journal ref: Phys. Rev. Applied 13, 034018 (2020)

Homocoupling defects in a conjugated polymer limit exciton diffusion

Authors: Martin Streiter, Daniel Beer, Fabian Meier, Clemens Göhler, Caroline Lienert, Florian Lombeck, Michael Sommer, Carsten Deibel

Abstract: Copolymers such as PCDTBT (poly(N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl- 2',1',3'-benzothiadiazole))) are commonly employed as donor material in bulk heterojunction solar cells. Recently, chemical defects such as homocouplings have been shown to form at the material synthesis stage, strongly reducing the short circuit current in organic photovoltaics. Here we show that both, lo… ▽ More Copolymers such as PCDTBT (poly(N-9'-heptadecanyl-2,7-carbazole-alt-5,5-(4',7'-di-2-thienyl- 2',1',3'-benzothiadiazole))) are commonly employed as donor material in bulk heterojunction solar cells. Recently, chemical defects such as homocouplings have been shown to form at the material synthesis stage, strongly reducing the short circuit current in organic photovoltaics. Here we show that both, low molecular weight and homocoupling defects reduce the short circuit current of solar cells because of limited exciton diffusion. We propose a model that unites and explains the influence of both chemical parameters with the distribution of conjugation lengths. The connection between limited exciton diffusion and short circuit current is revealed by kinetic Monte Carlo simulation of bulk heterojunctions. Our findings are likely applicable for copolymers in general. △ Less

Submitted 16 May, 2019; v1 submitted 10 December, 2018; originally announced December 2018.

Report number: streiter2019afm

Journal ref: Adv. Funct. Mater. 1903936 (2019)

Charge Carrier Concentration Dependence of Encounter-Limited Bimolecular Recombination in Phase-Separated Organic Semiconductor Blends

Authors: Michael C. Heiber, Thuc-Quyen Nguyen, Carsten Deibel

Abstract: Understanding how the complex intermolecular- and nano-structure present in organic semiconductor donor-acceptor blends impacts charge carrier motion, interactions, and recombination behavior is a critical fundamental issue with a particularly major impact on organic photovoltaic applications. In this study, kinetic Monte Carlo (KMC) simulations are used to numerically quantify the complex bimolec… ▽ More Understanding how the complex intermolecular- and nano-structure present in organic semiconductor donor-acceptor blends impacts charge carrier motion, interactions, and recombination behavior is a critical fundamental issue with a particularly major impact on organic photovoltaic applications. In this study, kinetic Monte Carlo (KMC) simulations are used to numerically quantify the complex bimolecular charge carrier recombination behavior in idealized phase-separated blends. Recent KMC simulations have identified how the encounter-limited bimolecular recombination rate in these blends deviates from the often used Langevin model and have been used to construct the new power mean mobility model. Here, we make a challenging but crucial expansion to this work by determining the charge carrier concentration dependence of the encounter-limited bimolecular recombination coefficient. In doing so, we find that an accurate treatment of the long-range electrostatic interactions between charge carriers is critical, and we further argue that many previous KMC simulation studies have used a Coulomb cutoff radius that is too small, which causes a significant overestimation of the recombination rate. To shed more light on this issue, we determine the minimum cutoff radius required to reach an accuracy of less than $\pm10\%$ as a function of the domain size and the charge carrier concentration and then use this knowledge to accurately quantify the charge carrier concentration dependence of the recombination rate. Using these rigorous methods, we finally show that the parameters of the power mean mobility model are determined by a newly identified dimensionless ratio of the domain size to the average charge carrier separation distance. △ Less

Submitted 11 May, 2016; originally announced May 2016.

Comments: Main article: 9 pages, 5 figures, Supplementary Information: 3 pages, 1 figure

Journal ref: Phys. Rev. B 93, 205204 (2016)

Encounter-Limited Charge Carrier Recombination in Phase Separated Organic Semiconductor Blends

Authors: Michael C. Heiber, Christoph Baumbach, Vladimir Dyakonov, Carsten Deibel

Abstract: The theoretical effects of phase separation on encounter-limited charge carrier recombination in organic semiconductor blends are investigated using kinetic Monte Carlo (KMC) simulations of pump-probe experiments. Using model bulk heterojunction morphologies, the dependence of the recombination rate on domain size and charge carrier mobility are quantified. Unifying competing models and simulation… ▽ More The theoretical effects of phase separation on encounter-limited charge carrier recombination in organic semiconductor blends are investigated using kinetic Monte Carlo (KMC) simulations of pump-probe experiments. Using model bulk heterojunction morphologies, the dependence of the recombination rate on domain size and charge carrier mobility are quantified. Unifying competing models and simulation results, we show that the mobility dependence of the recombination rate can be described using the power mean of the electron and hole mobilities with a domain size dependent exponent. Additionally, for domain sizes typical of organic photovoltaic devices, we find that phase separation reduces the recombination rate by less than one order of magnitude compared to the Langevin model and that the mobility dependence can be approximated by the geometric mean. △ Less

Submitted 10 March, 2015; originally announced March 2015.

Comments: Main article: 6 pages, 4 figures, Supplementary Information: 3 pages, 1 figure

Journal ref: Phys. Rev. Lett. 114, 136602 (2015)

Nongeminate recombination in neat P3HT and P3HT:PCBM blend films

Authors: Julien Gorenflot, Michael C. Heiber, Andreas Baumann, Jens Lorrmann, Matthias Gunz, Andreas Kämpgen, Vladimir Dyakonov, Carsten Deibel

Abstract: The slow decay of charge carriers in polymer-fullerene blends measured in transient studies has raised a number of questions about the mechanisms of nongeminate recombination in these systems. In an attempt to understand this behavior, we have applied a combination of steady-state and transient photoinduced absorption measurements to compare nongeminate recombination behavior in films of neat poly… ▽ More The slow decay of charge carriers in polymer-fullerene blends measured in transient studies has raised a number of questions about the mechanisms of nongeminate recombination in these systems. In an attempt to understand this behavior, we have applied a combination of steady-state and transient photoinduced absorption measurements to compare nongeminate recombination behavior in films of neat poly(3-hexyl thiophene) (P3HT) and P3HT blended with [6,6]-phenyl-C61 butyric acid methyl ester (PCBM). Transient measurements show that carrier recombination in the neat P3HT film exhibits second-order decay with a recombination rate coefficient that is similar to that predicted by Langevin theory. In addition, temperature dependent measurements indicate that neat films exhibit recombination behavior consistent with the Gaussian disorder model. In contrast, the P3HT:PCBM blend films are characterized by a strongly reduced recombination rate and an apparent recombination order greater than two. We then assess a number of previously proposed explanations for this behavior, including phase separation, carrier concentration dependent mobility, non-encounter limited recombination, and interfacial states. In the end, we propose a model in which pure domains with a Gaussian density of states are separated by a mixed phase with an exponential density of states. We find that such a model can explain both the reduced magnitude of the recombination rate and the high order recombination kinetics and, based on the current state of knowledge, is the most consistent with experimental observations. △ Less

Submitted 7 April, 2014; v1 submitted 28 March, 2014; originally announced March 2014.

Comments: 9 pages, 4 figures; corrected a few minor typos and grammatical errors

Journal ref: J. Appl. Phys. 115, 144502 (2014)

Effects of Characteristic Length Scales on the Exciton Dynamics in Rubrene Single Crystals

Authors: Björn Gieseking, Teresa Schmeiler, Benjamin Müller, Carsten Deibel, Bernd Engels, Vladimir Dyakonov, Jens Pflaum

Abstract: As for its inorganic counterparts the future developments in organic electronics are driven by an advanced device miniaturization. Therefore, the opto-electronic behavior of up-to-date devices is progressively governed by the local structural environment. However, there is a lack of organic semiconductor materials providing access to the fundamental structure-functionality relation, either due to… ▽ More As for its inorganic counterparts the future developments in organic electronics are driven by an advanced device miniaturization. Therefore, the opto-electronic behavior of up-to-date devices is progressively governed by the local structural environment. However, there is a lack of organic semiconductor materials providing access to the fundamental structure-functionality relation, either due to limitations by their inherent growth or their optical characteristics. In this work we present a systematic investigation of the optical states, so-called excitons, and their temporal evolution in the prototypical organic semiconductor rubrene by means of time and temperature dependent photoluminescence studies. This material offers the unique possibility of preparing well-defined morphologies with adjustable degree of confinement. By this approach we are able to confirm the direct influence on the temperature dependent optical processes with picosecond resolution already for a spatial localization of excitation on the μm length scale. While in bulk single crystals the exciton decay dynamics are governed by thermally activated singlet fission, excitons created in microcrystals are trapped by dark states localized on the surface and leading to a pronounced enhancement of their average lifetime. Our results highlight the impact of the local environment on the excitonic states and their dynamics in organic semiconductors. With respect to the spatial dimensions of organic thin film devices, this correlation and the reported effects emerging by the confinement have to be considered upon further miniaturization and in the development of innovative device concepts, such as photovoltaic cells based on triplet-harvesting. △ Less

Submitted 4 September, 2013; originally announced September 2013.

Comments: 12 pages, 3 figures, 1 table, supplementary: 6 pages, 4 figues

Journal ref: Phys. Rev. B 90, 205305 (2014)

Order of Decay of Mobile Charge Carriers in P3HT:PCBM Solar Cells

Authors: Carsten Deibel, Daniel Rauh, Alexander Foertig

Abstract: The charge carrier dynamics of organic solar cells are strongly influenced by trap** and allow to draw conclusions on the loss mechanisms limiting the photovoltaic performance. In this study we derive the recombination order Δ of mobile charge carriers. For annealed P3HT:PCBM solar cells, it allows us to pinpoint the dominant recombination of mobile with trapped charge carriers in tail states. W… ▽ More The charge carrier dynamics of organic solar cells are strongly influenced by trap** and allow to draw conclusions on the loss mechanisms limiting the photovoltaic performance. In this study we derive the recombination order Δ of mobile charge carriers. For annealed P3HT:PCBM solar cells, it allows us to pinpoint the dominant recombination of mobile with trapped charge carriers in tail states. While the characteristic tail state energy of about 40 meV rises to about 100 meV for 30 h oxygen exposure under illumination, Δ decreases only weakly from 1.70 to 1.62: This corresponds to a slight shift towards trap-assisted recombination. △ Less

Submitted 10 July, 2013; v1 submitted 2 February, 2013; originally announced February 2013.

Comments: 4 pages, 3 figures. Corrected one reference and one technical term

Report number: deibel2013

Journal ref: Appl. Phys. Lett. 103, 043307 (2013)

Distribution of charge carrier transport properties in organic semiconductors with Gaussian disorder

Authors: Jens Lorrmann, Manuel Ruf, David Vocke, Vladimir Dyakonov, Carsten Deibel

Abstract: The charge carrier drift mobility in disordered semiconductors is commonly graphically extracted from time-of-flight (ToF) photocurrent transients yielding a single transit time. However, the term transit time is ambiguously defined and fails to deliver a mobility in terms of a statistical average. Here, we introduce an advanced computational procedure to evaluate ToF transients, which allows to e… ▽ More The charge carrier drift mobility in disordered semiconductors is commonly graphically extracted from time-of-flight (ToF) photocurrent transients yielding a single transit time. However, the term transit time is ambiguously defined and fails to deliver a mobility in terms of a statistical average. Here, we introduce an advanced computational procedure to evaluate ToF transients, which allows to extract the whole distribution of transit times and mobilities from the photocurrent transient, instead of a single value. This method, extending the work of Scott et al. (Phys. Rev. B 46, 8603), is applicable to disordered systems with a Gaussian density of states (DOS) and its accuracy is validated using one-dimensional Monte Carlo simulations. We demonstrate the superiority of this new approach by comparing it to the common geometrical analysis of hole ToF transients measured on poly(3-hexyl thiophene-2,5-diyl) (P3HT). The extracted distributions provide access to a very detailed and accurate analysis of the charge carrier transport. For instance, not only the mobility given by the mean transit time, but also the mean mobility can be calculated. Whereas the latter determines the macroscopic photocurrent, the former is relevant for an accurate determination of the energetic disorder parameter $σ$ within the Gaussian disorder model (GDM). $σ$ derived by using the common geometrical method is, as we show, underestimated instead. △ Less

Submitted 30 April, 2014; v1 submitted 10 September, 2012; originally announced September 2012.

Comments: 10 pages, 6 figures

Journal ref: J. Appl. Phys. 115, 183702 (2014)

Impact of nongeminate recombination on the performance of pristine and annealed P3HT:PCBM solar cells

Authors: Markus Gluecker, Alexander Foertig, Vladimir Dyakonov, Carsten Deibel

Abstract: Transient photovoltage (TPV) and voltage dependent charge extraction (CE) measurements were applied to poly(3-hexylthiophene)(P3HT):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) bulk heterojunction solar cells to analyze the limitations of solar cell performance in pristine and annealed devices. From the determined charge carrier decay rate under open circuit conditions and the voltage depende… ▽ More Transient photovoltage (TPV) and voltage dependent charge extraction (CE) measurements were applied to poly(3-hexylthiophene)(P3HT):[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) bulk heterojunction solar cells to analyze the limitations of solar cell performance in pristine and annealed devices. From the determined charge carrier decay rate under open circuit conditions and the voltage dependent charge carrier densities n(V) the nongeminate loss current jloss of the device is accessible. We found that jloss alone is sufficient to describe the j-V characteristics across the whole operational range, for annealed and, not yet shown before, also for the lower performing pristine solar cells. Even in a temperature range from 300 K to 200 K nongeminate recombination is found to be the dominant and, therefore, performance limiting loss process. Consequently, charge photogeneration is voltage independent in the voltage range studied. △ Less

Submitted 18 July, 2012; v1 submitted 14 July, 2012; originally announced July 2012.

Comments: 3 pages, 3 figures; Rapid Research Letter 2012

Report number: gluecker2012

Journal ref: Phys. Status Solidi (RRL) 6, 337 (2012)

Shockley Equation Parameters of Organic Solar Cells derived by Transient Techniques

Authors: A. Foertig, J. Rauh, V. Dyakonov, C. Deibel

Abstract: The Shockley equation (SE), originally derived to describe a p--n junction, was frequently used in the past to simulate current--voltage (j/V) characteristics of organic solar cells (OSC). In order to gain a more detailed understanding of recombination losses, we determined the SE parameters, i.e. the ideality factor and the dark saturation current, from temperature dependent static j/V-measuremen… ▽ More The Shockley equation (SE), originally derived to describe a p--n junction, was frequently used in the past to simulate current--voltage (j/V) characteristics of organic solar cells (OSC). In order to gain a more detailed understanding of recombination losses, we determined the SE parameters, i.e. the ideality factor and the dark saturation current, from temperature dependent static j/V-measurements on poly(3-hexylthiophene-2,5-diyl)(P3HT):[6,6]-phenyl-C$_{61}$ butyric acid methyl ester (PCBM) bulk heterojunction solar cells. As we show here, these parameters are directly related to charge carrier recombination and become also accessible by transient photovoltage and photocurrent methods in the case of field-independent charge carrier generation. Although determined in very different ways, both SE parameters were found to be identical. The good agreement of static and transient approaches over a wide temperature range demonstrates the validity of the Shockley model for OSC based on material systems satisfying the requirement of field-independent polaron-pair dissociation. In particular, we were able to reproduce the photocurrent at various light intensities and temperatures from the respective nongeminate recombination rates. Furthermore, the temperature dependence of the dark saturation current $j_0$ allowed determining the effective band gap of the photoactive blend perfectly agreeing with the literature values of the energy onset of the photocurrent due to charge transfer absorption. We also present a consistent model directly relating the ideality factor to recombination of free with trapped charge carriers in an exponential density of tail states. We verify this finding by data from thermally stimulated current measurements. △ Less

Submitted 22 August, 2012; v1 submitted 13 July, 2012; originally announced July 2012.

Comments: 8 pages, 6 figures

Report number: foertig2012

Journal ref: Phys. Rev. B 86, 115302 (2012)

Excitation Dynamics in Low Band Gap Donor-Acceptor Copolymers and Blends

Authors: Björn Gieseking, Berthold Jäck, Eduard Preis, Stefan Jung, Michael Forster, Ullrich Scherf, Carsten Deibel, Vladimir Dyakonov

Abstract: Donor-acceptor (D-A) type copolymers show great potential for the application in the active layer of organic solar cells. Nevertheless the nature of the excited states, the coupling mechanism and the relaxation pathways following photoexcitation are yet to be clarified. We carried out comparative measurements of the steady state absorption and photoluminescence (PL) on the copolymer poly[N-(1-octy… ▽ More Donor-acceptor (D-A) type copolymers show great potential for the application in the active layer of organic solar cells. Nevertheless the nature of the excited states, the coupling mechanism and the relaxation pathways following photoexcitation are yet to be clarified. We carried out comparative measurements of the steady state absorption and photoluminescence (PL) on the copolymer poly[N-(1-octylnonyl)-2,7-carbazole] -alt-5,5-[4',7' -di(thien-2-yl)-2',1',3' -benzothiadiazole] (PCDTBT), its building blocks as well as on the newly synthesized N-(1-octylnonyl)-2,7-bis-[(5-phenyl)thien-2-yl)carbazole (BPT-carbazole) (see Figure 1). The high-energy absorption band (HEB) of PCDTBT was identified with absorption of carbazoles with adjacent thiophene rings while the low-energy band (LEB) originates instead from the charge transfer (CT) state delocalized over the aforementioned unit with adjacent benzothiadiazole group. Photoexcitation of the HEB is followed by internal relaxation prior the radiative decay to the ground state. Adding PC70BM results in the efficient PL quenching within the first 50 ps after excitation. From the PL excitation experiments no evidence for a direct electron transfer from the HEB of PCDTBT towards the fullerene acceptor was found, therefore the internal relaxation mechanisms within PCDTBT can be assumed to precede. Our findings indicate that effective coupling between copolymer building blocks governs the photovoltaic performance of the blends. △ Less

Submitted 20 June, 2012; originally announced June 2012.

Comments: 7 pages, 6 figures, 1 table

Report number: gieseking2012

Journal ref: Adv. Ener. Mater. 2, 1477 (2012)

Investigation of electronic trap states in organic photovoltaic materials by current-based deep level transient spectroscopy

Authors: Stefan Neugebauer, Julia Rauh, Carsten Deibel, Vladimir Dyakonov

Abstract: Current-based deep level transient spectroscopy was used to study trap states in poly(3- hexylthiophene-2,5-diyl) (P3HT), [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) and P3HT:PCBM blend. The obtained spectra showed traps of 87 meV activation energy in pure P3HT and 21 meV for PCBM. The blend shows a complex emission rate spectrum consisting of several different emission rate bands in the ran… ▽ More Current-based deep level transient spectroscopy was used to study trap states in poly(3- hexylthiophene-2,5-diyl) (P3HT), [6,6]-phenyl-C61 butyric acid methyl ester (PCBM) and P3HT:PCBM blend. The obtained spectra showed traps of 87 meV activation energy in pure P3HT and 21 meV for PCBM. The blend shows a complex emission rate spectrum consisting of several different emission rate bands in the range of (0.1-30) s^-1, yielding activation energies between about 30 meV and 160 meV. △ Less

Submitted 13 June, 2012; originally announced June 2012.

Comments: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 100, 263304 (2012)

Direct and charge transfer mediated photogeneration in polymer-fullerene bulk heterojunction solar cells

Authors: Markus Mingebach, Stefan Walter, Vladimir Dyakonov, Carsten Deibel

Abstract: We investigated photogeneration yield and recombination dynamics in blends of poly(3-hexyl thiophene) (P3HT) and poly[2-methoxy-5-(30,70-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) with [6,6]- phenyl-C61 butyric acid methyl ester (PC61BM) by means of temperature dependent time delayed collection field (TDCF) measurements. In MDMO-PPV:PC61BM we find a strongly field dependent polaron pair d… ▽ More We investigated photogeneration yield and recombination dynamics in blends of poly(3-hexyl thiophene) (P3HT) and poly[2-methoxy-5-(30,70-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) with [6,6]- phenyl-C61 butyric acid methyl ester (PC61BM) by means of temperature dependent time delayed collection field (TDCF) measurements. In MDMO-PPV:PC61BM we find a strongly field dependent polaron pair dissociation which can be attributed to geminate recombination in the device. Our findings are in good agreement with field dependent photoluminescence measurements published before, supporting a scenario of polaron pair dissociation via an intermediate charge transfer (CT) state. In contrast, polaron pair dissociation in P3HT:PC61BM shows only a very weak field dependence, indicating an almost field independent polaron pair dissociation or a direct photogeneration. Furthermore, we found Langevin recombination for MDMO-PPV:PC61BM and strongly reduced Langevin recombination for P3HT:PC61BM. △ Less

Submitted 21 April, 2012; originally announced April 2012.

Comments: 4 pages, 3 figures

Journal ref: Appl. Phys. Lett. 100, 193302 (2012)

Charge density dependent nongeminate recombination in organic bulk heterojunction solar cells

Authors: D. Rauh, C. Deibel, V. Dyakonov

Abstract: Apparent recombination orders exceeding the value of two expected for bimolecular recombination have been reported for organic solar cells in various publications. Two prominent explanations are bimolecular losses with a carrier concentration dependent prefactor due to a trap** limited mobility, and protection of trapped charge carriers from recombination by a donor--acceptor phase separation un… ▽ More Apparent recombination orders exceeding the value of two expected for bimolecular recombination have been reported for organic solar cells in various publications. Two prominent explanations are bimolecular losses with a carrier concentration dependent prefactor due to a trap** limited mobility, and protection of trapped charge carriers from recombination by a donor--acceptor phase separation until reemission from these deep states. In order to clarify which mechanism is dominant we performed temperature and illumination dependent charge extraction measurements under open circuit as well as short circuit conditions at poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C$_{61}$butyric acid methyl ester (P3HT:PC$_{61}$BM) and PTB7:PC$_{71}$BM (Poly[[4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl][3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl]]) solar cells in combination with current--voltage characteristics. We show that the charge carrier density $n$ dependence of the mobility $μ$ and the recombination prefactor are different for PC$_{61}$BM at temperatures below 300K and PTB7:PC$_{71}$BM at room temperature. Therefore, in addition to $μ(n)$ a detrap** limited recombination in systems with at least partial donor--acceptor phase separation is required to explain the high recombination orders. △ Less

Submitted 27 March, 2012; originally announced March 2012.

Comments: 7 pages, 4 figures

Report number: rauh2012

Journal ref: Adv. Funct. Mater. 22, 3371 (2012)

Binding energy of singlet excitons and charge transfer complexes in MDMO-PPV:PCBM solar cells

Authors: Julia Kern, Sebastian Schwab, Carsten Deibel, Vladimir Dyakonov

Abstract: The influence of an external electric field on the photoluminescence intensity of singlet excitons and charge transfer complexes is investigated for a poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) diode and a bulk heterojunction of the PPV in combination with [6,6]-phenyl-C61 butyric acid methylester (PCBM), respectively. The experimental data is related to the dissoc… ▽ More The influence of an external electric field on the photoluminescence intensity of singlet excitons and charge transfer complexes is investigated for a poly[2-methoxy-5-(3',7'-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) diode and a bulk heterojunction of the PPV in combination with [6,6]-phenyl-C61 butyric acid methylester (PCBM), respectively. The experimental data is related to the dissociation probability derived from the Onsager-Braun model. In this way, a lower limit for the singlet exciton binding energy of MDMO-PPV is determined as (327 +- 30) meV, whereas a significantly lower value of (203 +- 18) meV is extracted for the charge transfer complex in a MDMO-PPV:PCBM blend. △ Less

Submitted 12 October, 2011; originally announced October 2011.

Comments: 3 pages, 4 figures, published online at physica status solidi (RRL)

Journal ref: Phys. Status Solidi (RRL) Volume 5, Issue 10-11, pages 364-366, November 2011

Spin Signatures of Photogenerated Radical Anions in Polymer-[70]Fullerene Bulk Heterojunctions: High Frequency Pulsed EPR Spectroscopy

Authors: Oleg G. Poluektov, Salvatore Filippone, Nazario Martin, Andreas Sperlich, Carsten Deibel, Vladimir Dyakonov

Abstract: Charged polarons in thin films of polymer-fullerene composites are investigated by light-induced electron paramagnetic resonance (EPR) at 9.5 GHz (X-band) and 130 GHz (D-band). The materials studied were poly(3-hexylthiophene) (PHT), [6,6]-phenyl-C61-butyric acid methyl ester (C60-PCBM), and two different soluble C70-derivates: C70-PCBM and diphenylmethano[70]fullerene oligoether (C70-DPM-OE). The… ▽ More Charged polarons in thin films of polymer-fullerene composites are investigated by light-induced electron paramagnetic resonance (EPR) at 9.5 GHz (X-band) and 130 GHz (D-band). The materials studied were poly(3-hexylthiophene) (PHT), [6,6]-phenyl-C61-butyric acid methyl ester (C60-PCBM), and two different soluble C70-derivates: C70-PCBM and diphenylmethano[70]fullerene oligoether (C70-DPM-OE). The first experimental identification of the negative polaron localized on the C70-cage in polymer-fullerene bulk heterojunctions has been obtained. When recorded at conventional X-band EPR, this signal is overlap** with the signal of the positive polaron, which does not allow for its direct experimental identification. Owing to the superior spectral resolution of the high frequency D-band EPR, we were able to separate light-induced signals from P+ and P- in PHT-C70 bulk heterojunctions. Comparing signals from C70-derivatives with different side-chains, we have obtained experimental proof that the polaron is localized on the cage of the C70 molecule. △ Less

Submitted 7 October, 2011; originally announced October 2011.

Journal ref: J. Phys. Chem. B, 2010, 114, 14426

Reversible and Irreversible Interactions of Poly(3-hexylthiophene) with Oxygen Studied by Spin-Sensitive Methods

Authors: Andreas Sperlich, Hannes Kraus, Carsten Deibel, Hubert Blok, Jan Schmidt, Vladimir Dyakonov

Abstract: Understanding of degradation mechanisms in polymer:fullerene bulk-heterojunctions on the microscopic level aimed at improving their intrinsic stability is crucial for the breakthrough of organic photovoltaics. These materials are vulnerable to exposure to light and/or oxygen, hence they involve electronic excitations. To unambiguously probe the excited states of various multiplicities and their re… ▽ More Understanding of degradation mechanisms in polymer:fullerene bulk-heterojunctions on the microscopic level aimed at improving their intrinsic stability is crucial for the breakthrough of organic photovoltaics. These materials are vulnerable to exposure to light and/or oxygen, hence they involve electronic excitations. To unambiguously probe the excited states of various multiplicities and their reactions with oxygen, we applied combined magneto-optical methods based on multifrequency (9 and 275 GHz) electron paramagnetic resonance (EPR), photoluminescence (PL), and PL-detected magnetic resonance (PLDMR) to the conjugated polymer poly(3-hexylthiophene) (P3HT) and polymer:fullerene bulk heterojunctions (P3HT:PCBM; PCBM = [6,6]-phenyl-C61-butyric acid methyl ester). We identified two distinct photochemical reaction routes, one being fully reversible and related to the formation of polymer:oxygen charge transfer complexes, the other one, irreversible, being related to the formation of singlet oxygen under participation of bound triplet excitons on the polymer chain. With respect to the blends, we discuss the protective effect of the methanofullerenes on the conjugated polymer bypassing the triplet exciton generation. △ Less

Submitted 30 December, 2011; v1 submitted 6 October, 2011; originally announced October 2011.

Journal ref: J. Phys. Chem. B 2011, 115, 13513-13518

Detailed study of N,N'-(diisopropylphenyl)- terrylene-3,4:11,12-bis(dicarboximide) as electron acceptor for solar cells application

Authors: Julien Gorenflot, Andreas Sperlich, Andreas Baumann, Daniel Rauh, Aleksey Vasilev, Chen Li, Martin Baumgarten, Carsten Deibel, Vladimir Dyakonov

Abstract: We report on terrylene-3,4:11,12-bis(dicarboximide) (TDI) as electron acceptor for bulk-heterojunction solar cells using poly(3-hexyl thiophene) (P3HT) as complementary donor component. Enhanced absorption was observed in the blend compared to pure P3HT. As shown by the very efficient photoluminescence (PL) quenching, the generated excitons are collected at the interface between the donor and acce… ▽ More We report on terrylene-3,4:11,12-bis(dicarboximide) (TDI) as electron acceptor for bulk-heterojunction solar cells using poly(3-hexyl thiophene) (P3HT) as complementary donor component. Enhanced absorption was observed in the blend compared to pure P3HT. As shown by the very efficient photoluminescence (PL) quenching, the generated excitons are collected at the interface between the donor and acceptor, where they separate into charges which we detect by photoinduced absorption and electron-spin resonance (ESR). Time-of-flight (TOF) photoconductivity measurements reveal a good electron mobility of 10-3 cm2 V-1 s-1 in the blend. Nevertheless, the photocurrent in solar cells was found to be surprisingly low. Supported by the external quantum efficiency (EQE) spectrum as well as morphological studies by way of X-ray diffraction and atomic force microscopy, we explain our observation by the formation of a TDI hole blocking layer at the anode interface which prevents the efficiently generated charges to be extracted. △ Less

Submitted 4 October, 2011; originally announced October 2011.

Comments: Original research article, 9 pages, 10 figures, 1 table

Journal ref: Synth. Metals 162, 2669 (2012)

Relation of open circuit voltage to charge carrier density in organic bulk heterojunction solar cells

Authors: Daniel Rauh, Alexander Wagenpfahl, Carsten Deibel, Vladimir Dyakonov

Abstract: The open circuit voltage Voc and the corresponding charge carrier density were measured in dependence of temperature and illumination intensity by current-voltage and charge extraction measurements for P3HT:PCBM and P3HT:bisPCBM solar cells. At lower temperatures a saturation of Voc was observed which can be explained by energetic barriers at the contacts (metal-insulator-metal model). Such inject… ▽ More The open circuit voltage Voc and the corresponding charge carrier density were measured in dependence of temperature and illumination intensity by current-voltage and charge extraction measurements for P3HT:PCBM and P3HT:bisPCBM solar cells. At lower temperatures a saturation of Voc was observed which can be explained by energetic barriers at the contacts (metal-insulator-metal model). Such injection barriers can also influence Voc at room temperature and limit the performance of the working solar cell, as was assured by macroscopic device simulations on temperature-dependent IV characteristics. However, under most conditions - room temperature and low barriers - Voc is given by the effective bandgap. △ Less

Submitted 4 October, 2011; originally announced October 2011.

Comments: 4 pages, 2 figures

Journal ref: Appl. Phys. Lett. 98:133301 (2011)

Built-in potential and validity of Mott--Schottky analysis in organic bulk heterojunction solar cells

Authors: Markus Mingebach, Carsten Deibel, Vladimir Dyakonov

Abstract: We investigated poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C61 butyric acid methyl ester bulk heterojunction (BHJ) solar cells by means of pulsed photocurrent, temperature dependent current-voltage and capacitance-voltage measurements. We show that a direct transfer of Mott-Schottky (MS) analysis from inorganic devices to organic BHJ solar cells is not generally appropriate to determine the buil… ▽ More We investigated poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C61 butyric acid methyl ester bulk heterojunction (BHJ) solar cells by means of pulsed photocurrent, temperature dependent current-voltage and capacitance-voltage measurements. We show that a direct transfer of Mott-Schottky (MS) analysis from inorganic devices to organic BHJ solar cells is not generally appropriate to determine the built-in potential, since the resulting potential depends on the active layer thickness. Pulsed photocurrent measurements enabled us to directly study the case of quasi flat bands (QFB) in the bulk of the solar cell. It is well below the built-in potential and differs by diffusion-induced band-bending at the contacts. In contrast to MS analysis the corresponding potential is independent on the active layer thickness and therefore a better measure for flat band conditions in the bulk of a BHJ solar cell as compared to MS analysis. △ Less

Submitted 26 September, 2011; originally announced September 2011.

Comments: 4 pages, 5 figures

Report number: mingebach2011

Journal ref: Phys. Rev. B 84, 153201 (2011)

Triplet Exciton Generation in Bulk-Heterojunction Solar Cells based on Endohedral Fullerenes

Authors: Moritz Liedtke, Andreas Sperlich, Hannes Kraus, Andreas Baumann, Carsten Deibel, Maarten J. M. Wirix, Joachim Loos, Claudia M. Cardona, Vladimir Dyakonov

Abstract: Organic bulk-heterojunctions (BHJ) and solar cells containing the trimetallic nitride endohedral fullerene 1-[3-(2-ethyl)hexoxy carbonyl]propyl-1-phenyl-Lu3N@C80 (Lu3N@C80-PCBEH) show an open circuit voltage (VOC) 0.3 V higher than similar devices with [6,6]-phenyl-C[61]-butyric acid methyl ester (PC61BM). To fully exploit the potential of this acceptor molecule with respect to the power conversio… ▽ More Organic bulk-heterojunctions (BHJ) and solar cells containing the trimetallic nitride endohedral fullerene 1-[3-(2-ethyl)hexoxy carbonyl]propyl-1-phenyl-Lu3N@C80 (Lu3N@C80-PCBEH) show an open circuit voltage (VOC) 0.3 V higher than similar devices with [6,6]-phenyl-C[61]-butyric acid methyl ester (PC61BM). To fully exploit the potential of this acceptor molecule with respect to the power conversion efficiency (PCE) of solar cells, the short circuit current (JSC) should be improved to become competitive with the state of the art solar cells. Here, we address factors influencing the JSC in blends containing the high voltage absorber Lu3N@C80-PCBEH in view of both photogeneration but also transport and extraction of charge carriers. We apply optical, charge carrier extraction, morphology, and spin-sensitive techniques. In blends containing Lu3N@C80-PCBEH, we found 2 times weaker photoluminescence quenching, remainders of interchain excitons, and, most remarkably, triplet excitons formed on the polymer chain, which were absent in the reference P3HT:PC61BM blends. We show that electron back transfer to the triplet state along with the lower exciton dissociation yield due to intramolecular charge transfer in Lu3N@C80-PCBEH are responsible for the reduced photocurrent. △ Less

Submitted 18 July, 2011; originally announced July 2011.

Journal ref: J. Am. Chem. Soc., 2011, 133 (23), pp 9088--9094

Electronic Trap States in Methanofullerenes

Authors: Julia Schafferhans, Carsten Deibel, Vladimir Dyakonov

Abstract: The trap states in three fullerene derivatives, namely PC61BM ([6,6]-phenyl C61 butyric acid methyl ester), bisPC61BM (bis[6,6]-phenyl C61 butyric acid methyl ester) and PC71BM ([6,6]-phenyl C71 butyric acid methyl ester), are investigated by thermally stimulated current measurements (TSC). Thereby, the lower limit of the trap densities for all studied methanofullerenes exhibits values in the orde… ▽ More The trap states in three fullerene derivatives, namely PC61BM ([6,6]-phenyl C61 butyric acid methyl ester), bisPC61BM (bis[6,6]-phenyl C61 butyric acid methyl ester) and PC71BM ([6,6]-phenyl C71 butyric acid methyl ester), are investigated by thermally stimulated current measurements (TSC). Thereby, the lower limit of the trap densities for all studied methanofullerenes exhibits values in the order of 10^22 m^-3 with the highest trap density in bisPC61BM and the lowest in PC61BM. Fractional TSC measurements on PC61BM reveal a broad trap distribution instead of discrete trap levels with activation energies ranging from 15 meV to 270 meV and the maximum at about 75 meV. The activation energies of the most prominent traps in the other two fullerene derivatives are significantly higher, being at 96 meV and 223 meV for PC71BM and 184 meV for bisPC61BM, respectively. The influence of these findings on the performance of organic solar cells is discussed. △ Less

Submitted 18 July, 2011; originally announced July 2011.

Comments: 7 pages, 5 figures, 1 table

Journal ref: Advanced Energy Materials, 1, 655, (2011)

Influence of Phase Segregation on Recombination Dynamics in Organic Bulk-Heterojunction Solar Cells

Authors: Andreas Baumann, Tom J. Savenije, Dharmapura Hanumantharaya K. Murthy, Martin Heeney, Vladimir Dyakonov, Carsten Deibel

Abstract: We studied the recombination dynamics of charge carriers in organic bulk heterojunction solar cells made of the blend system poly(2,5-bis(3-dodecyl thiophen-2-yl) thieno[2,3-b]thiophene) (pBTCT-C12):[6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) with a donor--acceptor ratio of 1:1 and 1:4. The techniques of charge carrier extraction by linearly increasing voltage (photo-CELIV) and, as local p… ▽ More We studied the recombination dynamics of charge carriers in organic bulk heterojunction solar cells made of the blend system poly(2,5-bis(3-dodecyl thiophen-2-yl) thieno[2,3-b]thiophene) (pBTCT-C12):[6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) with a donor--acceptor ratio of 1:1 and 1:4. The techniques of charge carrier extraction by linearly increasing voltage (photo-CELIV) and, as local probe, time-resolved microwave conductivity (TRMC) were used. We observed a difference in the initially extracted charge carrier concentration in the photo-CELIV experiment by one order of magnitude, which we assigned to an enhanced geminate recombination due to a fine interpenetrating network with isolated phase regions in the 1:1 pBTCT-C12:PC61BM bulk heterojunction solar cells. In contrast, extensive phase segregation in 1:4 blend devices leads to an efficient polaron generation resulting in an increased short circuit current density of the solar cell. For both studied ratios a bimolecular recombination of polarons was found using the complementary experiments. The charge carrier decay order of above two for temperatures below 300 K can be explained by a release of trapped charges. This mechanism leads to a delayed bimolecular recombination processes. The experimental findings can be generalized to all polymer:fullerene blend systems allowing for phase segregation. △ Less

Submitted 8 July, 2011; originally announced July 2011.

Comments: 14 pages, 5 figures

Journal ref: Adv. Func. Mat. 21, 1687 (2011)

First principles calculations of anisotropic charge carrier mobilities in organic semiconductor crystals

Authors: V. Stehr, J. Pfister, R. F. Fink, B. Engels, C. Deibel

Abstract: The orientational dependence of charge carrier mobilities in organic semiconductor crystals and the correlation with the crystal structure are investigated by means of quantum chemical first principles calculations combined with a model using hop** rates from Marcus theory. A master equation approach is presented which is numerically more efficient than the Monte Carlo method frequently applied… ▽ More The orientational dependence of charge carrier mobilities in organic semiconductor crystals and the correlation with the crystal structure are investigated by means of quantum chemical first principles calculations combined with a model using hop** rates from Marcus theory. A master equation approach is presented which is numerically more efficient than the Monte Carlo method frequently applied in this context. Furthermore, it is shown that the widely used approach to calculate the mobility via the diffusion constant along with rate equations is not appropriate in many important cases. The calculations are compared with experimental data, showing good qualitative agreement for pentacene and rubrene. In addition, charge transport properties of core-fluorinated perylene bisimides are investigated. △ Less

Submitted 21 February, 2011; originally announced February 2011.

Comments: 15 pages, 18 figures

Report number: stehr2011

Journal ref: Phys. Rev. B 82, 155208 (2011)

Photoinduced C70 radical anions in polymer:fullerene blends

Authors: Andreas Sperlich, Moritz Liedtke, Julia Kern, Hannes Kraus, Carsten Deibel, Salvatore Filippone, Juan Luis Delgado, Nazario Martín, Vladimir Dyakonov

Abstract: Photoinduced polarons in solid films of polymer-fullerene blends were studied by photoluminescence (PL), photoinduced absorption (PIA) and electron spin resonance (ESR). The donor materials used were P3HT and MEH-PPV. As acceptors we employed PC60BM as reference and various soluble C70-derivates: PC70BM, two different diphenylmethano-[70]fullerene oligoether (C70-DPM-OE) and two dimers, C70-C70 an… ▽ More Photoinduced polarons in solid films of polymer-fullerene blends were studied by photoluminescence (PL), photoinduced absorption (PIA) and electron spin resonance (ESR). The donor materials used were P3HT and MEH-PPV. As acceptors we employed PC60BM as reference and various soluble C70-derivates: PC70BM, two different diphenylmethano-[70]fullerene oligoether (C70-DPM-OE) and two dimers, C70-C70 and C60-C70. Blend films containing C70 revealed characteristic spectroscopic signatures not seen with C60. Light-induced ESR showed signals at g\geq2.005, assigned to an electron localized on the C70 cage. The formation of C70 radical anions also leads to a subgap PIA band at 0.92 eV, hidden in the spectra of C70-based P3HT and MEH-PPV blends, which allows for more exact studies of charge separated states in conjugated polymer:C70 blends. △ Less

Submitted 9 February, 2011; originally announced February 2011.

Comments: 3 pages, 4 figures, accepted for PSS RRL

Journal ref: Phys. Status Solidi RRL 5, No. 3, (2011) 128-130

Role of Polaron Pair Diffusion and Surface Losses in Organic Semiconductor Devices

Authors: T. Strobel, C. Deibel, V. Dyakonov

Abstract: By applying Monte Carlo simulations we found that the extraction of bound polaron pairs (PP) at the electrodes is an important loss factor limiting the efficiency of organic optoelectronic and photovoltaic devices. Based upon this finding, we developed a unified analytic model consisting of exact Onsager theory, describing the dissociation of PP in organic donor-acceptor heterojunctions, the Sokel… ▽ More By applying Monte Carlo simulations we found that the extraction of bound polaron pairs (PP) at the electrodes is an important loss factor limiting the efficiency of organic optoelectronic and photovoltaic devices. Based upon this finding, we developed a unified analytic model consisting of exact Onsager theory, describing the dissociation of PP in organic donor-acceptor heterojunctions, the Sokel-Hughes model for the extraction of free polarons at the electrodes, as well as of PP diffusion leading to the aforementioned loss mechanism, which was not considered previously. Our approach allows to describe the simulation details on a macroscopic scale and to gain fundamental insights, which is important in view of develo** an optimized photovoltaic device configuration. △ Less

Submitted 29 November, 2010; originally announced November 2010.

Comments: 4 pages, 4 figures. Accepted by Phys. Rev. Lett

Report number: strobel2010

Journal ref: Phys. Rev. Lett. 105, 266602 (2010)

Oxygen do** of P3HT:PCBM blends: Influence on trap states, charge carrier mobility and solar cell performance

Authors: Julia Schafferhans, Andreas Baumann, Alexander Wagenpfahl, Carsten Deibel, Vladimir Dyakonov

Abstract: We investigated the influence of oxygen on the performance of P3HT:PCBM (poly(3-hexylthiophene):[6,6]-phenyl C61 butyric acid methyl ester) solar cells by current--voltage, thermally stimulated current (TSC) and charge extraction by linearly increasing voltage (CELIV) measurement techniques. The exposure to oxygen leads to an enhanced charge carrier concentration and a decreased charge carrier mob… ▽ More We investigated the influence of oxygen on the performance of P3HT:PCBM (poly(3-hexylthiophene):[6,6]-phenyl C61 butyric acid methyl ester) solar cells by current--voltage, thermally stimulated current (TSC) and charge extraction by linearly increasing voltage (CELIV) measurement techniques. The exposure to oxygen leads to an enhanced charge carrier concentration and a decreased charge carrier mobility. Further, an enhanced formation of deeper traps was observed, although the overall density of traps was found to be unaffected upon oxygen exposure. With the aid of macroscopic simulations, based on solving the differential equation system of Poisson, continuity and drift-diffusion equations in one dimension, we demonstrate the influence of a reduced charge carrier mobility and an increased charge carrier density on the main solar cell parameters, consistent with experimental findings. △ Less

Submitted 25 August, 2010; originally announced August 2010.

Journal ref: Organic Electronics 11, 1693 (2010)

Spectroscopic Signatures of Photogenerated Radical Anions in Polymer-[C70]Fullerene Bulk Heterojunctions

Authors: M. Liedtke, A. Sperlich, H. Kraus, C. Deibel, V. Dyakonov, S. Filippone, J. L. Delgado, N. Martin, O. G. Poluektov

Abstract: Light induced polarons in solid films of polymer-fullerene blends were studied by applying photoluminescence (PL), photo induced absorption (PIA) techniques as well as electron spin resonance (ESR). The materials used were poly(3-hexylthiophene) (P3HT) and poly-[2-methoxy, 5-(2'-ethyl-hexyloxy) phenylene vinylene] (MEH-PPV) as donors. As acceptors we used [6,6]-phenyl-C61-butyric acid methyl ester… ▽ More Light induced polarons in solid films of polymer-fullerene blends were studied by applying photoluminescence (PL), photo induced absorption (PIA) techniques as well as electron spin resonance (ESR). The materials used were poly(3-hexylthiophene) (P3HT) and poly-[2-methoxy, 5-(2'-ethyl-hexyloxy) phenylene vinylene] (MEH-PPV) as donors. As acceptors we used [6,6]-phenyl-C61-butyric acid methyl ester ([C60]PCBM) and various soluble C70-derivates: [C70]PCBM, diphenylmethano[70]fullerene oligoether (C70-DPM-OE), C70-DPM-OE2, and two fullerene dimers, C70-C70 and C60-C70 (all shown in figure 1). In all blends containing C70 we found typical signatures which were absent if [C60]PCBM was used as acceptor. Light-induced ESR revealed signals at g>=2.005, which we previously assigned to an electron localized on the C70 cage, the PIA measurements showed a new sub-bandgap absorption band at 0.92 eV, which we correspondingly ascribe to C70 radical anions formed in the course of photoinduced electron transfer from donor to acceptor. △ Less

Submitted 9 July, 2010; originally announced July 2010.

Comments: 4 pages, 5 figures

Report number: liedtke2010a

Journal ref: Meet. Abstr. - Electrochem. Soc. 1001, 1494 (2010)

Effect of do** of zinc oxide on the hole mobility of poly(3-hexylthiophene) in hybrid transistors

Authors: Maria S. Hammer, Carsten Deibel, Jens Pflaum, Vladimir Dyakonov

Abstract: Hybrid field effect transistors based on the organic polymer poly(3-hexylthiophene) (P3HT) and inorganic zinc oxide were investigated. In this report we present one of the first studies on hybrid transistors employing one polymeric transport layer. The sol-gel processed ZnO was modified via Al do** between 0.8 and 10 at.%, which allows a systematic variation of the zinc oxide properties, i.e. el… ▽ More Hybrid field effect transistors based on the organic polymer poly(3-hexylthiophene) (P3HT) and inorganic zinc oxide were investigated. In this report we present one of the first studies on hybrid transistors employing one polymeric transport layer. The sol-gel processed ZnO was modified via Al do** between 0.8 and 10 at.%, which allows a systematic variation of the zinc oxide properties, i.e. electron mobility and morphology. With increasing do** level we observe on the one hand a decrease of the electron mobilities by two orders of magnitude,on the other hand do** enforces a morphological change of the zinc oxide layer which enables the infiltration of P3HT into the inorganic matrix. X-ray reflectivity (XRR) measurements confirm this significant change in the interface morphology for the various do** levels. We demonstrate that do** of ZnO is a tool to adjust the charge transport in ZnO/P3HT hybrids, using one single injecting metal (Au bottom contact) on a SiO2 dielectric. We observe an influence of the zinc oxide layer on the hole mobility in P3HT which we can modify via Al do** of ZnO. Hence, maximum hole mobility of 5e-4 cm^2/Vs in the hybrid system with 2 at.% Al do**. 5 at.% Al do** leads to a balanced mobility in the organic/inorganic hybrid system but also to a small on/off ratio due to high off-currents. △ Less

Submitted 25 June, 2010; originally announced June 2010.

Comments: 15 pages, 8 figures, accepted for publication in Organic Electronics

Report number: hammer2010

Journal ref: Org. Electron. 11, 1569 (2010)

Comment on "Interface state recombination in organic solar cells"

Authors: C. Deibel, A. Wagenpfahl

Abstract: In a recent paper, Street et al. [Phys. Rev. B 81, 205307 (2010)] propose first order recombination due to interface states to be the dominant loss mechanism in organic bulk heterojunction solar cells, based on steady-state current--voltage characteristics. By applying macroscopic simulations, we found that under typical solar cell conditions, monomolecular or bimolecular recombination cannot be i… ▽ More In a recent paper, Street et al. [Phys. Rev. B 81, 205307 (2010)] propose first order recombination due to interface states to be the dominant loss mechanism in organic bulk heterojunction solar cells, based on steady-state current--voltage characteristics. By applying macroscopic simulations, we found that under typical solar cell conditions, monomolecular or bimolecular recombination cannot be inferred from the slope of the light intensity dependent photocurrent. In addition, we discuss the validity of calculating a mobility--lifetime product from steady-state measurements. We conclude that the experimental technique applied by Street et al. is not sufficient to unambiguously determine the loss mechanism. △ Less

Submitted 26 October, 2010; v1 submitted 24 June, 2010; originally announced June 2010.

Comments: 4 pages, 2 figures. Corrected Eqns. (2) and (4): 1/... was missing

Report number: deibel2010b

Journal ref: Phys. Rev. B 82, 207301 (2010)

Charge Carrier Extraction by Linearly Increasing Voltage:Analytic framework and ambipolar transients

Authors: Jens Lorrmann, Bekele Homa Badada, Olle Inganäs, Vladimir Dyakonov, Carsten Deibel

Abstract: Up to now the basic theoretical description of charge extraction by linearly increasing voltage (CELIV) is solved for a low conductivity approximation only. Here we present the full analytical solution, thus generalize the theoretical framework for this method. We compare the analytical solution and the approximated theory, showing that especially for typical organic solar cell materials the latte… ▽ More Up to now the basic theoretical description of charge extraction by linearly increasing voltage (CELIV) is solved for a low conductivity approximation only. Here we present the full analytical solution, thus generalize the theoretical framework for this method. We compare the analytical solution and the approximated theory, showing that especially for typical organic solar cell materials the latter approach has a very limited validity. Photo-CELIV measurements on poly(3-hexyl thiophene-2,5-diyl):[6,6]-phenyl-C61 butyric acid methyl ester based solar cells were then evaluated by fitting the current transients to the analytical solution. We found that the fit results are in a very good agreement with the experimental observations, if ambipolar transport is taken into account, the origin of which we will discuss. Furthermore we present parametric equations for the mobility and the charge carrier density, which can be applied over the entire experimental range of parameters. △ Less

Submitted 29 October, 2010; v1 submitted 22 June, 2010; originally announced June 2010.

Comments: 8 pages, 5 figures

Journal ref: J. Appl. Phys. 108, 113705 (2010)

S-shaped current-voltage characteristics of organic solar devices

Authors: A. Wagenpfahl, D. Rauh, M. Binder, C. Deibel, V. Dyakonov

Abstract: Measuring the current-voltage characteristic of organic bulk heterojunction solar devices sometimes reveals an s-shaped deformation. We qualitatively produce this behaviour by a numerical device simulation assuming a reduced surface recombination. Furthermore we show how to experimentally create these double diodes by applying an oxygen plasma etch on the indium tin oxide (ITO) anode. Restricted c… ▽ More Measuring the current-voltage characteristic of organic bulk heterojunction solar devices sometimes reveals an s-shaped deformation. We qualitatively produce this behaviour by a numerical device simulation assuming a reduced surface recombination. Furthermore we show how to experimentally create these double diodes by applying an oxygen plasma etch on the indium tin oxide (ITO) anode. Restricted charge transport over material interfaces accumulates space charges and therefore creates s-shaped deformations. Finally we discuss the consequences of our findings for the open circuit voltage $V_{oc}$ △ Less

Submitted 10 September, 2010; v1 submitted 31 May, 2010; originally announced May 2010.

Comments: 9 pages, 7 figures

Journal ref: Phys. Rev. B 82, 115306 (2010)

Polymer-Fullerene Bulk Heterojunction Solar Cells

Authors: Carsten Deibel, Vladimir Dyakonov

Abstract: Organic solar cells have the potential to be low-cost and efficient solar energy converters, with a promising energy balance. They are made from carbon-based semiconductors, which exhibit favourable light absorption and charge generation properties, and can be manufactured by low temperature processes such as printing from solvent-based inks, which are compatible with flexible plastic substrates o… ▽ More Organic solar cells have the potential to be low-cost and efficient solar energy converters, with a promising energy balance. They are made from carbon-based semiconductors, which exhibit favourable light absorption and charge generation properties, and can be manufactured by low temperature processes such as printing from solvent-based inks, which are compatible with flexible plastic substrates or even paper. In this review, we will present an overview of the physical function of organic solar cells, their state-of-the-art performance and limitations, as well as novel concepts to achieve a better material stability and higher power conversion efficiencies. We will also briefly review processing and cost in view of the market potential. △ Less

Submitted 30 August, 2010; v1 submitted 1 March, 2010; originally announced March 2010.

Comments: 68 pages, 16 figures. Minor changes

Report number: deibel2010review

Journal ref: Rep. Prog. Phys. 73, 096401 (2010)

Polymeric Squaraine Dyes as Electron Donors in Bulk Heterojunction Solar Cells

Authors: Sebastian F. Voelker, Shinobu Uemura, Moritz Limpinsel, Markus Mingebach, Carsten Deibel, Vladimir Dyakonov, Christoph Lambert

Abstract: A polysquaraine low band gap polymer was synthesized by Yamamoto coupling of a monomeric dibromo indolenine squaraine dye. The resulting polymer has a weight average molar mass in the order of Mw ~30.000-50.000 and a polydispersity of ca. 1.7 as determined by gel-permeation chromatography (GPC). The electronic properties of monomer and polymer were investigated by cyclic voltammetry, absorption… ▽ More A polysquaraine low band gap polymer was synthesized by Yamamoto coupling of a monomeric dibromo indolenine squaraine dye. The resulting polymer has a weight average molar mass in the order of Mw ~30.000-50.000 and a polydispersity of ca. 1.7 as determined by gel-permeation chromatography (GPC). The electronic properties of monomer and polymer were investigated by cyclic voltammetry, absorption and emission spectroscopy. Owing to exciton coupling the absorption bands of the polymer are red-shifted and strongly broadened compared to the monomer squaraine dye. Bulk heterojunction solar cells were prepared from blends of the polysquaraine with the fullerene derivative [6,6]-phenyl C61-butyric acid methyl ester (PCBM) in different weight ratios (1:3 to 1:1). The power conversion efficiencies under simulated AM 1.5 conditions yielded 0.45 % for these non-optimized systems. The external quantum efficiency (EQE) shows that the photoresponse spans the range from 300 to 850 nm, which illustrates the promising properties of this novel organic semiconductor as a low band gap donor material in organic photovoltaics. △ Less

Submitted 18 February, 2010; originally announced February 2010.

Comments: 10 pages, 7 figures

Report number: voelker2010

Journal ref: Macromol. Chem. Phys. 211, 1098 (2010)

Organic solar cell efficiencies under the aspect of reduced surface recombination velocities

Authors: A. Wagenpfahl, C. Deibel, V. Dyakonov

Abstract: The charge carrier mobility is a key parameter for the organic bulk heterojunction solar cell efficiency. It was recently shown that the interplay charge carrier transport and recombination, both depending on electron and hole mobilities, leads to a point of maximum power conversion efficiency at a finite mobility. Changes of bulk and surface recombination rate, however, can strongly influence t… ▽ More The charge carrier mobility is a key parameter for the organic bulk heterojunction solar cell efficiency. It was recently shown that the interplay charge carrier transport and recombination, both depending on electron and hole mobilities, leads to a point of maximum power conversion efficiency at a finite mobility. Changes of bulk and surface recombination rate, however, can strongly influence this behavior. These processes were previously not considered adequately, as surface recombination velocities of infinity were implicitly assumed or bulk recombination parameters not discussed in detail. In this manuscript, using a macroscopic effective medium simulation, we consider how a reduced bulk recombination process in combination with finite surface recombination velocities affect the power conversion efficiency. Instead of a maximum efficiency at a specific charge carrier mobility, we show that with realistic assumptions and passivated surfaces the efficiency is increased further, saturating only at higher mobilities. Thus, a mobility optimisation is more important for the solar cell performance then previously shown. △ Less

Submitted 16 February, 2010; v1 submitted 27 January, 2010; originally announced January 2010.

Comments: 6 pages, 5 figures

Report number: wagenpfahl2010

Journal ref: IEEE J. Sel. Top. Quantum Electron. 16, 1759 (2010)

Investigation of the Photocurrent in Bulk Heterojunction Solar Cells

Authors: M. Limpinsel, A. Wagenpfahl, M. Mingebach, C. Deibel, V. Dyakonov

Abstract: We investigated the photocurrent in poly(3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-phenyl-C$_{61}$ butyric acid methyl ester (PCBM) solar cells by applying a pulsed measurement technique. For annealed samples, a point of optimal symmetry (POS) with a corresponding voltage $V_\text{POS}$ of 0.52--0.64 V could be determined. Based on macroscopic simulations and results from capacitance--voltage meas… ▽ More We investigated the photocurrent in poly(3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-phenyl-C$_{61}$ butyric acid methyl ester (PCBM) solar cells by applying a pulsed measurement technique. For annealed samples, a point of optimal symmetry (POS) with a corresponding voltage $V_\text{POS}$ of 0.52--0.64 V could be determined. Based on macroscopic simulations and results from capacitance--voltage measurements, we identify this voltage with flat band conditions in the bulk of the cell, but not the built-in voltage as proposed by [Ooi et al., J. Mater. Chem. 18 (2008) 1644]. We calculated the field dependent polaron pair dissociation after Onsager--Braun and the voltage dependent extraction of charge carriers after Sokel and Hughes with respect to this point of symmetry. Our analysis allows to explain the experimental photocurrent in both forward and reverse directions. Also, we observed a voltage--independent offset of the photocurrent. As this offset is crucial for the device performance, we investigated its dependence on cathode material and thermal treatment. From our considerations we gain new insight into the photocurrent`s voltage dependence and the limitations of device efficiency. △ Less

Submitted 14 January, 2010; originally announced January 2010.

Comments: 6 pages, 7 figures

Report number: limpinsel2010

Journal ref: Phys. Rev. B 81, 085203 (2010)

Energetics of Excited States in the Conjugated Polymer Poly(3-hexylthiophene)

Authors: Carsten Deibel, Daniel Mack, Julien Gorenflot, Achim Schoell, Stefan Krause, Friedrich Reinert, Daniel Rauh, Vladimir Dyakonov

Abstract: There is an enormous potential in applying conjugated polymers in novel organic opto-electronic devices such as light emitting diodes and solar cells. Although prototypes and first products exist, a comprehensive understanding of the fundamental processes and energetics involved during photoexcitation is still lacking and limits further device optimisations. Here we report on a unique analysis o… ▽ More There is an enormous potential in applying conjugated polymers in novel organic opto-electronic devices such as light emitting diodes and solar cells. Although prototypes and first products exist, a comprehensive understanding of the fundamental processes and energetics involved during photoexcitation is still lacking and limits further device optimisations. Here we report on a unique analysis of the excited states involved in charge generation by photoexcitation. On the model system poly(3-hexylthiophene) (P3HT), we demonstrate the general applicability of our novel approach. From photoemission spectroscopy of occupied and unoccupied states we determine the transport gap to 2.6 eV, which we show to be in agreement with the onset of photoconductivity by spectrally resolved photocurrent measurements. For photogenerated singlet exciton at the absorption edge, 0.7 eV of excess energy are required to overcome the binding energy; the intermediate charge transfer state is situated only 0.3 eV above the singlet exciton. Our results give direct evidence of energy levels involved in the photogeneration and charge transport within conjugated polymers. △ Less

Submitted 13 January, 2010; originally announced January 2010.

Comments: 5 pages, 4 figures

Report number: deibel2010

Journal ref: Phys. Rev. B 81, 085202 (2010)

Improvement of the poly-3-hexylthiophene transistor performance using small molecule contact functionalization

Authors: Rebecca Winter, Maria S Hammer, Carsten Deibel, Jens Pflaum

Abstract: We demonstrate an approach to improve poly-3-hexylthiophene field effect transistors by modifying the gold contacts with monolayer thick pentacenequinone (PQ) or naphthalene (NL). The effective contact resistance is reduced by a factor of two and sixteen for interlayers of PQ and NL, respectively. The observation is attributed to different injection barriers at the metal-organic interface caused… ▽ More We demonstrate an approach to improve poly-3-hexylthiophene field effect transistors by modifying the gold contacts with monolayer thick pentacenequinone (PQ) or naphthalene (NL). The effective contact resistance is reduced by a factor of two and sixteen for interlayers of PQ and NL, respectively. The observation is attributed to different injection barriers at the metal-organic interface caused by the functionalization and to an additional tunneling barrier enhancing the on/off ratios. This barrier yields to activation energies of 37meV (NL) and 104meV (PQ) below 190K, which are smaller than without functionalization, 117meV. △ Less

Submitted 7 December, 2009; originally announced December 2009.

Comments: 4 pages, 3 figures, 1 table; accepted for publication by Appl. Phys. Lett

Report number: winter2009

Journal ref: Appl. Phys. Lett. 95, 263313 (2009)

Polaron Recombination in Pristine and Annealed Bulk Heterojunction Solar Cells

Authors: C. Deibel, A. Baumann, A. Wagenpfahl, V. Dyakonov

Abstract: The major loss mechanism of photogenerated polarons was investigated in P3HT:PCBM solar cells by the photo-CELIV technique. For pristine and annealed devices, we find that the experimental data can be explained by a bimolecular recombination rate reduced by a factor of about ten (pristine) and 25 (annealed) as compared to Langevin theory. Aided by a macroscopic device model, we discuss the impli… ▽ More The major loss mechanism of photogenerated polarons was investigated in P3HT:PCBM solar cells by the photo-CELIV technique. For pristine and annealed devices, we find that the experimental data can be explained by a bimolecular recombination rate reduced by a factor of about ten (pristine) and 25 (annealed) as compared to Langevin theory. Aided by a macroscopic device model, we discuss the implications of the lowered loss rate on the characteristics of polymer:fullerene solar cells. △ Less

Submitted 15 July, 2009; originally announced July 2009.

Comments: 3 pages, 4 figures

Report number: deibel2009b

Journal ref: Synth. Met. 159, 2345 (2009)

Origin of Reduced Polaron Recombination in Organic Semiconductor Devices

Authors: C. Deibel, A. Wagenpfahl, V. Dyakonov

Abstract: We propose a model to explain the reduced bimolecular recombination rate found in state-of-the-art bulk heterojunction solar cells. When compared to the Langevin recombination, the experimentally observed rate is one to four orders of magnitude lower, but gets closer to the Langevin case for low temperatures. Our model considers the organic solar cell as device with carrier concentration gradien… ▽ More We propose a model to explain the reduced bimolecular recombination rate found in state-of-the-art bulk heterojunction solar cells. When compared to the Langevin recombination, the experimentally observed rate is one to four orders of magnitude lower, but gets closer to the Langevin case for low temperatures. Our model considers the organic solar cell as device with carrier concentration gradients, which form due to the electrode/blend/electrode device configuration. The resulting electron concentration under working conditions of a solar cell is higher at the cathode than at the anode, and vice versa for holes. Therefore, the spatially dependent bimolecular recombination rate, proportional to the local product of electron and hole concentration, is much lower as compared to the calculation of the recombination rate based on the extracted and thus averaged charge carrier concentrations. We consider also the temperature dependence of the recombination rate, which can for the first time be described with our model. △ Less

Submitted 14 July, 2009; originally announced July 2009.

Comments: 7 pages, 6 figures

Report number: deibel2009

Journal ref: Phys. Rev. B 80, 075203 (2009)

Charge Carrier Dissociation and Recombination in Polymer Solar Cells

Authors: C. Deibel

Abstract: In polymer:fullerene solar cells, the origin of the losses in the field-dependent photocurrent is still controversially debated. We contribute to the ongoing discussion by performing photo-induced charge extraction measurements on poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C$_{61}$ butyric acid methyl ester solar cells in order to investigate the processes ruling charge carrier decay. Calculat… ▽ More In polymer:fullerene solar cells, the origin of the losses in the field-dependent photocurrent is still controversially debated. We contribute to the ongoing discussion by performing photo-induced charge extraction measurements on poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C$_{61}$ butyric acid methyl ester solar cells in order to investigate the processes ruling charge carrier decay. Calculating the drift length of photogenerated charges, we find that polaron recombination is not limiting the photocurrent for annealed devices. Additionally, we applied Monte Carlo simulations on blends of conjugated polymer chain donors with acceptor molecules in order to gain insight into the polaron pair dissociation. The dissociation yield turns out to be rather high, with only a weak field dependence. With this complementary view on dissociation and recombination, we stress the importance of accounting for polaron pair dissociation, polaron recombination as well as charge extraction when considering the loss mechanisms in organic solar cells. △ Less

Submitted 14 July, 2009; originally announced July 2009.

Comments: 6 pages, 7 figues

Report number: deibel2009c

Journal ref: Phys. Status Solidi A, 206, 2731 (2009)