-
How do ionic superdiscs self-assemble in nanopores?
Authors:
Zhuoqing Li,
Aileen R. Raab,
Mohamed A. Kolmangadi,
Mark Busch,
Marco Grunwald,
Felix Demel,
Florian Bertram,
Andriy V. Kityk,
Andreas Schoenhals,
Sabine Laschat,
Patrick Huber
Abstract:
Discotic ionic liquid crystals (DILCs) consist of self-assembled superdiscs of cations and anions that spontaneously stack in linear columns with high one-dimensional ionic and electronic charge mobility, making them prominent model systems for functional soft matter. Unfortunately, a homogeneous alignment of DILCs on the macroscale is often not achievable, which significantly limits their applica…
▽ More
Discotic ionic liquid crystals (DILCs) consist of self-assembled superdiscs of cations and anions that spontaneously stack in linear columns with high one-dimensional ionic and electronic charge mobility, making them prominent model systems for functional soft matter. Unfortunately, a homogeneous alignment of DILCs on the macroscale is often not achievable, which significantly limits their applicability. Infiltration into nanoporous solid scaffolds can in principle overcome this drawback. However, due to the extreme experimental challenges to scrutinise liquid crystalline order in extreme spatial confinement, little is known about the structures of DILCs in nanopores. Here, we present temperature-dependent high-resolution optical birefringence measurement and 3D reciprocal space map** based on synchrotron-based X-ray scattering to investigate the thermotropic phase behaviour of dopamine-based ionic liquid crystals confined in cylindrical channels of 180~nm diameter in macroscopic anodic aluminum oxide (AAO) membranes. As a function of the membranes' hydrophilicity and thus the molecular anchoring to the pore walls (edge-on or face-on) and the variation of the hydrophilic-hydrophobic balance between the aromatic cores and the alkyl side chain motifs of the superdiscs by tailored chemical synthesis, we find a particularly rich phase behaviour, which is not present in the bulk state. It is governed by a complex interplay of liquid crystalline elastic energies (bending and splay deformations), polar interactions and pure geometric confinement, and includes textural transitions between radial and axial alignment of the columns with respect to the long nanochannel axis.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Wafer-scale fabrication of mesoporous silicon functionalized with electrically conductive polymers
Authors:
Manfred May,
Mathis Boderius,
Natalia Gostkowska-Lekner,
Mark Busch,
Klaus Habicht,
Tommy Hofmann,
Patrick Huber
Abstract:
The fabrication of hybrid materials consisting of nanoporous hosts with conductive polymers is a challenging task, since the extreme spatial confinement often conflicts with the stringent physico-chemical requirements for polymerization of organic constituents. Here, several low-threshold and scalable synthesis routes for such hybrids are presented. First, the electrochemical synthesis of composit…
▽ More
The fabrication of hybrid materials consisting of nanoporous hosts with conductive polymers is a challenging task, since the extreme spatial confinement often conflicts with the stringent physico-chemical requirements for polymerization of organic constituents. Here, several low-threshold and scalable synthesis routes for such hybrids are presented. First, the electrochemical synthesis of composites based on mesoporous silicon (pore size of 7 nm) and the polymers PANI, PPy and PEDOT is discussed and validated by scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). Polymer filling degrees of 74% are achieved. Second, the production of PEDOT/pSi hybrids, based on the solid-state polymerization (SSP) of DBEDOT to PEDOT is shown. The resulting amorphous structure of the nanopore-embedded PEDOT is investigated via in-situ synchrotron-based X-ray scattering. In addition, a twofold increase in the electrical conductivity of the hybrid compared to the porous silicon host is shown, making this system particularly promising for thermoelectric applications.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Metal-Organic Chemical Vapor Deposition of PtSe2
Authors:
Maximilian Prechtl,
Marc Busch,
Oliver Hartwig,
Kangho Lee,
Tanja Stimpel-Lindner,
Cormac Ó Coileáin,
Kuanysh Zhussupbekov,
Ainur Zhussupbekova,
Samuel Berman,
Igor V. Shvets,
Georg S. Duesberg
Abstract:
Platinum diselenide (PtSe2), a novel two-dimensional material from the class of noble-metal dichalcogenide (NMD), has recently received significant attention due to its outstanding properties. PtSe2, which undergoes a semi metallic to semiconductor transition when thinned, offers a band-gap in the infrared range and good air stability. These properties make it a prime active material in optoelectr…
▽ More
Platinum diselenide (PtSe2), a novel two-dimensional material from the class of noble-metal dichalcogenide (NMD), has recently received significant attention due to its outstanding properties. PtSe2, which undergoes a semi metallic to semiconductor transition when thinned, offers a band-gap in the infrared range and good air stability. These properties make it a prime active material in optoelectronic and chemical sensing devices. However, a synthesis method that can produce large-scale and reliable high quality PtSe2 is highly sought after. Here, we present PtSe2 growth by metal organic chemical vapor deposition. Films were grown on a variety of centimeter scale substrates and were characterized by Raman, X-ray photoelectron and X-ray diffraction spectroscopy, as well as scanning tunneling microscopy and spectroscopy. Domains within the films are found to be up to several hundred nanometers in size, and atomic scale measurements show their highly ordered crystalline structure. The thickness of homogenous films can be controlled via the growth time. This work provides fundamental guidance for the synthesis and implementation of high quality, large-scale PtSe2 layers, hence offering the key requirement for the implementation of PtSe2 in future electronic devices.
△ Less
Submitted 2 February, 2023; v1 submitted 31 January, 2023;
originally announced January 2023.
-
Ionic liquid dynamics in nanoporous carbon: A pore-size- and temperature-dependent neutron spectroscopy study on supercapacitor materials
Authors:
Mark Busch,
Tommy Hofmann,
Bernhard Frick,
Jan P. Embs,
Boris Dyatkin,
Patrick Huber
Abstract:
The influence of spatial confinement on the thermally excited stochastic cation dynamics of the room-temperature ionic liquid 1-N-butylpyridinium bis-((trifluoromethyl)sulfonyl)imide ([BuPy][Tf_2N]) inside porous carbide-derived carbons with various pore sizes in the sub- to a few nanometer range are investigated by quasi-elastic neutron spectroscopy. Using the potential of fixed window scans, i.e…
▽ More
The influence of spatial confinement on the thermally excited stochastic cation dynamics of the room-temperature ionic liquid 1-N-butylpyridinium bis-((trifluoromethyl)sulfonyl)imide ([BuPy][Tf_2N]) inside porous carbide-derived carbons with various pore sizes in the sub- to a few nanometer range are investigated by quasi-elastic neutron spectroscopy. Using the potential of fixed window scans, i.e. scanning a sample parameter, while observing solely one specific energy transfer value, an overview of the dynamic landscape within a wide temperature range is obtained. It is shown that already these data provide a quite comprehensive understanding of the confinement-induced alteration of the molecular mobility in comparison to the bulk. A complementary, more detailed analysis of full energy transfer spectra at selected temperatures reveals two translational diffusive processes on different time scales. Both are considerably slower than in the bulk liquid and show a decrease of the respective self-diffusion coefficients with decreasing nanopore size. Different thermal activation energies for molecular self-diffusion in nanoporous carbons with similar pore size indicate the importance of pore morphology on the molecular mobility, beyond the pure degree of confinement. In spite of the dynamic slowing down we can show that the temperature range of the liquid state upon nanoconfinement is remarkably extended to much lower temperatures, which is beneficial for potential technical applications of such systems.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Mesoporous alumina- and silica-based crystalline nanocomposites with tailored anisotropy: methodology, structure and properties
Authors:
A. V. Kityk,
A. Andrushchak,
Ya. Shchur,
V. T. Adamiv,
O. Yaremko,
M. Lelonek,
S. A. Vitusevich,
O. Kityk,
R. Wielgosz,
W. Piecek,
M. Busch,
K. Sentker,
P. Huber
Abstract:
We present several recently synthesized nanocomposites consisting of liquid crystals as well as an organic molecular crystal embedded into the nanochannels of mesoporous alumina and silica. As liquid-crystalline mesogens achiral, nematogen and chiral cholesteric guest molecules infiltrated into nanochannels by spontaneous imbibition were chosen. The molecular ordering inside the nanochannels, whic…
▽ More
We present several recently synthesized nanocomposites consisting of liquid crystals as well as an organic molecular crystal embedded into the nanochannels of mesoporous alumina and silica. As liquid-crystalline mesogens achiral, nematogen and chiral cholesteric guest molecules infiltrated into nanochannels by spontaneous imbibition were chosen. The molecular ordering inside the nanochannels, which can be tailored by modifying the surface anchoring, was characterized by optical polarimetry (linear and/or circular birefringence) in combination with X-ray diffraction. For the synthesis of the solid crystalline nanocomposites ferroelectric triglycine sulfate (TGS) nanocrystals were deposited into the nanochannels by slow evaporation of saturated water solutions imbibed into the porous hosts. Their textural and physicochemical properties were explored by x-ray diffraction, scanning electron microscopy and dielectric techniques.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
A ferroelectric liquid crystal confined in cylindrical nanopores: Reversible smectic layer buckling, enhanced light rotation and extremely fast electro-optically active Goldstone excitations
Authors:
Mark Busch,
Andriy V. Kityk,
Wiktor Piecek,
Tommy Hofmann,
Dirk Wallacher,
Sylwia Calus,
Przemyslaw Kula,
Martin Steinhart,
Manfred Eich,
Patrick Huber
Abstract:
The orientational and translational order of a thermotropic ferroelectric liquid crystal (2MBOCBC) imbibed in self-organized, parallel, cylindrical pores with radii of 10, 15, or 20 nm in anodic aluminium oxide monoliths (AAO) are explored by high-resolution linear and circular optical birefringence as well as neutron diffraction texture analysis. The results are compared to experiments on the bul…
▽ More
The orientational and translational order of a thermotropic ferroelectric liquid crystal (2MBOCBC) imbibed in self-organized, parallel, cylindrical pores with radii of 10, 15, or 20 nm in anodic aluminium oxide monoliths (AAO) are explored by high-resolution linear and circular optical birefringence as well as neutron diffraction texture analysis. The results are compared to experiments on the bulk system. The native oxidic pore walls do not provide a stable smectogen wall anchoring. By contrast, a polymeric wall grafting enforcing planar molecular anchoring results in a thermal-history independent formation of smectic C* helices and a reversible chevron-like layer buckling. An enhancement of the optical rotatory power by up to one order of magnitude of the confined compared to the bulk liquid crystal is traced to the pretransitional formation of helical structures at the smectic-A*-to-smectic-C* transformation. A linear electro-optical birefringence effect evidences collective fluctuations in the molecular tilt vector direction along the confined helical superstructures, i.e. the Goldstone phason excitations typical of the para-to-ferroelectric transition. Their relaxation frequencies increase with the square of the inverse pore radii as characteristic of plane-wave excitations and are two orders of magnitude larger than in the bulk, evidencing an exceptionally fast electro-optical functionality of the liquid-crystalline-AAO nanohybrids.
△ Less
Submitted 27 November, 2017;
originally announced November 2017.
-
High-temperature quantum oscillations of the Hall resistance in bulk Bi$_2$Se$_3$
Authors:
Marco Busch,
Olivio Chiatti,
Sergio Pezzini,
Steffen Wiedmann,
Jaime Sánchez-Barriga,
Oliver Rader,
Lada V. Yashina,
Saskia F. Fischer
Abstract:
Helically spin-polarized Dirac fermions (HSDF) in protected topological surface states (TSS) are of high interest as a new state of quantum matter. In three-dimensional (3D) materials with TSS, electronic bulk states often mask the transport properties of HSDF. Recently, the high-field Hall resistance and low-field magnetoresistance indicate that the TSS may coexist with a layered two-dimensional…
▽ More
Helically spin-polarized Dirac fermions (HSDF) in protected topological surface states (TSS) are of high interest as a new state of quantum matter. In three-dimensional (3D) materials with TSS, electronic bulk states often mask the transport properties of HSDF. Recently, the high-field Hall resistance and low-field magnetoresistance indicate that the TSS may coexist with a layered two-dimensional electronic system (2DES). Here, we demonstrate quantum oscillations of the Hall resistance at temperatures up to 50 K in bulk Bi$_2$Se$_3$ with a high electron density $n$ of about $2\!\cdot\!10^{19}$ cm$^{-3}$. From the angular and temperature dependence of the Hall resistance and the Shubnikov-de Haas oscillations we identify 3D and 2D contributions to transport. Angular resolved photoemission spectroscopy proves the existence of TSS. We present a model for Bi$_2$Se$_3$ and suggest that the coexistence of TSS and 2D layered transport stabilizes the quantum oscillations of the Hall resistance.
△ Less
Submitted 28 July, 2017;
originally announced July 2017.
-
Hydraulic Transport Across Hydrophilic and Hydrophobic Nanopores: Flow Experiments with Water and n-Hexane
Authors:
Simon Gruener,
Dirk Wallacher,
Stefanie Greulich,
Mark Busch,
Patrick Huber
Abstract:
We experimentally explore pressure-driven flow of water and n-hexane across nanoporous silica (Vycor glass monoliths with 7 or 10 nm pore diameters, respectively) as a function of temperature and surface functionalization (native and silanized glass surfaces). Hydraulic flow rates are measured by applying hydrostatic pressures via inert gases (argon and helium, pressurized up to 70 bar) on the ups…
▽ More
We experimentally explore pressure-driven flow of water and n-hexane across nanoporous silica (Vycor glass monoliths with 7 or 10 nm pore diameters, respectively) as a function of temperature and surface functionalization (native and silanized glass surfaces). Hydraulic flow rates are measured by applying hydrostatic pressures via inert gases (argon and helium, pressurized up to 70 bar) on the upstream side in a capacitor-based membrane permeability setup. For the native, hydrophilic silica walls, the measured hydraulic permeabilities can be quantitatively accounted for by bulk fluidity provided we assume a sticking boundary layer, i.e. a negative velocity slip length of molecular dimensions. The thickness of this boundary layer is discussed with regard to previous capillarity-driven flow experiments (spontaneous imbibition) and with regard to velocity slippage at the pore walls resulting from dissolved gas. Water flow across the silanized, hydrophobic nanopores is blocked up to a hydrostatic pressure of at least 70 bar. The absence of a sticking boundary layer quantitatively accounts for an enhanced n-hexane permeability in the hydrophobic compared to the hydrophilic nanopores.
△ Less
Submitted 12 December, 2015;
originally announced December 2015.
-
2D layered transport properties from topological insulator Bi$_2$Se$_3$ single crystals and micro flakes
Authors:
Olivio Chiatti,
Christian Riha,
Dominic Lawrenz,
Marco Busch,
Srujana Dusari,
Jaime Sánchez-Barriga,
Anna Mogilatenko,
Lada V. Yashina,
Sergio Valencia,
Akin A. Ünal,
Oliver Rader,
Saskia F. Fischer
Abstract:
Low-field magnetotransport measurements of topological insulators such as Bi$_2$Se$_3$ are important for revealing the nature of topological surface states by quantum corrections to the conductivity, such as weak-antilocalization. Recently, a rich variety of high-field magnetotransport properties in the regime of high electron densities ($\sim10^{19}$ cm$^{-3}$) were reported, which can be related…
▽ More
Low-field magnetotransport measurements of topological insulators such as Bi$_2$Se$_3$ are important for revealing the nature of topological surface states by quantum corrections to the conductivity, such as weak-antilocalization. Recently, a rich variety of high-field magnetotransport properties in the regime of high electron densities ($\sim10^{19}$ cm$^{-3}$) were reported, which can be related to additional two-dimensional layered conductivity, hampering the identification of the topological surface states. Here, we report that quantum corrections to the electronic conduction are dominated by the surface states for a semiconducting case, which can be analyzed by the Hikami-Larkin-Nagaoka model for two coupled surfaces in the case of strong spin-orbit interaction. However, in the metallic-like case this analysis fails and additional two-dimensional contributions need to be accounted for. Shubnikov-de Haas oscillations and quantized Hall resistance prove as strong indications for the two-dimensional layered metallic behavior. Temperature-dependent magnetotransport properties of high-quality Bi$_2$Se$_3$ single crystalline exfoliated macro and micro flakes are combined with high resolution transmission electron microscopy and energy-dispersive x-ray spectroscopy, confirming the structure and stoichiometry. Angle-resolved photoemission spectroscopy proves a single-Dirac-cone surface state and a well-defined bulk band gap in topological insulating state. Spatially resolved core-level photoelectron microscopy demonstrates the surface stability.
△ Less
Submitted 6 June, 2016; v1 submitted 4 December, 2015;
originally announced December 2015.
-
Thermotropic interface and core relaxation dynamics of liquid crystals in silica glass nanochannels: A dielectric spectroscopy study
Authors:
Sylwia Calus,
Lech Borowik,
Andriy V. Kityk,
Manfred Eich,
Mark Busch,
Patrick Huber
Abstract:
We report dielectric relaxation spectroscopy experiments on two rod-like liquid crystals of the cyanobiphenyl family (5CB and 6CB) confined in tubular nanochannels with 7 nm radius and 340 micrometer length in a monolithic, mesoporous silica membrane. The measurements were performed on composites for two distinct regimes of fractional filling: monolayer coverage at the pore walls and complete fill…
▽ More
We report dielectric relaxation spectroscopy experiments on two rod-like liquid crystals of the cyanobiphenyl family (5CB and 6CB) confined in tubular nanochannels with 7 nm radius and 340 micrometer length in a monolithic, mesoporous silica membrane. The measurements were performed on composites for two distinct regimes of fractional filling: monolayer coverage at the pore walls and complete filling of the pores. For the layer coverage a slow surface relaxation dominates the dielectric properties. For the entirely filled channels the dielectric spectra are governed by two thermally-activated relaxation processes with considerably different relaxation rates: A slow relaxation in the interface layer next to the channel walls and a fast relaxation in the core region of the channel filling. The strengths and characteristic frequencies of both relaxation processes have been extracted and analysed as a function of temperature. Whereas the temperature dependence of the static capacitance reflects the effective (average) molecular ordering over the pore volume and is well described within a Landau-de Gennes theory, the extracted relaxation strengths of the slow and fast relaxation processes provide an access to distinct local molecular ordering mechanisms. The order parameter in the core region exhibits a bulk-like behaviour with a strong increase in the nematic ordering just below the paranematic-to-nematic transition temperature T_PN and subsequent saturation during cooling. By contrast, the surface ordering evolves continuously with a kink near T_PN. A comparison of the thermotropic behaviour of the monolayer with the complete filling reveals that the molecular order in the core region of the pore filling affects the order of the peripheral molecular layers at the wall.
△ Less
Submitted 16 August, 2015;
originally announced August 2015.
-
High-resolution dielectric study reveals pore size-dependent orientational order of a discotic liquid crystal confined in tubular nanopores
Authors:
Sylwia Calus,
Andriy V. Kityk,
Lech Borowik,
Ronan Lefort,
Denis Morineau,
Christina Krause,
Andreas Schoenhals,
Mark Busch,
Patrick Huber
Abstract:
We report a high-resolution dielectric study on a pyrene-based discotic liquid crystal (DLC) in the bulk state and confined in parallel tubular nanopores of monolithic silica and alumina membranes. The positive dielectric anisotropy of the DLC molecule at low frequencies (in the quasi-static case) allows us to explore the thermotropic collective orientational order. A face-on arrangement of the mo…
▽ More
We report a high-resolution dielectric study on a pyrene-based discotic liquid crystal (DLC) in the bulk state and confined in parallel tubular nanopores of monolithic silica and alumina membranes. The positive dielectric anisotropy of the DLC molecule at low frequencies (in the quasi-static case) allows us to explore the thermotropic collective orientational order. A face-on arrangement of the molecular discs on the pore walls and a corresponding radial arrangement of the molecules is found. In contrast to the bulk, the isotropic-to-columnar transition of the confined DLC is continuous, shifts with decreasing pore diameter to lower temperatures and exhibits a pronounced hysteresis between cooling and heating. These findings corroborate conclusions from previous neutron and X-ray scattering experiments as well as optical birefringence measurements. Our study also indicates that the relative simple dielectric technique presented here is a quite efficient method in order to study the thermotropic orientational order of DLC based nanocomposites.
△ Less
Submitted 9 July, 2015;
originally announced July 2015.
-
Thermotropic Orientational Order of Discotic Liquid Crystals in Nanochannels: An Optical Polarimetry Study and a Landau-de Gennes Analysis
Authors:
Andriy V. Kityk,
Mark Busch,
Daniel Rau,
Sylwia Calus,
Carole V. Cerclier,
Ronan Lefort,
Denis Morineau,
Harald Bock,
Eric Grelet,
Christina Krause,
Andreas Schoenhals,
Bernhard Frick,
Patrick Huber
Abstract:
Optical polarimetry measurements of the orientational order of a discotic liquid crystal based on a pyrene derivative and confined in parallel-aligned nanochannels of monolithic mesoporous alumina, silica, and silicon as a function of temperature, channel radius (3 - 22 nm) and surface chemistry reveal a competition of radial and axial columnar order. The evolution of the orientational order param…
▽ More
Optical polarimetry measurements of the orientational order of a discotic liquid crystal based on a pyrene derivative and confined in parallel-aligned nanochannels of monolithic mesoporous alumina, silica, and silicon as a function of temperature, channel radius (3 - 22 nm) and surface chemistry reveal a competition of radial and axial columnar order. The evolution of the orientational order parameter of the confined systems is continuous, in contrast to the discontinuous transition in the bulk. For channel radii larger than 10 nm we suggest several, alternative defect structures, which are compatible both with the optical experiments on the collective molecular orientation presented here and with a translational, radial columnar order reported in previous diffraction studies. For smaller channel radii our observations can semi-quantitatively be described by a Landau-de Gennes model with a nematic shell of radially ordered columns (affected by elastic splay deformations) that coexists with an orientationally disordered, isotropic core. For these structures, the cylindrical phase boundaries are predicted to move from the channel walls to the channel centres upon cooling, and vice-versa upon heating, in accord with the pronounced cooling/heating hystereses observed and the scaling behavior of the transition temperatures with channel diameter. The absence of experimental hints of a paranematic state is consistent with a biquadratic coupling of the splay deformations to the order parameter.
△ Less
Submitted 8 April, 2015;
originally announced April 2015.
-
Site-dependence of van der Waals interaction explains exciton spectra of double-walled tubular J-aggregates
Authors:
Jörg Megow,
Merle I. S. Röhr,
Marcel Schmidt am Busch,
Thomas Renger,
Roland Mitrić,
Stefan Kirstein,
Jürgen P. Rabe,
Volkhard May
Abstract:
The simulation of the optical properties of supramolecular aggregates requires the development of methods, which are able to treat a large number of coupled chromophores interacting with the environment. Since it is currently not possible to treat large systems by quantum chemistry, the Frenkel exciton model is a valuable alternative. In this work we show how the Frenkel exciton model can be exten…
▽ More
The simulation of the optical properties of supramolecular aggregates requires the development of methods, which are able to treat a large number of coupled chromophores interacting with the environment. Since it is currently not possible to treat large systems by quantum chemistry, the Frenkel exciton model is a valuable alternative. In this work we show how the Frenkel exciton model can be extended in order to explain the excitonic spectra of a specific double-walled tubular dye aggregate explicitly taking into account dispersive energy shifts of ground and excited states due to van der Waals interaction with all surrounding molecules. The experimentally observed splitting is well explained by the site-dependent energy shift of molecules placed at the inner or outer side of the double-walled tube, respectively. Therefore we can conclude, that inclusion of the site-dependent dispersive effect in the theoretical description of optical properties of nanoscaled dye aggregates is mandatory.
△ Less
Submitted 11 December, 2014;
originally announced December 2014.
-
Paranematic-to-nematic ordering of a binary mixture of rod-like liquid crystals confined in cylindrical nanochannels
Authors:
Sylwia Calus,
Beata Jablonska,
Mark Busch,
Daniel Rau,
Patrick Huber,
Andriy V. Kityk
Abstract:
We explore the optical birefringence of the nematic binary mixtures 6CB$_{1-x}$7CB$_x$ ($0~\le~x~\le~1$) imbibed into parallel-aligned nanochannels of mesoporous alumina and silica membranes for channel radii of $3.4~\le~R~\le 21.0$ nm. The results are compared with the bulk behavior and analyzed with a Landau-de-Gennes model. Depending on the channel radius the nematic ordering in the cylindrical…
▽ More
We explore the optical birefringence of the nematic binary mixtures 6CB$_{1-x}$7CB$_x$ ($0~\le~x~\le~1$) imbibed into parallel-aligned nanochannels of mesoporous alumina and silica membranes for channel radii of $3.4~\le~R~\le 21.0$ nm. The results are compared with the bulk behavior and analyzed with a Landau-de-Gennes model. Depending on the channel radius the nematic ordering in the cylindrical nanochannels evolves either discontinuously (subcritical regime, nematic ordering field $σ<1/2$) or continuously (overcritical regime, $σ>1/2$), but in both cases with a characteristic paranematic precursor behavior. The strength of the ordering field, imposed by the channel walls, and the magnitude of quenched disorder varies linearly with the mole fraction $x$ and scales inversely proportionally with $R$ for channel radii larger than 4 nm. The critical pore radius, $R_c$, separating a continuous from a discontinuous paranematic-to-nematic evolution, varies linearly with $x$ and differs negligibly between the silica and alumina membranes. We find no hints of preferred adsorption of one species at the channels walls. By contrast, a linear variation of the nematic-to-paranematic transition point $T_{\rm PN}$ and of the nematic ordering field $σ$ vs. $x$ suggest that the binary mixtures of cyanobiphenyls 6CB and 7CB keep their homogeneous bulk stoichiometry also in nanoconfinement, at least for channel diameters larger than $\sim$7 nm.
△ Less
Submitted 19 June, 2014;
originally announced June 2014.
-
Thermotropic nematic order upon nano-capillary filling
Authors:
Patrick Huber,
Mark Busch,
Sylwia Calus,
Andriy V. Kityk
Abstract:
Optical birefringence and light absorption measurements reveal four regimes for the thermotropic behavior of a nematogen liquid (7CB) upon sequential filling of parallel-aligned capillaries of 12 nm diameter in a monolithic, mesoporous silica membrane. No molecular reorientation is observed for the first adsorbed monolayer. In the film-condensed state (up to 1 nm thickness) a weak, continuous para…
▽ More
Optical birefringence and light absorption measurements reveal four regimes for the thermotropic behavior of a nematogen liquid (7CB) upon sequential filling of parallel-aligned capillaries of 12 nm diameter in a monolithic, mesoporous silica membrane. No molecular reorientation is observed for the first adsorbed monolayer. In the film-condensed state (up to 1 nm thickness) a weak, continuous paranematic-to-nematic (P-N) transition is found, which is shifted by 10 K below the discontinuous bulk transition at T_IN=305K. The capillary-condensed state exhibits a more pronounced, albeit still continuous P-N reordering, located 4 K below T_IN. This shift vanishes abruptly on complete filling of the capillaries, which we tentatively trace to a 10 MPa tensile pressure release associated with the disappearance of concave menisci in the confined liquid.
△ Less
Submitted 5 April, 2013;
originally announced April 2013.
-
Anomalous magnetic anisotropy of the topmost surface layer of Ni(110)
Authors:
Marco Busch,
Jens Lienemann,
Michael Potthoff,
Helmut Winter
Abstract:
The orientation of the magnetization of a Ni(110) surface was investigated using techniques with different probing depths. By making use of electron capture into excited states of fast He atoms, we found that the magnetization of the topmost surface layer is not aligned along the easy axes of Ni. However, for a 50 ML film Fe on Ni(110) we observed the magnetization of the topmost Fe surface layer…
▽ More
The orientation of the magnetization of a Ni(110) surface was investigated using techniques with different probing depths. By making use of electron capture into excited states of fast He atoms, we found that the magnetization of the topmost surface layer is not aligned along the easy axes of Ni. However, for a 50 ML film Fe on Ni(110) we observed the magnetization of the topmost Fe surface layer is along the easy axes of Fe.
△ Less
Submitted 7 February, 2011;
originally announced February 2011.
