-
Intraband collective excitations in fractional Chern insulators are dark
Authors:
Tobias M. R. Wolf,
Yung-Chun Chao,
Allan H. MacDonald,
Jung Jung Su
Abstract:
The low-energy collective excitations of semiconductors and insulators often couple strongly to light, allowing them to be probed optically. We argue here that in fractional Chern insulators intra-band collective excitations are dark in the sense that they couple anomalously weakly to light. This conclusion is based on a relationship between ideal quantum geometry and the structure factor of a Che…
▽ More
The low-energy collective excitations of semiconductors and insulators often couple strongly to light, allowing them to be probed optically. We argue here that in fractional Chern insulators intra-band collective excitations are dark in the sense that they couple anomalously weakly to light. This conclusion is based on a relationship between ideal quantum geometry and the structure factor of a Chern band, and on a classical plasma analogy motivated by the vortexibility property of ideal Chern bands.
△ Less
Submitted 15 June, 2024;
originally announced June 2024.
-
Pound-Drever-Hall Feedforward: Laser Phase Noise Suppression beyond Feedback
Authors:
Yu-Xin Chao,
Zhen-Xing Hua,
Xin-Hui Liang,
Zong-Pei Yue,
Li You,
Meng Khoon Tey
Abstract:
Pound-Drever-Hall (PDH) is a laser frequency stabilization technique widely used for building narrow-linewidth lasers. We develop a scheme that greatly expands its noise-suppression capability and bandwidth. The idea is simply to feedforward the residual PDH error signal of a locked laser to that laser again after a delay fiber. Demonstrating this idea on a common setup, we realize a phase noise s…
▽ More
Pound-Drever-Hall (PDH) is a laser frequency stabilization technique widely used for building narrow-linewidth lasers. We develop a scheme that greatly expands its noise-suppression capability and bandwidth. The idea is simply to feedforward the residual PDH error signal of a locked laser to that laser again after a delay fiber. Demonstrating this idea on a common setup, we realize a phase noise suppression exceeding 37 dB at 2 MHz, setting a record one to two orders of magnitude better than previously reported feedforward schemes. Our method allows phase noise suppression capability equivalent to cavity filtering but does not suffer from limited power transmitted through the cavity.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Studies of two-dimensional material resistive random-access memory by kinetic Monte Carlo simulations
Authors:
Ying-Chuan Chen,
Yu-Ting Chao,
Edward Chen,
Chao-Hsin Wu,
Yuh-Renn Wu
Abstract:
Resistive memory based on 2D WS2, MoS2, and h-BN materials has been studied, including experiments and simulations. The influences with different active layer thicknesses have been discussed, including experiments and simulations. The thickness with the best On/Off ratio is also found for the 2D RRAM. This work reveals fundamental differences between a 2D RRAM and a conventional oxide RRAM. Furthe…
▽ More
Resistive memory based on 2D WS2, MoS2, and h-BN materials has been studied, including experiments and simulations. The influences with different active layer thicknesses have been discussed, including experiments and simulations. The thickness with the best On/Off ratio is also found for the 2D RRAM. This work reveals fundamental differences between a 2D RRAM and a conventional oxide RRAM. Furthermore, from the physical parameters extracted with the KMC model, the 2D materials have a lower diffusion activation energy from the vertical direction, where a smaller bias voltage and a shorter switching time can be achieved. It was also found the diffusion activation energy from the CVD-grown sample is much lower than the mechanical exfoliated sample. The result shows MoS2 has the fastest switching speed among three 2D materials.
△ Less
Submitted 30 September, 2023; v1 submitted 22 April, 2023;
originally announced April 2023.
-
Diffusion-Dominated Pinch-Off of Ultralow Surface Tension Fluids
Authors:
Jack Hau Yung Lo,
Yuan Liu,
Sze Yi Mak,
Zhuo Xu,
Youchuang Chao,
Kaye Jiale Li,
Ho Cheung Shum,
Lei Xu
Abstract:
We study the breakup of a liquid thread inside another liquid at different surface tensions. In general, the pinch-off of a liquid thread is governed by the dynamics of fluid flow. However, when the interfacial tension is ultralow (2 to 3 orders lower than normal liquids), we find that the pinch-off dynamics can be governed by bulk diffusion. By studying the velocity and the profile of the pinch-o…
▽ More
We study the breakup of a liquid thread inside another liquid at different surface tensions. In general, the pinch-off of a liquid thread is governed by the dynamics of fluid flow. However, when the interfacial tension is ultralow (2 to 3 orders lower than normal liquids), we find that the pinch-off dynamics can be governed by bulk diffusion. By studying the velocity and the profile of the pinch-off, we explain why the diffusion-dominated pinch-off takes over the conventional breakup at ultralow surface tensions.
△ Less
Submitted 28 November, 2022;
originally announced November 2022.
-
How liquid-liquid phase separation induces active spreading
Authors:
Youchuang Chao,
Olinka Ramirez-Soto,
Christian Bahr,
Stefan Karpitschka
Abstract:
The interplay between phase separation and wetting of multicomponent mixtures is ubiquitous in nature and technology and recently gained significant attention across scientific disciplines, due to the discovery of biomolecular condensates. It is well understood that sessile droplets, undergoing phase separation in a static wetting configuration, exhibit microdroplet nucleation at their contact lin…
▽ More
The interplay between phase separation and wetting of multicomponent mixtures is ubiquitous in nature and technology and recently gained significant attention across scientific disciplines, due to the discovery of biomolecular condensates. It is well understood that sessile droplets, undergoing phase separation in a static wetting configuration, exhibit microdroplet nucleation at their contact lines, forming an oil ring during later stages. However, very little is known about the dynamic counterpart, when phase separation occurs in a non-equilibrium wetting configuration, i.e., spreading droplets. Here we report that liquid-liquid phase separation strongly couples to the spreading motion of three-phase contact lines. Thus, the classical Cox-Voinov law is not applicable anymore, because phase separation adds an active spreading force beyond the capillary driving. Intriguingly, we observe that spreading starts well before any visible nucleation of microdroplets in the main droplet. Using high-speed ellipsometry, we further demonstrate that surface forces cause an even earlier nucleation in the wetting precursor film around the droplet, initiating the observed wetting transition. We expect our findings to enrich the fundamental understanding of phase separation processes that involve dynamical contact lines and/or surface forces, with implications in a wide range of applications, from oil recovery or inkjet printing to material synthesis and biomolecular condensates.
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
Scale-dependent irreversibility in living matter
Authors:
Tzer Han Tan,
Garrett A. Watson,
Yu-Chen Chao,
Junang Li,
Todd R. Gingrich,
Jordan M. Horowitz,
Nikta Fakhri
Abstract:
A defining feature of living matter is the ability to harness energy to self-organize multiscale structures whose functions are facilitated by irreversible nonequilibrium dynamics. While progress has been made in elucidating the underlying principles, what remains unclear is the role that thermodynamics plays in sha** these structures and their ensuing functions. Here, we unravel how a fundament…
▽ More
A defining feature of living matter is the ability to harness energy to self-organize multiscale structures whose functions are facilitated by irreversible nonequilibrium dynamics. While progress has been made in elucidating the underlying principles, what remains unclear is the role that thermodynamics plays in sha** these structures and their ensuing functions. Here, we unravel how a fundamental thermodynamic connection between the physical energy dissipation sustaining a nonequilibrium system and a measure of statistical irreversibility (arrow of time), can provide quantitative insight into the mechanisms of nonequilibrium activity across scales. Specifically, we introduce a multiscale irreversibility metric and demonstrate how it can be used to extract model-independent estimates of dissipative timescales. Using this metric, we measure the dissipation timescale of a multiscale cellular structure - the actomyosin cortex - and further observe that the irreversibility metric maintains a monotonic relationship with the underlying biological nonequilibrium activity. Additionally, the irreversibility metric can detect shifts in the dissipative timescales when we induce spatiotemporal patterns of biochemical signaling proteins upstream of actomyosin activation. Our experimental measurements are complemented by a theoretical analysis of a generic class of nonequilibrium dynamics, elucidating how dissipative timescales manifest in multiscale irreversibility.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
Development of the Soft X-ray AGM-AGS RIXS Beamline at Taiwan Photon Source
Authors:
A. Singh,
H. Y. Huang,
Y. Y. Chu,
C. Y. Hua,
S. W. Lin,
H. S. Fung,
H. W. Shiu,
J. Chang,
J. H. Li,
J. Okamoto,
C. C. Chiu,
C. H. Chang,
W. B. Wu,
S. Y. Perng,
S. C. Chung,
K. Y. Kao,
S. C. Yeh,
H. Y. Chao,
J. H. Chen,
D. J. Huang,
C. T. Chen
Abstract:
We report on the development of a high-resolution and highly efficient beamline for soft-X-ray resonant inelastic X-ray scattering (RIXS) located at Taiwan Photon Source. This beamline adopts an optical design that uses an active grating monochromator (AGM) and an active grating spectrometer (AGS) to implement the energy compensation principle of grating dispersion. Active gratings are utilized to…
▽ More
We report on the development of a high-resolution and highly efficient beamline for soft-X-ray resonant inelastic X-ray scattering (RIXS) located at Taiwan Photon Source. This beamline adopts an optical design that uses an active grating monochromator (AGM) and an active grating spectrometer (AGS) to implement the energy compensation principle of grating dispersion. Active gratings are utilized to diminish defocus, coma and higher-order aberrations as well as to decrease the slope errors caused by thermal deformation and optical polishing. The AGS is mounted on a rotatable granite platform to enable momentum-resolved RIXS measurements with scattering angle over a wide range. Several high-precision instruments developed in house for this beamline are briefly described. The best energy resolution obtained from this AGM-AGS beamline was 12.4 meV at 530 eV, achieving a resolving power 42,000, while the bandwidth of the incident soft X-rays was kept at 0.5 eV. To demonstrate the scientific impacts of high-resolution RIXS, we present an example of momentum-resolved RIXS measurements on a high-temperature superconducting cuprate, La$_{2-x}$Sr$_x$CuO$_4$. The measurements reveal the A$_{1g}$ apical oxygen phonons in superconducting cuprates, opening a new opportunity to investigate the coupling between these phonons and charge density waves.
△ Less
Submitted 24 June, 2020; v1 submitted 23 June, 2020;
originally announced June 2020.
-
Mean escape time for randomly switching narrow gates in a cellular flow
Authors:
Hui Wang,
**qiao Duan,
Xianguo Geng,
Ying Chao
Abstract:
The escape of particles through a narrow absorbing gate in confined domains is a abundant phenomenon in various systems in physics, chemistry and molecular biophysics. We consider the narrow escape problem in a cellular flow when the two gates randomly switch between different states with a switching rate k between the two gates. After briefly deriving the coupled partial differential equations fo…
▽ More
The escape of particles through a narrow absorbing gate in confined domains is a abundant phenomenon in various systems in physics, chemistry and molecular biophysics. We consider the narrow escape problem in a cellular flow when the two gates randomly switch between different states with a switching rate k between the two gates. After briefly deriving the coupled partial differential equations for the escape time through two gates, we compute the mean escape time for particles esca** from the gates with different initial states. By numerical simulation under nonuniform boundary conditions, we quantify how narrow escape time is affected by the switching rate k between the two gates, arc length s between two gates, angular velocity w of the cellular flow and diffusion coefficient D. We reveal that the mean escape time decreases with the switching rate k between the two gates, angular velocity w and diffusion coefficient D for fixed arc length, but takes the minimum when the two gates are evenly separated on the boundary for any given switching rate k between the two gates. In particular, we find that when the arc length size ε for the gates is sufficiently small, the average narrow escape time is approximately independent of the gate arc length size. We further indicate combinations of system parameters (regions located in the parameter space) such that the mean escape time is the longest or shortest. Our findings provide mathematical understanding for phenomena such as how ions select ion channels and how chemicals leak in annulus ring containers, when drift vector fields are present.
△ Less
Submitted 30 November, 2018;
originally announced December 2018.
-
Fast Fabrication of Sub-200-nm Nanogrooves using Liquid Crystal Material
Authors:
Dae Seok Kim,
Yun Jeong Cha,
Min-Jun Gim,
Dong Ki Yoon
Abstract:
Self-assembly of soft materials attracts keen interest for patterning applications owing to its ease and spontaneous behavior. We report the fabrication of nanogrooves using sublimation and recondensation of liquid crystal (LC) materials. First, well-aligned smectic LC structures are obtained on the micron-scale topographic patterns of the microchannel; then the sublimation and recondensation proc…
▽ More
Self-assembly of soft materials attracts keen interest for patterning applications owing to its ease and spontaneous behavior. We report the fabrication of nanogrooves using sublimation and recondensation of liquid crystal (LC) materials. First, well-aligned smectic LC structures are obtained on the micron-scale topographic patterns of the microchannel; then the sublimation and recondensation process directly produces nanogrooves having sub-200-nm scale. The entire process can be completed in less than 30 min. After it is replicated using an ultraviolet-curable polymer, our platform can be used as an alignment layer to control other guest LC materials.
△ Less
Submitted 25 April, 2016;
originally announced April 2016.
-
Chiral nematic self-assembly of minimally surface damaged chitin nanofibrils and its load bearing functions
Authors:
Dongyeop X. Oh,
Yun Jeong Cha,
Hoang-Linh Nguyen,
Hwa Heon Je,
Yong Seok Jho,
Dong Soo Hwang,
Dong Ki Yoon
Abstract:
Chitin is one of the most abundant biomaterials in nature, with 10^10 tons produced annually as hierarchically organized nanofibril fillers to reinforce the exoskeletons of arthropods. This green and cheap biomaterial has attracted great attention due to its potential application to reinforce biomedical materials. Despite that, its practical use is limited since the extraction of chitin nanofibril…
▽ More
Chitin is one of the most abundant biomaterials in nature, with 10^10 tons produced annually as hierarchically organized nanofibril fillers to reinforce the exoskeletons of arthropods. This green and cheap biomaterial has attracted great attention due to its potential application to reinforce biomedical materials. Despite that, its practical use is limited since the extraction of chitin nanofibrils requires surface modification involving harsh chemical treatments, leading to difficulties in reproducing their natural prototypal hierarchical structure, i.e. chiral nematic phase. Here, we develop a chemical etching-free approach using calcium ions, called natural way, to disintegrate the chitin nanofibrils while kee** the essential moiety for the self-assembly, ultimately resulting in the reproduction of chitins natural chiral structure in a polymeric matrix. This chiral chitin nanostructure exceptionally toughens the composite. Our resultant chiral nematic phase of chitin materials can contribute to the understanding and use of the reinforcing strategy in nature.
△ Less
Submitted 24 March, 2016;
originally announced March 2016.
-
Controlling Gaussian and mean curvatures at microscale by sublimation and condensation of smectic liquid crystals
Authors:
Dae Seok Kim,
Yun Jeong Cha,
Mun Ho Kim,
Oleg D. Lavrentovich,
Dong Ki Yoon
Abstract:
Soft materials with layered structure such as membranes, block copolymers, and smectics exhibit intriguing morphologies with nontrivial curvatures. We report on restructuring the Gaussian and mean curvatures of smectic A films with free surface in the process of sintering, i.e. resha** at elevated temperatures. The pattern of alternating patches of negative, zero, and positive mean curvature of…
▽ More
Soft materials with layered structure such as membranes, block copolymers, and smectics exhibit intriguing morphologies with nontrivial curvatures. We report on restructuring the Gaussian and mean curvatures of smectic A films with free surface in the process of sintering, i.e. resha** at elevated temperatures. The pattern of alternating patches of negative, zero, and positive mean curvature of the air-smectic interface has a profound effect on the rate of sublimation. As a result of sublimation, condensation, and restructuring, initially equilibrium smectic films with negative and zero Gaussian curvature are transformed into structures with pronounced positive Gaussian curvature of layers packing, seldom seen in samples obtained by cooling from the isotropic melt. The observed relationship between the curvatures, bulk elastic behaviour, and interfacial geometries in sintering of smectic liquid crystals paves the way for new approaches to control soft morphologies at micron and submicron scales.
△ Less
Submitted 24 November, 2015;
originally announced November 2015.
-
Interference effect on Raman spectrum of graphene on SiO_2/Si
Authors:
Duhee Yoon,
Hyerim Moon,
Young-Woo Son,
** Sik Choi,
Bae Ho Park,
Young Hun Cha,
Young Dong Kim,
Hyeonsik Cheong
Abstract:
The intensity ratio between two major Raman bands in graphene is one of the most important information for physics of graphene and has been believed to represent various intrinsic properties of graphene without critical assessment of extrinsic effects. We report a micro Raman spectroscopy study on the Raman intensity ratio of the 2D band to the G Raman band of graphene varying the thickness of d…
▽ More
The intensity ratio between two major Raman bands in graphene is one of the most important information for physics of graphene and has been believed to represent various intrinsic properties of graphene without critical assessment of extrinsic effects. We report a micro Raman spectroscopy study on the Raman intensity ratio of the 2D band to the G Raman band of graphene varying the thickness of dielectric layers (SiO_2) underneath it. The ratio is shown to change by almost 370% when the thickness is varied by 60%. The large variation in the ratio is well explained by theoretical calculations considering multiple Raman scattering events at the interfaces. Our analysis shows that the interference effect is critical in extracting the intrinsic 2D to G intensity ratio and therefore must be taken into account in extracting various physical properties of graphene from Raman measurements.
△ Less
Submitted 29 August, 2009;
originally announced August 2009.
-
Sodium Trimer Ordering on NaxCoO2 Surface
Authors:
Woei Wu Pai,
S. H. Huang,
Ying S. Meng,
Y. C. Chao,
C. H. Lin,
H. L. Liu,
F. C. Chou
Abstract:
Sodium ion ordering on in situ cleaved NaxCoO2 (x=0.84) surface has been studied by ultra high vacuum scanning tunneling microscopy (UHV-STM) at room temperature. Three main phases, with p(3x3), (root 7 x root 7), and (2 root 3 x 2 root 3) hexagonal unit cells and surface Na concentration of 1/3, 3/7, 1/2, respectively, were identified. One surprising finding is that Na trimers act as the basic…
▽ More
Sodium ion ordering on in situ cleaved NaxCoO2 (x=0.84) surface has been studied by ultra high vacuum scanning tunneling microscopy (UHV-STM) at room temperature. Three main phases, with p(3x3), (root 7 x root 7), and (2 root 3 x 2 root 3) hexagonal unit cells and surface Na concentration of 1/3, 3/7, 1/2, respectively, were identified. One surprising finding is that Na trimers act as the basic building blocks that order in long range. The stability of Na trimers is attributed to the increased Na coordination with oxygen as indicated by ab initio calculations, and possibly at finite temperature by configuration entropy.
△ Less
Submitted 5 May, 2008;
originally announced May 2008.
