-
Interferometric Single-Shot Parity Measurement in an InAs-Al Hybrid Device
Authors:
Morteza Aghaee,
Alejandro Alcaraz Ramirez,
Zulfi Alam,
Rizwan Ali,
Mariusz Andrzejczuk,
Andrey Antipov,
Mikhail Astafev,
Amin Barzegar,
Bela Bauer,
Jonathan Becker,
Umesh Kumar Bhaskar,
Alex Bocharov,
Srini Boddapati,
David Bohn,
Jouri Bommer,
Leo Bourdet,
Arnaud Bousquet,
Samuel Boutin,
Lucas Casparis,
Benjamin James Chapman,
Sohail Chatoor,
Anna Wulff Christensen,
Cassandra Chua,
Patrick Codd,
William Cole
, et al. (137 additional authors not shown)
Abstract:
The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostruct…
▽ More
The fusion of non-Abelian anyons or topological defects is a fundamental operation in measurement-only topological quantum computation. In topological superconductors, this operation amounts to a determination of the shared fermion parity of Majorana zero modes. As a step towards this, we implement a single-shot interferometric measurement of fermion parity in indium arsenide-aluminum heterostructures with a gate-defined nanowire. The interferometer is formed by tunnel-coupling the proximitized nanowire to quantum dots. The nanowire causes a state-dependent shift of these quantum dots' quantum capacitance of up to 1 fF. Our quantum capacitance measurements show flux h/2e-periodic bimodality with a signal-to-noise ratio of 1 in 3.7 $μ$s at optimal flux values. From the time traces of the quantum capacitance measurements, we extract a dwell time in the two associated states that is longer than 1 ms at in-plane magnetic fields of approximately 2 T. These results are consistent with a measurement of the fermion parity encoded in a pair of Majorana zero modes that are separated by approximately 3 $μ$m and subjected to a low rate of poisoning by non-equilibrium quasiparticles. The large capacitance shift and long poisoning time enable a parity measurement error probability of 1%.
△ Less
Submitted 2 April, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Precision measurement of the microwave dielectric loss of sapphire in the quantum regime with parts-per-billion sensitivity
Authors:
Alexander P. Read,
Benjamin J. Chapman,
Chan U Lei,
Jacob C. Curtis,
Suhas Ganjam,
Lev Krayzman,
Luigi Frunzio,
Robert J. Schoelkopf
Abstract:
Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a m…
▽ More
Dielectric loss is known to limit state-of-the-art superconducting qubit lifetimes. Recent experiments imply upper bounds on bulk dielectric loss tangents on the order of $100$ parts-per-billion, but because these inferences are drawn from fully fabricated devices with many loss channels, they do not definitively implicate or exonerate the dielectric. To resolve this ambiguity, we have devised a measurement method capable of separating and resolving bulk dielectric loss with a sensitivity at the level of $5$ parts per billion. The method, which we call the dielectric dipper, involves the in-situ insertion of a dielectric sample into a high-quality microwave cavity mode. Smoothly varying the sample's participation in the cavity mode enables a differential measurement of the sample's dielectric loss tangent. The dielectric dipper can probe the low-power behavior of dielectrics at cryogenic temperatures, and does so without the need for any lithographic process, enabling controlled comparisons of substrate materials and processing techniques. We demonstrate the method with measurements of EFG sapphire, from which we infer a bulk loss tangent of $62(7) \times 10^{-9}$ and a substrate-air interface loss tangent of $12(2) \times 10^{-4}$. For a typical transmon, this bulk loss tangent would limit device quality factors to less than $20$ million, suggesting that bulk loss is likely the dominant loss mechanism in the longest-lived transmons on sapphire. We also demonstrate this method on HEMEX sapphire and bound its bulk loss tangent to be less than $15(5) \times 10^{-9}$. As this bound is about 3 times smaller than the bulk loss tangent of EFG sapphire, use of HEMEX sapphire as a substrate would lift the bulk dielectric coherence limit of a typical transmon qubit to several milliseconds.
△ Less
Submitted 30 April, 2023; v1 submitted 28 June, 2022;
originally announced June 2022.
-
A Machine-Learned Spin-Lattice Potential for Dynamic Simulations of Defective Magnetic Iron
Authors:
Jacob Bernard John Chapman,
Pui-Wai Ma
Abstract:
A machine-learned spin-lattice interatomic potential (MSLP) for magnetic iron is developed and applied to mesoscopic scale defects. It is achieved by augmenting a spin-lattice Hamiltonian with a neural network term trained to descriptors representing a mix of local atomic configuration and magnetic environments. It reproduces the cohesive energy of BCC and FCC phases with various magnetic states.…
▽ More
A machine-learned spin-lattice interatomic potential (MSLP) for magnetic iron is developed and applied to mesoscopic scale defects. It is achieved by augmenting a spin-lattice Hamiltonian with a neural network term trained to descriptors representing a mix of local atomic configuration and magnetic environments. It reproduces the cohesive energy of BCC and FCC phases with various magnetic states. It predicts the formation energy and complex magnetic structure of point defects in quantitative agreement with density functional theory (DFT) including the reversal and quenching of magnetic moments near the core of defects. The Curie temperature is calculated through spin-lattice dynamics showing good computational stability at high temperature. The potential is applied to study magnetic fluctuations near sizable dislocation loops. The MSLP transcends current treatments using DFT and molecular dynamics, and surpasses other spin-lattice potentials that only treat near-perfect crystal cases.
△ Less
Submitted 10 May, 2022;
originally announced May 2022.
-
Effect of Non-Heisenberg Magnetic Interactions on Defects in Ferromagnetic Iron
Authors:
Jacob B. J. Chapman,
Pui-Wai Ma,
Sergei L. Dudarev
Abstract:
Fundamental flaws in the Heisenberg Hamiltonian are highlighted in the context of its application to BCC Fe, including the particular issues arising when modelling lattice defects. Exchange integrals are evaluated using the magnetic force theorem. The bilinear exchange coupling constants are calculated for all the interacting pairs of atomic magnetic moments in large simulation cells containing de…
▽ More
Fundamental flaws in the Heisenberg Hamiltonian are highlighted in the context of its application to BCC Fe, including the particular issues arising when modelling lattice defects. Exchange integrals are evaluated using the magnetic force theorem. The bilinear exchange coupling constants are calculated for all the interacting pairs of atomic magnetic moments in large simulation cells containing defects, enabling a direct map** of the magnetic energy onto the Heisenberg Hamiltonian and revealing its limitations. We provide a simple procedure for extracting the Landau parameters from DFT calculations, to construct a Heisenberg-Landau Hamiltonian. We quantitatively show how the Landau terms correct the exchange-energy hypersurface, which is essential for the accurate evaluation of energies and migration barriers of defects.
△ Less
Submitted 2 April, 2020;
originally announced April 2020.
-
The Dynamics of Magnetism in Fe-Cr Alloys with Cr Clustering
Authors:
J. B. J. Chapman,
S. L. Dudarev,
P. -W. Ma
Abstract:
The dynamics of magnetic moments in iron-chromium alloys with different levels of Cr clustering show unusual features resulting from the fact that even in a perfect body-centred cubic structure, magnetic moments experience geometric magnetic frustration resembling that of a spin glass. Due to the long range exchange coupling and configuration randomness, magnetic moments of Cr solutes remain non-c…
▽ More
The dynamics of magnetic moments in iron-chromium alloys with different levels of Cr clustering show unusual features resulting from the fact that even in a perfect body-centred cubic structure, magnetic moments experience geometric magnetic frustration resembling that of a spin glass. Due to the long range exchange coupling and configuration randomness, magnetic moments of Cr solutes remain non-collinear at all temperatures. To characterise magnetic properties of Fe-Cr alloys, we explore the temperature dependence of magnetisation, susceptibility, Curie temperature and spin-spin correlations with spatial resolution. The static and dynamic magnetic properties are correlated with the microstructure of Fe-Cr, where magnetisation and susceptibility are determined by the size of Cr precipitates at nominal Cr concentrations. The Curie temperature is always maximised when the solute concentration of Cr in the $α$ phase is close to 5 to 6 at.\%, and the susceptibility of Fe atoms is always enhanced at the boundary between a precipitate and solid solution. Interaction between Cr and Fe stimulates magnetic disorder, lowering the effective Curie temperature. Dynamic simulation of evolution of magnetic correlations shows that the spin-spin relaxation time in Fe-Cr alloys is in the 20 to 40 ps range.
△ Less
Submitted 5 February, 2019;
originally announced February 2019.
-
Widely tunable on-chip microwave circulator for superconducting quantum circuits
Authors:
Benjamin J. Chapman,
Eric I. Rosenthal,
Joseph Kerckhoff,
Bradley A. Moores,
Leila R. Vale,
Gene C. Hilton,
Kevin Lalumière,
Alexandre Blais,
K. W. Lehnert
Abstract:
We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency. Non-reciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines. Isolation in t…
▽ More
We report on the design and performance of an on-chip microwave circulator with a widely (GHz) tunable operation frequency. Non-reciprocity is created with a combination of frequency conversion and delay, and requires neither permanent magnets nor microwave bias tones, allowing on-chip integration with other superconducting circuits without the need for high-bandwidth control lines. Isolation in the device exceeds 20 dB over a bandwidth of tens of MHz, and its insertion loss is small, reaching as low as 0.9 dB at select operation frequencies. Furthermore, the device is linear with respect to input power for signal powers up to hundreds of fW ($\approx 10^3$ circulating photons), and the direction of circulation can be dynamically reconfigured. We demonstrate its operation at a selection of frequencies between 4 and 6 GHz.
△ Less
Submitted 6 November, 2017; v1 submitted 14 July, 2017;
originally announced July 2017.
-
Improving the Functional Control of Aged Ferroelectrics using Insights from Atomistic Modelling
Authors:
J. B. J. Chapman,
R. E. Cohen,
A. V. Kimmel,
D. M. Duffy
Abstract:
We provide a fundamental insight into the microscopic mechanisms of the ageing processes. Using large scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed ageing phenomena can be reproduced from intrinsic interactions of defect-dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. W…
▽ More
We provide a fundamental insight into the microscopic mechanisms of the ageing processes. Using large scale molecular dynamics simulations of the prototypical ferroelectric material PbTiO3, we demonstrate that the experimentally observed ageing phenomena can be reproduced from intrinsic interactions of defect-dipoles related to dopant-vacancy associates, even in the absence of extrinsic effects. We show that variation of the dopant concentration modifies the material's hysteretic response. We identify a universal method to reduce loss and tune the electromechanical properties of inexpensive ceramics for efficient technologies.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Single-sideband modulator for frequency domain multiplexing of superconducting qubit readout
Authors:
Benjamin J. Chapman,
Eric I. Rosenthal,
Joseph Kerckhoff,
Leila R. Vale,
Gene C. Hilton,
K. W. Lehnert
Abstract:
We introduce and experimentally characterize a superconducting single-sideband modulator compatible with cryogenic microwave circuits, and propose its use for frequency domain multiplexing of superconducting qubit readout. The monolithic single-quadrature modulators that comprise the device are formed with purely reactive elements (capacitors and Josephson junction inductors) and require no microw…
▽ More
We introduce and experimentally characterize a superconducting single-sideband modulator compatible with cryogenic microwave circuits, and propose its use for frequency domain multiplexing of superconducting qubit readout. The monolithic single-quadrature modulators that comprise the device are formed with purely reactive elements (capacitors and Josephson junction inductors) and require no microwave-frequency control tones. Microwave signals in the 4 to 8 GHz band, with power up to -85 dBm, are converted up or down in frequency by as much as 120 MHz. Spurious harmonics in the device can be suppressed by up to 25 dB for select probe and modulation frequencies.
△ Less
Submitted 24 May, 2017; v1 submitted 5 March, 2017;
originally announced March 2017.
-
General purpose multiplexing device for cryogenic microwave systems
Authors:
Benjamin J. Chapman,
Bradley A. Moores,
Eric I. Rosenthal,
Joseph Kerckhoff,
K. W. Lehnert
Abstract:
We introduce and experimentally characterize a general purpose device for signal processing in circuit quantum electrodynamics systems. The device is a broadband two-port microwave circuit element with three modes of operation: it can transmit, reflect, or invert incident signals between 4 and 8 GHz. This property makes it a versatile tool for lossless signal processing at cryogenic temperatures.…
▽ More
We introduce and experimentally characterize a general purpose device for signal processing in circuit quantum electrodynamics systems. The device is a broadband two-port microwave circuit element with three modes of operation: it can transmit, reflect, or invert incident signals between 4 and 8 GHz. This property makes it a versatile tool for lossless signal processing at cryogenic temperatures. In particular, rapid switching (less than or equal to 15 ns) between these operation modes enables several multiplexing readout protocols for superconducting qubits. We report the device's performance in a two-channel code domain multiplexing demonstration. The multiplexed data are recovered with fast readout times (up to 400 ns) and infidelities less than 0.01 for probe powers greater than 7 fW, in agreement with the expectation for binary signaling with Gaussian noise.
△ Less
Submitted 31 May, 2016; v1 submitted 8 March, 2016;
originally announced March 2016.
-
Out-of-Plane Spin-Orientation Dependent Magnetotransport Properties in the Anisotropic Helimagnet Cr$_{1/3}$NbS$_2$
Authors:
Alexander C. Bornstein,
Benjamin J. Chapman,
Nirmal J. Ghimire,
David G. Mandrus,
David S. Parker,
Minhyea Lee
Abstract:
Understanding the role of spin-orbit coupling (SOC) has been crucial to controlling magnetic anisotropy in magnetic multilayer films. It has been shown that electronic structure can be altered via interface SOC by varying the superlattice structure, resulting in spontaneous magnetization perpendicular or parallel to the plane. In lieu of magnetic thin films, we study the similarly anisotropic heli…
▽ More
Understanding the role of spin-orbit coupling (SOC) has been crucial to controlling magnetic anisotropy in magnetic multilayer films. It has been shown that electronic structure can be altered via interface SOC by varying the superlattice structure, resulting in spontaneous magnetization perpendicular or parallel to the plane. In lieu of magnetic thin films, we study the similarly anisotropic helimagnet Cr$_{1/3}$NbS$_2$, where the spin polarization direction, controlled by the applied magnetic field, can modify the electronic structure. As a result, the direction of spin polarization can modulate the density of states, and in turn affect the in-plane electrical conductivity. In Cr$_{1/3}$NbS$_2$, we found an enhancement of in-plane conductivity when the spin polarization is out-of-plane, as compared to in-plane spin polarization. This is consistent with the increase of density of states near the Fermi energy at the same spin configuration, found from first principles calculations. We also observe unusual field dependence of the Hall signal in the same temperature range. This is unlikely to originate from the non-collinear spin texture, but rather further indicates strong dependence of electronic structure on spin orientation relative to the plane.
△ Less
Submitted 3 April, 2015;
originally announced April 2015.
-
On-chip superconducting microwave circulator from synthetic rotation
Authors:
Joseph Kerckhoff,
Kevin Lalumière,
Benjamin J. Chapman,
Alexandre Blais,
K. W. Lehnert
Abstract:
We analyze the design of a potential replacement technology for the commercial ferrite circulators that are ubiquitous in contemporary quantum superconducting microwave experiments. The lossless, lumped element design is capable of being integrated on chip with other superconducting microwave devices, thus circumventing the many performance-limiting aspects of ferrite circulators. The design is ba…
▽ More
We analyze the design of a potential replacement technology for the commercial ferrite circulators that are ubiquitous in contemporary quantum superconducting microwave experiments. The lossless, lumped element design is capable of being integrated on chip with other superconducting microwave devices, thus circumventing the many performance-limiting aspects of ferrite circulators. The design is based on the dynamic modulation of DC superconducting microwave quantum interference devices (SQUIDs) that function as nearly linear, tunable inductors. The connection to familiar ferrite-based circulators is a simple frame boost in the internal dynamics' equation of motion. In addition to the general, schematic analysis, we also give an overview of many considerations necessary to achieve a practical design with a tunable center frequency in the 4-8 GHz frequency band, a bandwidth of 240 MHz, reflections at the -20 dB level, and a maximum signal power of approximately order 100 microwave photons per inverse bandwidth.
△ Less
Submitted 20 February, 2015;
originally announced February 2015.
-
Spin Structure of the Anisotropic Helimagnet Cr$_{1/3}$NbS$_2$ in a Magnetic Field
Authors:
Benjamin J. Chapman,
Alexander C. Bornstein,
Nirmal J. Ghimire,
David Mandrus,
Minhyea Lee
Abstract:
In this letter we describe the ground-state magnetic structure of the highly anisotropic helimagnet Cr$_{1/3}$NbS$_2$ in a magnetic field. A Heisenberg spin model with Dyzaloshinkii-Moriya interactions and magne- tocrystalline anisotropy allows the ground state spin structure to be calculated for magnetic fields of arbitrary strength and direction. Comparison with magnetization measurements shows…
▽ More
In this letter we describe the ground-state magnetic structure of the highly anisotropic helimagnet Cr$_{1/3}$NbS$_2$ in a magnetic field. A Heisenberg spin model with Dyzaloshinkii-Moriya interactions and magne- tocrystalline anisotropy allows the ground state spin structure to be calculated for magnetic fields of arbitrary strength and direction. Comparison with magnetization measurements shows excellent agreement with the predicted spin structure.
△ Less
Submitted 19 August, 2014;
originally announced August 2014.
-
Large enhancement of emergent magnetic fields in MnSi with impurities and pressure
Authors:
Benjamin J. Chapman,
Maxwell G. Grossnickle,
Thomas Wolf,
Minhyea Lee
Abstract:
We report a study of the topological Hall effect (THE) in Fe-doped MnSi and compare with results from pure MnSi under pressure. We find that Fe do** increases the THE, indicating an enhancement of the magnitude of the emergent gauge field. This is consistent with the concurrent reduction in the length scale of the skyrmion lattice. For both pressurized and doped samples, we calculate the emergen…
▽ More
We report a study of the topological Hall effect (THE) in Fe-doped MnSi and compare with results from pure MnSi under pressure. We find that Fe do** increases the THE, indicating an enhancement of the magnitude of the emergent gauge field. This is consistent with the concurrent reduction in the length scale of the skyrmion lattice. For both pressurized and doped samples, we calculate the emergent magnetic field based on the size of the measured THE, and compare it with a theoretical upper-bound. We find that the ratio of these two remains more or less constant with pressure or Fe do**, but differs greatly from that of pure MnSi at ambient pressure. We discuss the implications of this ratio with respect to trends in the saturated magnetic moment and helical pitch length as T_C \rightarrow 0 via do** and pressure, respectively.
△ Less
Submitted 15 January, 2014;
originally announced January 2014.
-
Exact time-dependent density-functional potentials for strongly correlated tunneling electrons
Authors:
Matthew J. P. Hodgson,
James D. Ramsden,
Jacob B. J. Chapman,
Piers Lillystone,
Rex W Godby
Abstract:
By propagating the many-body Schrödinger equation, we determine the exact time-dependent Kohn-Sham potential for a system of strongly correlated electrons which undergo field-induced tunneling. Numerous features are entirely absent from the approximations commonly used in time-dependent density-functional theory. The self-interaction correction is strong and time dependent, owing to electron local…
▽ More
By propagating the many-body Schrödinger equation, we determine the exact time-dependent Kohn-Sham potential for a system of strongly correlated electrons which undergo field-induced tunneling. Numerous features are entirely absent from the approximations commonly used in time-dependent density-functional theory. The self-interaction correction is strong and time dependent, owing to electron localization, and prominent dynamic spatial potential steps arise from minima in the charge density, as modified by the Coulomb interaction experienced by the partially tunneled electron.
△ Less
Submitted 9 December, 2013;
originally announced December 2013.
