Showing 1–40 of 40 results for author: Dalnoki-Veress, K

Wetting ridge dissipation at large deformations

Authors: Martin H. Essink, Stefan Karpitschka, Hamza K. Khattak, Kari Dalnoki-Veress, Harald van Brummelen, Jacco H. Snoeijer

Abstract: Liquid drops slide more slowly over soft, deformable substrates than over rigid solids. This phenomenon can be attributed to the viscoelastic dissipation induced by the moving wetting ridge, which inhibits a rapid motion, and is called "viscoelastic braking". Experiments on soft dynamical wetting have thus far been modelled using linear theory, assuming small deformations, which captures the essen… ▽ More Liquid drops slide more slowly over soft, deformable substrates than over rigid solids. This phenomenon can be attributed to the viscoelastic dissipation induced by the moving wetting ridge, which inhibits a rapid motion, and is called "viscoelastic braking". Experiments on soft dynamical wetting have thus far been modelled using linear theory, assuming small deformations, which captures the essential scaling laws. Quantitatively, however, some important disparities have suggested the importance of large deformations induced by the sliding drops. Here we compute the dissipation occurring below a contact line moving at constant velocity over a viscoelastic substrate, for the first time explicitly accounting for large deformations. It is found that linear theory becomes inaccurate especially for thin layers, and we discuss our findings in the light of recent experiments. △ Less

Submitted 9 February, 2024; originally announced February 2024.

Comments: 31 pages, 13 figures

Buckling instability in a chain of sticky bubbles

Authors: Carmen L. Lee, Kari Dalnoki-Veress

Abstract: A slender object undergoing an axial compression will buckle to alleviate the stress. Typically the morphology of the deformed object depends on the bending stiffness for solids, or the viscoelastic properties for liquid threads. We study a chain of uniform sticky air bubbles that rise due to buoyancy through an aqueous bath. A buckling instability of the bubble chain with a characteristic wavelen… ▽ More A slender object undergoing an axial compression will buckle to alleviate the stress. Typically the morphology of the deformed object depends on the bending stiffness for solids, or the viscoelastic properties for liquid threads. We study a chain of uniform sticky air bubbles that rise due to buoyancy through an aqueous bath. A buckling instability of the bubble chain with a characteristic wavelength is observed. If a chain of bubbles is produced faster than it is able to rise, the dominance of viscous drag over buoyancy results in a compressive stress that is alleviated by buckling the bubble chain. Using low Reynolds number hydrodynamics, we predict the critical buckling speed, the terminal speed of a buckled chain, and the geometry of the buckles. △ Less

Submitted 30 May, 2024; v1 submitted 26 November, 2023; originally announced November 2023.

Comments: 7 pages, 5 figures

Compression and fracture of ordered and disordered droplet rafts

Authors: Pablo Eduardo Illing, Jean-Christophe Ono-dit-Biot, Kari Dalnoki-Veress, Eric R. Weeks

Abstract: We simulate a two-dimensional array of droplets being compressed between two walls. The droplets are adhesive due to an attractive depletion force. As one wall moves toward the other, the droplet array is compressed and eventually induced to rearrange. The rearrangement occurs via a fracture, where depletion bonds are quickly broken between a subset of droplets. For monodisperse, hexagonally order… ▽ More We simulate a two-dimensional array of droplets being compressed between two walls. The droplets are adhesive due to an attractive depletion force. As one wall moves toward the other, the droplet array is compressed and eventually induced to rearrange. The rearrangement occurs via a fracture, where depletion bonds are quickly broken between a subset of droplets. For monodisperse, hexagonally ordered droplet arrays, this fracture is preceded by a maximum force exerted on the walls, which drops rapidly after the fracture occurs. In small droplet arrays a fracture is a single well-defined event, but for larger droplet arrays, competing fractures can be observed. These are fractures nucleated nearly simultaneously in different locations. Finally, we also study the compression of bidisperse droplet arrays. The addition of a second droplet size further disrupts fracture events, showing differences between ideal crystalline arrays, crystalline arrays with a small number of defects, and fully amorphous arrays. These results are in good agreement with previously published experiments. △ Less

Submitted 12 December, 2023; v1 submitted 27 June, 2023; originally announced June 2023.

Comments: 15 pages, 15 figures, Supplemental Movies are available, url in the bibliography

Journal ref: Phys. Rev. E 109, 014610 (2024)

Spreading of a 2D granular analogue of a liquid puddle: predicting the structure and dynamics through a continuum model

Authors: Johnathan Hoggarth, Jean-Christophe Ono-dit-Biot, Kari Dalnoki-Veress

Abstract: When sand flows out of a funnel onto a surface, a three dimensional pile that is stabilized by friction grows taller as it spreads. Here we investigate an idealized two dimensional analogue: spreading of a pile of monodisperse oil droplets at a boundary. In our system the droplets are buoyant, adhesive, and in contrast to sand, here friction is negligible. The buoyant droplets are added to the pil… ▽ More When sand flows out of a funnel onto a surface, a three dimensional pile that is stabilized by friction grows taller as it spreads. Here we investigate an idealized two dimensional analogue: spreading of a pile of monodisperse oil droplets at a boundary. In our system the droplets are buoyant, adhesive, and in contrast to sand, here friction is negligible. The buoyant droplets are added to the pile one-at-a-time. As the aggregate grows, it reaches a critical height and the 2D pile spreads out across the barrier. We find that, while granularity is important, the growth process is reminiscent of a continuum liquid. We define a ``granular capillary length'', analogous to the capillary length in liquids, which sets the critical height of the aggregate through a balance of buoyancy and adhesion. At a coarse-grained level, the granular capillary length is capable of describing both steady-state characteristics and dynamic properties of the system, while at a granular level repeated collapsing events play a critical role in the formation of the pile. △ Less

Submitted 18 December, 2022; originally announced December 2022.

Comments: 7 pages, 7 figures

Wettability alteration in thiolene-based polymer microfluidics: surface characterization and advanced fabrication techniques

Authors: Mahtab Masouminia, Kari Dalnoki-Veress, Benzhong Zhao

Abstract: Wettability plays a significant role in controlling multiphase flow in porous media for many industrial applications, including geologic carbon dioxide sequestration, enhanced oil recovery, and fuel cells. Microfluidics is a powerful tool to study the complexities of interfacial phenomena involved in multiphase flow in well-controlled geometries. Recently, the thiolene-based polymer called NOA81 e… ▽ More Wettability plays a significant role in controlling multiphase flow in porous media for many industrial applications, including geologic carbon dioxide sequestration, enhanced oil recovery, and fuel cells. Microfluidics is a powerful tool to study the complexities of interfacial phenomena involved in multiphase flow in well-controlled geometries. Recently, the thiolene-based polymer called NOA81 emerged as an ideal material in the fabrication of microfluidic devices, since it combines the versatility of conventional soft photolithography with a wide range of achievable wettability conditions. Specifically, the wettability of NOA81 can be continuously tuned through exposure to high-energy UV. Despite its growing popularity, the exact physical and chemical mechanisms behind the wettability alteration have not been fully characterized. Here, we apply different characterization techniques, including contact angle measurements, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM) to investigate the impact of high-energy UV on the chemical and physical properties of NOA81 surfaces. We find that high-energy UV exposure increases the oxygen-containing polar functional groups, which enhances the surface energy and hydrophilicity of NOA81. Additionally, our AFM measurements show that spin-coated NOA81 surfaces have a roughness less than a nanometer, which is further reduced after high-energy UV irradiation. Lastly, we advance the state-of-the-art of NOA81-based microfluidic systems by creating i) a 2D surface with controlled wettability gradient and ii) a 3D column packed with monodisperse NOA81 beads of controlled size and wettability. △ Less

Submitted 6 October, 2022; v1 submitted 4 October, 2022; originally announced October 2022.

Multiple droplets on a conical fiber: formation, motion, and droplet mergers

Authors: Carmen L. Lee, Tak Shing Chan, Andreas Carlson, Kari Dalnoki-Veress

Abstract: Small droplets on slender conical fibers spontaneously move along the fiber due to capillary action. The droplet motion depends on the geometry of the cone, the surface wettability, the surface tension, the viscosity, and the droplet size. Here we study with experiments and numerical simulations, the formation, spontaneous motion, and the eventual merger, of multiple droplets on slender conical fi… ▽ More Small droplets on slender conical fibers spontaneously move along the fiber due to capillary action. The droplet motion depends on the geometry of the cone, the surface wettability, the surface tension, the viscosity, and the droplet size. Here we study with experiments and numerical simulations, the formation, spontaneous motion, and the eventual merger, of multiple droplets on slender conical fibers as they interact with each other. The droplet size and their spacing on the fibre is controlled by the Plateau-Rayleigh instability after dip-coating the conical fiber. Once these droplets are formed on the fiber, they spontaneously start to move. Since droplets of different size move with different speeds, they effectively coarsen the droplet patterning by merging on the fiber. The droplet merging process affects locally the droplet speed and alters the spatiotemporal film deposition on the fiber. △ Less

Submitted 23 October, 2021; originally announced October 2021.

Comments: 7 pages, 7 figures

Writhing and hockling instabilities in twisted elastic fibers

Authors: Adam Fortais, Elsie Loukiantchenko, Kari Dalnoki-Veress

Abstract: The buckling and twisting of slender, elastic fibers is a deep and well-studied field. A slender elastic rod that is twisted with respect to a fixed end will spontaneously form a loop, or hockle, to relieve the torsional stress that builds. Further twisting results in the formation of plectonemes -- a helical excursion in the fiber that extends with additional twisting. Here we use an idealized, m… ▽ More The buckling and twisting of slender, elastic fibers is a deep and well-studied field. A slender elastic rod that is twisted with respect to a fixed end will spontaneously form a loop, or hockle, to relieve the torsional stress that builds. Further twisting results in the formation of plectonemes -- a helical excursion in the fiber that extends with additional twisting. Here we use an idealized, micron-scale experiment to investigate the energy stored, and subsequently released, by hockles and plectonemes as they are pulled apart, in analogy with force spectroscopy studies of DNA and protein folding. Hysteresis loops in the snap** and unsnap** inform the stored energy in the twisted fiber structures. △ Less

Submitted 31 July, 2021; originally announced August 2021.

Comments: 7 pages, 5 figures

Droplet Migration on Conical Fibers

Authors: Clementine Fournier, Carmen Lee, Rafael Schulman, Elie Raphael, Kari Dalnoki-Veress

Abstract: The spontaneous migration of droplets on conical fibers is studied experimentally by depositing silicone oil droplets onto conical glass fibers. Their motion is recorded using optical microscopy and analysed to extract the relevant geometrical parameters of the system. The speed of the droplet can be predicted as a function of geometry and the fluid properties using a simple theoretical model, whi… ▽ More The spontaneous migration of droplets on conical fibers is studied experimentally by depositing silicone oil droplets onto conical glass fibers. Their motion is recorded using optical microscopy and analysed to extract the relevant geometrical parameters of the system. The speed of the droplet can be predicted as a function of geometry and the fluid properties using a simple theoretical model, which balances viscous dissipation against the surface tension driving force. The experimental data are found to be in good agreement with the model. △ Less

Submitted 31 August, 2020; originally announced August 2020.

Mechanical properties of model colloidal mono-crystals

Authors: Jean-Christophe Ono-Dit-Biot, Pierre Soulard, Solomon Barkley, Eric Weeks, Thomas Salez, Élie Raphaël, Kari Dalnoki-Veress

Abstract: We investigate the elastic and yielding properties of two dimensional defect-free mono-crystals made of highly monodisperse droplets. Crystals are compressed between two parallel boundaries of which one acts as a force sensor. As the available space between boundaries is reduced, the crystal goes through successive row-reduction transitions. For small compression forces, the crystal responds ela… ▽ More We investigate the elastic and yielding properties of two dimensional defect-free mono-crystals made of highly monodisperse droplets. Crystals are compressed between two parallel boundaries of which one acts as a force sensor. As the available space between boundaries is reduced, the crystal goes through successive row-reduction transitions. For small compression forces, the crystal responds elastically until a critical force is reached and the assembly fractures in a single catastrophic global event. Correspondingly there is a peak in the force measurement associated with each row-reduction. The elastic properties of ideal mono-crystal samples are fully captured by a simple analytical model consisting of an assembly of individual capillary springs. The yielding properties of the crystal are captured with a minimal bond breaking model. △ Less

Submitted 2 July, 2020; originally announced July 2020.

Capillary Levelling of Immiscible Bilayer Films

Authors: Vincent Bertin, Carmen Lee, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: Flow in thin films is highly dependent on the boundary conditions. Here, we study the capillary levelling of thin bilayer films composed of two immiscible liquids. Specifically, a stepped polymer layer is placed atop another, flat polymer layer. The Laplace pressure gradient resulting from the curvature of the step induces flow in both layers, which dissipates the excess capillary energy stored in… ▽ More Flow in thin films is highly dependent on the boundary conditions. Here, we study the capillary levelling of thin bilayer films composed of two immiscible liquids. Specifically, a stepped polymer layer is placed atop another, flat polymer layer. The Laplace pressure gradient resulting from the curvature of the step induces flow in both layers, which dissipates the excess capillary energy stored in the stepped interface. The effect of different viscosity ratios between the bottom and top layers is investigated. We invoke a long-wave expansion of low-Reynolds-number hydrodynamics to model the energy dissipation due to the coupled viscous flows in the two layers. Good agreement is found between the experiments and the model. Analysis of the latter further reveals an interesting double crossover in time, from Poiseuille flow, to plug flow, and finally to Couette flow. The crossover time scales depend on the viscosity ratio between the two liquids, allowing for the dissipation mechanisms to be selected and finely tuned by varying this ratio. △ Less

Submitted 5 May, 2020; originally announced May 2020.

Journal ref: J. Fluid Mech. 911 (2021) A13

The emergence of local wrinkling or global buckling in thin freestanding bilayer films

Authors: John F. Niven, Gurkaran Chowdhry, James S. Sharp, Kari Dalnoki-Veress

Abstract: Periodic wrinkling of a rigid cap** layer on a deformable substrate provides a useful method for templating surface topography for a variety of novel applications. Many experiments have studied wrinkle formation during the compression of a rigid film on a relatively soft pre-strained elastic substrate, and most have focused on the regime where the substrate thickness can be considered semi-infin… ▽ More Periodic wrinkling of a rigid cap** layer on a deformable substrate provides a useful method for templating surface topography for a variety of novel applications. Many experiments have studied wrinkle formation during the compression of a rigid film on a relatively soft pre-strained elastic substrate, and most have focused on the regime where the substrate thickness can be considered semi-infinite relative to that of the film. As the relative thickness of the substrate is decreased, the bending stiffness of the film dominates, causing the bilayer to transition to either local wrinkling or a global buckling instability. In this work optical microscopy was used to study the critical parameters that determine the emergence of local wrinkling or global buckling of freestanding bilayer films consisting of a thin rigid polymer cap** layer on a pre-strained elastomeric substrate. The thickness ratio of the film and substrate as well as the pre-strain were controlled and used to create a buckling phase diagram which describes the behaviour of the system as the ratio of the thickness of the substrate is decreased. A simple force balance model was developed to understand the thickness and strain dependences of the wrinkling and buckling modes, with excellent quantitative agreement being obtained with experiments using only independently measured material parameters. △ Less

Submitted 18 April, 2020; originally announced April 2020.

Comments: 7 pages, 8 figures

Journal ref: Eur. Phys. J. E 43, 20 (2020)

Symmetrization of Thin Free-Standing Liquid Films via Capillary-Driven Flow

Authors: Vincent Bertin, John Niven, Howard A. Stone, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: We present experiments to study the relaxation of a nano-scale cylindrical perturbation at one of the two interfaces of a thin viscous free-standing polymeric film. Driven by capillarity, the film flows and evolves towards equilibrium by first symmetrizing the perturbation between the two interfaces, and eventually broadening the perturbation. A full-Stokes hydrodynamic model is presented which ac… ▽ More We present experiments to study the relaxation of a nano-scale cylindrical perturbation at one of the two interfaces of a thin viscous free-standing polymeric film. Driven by capillarity, the film flows and evolves towards equilibrium by first symmetrizing the perturbation between the two interfaces, and eventually broadening the perturbation. A full-Stokes hydrodynamic model is presented which accounts for both the vertical and lateral flows, and which highlights the symmetry in the system. The symmetrization time is found to depend on the membrane thickness, surface tension, and viscosity. △ Less

Submitted 17 December, 2019; originally announced December 2019.

Journal ref: Phys. Rev. Lett. 124, 184502 (2020)

Rearrangement of 2D aggregates of droplets under compression: signatures of the energy landscape from crystal to glass

Authors: Jean-Christophe Ono-dit-Biot, Pierre Soulard, Solomon Barkley, Eric R. Weeks, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: We study signatures of the energy landscape's evolution through the crystal-to-glass transition by compressing 2D finite aggregates of oil droplets. Droplets of two distinct sizes are used to compose small aggregates in an aqueous environment. Aggregates range from perfectly ordered monodisperse single crystals to disordered bidisperse glasses. The aggregates are compressed between two parallel bo… ▽ More We study signatures of the energy landscape's evolution through the crystal-to-glass transition by compressing 2D finite aggregates of oil droplets. Droplets of two distinct sizes are used to compose small aggregates in an aqueous environment. Aggregates range from perfectly ordered monodisperse single crystals to disordered bidisperse glasses. The aggregates are compressed between two parallel boundaries, with one acting as a force sensor. The compression force provides a signature of the aggregate composition and gives insight into the energy landscape. In particular, crystals dissipate all the stored energy through single catastrophic fracture events whereas the glassy aggregates break step-by-step. Remarkably, the yielding properties of the 2D aggregates are strongly impacted by even a small amount of disorder. △ Less

Submitted 19 July, 2019; originally announced July 2019.

Comments: 13 pages, 9 figures

Journal ref: Phys. Rev. Research 2, 023070 (2020)

Asymptotic regimes in elastohydrodynamic and stochastic leveling on a viscous film

Authors: Christian Pedersen, John Niven, Thomas Salez, Kari Dalnoki-Veress, Andreas Carlson

Abstract: An elastic sheet that deforms near a solid substrate in a viscous fluid is a situation relevant to various dynamical processes in biology, geophysics and engineering. Here, we study the relaxation dynamics of an elastic plate resting on a thin viscous film that is supported by a solid substrate. By combining scaling analysis, numerical simulations and experiments, we identify asymptotic regimes fo… ▽ More An elastic sheet that deforms near a solid substrate in a viscous fluid is a situation relevant to various dynamical processes in biology, geophysics and engineering. Here, we study the relaxation dynamics of an elastic plate resting on a thin viscous film that is supported by a solid substrate. By combining scaling analysis, numerical simulations and experiments, we identify asymptotic regimes for the elastohydrodynamic leveling of a surface perturbation of the form of a bump, when the flow is driven by either the elastic bending of the plate or thermal fluctuations. In both cases, two distinct regimes are identified when the bump height is either much larger or much smaller than the thickness of the pre-wetted viscous film. Our analysis reveals a distinct crossover between the similarity exponents with the ratio of the perturbation height to the film height. △ Less

Submitted 13 November, 2019; v1 submitted 27 February, 2019; originally announced February 2019.

Comments: 10 pages, 6 figures

Droplets capped with an elastic film can be round, elliptical, or nearly square

Authors: Rafael D. Schulman, Kari Dalnoki-Veress

Abstract: We present experiments which show that the partial wetting of droplets capped by taut elastic films is highly tunable. Adjusting the tension allows the contact angle and droplet morphology to be controlled. By exploiting these elastic boundaries, droplets can be made elliptical, with an adjustable aspect ratio, and can even be transformed into a nearly square shape. This system can be used to crea… ▽ More We present experiments which show that the partial wetting of droplets capped by taut elastic films is highly tunable. Adjusting the tension allows the contact angle and droplet morphology to be controlled. By exploiting these elastic boundaries, droplets can be made elliptical, with an adjustable aspect ratio, and can even be transformed into a nearly square shape. This system can be used to create tunable liquid lenses, and moreover, presents a unique approach to liquid patterning. △ Less

Submitted 21 December, 2018; originally announced December 2018.

Comments: 5 pages, 4 figures

Journal ref: Phys. Rev. Lett. 121, 248004, 2018

Hydroelastic wake on a thin elastic sheet floating on water

Authors: Jean-Christophe Ono-dit-Biot, Miguel Trejo, Elsie Loukiantcheko, Max Lauch, Elie Raphaël, Kari Dalnoki-Veress, Thomas Salez

Abstract: We investigate the hydroelastic wake created by a perturbation moving at constant speed along a thin elastic sheet floating at the surface of deep water. Using a high-resolution cross-correlation imaging technique, we characterize the waves as a function of the perturbation speed, for different sheet thicknesses. The general theoretical expression for the dispersion relation of hydroelastic waves… ▽ More We investigate the hydroelastic wake created by a perturbation moving at constant speed along a thin elastic sheet floating at the surface of deep water. Using a high-resolution cross-correlation imaging technique, we characterize the waves as a function of the perturbation speed, for different sheet thicknesses. The general theoretical expression for the dispersion relation of hydroelastic waves includes three components: gravity, bending and stretching. The bending modulus and the tension in the sheet are independently measured. Excellent agreement is found between the experimental data and the theoretical expression. △ Less

Submitted 19 June, 2018; originally announced June 2018.

Journal ref: Phys. Rev. Fluids 4, 014808 (2019)

Adhesion-induced fingering instabilities in thin elastic films under strain

Authors: Benjamin Davis-Purcell, Pierre Soulard, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: In this study, thin elastic films supported on a rigid substrate are brought into contact with a spherical glass indenter. Upon contact, adhesive fingers emerge at the periphery of the contact patch with a characteristic wavelength. Elastic films are also pre-strained along one axis before initiation of contact, causing the fingering pattern to become anisotropic and align with the axis along whic… ▽ More In this study, thin elastic films supported on a rigid substrate are brought into contact with a spherical glass indenter. Upon contact, adhesive fingers emerge at the periphery of the contact patch with a characteristic wavelength. Elastic films are also pre-strained along one axis before initiation of contact, causing the fingering pattern to become anisotropic and align with the axis along which the strain was applied. This transition from isotropic to anisotropic patterning is characterized quantitatively and a simple model is developed to understand the origin of the anisotropy. △ Less

Submitted 22 December, 2017; originally announced December 2017.

Comments: 7 pages, 8 figures

Journal ref: European Physical Journal E, 41 36 (2018)

Surface energy of strained amorphous solids

Authors: Rafael D. Schulman, Miguel Trejo, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: Surface stress and surface energy are fundamental quantities which characterize the interface between two materials. Although these quantities are identical for interfaces involving only fluids, the Shuttleworth effect demonstrates that this is not the case for most interfaces involving solids, since their surface energies change with strain. Crystalline materials are known to have strain dependen… ▽ More Surface stress and surface energy are fundamental quantities which characterize the interface between two materials. Although these quantities are identical for interfaces involving only fluids, the Shuttleworth effect demonstrates that this is not the case for most interfaces involving solids, since their surface energies change with strain. Crystalline materials are known to have strain dependent surface energies, but in amorphous materials, such as polymeric glasses and elastomers, the strain dependence is debated due to a dearth of direct measurements. Here, we utilize contact angle measurements on strained glassy and elastomeric solids to address this matter. We show conclusively that interfaces involving polymeric glasses exhibit strain dependent surface energies, and give strong evidence for the absence of such a dependence for incompressible elastomers. The results provide fundamental insight into our understanding of the interfaces of amorphous solids and their interaction with contacting liquids. △ Less

Submitted 14 January, 2018; v1 submitted 25 November, 2017; originally announced November 2017.

Comments: 8 pages, 4 figures

Journal ref: Nature Communications, 9 982 (2018)

Liquid dewetting under a thin elastic film

Authors: Rafael D. Schulman, John F. Niven, Michiel A. Hack, Christian DiMaria, Kari Dalnoki-Veress

Abstract: We study the dewetting of liquid films capped by a thin elastomeric layer. When the tension in the elastomer is isotropic, circular holes grow at a rate which decreases with increasing tension. The morphology of holes and rim stability can be controlled by changing the boundary conditions and tension in the cap** film. When the cap** film is prepared with a biaxial tension, holes form with a n… ▽ More We study the dewetting of liquid films capped by a thin elastomeric layer. When the tension in the elastomer is isotropic, circular holes grow at a rate which decreases with increasing tension. The morphology of holes and rim stability can be controlled by changing the boundary conditions and tension in the cap** film. When the cap** film is prepared with a biaxial tension, holes form with a non-circular shape elongated along the high tension axis. With suitable choice of elastic boundary conditions, samples can even be designed such that square holes appear. △ Less

Submitted 25 November, 2017; originally announced November 2017.

Comments: 9 pages, 8 figures

Adsorption-Induced Slip Inhibition for Polymer Melts on Ideal Substrates

Authors: Mark Ilton, Thomas Salez, Paul D. Fowler, Marco Rivetti, Mohammed Aly, Michael Benzaquen, Joshua D. McGraw, Elie Raphaël, Kari Dalnoki-Veress, Oliver Bäumchen

Abstract: Hydrodynamic slip of a liquid at a solid surface represents a fundamental phenomenon in fluid dynamics that governs liquid transport at small scales. For polymeric liquids, de Gennes predicted that the Navier boundary condition together with the theory of polymer dynamics imply extraordinarily large interfacial slip for entangled polymer melts on ideal surfaces; this Navier-de Gennes model was con… ▽ More Hydrodynamic slip of a liquid at a solid surface represents a fundamental phenomenon in fluid dynamics that governs liquid transport at small scales. For polymeric liquids, de Gennes predicted that the Navier boundary condition together with the theory of polymer dynamics imply extraordinarily large interfacial slip for entangled polymer melts on ideal surfaces; this Navier-de Gennes model was confirmed using dewetting experiments on ultra-smooth, low-energy substrates. Here, we use capillary leveling - surface tension driven flow of films with initially non-uniform thickness - of polymeric films on these same substrates. Measurement of the slip length from a robust one-parameter fit to a lubrication model is achieved. We show that at the lower shear rates involved in leveling experiments as compared to dewetting ones, the employed substrates can no longer be considered ideal. The data is instead consistent with physical adsorption of polymer chains at the solid/liquid interface. We extend the Navier-de Gennes description using one additional parameter, namely the density of physically adsorbed chains per unit surface. The resulting formulation is found to be in excellent agreement with the experimental observations. △ Less

Submitted 22 December, 2017; v1 submitted 10 August, 2017; originally announced August 2017.

Comments: 8 pages, 3 figures

Journal ref: Nature Communications, 9 1172 (2018)

Liquid droplets on a free-standing glassy membrane: deformation through the glass transition

Authors: Adam Fortais, Rafael D. Schulman, Kari Dalnoki-Veress

Abstract: In this study, micro-droplets are placed on thin, glassy, free-standing films where the Laplace pressure of the droplet deforms the free-standing film, creating a bulge. The film's tension is modulated by changing temperature continuously from well below the glass transition into the melt state of the film. The contact angle of the liquid droplet with the planar film as well as the angle of the bu… ▽ More In this study, micro-droplets are placed on thin, glassy, free-standing films where the Laplace pressure of the droplet deforms the free-standing film, creating a bulge. The film's tension is modulated by changing temperature continuously from well below the glass transition into the melt state of the film. The contact angle of the liquid droplet with the planar film as well as the angle of the bulge with the film are measured and found to be consistent with the contact angles predicted by a force balance at the contact line. △ Less

Submitted 22 June, 2017; originally announced June 2017.

Comments: 6 pages, 5 figures

Liquid droplets act as "compass needles" for the stresses in a deformable membrane

Authors: Rafael D. Schulman, René Ledesma-Alonso, Thomas Salez, Elie Raphaël, Kari Dalnoki-Veress

Abstract: We examine the shape of droplets atop deformable thin elastomeric films prepared with an anisotropic tension. As the droplets generate a deformation in the taut film through capillary forces, they assume a shape that is elongated along the high tension direction. By measuring the contact line profile, the tension in the membrane can be completely determined. Minimal theoretical arguments lead to p… ▽ More We examine the shape of droplets atop deformable thin elastomeric films prepared with an anisotropic tension. As the droplets generate a deformation in the taut film through capillary forces, they assume a shape that is elongated along the high tension direction. By measuring the contact line profile, the tension in the membrane can be completely determined. Minimal theoretical arguments lead to predictions for the droplet shape and membrane deformation that are in excellent agreement with the data. On the whole, the results demonstrate that droplets can be used as probes to map out the stress field in a membrane. △ Less

Submitted 2 March, 2017; originally announced March 2017.

Journal ref: Phys. Rev. Lett. 118, 198002 (2017)

Direct measurement of the critical pore size in a model membrane

Authors: Mark Ilton, Christian DiMaria, Kari Dalnoki-Veress

Abstract: We study pore nucleation in a model membrane system, a freestanding polymer film. Nucleated pores smaller than a critical size close, while pores larger than the critical size grow. Holes of varying size were purposefully prepared in liquid polymer films, and their evolution in time was monitored using optical and atomic force microscopy to extract a critical radius. The critical radius scales lin… ▽ More We study pore nucleation in a model membrane system, a freestanding polymer film. Nucleated pores smaller than a critical size close, while pores larger than the critical size grow. Holes of varying size were purposefully prepared in liquid polymer films, and their evolution in time was monitored using optical and atomic force microscopy to extract a critical radius. The critical radius scales linearly with film thickness for a homopolymer film. The results agree with a simple model which takes into account the energy cost due to surface area at the edge of the pore. The energy cost at the edge of the pore is experimentally varied by using a lamellar-forming diblock copolymer membrane. The underlying molecular architecture causes increased frustration at the pore edge resulting in an enhanced cost of pore formation. △ Less

Submitted 15 November, 2016; originally announced November 2016.

Comments: 5 pages, 5 figures

Controlling Marangoni induced instabilities in spin-cast polymer films: how to prepare uniform films

Authors: Paul D. Fowler, Celine Ruscher, Joshua D. McGraw, James A. Forrest, Kari Dalnoki-Veress

Abstract: In both research and industrial settings spin coating is extensively used to prepare highly uniform thin polymer films. However, under certain conditions, spin coating results in films with non-uniform surface morphologies. Although the spin coating process has been extensively studied, the origin of these morphologies is not fully understood and the formation of non-uniform spincast films remains… ▽ More In both research and industrial settings spin coating is extensively used to prepare highly uniform thin polymer films. However, under certain conditions, spin coating results in films with non-uniform surface morphologies. Although the spin coating process has been extensively studied, the origin of these morphologies is not fully understood and the formation of non-uniform spincast films remains a practical problem. Here we report on experiments demonstrating that the formation of surface instabilities during spin coating is dependent on temperature. Our results suggest that non-uniform spincast films form as a result of the Marangoni effect, which describes flow due to surface tension gradients. We find that both the wavelength and amplitude of the pattern increase with temperature. Finally, and most important from a practical viewpoint, the non-uniformities in the film thickness can be entirely avoided simply by lowering the spin coating temperature. △ Less

Submitted 1 September, 2016; originally announced September 2016.

Comments: 8 pages, 6 figures. electronic supplementary material: 3 pages, 4 figures

Journal ref: Eur. Phys. J. E (2016) 39: 90

Elastocapillary bending of microfibers around liquid droplets

Authors: Rafael D. Schulman, Amir Porat, Kathleen Charlesworth, Adam Fortais, Thomas Salez, Elie Raphaël, Kari Dalnoki-Veress

Abstract: We report on the elastocapillary deformation of flexible microfibers in contact with liquid droplets. A fiber is observed to bend more as the size of the contacting droplet is increased. At a critical droplet size, proportional to the bending elastocapillary length, the fiber is seen to spontaneously wind around the droplet. To rationalize these observations, we invoke a minimal model based on ela… ▽ More We report on the elastocapillary deformation of flexible microfibers in contact with liquid droplets. A fiber is observed to bend more as the size of the contacting droplet is increased. At a critical droplet size, proportional to the bending elastocapillary length, the fiber is seen to spontaneously wind around the droplet. To rationalize these observations, we invoke a minimal model based on elastic beam theory, and find agreement with experimental data. Further energetic considerations provide a consistent prediction for the winding criterion. △ Less

Submitted 20 July, 2016; originally announced July 2016.

Comments: 9 pages, 8 figures

Journal ref: Soft Matter, 13 720 (2017)

Capillary levelling of free-standing liquid nanofilms

Authors: Mark Ilton, Miles M. P. Couchman, Cedric Gerbelot, Michael Benzaquen, Paul D. Fowler, Howard A. Stone, Elie Raphaël, Kari Dalnoki-Veress, Thomas Salez

Abstract: We report on the capillary-driven levelling of a topographical perturbation at the surface of a free-standing liquid nanofilm. The width of a stepped surface profile is found to evolve as the square root of time. The hydrodynamic model is in excellent agreement with the experimental data. In addition to exhibiting an analogy with diffusive processes, this novel system serves as a precise nanoprobe… ▽ More We report on the capillary-driven levelling of a topographical perturbation at the surface of a free-standing liquid nanofilm. The width of a stepped surface profile is found to evolve as the square root of time. The hydrodynamic model is in excellent agreement with the experimental data. In addition to exhibiting an analogy with diffusive processes, this novel system serves as a precise nanoprobe for the rheology of liquids at interfaces in a configuration that avoids substrate effects. △ Less

Submitted 5 September, 2016; v1 submitted 17 February, 2016; originally announced February 2016.

Journal ref: Phys. Rev. Lett. 117, 167801 (2016)

Self-amplification of solid friction in interleaved assemblies

Authors: Hector Alarcon, Thomas Salez, Christophe Poulard, Jean-Francis Bloch, Elie Raphael, Kari Dalnoki-Veress, Frederic Restagno

Abstract: It is nearly impossible to separate two interleaved phonebooks when held by their spines. A full understanding of this astonishing demonstration of solid friction in complex assemblies has remained elusive. In this Letter, we report on experiments with controlled booklets and show that the force required increases sharply with the number of sheets. A model captures the effect of the number of shee… ▽ More It is nearly impossible to separate two interleaved phonebooks when held by their spines. A full understanding of this astonishing demonstration of solid friction in complex assemblies has remained elusive. In this Letter, we report on experiments with controlled booklets and show that the force required increases sharply with the number of sheets. A model captures the effect of the number of sheets, their thickness and the overlap** distance. Furthermore, the data collapse onto a self-similar master curve with one dimensionless amplification parameter. In addition to solving a long-standing familiar enigma, this model system provides a framework with which one can accurately measure friction forces and coefficients at low loads, and that has relevance to complex assemblies from the macro to the nanoscale. △ Less

Submitted 17 December, 2015; v1 submitted 13 August, 2015; originally announced August 2015.

Comments: in Physical Review Letters (2015)

Journal ref: Phys. Rev. Lett. 116, 015502 (2016)

Snap-off production of monodisperse droplets

Authors: Solomon Barkley, Eric R. Weeks, Kari Dalnoki-Veress

Abstract: We introduce a novel technique to produce monodisperse droplets through the snap-off mechanism. The methodology is simple, versatile, and requires no specialized or expensive components. The droplets produced have polydispersity <1% and can be as small as 2.5 $μ$m radius. A convenient feature is that the droplet size is constant over a 100-fold change in flow rate, while at higher flows the drople… ▽ More We introduce a novel technique to produce monodisperse droplets through the snap-off mechanism. The methodology is simple, versatile, and requires no specialized or expensive components. The droplets produced have polydispersity <1% and can be as small as 2.5 $μ$m radius. A convenient feature is that the droplet size is constant over a 100-fold change in flow rate, while at higher flows the droplet size can be continuously adjusted. △ Less

Submitted 13 August, 2015; originally announced August 2015.

Comments: to be published in Eur. Phys. J. E as a "Tips and Tricks" article

Journal ref: Eur. Phys. J. E 38, 138 (2015)

Symmetry Plays a Key Role in the Erasing of Patterned Surface Features

Authors: Michael Benzaquen, Mark Ilton, Michael V. Massa, Thomas Salez, Paul Fowler, Elie Raphaël, Kari Dalnoki-Veress

Abstract: We report on how the relaxation of patterns prepared on a thin film can be controlled by manipu- lating the symmetry of the initial shape. The validity of a lubrication theory for the capillary-driven relaxation of surface profiles is verified by atomic force microscopy measurements, performed on films that were patterned using focused laser spike annealing. In particular, we observe that the shap… ▽ More We report on how the relaxation of patterns prepared on a thin film can be controlled by manipu- lating the symmetry of the initial shape. The validity of a lubrication theory for the capillary-driven relaxation of surface profiles is verified by atomic force microscopy measurements, performed on films that were patterned using focused laser spike annealing. In particular, we observe that the shape of the surface profile at late times is entirely determined by the initial symmetry of the perturba- tion, in agreement with the theory. Moreover, in this regime the perturbation amplitude relaxes as a power-law in time, with an exponent that is also related to the initial symmetry. The results have relevance in the dynamical control of topographic perturbations for nanolithography and high density memory storage. △ Less

Submitted 30 March, 2015; originally announced March 2015.

Journal ref: Applied Physics Letters, 107 053103 (2015)

Cooperative Strings and Glassy Interfaces

Authors: Thomas Salez, Justin Salez, Kari Dalnoki-Veress, Elie Raphaël, James A. Forrest

Abstract: We introduce a minimal theory of glass formation based on the ideas of molecular crowding and resultant string-like cooperative rearrangement, and address the effects of free interfaces. In the bulk case, we obtain a scaling expression for the number of particles taking part in cooperative strings, and we recover the Adam-Gibbs description of glassy dynamics. Then, by including thermal dilatation,… ▽ More We introduce a minimal theory of glass formation based on the ideas of molecular crowding and resultant string-like cooperative rearrangement, and address the effects of free interfaces. In the bulk case, we obtain a scaling expression for the number of particles taking part in cooperative strings, and we recover the Adam-Gibbs description of glassy dynamics. Then, by including thermal dilatation, the Vogel-Fulcher-Tammann relation is derived. Moreover, the random and string-like characters of the cooperative rearrangement allow us to predict a temperature-dependent expression for the cooperative length $ξ$ of bulk relaxation. Finally, we explore the influence of sample boundaries when the system size becomes comparable to $ξ$. The theory is in agreement with measurements of the glass-transition temperature of thin polymer films, and allows to quantify the temperature-dependent thickness $h_{\textrm{m}}$ of the interfacial mobile layer. △ Less

Submitted 11 June, 2015; v1 submitted 6 February, 2015; originally announced February 2015.

Journal ref: Proceedings of the National Academy of Sciences of the USA, 112 8227 (2015)

Influence of Slip on the Plateau-Rayleigh Instability on a Fibre

Authors: Sabrina Haefner, Michael Benzaquen, Oliver Baümchen, Thomas Salez, Robert Peters, Joshua D. McGraw, Karin Jacobs, Elie Raphaël, Kari Dalnoki-Veress

Abstract: The Plateau-Rayleigh instability of a liquid column underlies a variety of fascinating phenomena that can be observed in everyday life. In contrast to the case of a free liquid cylinder, describing the evolution of a liquid layer on a solid fibre requires consideration of the solid-liquid interface. In this article, we revisit the Plateau-Rayleigh Instability of a liquid coating a fibre by varying… ▽ More The Plateau-Rayleigh instability of a liquid column underlies a variety of fascinating phenomena that can be observed in everyday life. In contrast to the case of a free liquid cylinder, describing the evolution of a liquid layer on a solid fibre requires consideration of the solid-liquid interface. In this article, we revisit the Plateau-Rayleigh Instability of a liquid coating a fibre by varying the hydrodynamic boundary condition at the fibre-liquid interface, from no-slip to slip. While the wavelength is not sensitive to the solid-liquid interface, we find that the growth rate of the undulations strongly depends on the hydrodynamic boundary condition. The experiments are in excellent agreement with a new thin film theory incorporating slip, thus providing an original, quantitative and robust tool to measure slip lengths. △ Less

Submitted 24 May, 2015; v1 submitted 9 January, 2015; originally announced January 2015.

Journal ref: Nature Communications, 6 7409 (2015)

Approach to universal self-similar attractor for the levelling of thin liquid films

Authors: Michael Benzaquen, Paul Fowler, Laetitia Jubin, Thomas Salez, Kari Dalnoki-Veress, Elie Raphaël

Abstract: We compare the capillary levelling of a random surface perturbation on a thin polystyrene film with a theoretical study on the two-dimensional capillary-driven thin film equation. Using atomic force microscopy, we follow the time evolution of samples prepared with different initial perturbations of the free surface. In particular, we show that the surface profiles present long term self-similarity… ▽ More We compare the capillary levelling of a random surface perturbation on a thin polystyrene film with a theoretical study on the two-dimensional capillary-driven thin film equation. Using atomic force microscopy, we follow the time evolution of samples prepared with different initial perturbations of the free surface. In particular, we show that the surface profiles present long term self-similarity, and furthermore, that they converge to a universal self-similar attractor that only depends on the volume of the perturbation, consistent with the theory. Finally, we look at the convergence time for the different samples and find very good agreement with the analytical predictions. △ Less

Submitted 22 August, 2014; v1 submitted 8 July, 2014; originally announced July 2014.

Comments: 7 pages, 5 figures

Journal ref: Soft Matter, 10 8608 (2014)

A direct quantitative measure of surface mobility in a glassy polymer

Authors: Yu Chai, Thomas Salez, Joshua D. McGraw, Michael Benzaquen, Kari Dalnoki-Veress, Elie Raphaël, James A. Forrest

Abstract: Thin polymer films have striking dynamical properties that differ from their bulk counterparts. With the simple geometry of a stepped polymer film on a substrate, we probe mobility above and below the glass transition temperature $T_{\textrm{g}}$. Above $T_{\textrm{g}}$ the entire film flows, while below $T_{\textrm{g}}$ only the near surface region responds to the excess interfacial energy. An an… ▽ More Thin polymer films have striking dynamical properties that differ from their bulk counterparts. With the simple geometry of a stepped polymer film on a substrate, we probe mobility above and below the glass transition temperature $T_{\textrm{g}}$. Above $T_{\textrm{g}}$ the entire film flows, while below $T_{\textrm{g}}$ only the near surface region responds to the excess interfacial energy. An analytical thin film model for flow limited to the free surface region shows excellent agreement with sub-$T_{\textrm{g}}$ data. The system transitions from whole film flow to surface localized flow over a narrow temperature region near the bulk $T_{\textrm{g}}$. The experiments and model provide a measure of surface mobility in a sample geometry where confinement and substrate effects are negligible. This fine control of the glassy rheology is of key interest to nanolithography among numerous other applications. △ Less

Submitted 2 August, 2015; v1 submitted 27 February, 2014; originally announced February 2014.

Journal ref: Science, 343 994 (2014)

Capillary levelling of a cylindrical hole in a viscous film

Authors: Matilda Backholm, Michael Benzaquen, Thomas Salez, Elie Raphaël, Kari Dalnoki-Veress

Abstract: The capillary levelling of cylindrical holes in viscous polystyrene films was studied using atomic force microscopy as well as quantitative analytical scaling arguments based on thin film theory and self-similarity. The relaxation of the holes was shown to consist of two different time regimes: an early regime where opposing sides of the hole do not interact, and a late regime where the hole is fi… ▽ More The capillary levelling of cylindrical holes in viscous polystyrene films was studied using atomic force microscopy as well as quantitative analytical scaling arguments based on thin film theory and self-similarity. The relaxation of the holes was shown to consist of two different time regimes: an early regime where opposing sides of the hole do not interact, and a late regime where the hole is filling up. For the latter, the self-similar asymptotic profile was derived analytically and shown to be in excellent agreement with experimental data. Finally, a binary system of two holes in close proximity was investigated where the individual holes fill up at early times and coalesce at longer times. △ Less

Submitted 23 January, 2014; originally announced January 2014.

Comments: 10 pages, 9 figures, accepted for publication in Soft Matter

Journal ref: Soft Matter, 10 2550 (2014)

Relaxation and Intermediate Asymptotics of a Rectangular Trench in a Viscous Film

Authors: Oliver Bäumchen, Michael Benzaquen, Thomas Salez, Joshua D. McGraw, Matilda Backholm, Paul Fowler, Elie Raphaël, Kari Dalnoki-Veress

Abstract: The surface of a thin liquid film with nonconstant curvature flattens as a result of capillary forces. While this leveling is driven by local curvature gradients, the global boundary conditions greatly influence the dynamics. Here, we study the evolution of rectangular trenches in a polystyrene nanofilm. Initially, when the two sides of a trench are well separated, the asymmetric boundary conditio… ▽ More The surface of a thin liquid film with nonconstant curvature flattens as a result of capillary forces. While this leveling is driven by local curvature gradients, the global boundary conditions greatly influence the dynamics. Here, we study the evolution of rectangular trenches in a polystyrene nanofilm. Initially, when the two sides of a trench are well separated, the asymmetric boundary condition given by the step height controls the dynamics. In this case, the evolution results from the leveling of two noninteracting steps. As the steps broaden further and start to interact, the global symmetric boundary condition alters the leveling dynamics. We report on full agreement between theory and experiments for: the capillary-driven flow and resulting time dependent height profiles; a crossover in the power-law dependence of the viscous energy dissipation as a function of time as the trench evolution transitions from two noninteracting to interacting steps; and the convergence of the profiles to a universal self-similar attractor that is given by the Green's function of the linear operator describing the dimensionless linearized thin film equation. △ Less

Submitted 10 September, 2013; originally announced September 2013.

Comments: Accepted for publication in Physical Review E

Journal ref: Physical Review E, 88 035001 (2013)

Capillary leveling of stepped films with inhomogeneous molecular mobility

Authors: Joshua D. McGraw, Thomas Salez, Oliver Bäumchen, Elie Raphaël, Kari Dalnoki-Veress

Abstract: A homogeneous thin polymer film with a stepped height profile levels due to the presence of Laplace pressure gradients. Here we report on studies of polymeric samples with precisely controlled, spatially inhomogeneous molecular weight distributions. The viscosity of a polymer melt strongly depends on the chain length distribution; thus, we learn about thin-film hydrodynamics with viscosity gradien… ▽ More A homogeneous thin polymer film with a stepped height profile levels due to the presence of Laplace pressure gradients. Here we report on studies of polymeric samples with precisely controlled, spatially inhomogeneous molecular weight distributions. The viscosity of a polymer melt strongly depends on the chain length distribution; thus, we learn about thin-film hydrodynamics with viscosity gradients. These gradients are achieved by stacking two films with different molecular weights atop one another. After a sufficient time these samples can be well described as having one dimensional viscosity gradients in the plane of the film, with a uniform viscosity normal to the film. We develop a hydrodynamic model that accurately predicts the shape of the experimentally observed self-similar profiles. The model allows for the extraction of a capillary velocity, the ratio of the surface tension and the viscosity, in the system. The results are in excellent agreement with capillary velocity measurements of uniform mono- and bi-disperse stepped films and are consistent with bulk polymer rheology. △ Less

Submitted 14 June, 2013; originally announced June 2013.

Comments: Accepted for publication in Soft Matter, Themed Issue on "The Geometry and Topology of Soft Materials"

Journal ref: Soft Matter, 9 8297 (2013)

Numerical solutions of thin film equations for polymer flows

Authors: Thomas Salez, Joshua D. McGraw, Sara L. Cormier, Oliver Bäumchen, Kari Dalnoki-Veress, Élie Raphaël

Abstract: We report on the numerical implementation of thin film equations that describe the capillary-driven evolution of viscous films, in two-dimensional configurations. After recalling the general forms and features of these equations, we focus on two particular cases inspired by experiments: the leveling of a step at the free surface of a polymer film, and the leveling of a polymer droplet over an iden… ▽ More We report on the numerical implementation of thin film equations that describe the capillary-driven evolution of viscous films, in two-dimensional configurations. After recalling the general forms and features of these equations, we focus on two particular cases inspired by experiments: the leveling of a step at the free surface of a polymer film, and the leveling of a polymer droplet over an identical film. In each case, we first discuss the long-term self-similar regime reached by the numerical solution before comparing it to the experimental profile. The agreement between theory and experiment is excellent, thus providing a versatile probe for nanorheology of viscous liquids in thin film geometries. △ Less

Submitted 21 August, 2013; v1 submitted 31 October, 2012; originally announced October 2012.

Comments: Accepted for publication in European Physical Journal E

Journal ref: European Physical Journal E, 35 114 (2012)

Capillary-driven flow induced by a stepped perturbation atop a viscous film

Authors: Thomas Salez, Joshua D. McGraw, Oliver Bäumchen, Kari Dalnoki-Veress, Élie Raphaël

Abstract: Thin viscous liquid films driven by capillarity are well described in the lubrication theory through the thin film equation. In this article, we present an analytical solution of this equation for a particular initial profile: a stepped perturbation. This initial condition allows a linearization of the problem making it amenable to Fourier analysis. The solution is obtained and characterized. As f… ▽ More Thin viscous liquid films driven by capillarity are well described in the lubrication theory through the thin film equation. In this article, we present an analytical solution of this equation for a particular initial profile: a stepped perturbation. This initial condition allows a linearization of the problem making it amenable to Fourier analysis. The solution is obtained and characterized. As for a temperature step in the heat equation, self-similarity of the first kind of the full evolution is demonstrated and a long-term expression for the excess free energy is derived. In addition, hydrodynamical fields are described. The solution is then compared to experimental profiles from a model system: a polystyrene nanostep above the glass transition temperature which flows due to capillarity. The excellent agreement enables a precise measurement of the capillary velocity for this polymeric liquid, without involving any numerical simulation. More generally, as these results hold for any viscous system driven by capillarity, the present solution may provide a useful tool in hydrodynamics of thin viscous films. △ Less

Submitted 22 October, 2012; originally announced October 2012.

Comments: Accepted for publication in Physics of Fluids

Journal ref: Physics of Fluids, 24 102111 (2012)

Beyond Tanner's Law: Crossover between Spreading Regimes of a Viscous Droplet on an Identical Film

Authors: Sara L. Cormier, Joshua D. McGraw, Thomas Salez, Elie Raphael, Kari Dalnoki-Veress

Abstract: We present results on the leveling of polymer microdroplets on thin films prepared from the same material. In particular, we explore the crossover from a droplet spreading on an infinitesimally thin film (Tanner's law regime) to that of a droplet leveling on a film thicker than the droplet itself. In both regimes, the droplet's excess surface area decreases towards the equilibrium configuration of… ▽ More We present results on the leveling of polymer microdroplets on thin films prepared from the same material. In particular, we explore the crossover from a droplet spreading on an infinitesimally thin film (Tanner's law regime) to that of a droplet leveling on a film thicker than the droplet itself. In both regimes, the droplet's excess surface area decreases towards the equilibrium configuration of a flat liquid film, but with a different power law in time. Additionally, the characteristic leveling time depends on molecular properties, the size of the droplet, and the thickness of the underlying film. Flow within the film makes this system fundamentally different from a droplet spreading on a solid surface. We thus develop a theoretical model based on thin film hydrodynamics that quantitatively describes the observed crossover between the two leveling regimes. △ Less

Submitted 22 September, 2012; originally announced September 2012.

Comments: accepted for publication in Physical Review Letters

Journal ref: Physical Review Letters, 109 154501 (2012)

Self-Similarity and Energy Dissipation in Stepped Polymer Films

Authors: Joshua D. McGraw, Thomas Salez, Oliver Bäumchen, Elie Raphaël, Kari Dalnoki-Veress

Abstract: The surface of a thin liquid film with nonconstant curvature is unstable, as the Laplace pressure drives a flow mediated by viscosity. We present the results of experiments on one of the simplest variable curvature surfaces: a stepped polymer film. Height profiles are measured as a function of time for a variety of molecular weights. The evolution of the profiles is shown to be self-similar. This… ▽ More The surface of a thin liquid film with nonconstant curvature is unstable, as the Laplace pressure drives a flow mediated by viscosity. We present the results of experiments on one of the simplest variable curvature surfaces: a stepped polymer film. Height profiles are measured as a function of time for a variety of molecular weights. The evolution of the profiles is shown to be self-similar. This self-similarity offers a precise measurement of the capillary velocity by comparison with numerical solutions of the thin film equation. We also derive a master expression for the time dependence of the excess free energy as a function of the material properties and film geometry. The experiment and theory are in excellent agreement and indicate the effectiveness of stepped polymer films to elucidate nanoscale rheological properties. △ Less

Submitted 6 September, 2012; originally announced September 2012.

Comments: 5 pages, 4 figures, article accepted for publication in Physical Review Letters

Journal ref: Physical Review Letters, 109 128303 (2012)