Showing 1–41 of 41 results for author: Dabo, I

Order evolution from a high-entropy matrix: understanding and predicting paths to low temperature equilibrium

Authors: Saeed S. I. Almishal, Leixin Miao, Yueze Tan, George N. Kotsonis, Jacob T. Sivak, Nasim Alem, Long-Qing Chen, Vincent H. Crespi, Ismaila Dabo, Christina M. Rost, Susan B. Sinnott, Jon-Paul Maria

Abstract: Interest in high-entropy inorganic compounds originates from their ability to stabilize cations and anions in local environments that rarely occur at standard temperature and pressure. This leads to new crystalline phases in many-cation formulations with structures and properties that depart from conventional trends. The highest-entropy homogeneous and random solid-solution is a parent structure f… ▽ More Interest in high-entropy inorganic compounds originates from their ability to stabilize cations and anions in local environments that rarely occur at standard temperature and pressure. This leads to new crystalline phases in many-cation formulations with structures and properties that depart from conventional trends. The highest-entropy homogeneous and random solid-solution is a parent structure from which a continuum of lower-entropy offspring can originate by adopting chemical and/or structural order. This report demonstrates how synthesis conditions, thermal history, and elastic and chemical boundary conditions conspire to regulate this process in Mg0.2Co0.2Ni0.2Cu0.2Zn0.2O, during which coherent CuO nano-tweeds and spinel nano-cuboids evolve. We do so by combining structured synthesis routes, atomic-resolution microscopy and spectroscopy, density functional theory, and a phase field modeling framework that accurately predicts the emergent structure and local chemistry. This establishes a framework to appreciate, understand, and predict the macrostate spectrum available to a high-entropy system that is critical to rationalize property engineering opportunities. △ Less

Submitted 24 April, 2024; originally announced April 2024.

Cluster expansion by transfer learning for phase stability predictions

Authors: A. Dana, L. Mu, S. Gelin, S. B. Sinnott, I. Dabo

Abstract: Recent progress towards universal machine-learned interatomic potentials holds considerable promise for materials discovery. Yet the accuracy of these potentials for predicting phase stability may still be limited. In contrast, cluster expansions provide accurate phase stability predictions but are computationally demanding to parameterize from first principles, especially for structures of low di… ▽ More Recent progress towards universal machine-learned interatomic potentials holds considerable promise for materials discovery. Yet the accuracy of these potentials for predicting phase stability may still be limited. In contrast, cluster expansions provide accurate phase stability predictions but are computationally demanding to parameterize from first principles, especially for structures of low dimension or with a large number of components, such as interfaces or multimetal catalysts. We overcome this trade-off via transfer learning. Using Bayesian inference, we incorporate prior statistical knowledge from machine-learned and physics-based potentials, enabling us to sample the most informative configurations and to efficiently fit first-principles cluster expansions. This algorithm is tested on Pt:Ni, showing robust convergence of the mixing energies as a function of sample size with reduced statistical fluctuations. △ Less

Submitted 1 May, 2024; v1 submitted 10 November, 2023; originally announced November 2023.

Strain fluctuations unlock ferroelectricity in wurtzites

Authors: Steven M. Baksa, Simon Gelin, Seda Oturak, Robert Jackson Spurling, Alireza Sepehrinezhad, Leonard Jacques, Susan E. Trolier-McKinstry, Adri C. T. van Duin, Jon-Paul Maria, Andrew M. Rappe, Ismaila Dabo

Abstract: Ferroelectrics are of practical interest for non-volatile data storage due to their reorientable, crystallographically defined polarization. Yet efforts to integrate conventional ferroelectrics into ultrathin memories have been frustrated by film-thickness limitations, which impede polarization reversal under low applied voltage. Wurtzite materials, including magnesium-substituted zinc oxide (Zn,M… ▽ More Ferroelectrics are of practical interest for non-volatile data storage due to their reorientable, crystallographically defined polarization. Yet efforts to integrate conventional ferroelectrics into ultrathin memories have been frustrated by film-thickness limitations, which impede polarization reversal under low applied voltage. Wurtzite materials, including magnesium-substituted zinc oxide (Zn,Mg)O, have been shown to exhibit scalable ferroelectricity as thin films. In this work, we explain the origins of ferroelectricity in (Zn,Mg)O, showing that large strain fluctuations emerge locally in (Zn,Mg)O and can reduce local barriers to ferroelectric switching by more than 40%. We provide concurrent experimental and computational evidence of these effects by demonstrating polarization switching in ZnO/(Zn,Mg)O/ZnO heterostructures featuring built-in interfacial strain gradients. These results open up an avenue to develop scalable ferroelectrics by controlling strain fluctuations atomistically. △ Less

Submitted 11 July, 2024; v1 submitted 9 November, 2023; originally announced November 2023.

Comments: 12 pages, 5 figures

Discovery of the Zintl-phosphide BaCd$_{2}$P$_{2}$ as a long carrier lifetime and stable solar absorber

Authors: Zhenkun Yuan, Diana Dahliah, Muhammad Rubaiat Hasan, Gideon Kassa, Andrew Pike, Shaham Quadir, Romain Claes, Cierra Chandler, Yihuang Xiong, Victoria Kyveryga, Philip Yox, Gian-Marco Rignanese, Ismaila Dabo, Andriy Zakutayev, David P. Fenning, Obadiah G. Reid, Sage Bauers, Jifeng Liu, Kirill Kovnir, Geoffroy Hautier

Abstract: Thin-film photovoltaics offers a path to significantly decarbonize our energy production. Unfortunately, current materials commercialized or under development as thin-film solar cell absorbers are far from optimal as they show either low power conversion efficiency or issues with earth-abundance and stability. Entirely new and disruptive materials platforms are rarely discovered as the search for… ▽ More Thin-film photovoltaics offers a path to significantly decarbonize our energy production. Unfortunately, current materials commercialized or under development as thin-film solar cell absorbers are far from optimal as they show either low power conversion efficiency or issues with earth-abundance and stability. Entirely new and disruptive materials platforms are rarely discovered as the search for new solar absorbers is traditionally slow and serendipitous. Here, we use first principles high-throughput screening to accelerate this process. We identify new solar absorbers among known inorganic compounds using considerations on band gap, carrier transport, optical absorption but also on intrinsic defects which can strongly limit the carrier lifetime and ultimately the solar cell efficiency. Screening about 40,000 materials, we discover the Zintl-phosphide BaCd$_{2}$P$_{2}$ as a potential high-efficiency solar absorber. Follow-up experimental work confirms the predicted promises of BaCd$_{2}$P$_{2}$ highlighting an optimal band gap for visible absorption, bright photoluminescence, and long carrier lifetime of up to 30 ns even for unoptimized powder samples. Importantly, BaCd$_{2}$P$_{2}$ does not contain any critical elements and is highly stable in air and water. Our work opens an avenue for a new family of stable, earth-abundant, high-performance Zintl-based solar absorbers. It also demonstrates how recent advances in first principles computation can accelerate the search of photovoltaic materials by combining high-throughput screening with experiment. △ Less

Submitted 27 October, 2023; originally announced October 2023.

Journal ref: Joule 8 (2024) 1412-1429

Large Enhancements in Optical and Piezoelectric Properties in Ferroelectric Zn1-xMgxO Thin Films through Engineering Electronic and Ionic Anharmonicities

Authors: Rui Zu, Gyunghyun Ryu, Kyle P. Kelley, Steven M. Baksa, Leonard C Jacques, Bo Wang, Kevin Ferri, **gyang He, Long-Qing Chen, Ismaila Dabo, Susan Trolier-McKinstry, Jon-Paul Maria, Venkatraman Gopalan

Abstract: Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second-order optical nonlinearity and large bandgap with piezoelectricity could, for example, enable broadband, strain-tunable photonics. Though very different phenomena at distinct frequencies, both second-order optical nonlinearity and piezoelectricity are third-rank polar tensors present onl… ▽ More Multifunctionality as a paradigm requires materials exhibiting multiple superior properties. Integrating second-order optical nonlinearity and large bandgap with piezoelectricity could, for example, enable broadband, strain-tunable photonics. Though very different phenomena at distinct frequencies, both second-order optical nonlinearity and piezoelectricity are third-rank polar tensors present only in acentric crystal structures. However, simultaneously enhancing both phenomena is highly challenging since it involves competing effects with tradeoffs. Recently, a large switchable ferroelectric polarization of ~ 80 uC cm-2 was reported in Zn1-xMgxO films. Here, ferroelectric Zn1-xMgxO is demonstrated to be a platform that hosts simultaneously a 30% increase in the electronic bandgap, a 50% enhancement in the second harmonic generation coefficients, and a near 200% improvement in the piezoelectric coefficients over pure ZnO. These enhancements are shown to be due to a 400% increase in the electronic anharmonicity and a ~200% decrease in the ionic anharmonicity with Mg substitution. Precisely controllable periodic ferroelectric domain gratings are demonstrated down to 800 nm domain width, enabling ultraviolet quasi-phase-matched optical harmonic generation as well as domain-engineered piezoelectric devices. △ Less

Submitted 9 May, 2023; v1 submitted 27 April, 2023; originally announced April 2023.

Ternary oxides of $\textit{s}$- and $\textit{p}$-block metals for photocatalytic solar-to-hydrogen conversion

Authors: Simon Gelin, Nicole E. Kirchner-Hall, Rowan R. Katzbaer, Monica J. Theibault, Yihuang Xiong, Wayne Zhao, Mohammed M. Khan, Eric Andrewlavage, Paul Orbe, Steven M. Baksa, Matteo Cococcioni, Iurii Timrov, Quinn Campbell, Héctor Abruña, Raymond E. Schaak, Ismaila Dabo

Abstract: Oxides containing metals or metalloids from the {\it p}-block of the periodic table ({\it e.g.}, In, Sn, Sb, Pb, Bi) are of technological interest as transparent conductors and light absorbers for solar energy conversion due to the tunability of their electronic conductivity and optical absorption. Comparatively, these oxides have found limited applications in hydrogen photoelectrolysis primarily… ▽ More Oxides containing metals or metalloids from the {\it p}-block of the periodic table ({\it e.g.}, In, Sn, Sb, Pb, Bi) are of technological interest as transparent conductors and light absorbers for solar energy conversion due to the tunability of their electronic conductivity and optical absorption. Comparatively, these oxides have found limited applications in hydrogen photoelectrolysis primarily due to their high electronegativity, which impedes electron transfer for reducing protons into hydrogen. We have shown recently that inserting {\it s}-block cations into {\it p}-block metal oxides is effective at lowering electronegativities while affording further control of band gaps. Here, we explain the origins of this dual tunability by demonstrating the mediator role of {\it s}-block cations in modulating orbital hybridization while not contributing to frontier electronic states. From this result, we carry out a comprehensive computational study of 109 ternary oxides of {\it s}- and {\it p}-block metal elements as candidate photocatalysts for solar hydrogen generation. We downselect the most desirable materials using band gaps and band edges obtained from Hubbard-corrected density-functional theory with Hubbard parameters computed entirely from first principles, evaluate the stability of these oxides in aqueous conditions, and characterize experimentally four of the remaining materials, synthesized with high phase uniformity, to validate and further develop the computational models. We thus propose nine oxide semiconductors, including CsIn$_3$O$_5$, Sr$_2$In$_2$O$_5$, and KSbO$_2$ which, to the extent of our literature review, have not been previously considered as water-splitting photocatalysts. △ Less

Submitted 18 December, 2023; v1 submitted 6 March, 2023; originally announced March 2023.

Comments: 14 pages, 5 figures, 1 supplemental material

koopmans: an open-source package for accurately and efficiently predicting spectral properties with Koopmans functionals

Authors: Edward Linscott, Nicola Colonna, Riccardo De Gennaro, Ngoc Linh Nguyen, Giovanni Borghi, Andrea Ferretti, Ismaila Dabo, Nicola Marzari

Abstract: Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in con… ▽ More Over the past decade we have developed Koopmans functionals, a computationally efficient approach for predicting spectral properties with an orbital-density-dependent functional framework. These functionals impose a generalized piecewise linearity condition to the entire electronic manifold, ensuring that orbital energies match the corresponding electron removal/addition energy differences (in contrast to semi-local DFT, where a mismatch between the two lies at the heart of the band gap problem and, more generally, the unreliability of Kohn-Sham orbital energies). This strategy has proven to be very powerful, yielding molecular orbital energies and solid-state band structures with comparable accuracy to many-body perturbation theory but at greatly reduced computational cost while preserving a functional formulation. This paper reviews the theory of Koopmans functionals, discusses the algorithms necessary for their implementation, and introduces koopmans, an open-source package that contains all of the code and workflows needed to perform Koopmans functional calculations and obtain reliable spectral properties of molecules and materials. △ Less

Submitted 7 August, 2023; v1 submitted 15 February, 2023; originally announced February 2023.

Comments: 73 pages, 4 figures, 3 tables. Document includes supporting information

Thermodynamic and electron-transport properties of Ca3Ru2O7 from first-principles phonon calculations and Boltzmann transport theory

Authors: Yi Wang, Yihuang Xiong, Tiannan Yang, Yakun Yuan, Shunli Shang, Zi-Kui Liu, Venkatraman Gopalan, Ismaila Dabo, Long-Qing Chen

Abstract: This work demonstrates a first-principles-based approach to obtaining finite temperature thermal and electronic transport properties which can be employed to model and understand mesoscale structural evolution during electronic, magnetic, and structural phase transitions. A computationally tractable model was introduced to estimate the temperature dependence of the electron relaxation time. The mo… ▽ More This work demonstrates a first-principles-based approach to obtaining finite temperature thermal and electronic transport properties which can be employed to model and understand mesoscale structural evolution during electronic, magnetic, and structural phase transitions. A computationally tractable model was introduced to estimate the temperature dependence of the electron relaxation time. The model is applied to Ca3Ru2O7 with a focus on understanding its electrical resistivity across the electronic phase transition at 48 K. A quasiharmonic phonon approach to the lattice vibrations was employed to account for thermal expansion while the Boltzmann transport theory including spin-orbit coupling was used to calculate the electron-transport properties, including the temperature dependence of electrical conductivity. △ Less

Submitted 16 October, 2022; originally announced October 2022.

Comments: 4 figures

Optimized utilization of COMB3 reactive potentials in LAMMPS

Authors: Robert Slapikas, Ismaila Dabo, Susan B. Sinnott

Abstract: An investigation to optimize the application of the third-generation charge optimized many-body (COMB3) interatomic potential and associated input parameters was carried out through the study of solid-liquid interactions in classical molecular dynamics (MD) simulations. The rates of these molecular interactions are understood though the wetting rates of water nano droplets on a bare copper (111) s… ▽ More An investigation to optimize the application of the third-generation charge optimized many-body (COMB3) interatomic potential and associated input parameters was carried out through the study of solid-liquid interactions in classical molecular dynamics (MD) simulations. The rates of these molecular interactions are understood though the wetting rates of water nano droplets on a bare copper (111) surface. Implementing the Langevin thermostat, the influence of simulation time step, the number of atoms in the system, the frequency at which charge equilibration is performed, and the temperature relaxation rate are all examined. The results indicate that time steps of 0.4 fs are possible when using longer relaxation times for the system temperature, which is almost double the typical time step used for reactive potentials. The use of the QEq charge equilibration allows for a fewer atomic layers to be used in the Cu slab. In addition, charge equilibrium schemes do not need to be performed every time step to ensure accurate charge transfer. Interestingly, the rate of wetting for the nanodroplets is dominantly dependent on the temperature relaxation time which are predicted to significantly change the viscosity of the water droplets. This work provides a pathway for optimizing simulations using the COMB3 reactive interatomic potential. △ Less

Submitted 30 April, 2021; originally announced May 2021.

Comments: 16 pages, 6 figures

Journal ref: J. Chem. Phys. 2020

Predicting the pseudocapacitive windows for MXene electrodes with voltage-dependent cluster expansion models

Authors: James M. Goff, Francisco Marques dos Santos Vieira, Nathan D. Keilbart, Yasuaki Okada, Ismaila Dabo

Abstract: MXene transition-metal carbides and nitrides are of growing interest for energy storage applications. These compounds are especially promising for use as pseudocapacitive electrodes due to their ability to convert energy electrochemically at fast rates. Using voltage-dependent cluster expansion models, we predict the charge storage performance of MXene pseudocapacitors for a range of electrode com… ▽ More MXene transition-metal carbides and nitrides are of growing interest for energy storage applications. These compounds are especially promising for use as pseudocapacitive electrodes due to their ability to convert energy electrochemically at fast rates. Using voltage-dependent cluster expansion models, we predict the charge storage performance of MXene pseudocapacitors for a range of electrode compositions. $M_3C_2O_2$ electrodes based on group-VI transition metals have up to 80% larger areal energy densities than prototypical titanium-based ( e.g. $Ti_3C_2O_2$) MXene electrodes. We attribute this high pseudocapacitance to the Faradaic voltage windows of group-VI MXene electrodes, which are predicted to be 1.2 to 1.8 times larger than those of titanium-based MXenes. The size of the pseudocapacitive voltage window increases with the range of oxidation states that is accessible to the MXene transition metals. By similar mechanisms, the presence of multiple ions in the solvent (Li$^+$ and H$^+$) leads to sharp changes in the transition-metal oxidation states and can significantly increase the charge capacity of MXene pseudocapacitors. △ Less

Submitted 23 February, 2021; originally announced February 2021.

Comments: For associated supporting information or data, please contact the corresponding author

Quantifying multi-point ordering in alloys

Authors: James M. Goff, Bryant Y. Li, Susan B. Sinnott, Ismaila Dabo

Abstract: A central problem in multicomponent lattice systems is to systematically quantify multi-point ordering. Ordering in such systems is often described in terms of pairs, even though this is not sufficient when three-point and higher-order interactions are included in the Hamiltonian. Current models and parameters for multi-point ordering are often only applicable for very specific cases and/or requir… ▽ More A central problem in multicomponent lattice systems is to systematically quantify multi-point ordering. Ordering in such systems is often described in terms of pairs, even though this is not sufficient when three-point and higher-order interactions are included in the Hamiltonian. Current models and parameters for multi-point ordering are often only applicable for very specific cases and/or require approximating a subset of correlated occupational variables on a lattice as being uncorrelated. In this work, a cluster order parameter (ClstOP) is introduced to systematically quantify arbitrary multi-point ordering motifs in substitutional systems through direct calculations of normalized cluster probabilities. These parameters can describe multi-point chemical ordering in crystal systems with multiple sublattices, multiple components, and systems with reduced symmetry. These are defined within and applied to quantify four-point chemical ordering motifs in platinum/palladium alloy nanoparticles that are practical interest to the synthesis of catalytic nanocages. Impacts of chemical ordering on alloy nanocage stability are discussed. It is demonstrated that approximating 4-point probabilities from superpositions of lower order pair probabilities is not sufficient in cases where 3 and 4-body terms are included in the energy expression. Conclusions about the formation mechanisms of nanocages may change significantly when using common pair approximations. △ Less

Submitted 9 June, 2021; v1 submitted 19 February, 2021; originally announced February 2021.

Journal ref: Phys. Rev. B 104, 054109 (2021)

Data-driven analysis of the electronic-structure factors controlling the work functions of perovskite oxides

Authors: Yihuang Xiong, Weinan Chen, Wenbo Guo, Hua Wei, Ismaila Dabo

Abstract: Tuning the work functions of materials is of practical interest for maximizing the performance of microelectronic and (photo)electrochemical devices, as the efficiency of these systems depends on the ability to control electronic levels at surfaces and across interfaces. Perovskites are promising compounds to achieve such control. In this work, we examine the work functions of more than 1,000 pero… ▽ More Tuning the work functions of materials is of practical interest for maximizing the performance of microelectronic and (photo)electrochemical devices, as the efficiency of these systems depends on the ability to control electronic levels at surfaces and across interfaces. Perovskites are promising compounds to achieve such control. In this work, we examine the work functions of more than 1,000 perovskite oxide surfaces (ABO$_3$) by data-driven (machine-learning) analysis and identify the factors that determine their magnitude. While the work functions of BO$_2$-terminated surfaces are sensitive to the energy of the hybridized oxygen p bands, the work functions of AO-terminated surfaces exhibit a much less trivial dependence with respect to the filling of the d bands of the B-site atom and of its electronic affinity. This study shows the utility of interpretable data-driven models in analyzing the work functions of cubic perovskites from a limited number of electronic-structure descriptors. △ Less

Submitted 14 February, 2021; originally announced February 2021.

Extensive Benchmarking of DFT+U Calculations for Predicting Band Gaps

Authors: Nicole E. Kirchner-Hall, Wayne Zhao, Yihuang Xiong, Iurii Timrov, Ismaila Dabo

Abstract: Accurate computational predictions of band gaps are of practical importance to the modeling and development of semiconductor technologies, such as (opto)electronic devices and photoelectrochemical cells. Among available electronic-structure methods, density-functional theory (DFT) with the Hubbard U correction (DFT+U) applied to band edge states is a computationally tractable approach to improve t… ▽ More Accurate computational predictions of band gaps are of practical importance to the modeling and development of semiconductor technologies, such as (opto)electronic devices and photoelectrochemical cells. Among available electronic-structure methods, density-functional theory (DFT) with the Hubbard U correction (DFT+U) applied to band edge states is a computationally tractable approach to improve the accuracy of band gap predictions beyond that of DFT calculations based on (semi)local functionals. At variance with DFT approximations, which are not intended to describe optical band gaps and other excited-state properties, DFT+U can be interpreted as an approximate spectral-potential method when U is determined by imposing the piecewise linearity of the total energy with respect to electronic occupations in the Hubbard manifold (thus removing self-interaction errors in this subspace), thereby providing a (heuristic) justification for using DFT+U to predict band gaps. However, it is still frequent in the literature to determine the Hubbard U parameters semiempirically by tuning their values to reproduce experimental band gaps, which ultimately alters the description of other total-energy characteristics. Here, we present an extensive assessment of DFT+U band gaps computed using self-consistent ab initio U parameters obtained from density-functional perturbation theory to impose the aforementioned piecewise linearity of the total energy. The study is carried out on 20 compounds containing transition-metal or p-block (group III-IV) elements, including oxides, nitrides, sulfides, oxynitrides, and oxysulfides... △ Less

Submitted 12 March, 2021; v1 submitted 8 February, 2021; originally announced February 2021.

Comments: 22 pages, 5 figures, 6 tables

Journal ref: Appl. Sci. 2021, 11, 2395

Optimizing accuracy and efficacy in data-driven materials discovery for the solar production of hydrogen

Authors: Yihuang Xiong, Quinn T. Campbell, Julian Fanghanel, Catherine K. Badding, Huaiyu Wang, Nicole E. Kirchner-Hall, Monica J. Theibault, Iurii Timrov, Jared S. Mondschein, Kriti Seth, Rebecca Katz, Andres Molina Villarino, Betül Pamuk, Megan E. Penrod, Mohammed M. Khan, Tiffany Rivera, Nathan C. Smith, Xavier Quintana, Paul Orbe, Craig J. Fennie, Senorpe Asem-Hiablie, James L. Young, Todd G. Deutsch, Matteo Cococcioni, Venkatraman Gopalan , et al. (3 additional authors not shown)

Abstract: The production of hydrogen fuels, via water splitting, is of practical relevance for meeting global energy needs and mitigating the environmental consequences of fossil-fuel-based transportation. Water photoelectrolysis has been proposed as a viable approach for generating hydrogen, provided that stable and inexpensive photocatalysts with conversion efficiencies over 10% can be discovered, synthes… ▽ More The production of hydrogen fuels, via water splitting, is of practical relevance for meeting global energy needs and mitigating the environmental consequences of fossil-fuel-based transportation. Water photoelectrolysis has been proposed as a viable approach for generating hydrogen, provided that stable and inexpensive photocatalysts with conversion efficiencies over 10% can be discovered, synthesized at scale, and successfully deployed (Pinaud et al., Energy Environ. Sci., 2013, 6, 1983). While a number of first-principles studies have focused on the data-driven discovery of photocatalysts, in the absence of systematic experimental validation, the success rate of these predictions may be limited. We address this problem by develo** a screening procedure with co-validation between experiment and theory to expedite the synthesis, characterization, and testing of the computationally predicted, most desirable materials. Starting with 70,150 compounds in the Materials Project database, the proposed protocol yielded 71 candidate photocatalysts, 11 of which were synthesized as single-phase materials. Experiments confirmed hydrogen generation and favorable band alignment for 6 of the 11 compounds, with the most promising ones belonging to the families of alkali and alkaline-earth indates and orthoplumbates. This study shows the accuracy of a nonempirical, Hubbard-corrected density-functional theory method to predict band gaps and band offsets at a fraction of the computational cost of hybrid functionals, and outlines an effective strategy to identify photocatalysts for solar hydrogen generation. △ Less

Submitted 1 February, 2021; originally announced February 2021.

Photo-physics and electronic structure of lateral graphene/MoS2 and metal/MoS2 junctions

Authors: Shruti Subramanian, Quinn T. Campbell, Simon Moser, Jonas Kiemle, Philipp Zimmermann, Paul Seifert, Florian Sigger, Deeksha Sharma, Hala Al-Sadeg, Michael Labella III, Dacen Waters, Randall M. Feenstra, Roland J. Koch, Chris Jozwiak, Aaron Bostwick, Eli Rotenberg, Ismaila Dabo, Alexander Holleitner, Thomas E. Beechem, Ursula Wurstbauer, Joshua A. Robinson

Abstract: Integration of semiconducting transition metal dichalcogenides (TMDs) into functional optoelectronic circuitries requires an understanding of the charge transfer across the interface between the TMD and the contacting material. Here, we use spatially resolved photocurrent microscopy to demonstrate electronic uniformity at the epitaxial graphene/molybdenum disulfide (EG/MoS2) interface. A 10x large… ▽ More Integration of semiconducting transition metal dichalcogenides (TMDs) into functional optoelectronic circuitries requires an understanding of the charge transfer across the interface between the TMD and the contacting material. Here, we use spatially resolved photocurrent microscopy to demonstrate electronic uniformity at the epitaxial graphene/molybdenum disulfide (EG/MoS2) interface. A 10x larger photocurrent is extracted at the EG/MoS2 interface when compared to metal (Ti/Au) /MoS2 interface. This is supported by semi-local density-functional theory (DFT), which predicts the Schottky barrier at the EG/MoS2 interface to be ~2x lower than Ti/MoS2. We provide a direct visualization of a 2D material Schottky barrier through combination of angle resolved photoemission spectroscopy with spatial resolution selected to be ~300 nm (nano-ARPES) and DFT calculations. A bending of ~500 meV over a length scale of ~2-3 micrometer in the valence band maximum of MoS2 is observed via nano-ARPES. We explicate a correlation between experimental demonstration and theoretical predictions of barriers at graphene/TMD interfaces. Spatially resolved photocurrent map** allows for directly visualizing the uniformity of built-in electric fields at heterostructure interfaces, providing a guide for microscopic engineering of charge transport across heterointerfaces. This simple probe-based technique also speaks directly to the 2D synthesis community to elucidate electronic uniformity at domain boundaries alongside morphological uniformity over large areas. △ Less

Submitted 25 June, 2020; originally announced June 2020.

Achieving Minimal Heat Conductivity by Ballistic Confinement in Phononic Metalattices

Authors: Weinan Chen, Disha Talreja, Devon Eichfeld, Pratibha Mahale, Nabila Nabi Nova, Hiu Y. Cheng, Jennifer L. Russell, Shih-Ying Yu, Nicolas Poilvert, Gerald Mahan, Suzanne E. Mohney, Vincent H. Crespi, Thomas E Mallouk, John V. Badding, Brian Foley, Venkatraman Gopalan, Ismaila Dabo

Abstract: Controlling the thermal conductivity of semiconductors is of practical interest in optimizing the performance of thermoelectric and phononic devices. The insertion of inclusions of nanometer size in a semiconductor is an effective means of achieving such control; it has been proposed that the thermal conductivity of silicon could be reduced to 1 W/m/K using this approach and that a minimum in the… ▽ More Controlling the thermal conductivity of semiconductors is of practical interest in optimizing the performance of thermoelectric and phononic devices. The insertion of inclusions of nanometer size in a semiconductor is an effective means of achieving such control; it has been proposed that the thermal conductivity of silicon could be reduced to 1 W/m/K using this approach and that a minimum in the heat conductivity would be reached for some optimal size of the inclusions. Yet the practical verification of this design rule has been limited. In this work, we address this question by studying the thermal properties of silicon metalattices that consist of a periodic distribution of spherical inclusions with radii from 7 to 30 nm, embedded into silicon. Experimental measurements confirm that the thermal conductivity of silicon metalattices is as low as 1 W/m/K for silica inclusions, and that this value can be further reduced to 0.16 W/m/K for silicon metalattices with empty pores. A detailed model of ballistic phonon transport suggests that this thermal conductivity is close to the lowest achievable by tuning the radius and spacing of the periodic inhomogeneities. This study is a significant step in elucidating the scaling laws that dictate ballistic heat transport at the nanoscale in silicon and other semiconductors. △ Less

Submitted 30 April, 2020; originally announced April 2020.

Journal ref: ACS Nano 2020, 14, 4, 4235-4243

Antisymmetry: Fundamentals and Applications

Authors: Hari Padmanabhan, Jason M. Munro, Ismaila Dabo, Venkatraman Gopalan

Abstract: Symmetry is fundamental to understanding our physical world. An antisymmetry operation switches between two different states of a trait, such as two time-states, position-states, charge-states, spin-states, chemical-species etc. This review covers the fundamental concepts of antisymmetry, and focuses on four antisymmetries, namely spatial inversion in point groups, time reversal, distortion revers… ▽ More Symmetry is fundamental to understanding our physical world. An antisymmetry operation switches between two different states of a trait, such as two time-states, position-states, charge-states, spin-states, chemical-species etc. This review covers the fundamental concepts of antisymmetry, and focuses on four antisymmetries, namely spatial inversion in point groups, time reversal, distortion reversal and wedge reversion. The distinction between classical and quantum mechanical descriptions of time reversal is presented. Applications of these antisymmetries in crystallography, diffraction, determining the form of property tensors, classifying distortion pathways in transition state theory, finding minimum energy pathways, diffusion, magnetic structures and properties, ferroelectric and multiferroic switching, classifying physical properties in arbitrary dimensions, and antisymmetry-protected topological phenomena are presented. △ Less

Submitted 13 April, 2020; originally announced April 2020.

Comments: When citing this paper, please use the following: Padmanabhan H, Munro JM, Dabo I, Gopalan V. 2020. Antisymmetry: Fundamentals and Applications. Annu. Rev. Mat. Res.: Submitted. DOI: 10.1146/annurev-matsci-100219-101404

Journal ref: Annual Review of Materials Research (2020)

Voltage effects on the stability of Pd ensembles in Pd-Au/Au(111) surface alloys

Authors: Stephen E. Weitzner, Ismaila Dabo

Abstract: The catalytic performance of multimetallic electrodes is often attributed to a beneficial combination of ligand, strain, and ensemble effects. Understanding the influence of the electrochemical environment on the stability of the alloy surface structure is thus a crucial component to the design of highly active and durable electrocatalysts. In this work, we study the effects of an applied voltage… ▽ More The catalytic performance of multimetallic electrodes is often attributed to a beneficial combination of ligand, strain, and ensemble effects. Understanding the influence of the electrochemical environment on the stability of the alloy surface structure is thus a crucial component to the design of highly active and durable electrocatalysts. In this work, we study the effects of an applied voltage to electrocatalytic Pd-Au/Au(111) surface alloys in contact with a model continuum electrolyte. Using planewave density functional theory, two-dimensional cluster expansions are parameterized and used to simulate dilute Pd-Au surface alloys under electrochemical conditions via Metropolis Monte Carlo within an extended canonical ensemble. While Pd monomers are stable at all potentials considered, different extents of surface electrification are observed to promote the formation of Pd dimers and trimers, as well as clusters of Pd monomers. We find that the relative proportion of monomer, dimer, and trimer surface fractions is in good agreement with in situ scanning tunneling microscopy measurements. The further development and refinement of the approaches described herein may serve as a useful aid in the development of next-generation electrocatalysts. △ Less

Submitted 30 October, 2018; originally announced December 2018.

Comments: 21 pages and 11 figures

Influence of surface restructuring on the activity of SrTiO3 photoelectrodes for photocatalytic hydrogen reduction

Authors: Yihuang Xiong, Ismaila Dabo

Abstract: Perovskite photoelectrodes are being extensively studied in search for photocatalytic materials that can produce hydrogen through water splitting. The solar-to-hydrogen efficiency of these materials is critically dependent on the electrochemical state of their surface. Here, we develop an embedded quantum-mechanical approach using the self-consistent continuum solvation (SCCS) model to predict the… ▽ More Perovskite photoelectrodes are being extensively studied in search for photocatalytic materials that can produce hydrogen through water splitting. The solar-to-hydrogen efficiency of these materials is critically dependent on the electrochemical state of their surface. Here, we develop an embedded quantum-mechanical approach using the self-consistent continuum solvation (SCCS) model to predict the relation between band alignment, electrochemical stability, and photocatalytic activity taking into account the long-range polarization of the semiconductor electrode under electrical bias. Using this comprehensive model, we calculate the charge-voltage response of various reconstructions of a solvated SrTiO3 surface, revealing that interfacial charge trap** exerts primary control on the electrical response and surface stability of the photoelectrode. Our results provide a detailed molecular-level interpretation of the enhanced photocatalytic activity of SrTiO3 upon voltage-induced restructuring of the semiconductor-solution interface. △ Less

Submitted 27 May, 2019; v1 submitted 16 October, 2018; originally announced November 2018.

Journal ref: Phys. Rev. Materials 3, 065801 (2019)

DiSPy: Implementation of Distortion Symmetry for the Nudged Elastic Band Method

Authors: Jason M. Munro, Vincent S. Liu, Venkatraman Gopalan, Ismaila Dabo

Abstract: The nudged elastic band (NEB) method is a commonly used approach for the calculation of minimum energy pathways of kinetic processes. However, the final paths obtained rely heavily on the nature of the initially chosen path. This often necessitates running multiple calculations with differing starting points in order to obtain accurate results. Recently, it has been shown that the NEB algorithm ca… ▽ More The nudged elastic band (NEB) method is a commonly used approach for the calculation of minimum energy pathways of kinetic processes. However, the final paths obtained rely heavily on the nature of the initially chosen path. This often necessitates running multiple calculations with differing starting points in order to obtain accurate results. Recently, it has been shown that the NEB algorithm can only conserve or raise the distortion symmetry exhibited by an initial pathway. Using this knowledge, symmetry-adapted perturbations can be generated and used as a tool to systematically lower the initial path symmetry, enabling the exploration of other low-energy pathways that may exist. The group and representation theory details behind this process are presented and implemented in a standalone piece of software (DiSPy). The method is then demonstrated by applying it to the calculation of ferroelectric switching pathways in LiNbO3. Previously reported pathways are more easily obtained, with new paths also being found which involve a higher degree of atomic coordination. △ Less

Submitted 20 December, 2018; v1 submitted 3 October, 2018; originally announced October 2018.

Voltage-dependent reconstruction of layered Bi$_2$WO$_6$ and Bi$_2$MoO$_6$ photocatalysts and its influence on charge separation for water splitting

Authors: Quinn Campbell, Daniel Fisher, Ismaila Dabo

Abstract: We study the surface stability of the layered bismuth-oxide Bi$_2$WO$_6$ and Bi$_2$MoO$_6$ photocatalysts, which belong to the series of Aurivillius (Bi$_2$A$_{n-1}$B$_{n}$O$_{3n+3}$) perovskites and have been proposed as efficient visible-light absorbers, due to favorable electronic hybridization induced by the Bi 6s and 6p orbitals. We present a Newton--Raphson optimization of the charge distrib… ▽ More We study the surface stability of the layered bismuth-oxide Bi$_2$WO$_6$ and Bi$_2$MoO$_6$ photocatalysts, which belong to the series of Aurivillius (Bi$_2$A$_{n-1}$B$_{n}$O$_{3n+3}$) perovskites and have been proposed as efficient visible-light absorbers, due to favorable electronic hybridization induced by the Bi 6s and 6p orbitals. We present a Newton--Raphson optimization of the charge distribution at the semiconductor--solution interface using the self-consistent continuum solvation (SCCS) model to describe the influence of the aqueous environment. Our analysis provides a description of the charged interface under controlled pH and applied voltage, and offers a molecular interpretation of the competing structural and electrical factors that underlie the facet-dependent photocatalytic activity of layered Bi$_2$A$_{n-1}$B$_{n}$O$_{3n+3}$ compounds. △ Less

Submitted 8 January, 2019; v1 submitted 25 September, 2018; originally announced September 2018.

Comments: 9 pages, 6 figures, with supporting information

Journal ref: Phys. Rev. Materials 3, 015404 (2019)

Electrochemical stability and light-harvesting ability of silicon photoelectrodes in aqueous environments

Authors: Quinn Campbell, Ismaila Dabo

Abstract: We consider the factors that affect the photoactivity of silicon electrodes for the water-splitting reaction using a self-consistent continuum solvation (SCCS) model of the solid-liquid interface. This model allows us to calculate the charge-voltage response, Schottky barriers, and surface stability of different terminations while accounting for the interactions between the charge-pinning centers… ▽ More We consider the factors that affect the photoactivity of silicon electrodes for the water-splitting reaction using a self-consistent continuum solvation (SCCS) model of the solid-liquid interface. This model allows us to calculate the charge-voltage response, Schottky barriers, and surface stability of different terminations while accounting for the interactions between the charge-pinning centers at the surface and the depletion region of the semiconductor. We predict that the most stable oxidized surface does not have a favorable Schottky barrier, which further explains the low solar-to-hydrogen performance of passivated silicon electrodes. △ Less

Submitted 7 September, 2019; v1 submitted 1 August, 2018; originally announced August 2018.

Comments: 20 pages, 5 figures, plus supporting information

A new symmetry-based framework for discovering minimum energy pathways

Authors: Jason M. Munro, Hirofumi Akamatsu, Haricharan Padmanabhan, Vincent S. Liu, Yin Shi, Long-Qing Chen, Brian K. VanLeeuwen, Ismaila Dabo, Venkatraman Gopalan

Abstract: Physical systems evolve from one state to another along paths of least energy barrier. Without a priori knowledge of the energy landscape, multidimensional search methods aim to find such minimum energy pathways between the initial and final states of a kinetic process. However in many cases, the user has to repeatedly provide initial guess paths, thus ensuring that the reliability of the final re… ▽ More Physical systems evolve from one state to another along paths of least energy barrier. Without a priori knowledge of the energy landscape, multidimensional search methods aim to find such minimum energy pathways between the initial and final states of a kinetic process. However in many cases, the user has to repeatedly provide initial guess paths, thus ensuring that the reliability of the final result is heavily user-dependent. Recently, the idea of "distortion symmetry groups" as a complete description of the symmetry of a path has been introduced. Through this, a new framework is enabled that provides a powerful means of classifying the infinite collection of possible pathways into a finite number of symmetry equivalent subsets, and then exploring each of these subsets systematically using rigorous group theoretical methods. The method is shown to lead to the discovery of new, previously hidden pathways for the case studies of bulk ferroelectric switching and domain wall motion in proper and improper ferroelectrics, as well as in multiferroic switching. This approach is applicable to a wide variety of physical phenomena ranging from structural, electronic and magnetic distortions, diffusion, and phase transitions in materials. △ Less

Submitted 18 April, 2018; originally announced April 2018.

Voltage-dependent cluster expansion for electrified solid-liquid interfaces: Application to the electrochemical deposition of transition metals

Authors: Stephen E. Weitzner, Ismaila Dabo

Abstract: The detailed atomistic modeling of electrochemically deposited metal monolayers is challenging due to the complex structure of the metal-solution interface and the critical effects of surface elec- trification during electrode polarization. Accurate models of interfacial electrochemical equilibria are further challenged by the need to include entropic effects to obtain accurate surface chemical po… ▽ More The detailed atomistic modeling of electrochemically deposited metal monolayers is challenging due to the complex structure of the metal-solution interface and the critical effects of surface elec- trification during electrode polarization. Accurate models of interfacial electrochemical equilibria are further challenged by the need to include entropic effects to obtain accurate surface chemical potentials. We present an embedded quantum-continuum model of the interfacial environment that addresses each of these challenges and study the underpotential deposition of silver on the gold (100) surface. We leverage these results to parameterize a cluster expansion of the electrified in- terface and show through grand canonical Monte Carlo calculations the crucial need to account for variations in the interfacial dipole when modeling electrodeposited metals under finite-temperature electrochemical conditions. △ Less

Submitted 7 November, 2017; v1 submitted 10 August, 2017; originally announced August 2017.

Comments: 6 pages, 1 ancillary pdf

Journal ref: Phys. Rev. B 96, 205134 (2017)

Quantum-continuum calculation of the surface states and electrical response of silicon in solution

Authors: Quinn Campbell, Ismaila Dabo

Abstract: A wide range of electrochemical reactions of practical importance occur at the interface between a semiconductor and an electrolyte. We present an embedded density-functional theory method using the recently released self-consistent continuum solvation (SCCS) approach to study these interfaces. In this model, a quantum description of the surface is incorporated into a continuum representation of t… ▽ More A wide range of electrochemical reactions of practical importance occur at the interface between a semiconductor and an electrolyte. We present an embedded density-functional theory method using the recently released self-consistent continuum solvation (SCCS) approach to study these interfaces. In this model, a quantum description of the surface is incorporated into a continuum representation of the bending of the bands within the electrode. The model is applied to understand the electrical response of silicon electrodes in solution, providing microscopic insights into the low-voltage region, where surface states determine the electrification of the semiconductor electrode. △ Less

Submitted 20 July, 2017; v1 submitted 6 January, 2017; originally announced January 2017.

Comments: 8 pages, 5 figures

Journal ref: Phys. Rev. B 95, 205308 (2017)

Quantum-continuum simulation of underpotential deposition at electrified metal-solution interfaces

Authors: Stephen E. Weitzner, Ismaila Dabo

Abstract: The underpotential deposition of transition metal ions is a critical step in many electrosynthetic approaches. While underpotential deposition has been intensively studied at the atomic level, first-principles calculations in vacuum can strongly underestimate the stability of underpotentially deposited metals. It has been shown recently that the consideration of co-adsorbed anions can deliver more… ▽ More The underpotential deposition of transition metal ions is a critical step in many electrosynthetic approaches. While underpotential deposition has been intensively studied at the atomic level, first-principles calculations in vacuum can strongly underestimate the stability of underpotentially deposited metals. It has been shown recently that the consideration of co-adsorbed anions can deliver more reliable descriptions of underpotential deposition reactions; however, the influence of additional key environmental factors such as the electrification of the interface under applied voltage and the activities of the ions in solution have yet to be investigated. In this work, copper underpotential deposition on gold is studied under realistic electrochemical conditions using a quantum-continuum model of the electrochemical interface. We report here on the influence of surface electrification, concentration effects, and anion co-adsorption on the stability of the copper underpotential deposition layer on the gold (100) surface. △ Less

Submitted 6 January, 2017; originally announced January 2017.

Comments: Accepted for publication in npj Computational Materials

Quantum-continuum simulation of the electrochemical response of pseudocapacitor electrodes from realistic conditions

Authors: Nathan Keilbart, Yasuaki Okada, Aion Feehan, Shinichi Higai, Ismaila Dabo

Abstract: Pseudocapacitors are energy-storage devices characterized by fast and reversible redox reactions that enable them to store large amounts of electrical energy at high rates. We simulate the response of pseudocapacitive electrodes under realistic conditions to identify the microscopic factors that determine their performance, focusing on ruthenia (RuO2) as a prototypical electrode material. Electron… ▽ More Pseudocapacitors are energy-storage devices characterized by fast and reversible redox reactions that enable them to store large amounts of electrical energy at high rates. We simulate the response of pseudocapacitive electrodes under realistic conditions to identify the microscopic factors that determine their performance, focusing on ruthenia (RuO2) as a prototypical electrode material. Electronic-structure methods are used together with a self-consistent continuum solvation (SCCS) model to build a complete dataset of free energies as the surface of the charged electrode is gradually covered with protons under applied voltage. The resulting dataset is exploited to compute hydrogen-adsorption isotherms and charge-voltage responses by means of grand-canonical sampling, finding close agreement with experimental voltammetry. These simulations reveal that small changes on the order of 5 μF/cm2 in the intrinsic double-layer capacitance of the electrode-electrolyte interface can induce variations of up to 40 μF/cm2 in the overall pseudocapacitance. △ Less

Submitted 18 May, 2017; v1 submitted 6 January, 2017; originally announced January 2017.

Comments: 8 pages with 6 figures and 1 table

Journal ref: Phys. Rev. B 95, 115423 (2017)

Photoemission Spectroscopy and Orbital Imaging from Koopmans-Compliant Functionals

Authors: Ngoc Linh Nguyen, Giovanni Borghi, Andrea Ferretti, Ismaila Dabo, Nicola Marzari

Abstract: The determination of spectral properties from first principles can provide powerful connections between microscopic theoretical predictions and experimental data, but requires complex electronic-structure formulations that fall outside the domain of applicability of common approaches, such as density-functional theory. We show here that Koopmans-compliant functionals, constructed to enforce piecew… ▽ More The determination of spectral properties from first principles can provide powerful connections between microscopic theoretical predictions and experimental data, but requires complex electronic-structure formulations that fall outside the domain of applicability of common approaches, such as density-functional theory. We show here that Koopmans-compliant functionals, constructed to enforce piecewise linearity in energy functionals with respect to fractional occupations - i.e. with respect to charged excitations - provide molecular photoemission spectra and momentum maps of Dyson orbitals that are in excellent agreement with experimental ultraviolet photoemission spectroscopy and orbital tomography data. These results highlight the role of Koopmans-compliant functionals as accurate and inexpensive quasiparticle approximations to the spectral potential. △ Less

Submitted 15 September, 2014; originally announced September 2014.

Koopmans-compliant functionals and their performance against reference molecular data

Authors: Giovanni Borghi, Andrea Ferretti, Ngoc Linh Nguyen, Ismaila Dabo, Nicola Marzari

Abstract: Koopmans-compliant functionals emerge naturally from extending the constraint of piecewise linearity of the total energy as a function of the number of electrons to each fractional orbital occupation. When applied to approximate density-functional theory, these corrections give rise to orbital-density-dependent functionals and potentials. We show that the simplest implementations of Koopmans' comp… ▽ More Koopmans-compliant functionals emerge naturally from extending the constraint of piecewise linearity of the total energy as a function of the number of electrons to each fractional orbital occupation. When applied to approximate density-functional theory, these corrections give rise to orbital-density-dependent functionals and potentials. We show that the simplest implementations of Koopmans' compliance provide accurate estimates for the quasiparticle excitations and leave the total energy functional almost or exactly intact, i.e., they describe correctly electron removals or additions, but do not necessarily alter the electronic charge density distribution within the system. Additional functionals can then be constructed that modify the potential energy surface, including e.g. Perdew-Zunger corrections. These functionals become exactly one-electron self-interaction free and, as all Koopmans-compliant functionals, are approximately many-electron self-interaction free. We discuss in detail these different formulations, and provide extensive benchmarks for the 55 molecules in the reference G2-1 set, using Koopmans-compliant functionals constructed from local-density or generalized-gradient approximations. In all cases we find excellent performance in the electronic properties, comparable or improved with respect to that of many-body perturbation theories, such as G$_0$W$_0$ and self-consistent GW, at a fraction of the cost and in a variational framework that also delivers energy derivatives. Structural properties and atomization energies preserve or slightly improve the accuracy of the underlying density-functional approximations (Note: Supplemental Material is included in the source). △ Less

Submitted 19 August, 2014; v1 submitted 19 May, 2014; originally announced May 2014.

Donor and acceptor levels of organic photovoltaic compounds from first principles

Authors: Ismaila Dabo, Andrea Ferretti, Cheol-Hwan Park, Nicolas Poilvert, Yanli Li, Matteo Cococcioni, Nicola Marzari

Abstract: Accurate and efficient approaches to predict the optical properties of organic semiconducting compounds could accelerate the search for efficient organic photovoltaic materials. Nevertheless, predicting the optical properties of organic semiconductors has been plagued by the inaccuracy or computational cost of conventional first-principles calculations. In this work, we demonstrate that orbital-de… ▽ More Accurate and efficient approaches to predict the optical properties of organic semiconducting compounds could accelerate the search for efficient organic photovoltaic materials. Nevertheless, predicting the optical properties of organic semiconductors has been plagued by the inaccuracy or computational cost of conventional first-principles calculations. In this work, we demonstrate that orbital-dependent density-functional theory based upon Koopmans' condition [Phys. Rev. B 82, 115121 (2010)] is apt at describing donor and acceptor levels for a wide variety of organic molecules, clusters, and oligomers within a few tenths of an electron-volt relative to experiment, which is comparable to the predictive performance of many-body perturbation theory methods at a fraction of the computational cost. △ Less

Submitted 7 December, 2012; v1 submitted 30 October, 2012; originally announced October 2012.

Comments: 13 pages, 11 figures

Journal ref: Phys. Chem. Chem. Phys. 15, 685 (2013)

Role of electronic localization in the phosphorescence of iridium sensitizing dyes

Authors: Burak Himmetoglu, Alex Marchenko, Ismaila Dabo, Matteo Cococcioni

Abstract: In this work we present a systematic study of three representative iridium dyes, namely, Ir(ppy)3, FIrpic and PQIr, which are commonly used as sensitizers in organic optoelectronic devices. We show that electronic correlations play a crucial role in determining the excited-state energies in these systems, due to localization of electrons on Ir d orbitals. Electronic localization is captured by emp… ▽ More In this work we present a systematic study of three representative iridium dyes, namely, Ir(ppy)3, FIrpic and PQIr, which are commonly used as sensitizers in organic optoelectronic devices. We show that electronic correlations play a crucial role in determining the excited-state energies in these systems, due to localization of electrons on Ir d orbitals. Electronic localization is captured by employing hybrid functionals within time-dependent density-functional theory (TDDFT) and with Hubbard-model corrections within the delta-SCF approach. The performance of both methods are studied comparatively and shown to be in good agreement with experiment. The Hubbard-corrected functionals provide further insight into the localization of electrons and on the charge-transfer character of excited-states. The gained insight allows us to comment on envisioned functionalization strategies to improve the performance of these systems. Complementary discussions on the delta-SCF method are also presented in order to fill some of the gaps in the literature. △ Less

Submitted 17 September, 2012; originally announced September 2012.

Comments: 15 pages, 14 figures

Journal ref: J. Chem. Phys. 137, 154309 (2012)

Resilience of gas-phase anharmonicity in the vibrational response of adsorbed carbon monoxide and breakdown under electrical conditions

Authors: Ismaila Dabo

Abstract: In surface catalysis, the adsorption of carbon monoxide on transition-metal electrodes represents the prototype of strong chemisorption. Notwithstanding significant changes in the molecular orbitals of adsorbed CO, spectroscopic experiments highlight a close correlation between the adsorbate stretching frequency and equilibrium bond length for a wide range of adsorption geometries and substrate co… ▽ More In surface catalysis, the adsorption of carbon monoxide on transition-metal electrodes represents the prototype of strong chemisorption. Notwithstanding significant changes in the molecular orbitals of adsorbed CO, spectroscopic experiments highlight a close correlation between the adsorbate stretching frequency and equilibrium bond length for a wide range of adsorption geometries and substrate compositions. In this work, we study the origins of this correlation, commonly known as Badger's rule, by deconvoluting and examining contributions from the adsorption environment to the intramolecular potential using first-principles calculations. Noting that intramolecular anharmonicity is preserved upon CO chemisorption, we show that Badger's rule for adsorbed CO can be expressed solely in terms of the tabulated Herzberg spectroscopic constants of isolated CO. Moreover, although it had been previously established using finite-cluster models that Badger's rule is not affected by electrical conditions, we find here that Badger's rule breaks down when the electrified surface is represented as a periodic slab. Examining this breakdown in terms of anharmonic contributions from the effective surface charge reveals limitations of conventional finite-cluster models in describing electrical conditions at metal electrodes. △ Less

Submitted 11 July, 2012; originally announced July 2012.

Comments: 11 pages, 8 figures, 4 tables

Revised self-consistent continuum solvation in electronic-structure calculations

Authors: Oliviero Andreussi, Ismaila Dabo, Nicola Marzari

Abstract: The solvation model proposed by Fattebert and Gygi [Journal of Computational Chemistry 23, 662 (2002)] and Scherlis et al. [Journal of Chemical Physics 124, 074103 (2006)] is reformulated, overcoming some of the numerical limitations encountered and extending its range of applicability. We first recast the problem in terms of induced polarization charges that act as a direct map** of the self-co… ▽ More The solvation model proposed by Fattebert and Gygi [Journal of Computational Chemistry 23, 662 (2002)] and Scherlis et al. [Journal of Chemical Physics 124, 074103 (2006)] is reformulated, overcoming some of the numerical limitations encountered and extending its range of applicability. We first recast the problem in terms of induced polarization charges that act as a direct map** of the self-consistent continuum dielectric; this allows to define a functional form for the dielectric that is well behaved both in the high-density region of the nuclear charges and in the low-density region where the electronic wavefunctions decay into the solvent. Second, we outline an iterative procedure to solve the Poisson equation for the quantum fragment embedded in the solvent that does not require multi-grid algorithms, is trivially parallel, and can be applied to any Bravais crystallographic system. Last, we capture some of the non-electrostatic or cavitation terms via a combined use of the quantum volume and quantum surface [Physical Review Letters 94, 145501 (2005)] of the solute. The resulting self-consistent continuum solvation (SCCS) model provides a very effective and compact fit of computational and experimental data, whereby the static dielectric constant of the solvent and one parameter allow to fit the electrostatic energy provided by the PCM model with a mean absolute error of 0.3 kcal/mol on a set of 240 neutral solutes. Two parameters allow to fit experimental solvation energies on the same set with a mean absolute error of 1.3 kcal/mol. A detailed analysis of these results, broken down along different classes of chemical compounds, shows that several classes of organic compounds display very high accuracy, with solvation energies in error of 0.3-0.4 kcal/mol, whereby larger discrepancies are mostly limited to self-dissociating species and strong hydrogen-bond forming compounds. △ Less

Submitted 22 December, 2011; originally announced December 2011.

Comments: The following article has been accepted by The Journal of Chemical Physics. After it is published, it will be found at http://link.aip.org/link/?jcp/

Journal ref: J. Chem. Phys. 136, 064102 (2012)

Variational Minimization of Orbital-dependent Density Functionals

Authors: Cheol-Hwan Park, Andrea Ferretti, Ismaila Dabo, Nicolas Poilvert, Nicola Marzari

Abstract: Functionals that strive to correct for such self-interaction errors, such as those obtained by imposing the Perdew-Zunger self-interaction correction or the generalized Koopmans' condition, become orbital dependent or orbital-density dependent, and provide a very promising avenue to go beyond density-functional theory, especially when studying electronic, optical and dielectric properties, charge-… ▽ More Functionals that strive to correct for such self-interaction errors, such as those obtained by imposing the Perdew-Zunger self-interaction correction or the generalized Koopmans' condition, become orbital dependent or orbital-density dependent, and provide a very promising avenue to go beyond density-functional theory, especially when studying electronic, optical and dielectric properties, charge-transfer excitations, and molecular dissociations. Unlike conventional density functionals, these functionals are not invariant under unitary transformations of occupied electronic states, which leave the total charge density intact, and this added complexity has greatly inhibited both their development and their practical applicability. Here, we first recast the minimization problem for non-unitary invariant energy functionals into the language of ensemble density-functional theory, decoupling the variational search into an inner loop of unitary transformations that minimize the energy at fixed orbital subspace, and an outer-loop evolution of the orbitals in the space orthogonal to the occupied manifold. Then, we show that the potential energy surface in the inner loop is far from convex parabolic in the early stages of the minimization and hence minimization schemes based on these assumptions are unstable, and present an approach to overcome such difficulty. The overall formulation allows for a stable, robust, and efficient variational minimization of non-unitary-invariant functionals, essential to study complex materials and molecules, and to investigate the bulk thermodynamic limit, where orbitals converge typically to localized Wannier functions. In particular, using maximally localized Wannier functions as an initial guess can greatly reduce the computational costs needed to reach the energy minimum while not affecting or improving the convergence efficiency. △ Less

Submitted 29 August, 2011; originally announced August 2011.

Comments: 10 pages, 6 figures

Electronic levels and electrical response of periodic molecular structures from plane-wave orbital-dependent calculations

Authors: Yanli Li, Ismaila Dabo

Abstract: Plane-wave electronic-structure predictions based upon orbital-dependent density-functional theory (OD-DFT) approximations, such as hybrid density-functional methods and self-interaction density-functional corrections, are severely affected by computational inaccuracies in evaluating electron interactions in the plane-wave representation. These errors arise from divergence singularities in the pla… ▽ More Plane-wave electronic-structure predictions based upon orbital-dependent density-functional theory (OD-DFT) approximations, such as hybrid density-functional methods and self-interaction density-functional corrections, are severely affected by computational inaccuracies in evaluating electron interactions in the plane-wave representation. These errors arise from divergence singularities in the plane-wave summation of electrostatic and exchange interaction contributions. Auxiliary-function corrections are reciprocal-space countercharge corrections that cancel plane-wave singularities through the addition of an auxiliary function to the point-charge electrostatic kernel that enters into the expression of interaction terms. At variance with real-space countercharge corrections that are employed in the context of density-functional theory (DFT), reciprocal-space corrections are computationally inexpensive, making them suited to more demanding OD-DFT calculations. Nevertheless, there exists much freedom in the choice of auxiliary functions and various definitions result in different levels of performance in eliminating plane-wave inaccuracies. In this work, we derive exact point-charge auxiliary functions for the description of molecular structures of arbitrary translational symmetry, including the yet unaddressed one-dimensional case. In addition, we provide a critical assessment of different reciprocal-space countercharge corrections and demonstrate the improved accuracy of point-charge auxiliary functions in predicting the electronic levels and electrical response of conjugated polymers from plane-wave OD-DFT calculations. △ Less

Submitted 11 July, 2011; originally announced July 2011.

Comments: 11 pages, 7 figures

Journal ref: Phys. Rev. B 84, 155127 (2011)

Koopmans' condition for density-functional theory

Authors: Ismaila Dabo, Andrea Ferretti, Nicolas Poilvert, Yanli Li, Nicola Marzari, Matteo Cococcioni

Abstract: In approximate Kohn-Sham density-functional theory, self-interaction manifests itself as the dependence of the energy of an orbital on its fractional occupation. This unphysical behavior translates into qualitative and quantitative errors that pervade many fundamental aspects of density-functional predictions. Here, we first examine self-interaction in terms of the discrepancy between total and pa… ▽ More In approximate Kohn-Sham density-functional theory, self-interaction manifests itself as the dependence of the energy of an orbital on its fractional occupation. This unphysical behavior translates into qualitative and quantitative errors that pervade many fundamental aspects of density-functional predictions. Here, we first examine self-interaction in terms of the discrepancy between total and partial electron removal energies, and then highlight the importance of imposing the generalized Koopmans' condition -- that identifies orbital energies as opposite total electron removal energies -- to resolve this discrepancy. In the process, we derive a correction to approximate functionals that, in the frozen-orbital approximation, eliminates the unphysical occupation dependence of orbital energies up to the third order in the single-particle densities. This non-Koopmans correction brings physical meaning to single-particle energies; when applied to common local or semilocal density functionals it provides results that are in excellent agreement with experimental data -- with an accuracy comparable to that of GW many-body perturbation theory -- while providing an explicit total energy functional that preserves or improves on the description of established structural properties. △ Less

Submitted 23 August, 2010; v1 submitted 11 August, 2010; originally announced August 2010.

Comments: 18 pages, 13 figures, 4 tables

Journal ref: Phys. Rev. B 82, 115121 (2010)

Quantum ESPRESSO: a modular and open-source software project for quantum simulations of materials

Authors: P. Giannozzi, S. Baroni, N. Bonini, M. Calandra, R. Car, C. Cavazzoni, D. Ceresoli, G. L. Chiarotti, m. Cococcioni, I. Dabo, A. Dal Corso, S. Fabris, G. Fratesi, S. de Gironcoli, R. Gebauer, U. Gerstmann, C. Gougoussis, A. Kokalj, M. Lazzeri, L. Martin-Samos, N. Marzari, F. Mauri, R. Mazzarello, S. Paolini, A. Pasquarello , et al. (8 additional authors not shown)

Abstract: Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to rese… ▽ More Quantum ESPRESSO is an integrated suite of computer codes for electronic-structure calculations and materials modeling, based on density-functional theory, plane waves, and pseudopotentials (norm-conserving, ultrasoft, and projector-augmented wave). Quantum ESPRESSO stands for "opEn Source Package for Research in Electronic Structure, Simulation, and Optimization". It is freely available to researchers around the world under the terms of the GNU General Public License. Quantum ESPRESSO builds upon newly-restructured electronic-structure codes that have been developed and tested by some of the original authors of novel electronic-structure algorithms and applied in the last twenty years by some of the leading materials modeling groups worldwide. Innovation and efficiency are still its main focus, with special attention paid to massively-parallel architectures, and a great effort being devoted to user friendliness. Quantum ESPRESSO is evolving towards a distribution of independent and inter-operable codes in the spirit of an open-source project, where researchers active in the field of electronic-structure calculations are encouraged to participate in the project by contributing their own codes or by implementing their own ideas into existing codes. △ Less

Submitted 26 July, 2009; v1 submitted 14 June, 2009; originally announced June 2009.

Comments: 36 pages, 5 figures, resubmitted to J.Phys.: Condens. Matter

Journal ref: J. Phys.: Condens. Matter 21, 395502 (2009)

Non-Koopmans Corrections in Density-functional Theory: Self-interaction Revisited

Authors: I. Dabo, M. Cococcioni, N. Marzari

Abstract: In effective single-electron theories, self-interaction manifests itself through the unphysical dependence of the energy of an electronic state as a function of its occupation, which results in important deviations from the ideal Koopmans trend and strongly affects the accuracy of electronic-structure predictions. Here, we study the non-Koopmans behavior of local and semilocal density-functional… ▽ More In effective single-electron theories, self-interaction manifests itself through the unphysical dependence of the energy of an electronic state as a function of its occupation, which results in important deviations from the ideal Koopmans trend and strongly affects the accuracy of electronic-structure predictions. Here, we study the non-Koopmans behavior of local and semilocal density-functional theory (DFT) total energy methods as a means to quantify and to correct self-interaction errors. We introduce a non-Koopmans self-interaction correction that generalizes the Perdew-Zunger scheme, and demonstrate its considerably improved performance in correcting the deficiencies of DFT approximations for self-interaction problems of fundamental and practical relevance. △ Less

Submitted 18 January, 2009; originally announced January 2009.

Comments: 4 pages, 3 figures, 1 table

Towards First-principles Electrochemistry

Authors: I. Dabo, E. Cancès, Y. L. Li, N. Marzari

Abstract: Chemisorbed molecules at a fuel cell electrode are a very sensitive probe of the surrounding electrochemical environment, and one that can be accurately monitored with different spectroscopic techniques. We develop a comprehensive electrochemical model to study molecular chemisorption at either constant charge or fixed applied voltage, and calculate from first principles the voltage dependence of… ▽ More Chemisorbed molecules at a fuel cell electrode are a very sensitive probe of the surrounding electrochemical environment, and one that can be accurately monitored with different spectroscopic techniques. We develop a comprehensive electrochemical model to study molecular chemisorption at either constant charge or fixed applied voltage, and calculate from first principles the voltage dependence of vibrational frequencies -- the vibrational Stark effect -- for CO adsorbed on close-packed platinum electrodes. The predicted vibrational Stark slopes are found to be in very good agreement with experimental electrochemical spectroscopy data, thereby resolving previous controversies in the quantitative interpretation of in-situ experiments and elucidating the relation between canonical and grand-canonicaldescriptions of vibrational surface phenomena. △ Less

Submitted 26 September, 2010; v1 submitted 31 December, 2008; originally announced January 2009.

Comments: 10 pages, 2 figures

Vibrational Recognition of Adsorption Sites for Carbon Monoxide on Platinum and Platinum-Ruthenium Surfaces

Authors: Ismaila Dabo, Andrzej Wieckowski, Nicola Marzari

Abstract: We have studied the vibrational properties of CO adsorbed on platinum and platinum-ruthenium surfaces using density-functional perturbation theory within the Perdew-Burke-Ernzerhof generalized-gradient approximation. The calculated C-O stretching frequencies are found to be in excellent agreement with spectroscopic measurements. The frequency shifts that take place when the surface is covered wi… ▽ More We have studied the vibrational properties of CO adsorbed on platinum and platinum-ruthenium surfaces using density-functional perturbation theory within the Perdew-Burke-Ernzerhof generalized-gradient approximation. The calculated C-O stretching frequencies are found to be in excellent agreement with spectroscopic measurements. The frequency shifts that take place when the surface is covered with ruthenium monolayers are also correctly predicted. This agreement for both shifts and absolute vibrational frequencies is made more remarkable by the frequent failure of local and semilocal exchange-correlation functionals in predicting the stability of the different adsorption sites for CO on transition metal surfaces. We have investigated the chemical origin of the C-O frequency shifts introducing an orbital-resolved analysis of the force and frequency density of states, and assessed the effect of donation and backdonation on the CO vibrational frequency using a GGA + molecular U approach. These findings rationalize and establish the accuracy of density-functional calculations in predicting absolute vibrational frequencies, notwithstanding the failure in determining relative adsorption energies, in the strong chemisorption regime. △ Less

Submitted 1 November, 2007; originally announced November 2007.

Comments: 21 pages, 9 figures

Journal ref: Journal of the American Chemical Society 129, 11045-11052 (2007)

Electrostatics in Periodic Boundary Conditions and Real-space Corrections

Authors: Ismaila Dabo, Boris Kozinsky, Nicholas E. Singh-Miller, Nicola Marzari

Abstract: We address periodic-image errors arising from the use of periodic boundary conditions to describe systems that do not exhibit full three-dimensional periodicity. The difference between the periodic potential, as straightforwardly obtained from a Fourier transform, and the potential satisfying any other boundary conditions can be characterized analytically. In light of this observation, we presen… ▽ More We address periodic-image errors arising from the use of periodic boundary conditions to describe systems that do not exhibit full three-dimensional periodicity. The difference between the periodic potential, as straightforwardly obtained from a Fourier transform, and the potential satisfying any other boundary conditions can be characterized analytically. In light of this observation, we present an efficient real-space method to correct periodic-image errors, based on a multigrid solver for the potential difference, and demonstrate that exponential convergence of the energy with respect to cell size can be achieved in practical calculations. Additionally, we derive rapidly convergent expansions for determining the Madelung constants of point-charge assemblies in one, two, and three dimensions. △ Less

Submitted 28 September, 2007; originally announced September 2007.