-
Copper do** effects on the superconducting properties of Sm-based oxypnictides
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Taras Palasyuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Cezariusz Jastrzebski,
Michał Wierzbicki,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits…
▽ More
A systematic investigation has been performed by synthesis and comprehensive characterization of a series of SmFe1-xCuxAsO0.8F0.2 bulks (x = 0 to 0.2). These samples are well characterized by structural, Raman spectroscopy, microstructural, transport, magnetic measurements, and supplementary calculations within density functional theory (DFT). The parent compound, SmFeAsO0.8F0.2 (Sm1111), exhibits a superconducting transition temperature (Tc) of approximately 54 K. The lattice volume (V) is increased with Cu substitution (x) without observing any impurity phase related to copper, which confirms the successful incorporation of Cu at Fe sites in the superconducting FeAs layers. These analyses are also well in agreement with Raman spectroscopy measurements and relevant DFT results. The superconducting transition is decreased systematically with copper do** and completely suppressed for 7% Cu-doped Sm1111 (x = 0.07). A large amount of Cu substitution (x greater than 0.07) has demonstrated the metal to insulate transition in the low-temperature range, and no impurity phase was observed even at high Cu do** levels (x = 0.2). The calculated critical current density of the parent sample is suppressed with copper substitution, suggesting the reduced pinning centers, sample density, and grain connections, as confirmed by the microstructural analysis. Our studies suggest that the substitution of Cu in the superconducting FeAs layer, resulting the enlargement of the lattice volume, is a source of strong disorder scattering, leading to the suppression of Tc and the emergence of metal-to-insulator, unlike the more successful carrier do** by nickel (Ni) or cobalt (Co), as previously reported.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Effect of impurity phase and high-pressure synthesis on the superconducting properties of CaKFe4As4
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at…
▽ More
AeAFe4As4 (Ae = Ca, A = K; 1144) having a transition temperature of 35 K is a stoichiometric family of iron-based superconductors (FBS). Here, we present a detailed study of a high-pressure synthesis of CaKFe4As4 bulks to investigate the impact of these conditions on the superconducting properties of the 1144 family. Additionally, these samples are also prepared by conventional synthesis method at ambient pressure (CSP) and studied the influence of impurities on the superconducting properties of CaKFe4As4. Structural, microstructural, transport and magnetization measurements have been performed to reach the final conclusions. Interestingly, the high-pressure synthesis of the parent CaKFe4As4 compound enhances the transition temperature (Tc) by 2 K and the critical current density (Jc) by one order of magnitude in the whole magnetic field range of 9 T than that of the 1144 bulks prepared by CSP. It suggests the improvement of the pinning centers and grain connections by the high-pressure synthesis approach. Interestingly, our results depict the superconducting onset transition temperature (Tconset) of this stoichiometric 1144 family is robust with the presence of the common 122 (CaFe2As2 or KFe2As2) impurity phases, which is a different behavior compared to other FBS families. However, these impurity phases reduce the grain connections and lead to the phase separation during the formation of the superconducting (1144) phase.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Enhancement of Superconducting Properties of Polycrystalline CaKFe4As4 by High-Pressure Growth
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have…
▽ More
High-pressure growth is a unique method to improve the sample quality and size. Here, we have used the high gas pressure and high-temperature synthesis (HP-HTS) method to grow CaKFe4As4 (1144) bulks and investigated their superconducting properties using structural, microstructural, transport, and magnetic studies. The microstructural analysis demonstrates that 1144 samples prepared by HP-HTS have improved the sample density and grain connectivity. The transition temperature (Tconset) of 1144 bulks prepared by HP-HTS is increased up to 35.2 K with a transition width (ΔT) of 1 K, which is remarkably comparable to the reported 1144 single crystal. Additionally, the critical current density (Jc) is enhanced by almost one order of magnitude compared with the parent compound prepared by the conventional synthesis process at ambient pressure (CSP), which could be attributed to the improved sample density and effective pinning centers. Our study demonstrates that the sample quality and superconducting properties of various iron-based superconductors can be enhanced by applying the HP-HTS approach, and further research is demanded in this direction.
△ Less
Submitted 25 November, 2023;
originally announced November 2023.
-
Antimony Do** Effect on the Superconducting Properties of SmFeAs(O,F)
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin do** effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a l…
▽ More
We report the synthesis and characterization of a series of antimony-doped SmFeAs1-xSbxO0.8F0.2 (x = 0, 0.01, 0.03, 0.05, 0.1, 0.2, and 0.3) bulks to investigate the twin do** effects on the superconducting properties of SmFeAs(O,F) caused by fluorine (F) incorporation at O-site in SmO layer and antimony (Sb) substitution at As-site in the conducting layer (FeAs). Since the antimony (Sb) has a larger size than arsenic (As), the enhancement of lattice parameters has been confirmed by the XRD analysis. Microstructural analysis confirms that Sb-do** leads to a small improvement in the sample density and an increase in the inhomogeneity of the constituent elements, especially at higher Sb-do** levels. The parent compound SmFeAsO0.8F0.2 has shown the superconducting transition (Tc) at ~54 K, which is systematically reduced with the antimony do** contents (x). Our investigation indicates that the Sb-doped SmFeAs(O,F) phase at low levels is less prone to the multiphase formation than at high levels, which affects the inter- and intragranular behaviour originating from the microstructure nature of 1111 bulks. The critical current density (Jc) of the parent compound has almost the same value as previously reported, which is suppressed slowly with increased Sb-do**. It could be due to the reduced grain connections and the effective pinning centers. This study confirms that the superconducting FeAs layer do** with larger ions at arsenic sites does not support the superconducting properties of Sm1111, which is a distinct behavior from that of Sb-doped CeFeAs(O,F) and LaFeAs(O,F).
△ Less
Submitted 23 November, 2023;
originally announced November 2023.
-
Optimization of Synthesis Parameters and Superconducting Properties of GdFeAsO1-xFx
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Svitlana Stelmakh,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
REFeAsO (RE1111; RE: rare earth) belongs to the 1111 family of iron-based superconductors (FBS), which illustrates the enhancement of the superconducting transition (Tc) with smaller radii of RE. However, the synthesis of the 1111 phase with a heavy rare-earth is always challenging. In this paper, we report the optimization of the growth and superconducting properties of F-doped GdFeAsO1-xFx bulks…
▽ More
REFeAsO (RE1111; RE: rare earth) belongs to the 1111 family of iron-based superconductors (FBS), which illustrates the enhancement of the superconducting transition (Tc) with smaller radii of RE. However, the synthesis of the 1111 phase with a heavy rare-earth is always challenging. In this paper, we report the optimization of the growth and superconducting properties of F-doped GdFeAsO1-xFx bulks by preparing the samples in a wide temperature range (700-1100°C) at ambient pressure. The optimized synthesis parameters are concluded based on structural, microstructural, transport, and magnetic measurements. These findings suggest that the optimal conditions for preparing F-doped Gd1111 bulks involve a two-step process at 900°C for 61 hours at ambient pressure, which is lower than previously reported. The optimized samples have revealed the superconducting transition temperature (Tconset) of 43 K for GdFeAsO0.83F0.17. The first-time reported critical current Jc value for this Gd1111 is observed of the order of 10^3 (A/cm^2) at 0 T and 5 K. Our investigation also concluded that highly pure precursors, particularly gadolinium metal, are required to achieve the superconducting properties of F-doped Gd1111. A high growth pressure of 1 GPa reduces the superconducting properties of F-doped Gd1111.
△ Less
Submitted 22 November, 2023;
originally announced November 2023.
-
Comparison of Gd addition effect on the superconducting properties of FeSe0.5Te0.5 bulks under ambient and high-pressure conditions
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Jan Mizeracki,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wisniewski,
Shiv J. Singh
Abstract:
We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizatio…
▽ More
We have prepared a series of (FeSe0.5Te0.5 + xGd) bulk samples, with x = 0, 0.03, 0.05, 0.07, 0.1 and 0.2, through the convenient solid-state reaction method at ambient pressure (CSP). High gas pressure and high-temperature synthesis methods (HP-HTS) are also applied to grow the parent compound (x = 0) and 5-wt% of Gd-added bulks. Structural, microstructural, transport and magnetic characterizations have been performed on these samples in order to draw the final conclusion. Our analysis results that the HP-HTS applied for the parent compound enhances the transition temperature (Tc) and the critical current density (Jc) with the improved sample density and intergrain connections. The lattice parameter c is increased with Gd additions, suggesting a small amount of Gd enters the tetragonal lattice of FeSe0.5Te0.5 and the Gd interstitial sites are along the c-axis. A systematic decrease of the onset transition temperature Tc is observed with Gd additions, however, the calculated Jc of these Gd-added samples is almost the same as that of the parent compound prepared by CSP. It specifies that there is no improvement of the grain connections or pinning properties due to these rare earth additions. However, Gd-added FeSe0.5Te0.5 bulks prepared by HP-HTS have revealed a slightly improved critical current density due to improved grain connections and sample density but have a lower transition temperature than that of the parent compounds.
△ Less
Submitted 5 October, 2023;
originally announced October 2023.
-
High gas pressure and high-temperature synthesis (HP-HTS) technique and its impact on iron-based superconductors
Authors:
Mohammad Azam,
Manasa Manasa,
Andrzej Morawski,
Tomasz Cetner,
Shiv J. Singh
Abstract:
The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large sample space (10-15 cm) to grow various kinds of materials. In this paper, we introduce the high gas pressure and high-temperature synthesis (HP-HTS) technique tha…
▽ More
The high-pressure growth technique generally plays an important role in the improvement of the sample quality and the enhancement of various physical and magnetic properties of materials. The high gas pressure technique provides a large sample space (10-15 cm) to grow various kinds of materials. In this paper, we introduce the high gas pressure and high-temperature synthesis (HP-HTS) technique that is present at our institute and is applied to the growth process of different kinds of superconducting materials, particularly iron-based superconductors. More details and the working principle of this HP-HTS technique are discussed. We have also demonstrated the current results based on the iron-based superconductors by using this unique HP-HTS technique. These results demonstrate the enhancement of the superconducting properties with the improved sample quality compared to the conventional synthesis process at ambient pressure.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
Cometal addition effect on superconducting properties and granular behaviours of polycrystalline FeSe0.5Te0.5
Authors:
Manasa Manasa,
Mohammad Azam,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pur…
▽ More
The enhanced performance of superconducting FeSe0.5Te0.5 materials with added microsized Pb and Sn particles is presented. A series of Pb and Sn added FeSe0.5Te0.5 (FeSe0.5Te0.5 + xPb + ySn; x = y = 0-0.1) bulks are fabricated by solid-state reaction method and characterized through various measurements. A very small amount of Sn and Pb additions enhance the transition temperature (Tconset) of pure FeSe0.5Te0.5 by 1 K, sharpening the superconducting transition and improving the metallic nature in the normal state, whereas larger metal additions reduce Tconset by broadening the superconducting transition. Microstructural analysis and transport studies suggest that at x=y>0.02, Pb and Sn additions enhance the impurity phases, reduce the coupling between grains, and suppress the superconducting percolation, leading to a broad transition. FeSe0.5Te0.5 samples with 2wt% of cometal additions show the best performance with their critical current density, Jc, and the pinning force, Fp, which might be attributable to providing effective flux pinning centres. Our study shows that the inclusion of a relatively small amount of Pb and Sn works effectively for the enhancement of superconducting properties with an improvement of intergrain connections as well as better phase uniformity.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
High-pressure synthesis and the enhancement of the superconducting properties of FeSe0.5Te0.5
Authors:
Mohammad Azam,
Manasa Manasa,
Tatiana Zajarniuk,
Ryszard Diduszko,
Tomasz Cetner,
Andrzej Morawski,
Jarosław Więckowski,
Andrzej Wiśniewski,
Shiv J. Singh
Abstract:
A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk…
▽ More
A series of FeSe0.5Te0.5 bulk samples have been prepared through the high gas pressure and high-temperature synthesis (HP-HTS) method to optimize the growth conditions, for the first time and investigated for their superconducting properties using structural, microstructure, transport, and magnetic measurements to reach the final conclusions. Ex-situ and in-situ processes are used to prepare bulk samples under a range of growth pressures using Ta-tube and without Tatube. The parent compound synthesized by convenient synthesis method at ambient pressure (CSP) exhibits a superconducting transition temperature of 14.8 K. Our data demonstrate that the prepared FeSe0.5Te0.5 sealed in a Ta-tube is of better quality than the samples without a Ta-tube, and the optimum growth conditions (500 MPa, 600°C for 1 h) are favourable for the development of the tetragonal FeSe0.5Te0.5 phase. The optimum bulk FeSe0.5Te0.5 depicts a higher transition temperature of 17.3 K and a high critical current density of the order of >10^4 A/cm^2 at 0 T, which is improved over the entire magnetic field range and almost twice higher than the parent compound prepared through CSP. Our studies confirm that the high-pressure synthesis method is a highly efficient way to improve the superconducting transition, grain connectivity, sample density, and also pinning properties of a superconductor.
△ Less
Submitted 2 August, 2023;
originally announced August 2023.
-
Voltage control of domain walls in magnetic nanowires for energy efficient neuromorphic devices
Authors:
Md Ali Azam,
Dhritiman Bhattacharya,
Damien Querlioz,
Caroline A. Ross,
Jayasimha Atulasimha
Abstract:
An energy-efficient voltage controlled domain wall device for implementing an artificial neuron and synapse is analyzed using micromagnetic modeling in the presence of room temperature thermal noise. By controlling the domain wall motion utilizing spin transfer or spin orbit torques in association with voltage generated strain control of perpendicular magnetic anisotropy in the presence of Dzyalos…
▽ More
An energy-efficient voltage controlled domain wall device for implementing an artificial neuron and synapse is analyzed using micromagnetic modeling in the presence of room temperature thermal noise. By controlling the domain wall motion utilizing spin transfer or spin orbit torques in association with voltage generated strain control of perpendicular magnetic anisotropy in the presence of Dzyaloshinskii-Moriya interaction, different positions of the domain wall are realized in the free layer of a magnetic tunnel junction to program different synaptic weights. The feasibility of scaling of such devices is assessed in the presence of thermal perturbations that compromise controllability. Additionally, an artificial neuron can be realized by combining this DW device with a CMOS buffer. This provides a possible pathway to realize energy efficient voltage controlled nanomagnetic deep neural networks that can learn in real time.
△ Less
Submitted 5 September, 2019; v1 submitted 12 July, 2019;
originally announced July 2019.
-
Resonate and Fire Neuron with Fixed Magnetic Skyrmions
Authors:
Md. Ali Azam,
Dhritiman Bhattacharya,
Damien Querlioz,
Jayasimha Atulasimha
Abstract:
In the brain, the membrane potential of many neurons oscillates in a subthreshold damped fashion and fire when excited by an input frequency that nearly equals their eigen frequency. In this work, we investigate theoretically the artificial implementation of such "resonate-and-fire" neurons by utilizing the magnetization dynamics of a fixed magnetic skyrmion in the free layer of a magnetic tunnel…
▽ More
In the brain, the membrane potential of many neurons oscillates in a subthreshold damped fashion and fire when excited by an input frequency that nearly equals their eigen frequency. In this work, we investigate theoretically the artificial implementation of such "resonate-and-fire" neurons by utilizing the magnetization dynamics of a fixed magnetic skyrmion in the free layer of a magnetic tunnel junction (MTJ). To realize firing of this nanomagnetic implementation of an artificial neuron, we propose to employ voltage control of magnetic anisotropy or voltage generated strain as an input (spike or sinusoidal) signal, which modulates the perpendicular magnetic anisotropy (PMA). This results in continual expansion and shrinking (i.e. breathing) of a skyrmion core that mimics the subthreshold oscillation. Any subsequent input pulse having an interval close to the breathing period or a sinusoidal input close to the eigen frequency drives the magnetization dynamics of the fixed skyrmion in a resonant manner. The time varying electrical resistance of the MTJ layer due to this resonant oscillation of the skyrmion core is used to drive a Complementary Metal Oxide Semiconductor (CMOS) buffer circuit, which produces spike outputs. By rigorous micromagnetic simulation, we investigate the interspike timing dependence and response to different excitatory and inhibitory incoming input pulses. Finally, we show that such resonate and fire neurons have potential application in coupled nanomagnetic oscillator based associative memory arrays.
△ Less
Submitted 31 May, 2018;
originally announced June 2018.
-
A simple model for in- and out-of-plane resistivities of hole doped cuprates
Authors:
S. H. Naqib,
M. Afsana Azam,
M. Borhan Uddin,
J. R. Cole
Abstract:
The highly anisotropic and qualitatively different nature of in- and out-of-plane charge dynamics in high-Tc cuprates cannot be accommodated within the conventional Boltzmann transport theory. The variation of in- and out-of-plane resistivities with temperature and hole content are also anomalous and cannot be explained by Fermi-liquid theory. In this study we have proposed a simple phenomenologic…
▽ More
The highly anisotropic and qualitatively different nature of in- and out-of-plane charge dynamics in high-Tc cuprates cannot be accommodated within the conventional Boltzmann transport theory. The variation of in- and out-of-plane resistivities with temperature and hole content are also anomalous and cannot be explained by Fermi-liquid theory. In this study we have proposed a simple phenomenological model for the dc resistivity of cuprates by incorporating two firmly established generic features of all hole doped cuprate superconductors- (1) the pseudogap in the quasiparticle energy spectrum and (2) the T-linear resistivity at high temperatures. This T-linear behavior over an extended temperature range can be attributed to a quantum criticality, affecting the electronic phase diagram of cuprates. Experimental in-plane and out-of-plane resistivities of double layer Y(Ca)123 have been analyzed using the proposed model. This phenomenological model describes the temperature and hole content dependent resistivity over a wide range of temperature and hole content.
△ Less
Submitted 5 September, 2015; v1 submitted 3 September, 2015;
originally announced September 2015.
-
Experimental signatures of cosmological neutrino condensation
Authors:
Mofazzal Azam,
Jitesh R. Bhatt,
Utpal Sarkar
Abstract:
Superfluid condensation of neutrinos of cosmological origin at a low enough temperature can provide simple and elegant solution to the problems of neutrino oscillations and the accelerated expansion of the universe. It would give rise to a late time cosmological constant of small magnitude and also generate tiny Majorana masses for the neutrinos as observed from their flavor oscillations. We show…
▽ More
Superfluid condensation of neutrinos of cosmological origin at a low enough temperature can provide simple and elegant solution to the problems of neutrino oscillations and the accelerated expansion of the universe. It would give rise to a late time cosmological constant of small magnitude and also generate tiny Majorana masses for the neutrinos as observed from their flavor oscillations. We show that carefully prepared beta decay experiments in the laboratory would carry signatures of such a condensation, and thus, it would be possible to either establish or rule out neutrino condensation of cosmological scale in laboratory experiments.
△ Less
Submitted 2 November, 2010; v1 submitted 31 August, 2010;
originally announced August 2010.
-
Divergence of the $1/N_f$ series expansion in QED
Authors:
Mofazzal Azam
Abstract:
The perturbative expansion series in coupling constant in QED is divergent. It is either an asymptotic series or an arrangement of a conditionally convergent series. The sum of these types of series depends on the way we arrange partial sums for successive approximations. The $1/N_f$ series expansion, where $N_f$ is the number of flavours, defines a rearrangement of this series, and therefore, i…
▽ More
The perturbative expansion series in coupling constant in QED is divergent. It is either an asymptotic series or an arrangement of a conditionally convergent series. The sum of these types of series depends on the way we arrange partial sums for successive approximations. The $1/N_f$ series expansion, where $N_f$ is the number of flavours, defines a rearrangement of this series, and therefore, its convergence would serve as a proof that the perturbative series is, in fact, conditionallyconvergent.Unfortunately, the $1/N_f$ series also diverges.We proof this usingarguments similar to those of Dyson.
We expect that some of the ideas and techniques discussed in our paper will find some use in finding the true nature of the perturbative series in coupling constant as well as the $1/N_f$ expansion series.
△ Less
Submitted 4 April, 2005; v1 submitted 7 October, 2004;
originally announced October 2004.
-
Landau Singularity and the Instability of Vacuum State in QED
Authors:
Mofazzal Azam
Abstract:
In this paper, we argue that the Landau singularity of the coupling constant in QED reflects the instability of vacuum state, in other words the perturbative ground state in QED.We do not have a rigorous mathematical proof. We rather provide strong arguments derived from the theory of stability of matter developed by Lieb et al on the hand and the theory of weakly interacting fermion systems dev…
▽ More
In this paper, we argue that the Landau singularity of the coupling constant in QED reflects the instability of vacuum state, in other words the perturbative ground state in QED.We do not have a rigorous mathematical proof. We rather provide strong arguments derived from the theory of stability of matter developed by Lieb et al on the hand and the theory of weakly interacting fermion systems developed by Feldman et al on the other hand.
△ Less
Submitted 27 October, 2003; v1 submitted 7 September, 2001;
originally announced September 2001.