-
Single-Phase L1$_{0}$-Ordered High Entropy Thin Films with High Magnetic Anisotropy
Authors:
Willie B. Beeson,
Dinesh Bista,
Huairuo Zhang,
Sergiy Krylyuk,
Albert V. Davydov,
Gen Yin,
Kai Liu
Abstract:
The vast high entropy alloy (HEA) composition space is promising for discovery of new material phases with unique properties. We explore the potential to achieve rare-earth-free high magnetic anisotropy materials in single-phase HEA thin films. Thin films of FeCoNiMnCu sputtered on thermally oxidized Si/SiO$_{2}$ substrates at room temperature are magnetically soft, with a coercivity on the order…
▽ More
The vast high entropy alloy (HEA) composition space is promising for discovery of new material phases with unique properties. We explore the potential to achieve rare-earth-free high magnetic anisotropy materials in single-phase HEA thin films. Thin films of FeCoNiMnCu sputtered on thermally oxidized Si/SiO$_{2}$ substrates at room temperature are magnetically soft, with a coercivity on the order of 10 Oe. After post-deposition rapid thermal annealing (RTA), the films exhibit a single face-centered-cubic phase, with an almost 40-fold increase in coercivity. Inclusion of 50 at.% Pt in the film leads to ordering of a single L1$_{0}$ high entropy intermetallic phase after RTA, along with high magnetic anisotropy and 3 orders of magnitude coercivity increase. These results demonstrate a promising HEA approach to achieve high magnetic anisotropy materials using RTA.
△ Less
Submitted 24 May, 2024; v1 submitted 11 November, 2023;
originally announced November 2023.
-
Phonon States in NbTe$_4$ and TaTe$_4$ Quasi-One-Dimensional van der Waals Crystals
Authors:
Zahra Ebrahim Nataj,
Fariborz Kargar,
Sergiy Krylyuk,
Topojit Debnath,
Maedeh Taheri,
Subhajit Ghosh,
Huairuo Zhang,
Albert V. Davydov,
Roger K. Lake,
Alexander A. Balandin
Abstract:
We report the results of polarization-dependent Raman spectroscopy of phonon states in single-crystalline quasi-one-dimensional NbTe$_4$ and TaTe$_4$ van der Waals materials. The measurements were conducted in the wide temperature range from 80 K to 560 K. Our results show that although both materials have identical crystal structures and symmetries, there is a drastic difference in the intensity…
▽ More
We report the results of polarization-dependent Raman spectroscopy of phonon states in single-crystalline quasi-one-dimensional NbTe$_4$ and TaTe$_4$ van der Waals materials. The measurements were conducted in the wide temperature range from 80 K to 560 K. Our results show that although both materials have identical crystal structures and symmetries, there is a drastic difference in the intensity of their Raman spectra. While TaTe4 exhibits well-defined peaks through the examined frequency and temperature ranges, NbTe4 reveals extremely weak Raman signatures. The measured spectral positions of the phonon peaks agree with the phonon band structure calculated using the density-functional theory. We offer possible reasons for the in-tensity differences between the two van der Waals materials. Our results provide insights into the phonon properties of NbTe$_4$ and TaTe$_4$ van der Waals materials and indicate the potential of Raman spectroscopy for studying charge-density-wave quantum condensate phases.
△ Less
Submitted 5 November, 2023;
originally announced November 2023.
-
Ultra-fast Vacancy Migration: A Novel Approach for Synthesizing Sub-10 nm Crystalline Transition Metal Dichalcogenide Nanocrystals
Authors:
Pawan Kumar,
Jiazheng Chen,
Andrew C. Meng,
Wei-Chang D. Yang,
Surendra B. Anantharaman,
James P. Horwath,
Juan C. Idrobo,
Himani Mishra,
Yuanyue Liu,
Albert V. Davydov,
Eric A. Stach,
Deep Jariwala
Abstract:
Two-dimensional materials, such as transition metal dichalcogenides (TMDCs), have the potential to revolutionize the field of electronics and photonics due to their unique physical and structural properties. This research presents a novel method for synthesizing crystalline TMDCs crystals with < 10 nm size using ultra-fast migration of vacancies at elevated temperatures. Through in-situ and ex-sit…
▽ More
Two-dimensional materials, such as transition metal dichalcogenides (TMDCs), have the potential to revolutionize the field of electronics and photonics due to their unique physical and structural properties. This research presents a novel method for synthesizing crystalline TMDCs crystals with < 10 nm size using ultra-fast migration of vacancies at elevated temperatures. Through in-situ and ex-situ processing and using atomic-level characterization techniques, we analyze the shape, size, crystallinity, composition, and strain distribution of these nanocrystals. These nanocrystals exhibit electronic structure signatures that differ from the 2D bulk i.e., uniform mono and multilayers. Further, our in-situ, vacuum-based synthesis technique allows observation and comparison of defect and phase evolution in these crystals formed under van der Waals heterostructure confinement versus unconfined conditions. Overall, this research demonstrates a solid-state route to synthesizing uniform nanocrystals of TMDCs and lays the foundation for materials science in confined 2D spaces under extreme conditions.
△ Less
Submitted 10 July, 2023;
originally announced July 2023.
-
Giant Hall Switching by Surface-State-Mediated Spin-Orbit Torque in a Hard Ferromagnetic Topological Insulator
Authors:
Lixuan Tai,
Haoran He,
Su Kong Chong,
Huairuo Zhang,
Hanshen Huang,
Gang Qiu,
Yaochen Li,
Hung-Yu Yang,
Ting-Hsun Yang,
Xiang Dong,
Yuxing Ren,
Bingqian Dai,
Tao Qu,
Qingyuan Shu,
Quanjun Pan,
Peng Zhang,
Fei Xue,
Jie Li,
Albert V. Davydov,
Kang L. Wang
Abstract:
Topological insulators (TI) and magnetic topological insulators (MTI) can apply highly efficient spin-orbit torque (SOT) and manipulate the magnetization with their unique topological surface states with ultra-high efficiency. Here, we demonstrate efficient SOT switching of a hard MTI, V-doped (Bi,Sb)2Te3 (VBST) with a large coercive field that can prevent the influence of an external magnetic fie…
▽ More
Topological insulators (TI) and magnetic topological insulators (MTI) can apply highly efficient spin-orbit torque (SOT) and manipulate the magnetization with their unique topological surface states with ultra-high efficiency. Here, we demonstrate efficient SOT switching of a hard MTI, V-doped (Bi,Sb)2Te3 (VBST) with a large coercive field that can prevent the influence of an external magnetic field. A giant switched anomalous Hall resistance of 9.2 $kΩ$ is realized, among the largest of all SOT systems. The SOT switching current density can be reduced to $2.8\times10^5 A/cm^2$. Moreover, as the Fermi level is moved away from the Dirac point by both gate and composition tuning, VBST exhibits a transition from edge-state-mediated to surface-state-mediated transport, thus enhancing the SOT effective field to $1.56\pm 0.12 T/ (10^6 A/cm^2)$ and the interfacial charge-to-spin conversion efficiency to $3.9\pm 0.3 nm^{-1}$. The findings establish VBST as an extraordinary candidate for energy-efficient magnetic memory devices.
△ Less
Submitted 12 May, 2024; v1 submitted 8 June, 2023;
originally announced June 2023.
-
Nitrogen-Based Magneto-Ionic Manipulation of Exchange Bias in CoFe/MnN Heterostructures
Authors:
Christopher J. Jensen,
Alberto Quintana,
Patrick Quarterman,
Alexander J. Grutter,
Purnima P. Balakrishnan,
Huairuo Zhang,
Albert V. Davydov,
Xixiang Zhang,
Kai Liu
Abstract:
Electric field control of the exchange bias effect across ferromagnet/antiferromagnet (FM/AF) interfaces has offered exciting potentials for low-energy-dissipation spintronics. In particular, the solid state magneto-ionic means is highly appealing as it may allow reconfigurable electronics by transforming the all-important FM/AF interfaces through ionic migration. In this work, we demonstrate an a…
▽ More
Electric field control of the exchange bias effect across ferromagnet/antiferromagnet (FM/AF) interfaces has offered exciting potentials for low-energy-dissipation spintronics. In particular, the solid state magneto-ionic means is highly appealing as it may allow reconfigurable electronics by transforming the all-important FM/AF interfaces through ionic migration. In this work, we demonstrate an approach that combines the chemically induced magneto-ionic effect with the electric field driving of nitrogen in the Ta/Co$_{0.7}$Fe$_{0.3}$/MnN/Ta structure to electrically manipulate exchange bias. Upon field-cooling the heterostructure, ionic diffusion of nitrogen from MnN into the Ta layers occurs. A significant exchange bias of 618 Oe at 300 K and 1484 Oe at 10 K is observed, which can be further enhanced after a voltage conditioning by 5% and 19%, respectively. This enhancement can be reversed by voltage conditioning with an opposite polarity. Nitrogen migration within the MnN layer and into the Ta cap** layer cause the enhancement in exchange bias, which is observed in polarized neutron reflectometry studies. These results demonstrate an effective nitrogen-ion based magneto-ionic manipulation of exchange bias in solid-state devices.
△ Less
Submitted 25 March, 2023;
originally announced March 2023.
-
Concurrent Ferromagnetism and Superconductivity in Fe(Te,Se) van der Waals Josephson Junctions
Authors:
Gang Qiu,
Hung-Yu Yang,
Lunhui Hu,
Huairuo Zhang,
Chih-Yen Chen,
Yanfeng Lyu,
Christopher Eckberg,
Peng Deng,
Sergiy Krylyuk,
Albert V. Davydov,
Ruixing Zhang,
Kang L. Wang
Abstract:
Ferromagnetism and superconductivity are two key ingredients to create non-Abelian quasiparticle excitations that are expected as building blocks to construct topological quantum computers. Adversely, ferromagnetism and superconductivity are typically also two hostile orderings competing to align spins in different configurations, making the material design and experimental implementation extremel…
▽ More
Ferromagnetism and superconductivity are two key ingredients to create non-Abelian quasiparticle excitations that are expected as building blocks to construct topological quantum computers. Adversely, ferromagnetism and superconductivity are typically also two hostile orderings competing to align spins in different configurations, making the material design and experimental implementation extremely challenging. Recently, iron-based superconductor Fe(Te,Se) has emerged as a connate topological superconductor (TSC), which differentiates itself from other hybrid TSCs by self-proximitizing its Dirac surface states with bulk superconductivity. So far, the efforts to search for Majorana states in this material are prevalently focused on spectroscopy techniques. In this paper, we present the global transport signature of interfacial magnetism coexisting with superconductivity. Time-reversal symmetry breaking superconducting states are confirmed through device level transport measurements for the first time in a van der Waals (vdW) Josephson junction structure. Magnetic hysteresis is observed in this device scheme, which only appears below the superconducting critical temperature, leading to potential Fulde-Ferrell (FF) superconducting pairing mechanisms. The 0-π phase mixing in the Fraunhofer patterns pinpoints the ferromagnetic state dwelling on the surface. Furthermore, a stochastic field-free superconducting diode effect also confirms the spontaneous time-reversal symmetry breaking which reflects the behavior of the ferromagnetism. Our work paves a new way to explore topological superconductivity in iron-based superconductors for future high Tc fault-tolerant qubit implementations from a device perspective.
△ Less
Submitted 11 October, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
Rydberg Excitons and Trions in Monolayer MoTe$_2$
Authors:
Souvik Biswas,
Aurélie Champagne,
Jonah B. Haber,
Supavit Pokawanvit,
Joeson Wong,
Hamidreza Akbari,
Sergiy Krylyuk,
Kenji Watanabe,
Takashi Taniguchi,
Albert V. Davydov,
Zakaria Y. Al Balushi,
Diana Y. Qiu,
Felipe H. da Jornada,
Jeffrey B. Neaton,
Harry A. Atwater
Abstract:
Monolayer transition metal dichalcogenide (TMDC) semiconductors exhibit strong excitonic optical resonances which serve as a microscopic, non-invasive probe into their fundamental properties. Like the hydrogen atom, such excitons can exhibit an entire Rydberg series of resonances. Excitons have been extensively studied in most TMDCs (MoS$_2$, MoSe$_2$, WS$_2$ and WSe$_2$), but detailed exploration…
▽ More
Monolayer transition metal dichalcogenide (TMDC) semiconductors exhibit strong excitonic optical resonances which serve as a microscopic, non-invasive probe into their fundamental properties. Like the hydrogen atom, such excitons can exhibit an entire Rydberg series of resonances. Excitons have been extensively studied in most TMDCs (MoS$_2$, MoSe$_2$, WS$_2$ and WSe$_2$), but detailed exploration of excitonic phenomena has been lacking in the important TMDC material molybdenum ditelluride (MoTe$_2$). Here, we report an experimental investigation of excitonic luminescence properties of monolayer MoTe$_2$ to understand the excitonic Rydberg series, up to 3s. We report significant modification of emission energies with temperature (4K to 300K), quantifying the exciton-phonon coupling. Furthermore, we observe a strongly gate-tunable exciton-trion interplay for all the Rydberg states governed mainly by free-carrier screening, Pauli blocking, and band-gap renormalization in agreement with the results of first-principles GW plus Bethe-Salpeter equation approach calculations. Our results help bring monolayer MoTe$_2$ closer to its potential applications in near-infrared optoelectronics and photonic devices.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Specifics of the Elemental Excitations in "True One-Dimensional" MoI$_3$ van der Waals Nanowires
Authors:
Fariborz Kargar,
Zahra Barani,
Nicholas R. Sesing,
Thuc T. Mai,
Topojit Debnath,
Huairuo Zhang,
Yuhang Liu,
Yanbing Zhu,
Subhajit Ghosh,
Adam J. Biacchi,
Felipe H. da Jornada,
Ludwig Bartels,
Tehseen Adel,
Angela R. Hight Walker,
Albert V. Davydov,
Tina T. Salguero,
Roger K. Lake,
Alexander A. Balandin
Abstract:
We report on the temperature evolution of the polarization-dependent Raman spectrum of exfoliated MoI$_3$, a van der Waals material with a "true one-dimensional" crystal structure that can be exfoliated to individual atomic chains. The temperature evolution of several Raman features reveals anomalous behavior suggesting a phase transition of a magnetic origin. Theoretical considerations indicate t…
▽ More
We report on the temperature evolution of the polarization-dependent Raman spectrum of exfoliated MoI$_3$, a van der Waals material with a "true one-dimensional" crystal structure that can be exfoliated to individual atomic chains. The temperature evolution of several Raman features reveals anomalous behavior suggesting a phase transition of a magnetic origin. Theoretical considerations indicate that MoI$_3$ is an easy-plane antiferromagnet with alternating spins along the dimerized chains and with inter-chain helical spin ordering. The calculated frequencies of the phonons and magnons are consistent with the interpretation of the experimental Raman data. The obtained results shed light on the specifics of the phononic and magnonic states in MoI$_3$ and provide a strong motivation for future study of this unique material with potential for spintronic device applications.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Asymmetrical contact scaling and measurements in MoS2 FETs
Authors:
Zhihui Cheng,
Jonathan Backman,
Huairuo Zhang,
Hattan Abuzaid,
Guoqing Li,
Yifei Yu,
Linyou Cao,
Albert V. Davydov,
Mathieu Luisier,
Curt A. Richter,
Aaron D. Franklin
Abstract:
Two-dimensional (2D) materials have great potential for use in future electronics due to their atomically thin nature which withstands short channel effects and thus enables better scalability. Device scaling is the process of reducing all device dimensions to achieve higher device density in a certain chip area. For 2D materials-based transistors, both the channel and contact scalability must be…
▽ More
Two-dimensional (2D) materials have great potential for use in future electronics due to their atomically thin nature which withstands short channel effects and thus enables better scalability. Device scaling is the process of reducing all device dimensions to achieve higher device density in a certain chip area. For 2D materials-based transistors, both the channel and contact scalability must be investigated. The channel scalability of 2D materials has been thoroughly investigated, confirming their resilience to short-channel effects. However, systematic studies on contact scalability remain rare and the current understanding of contact scaling in 2D FET is inconsistent and oversimplified. Here we combine physically scaled contacts and asymmetrical contact measurements to investigate the contact scaling behavior in 2D field-effect transistors (FETs). The asymmetrical contact measurements directly compare electron injection with different contact lengths while using the exact same channel, eliminating channel-to-channel variations. Compared to devices with long contact lengths, devices with short contact lengths (scaled contacts) exhibit larger variation, smaller drain currents at high drain-source voltages, and a higher chance of showing early saturation and negative differential resistance. Quantum transport simulations show that the transfer length of Ni-MoS2 contacts can be as short as 5 nm. Our results suggest that charge injection at the source contact is different from injection at the drain side: scaled source contacts can limit the drain current, whereas scaled drain contacts cannot. Furthermore, we clearly identified that the transfer length depends on the quality of the metal-2D interface. The asymmetrical contact measurements proposed here will enable further understanding of contact scaling behavior at various interfaces.
△ Less
Submitted 24 September, 2022; v1 submitted 9 September, 2022;
originally announced September 2022.
-
Visualizing the out-of-plane electronic dispersions in an intercalated transition metal dichalcogenide
Authors:
Xian P. Yang,
Harrison LaBollita,
Zi-Jia Cheng,
Hari Bhandari,
Tyler A. Cochran,
Jia-Xin Yin,
Md. Shafayat Hossain,
Ilya Belopolski,
Qi Zhang,
Yuxiao Jiang,
Nana Shumiya,
Daniel Multer,
Maksim Liskevich,
Dmitry A. Usanov,
Yanliu Dang,
Vladimir N. Strocov,
Albert V. Davydov,
Nirmal J. Ghimire,
Antia S. Botana,
M. Zahid Hasan
Abstract:
Layered transition metal dichalcogenides have rich phase diagram and they feature two dimensionality on numerous physical properties. Co1/3NbS2 is one of the newest members of this family where Co atoms are intercalated into the Van der Waals gaps between NbS2 layers. We study the three-dimensional electronic band structure of Co1/3NbS2 using both surface and bulk sensitive angle-resolved photoemi…
▽ More
Layered transition metal dichalcogenides have rich phase diagram and they feature two dimensionality on numerous physical properties. Co1/3NbS2 is one of the newest members of this family where Co atoms are intercalated into the Van der Waals gaps between NbS2 layers. We study the three-dimensional electronic band structure of Co1/3NbS2 using both surface and bulk sensitive angle-resolved photoemission spectroscopy. We show that the electronic bands do not fit into the rigid-band-shift picture after the Co intercalation. Instead, Co1/3NbS2 displays a different orbital character near the Fermi level compared to the pristine NbS2 compound and has a clear band dispersion in kz direction despite its layered structure. Our photoemission study demonstrates the out-of-plane electronic correlations introduced by the Co intercalation, thus offering a new perspective on this compound. Finally, we propose how Fermi level tuning could lead to exotic phases such as spin density wave instability.
△ Less
Submitted 1 March, 2022;
originally announced March 2022.
-
Spatially-Resolved Band Gap and Dielectric Function in 2D Materials from Electron Energy Loss Spectroscopy
Authors:
Abel Brokkelkamp,
Jaco ter Hoeve,
Isabel Postmes,
Sabrya E. van Heijst,
Louis Maduro,
Albert V. Davydov,
Sergiy Krylyuk,
Juan Rojo,
Sonia Conesa-Boj
Abstract:
The electronic properties of two-dimensional (2D) materials depend sensitively on the underlying atomic arrangement down to the monolayer level. Here we present a novel strategy for the determination of the band gap and complex dielectric function in 2D materials achieving a spatial resolution down to a few nanometers. This approach is based on machine learning techniques developed in particle phy…
▽ More
The electronic properties of two-dimensional (2D) materials depend sensitively on the underlying atomic arrangement down to the monolayer level. Here we present a novel strategy for the determination of the band gap and complex dielectric function in 2D materials achieving a spatial resolution down to a few nanometers. This approach is based on machine learning techniques developed in particle physics and makes possible the automated processing and interpretation of spectral images from electron energy-loss spectroscopy (EELS). Individual spectra are classified as a function of the thickness with $K$-means clustering and then used to train a deep-learning model of the zero-loss peak background. As a proof-of-concept we assess the band gap and dielectric function of InSe flakes and polytypic WS$_2$ nanoflowers, and correlate these electrical properties with the local thickness. Our flexible approach is generalizable to other nanostructured materials and to higher-dimensional spectroscopies, and is made available as a new release of the open-source EELSfitter framework.
△ Less
Submitted 25 February, 2022;
originally announced February 2022.
-
Bi2Se3 Growth on (001) GaAs Substrates for Terahertz Integrated Systems
Authors:
Yongchen Liu,
Wilder Acuna,
Huairuo Zhang,
Dai Q. Ho,
Ruiqi Hu,
Zhengtianye Wang,
Anderson Janotti,
Garnett Bryant,
Albert V. Davydov,
Joshua M. O. Zide,
Stephanie Law
Abstract:
Terahertz (THz) technologies have been of interest for many years due to the variety of applications including gas sensing, nonionizing imaging of biological systems, security and defense, etc. To date, scientists have used different classes of materials to perform different THz functions. However, to assemble an on-chip THz integrated system, we must understand how to integrate these different ma…
▽ More
Terahertz (THz) technologies have been of interest for many years due to the variety of applications including gas sensing, nonionizing imaging of biological systems, security and defense, etc. To date, scientists have used different classes of materials to perform different THz functions. However, to assemble an on-chip THz integrated system, we must understand how to integrate these different materials. Here, we explore the growth of Bi2Se3, a topological insulator (TI) material that could serve as a plasmonic waveguide in THz integrated devices, on technologically-important GaAs (001) substrates. We explore surface treatments and find that atomically smooth GaAs surface is critical to achieving high-quality Bi2Se3 films despite the relatively weak film/substrate interaction. Calculations indicate that the Bi2Se3/GaAs interface is likely selenium-terminated and shows no evidence of chemical bonding between the Bi2Se3 and the substrate. These results are a guide for integrating van der Waals materials with conventional semiconductor substrates and serve as the first steps toward achieving an on-chip THz integrated system.
△ Less
Submitted 29 August, 2022; v1 submitted 4 February, 2022;
originally announced February 2022.
-
Analysis of Raman and Ellipsometric Responses of Nb$_{x}$W$_{1-x}$Se$_{2}$ alloys
Authors:
Albert F. Rigosi,
Heather M. Hill,
Sergiy Krylyuk,
Nhan V. Nguyen,
Angela R. Hight Walker,
Albert V. Davydov,
David B. Newell
Abstract:
The growth of transition metal dichalcogenide (TMDC) alloys provides an opportunity to experimentally access information elucidating how optical properties change with gradual substitutions in the lattice compared with their pure compositions. In this work, we performed growths of alloyed crystals with stoichiometric compositions between pure forms of NbSe2 and WSe2, followed by an optical analysi…
▽ More
The growth of transition metal dichalcogenide (TMDC) alloys provides an opportunity to experimentally access information elucidating how optical properties change with gradual substitutions in the lattice compared with their pure compositions. In this work, we performed growths of alloyed crystals with stoichiometric compositions between pure forms of NbSe2 and WSe2, followed by an optical analysis of those alloys by utilizing Raman spectroscopy and spectroscopic ellipsometry.
△ Less
Submitted 24 December, 2021;
originally announced December 2021.
-
Crystalline Formations of NbN/4H-SiC Heterostructure Interfaces
Authors:
Michael B. Katz,
Chieh-I Liu,
Albert F. Rigosi,
Mattias Kruskopf,
Angela Hight Walker,
Randolph E. Elmquist,
Albert V. Davydov
Abstract:
Given the importance of incorporating various superconducting materials to device fabrication or substrate development, studying the interface for possible interactions is warranted. In this work, NbN films sputter-deposited on 4H-SiC were heat-treated at 1400 C and 1870 C and were examined with transmission electron microscopy to assess whether the interfacial interactions undergo temperature-dep…
▽ More
Given the importance of incorporating various superconducting materials to device fabrication or substrate development, studying the interface for possible interactions is warranted. In this work, NbN films sputter-deposited on 4H-SiC were heat-treated at 1400 C and 1870 C and were examined with transmission electron microscopy to assess whether the interfacial interactions undergo temperature-dependent behavior. We report the diffusion of NbN into the SiC substrate and the formation of NbN nanocrystallites therein during the 1400 C treatment. After the 1870 C treatment, tiered porosity and the formation of voids are observed, likely due to catalytic reactions between the two materials and accelerated by the stresses induced by the differences in the materials' coefficients of thermal expansion. Lastly, Raman spectroscopy is employed to gain an understanding of the interface lattices' optical responses.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
2D Metal Selenide-Silicon Steep Sub-Threshold Heterojunction Triodes with High On-Current Density
Authors:
**shui Miao,
Chloe Leblanc,
Xiwen Liu,
Baokun Song,
Huairuo Zhang,
Sergiy Krylyuk,
Albert V. Davydov,
Tyson Back,
Nicholas Glavin,
Deep Jariwala
Abstract:
Low power consumption in both static and dynamic modes of operation is a key requirement in modern, highly scaled nanoelectronics. Tunneling field-effect transistors (TFETs) that exploit direct band-to-band tunneling of charges and exhibit steep sub-threshold slope (SS) transfer characteristics are an attractive option in this regard. However, current generation of Si and III-V heterojunction base…
▽ More
Low power consumption in both static and dynamic modes of operation is a key requirement in modern, highly scaled nanoelectronics. Tunneling field-effect transistors (TFETs) that exploit direct band-to-band tunneling of charges and exhibit steep sub-threshold slope (SS) transfer characteristics are an attractive option in this regard. However, current generation of Si and III-V heterojunction based TFETs while suffer from low ON current density and ON/OFF current ratios for < 60 mV/dec operation. Semiconducting two-dimensional (2D) layers have recently renewed enthusiasm in novel device design for TFETs not only because of their atomically-thin bodies that favor superior electrostatic control but the same feature also favors higher ON current density and consequently high ON/OFF ratio. Here, we demonstrate gate-tunable heterojunction diodes (triodes) fabricated from InSe/Si 2D/3D van der Waals heterostructures, with a minimum subthreshold swing (SS) as low as 6.4 mV/dec and an SS average of 30 mV/dec over 4 decades of current. Further, the devices show a large current on/off ratio of approximately 10^6 and on-state current density of 0.3 uA/um at a drain bias of -1V. Our work opens new avenues for 2D semiconductors for 3D hetero-integration with Si to achieve ultra-low power logic devices.
△ Less
Submitted 11 November, 2021;
originally announced November 2021.
-
Distinguishing two-component anomalous Hall effect from topological Hall effect
Authors:
Lixuan Tai,
Bingqian Dai,
Jie Li,
Hanshen Huang,
Su Kong Chong,
Kin Wong,
Huairuo Zhang,
Peng Zhang,
Peng Deng,
Christopher Eckberg,
Gang Qiu,
Haoran He,
Di Wu,
Shijie Xu,
Albert V. Davydov,
Ruqian Wu,
Kang L. Wang
Abstract:
In transport, the topological Hall effect (THE) presents itself as non-monotonic features (or humps and dips) in the Hall signal and is widely interpreted as a sign of chiral spin textures, like magnetic skyrmions. However, when anomalous Hall effect (AHE) is also present, the co-existence of two AHEs could give rise to similar artifacts, making it difficult to distinguish between genuine THE with…
▽ More
In transport, the topological Hall effect (THE) presents itself as non-monotonic features (or humps and dips) in the Hall signal and is widely interpreted as a sign of chiral spin textures, like magnetic skyrmions. However, when anomalous Hall effect (AHE) is also present, the co-existence of two AHEs could give rise to similar artifacts, making it difficult to distinguish between genuine THE with AHE and two-component AHE. Here we confirm genuine THE with AHE by means of transport and magneto-optical Kerr effect (MOKE) microscopy, in which magnetic skyrmions are directly observed, and find that genuine THE occurs in the transition region of the AHE. In sharp contrast, the artifact "THE", or two-component AHE occurs well beyond the saturation of the "AHE component" (under the false assumption of THE+AHE). Furthermore, we distinguish artifact "THE" from genuine THE by three methods: 1. Minor loops, 2. Temperature dependence, 3. Gate dependence. Minor loops of genuine THE with AHE are always within the full loop, while minor loops of the artifact "THE" may reveal a single loop that cannot fit into the "AHE component". Besides, the temperature or gate dependence of the artifact "THE" may also be accompanied by a polarity change of the "AHE component", as the non-monotonic features vanish, while the temperature dependence of genuine THE with AHE reveals no such change. Our work may help future researchers to exercise cautions and use these methods to examine carefully in order to ascertain genuine THE.
△ Less
Submitted 15 August, 2022; v1 submitted 17 March, 2021;
originally announced March 2021.
-
Laser-assisted atom probe tomography of c-plane and m-plane InGaN test structures
Authors:
N. A. Sanford,
P. T. Blanchard,
M. D. Brubaker,
A. K. Rishinaramangalam,
Q. Zhang,
A. Roshko,
D. F. Feezell,
B. D. B. Klein,
A. V. Davydov
Abstract:
Laser-assisted atom probe tomography (APT) was used to measure the indium mole fraction x of c-plane, MOCVD-grown, GaN/In(x)Ga(1-x)N/GaN test structures and the results were compared with Rutherford backscattering analysis (RBS). Four sample types were examined with (RBS determined) x = 0.030, 0.034, 0.056, and 0.112. The respective In(x)Ga(1-x)N layer thicknesses were 330 nm, 327 nm, 360 nm, and…
▽ More
Laser-assisted atom probe tomography (APT) was used to measure the indium mole fraction x of c-plane, MOCVD-grown, GaN/In(x)Ga(1-x)N/GaN test structures and the results were compared with Rutherford backscattering analysis (RBS). Four sample types were examined with (RBS determined) x = 0.030, 0.034, 0.056, and 0.112. The respective In(x)Ga(1-x)N layer thicknesses were 330 nm, 327 nm, 360 nm, and 55 nm. APT data were collected at (fixed) laser pulse energy (PE) selected within the range of (2-1000) fJ. Sample temperatures were = 54 K. PE within (2-50) fJ yielded x values that agreed with RBS (within uncertainty) and were comparatively insensitive to region-of-interest (ROI) geometry and orientation. By contrast, approximate stoichiometry was only found in the GaN portions of the samples provided PE was within (5-20) fJ and the analyses were confined to cylindrical ROIs (of diameters =20 nm) that were coaxial with the specimen tips. m-plane oriented tips were derived from c-axis grown, core-shell, GaN/In(x)Ga(1-x)N nanorod heterostructures. Compositional analysis along [0 0 0 1] (transverse to the long axis of the tip), of these m-plane samples revealed a spatial asymmetry in charge-state ratio (CSR) and a corresponding asymmetry in the resultant tip shape along this direction; no asymmetry in CSR or tip shape was observed for analysis along [-1 2-1 0]. Simulations revealed that the electric field strength at the tip apex was dominated by the presence of a p-type inversion layer, which developed under typical tip-electrode bias conditions for the n-type do** levels considered. Finally, both c-plane and m-plane sample types showed depth-dependent variations in absolute ion counts that depended upon ROI placement.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
On-the-fly Closed-loop Autonomous Materials Discovery via Bayesian Active Learning
Authors:
A. Gilad Kusne,
Heshan Yu,
Changming Wu,
Huairuo Zhang,
Jason Hattrick-Simpers,
Brian DeCost,
Suchismita Sarker,
Corey Oses,
Cormac Toher,
Stefano Curtarolo,
Albert V. Davydov,
Ritesh Agarwal,
Leonid A. Bendersky,
Mo Li,
Apurva Mehta,
Ichiro Takeuchi
Abstract:
Active learning - the field of machine learning (ML) dedicated to optimal experiment design, has played a part in science as far back as the 18th century when Laplace used it to guide his discovery of celestial mechanics [1]. In this work we focus a closed-loop, active learning-driven autonomous system on another major challenge, the discovery of advanced materials against the exceedingly complex…
▽ More
Active learning - the field of machine learning (ML) dedicated to optimal experiment design, has played a part in science as far back as the 18th century when Laplace used it to guide his discovery of celestial mechanics [1]. In this work we focus a closed-loop, active learning-driven autonomous system on another major challenge, the discovery of advanced materials against the exceedingly complex synthesis-processes-structure-property landscape. We demonstrate autonomous research methodology (i.e. autonomous hypothesis definition and evaluation) that can place complex, advanced materials in reach, allowing scientists to fail smarter, learn faster, and spend less resources in their studies, while simultaneously improving trust in scientific results and machine learning tools. Additionally, this robot science enables science-over-the-network, reducing the economic impact of scientists being physically separated from their labs. We used the real-time closed-loop, autonomous system for materials exploration and optimization (CAMEO) at the synchrotron beamline to accelerate the fundamentally interconnected tasks of rapid phase map** and property optimization, with each cycle taking seconds to minutes, resulting in the discovery of a novel epitaxial nanocomposite phase-change memory material.
△ Less
Submitted 10 November, 2020; v1 submitted 10 June, 2020;
originally announced June 2020.
-
Localized Excitons in NbSe$_2$-MoSe$_2$ Heterostructures
Authors:
Jaydeep Joshi,
Tong Zhou,
Sergiy Krylyuk,
Albert V. Davydov,
Igor Zutic,
Patrick M. Vora
Abstract:
Neutral and charged excitons (trions) in atomically-thin materials offer important capabilities for photonics, from ultrafast photodetectors to highly-efficient light-emitting diodes and lasers. Recent studies of van der Waals (vdW) heterostructures comprised of dissimilar monolayer materials have uncovered a wealth of optical phenomena that are predominantly governed by interlayer interactions. H…
▽ More
Neutral and charged excitons (trions) in atomically-thin materials offer important capabilities for photonics, from ultrafast photodetectors to highly-efficient light-emitting diodes and lasers. Recent studies of van der Waals (vdW) heterostructures comprised of dissimilar monolayer materials have uncovered a wealth of optical phenomena that are predominantly governed by interlayer interactions. Here, we examine the optical properties in NbSe$_2$ - MoSe$_2$ vdW heterostructures, which provide an important model system to study metal-semiconductor interfaces, a common element in optoelectronics. Through low-temperature photoluminescence (PL) microscopy we discover a sharp emission feature, L1, that is localized at the NbSe$_2$-capped regions of MoSe$_2$. L1 is observed at energies below the commonly-studied MoSe$_2$ excitons and trions, and exhibits temperature- and power-dependent PL consistent with exciton localization in a confining potential. Remarkably, L1 is very robust not just in different samples, but also under a variety of fabrication processes. Using first-principles calculations we reveal that the confinement potential required for exciton localization naturally arises from the in-plane band bending due to the changes in the electron affinity between pristine MoSe$_2$ and NbSe$_2$ - MoSe$_2$ heterostructure. We discuss the implications of our studies for atomically-thin optoelectronics devices with atomically-sharp interfaces and tunable electronic structures.
△ Less
Submitted 6 April, 2020;
originally announced April 2020.
-
Valley Phenomena in the Candidate Phase Change Material WSe$_{2(1-x)}$Te$_{2x}$
Authors:
Sean M. Oliver,
Joshua Young,
Sergiy Krylyuk,
Thomas L. Reinecke,
Albert V. Davydov,
Patrick M. Vora
Abstract:
Alloyed transition metal dichalcogenides provide an opportunity for coupling band engineering with valleytronic phenomena in an atomically-thin platform. However, valley properties in alloys remain largely unexplored. We investigate the valley degree of freedom in monolayer alloys of the phase change candidate material WSe$_{2(1-x)}$Te$_{2x}$. Low temperature Raman measurements track the alloy-ind…
▽ More
Alloyed transition metal dichalcogenides provide an opportunity for coupling band engineering with valleytronic phenomena in an atomically-thin platform. However, valley properties in alloys remain largely unexplored. We investigate the valley degree of freedom in monolayer alloys of the phase change candidate material WSe$_{2(1-x)}$Te$_{2x}$. Low temperature Raman measurements track the alloy-induced transition from the semiconducting 1H phase of WSe$_2$ to the semimetallic 1T$_d$ phase of WTe$_2$. We correlate these observations with density functional theory calculations and identify new Raman modes from W-Te vibrations in the 1H alloy phase. Photoluminescence measurements show ultra-low energy emission features that highlight alloy disorder arising from the large W-Te bond lengths. Interestingly, valley polarization and coherence in alloys survive at high Te compositions and are more robust against temperature than in WSe$_2$. These findings illustrate the persistence of valley properties in alloys with highly dissimilar parent compounds and suggest band engineering can be utilized for valleytronic devices.
△ Less
Submitted 22 November, 2019; v1 submitted 1 August, 2019;
originally announced August 2019.
-
Electric field induced semiconductor-to-metal phase transition in vertical MoTe2 and Mo1-xWxTe2 devices
Authors:
Feng Zhang,
Sergiy Krylyuk,
Huairuo Zhang,
Cory A. Milligan,
Dmitry Y. Zemlyanov,
Leonid A. Bendersky,
Albert V. Davydov,
Joerg Appenzeller
Abstract:
Over the past years, transition metal dichalcogenides (TMDs) have attracted attention as potential building blocks for various electronic applications due to their atomically thin nature. An exciting development is the recent success in 'engineering' crystal phases of TMD compounds during the growth due to their polymorphic character. Here, we report an electric field induced reversible engineered…
▽ More
Over the past years, transition metal dichalcogenides (TMDs) have attracted attention as potential building blocks for various electronic applications due to their atomically thin nature. An exciting development is the recent success in 'engineering' crystal phases of TMD compounds during the growth due to their polymorphic character. Here, we report an electric field induced reversible engineered phase transition in vertical 2H-MoTe2 devices, a crucial experimental finding that enables electrical phase switching for these ultra-thin layered materials. Scanning tunneling microscopy (STM) was utilized to analyze the TMD crystalline structure after applying an electric field, and scanning tunneling spectroscopy (STS) was employed to map a semiconductor-to-metal phase transition on the nanoscale. In addition, direct confirmation of a phase transition from 2H semiconductor to a distorted 2H' metallic phase was obtained by scanning transmission electron microscopy (STEM). MoTe2 and Mo1-xWxTe2 alloy based vertical resistive random access memory (RRAM) cells were fabricated to demonstrate clear reproducible and controlled switching with programming voltages that are tunable by the layer thickness and that show a distinctly different trend for the binary compound if compared to the ternary materials.
△ Less
Submitted 12 September, 2017;
originally announced September 2017.
-
Strain Engineering a $4a\times\sqrt{3}a$ Charge Density Wave Phase in Transition Metal Dichalcogenide 1T-VSe$_2$
Authors:
Duming Zhang,
Jeonghoon Ha,
Hongwoo Baek,
Yang-Hao Chan,
Fabian D. Natterer,
Alline F. Myers,
Joshua D. Schumacher,
William G. Cullen,
Albert V. Davydov,
Young Kuk,
M. Y. Chou,
Nikolai B. Zhitenev,
Joseph A. Stroscio
Abstract:
We report a rectangular charge density wave (CDW) phase in strained 1T-VSe$_2$ thin films synthesized by molecular beam epitaxy on c-sapphire substrates. The observed CDW structure exhibits an unconventional rectangular 4a{\times}{\sqrt{3a}} periodicity, as opposed to the previously reported hexagonal $4a\times4a$ structure in bulk crystals and exfoliated thin layered samples. Tunneling spectrosco…
▽ More
We report a rectangular charge density wave (CDW) phase in strained 1T-VSe$_2$ thin films synthesized by molecular beam epitaxy on c-sapphire substrates. The observed CDW structure exhibits an unconventional rectangular 4a{\times}{\sqrt{3a}} periodicity, as opposed to the previously reported hexagonal $4a\times4a$ structure in bulk crystals and exfoliated thin layered samples. Tunneling spectroscopy shows a strong modulation of the local density of states of the same $4a\times\sqrt{3}a$ CDW periodicity and an energy gap of $2Δ_{CDW}=(9.1\pm0.1)$ meV. The CDW energy gap evolves into a full gap at temperatures below 500 mK, indicating a transition to an insulating phase at ultra-low temperatures. First-principles calculations confirm the stability of both $4a\times4a$ and $4a\times\sqrt{3}a$ structures arising from soft modes in the phonon dispersion. The unconventional structure becomes preferred in the presence of strain, in agreement with experimental findings.
△ Less
Submitted 20 July, 2017;
originally announced July 2017.
-
Evolution of Raman spectra in Mo$_{1-x}$W$_x$Te$_2$ alloys
Authors:
Sean M. Oliver,
Ryan Beams,
Sergiy Krylyuk,
Irina Kalish,
Arunima K. Singh,
Alina Bruma,
Francesca Tavazza,
Jaydeep Joshi,
Iris R. Stone,
Stephan J. Stranick,
Albert V. Davydov,
Patrick M. Vora
Abstract:
The structural polymorphism in transition metal dichalcogenides (TMDs) provides exciting opportunities for develo** advanced electronics. For example, MoTe$_2$ crystallizes in the 2H semiconducting phase at ambient temperature and pressure, but transitions into the 1T$^\prime$ semimetallic phase at high temperatures. Alloying MoTe$_2$ with WTe$_2$ reduces the energy barrier between these two pha…
▽ More
The structural polymorphism in transition metal dichalcogenides (TMDs) provides exciting opportunities for develo** advanced electronics. For example, MoTe$_2$ crystallizes in the 2H semiconducting phase at ambient temperature and pressure, but transitions into the 1T$^\prime$ semimetallic phase at high temperatures. Alloying MoTe$_2$ with WTe$_2$ reduces the energy barrier between these two phases, while also allowing access to the T$_d$ Weyl semimetal phase. The MoWTe$_2$ alloy system is therefore promising for develo** phase change memory technology. However, achieving this goal necessitates a detailed understanding of the phase composition in the MoTe$_2$-WTe$_2$ system. We combine polarization-resolved Raman spectroscopy with X-ray diffraction (XRD) and scanning transmission electron microscopy (STEM) to study MoWTe$_2$ alloys over the full compositional range x from 0 to 1. We identify Raman and XRD signatures characteristic of the 2H, 1T$^\prime$, and T$_d$ structural phases that agree with density-functional theory (DFT) calculations, and use them to identify phase fields in the MoTe$_2$-WTe$_2$ system, including single-phase 2H, 1T$^\prime$, and T$_d$ regions, as well as a two-phase 1T$^\prime$ + T$_d$ region. Disorder arising from compositional fluctuations in MoWTe$_2$ alloys breaks inversion and translational symmetry, leading to the activation of an infrared 1T$^\prime$-MoTe$_2$ mode and the enhancement of a double-resonance Raman process in 2H-MoWTe$_2$ alloys. Compositional fluctuations limit the phonon correlation length, which we estimate by fitting the observed asymmetric Raman lineshapes with a phonon confinement model. These observations reveal the important role of disorder in MoWTe$_2$ alloys, clarify the structural phase boundaries, and provide a foundation for future explorations of phase transitions and electronic phenomena in this system.
△ Less
Submitted 31 March, 2017;
originally announced March 2017.
-
MPInterfaces: A Materials Project based Python Tool for High-Throughput Computational Screening of Interfacial Systems
Authors:
Kiran Mathew,
Arunima K. Singh,
Joshua J. Gabriel,
Kamal Choudhary,
Susan B. Sinnott,
Albert V. Davydov,
Francesca Tavazza,
Richard G. Hennig
Abstract:
A Materials Project based open-source Python tool, MPInterfaces, has been developed to automate the high-throughput computational screening and study of interfacial systems. The framework encompasses creation and manipulation of interface structures for solid/solid hetero-structures, solid/implicit solvents systems, nanoparticle/ligands systems; and the creation of simple system-agnostic workflows…
▽ More
A Materials Project based open-source Python tool, MPInterfaces, has been developed to automate the high-throughput computational screening and study of interfacial systems. The framework encompasses creation and manipulation of interface structures for solid/solid hetero-structures, solid/implicit solvents systems, nanoparticle/ligands systems; and the creation of simple system-agnostic workflows for in depth computational analysis using density-functional theory or empirical energy models. The package leverages existing open-source high-throughput tools and extends their capabilities towards the understanding of interfacial systems. We describe the various algorithms and methods implemented in the package. Using several test cases, we demonstrate how the package enables high-throughput computational screening of advanced materials, directly contributing to the Materials Genome Initiative (MGI), which aims to accelerate the discovery, development, and deployment of new materials.
△ Less
Submitted 24 February, 2016;
originally announced February 2016.
-
Quasiparticle scattering from topological crystalline insulator SnTe (001) surface states
Authors:
Duming Zhang,
Hongwoo Baek,
Jeonghoon Ha,
Tong Zhang,
Jonathan E. Wyrick,
Albert V. Davydov,
Young Kuk,
Joseph A. Stroscio
Abstract:
Recently, the topological classification of electronic states has been extended to a new class of matter known as topological crystalline insulators. Similar to topological insulators, topological crystalline insulators also have spin-momentum locked surface states; but they only exist on specific crystal planes that are protected by crystal reflection symmetry. Here, we report an ultra-low temper…
▽ More
Recently, the topological classification of electronic states has been extended to a new class of matter known as topological crystalline insulators. Similar to topological insulators, topological crystalline insulators also have spin-momentum locked surface states; but they only exist on specific crystal planes that are protected by crystal reflection symmetry. Here, we report an ultra-low temperature scanning tunneling microscopy and spectroscopy study on topological crystalline insulator SnTe nanoplates grown by molecular beam epitaxy. We observed quasiparticle interference patterns on the SnTe (001) surface that can be interpreted in terms of electron scattering from the four Fermi pockets of the topological crystalline insulator surface states in the first surface Brillouin zone. A quantitative analysis of the energy dispersion of the quasiparticle interference intensity shows two high energy features related to the crossing point beyond the Lifshitz transition when the two neighboring low energy surface bands near the point merge. A comparison between the experimental and computed quasiparticle interference patterns reveals possible spin texture of the surface states.
△ Less
Submitted 5 May, 2014;
originally announced May 2014.
-
Fabrication of high quality GaN nanopillar arrays by dry and wet chemical etching
Authors:
Dipak Paramanik,
Abhishek Motayed,
Matthew King,
Jong-Yoon Ha,
Sergi Kryluk,
Albert V. Davydov,
Alec Talin
Abstract:
We study strain relaxation and surface damage of GaN nanopillar arrays fabricated using inductively coupled plasma (ICP) etching and post etch wet chemical treatment. We controlled the shape and surface damage of such nanopillar structures through selection of etching parameters. We compared different substrate temperatures and different chlorine-based etch chemistries to fabricate high quality Ga…
▽ More
We study strain relaxation and surface damage of GaN nanopillar arrays fabricated using inductively coupled plasma (ICP) etching and post etch wet chemical treatment. We controlled the shape and surface damage of such nanopillar structures through selection of etching parameters. We compared different substrate temperatures and different chlorine-based etch chemistries to fabricate high quality GaN nanopillars. Room temperature photoluminescence and Raman scattering measurements were carried to study the presence of surface defect and strain relaxation on these nanostructures, respectively. We found that wet KOH etching can remove the side wall damages caused by dry plasma etching, leading to better quality of GaN nanopillars arrays. The Si material underneath the GaN pillars was removed by KOH wet etching, leaving behind a fine Si pillar to support the GaN structure. Substantial strain relaxations were observed in these structures from room temperature Raman spectroscopy measurements. Room temperature Photoluminescence spectroscopy shows the presence of whispering gallery modes from these the nano disks structures.
△ Less
Submitted 5 April, 2014; v1 submitted 1 November, 2013;
originally announced November 2013.