-
Secondary-Structure Phase Formation for Semifelxible Polymers by Bifurcation in Hyperphase Space
Authors:
Dilimulati Aierken,
Michael Bachmann
Abstract:
Canonical analysis has long been the primary analysis method for studies of phase transitions. However, this approach is not sensitive enough if transition signals are too close in temperature space. The recently introduced generalized microcanonical inflection-point analysis method not only enables the systematic identification and classification of transitions in systems of any size, but it can…
▽ More
Canonical analysis has long been the primary analysis method for studies of phase transitions. However, this approach is not sensitive enough if transition signals are too close in temperature space. The recently introduced generalized microcanonical inflection-point analysis method not only enables the systematic identification and classification of transitions in systems of any size, but it can also distinguish transitions that standard canonical analysis cannot resolve. By applying this method to a generic coarse-grained model for semiflexible polymers, we identify a mixed structural phase dominated by secondary structures such as hairpins and loops that originates from a bifurcation in the hyperspace spanned by inverse temperature and bending stiffness. This intermediate phase, which is embraced by the well-known random-coil and toroidal phases, is testimony to the necessity of balancing entropic variability and energetic stability in functional macromolecules under physiological conditions.
△ Less
Submitted 19 November, 2023;
originally announced November 2023.
-
Measurement of the magnetic octupole susceptibility of PrV2Al20
Authors:
Linda Ye,
Matthew E. Sorensen,
Maja D. Bachmann,
Ian R. Fisher
Abstract:
In the electromagnetic multipole expansion, magnetic octupoles are the subsequent order of magnetic multipoles allowed in centrosymmetric systems, following the more commonly observed magnetic dipoles. As order parameters in condensed matter systems, magnetic octupoles have been experimentally elusive. In particular, the lack of simple external fields that directly couple to them makes their exper…
▽ More
In the electromagnetic multipole expansion, magnetic octupoles are the subsequent order of magnetic multipoles allowed in centrosymmetric systems, following the more commonly observed magnetic dipoles. As order parameters in condensed matter systems, magnetic octupoles have been experimentally elusive. In particular, the lack of simple external fields that directly couple to them makes their experimental detection challenging. Here, we demonstrate a methodology for probing the magnetic octupole susceptibility using a product of magnetic field $H_i$ and shear strain $ε_{jk}$ to couple to the octupolar fluctuations, while using an adiabatic elastocaloric effect to probe the response to this composite effective field. We observe a Curie-Weiss behavior in the obtained octupolar susceptibility of \ce{PrV2Al20} up to temperatures approximately forty times the putative octupole ordering temperature. Our results demonstrate the presence of magnetic octupole fluctuations in the particular material system, and more broadly highlight how anisotropic strain can be combined with magnetic fields to formulate a versatile probe to observe otherwise elusive emergent `hidden' electronic orders.
△ Less
Submitted 8 September, 2023;
originally announced September 2023.
-
Atomic-Scale Visualization of a Cascade of Magnetic Orders in the Layered Antiferromagnet $GdTe_{3}$
Authors:
Arjun Raghavan,
Marisa Romanelli,
Julian May-Mann,
Anuva Aishwarya,
Leena Aggarwal,
Anisha G. Singh,
Maja D. Bachmann,
Leslie M. Schoop,
Eduardo Fradkin,
Ian R. Fisher,
Vidya Madhavan
Abstract:
$GdTe_{3}…
▽ More
$GdTe_{3}$ is a layered antiferromagnet which has attracted attention due to its exceptionally high mobility, distinctive unidirectional incommensurate charge density wave (CDW), superconductivity under pressure, and a cascade of magnetic transitions between 7 and 12 K, with as yet unknown order parameters. Here, we use spin-polarized scanning tunneling microscopy to directly image the charge and magnetic orders in $GdTe_{3}$. Below 7 K, we find a striped antiferromagnetic phase with twice the periodicity of the Gd lattice and perpendicular to the CDW. As we heat the sample, we discover a spin density wave with the same periodicity as the CDW between 7 and 12 K; the viability of this phase is supported by our Landau free energy model. Our work reveals the order parameters of the magnetic phases in $GdTe_{3}$ and shows how the interplay between charge and spin can generate a cascade of magnetic orders.
△ Less
Submitted 4 May, 2024; v1 submitted 29 August, 2023;
originally announced August 2023.
-
Evidence for additional third-order transitions in the two-dimensional Ising model
Authors:
Kedkanok Sitarachu,
Michael Bachmann
Abstract:
We employ the microcanonical inflection-point analysis method, developed for the systematic identification and classification of phase transitions in systems of any size, to study the two-dimensional Ising model at various lattice sizes and in the thermodynamic limit. Exact results for the density of states, which were obtained by exact algorithmic computation, provide evidence for higher-order tr…
▽ More
We employ the microcanonical inflection-point analysis method, developed for the systematic identification and classification of phase transitions in systems of any size, to study the two-dimensional Ising model at various lattice sizes and in the thermodynamic limit. Exact results for the density of states, which were obtained by exact algorithmic computation, provide evidence for higher-order transitions in addition to the well-studied second-order ferromagnetic-paramagnetic phase transition. An independent third-order phase transition is identified in the ferromagnetic phase, whereas another third-order transition resides in the paramagnetic phase. The latter is a dependent transition, i.e., it is inevitably associated with the critical transition, but it remains separate from the critical point in the thermodynamic limit. For a deeper insight into the nature of these additional transitions, a detailed analysis of spin clusters is performed.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Exact microcanonical statistical analysis of transition behavior in Ising chains and strips
Authors:
Kedkanok Sitarachu,
Royce K. P. Zia,
Michael Bachmann
Abstract:
Recent analyses of least-sensitive inflection points in derivatives of the microcanonical entropy for the two-dimensional Ising model revealed higher-order transition signals in addition to the well-studied second-order ferromagnetic/paramagnetic phase transition. In this paper, we re-analyze the exact density of states for the one-dimensional Ising chain as well as the strips with widths/lengths…
▽ More
Recent analyses of least-sensitive inflection points in derivatives of the microcanonical entropy for the two-dimensional Ising model revealed higher-order transition signals in addition to the well-studied second-order ferromagnetic/paramagnetic phase transition. In this paper, we re-analyze the exact density of states for the one-dimensional Ising chain as well as the strips with widths/lengths of up to 64/1024 spins, in search of potential transition features. While some transitions begin to emerge as the strip width increases, none are found for the chain, as might be expected.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Emergent Tetragonality in a Fundamentally Orthorhombic Material
Authors:
Anisha G. Singh,
Maja D. Bachmann,
Joshua J. Sanchez,
Akshat Pandey,
Aharon Kapitulnik,
Jong Woo Kim,
Philip J. Ryan,
Steven A. Kivelson,
Ian R. Fisher
Abstract:
Symmetry plays a key role in determining the physical properties of materials. By Neumann's principle, the properties of a material are invariant under the symmetry operations of the space group to which the material belongs. Continuous phase transitions are associated with a spontaneous reduction in symmetry. (For example, the onset of ferromagnetism spontaneously breaks time reversal symmetry.)…
▽ More
Symmetry plays a key role in determining the physical properties of materials. By Neumann's principle, the properties of a material are invariant under the symmetry operations of the space group to which the material belongs. Continuous phase transitions are associated with a spontaneous reduction in symmetry. (For example, the onset of ferromagnetism spontaneously breaks time reversal symmetry.) Much less common are examples where proximity to a continuous phase transition leads to an increase in symmetry. Here, we find an emergent tetragonal symmetry close to an apparent charge density wave (CDW) bicritical point in a fundamentally orthorhombic material, ErTe$_3$, for which the CDW phase transitions are tuned via anisotropic strain. The underlying structure of the material remains orthorhombic for all applied strains, including at the bicritical point, due to a glide plane symmetry in the crystal structure. Nevertheless, the observation of a divergence in the anisotropy of the in-plane elastoresistivity reveals an emergent electronic tetragonality near the bicritical point.
△ Less
Submitted 29 May, 2024; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Impact of bending stiffness on ground-state conformations for semiflexible polymers
Authors:
Dilimulati Aierken,
Michael Bachmann
Abstract:
Many variants of RNA, DNA, and even proteins can be considered semiflexible polymers, where bending stiffness, as a type of energetic penalty, competes with attractive van der Waals forces in structure formation processes. Here, we systematically investigate the effect of the bending stiffness on ground-state conformations of a generic coarse-grained model for semiflexible polymers. This model pos…
▽ More
Many variants of RNA, DNA, and even proteins can be considered semiflexible polymers, where bending stiffness, as a type of energetic penalty, competes with attractive van der Waals forces in structure formation processes. Here, we systematically investigate the effect of the bending stiffness on ground-state conformations of a generic coarse-grained model for semiflexible polymers. This model possesses multiple transition barriers. Therefore, we employ advanced generalized-ensemble Monte Carlo methods to search for the lowest-energy conformations. As the formation of distinct versatile ground-state conformations, including compact globules, rod-like bundles, and toroids, strongly depends on the strength of the bending restraint, we also performed a detailed analysis of contact and distance maps.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Stable intermediate phase of secondary structures for semiflexible polymers
Authors:
Dilimulati Aierken,
Michael Bachmann
Abstract:
Systematic microcanonical inflection-point analysis of precise numerical results obtained in extensive generalized-ensemble Monte Carlo simulations reveals a bifurcation of the coil-globule transition line for polymers with a bending stiffness exceeding a threshold value. The region, enclosed by the toroidal and random-coil phases, is dominated by structures crossing over from hairpins to loops up…
▽ More
Systematic microcanonical inflection-point analysis of precise numerical results obtained in extensive generalized-ensemble Monte Carlo simulations reveals a bifurcation of the coil-globule transition line for polymers with a bending stiffness exceeding a threshold value. The region, enclosed by the toroidal and random-coil phases, is dominated by structures crossing over from hairpins to loops upon lowering the energy. Conventional canonical statistical analysis is not sufficiently sensitive to allow for the identification of these separate phases.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Reply to: Low-frequency quantum oscillations in LaRhIn$_5$: Dirac point or nodal line?
Authors:
Chunyu Guo,
A. Alexandradinata,
Carsten Putzke,
Amelia Estry,
Teng Tu,
Nitesh Kumar,
Feng-Ren Fan,
Shengnan Zhang,
Quansheng Wu,
Oleg V. Yazyev,
Kent R. Shirer,
Maja D. Bachmann,
Hailin Peng,
Eric D. Bauer,
Filip Ronning,
Yan Sun,
Chandra Shekhar,
Claudia Felser,
Philip J. W. Moll
Abstract:
We thank G.P. Mikitik and Yu.V. Sharlai for contributing this note and the cordial exchange about it. First and foremost, we note that the aim of our paper is to report a methodology to diagnose topological (semi)metals using magnetic quantum oscillations. Thus far, such diagnosis has been based on the phase offset of quantum oscillations, which is extracted from a "Landau fan plot". A thorough an…
▽ More
We thank G.P. Mikitik and Yu.V. Sharlai for contributing this note and the cordial exchange about it. First and foremost, we note that the aim of our paper is to report a methodology to diagnose topological (semi)metals using magnetic quantum oscillations. Thus far, such diagnosis has been based on the phase offset of quantum oscillations, which is extracted from a "Landau fan plot". A thorough analysis of the Onsager-Lifshitz-Roth quantization rules has shown that the famous $π$-phase shift can equally well arise from orbital- or spin magnetic moments in topologically trivial systems with strong spin-orbit coupling or small effective masses. Therefore, the "Landau fan plot" does not by itself constitute a proof of a topologically nontrivial Fermi surface. In the paper at hand, we report an improved analysis method that exploits the strong energy-dependence of the effective mass in linearly dispersing bands. This leads to a characteristic temperature dependence of the oscillation frequency which is a strong indicator of nontrivial topology, even for multi-band metals with complex Fermi surfaces. Three materials, Cd$_3$As$_2$, Bi$_2$O$_2$Se and LaRhIn$_5$ served as test cases for this method. Linear band dispersions were detected for Cd$_3$As$_2$, as well as the $F$ $\approx$ 7 T pocket in LaRhIn$_5$.
△ Less
Submitted 12 March, 2023;
originally announced March 2023.
-
Comparison of Conformational Phase Behavior for Flexible and Semiflexible Polymers
Authors:
Dilimulati Aierken,
Michael Bachmann
Abstract:
We employ the recently introduced generalized microcanonical inflection point method for the statistical analysis of phase transitions in flexible and semiflexible polymers and study the impact of the bending stiffness upon the character and order of transitions between random-coil, globules, and pseudocrystalline conformations. The high-accuracy estimates of the microcanonical entropy and its der…
▽ More
We employ the recently introduced generalized microcanonical inflection point method for the statistical analysis of phase transitions in flexible and semiflexible polymers and study the impact of the bending stiffness upon the character and order of transitions between random-coil, globules, and pseudocrystalline conformations. The high-accuracy estimates of the microcanonical entropy and its derivatives required for this study were obtained by extensive replica-exchange Monte Carlo simulations. We observe that the transition behavior into the compact phases changes qualitatively with increasing bending stiffness. Whereas the $Θ$ collapse transition is less affected, the first-order liquid-solid transition characteristic for flexible polymers ceases to exist once bending effects dominate over attractive monomer-monomer interactions.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Elastocaloric signatures of symmetric and antisymmetric strain-tuning of quadrupolar and magnetic phases in DyB2C2
Authors:
Linda Ye,
Yue Sun,
Veronika Sunko,
Joaquin F. Rodriguez-Nieva,
Matthias S. Ikeda,
Thanapat Worasaran,
Matthew E. Sorensen,
Maja D. Bachmann,
Joseph Orenstein,
Ian R. Fisher
Abstract:
The adiabatic elastocaloric effect measures the temperature change of given systems with strain and probes the entropic landscape in the temperature-strain space. In this study we demonstrate that the DC bias strain-dependence of AC elastocaloric effect can be used to decompose the latter into contributions from symmetric (rotation-symmetry-preserving) and antisymmetric (rotation-symmetry-breaking…
▽ More
The adiabatic elastocaloric effect measures the temperature change of given systems with strain and probes the entropic landscape in the temperature-strain space. In this study we demonstrate that the DC bias strain-dependence of AC elastocaloric effect can be used to decompose the latter into contributions from symmetric (rotation-symmetry-preserving) and antisymmetric (rotation-symmetry-breaking) strains, using a tetragonal f-electron system DyB2C2--whose antiferroquadrupolar order locally breaks four-fold rotational site symmetries while globally remaining tetragonal--as a showcase example. We capture the strain evolution of the quadrupolar and magnetic phase transitions in the system using both singularities in the elastocaloric coefficient and its jump at the transitions, and the latter we show follows a modified Ehrenfest relation. We find that antisymmetric strain couples to the underlying order parameter in a bi-quadratic manner in the antiferroquadrupolar (AFQ) phase but in a linear-quadratic manner in the canted antiferromagnetic (CAFM) phase; the contrast is attributed to a preserved (broken) tetragonal symmetry in the AFQ (CAFM) phase, respectively. The broken tetragonal symmetry in the CAFM phase is further supported by elastocaloric strain-hysteresis and observation of two sets of domains with mutually perpendicular principal axes in optical birefringence. Additionally, when the quadrupolar moments are ordered in a staggered fashion, we uncover an elastocaloric response that reflects a quadratic increase of entropy with antisymmetric strain, analogous to the role magnetic field plays for Ising antiferromagnets by promoting pseudospin flips. Our results show that AC elastocaloric effect is a compact and incisive thermodynamic probe into the coupling between electronic degrees of freedom and strain, which can potentially be applied to broader classes of quantum materials.
△ Less
Submitted 22 November, 2022;
originally announced November 2022.
-
Bragg glass signatures in Pd$_x$ErTe$_3$ with X-ray diffraction Temperature Clustering (X-TEC)
Authors:
Krishnanand Mallayya,
Joshua Straquadine,
Matthew Krogstad,
Maja Bachmann,
Anisha Singh,
Raymond Osborn,
Stephan Rosenkranz,
Ian R Fisher,
Eun-Ah Kim
Abstract:
The Bragg glass phase is a nearly perfect crystal with glassy features predicted to occur in vortex lattices and charge density wave systems in the presence of disorder. Detecting it has been challenging despite its sharp theoretical definition in terms of diverging correlation lengths. Here, we present evidence supporting a Bragg glass phase in the systematically disordered charge density wave ma…
▽ More
The Bragg glass phase is a nearly perfect crystal with glassy features predicted to occur in vortex lattices and charge density wave systems in the presence of disorder. Detecting it has been challenging despite its sharp theoretical definition in terms of diverging correlation lengths. Here, we present evidence supporting a Bragg glass phase in the systematically disordered charge density wave material PdxErTe3. We do this using comprehensive x-ray data and a machine learning analysis tool called X-ray temperature clustering, or X-TEC. We establish a diverging correlation length in samples with moderate intercalation over a wide temperature range. To enable this analysis, we introduced a high-throughput measure of inverse correlation length that we call peak spread. The detection of Bragg glass order and the resulting phase diagram advance our understanding of the complex interplay between disorder and fluctuations significantly. Moreover, the use of our analysis technique to target fluctuations through a high-throughput measure of peak spread can revolutionize the study of fluctuations in scattering experiments.
△ Less
Submitted 11 February, 2024; v1 submitted 29 July, 2022;
originally announced July 2022.
-
Controlling superconductivity of CeIrIn$_5$ microstructures by substrate selection
Authors:
Maarten R. van Delft,
Maja D. Bachmann,
Carsten Putzke,
Chunyu Guo,
Joshua A. W. Straquadine,
Eric D. Bauer,
Filip Ronning,
Philip J. W. Moll
Abstract:
Superconductor/metal interfaces are usually fabricated in heterostructures that join these dissimilar materials. A conceptually different approach has recently exploited the strain sensitivity of heavy-fermion superconductors, selectively transforming regions of the crystal into the metallic state by strain gradients. The strain is generated by differential thermal contraction between the sample a…
▽ More
Superconductor/metal interfaces are usually fabricated in heterostructures that join these dissimilar materials. A conceptually different approach has recently exploited the strain sensitivity of heavy-fermion superconductors, selectively transforming regions of the crystal into the metallic state by strain gradients. The strain is generated by differential thermal contraction between the sample and the substrate. Here, we present an improved finite-element model that reliably predicts the superconducting transition temperature in CeIrIn$_5$ even in complex structures. Different substrates are employed to tailor the strain field into the desired shapes. Using this approach, both highly complex and strained as well as strain-free microstructures are fabricated to validate the model. This enables full control over the microscopic strain fields, and forms the basis for more advanced structuring of superconductors as in Josephson junctions.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Second order Zeeman interaction and ferroquadrupolar order in TmVO$_4$
Authors:
I. Vinograd,
K. R. Shirer,
P. Massat,
Z. Wang,
T. Kissikov,
D. Garcia,
M. D. Bachmann,
M. Horvatić,
I. R. Fisher,
N. J. Curro
Abstract:
TmVO$_{4}$ exhibits ferroquadrupolar order of the Tm 4f electronic orbitals at low temperatures, and is a model system for Ising nematicity that can be tuned continuously to a quantum phase transition via magnetic fields along the $c$-axis. Here we present $^{51}$V nuclear magnetic resonance data in magnetic fields perpendicular to the $c$-axis in a single crystal that has been carefully cut by a…
▽ More
TmVO$_{4}$ exhibits ferroquadrupolar order of the Tm 4f electronic orbitals at low temperatures, and is a model system for Ising nematicity that can be tuned continuously to a quantum phase transition via magnetic fields along the $c$-axis. Here we present $^{51}$V nuclear magnetic resonance data in magnetic fields perpendicular to the $c$-axis in a single crystal that has been carefully cut by a plasma focused ion beam to an ellipsoidal shape to minimize the inhomogeneity of the internal demagnetization field. The resulting dramatic increase in spectral resolution enabled us to resolve the anisotropy of the electric field gradient and to measure the magnetic and quadrupolar relaxation channels separately. Perpendicular magnetic fields nominally do not couple to the low energy degrees of freedom, but we find a significant nonlinear contribution for sufficiently large fields that give rise to a rich phase diagram. The in-plane magnetic field can act either as an effective transverse or longitudinal field to the Ising nematic order, depending on the orientation relative to the principle axes of the quadrupole order, and leads to a marked in-plane anisotropy in both relaxation channels. We find that the small in-plane transverse fields initially enhance the ferroquadrupolar ordering temperature but eventually suppress the long-range order. We tentatively ascribe this behavior to the competing effects of field-induced mixing of higher energy crystal field states and the destabilizing effects of field-induced quantum fluctuations.
△ Less
Submitted 10 December, 2021;
originally announced December 2021.
-
Low-symmetry non-local transport in microstructured squares of delafossite metals
Authors:
Philippa H. McGuinness,
Elina Zhakina,
Markus König,
Maja D. Bachmann,
Carsten Putzke,
Philip J. W. Moll,
Seunghyun Khim,
Andrew P. Mackenzie
Abstract:
Intense work studying the ballistic regime of electron transport in two dimensional systems based on semiconductors and graphene had been thought to have established most of the key experimental facts of the field. In recent years, however, new forms of ballistic transport have become accessible in the quasi-two-dimensional delafossite metals, whose Fermi wavelength is a factor of 100 shorter than…
▽ More
Intense work studying the ballistic regime of electron transport in two dimensional systems based on semiconductors and graphene had been thought to have established most of the key experimental facts of the field. In recent years, however, new forms of ballistic transport have become accessible in the quasi-two-dimensional delafossite metals, whose Fermi wavelength is a factor of 100 shorter than those typically studied in the previous work, and whose Fermi surfaces are nearly hexagonal in shape, and therefore strongly faceted. This has some profound consequences for results obtained from the classic ballistic transport experiment of studying bend and Hall resistances in mesoscopic squares fabricated from delafossite single crystals. We observe pronounced anisotropies in bend resistances and even a Hall voltage that is strongly asymmetric in magnetic field. Although some of our observations are non-intuitive at first sight, we show that they can be understood within a non-local Landauer-Büttiker analysis tailored to the symmetries of the square/hexagonal geometries of our combined device/Fermi surface system. Signatures of non-local transport can be resolved for squares of linear dimension of nearly 100 $μ$m, approximately a factor of 15 larger than the bulk mean free path of the crystal from which the device was fabricated.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
Expanding the momentum field of view in angle-resolved photoemission systems with hemispherical analyzers
Authors:
Nicolas Gauthier,
Jonathan A. Sobota,
Heike Pfau,
Alexandre Gauthier,
Hadas Soifer,
Maja D. Bachmann,
Ian R. Fisher,
Zhi-Xun Shen,
Patrick S. Kirchmann
Abstract:
In photoelectron spectroscopy, the measured electron momentum range is intrinsically related to the excitation photon energy. Low photon energies $<10$ eV are commonly encountered in laser-based photoemission and lead to a momentum range that is smaller than the Brillouin zones of most materials. This can become a limiting factor when studying condensed matter with laser-based photoemission. An ad…
▽ More
In photoelectron spectroscopy, the measured electron momentum range is intrinsically related to the excitation photon energy. Low photon energies $<10$ eV are commonly encountered in laser-based photoemission and lead to a momentum range that is smaller than the Brillouin zones of most materials. This can become a limiting factor when studying condensed matter with laser-based photoemission. An additional restriction is introduced by widely used hemispherical analyzers that record only electrons photoemitted in a solid angle set by the aperture size at the analyzer entrance. Here, we present an upgrade to increase the effective solid angle that is measured with a hemispherical analyzer. We achieve this by accelerating the photoelectrons towards the analyzer with an electric field that is generated by a bias voltage on the sample. Our experimental geometry is comparable to a parallel plate capacitor and, therefore, we approximate the electric field to be uniform along the photoelectron trajectory. With this assumption, we developed an analytic, parameter-free model that relates the measured angles to the electron momenta in the solid and verify its validity by comparing with experimental results on the charge density wave material TbTe$_3$. By providing a larger field of view in momentum space, our approach using a bias potential considerably expands the flexibility of laser-based photoemission setups.
△ Less
Submitted 16 December, 2021; v1 submitted 19 August, 2021;
originally announced August 2021.
-
Layered Metals as Polarized Transparent Conductors
Authors:
Carsten Putzke,
Chunyu Guo,
Vincent Plisson,
Martin Kroner,
Thibault Chervy,
Matteo Simoni,
Pim Wevers,
Maja D. Bachmann,
John R. Cooper,
Antony Carrington,
Naoki Kikugawa,
Jennifer Fowlie,
Stefano Gariglio,
Andrew P. Mackenzie,
Kenneth S. Burch,
Ataç Îmamoğlu,
Philip J. W. Moll
Abstract:
The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conductivity have large carrier densities that push the plasma edge into the ultra-violet range. Transparent conductors are compromises between electric…
▽ More
The quest to improve transparent conductors balances two key goals: increasing electrical conductivity and increasing optical transparency. To improve both simultaneously is hindered by the physical limitation that good metals with high electrical conductivity have large carrier densities that push the plasma edge into the ultra-violet range. Transparent conductors are compromises between electrical conductivity, requiring mobile electrons, and optical transparency based on immobile charges to avoid screening of visible light. Technological solutions reflect this trade-off, achieving the desired transparencies by reducing the conductor thickness or carrier density at the expense of a lower conductance. Here we demonstrate that highly anisotropic crystalline conductors offer an alternative solution, avoiding this compromise by separating the directions of conduction and transmission. Materials with a quasi-two-dimensional electronic structure have a plasma edge well below the range of visible light while maintaining excellent in-plane conductivity. We demonstrate that slabs of the layered oxides Sr$_2$RuO$_4$ and Tl$_2$Ba$_2$CuO$_{6+δ}$ are optically transparent even at macroscopic thicknesses >2$μ$m for c-axis polarized light. Underlying this observation is the fabrication of out-of-plane slabs by focused ion beam milling. This work provides a glimpse into future technologies, such as highly polarized and addressable optical screens, that advancements in a-axis thin film growth will enable.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Directional ballistic transport in the two-dimensional metal PdCoO2
Authors:
Maja D. Bachmann,
Aaron L. Sharpe,
Arthur W. Barnard,
Carsten Putzke,
Thomas Scaffidi,
Nabhanila Nandi,
Seunghyun Khim,
Markus Koenig,
David Goldhaber- Gordon,
Andrew P. Mackenzie,
Philip J. W. Moll
Abstract:
In an idealized infinite crystal, the material properties are constrained by the symmetries of its unit cell. Naturally, the point-group symmetry is broken by the sample shape of any finite crystal, yet this is commonly unobservable in macroscopic metals. To sense the shape-induced symmetry lowering in such metals, long-lived bulk states originating from anisotropic Fermi surfaces are needed. Here…
▽ More
In an idealized infinite crystal, the material properties are constrained by the symmetries of its unit cell. Naturally, the point-group symmetry is broken by the sample shape of any finite crystal, yet this is commonly unobservable in macroscopic metals. To sense the shape-induced symmetry lowering in such metals, long-lived bulk states originating from anisotropic Fermi surfaces are needed. Here we show how strongly facetted Fermi surfaces and long quasiparticle mean free paths present in microstructures of PdCoO2 yield an in-plane resistivity anisotropy that is forbidden by symmetry on an infinite hexagonal lattice. Bar shaped transport devices narrower than the mean free path are carved from single crystals using focused ion beam (FIB) milling, such that the ballistic charge carriers at low temperatures frequently collide with both sidewalls defining a channel. Two symmetry-forbidden transport signatures appear: the in-plane resistivity anisotropy exceeds a factor of 2, and transverse voltages appear in zero magnetic field. We robustly identify the channel direction as the source of symmetry breaking via ballistic Monte- Carlo simulations and numerical solution of the Boltzmann equation.
△ Less
Submitted 1 March, 2021;
originally announced March 2021.
-
Scanning SQUID microscopy in a cryogen-free dilution refrigerator
Authors:
D. Low,
G. M. Ferguson,
Alexander Jarjour,
Brian T. Schaefer,
Maja D. Bachmann,
Philip J. W. Moll,
Katja C. Nowack
Abstract:
We report a scanning superconducting quantum interference device (SQUID) microscope in a cryogen-free dilution refrigerator with a base temperature at the sample stage of at least 30 mK. The microscope is rigidly mounted to the mixing chamber plate to optimize thermal anchoring of the sample. The microscope housing fits into the bore of a superconducting vector magnet, and our design accommodates…
▽ More
We report a scanning superconducting quantum interference device (SQUID) microscope in a cryogen-free dilution refrigerator with a base temperature at the sample stage of at least 30 mK. The microscope is rigidly mounted to the mixing chamber plate to optimize thermal anchoring of the sample. The microscope housing fits into the bore of a superconducting vector magnet, and our design accommodates a large number of wires connecting the sample and sensor. Through a combination of vibration isolation in the cryostat and a rigid microscope housing, we achieve relative vibrations between the SQUID and sample that allow us to image with micrometer resolution over a 150 $μ$m range while the sample stage temperature remains at base temperature. To demonstrate the capabilities of our system, we show images acquired simultaneously of the static magnetic field, magnetic susceptibility, and magnetic fields produced by a current above a superconducting micrometer-scale device.
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Anomalous thermal transport and violation of Wiedemann-Franz law in the critical regime of a charge density wave transition
Authors:
Erik D. Kountz,
Jiecheng Zhang,
Joshua A. W. Straquadine,
Anisha G. Singh,
Maja D. Bachmann,
Ian R. Fisher,
Steven A. Kivelson,
Aharon Kapitulnik
Abstract:
ErTe$_3$ is studied as a model system to explore thermal transport in a layered charge density wave (CDW) material. We present data from thermal diffusivity, resistivity, and specific heat measurements: There is a sharp decrease in thermal conductivity both parallel and perpendicular to the primary CDW at the CDW transition temperature. At the same time, the resistivity changes more gradually. Cor…
▽ More
ErTe$_3$ is studied as a model system to explore thermal transport in a layered charge density wave (CDW) material. We present data from thermal diffusivity, resistivity, and specific heat measurements: There is a sharp decrease in thermal conductivity both parallel and perpendicular to the primary CDW at the CDW transition temperature. At the same time, the resistivity changes more gradually. Correspondingly, while well above and below $T_c$, a consistent description of the thermal transport applies with essentially independent electron and phonon contributions (estimated using the Wiedemann Franz law), in the critical regime no such description is possible; the observed behavior corresponds to a strongly coupled electron-phonon critical `soup.'
△ Less
Submitted 30 December, 2020;
originally announced December 2020.
-
Scale-invariant magnetic anisotropy in RuCl$_3$ at high magnetic fields
Authors:
K. A. Modic,
Ross D. McDonald,
J. P. C. Ruff,
Maja D. Bachmann,
You Lai,
Johanna C. Palmstrom,
David Graf,
Mun Chan,
F. F. Balakirev,
J. B. Betts,
G. S. Boebinger,
Marcus Schmidt,
D. A. Sokolov,
Philip J. W. Moll,
B. J. Ramshaw,
Arkady Shekhter
Abstract:
In RuCl$_3$, inelastic neutron scattering and Raman spectroscopy reveal a continuum of non-spin-wave excitations that persists to high temperature, suggesting the presence of a spin liquid state on a honeycomb lattice. In the context of the Kitaev model, magnetic fields introduce finite interactions between the elementary excitations, and thus the effects of high magnetic fields - comparable to th…
▽ More
In RuCl$_3$, inelastic neutron scattering and Raman spectroscopy reveal a continuum of non-spin-wave excitations that persists to high temperature, suggesting the presence of a spin liquid state on a honeycomb lattice. In the context of the Kitaev model, magnetic fields introduce finite interactions between the elementary excitations, and thus the effects of high magnetic fields - comparable to the spin exchange energy scale - must be explored. Here we report measurements of the magnetotropic coefficient - the second derivative of the free energy with respect to magnetic field orientation - over a wide range of magnetic fields and temperatures. We find that magnetic field and temperature compete to determine the magnetic response in a way that is independent of the large intrinsic exchange interaction energy. This emergent scale-invariant magnetic anisotropy provides evidence for a high degree of exchange frustration that favors the formation of a spin liquid state in RuCl$_3$.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Phase Transitions in the Two-Dimensional Ising Model from the Microcanonical Perspective
Authors:
Kedkanok Sitarachu,
Michael Bachmann
Abstract:
The continuous ferromagnetic-paramagnetic phase transition in the two-dimensional Ising model has already been excessively studied by conventional canonical statistical analysis in the past. We use the recently developed generalized microcanonical inflection-point analysis method to investigate the least-sensitive inflection points of the microcanonical entropy and its derivatives to identify tran…
▽ More
The continuous ferromagnetic-paramagnetic phase transition in the two-dimensional Ising model has already been excessively studied by conventional canonical statistical analysis in the past. We use the recently developed generalized microcanonical inflection-point analysis method to investigate the least-sensitive inflection points of the microcanonical entropy and its derivatives to identify transition signals. Surprisingly, this method reveals that there are potentially two additional transitions for the Ising system besides the critical transition.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Probing intraband excitations in ZrTe$_5$: a high-pressure infrared and transport study
Authors:
D. Santos-Cottin,
M. Padlewski,
E. Martino,
S. Ben David,
F. Le Mardele,
M. Bachmann,
C. Putzke,
P. J. W. Moll,
R. D. Zhong,
G. D. Gu,
H. Berger,
M. Orlita,
C. C. Homes,
Z. Rukelj,
Ana Akrap
Abstract:
Zirconium pentatetelluride, ZrTe5, shows remarkable sensitivity to hydrostatic pressure. In this work we address the high-pressure transport and optical properties of this compound, on samples grown by flux and charge vapor transport. The high-pressure resistivity is measured up to 2 GPa, and the infrared transmission up to 9 GPa. The dc conductivity anisotropy is determined using a microstructure…
▽ More
Zirconium pentatetelluride, ZrTe5, shows remarkable sensitivity to hydrostatic pressure. In this work we address the high-pressure transport and optical properties of this compound, on samples grown by flux and charge vapor transport. The high-pressure resistivity is measured up to 2 GPa, and the infrared transmission up to 9 GPa. The dc conductivity anisotropy is determined using a microstructured sample. Together, the transport and optical measurements allow us to discern band parameters with and without the hydrostatic pressure, in particular the Fermi level, and the effective mass in the less conducting, out-of-plane direction. The results are interpreted within a simple two-band model characterized by a Dirac-like, linear in-plane band dispersion, and a parabolic out-of-plane dispersion.
△ Less
Submitted 19 December, 2019; v1 submitted 2 December, 2019;
originally announced December 2019.
-
Smart Polymeric Recognition of a Hexagonal Monolayer
Authors:
Benjamin Liewehr,
Michael Bachmann
Abstract:
We investigate the adsorption of a flexible polymer at a hexagonally patterned monolayer. All conformational polymer phases are identified, which enables the construction of a hyperphase diagram, parameterized by temperature and monolayer adsorption strength. The energy scale associated with the adsorption strength is a material parameter of the hybrid system that generically accommodates the beha…
▽ More
We investigate the adsorption of a flexible polymer at a hexagonally patterned monolayer. All conformational polymer phases are identified, which enables the construction of a hyperphase diagram, parameterized by temperature and monolayer adsorption strength. The energy scale associated with the adsorption strength is a material parameter of the hybrid system that generically accommodates the behavior of entire classes of polymers interacting with hexagonal substrates. We also discuss a bridge-building mechanism for the formation of unique layered polymer structures with potential for applications in nanoscale transport. High-quality data sets necessary for the statistical analysis of the structural phase behavior of the system were obtained in extensive generalized-ensemble Monte Carlo computer simulations.
△ Less
Submitted 1 December, 2019;
originally announced December 2019.
-
Orbital effect and weak localization physics in the longitudinal magnetoresistance of the Weyl semimetals NbP, NbAs, TaP and TaAs
Authors:
M. Naumann,
F. Arnold,
M. D. Bachmann,
K. A. Modic,
P. J. W. Moll,
V. Süß,
M. Schmidt,
E. Hassinger
Abstract:
Weyl semimetals such as the TaAs family (TaAs, TaP, NbAs, NbP) host quasiparticle excitations resembling the long sought after Weyl fermions at special band-crossing points in the band structure denoted as Weyl nodes. They are predicted to exhibit a negative longitudinal magnetoresistance (LMR) due to the chiral anomaly if the Fermi energy is sufficiently close to the Weyl points. However, current…
▽ More
Weyl semimetals such as the TaAs family (TaAs, TaP, NbAs, NbP) host quasiparticle excitations resembling the long sought after Weyl fermions at special band-crossing points in the band structure denoted as Weyl nodes. They are predicted to exhibit a negative longitudinal magnetoresistance (LMR) due to the chiral anomaly if the Fermi energy is sufficiently close to the Weyl points. However, current jetting effects, i.e. current inhomogeneities caused by a strong, field-induced conductivity anisotropy in semimetals, have a similar experimental signature and therefore have hindered a determination of the intrinsic LMR in the TaAs family so far. This work investigates the longitudinal magnetoresistance of all four members of this family along the crystallographic $a$ and $c$ direction. Our samples are of similar quality as those previously studied in the literature and have a similar chemical potential as indicated by matching quantum oscillation (QO) frequencies. Care was taken to ensure homogeneous currents in all measurements. As opposed to previous studies where this was not done, we find a positive LMR that saturates in fields above 4 T in TaP, NbP and NbAs for $B||c$. Using Fermi-surface geometries from band structure calculations that had been confirmed by experiment, we show that this is the behaviour expected from a classical purely orbital effect, independent on the distance of the Weyl node to the Fermi energy. The TaAs family of compounds is the first to show such a simple LMR without apparent influences of scattering anisotropy. In configurations where the orbital effect is small, i.e. for $B||a$ in NbAs and NbP, we find a non-monotonous LMR including regions of negative LMR. We discuss a weak antilocalisation scenario as an alternative interpretation than the chiral anomaly for these results, since it can fully account for the overall field dependence.
△ Less
Submitted 12 November, 2019;
originally announced November 2019.
-
Temperature dependence of quantum oscillations from non-parabolic dispersions
Authors:
Chunyu Guo,
A. Alexandradinata,
Carsten Putzke,
Amelia Estry,
Teng Tu,
Nitesh Kumar,
Feng-Ren Fan,
Shengnan Zhang,
Quansheng Wu,
Oleg V. Yazyev,
Kent R. Shirer,
Maja D. Bachmann,
Hailin Peng,
Eric D. Bauer,
Filip Ronning,
Yan Sun,
Chandra Shekhar,
Claudia Felser,
Philip J. W. Moll
Abstract:
The phase offset of quantum oscillations is commonly used to experimentally diagnose topologically non-trivial Fermi surfaces. This methodology, however, is inconclusive for spin-orbit-coupled metals where $π$-phase-shifts can also arise from non-topological origins. Here, we show that the linear dispersion in topological metals leads to a $T^2$-temperature correction to the oscillation frequency…
▽ More
The phase offset of quantum oscillations is commonly used to experimentally diagnose topologically non-trivial Fermi surfaces. This methodology, however, is inconclusive for spin-orbit-coupled metals where $π$-phase-shifts can also arise from non-topological origins. Here, we show that the linear dispersion in topological metals leads to a $T^2$-temperature correction to the oscillation frequency that is absent for parabolic dispersions. We confirm this effect experimentally in the Dirac semi-metal Cd$_3$As$_2$ and the multiband Dirac metal LaRhIn$_5$. Both materials match a tuning-parameter-free theoretical prediction, emphasizing their unified origin. For topologically trivial Bi$_2$O$_2$Se, no frequency shift associated to linear bands is observed as expected. However, the $π$-phase shift in Bi$_2$O$_2$Se would lead to a false positive in a Landau-fan plot analysis. Our frequency-focused methodology does not require any input from ab-initio calculations, and hence is promising for identifying correlated topological materials.
△ Less
Submitted 27 March, 2022; v1 submitted 16 October, 2019;
originally announced October 2019.
-
Persistent antiferromagnetic order in heavily overdoped Ca$_{1-x}$La$_x$FeAs$_2$
Authors:
Edoardo Martino,
Maja D. Bachmann,
Lidia Rossi,
Kimberly A. Modic,
Ivica Zivkovic,
Henrik M. Rønnow,
Philip J. W. Moll,
Ana Akrap,
László Forró,
Sergiy Katrych
Abstract:
In the Ca$_{1-x}$La$_x$FeAs$_2$ (112) family of pnictide superconductors, we have investigated a highly overdoped composition (x = 0.56), prepared by high-pressure, high-temperature synthesis. Magnetic measurements show an antiferromagnetic transition at TN = 120K, well above the one at lower do** (0.15 < x < 0.27). Below the onset of long-range magnetic order at TN, the electrical resistivity i…
▽ More
In the Ca$_{1-x}$La$_x$FeAs$_2$ (112) family of pnictide superconductors, we have investigated a highly overdoped composition (x = 0.56), prepared by high-pressure, high-temperature synthesis. Magnetic measurements show an antiferromagnetic transition at TN = 120K, well above the one at lower do** (0.15 < x < 0.27). Below the onset of long-range magnetic order at TN, the electrical resistivity is strongly reduced and is dominated by electron-electron interactions, as evident from its temperature dependence. The Seebeck coefficient shows a clear metallic behavior as in narrow band conductors. The temperature dependence of the Hall coefficient and the violation of Kohler's rule agree with the multiband character of the material. No superconductivity was observed down to 1.8 K. The success of the high-pressure synthesis encourages further investigations of the so far only partially explored phase diagram in this family of Iron-based high temperature superconductors.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
$h/e$ Oscillations in Interlayer Transport of Delafossites
Authors:
Carsten Putzke,
Maja D. Bachmann,
Philippa McGuinness,
Elina Zhakina,
Veronika Sunko,
Marcin Konczykowski,
Takashi Oka,
Roderich Moessner,
Ady Stern,
Markus König,
Seunghyun Khim,
Andrew P. Mackenzie,
Philip J. W. Moll
Abstract:
Transport of electrons in a bulk metal is usually well captured by their particle-like aspects, while their wave-like nature is commonly harder to observe. Microstructures can be are fully designed to reveal the quantum phase, for example mesoscopic metal rings resembling interferometers. Here we report a new type of phase coherent oscillation of the out-of-plane magnetoresistance in the layered d…
▽ More
Transport of electrons in a bulk metal is usually well captured by their particle-like aspects, while their wave-like nature is commonly harder to observe. Microstructures can be are fully designed to reveal the quantum phase, for example mesoscopic metal rings resembling interferometers. Here we report a new type of phase coherent oscillation of the out-of-plane magnetoresistance in the layered delafossites PdCoO$_2$ and PtCoO$_2$. The oscillation period is equivalent to that determined by the magnetic flux quantum, $h/e$, threading an area defined by the atomic interlayer separation and the sample width. The phase of the electron wave function in these crystals appears remarkably robust over macroscopic length scales exceeding 10$μ$m and persisting up to elevated temperatures of $T$>50K. We show that, while the experimental signal cannot be explained in a standard Aharonov-Bohm analysis, it arises due to periodic field-modulation of the out-of-plane hop**. These results demonstrate extraordinary single-particle quantum coherence lengths in the delafossites, and identify a new form of quantum interference in solids.
△ Less
Submitted 7 January, 2020; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Super-geometric electron focusing on the hexagonal Fermi surface of PdCoO$_2$
Authors:
Maja D. Bachmann,
Aaron L. Sharpe,
Arthur W. Barnard,
Carsten Putzke,
Markus König,
Seunghyun Khim,
David Goldhaber-Gordon,
Andrew P. Mackenzie,
Philip J. W. Moll
Abstract:
Geometric electron optics may be implemented in solid state when transport is ballistic on the length scale of a device. Currently, this is realized mainly in 2D materials characterized by circular Fermi surfaces. Here we demonstrate that the nearly perfectly hexagonal Fermi surface of PdCoO2 gives rise to highly directional ballistic transport. We probe this directional ballistic regime in a sing…
▽ More
Geometric electron optics may be implemented in solid state when transport is ballistic on the length scale of a device. Currently, this is realized mainly in 2D materials characterized by circular Fermi surfaces. Here we demonstrate that the nearly perfectly hexagonal Fermi surface of PdCoO2 gives rise to highly directional ballistic transport. We probe this directional ballistic regime in a single crystal of PdCoO2 by use of focused ion beam (FIB) micro-machining, defining crystalline ballistic circuits with features as small as 250nm. The peculiar hexagonal Fermi surface naturally leads to electron self-focusing effects in a magnetic field, well below the geometric limit associated with a circular Fermi surface. This super-geometric focusing can be quantitatively predicted for arbitrary device geometry, based on the hexagonal cyclotron orbits appearing in this material. These results suggest a novel class of ballistic electronic devices exploiting the unique transport characteristics of strongly faceted Fermi surfaces.
△ Less
Submitted 11 February, 2019;
originally announced February 2019.
-
Influence of Bonded Interactions on Structural Phases of Flexible Polymers
Authors:
Kai Qi,
Benjamin Liewehr,
Tomas Koci,
Busara Pattanasiri,
Matthew J. Williams,
Michael Bachmann
Abstract:
We introduce a novel coarse-grained bead-spring model for flexible polymers to systematically examine the effects of an adjusted bonded potential on the formation and stability of structural macrostates in a thermal environment. The density of states obtained in advanced replica-exchange Monte Carlo simulations is analyzed by employing the recently developed generalized microcanonical inflection-p…
▽ More
We introduce a novel coarse-grained bead-spring model for flexible polymers to systematically examine the effects of an adjusted bonded potential on the formation and stability of structural macrostates in a thermal environment. The density of states obtained in advanced replica-exchange Monte Carlo simulations is analyzed by employing the recently developed generalized microcanonical inflection-point analysis method, which enables the identification of diverse structural phases and the construction of a suitably parameterized hyperphase diagram. It reveals that icosahedral phases dominate for polymers with asymmetric and narrow bond potentials, whereas polymers with symmetric and more elastic bonds tend to form amorphous structures with non-icosahedral cores. We also observe a hierarchy in the freezing transition behavior associated with the formation of the surface layer after nucleation.
△ Less
Submitted 7 February, 2019;
originally announced February 2019.
-
Scale-Invariance of a Spin Liquid in High Magnetic Fields
Authors:
K. A. Modic,
Ross D. McDonald,
J. P. C. Ruff,
Maja D. Bachmann,
You Lai,
Johanna C. Palmstrom,
David Graf,
Mun Chan,
F. F. Balakirev,
J. B. Betts,
G. S. Boebinger,
Marcus Schmidt,
D. A. Sokolov,
Philip J. W. Moll,
B. J. Ramshaw,
Arkady Shekhter
Abstract:
In RuCl$_3$, inelastic neutron scattering and Raman spectroscopy reveal a continuum of non-spin-wave excitations that persists to high temperature, suggesting the presence of a spin liquid state on a honeycomb lattice. In the context of the Kitaev model, magnetic fields introduce finite interactions between the elementary excitations, and thus the effects of high magnetic fields - comparable to th…
▽ More
In RuCl$_3$, inelastic neutron scattering and Raman spectroscopy reveal a continuum of non-spin-wave excitations that persists to high temperature, suggesting the presence of a spin liquid state on a honeycomb lattice. In the context of the Kitaev model, magnetic fields introduce finite interactions between the elementary excitations, and thus the effects of high magnetic fields - comparable to the spin exchange energy scale - must be explored. Here we report measurements of the magnetotropic coefficient - the second derivative of the free energy with respect to magnetic field orientation - over a wide range of magnetic fields and temperatures. We find that magnetic field and temperature compete to determine the magnetic response in a way that is independent of the large intrinsic exchange interaction energy. This emergent scale-invariant magnetic anisotropy provides evidence for a high degree of exchange frustration that favors the formation of a spin liquid state in RuCl$_3$.
△ Less
Submitted 12 May, 2020; v1 submitted 26 January, 2019;
originally announced January 2019.
-
Dirac fermions in the heavy-fermion superconductors Ce(Co,Rh,Ir)In$_5$
Authors:
Kent R. Shirer,
Yan Sun,
Maja D. Bachmann,
Carsten Putzke,
Toni Helm,
Laurel E. Winter,
Fedor F. Balakirev,
Ross D. McDonald,
James G. Analytis,
Nityan L. Nair,
Eric D. Bauer,
Filip Ronning,
Claudia Felser,
Tobias Meng,
Binghai Yan,
Philip J. W. Moll
Abstract:
The Ce(Co,Rh,Ir)In$_5$ family of ``Ce-115'' materials hosts an abundance of correlated electron behavior, including heavy-fermion physics, magnetism, superconductivity and nematicity. The complicated behavior of these entangled phenomena leads to a variety of exotic physical properties, which, despite the seemingly simple crystal structure of these compounds, remain poorly understood. It is genera…
▽ More
The Ce(Co,Rh,Ir)In$_5$ family of ``Ce-115'' materials hosts an abundance of correlated electron behavior, including heavy-fermion physics, magnetism, superconductivity and nematicity. The complicated behavior of these entangled phenomena leads to a variety of exotic physical properties, which, despite the seemingly simple crystal structure of these compounds, remain poorly understood. It is generally accepted that the interplay between the itinerant and local character of Ce-$4f$ electrons is the key to their exotic behavior. Here, we report theoretical evidence that the Ce-115 materials are also topological semi-metals, with Dirac fermions around well-separated nodes. Dirac nodes in each compound are present on the $Γ-Z$ plane close to the Fermi level. As the Dirac bands are derived from In-orbitals, they occur in all family members irrespective of the transition metal (Co,Rh,Ir). We present the expected Fermi-arc surface state patterns and show the close proximity of a topological Lifshitz transition, which possibly explains the high field physics of Ce-115 materials. Experimentally, we highlight the surprising similarity of Ce(Co,Rh,Ir)In$_5$ in high magnetic fields, despite the distinctly different states of the Ce-$4f$ electrons. These results raise questions about the role Dirac fermions play in exotic transport behavior, and we propose this class of materials as a prime candidate for unconventional topological superconductivity.
△ Less
Submitted 1 August, 2018;
originally announced August 2018.
-
Spatially modulated heavy-fermion superconductivity in CeIrIn5
Authors:
Maja D. Bachmann,
G. M. Ferguson,
Florian Theuss,
Tobias Meng,
Carsten Putzke,
Toni Helm,
K. R. Shirer,
You-Sheng Li,
K. A. Modic,
Michael Nicklas,
Markus Koenig,
D. Low,
Sayak Ghosh,
Andrew P. Mackenzie,
Frank Arnold,
Elena Hassinger,
Ross D. McDonald,
Laurel E. Winter,
Eric D. Bauer,
Filip Ronning,
B. J. Ramshaw,
Katja C. Nowack,
Philip J. W. Moll
Abstract:
The ability to spatially modulate the electronic properties of solids has led to landmark discoveries in condensed matter physics as well as new electronic applications. Although crystals of strongly correlated metals exhibit a diverse set of electronic ground states, few approaches to spatially modulating their properties exist. Here we demonstrate spatial control over the superconducting state i…
▽ More
The ability to spatially modulate the electronic properties of solids has led to landmark discoveries in condensed matter physics as well as new electronic applications. Although crystals of strongly correlated metals exhibit a diverse set of electronic ground states, few approaches to spatially modulating their properties exist. Here we demonstrate spatial control over the superconducting state in mesoscale samples of the canonical heavy-fermion superconductor CeIrIn5. We use a focused ion beam (FIB) to pattern crystals on the microscale, which tailors the strain induced by differential thermal contraction into specific areas of the device. The resulting non-uniform strain fields induce complex patterns of superconductivity due to the strong dependence of the transition temperature on the strength and direction of strain. Electrical transport and magnetic imaging of devices with different geometry show that the obtained spatial modulation of superconductivity agrees with predictions based on finite element simulations. These results present a generic approach to manipulating electronic order on micrometer length scales in strongly correlated matter.
△ Less
Submitted 21 September, 2018; v1 submitted 13 July, 2018;
originally announced July 2018.
-
Adsorption of flexible polymer chains on a surface: Effects of different solvent conditions
Authors:
P. H. L. Martins,
J. A. Plascak,
M. Bachmann
Abstract:
Polymer chains undergoing a continuous adsorption-desorption transition are studied through extensive computer simulations. A three-dimensional self-avoiding walk lattice model of a polymer chain grafted onto a surface has been treated for different solvent conditions. We have used an advanced contact-density chain-growth algorithm, in which the density of contacts can be directly obtained. From t…
▽ More
Polymer chains undergoing a continuous adsorption-desorption transition are studied through extensive computer simulations. A three-dimensional self-avoiding walk lattice model of a polymer chain grafted onto a surface has been treated for different solvent conditions. We have used an advanced contact-density chain-growth algorithm, in which the density of contacts can be directly obtained. From this quantity, the order parameter and its fourth-order Binder cumulant are computed, as well as the corresponding critical exponents and the adsorption-desorption transition temperature. As the number of configurations with a given number of surface contacts and monomer-monomer contacts is independent of the temperature and solvent conditions, it can be easily applied to get results for different solvent parameter values without the need of any extra simulations. In analogy to continuous magnetic phase transitions, finite-size-scaling methods have been employed. Quite good results for the critical properties and phase diagram of very long single polymer chains have been obtained by properly taking into account the effects of corrections to scaling. The study covers all solvent effects, going from the limit of {\it super-self-avoiding walks}, characterized by effective monomer-monomer repulsion, to poor solvent conditions that enable the formation of compact polymer structures.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
Classification of Phase Transitions by Microcanonical Inflection-Point Analysis
Authors:
Kai Qi,
Michael Bachmann
Abstract:
By means of the principle of minimal sensitivity we generalize the microcanonical inflection-point analysis method by probing derivatives of the microcanonical entropy for signals of transitions in complex systems. A strategy of systematically identifying and locating independent and dependent phase transitions of any order is proposed. The power of the generalized method is demonstrated in applic…
▽ More
By means of the principle of minimal sensitivity we generalize the microcanonical inflection-point analysis method by probing derivatives of the microcanonical entropy for signals of transitions in complex systems. A strategy of systematically identifying and locating independent and dependent phase transitions of any order is proposed. The power of the generalized method is demonstrated in applications to the ferromagnetic Ising model and a coarse-grained model for polymer adsorption onto a substrate. The results shed new light on the intrinsic phase structure of systems with cooperative behavior.
△ Less
Submitted 3 May, 2018;
originally announced May 2018.
-
Resonant torsion magnetometry in anisotropic quantum materials
Authors:
K. A. Modic,
Maja D. Bachmann,
B. J. Ramshaw,
F. Arnold,
K. R. Shirer,
Amelia Estry,
J. B. Betts,
Nirmal J. Ghimire,
E. D. Bauer,
Marcus Schmidt,
Michael Baenitz,
E. Svanidze,
Ross D. McDonald,
Arkady Shekhter,
Philip J. W. Moll
Abstract:
Unusual behavior of quantum materials commonly arises from their effective low-dimensional physics, which reflects the underlying anisotropy in the spin and charge degrees of freedom. Torque magnetometry is a highly sensitive technique to directly quantify the anisotropy in quantum materials, such as the layered high-T$_c$ superconductors, anisotropic quantum spin-liquids, and the surface states o…
▽ More
Unusual behavior of quantum materials commonly arises from their effective low-dimensional physics, which reflects the underlying anisotropy in the spin and charge degrees of freedom. Torque magnetometry is a highly sensitive technique to directly quantify the anisotropy in quantum materials, such as the layered high-T$_c$ superconductors, anisotropic quantum spin-liquids, and the surface states of topological insulators. Here we introduce the magnetotropic coefficient $k=\partial^2 F/\partial θ^2$, the second derivative of the free energy F with respect to the angle $θ$ between the sample and the applied magnetic field, and report a simple and effective method to experimentally detect it. A sub-$μ$g crystallite is placed at the tip of a commercially available atomic force microscopy cantilever, and we show that $k$ can be quantitatively inferred from a shift in the resonant frequency under magnetic field. While related to the magnetic torque $τ=\partial F/\partial θ$, $k$ takes the role of torque susceptibility, and thus provides distinct insights into anisotropic materials akin to the difference between magnetization and magnetic susceptibility. The thermodynamic coefficient $k$ is discontinuous at second-order phase transitions and subject to Ehrenfest relations with the specific heat and magnetic susceptibility. We apply this simple yet quantitative method on the exemplary cases of the Weyl-semimetal NbP and the spin-liquid candidate RuCl$_3$, yet it is broadly applicable in quantum materials research.
△ Less
Submitted 22 February, 2018;
originally announced February 2018.
-
Electronic in-plane symmetry breaking at field-tuned quantum criticality in CeRhIn5
Authors:
F. Ronning,
T. Helm,
K. Shirer,
M. Bachmann,
L. Balicas,
M. Chan,
B. J. Ramshaw,
R. D. McDonald,
F. F. Balakirev,
M. Jaime,
E. D. Bauer,
P. J. W. Moll
Abstract:
Electronic nematics are exotic states of matter where electronic interactions break a rotational symmetry of the underlying lattice, in analogy to the directional alignment without translational order in nematic liquid crystals. Intriguingly such phases appear in the copper- and iron-based superconductors, and their role in establishing high-temperature superconductivity remains an open question.…
▽ More
Electronic nematics are exotic states of matter where electronic interactions break a rotational symmetry of the underlying lattice, in analogy to the directional alignment without translational order in nematic liquid crystals. Intriguingly such phases appear in the copper- and iron-based superconductors, and their role in establishing high-temperature superconductivity remains an open question. Nematicity may take an active part, cooperating or competing with superconductivity, or may appear accidentally in such systems. Here we present experimental evidence for a phase of nematic character in the heavy fermion superconductor CeRhIn5. We observe a field-induced breaking of the electronic tetragonal symmetry of in the vicinity of an antiferromagnetic (AFM) quantum phase transition at Hc~50T. This phase appears in out-of-plane fields of H*~28T and is characterized by substantial in-plane resistivity anisotropy. The anisotropy can be aligned by a small in-plane field component, with no apparent connection to the underlying crystal structure. Furthermore no anomalies are observed in the magnetic torque, suggesting the absence of metamagnetic transitions in this field range. These observations are indicative of an electronic nematic character of the high field state in CeRhIn5. The appearance of nematic behavior in a phenotypical heavy fermion superconductor highlights the interrelation of nematicity and unconventional superconductivity, suggesting nematicity to be a commonality in such materials.
△ Less
Submitted 3 June, 2017;
originally announced June 2017.
-
Solvent-Dependent Critical Properties of Polymer Adsorption
Authors:
J. A. Plascak,
Paulo H. L. Martins,
Michael Bachmann
Abstract:
Advanced chain-growth computer simulation methodologies have been employed for a systematic statistical analysis of the critical behavior of a polymer adsorbing at a substrate. We use finitesize scaling techniques to investigate the solvent-quality dependence of critical exponents, critical temperature, and the structure of the phase diagram. Our study covers all solvent effects from the limit of…
▽ More
Advanced chain-growth computer simulation methodologies have been employed for a systematic statistical analysis of the critical behavior of a polymer adsorbing at a substrate. We use finitesize scaling techniques to investigate the solvent-quality dependence of critical exponents, critical temperature, and the structure of the phase diagram. Our study covers all solvent effects from the limit of super-self-avoiding walks, characterized by effective monomer-monomer repulsion, to poor solvent conditions that enable the formation of compact polymer structures. The results significantly benefit from taking into account corrections to scaling.
△ Less
Submitted 7 May, 2017;
originally announced May 2017.
-
Quantum limit transport and destruction of the Weyl nodes in TaAs
Authors:
B. J. Ramshaw,
K. A. Modic,
Arkady Shekhter,
Yi Zhang,
Eun-Ah Kim,
Philip J. W. Moll,
Maja Bachmann,
M. K. Chan,
J. B. Betts,
F. Balakirev,
A. Migliori,
N. J. Ghimire,
E. D. Bauer,
F. Ronning,
R. D. McDonald
Abstract:
Weyl fermions are a new ingredient for correlated states of electronic matter. A key difficulty has been that real materials also contain non-Weyl quasiparticles, and disentangling the experimental signatures has proven challenging. We use magnetic fields up to 95 tesla to drive the Weyl semimetal TaAs far into its quantum limit (QL), where only the purely chiral 0th Landau levels (LLs) of the Wey…
▽ More
Weyl fermions are a new ingredient for correlated states of electronic matter. A key difficulty has been that real materials also contain non-Weyl quasiparticles, and disentangling the experimental signatures has proven challenging. We use magnetic fields up to 95 tesla to drive the Weyl semimetal TaAs far into its quantum limit (QL), where only the purely chiral 0th Landau levels (LLs) of the Weyl fermions are occupied. We find the electrical resistivity to be nearly independent of magnetic field up to 50 tesla: unusual for conventional metals but consistent with the chiral anomaly for Weyl fermions. Above 50 tesla we observe a two-order-of-magnitude increase in resistivity, indicating that a gap opens in the chiral LLs. Above 80 tesla we observe strong ultrasonic attenuation below 2 kelvin, suggesting a mesoscopically-textured state of matter. These results point the way to inducing new correlated states of matter in the QL of Weyl semimetals.
△ Less
Submitted 12 June, 2018; v1 submitted 23 April, 2017;
originally announced April 2017.
-
Inducing superconductivity in Weyl semi-metal microstructures by selective ion sputtering
Authors:
Maja D. Bachmann,
Nityan Nair,
Felix Flicker,
Roni Ilan,
Tobias Meng,
Nirmal J. Ghimire,
Eric D. Bauer,
Filip Ronning,
James G. Analytis,
Philip J. W. Moll
Abstract:
By introducing a superconducting gap in Weyl- or Dirac semi-metals, the superconducting state inherits the non-trivial topology of their electronic structure. As a result, Weyl superconductors are expected to host exotic phenomena such as non-zero-momentum pairing due to their chiral node structure, or zero- energy Majorana modes at the surface. These are of fundamental interest to improve our und…
▽ More
By introducing a superconducting gap in Weyl- or Dirac semi-metals, the superconducting state inherits the non-trivial topology of their electronic structure. As a result, Weyl superconductors are expected to host exotic phenomena such as non-zero-momentum pairing due to their chiral node structure, or zero- energy Majorana modes at the surface. These are of fundamental interest to improve our understanding of correlated topological systems, and moreover practical applications in phase coherent devices and quantum applications have been proposed. Proximity-induced superconductivity promises to allow such experiments on non-superconducting Weyl semi-metals. Here we show a new route to reliably fabricating superconducting microstructures from the non-superconducting Weyl semi-metal NbAs under ion irradiation. The significant difference in the surface binding energy of Nb and As leads to a natural enrichment of Nb at the surface during ion milling, forming a superconducting surface layer (Tc~3.5K). Being formed from the target crystal itself, the ideal contact between the superconductor and the bulk may enable an effective gap** of the Weyl nodes in the bulk due to the proximity effect. Simple ion irradiation may thus serve as a powerful tool to fabricating topological quantum devices from mono-arsenides, even on an industrial scale.
△ Less
Submitted 23 March, 2017;
originally announced March 2017.
-
Stabilization of helical macromolecular phases by confined bending
Authors:
Matthew J. Williams,
Michael Bachmann
Abstract:
By means of extensive replica-exchange simulations of generic coarse-grained models for helical polymers, we systematically investigate the structural transitions into all possible helical phases for flexible and semiflexible elastic polymers with self-interaction under the influence of torsion barriers. The competing interactions lead to a variety of conformational phases including disordered hel…
▽ More
By means of extensive replica-exchange simulations of generic coarse-grained models for helical polymers, we systematically investigate the structural transitions into all possible helical phases for flexible and semiflexible elastic polymers with self-interaction under the influence of torsion barriers. The competing interactions lead to a variety of conformational phases including disordered helical arrangements, single helices, and ordered, tertiary helix bundles. Most remarkably, we find that a bending restraint entails a clear separation and stabilization of the helical phases. This aids in understanding why semiflexible polymers such as double-stranded DNA tend to form pronounced helical structures and proteins often exhibit an abundance of helical structures, such as helix bundles, within their tertiary structure.
△ Less
Submitted 21 September, 2015;
originally announced September 2015.
-
Thermodynamics of the Adsorption of Flexible Polymers on Nanowires
Authors:
Thomas Vogel,
Jonathan Gross,
Michael Bachmann
Abstract:
Generalized-ensemble simulations enable the study of complex adsorption scenarios of a coarse-grained model polymer near an attractive nanostring, representing an ultrathin nanowire. We perform canonical and microcanonical statistical analyses to investigate structural transitions of the polymer and discuss their dependence on the temperature and on model parameters such as effective wire thicknes…
▽ More
Generalized-ensemble simulations enable the study of complex adsorption scenarios of a coarse-grained model polymer near an attractive nanostring, representing an ultrathin nanowire. We perform canonical and microcanonical statistical analyses to investigate structural transitions of the polymer and discuss their dependence on the temperature and on model parameters such as effective wire thickness and attraction strength. The result is a complete hyperphase diagram of the polymer phases, whose locations and stability are influenced by the effective material properties of the nanowire and the strength of the thermal fluctuations. Major structural polymer phases in the adsorbed state include compact droplets attached to or wrap** around the wire, and tubelike conformations with triangular pattern that resemble ideal boron nanotubes. The classification of the transitions is performed by microcanonical inflection-point analysis.
△ Less
Submitted 5 March, 2015;
originally announced March 2015.
-
Identifying transitions in finite systems by means of partition function zeros and microcanonical inflection-point analysis: A comparison for elastic flexible polymers
Authors:
Julio C. S. Rocha,
Stefan Schnabel,
David P. Landau,
Michael Bachmann
Abstract:
For the estimation of transition points of finite elastic, flexible polymers with chain lengths from $13$ to $309$ monomers, we compare systematically transition temperatures obtained by the Fisher partition function zeros approach with recent results from microcanonical inflection-point analysis. These methods rely on accurate numerical estimates of the density of states, which have been obtained…
▽ More
For the estimation of transition points of finite elastic, flexible polymers with chain lengths from $13$ to $309$ monomers, we compare systematically transition temperatures obtained by the Fisher partition function zeros approach with recent results from microcanonical inflection-point analysis. These methods rely on accurate numerical estimates of the density of states, which have been obtained by advanced multicanonical Monte Carlo sampling techniques. Both the Fisher zeros method and microcanonical inflection-point analysis yield very similar results and enable the unique identification of transition points in finite systems, which is typically impossible in the conventional canonical analysis of thermodynamic quantities.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
Autocorrelation study of the Θ transition for a coarse-grained polymer model
Authors:
Kai Qi,
Michael Bachmann
Abstract:
By means of Metropolis Monte Carlo simulations of a coarse-grained model for flexible polymers, we investigate how the integrated autocorrelation times of different energetic and structural quantities depend on the temperature. We show that, due to critical slowing down, an extremal autocorrelation time can also be considered as an indicator for the collapse transition that helps to locate the tra…
▽ More
By means of Metropolis Monte Carlo simulations of a coarse-grained model for flexible polymers, we investigate how the integrated autocorrelation times of different energetic and structural quantities depend on the temperature. We show that, due to critical slowing down, an extremal autocorrelation time can also be considered as an indicator for the collapse transition that helps to locate the transition point. This is particularly useful for finite systems, where response quantities such as the specific heat do not necessarily exhibit clear indications for pronounced thermal activity.
△ Less
Submitted 15 August, 2014;
originally announced August 2014.
-
Adsorption and Pattern Recognition of Polymers at Complex Surfaces with Attractive Stripe-like Motifs
Authors:
Monika Möddel,
Wolfhard Janke,
Michael Bachmann
Abstract:
We construct the complete structural phase diagram of polymer adsorption at substrates with attractive stripe-like patterns in the parameter space spanned by the adsorption affinity of the stripes and temperature. Results were obtained by extensive generalized-ensemble Monte Carlo simulations of a generic model for the hybrid organic-inorganic system. By comparing with adhesion properties at homog…
▽ More
We construct the complete structural phase diagram of polymer adsorption at substrates with attractive stripe-like patterns in the parameter space spanned by the adsorption affinity of the stripes and temperature. Results were obtained by extensive generalized-ensemble Monte Carlo simulations of a generic model for the hybrid organic-inorganic system. By comparing with adhesion properties at homogeneous substrates, we find substantial differences in the formation of adsorbed polymer structures if translational invariance at the surface is broken by a regular pattern. Beside a more specific understanding of polymer adsorption processes, our results are potentially relevant for the design of macromolecular pattern recognition devices such as sensors.
△ Less
Submitted 10 April, 2014;
originally announced April 2014.
-
Advanced multicanonical Monte Carlo methods for efficient simulations of nucleation processes of polymers
Authors:
Stefan Schnabel,
Michael Bachmann,
Wolfhard Janke
Abstract:
The investigation of freezing transitions of single polymers is computationally demanding, since surface effects dominate the nucleation process. In recent studies we have systematically shown that the freezing properties of flexible, elastic polymers depend on the precise chain length. Performing multicanonical Monte Carlo simulations, we faced several computational challenges in connection with…
▽ More
The investigation of freezing transitions of single polymers is computationally demanding, since surface effects dominate the nucleation process. In recent studies we have systematically shown that the freezing properties of flexible, elastic polymers depend on the precise chain length. Performing multicanonical Monte Carlo simulations, we faced several computational challenges in connection with liquid-solid and solid-solid transitions. For this reason, we developed novel methods and update strategies to overcome the arising problems. We introduce novel Monte Carlo moves and two extensions to the multicanonical method.
△ Less
Submitted 17 July, 2012;
originally announced July 2012.
-
Atomistic Green's Function Method supported by ab initio Calculations : Application to phonon transport in ZnO and ZnS
Authors:
M. Bachmann,
M. Czerner,
S. Edaldati-Boostan,
C. Heiliger
Abstract:
We present an approach to calculate ballistic phonon transport that combines the atomistic Green's function (AGF) method with ab initio results. For the inter atomic potential we use the harmonic approach. The equilibrium positions of the atoms and the inter atomic force constants(ifcs) are calculated using the ABINIT program package, which is based on density functional theory. Therefore, the pre…
▽ More
We present an approach to calculate ballistic phonon transport that combines the atomistic Green's function (AGF) method with ab initio results. For the inter atomic potential we use the harmonic approach. The equilibrium positions of the atoms and the inter atomic force constants(ifcs) are calculated using the ABINIT program package, which is based on density functional theory. Therefore, the presented approach is parameter free. From the Green's function of the system we determine the density of states as well as the transmission function. The thermal conductance is obtained within the linear response regime. We apply this approach to bulk ZnO and bulk ZnS. Transmission functions for different transport direction for each material are presented. A comparison of the transmission function shows, that a ZnO/ZnS interface could be a promising phonon blocker. Adding such interfaces in ZnO or ZnS based thermoelectric devices could therefore increase the figure of merit.
△ Less
Submitted 10 November, 2011;
originally announced November 2011.
-
Comparison of the Adsorption Transition for Grafted and Nongrafted Polymers
Authors:
Monika Möddel,
Wolfhard Janke,
Michael Bachmann
Abstract:
We compare the thermodynamic behavior of a finite single nongrafted polymer near an attractive substrate with that of a polymer grafted to that substrate. After we recently found first-order-like signatures in the microcanonical entropy at the adsorption transition in the nongrafted case, and given the fact that many studies on polymer adsorption in the past have been performed for grafted polymer…
▽ More
We compare the thermodynamic behavior of a finite single nongrafted polymer near an attractive substrate with that of a polymer grafted to that substrate. After we recently found first-order-like signatures in the microcanonical entropy at the adsorption transition in the nongrafted case, and given the fact that many studies on polymer adsorption in the past have been performed for grafted polymers, the question arises, to what extent and in what way does grafting change the nature of the adsorption transition? This question is tackled here using a coarse-grained off-lattice polymer model and covers not only the adsorption transition but also all other transitions a single polymer near an attractive substrate of varying strengths undergoes. Because of the impact of grafting especially on the translational but also on the conformational entropy of desorbed chains, the adsorption transition is affected the strongest. Our results are obtained by a combined canonical and microcanonical analysis of parallel tempering Monte Carlo data.
△ Less
Submitted 26 October, 2011;
originally announced October 2011.
-
Thermodynamics of polymer adsorption to a flexible membrane
Authors:
Steffen Karalus,
Wolfhard Janke,
Michael Bachmann
Abstract:
We analyze the structural behavior of a single polymer chain grafted to an attractive, flexible surface. Our model is composed of a coarse-grained bead-and-spring polymer and a tethered membrane. By means of extensive parallel tempering Monte Carlo simulations it is shown that the system exhibits a rich phase behavior ranging from highly ordered, compact to extended random coil structures and from…
▽ More
We analyze the structural behavior of a single polymer chain grafted to an attractive, flexible surface. Our model is composed of a coarse-grained bead-and-spring polymer and a tethered membrane. By means of extensive parallel tempering Monte Carlo simulations it is shown that the system exhibits a rich phase behavior ranging from highly ordered, compact to extended random coil structures and from desorbed to completely adsorbed or even partially embedded conformations. These findings are summarized in a pseudophase diagram indicating the predominant class of conformations as a function of the external parameters temperature and polymer-membrane interaction strength. By comparison with adsorption to a stiff membrane surface it is shown that the flexibility of the membrane gives rise to qualitatively new behavior such as stretching of adsorbed conformations.
△ Less
Submitted 23 September, 2011;
originally announced September 2011.
-
Massively parallelized replica-exchange simulations of polymers on GPUs
Authors:
Jonathan Groß,
Wolfhard Janke,
Michael Bachmann
Abstract:
We discuss the advantages of parallelization by multithreading on graphics processing units (GPUs) for parallel tempering Monte Carlo computer simulations of an exemplified bead-spring model for homopolymers. Since the sampling of a large ensemble of conformations is a prerequisite for the precise estimation of statistical quantities such as typical indicators for conformational transitions like t…
▽ More
We discuss the advantages of parallelization by multithreading on graphics processing units (GPUs) for parallel tempering Monte Carlo computer simulations of an exemplified bead-spring model for homopolymers. Since the sampling of a large ensemble of conformations is a prerequisite for the precise estimation of statistical quantities such as typical indicators for conformational transitions like the peak structure of the specific heat, the advantage of a strong increase in performance of Monte Carlo simulations cannot be overestimated. Employing multithreading and utilizing the massive power of the large number of cores on GPUs, being available in modern but standard graphics cards, we find a rapid increase in efficiency when porting parts of the code from the central processing unit (CPU) to the GPU.
△ Less
Submitted 18 July, 2011;
originally announced July 2011.