-
Giant Tuning of Electronic and Thermoelectric Properties by Epitaxial Strain in p-Type Sr-Doped LaCrO3 Transparent Thin Films
Authors:
D. Han,
R. Moalla,
I. Fina,
V. M. Giordano,
M. d'Esperonnat,
C. Botella,
G. Grenet,
R. Debord,
S. Pailhes,
G. Saint-Girons,
R. Bachelet
Abstract:
The impact of epitaxial strain on the structural, electronic, and thermoelectric properties of p-type transparent Sr-doped LaCrO3 thin films has been investigated. For this purpose, high-quality fully strained La0.75Sr0.25CrO3 (LSCO) epitaxial thin films were grown by molecular beam epitaxy on three different (pseudo)cubic (001)-oriented perovskite oxide substrates: LaAlO3, (LaAlO3)0.3(Sr2AlTaO6)0…
▽ More
The impact of epitaxial strain on the structural, electronic, and thermoelectric properties of p-type transparent Sr-doped LaCrO3 thin films has been investigated. For this purpose, high-quality fully strained La0.75Sr0.25CrO3 (LSCO) epitaxial thin films were grown by molecular beam epitaxy on three different (pseudo)cubic (001)-oriented perovskite oxide substrates: LaAlO3, (LaAlO3)0.3(Sr2AlTaO6)0.7, and DyScO3. The lattice mismatch between the LSCO films and the substrates induces in-plane strain ranging from -2.06% (compressive) to +1.75% (tensile). The electric conductivity can be controlled over 2 orders of magnitude, ranging from 0.5 S/cm (tensile strain) to 35 S/cm (compressive strain). Consistently, the Seebeck coefficient S can be finely tuned by a factor of almost 2 from 127 microV/K (compressive strain) to 208 microV/K (tensile strain). Interestingly, we show that the thermoelectric power factor can consequently be tuned by almost 2 orders of magnitude. The compressive strain yields a remarkable enhancement by a factor of 3 for 2% compressive strain with respect to almost relaxed films. These results demonstrate that epitaxial strain is a powerful lever to control the electric properties of LSCO and enhance its thermoelectric properties, which is of high interest for various devices and key applications such as thermal energy harvesters, coolers, transparent conductors, photocatalyzers, and spintronic memories.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Epitaxial Ferroelectric La-doped Hf0.5Zr0.5O2 Thin Films
Authors:
Tingfeng Song,
Romain Bachelet,
Guillaume Saint-Girons,
Raul Solanas,
Ignasi Fina,
Florencio Sanchez
Abstract:
Do** ferroelectric Hf0.5Zr0.5O2 with La is a promising route to improve endurance. However, the beneficial effect of La on the endurance of polycrystalline films may be accompanied by degradation of the retention. We have investigated the endurance - retention dilemma in La-doped epitaxial films. Compared to undoped epitaxial films, large values of polarization are obtained in a wider thickness…
▽ More
Do** ferroelectric Hf0.5Zr0.5O2 with La is a promising route to improve endurance. However, the beneficial effect of La on the endurance of polycrystalline films may be accompanied by degradation of the retention. We have investigated the endurance - retention dilemma in La-doped epitaxial films. Compared to undoped epitaxial films, large values of polarization are obtained in a wider thickness range, whereas the coercive fields are similar, and the leakage current is substantially reduced. Compared to polycrystalline La-doped films, epitaxial La-doped films show more fatigue but there is not significant wake-up effect and endurance-retention dilemma. The persistent wake-up effect common to polycrystalline La-doped Hf0.5Zr0.5O2 films, is limited to a few cycles in epitaxial films. Despite fatigue, endurance in epitaxial La-doped films is more than 1010 cycles, and this good property is accompanied by excellent retention of more than 10 years. These results demonstrate that wake-up effect and endurance-retention dilemma are not intrinsic in La-doped Hf0.5Zr0.5O2.
△ Less
Submitted 28 October, 2020; v1 submitted 27 October, 2020;
originally announced October 2020.
-
Enhanced ferroelectricity in epitaxial Hf0.5Zr0.5O2 thin films integrated with Si(001) using SrTiO3 templates
Authors:
J. Lyu,
I. Fina,
R. Bachelet,
G. Saint-Girons,
S. Estandia,
J. Gazquez,
J. Fontcuberta,
F. Sanchez
Abstract:
SrTiO3 templates have been used to integrate epitaxial bilayers of ferroelectric Hf0.5Zr0.5O2 and La2/3Sr1/3MnO3 bottom electrode on Si(001). The Hf0.5Zr0.5O2 films show enhanced properties in comparison to equivalent films on SrTiO3(001) single crystalline substrates. The films, thinner than 10 nm, have very high remnant polarization of 34 uC/cm2. Hf0.5Zr0.5O2 capacitors at operating voltage of 4…
▽ More
SrTiO3 templates have been used to integrate epitaxial bilayers of ferroelectric Hf0.5Zr0.5O2 and La2/3Sr1/3MnO3 bottom electrode on Si(001). The Hf0.5Zr0.5O2 films show enhanced properties in comparison to equivalent films on SrTiO3(001) single crystalline substrates. The films, thinner than 10 nm, have very high remnant polarization of 34 uC/cm2. Hf0.5Zr0.5O2 capacitors at operating voltage of 4 V present long retention time well beyond 10 years and high endurance against fatigue up to 109 cycles. The robust ferroelectric properties displayed by the epitaxial Hf0.5Zr0.5O2 films on Si(001) using SrTiO3 templates paves the way for the monolithic integration on silicon of emerging memory devices based on epitaxial HfO2.
△ Less
Submitted 5 June, 2019;
originally announced June 2019.
-
Thermoelectric La-doped SrTiO3 epitaxial layers with single-crystal quality: from nanometer to micrometer and mosaicity effects
Authors:
M. Apreutesei,
R. Debord,
M. Bouras,
P. Regreny,
C. Botella,
A. Benamrouche,
A. Carretero-Genevrier,
J. Gazquez,
G. Grenet,
S. Pailhes,
G. Saint-Girons,
R. Bachelet
Abstract:
High-quality thermoelectric LaxSr1-xTiO3 (LSTO) layers (here with x = 0.2), with thicknesses ranging from 20 nm to 700 nm, have been epitaxially grown on SrTiO3(001) substrates by enhanced solid-source oxide molecular-beam epitaxy. All films are atomically flat (with rms roughness < 0.2 nm), with low mosaicity (<0.1°), and present very low electrical resistivity (<5 x 10-4 ohm.cm at room temperatu…
▽ More
High-quality thermoelectric LaxSr1-xTiO3 (LSTO) layers (here with x = 0.2), with thicknesses ranging from 20 nm to 700 nm, have been epitaxially grown on SrTiO3(001) substrates by enhanced solid-source oxide molecular-beam epitaxy. All films are atomically flat (with rms roughness < 0.2 nm), with low mosaicity (<0.1°), and present very low electrical resistivity (<5 x 10-4 ohm.cm at room temperature), one order of magnitude lower than commercial Nb-doped SrTiO3 single-crystalline substrate. The conservation of transport properties within this thickness range has been confirmed by thermoelectric measurements where Seebeck coefficients of around -60 microV/K have been found for all films, accordingly. Finally, a correlation is given between the mosaicity and the (thermo)electric properties. These functional LSTO films can be integrated on Si in opto-microelectronic devices as transparent conductor, thermoelectric elements or in non-volatile memory structures.
△ Less
Submitted 28 March, 2017;
originally announced March 2017.
-
Unified modelling of the thermoelectric properties in SrTiO3
Authors:
G. Bouzerar,
S. Thébaud,
Ch. Adessi,
R. Debord,
M. Apreutesei,
R. Bachelet,
S. Pailhès
Abstract:
Thermoelectric materials are opening a promising pathway to address energy conversion issues governed by a competition between thermal and electronic transport. Improving the efficiency is a difficult task, a challenge that requires new strategies to unearth optimized compounds. We present a theory of thermoelectric transport in electron doped SrTiO3, based on a realistic tight binding model that…
▽ More
Thermoelectric materials are opening a promising pathway to address energy conversion issues governed by a competition between thermal and electronic transport. Improving the efficiency is a difficult task, a challenge that requires new strategies to unearth optimized compounds. We present a theory of thermoelectric transport in electron doped SrTiO3, based on a realistic tight binding model that includes relevant scattering processes. We compare our calculations against a wide panel of experimental data, both bulk and thin films. We find a qualitative and quantitative agreement over both a wide range of temperatures and carrier concentrations, from light to heavily doped. Moreover, the results appear insensitive to the nature of the dopant La, B, Gd and Nb. Thus, the quantitative success found in the case of SrTiO3, reveals an efficient procedure to explore new routes to improve the thermoelectric properties in oxides.
△ Less
Submitted 9 February, 2017;
originally announced February 2017.
-
Laterally-confined two-dimensional electron gases in self-patterned LaAlO3/SrTiO3 interfaces
Authors:
M. Foerster,
R. Bachelet,
V. Laukhin,
J. Fontcuberta,
G. Herranz,
F. Sanchez
Abstract:
A bottom-up process has been used to engineer the LaAlO3/SrTiO3 interface atomic composition and locally confine the two-dimensional electron gas to lateral sizes in the order of 100 nm. This is achieved by using SrTiO3(001) substrate surfaces with self-patterned chemical termination, which is replicated by the LaAlO3 layer, resulting in a modulated LaO/TiO2 and AlO2/SrO interface composition. We…
▽ More
A bottom-up process has been used to engineer the LaAlO3/SrTiO3 interface atomic composition and locally confine the two-dimensional electron gas to lateral sizes in the order of 100 nm. This is achieved by using SrTiO3(001) substrate surfaces with self-patterned chemical termination, which is replicated by the LaAlO3 layer, resulting in a modulated LaO/TiO2 and AlO2/SrO interface composition. We demonstrate the confinement of the conducting interface forming either long-range ordered nanometric stripes or isolated regions. Our results demonstrate that engineering the interface chemical termination is a suitable strategy towards nanoscale lateral confinement of two-dimensional high-mobility systems.
△ Less
Submitted 22 January, 2014;
originally announced January 2014.
-
X-ray interference effects on the determination of structural data in ultrathin La2/3Sr1/3MnO3 epitaxial thin films
Authors:
D. Pesquera,
R. Bachelet,
G. Herranz,
J. Fontcuberta,
X. Marti,
V. Holy
Abstract:
We analyze X-ray diffraction data used to extract cell parameters of ultrathin films on closely matching substrates. We focus on epitaxial La2/3Sr1/3MnO3 films grown on (001) SrTiO3 single crystalline substrates. It will be shown that, due to extremely high structural similarity of film and substrate, data analysis must explicitly consider the distinct phase of the diffracted waves by substrate an…
▽ More
We analyze X-ray diffraction data used to extract cell parameters of ultrathin films on closely matching substrates. We focus on epitaxial La2/3Sr1/3MnO3 films grown on (001) SrTiO3 single crystalline substrates. It will be shown that, due to extremely high structural similarity of film and substrate, data analysis must explicitly consider the distinct phase of the diffracted waves by substrate and films to extract reliable unit cell parameters. The implications of this finding for the understanding of strain effects in ultrathin films and interfaces will be underlined
△ Less
Submitted 28 January, 2013;
originally announced January 2013.
-
Strain-driven non-collinear magnetic ordering in orthorhombic epitaxial YMnO3 thin films
Authors:
X. Marti,
V. Skumryev,
V. Laukhin,
R. Bachelet,
C. Ferrater,
M. V. García-Cuenca,
M. Varela,
F. Sánchez,
J. Fontcuberta
Abstract:
We show that using epitaxial strain and chemical pressure in orthorhombic YMnO3 and Co-substituted (YMn0.95Co0.05O3) thin films, a ferromagnetic response can be gradually introduced and tuned. These results, together with the measured anisotropy of the magnetic response, indicate that the unexpected observation of ferromagnetism in orthorhombic o-RMnO3 (R= Y, Ho, Tb, etc) films originates from str…
▽ More
We show that using epitaxial strain and chemical pressure in orthorhombic YMnO3 and Co-substituted (YMn0.95Co0.05O3) thin films, a ferromagnetic response can be gradually introduced and tuned. These results, together with the measured anisotropy of the magnetic response, indicate that the unexpected observation of ferromagnetism in orthorhombic o-RMnO3 (R= Y, Ho, Tb, etc) films originates from strain-driven breaking of the fully compensated magnetic ordering by pushing magnetic moments away from the antiferromagnetic [010] axis. We show that the resulting canting angle and the subsequent ferromagnetic response, gradually increase (up to ~ 1.2\degree) by compression of the unit cell. We will discuss the relevance of these findings, in connection to the magnetoelectric response of orthorhombic manganites.
△ Less
Submitted 12 February, 2011; v1 submitted 20 October, 2010;
originally announced October 2010.
-
Monte Carlo approach of the islanding of polycrystalline thin films
Authors:
F. Lallet,
R. Bachelet,
A. Dauger,
N. Olivi-Tran
Abstract:
We computed by a Monte Carlo method derived from the Solid on Solid model, the evolution of a polycrystalline thin film deposited on a substrate during thermal treatment. Two types of substrates have been studied: a single crystalline substrate with no defects and a single crystalline substrate with defects. We obtain islands which are either flat (i.e. with a height which does not overcome a gi…
▽ More
We computed by a Monte Carlo method derived from the Solid on Solid model, the evolution of a polycrystalline thin film deposited on a substrate during thermal treatment. Two types of substrates have been studied: a single crystalline substrate with no defects and a single crystalline substrate with defects. We obtain islands which are either flat (i.e. with a height which does not overcome a given value) or grow in height like narrow towers. A good agreement was found regarding the morphology of numerical nanoislands at equilibrium, deduced from our model, and experimental nanoislands resulting from the fragmentation of YSZ thin films after thermal treatment.
△ Less
Submitted 12 December, 2005;
originally announced December 2005.
