-
Strain Engineering for High-Performance Phase Change Memristors
Authors:
Wenhui Hou,
Ahmad Azizimanesh,
Aditya Dey,
Yufeng Yang,
Wuxiucheng Wang,
Chen Shao,
Hui Wu,
Hesam Askari,
Sobhit Singh,
Stephen M. Wu
Abstract:
A new mechanism for memristive switching in 2D materials is through electric-field controllable electronic/structural phase transitions, but these devices have not outperformed status quo 2D memristors. Here, we report a high-performance bipolar phase change memristor from strain engineered multilayer 1T'-MoTe$_{2}$ that now surpasses the performance metrics (on/off ratio, switching voltage, switc…
▽ More
A new mechanism for memristive switching in 2D materials is through electric-field controllable electronic/structural phase transitions, but these devices have not outperformed status quo 2D memristors. Here, we report a high-performance bipolar phase change memristor from strain engineered multilayer 1T'-MoTe$_{2}$ that now surpasses the performance metrics (on/off ratio, switching voltage, switching speed) of all 2D memristive devices, achieved without forming steps. Using process-induced strain engineering, we directly pattern stressed metallic contacts to induce a semimetallic to semiconducting phase transition in MoTe2 forming a self-aligned vertical transport memristor with semiconducting MoTe$_{2}$ as the active region. These devices utilize strain to bring them closer to the phase transition boundary and achieve ultra-low ~90 mV switching voltage, ultra-high ~10$^8$ on/off ratio, 5 ns switching, and retention of over 10$^5$ s. Engineered tunability of the device switching voltage and on/off ratio is also achieved by varying the single process parameter of contact metal film force (film stress $\times$ film thickness).
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
Subsurface pulse, crater and ejecta asymmetry from oblique impacts into granular media
Authors:
Bingcheng Suo,
A. C. Quillen,
Max Neiderbach,
Luke O'Brient,
Abobakar Sediq Miakhel,
Nathan Skerrett,
Jérémy Couturier,
Victor Lherm,
Jiaxin Wang,
Hesam Askari,
Esteban Wright,
Paul Sánchez
Abstract:
We carry out experiments of 104 m/s velocity oblique impacts into a granular medium (sand). Impact craters have nearly round rims even at a grazing angle of about $10^\circ$, however, the strength of seismic pulses excited by the impact is dependent upon impact angle, and the ratio between uprange and downrange velocity peaks can be as large as 5, particularly at shallow depths. Crater slope, an o…
▽ More
We carry out experiments of 104 m/s velocity oblique impacts into a granular medium (sand). Impact craters have nearly round rims even at a grazing angle of about $10^\circ$, however, the strength of seismic pulses excited by the impact is dependent upon impact angle, and the ratio between uprange and downrange velocity peaks can be as large as 5, particularly at shallow depths. Crater slope, an offset between crater center and impact site, crater volume, azimuthal variation in ejection angle, seismic pulse shapes and subsurface flow direction are also sensitive to impact angle, but to a much lower degree than subsurface pulse strength. Uprange and downrange pulse peak amplitudes can be estimated from the horizontal and vertical components of the momentum imparted to the medium from the projectile
△ Less
Submitted 22 September, 2023; v1 submitted 3 August, 2023;
originally announced August 2023.
-
Froude number scaling unifies impact trajectories into granular media across gravitational conditions
Authors:
Peter M. Miklavcic,
Ethan Tokar,
Esteban Wright,
Paul Sanchez,
Rachel Glade,
Alice Quillen,
Hesam Askari
Abstract:
The interactions of solid objects with granular media is countered by a resistance force that stems from frictional forces between the grains and the media's resistance to inertia imposed by the intruder. Earlier theories of granular intrusion have suggested an additive contribution of these two families of forces and had tremendous success in predicting resistive forces on arbitrary shaped object…
▽ More
The interactions of solid objects with granular media is countered by a resistance force that stems from frictional forces between the grains and the media's resistance to inertia imposed by the intruder. Earlier theories of granular intrusion have suggested an additive contribution of these two families of forces and had tremendous success in predicting resistive forces on arbitrary shaped objects. However, it remains unclear how these forces are influenced by gravitational conditions. We examine the role of gravity on surface impact behavior into cohesionless granular media using hundreds of soft-sphere discrete element simulations, we demonstrate that the outcome of impacts remain qualitatively similar under varying gravitational conditions if initial velocities are scaled with the Froude number, suggesting an underlying law. Using theoretical arguments, we provide reasoning for the observed universality and show that there is a hidden dependency in resistive forces into granular media on Froude number. Following the theoretical framework, we show that Froude number scaling precisely collapses impact trajectories across gravitational conditions, setting the foundation for explorations in granular behavior beyond Earth.
△ Less
Submitted 20 July, 2023;
originally announced July 2023.
-
Variability estimation in a non-linear crack growth simulation model with controlled parameters using Designed Experiments testing
Authors:
Seungju Yeoa,
Paul Funkenbuscha,
Hesam Askari
Abstract:
Variability in multiple independent input parameters makes it difficult to estimate the resultant variability in the system's overall response. The Propagation of Errors and Monte-Carlo techniques are two major methods to predict the variability of a system. However, in the former method, the formalism can lead to an inaccurate estimate for systems that have parameters varying over a wide range. F…
▽ More
Variability in multiple independent input parameters makes it difficult to estimate the resultant variability in the system's overall response. The Propagation of Errors and Monte-Carlo techniques are two major methods to predict the variability of a system. However, in the former method, the formalism can lead to an inaccurate estimate for systems that have parameters varying over a wide range. For the latter, the results give a direct estimate of the variance of the response, but for complex systems with many parameters, the number of trials necessary to yield an accurate estimate can be very large to the point the technique becomes impractical. In this study, the effectiveness of the Tolerance Design method to estimate variability in complex systems is studied. We use a linear elastic 3 point bending beam model and a nonlinear extended finite elements crack growth model to test and compare the PE and MC methods with the TD method. Results from an MC estimate, using 10,000 trials, serve as a reference to validate the result in both cases. We find that the PE method works suboptimal for a coefficient of variance above 5% in the input variables. In addition, we find that the TD method works very well with moderately sized trials of designed experiment for both models. Our results demonstrate how the variability estimation methods perform in the deterministic domain of numerical simulations and can assist in designing physical tests by providing a guideline performance measure.
△ Less
Submitted 19 July, 2023;
originally announced July 2023.
-
An atomistic insight into moiré reconstruction in Twisted Bilayer Graphene beyond the magic angle
Authors:
Aditya Dey,
Shoieb Ahmed Chowdhury,
Tara Peña,
Sobhit Singh,
Stephen M. Wu,
Hesam Askari
Abstract:
Twisted bilayer graphene exhibits electronic properties that are highly correlated with the size and arrangement of moiré patterns. While rigid rotation of two layers creates the topology of moiré patterns, local rearrangements of the atoms due to interlayer van der Waals interactions result in atomic reconstruction within the moiré cells. The ability to manipulate these patterns by controlling tw…
▽ More
Twisted bilayer graphene exhibits electronic properties that are highly correlated with the size and arrangement of moiré patterns. While rigid rotation of two layers creates the topology of moiré patterns, local rearrangements of the atoms due to interlayer van der Waals interactions result in atomic reconstruction within the moiré cells. The ability to manipulate these patterns by controlling twist angle and/or externally applied strain provides a promising route to tune their properties. While this phenomenon has been extensively studied for angles close to or smaller than the magic angle (θm=1.1°), its extent for higher angles and how it evolves with strain is unknown and is believed to be mostly absent at high angles. We use theoretical and numerical analyses to resolve reconstruction in angles above θm using interpretive and fundamental physical measures. In addition, we propose a method to identify local regions within moiré cells and track their evolution with strain for a range of representative high twist angles. Our results show that reconstruction is actively present beyond the magic angle and its contribution to the evolution of the moiré cells is major. Our theoretical method to correlate local and global phonon behavior provides further validation on the role of reconstruction at higher angles. Our findings provide a better understanding of moiré reconstruction in large twist angles and the evolution of moiré cells in the presence of strain, that might be very crucial for twistronics-based applications.
△ Less
Submitted 17 April, 2023; v1 submitted 3 January, 2023;
originally announced January 2023.
-
Moiré Engineering in 2D Heterostructures with Process-Induced Strain
Authors:
Tara Peña,
Aditya Dey,
Shoieb A. Chowdhury,
Ahmad Azizimanesh,
Wenhui Hou,
Arfan Sewaket,
Carla L. Watson,
Hesam Askari,
Stephen M. Wu
Abstract:
We report deterministic control over moiré superlattice interference pattern in twisted bilayer graphene by implementing designable device-level heterostrain with process-induced strain engineering, a widely used technique in industrial silicon nanofabrication processes. By depositing stressed thin films onto our twisted bilayer graphene samples, heterostrain magnitude and strain directionality ca…
▽ More
We report deterministic control over moiré superlattice interference pattern in twisted bilayer graphene by implementing designable device-level heterostrain with process-induced strain engineering, a widely used technique in industrial silicon nanofabrication processes. By depositing stressed thin films onto our twisted bilayer graphene samples, heterostrain magnitude and strain directionality can be controlled by stressor film force (film stress x film thickness) and patterned stressor geometry, respectively. We examine strain and moiré interference with Raman spectroscopy through in-plane and moiré-activated phonon mode shifts. Results support systematic C$_{3}$ rotational symmetry breaking and tunable periodicity in moiré superlattices under the application of uniaxial or biaxial heterostrain. Experimental results are validated by molecular statics simulations and density functional theory based first principles calculations. This provides a method to not only tune moiré interference without additional twisting, but also allows for a systematic pathway to explore different van der Waals based moiré superlattice symmetries by deterministic design.
△ Less
Submitted 3 April, 2023; v1 submitted 7 October, 2022;
originally announced October 2022.
-
Propagation and attenuation of pulses driven by low velocity normal impacts in granular media
Authors:
A. C. Quillen,
Max Neiderbach,
Bingcheng Suo,
Juliana South,
Esteban Wright,
Nathan Skerrett,
Paul Sánchez,
Fernando David Cúñez,
Peter Miklavcic,
Heesam Askari
Abstract:
We carry out experiments of low velocity normal impacts into granular materials that fill an approximately cylindrical 42 litre tub. Motions in the granular medium are tracked with an array of 7 embedded accelerometers. Longitudinal pulses excited by the impact attenuate and their shapes broaden and become smoother as a function of travel distance from the site of impact. Pulse propagation is not…
▽ More
We carry out experiments of low velocity normal impacts into granular materials that fill an approximately cylindrical 42 litre tub. Motions in the granular medium are tracked with an array of 7 embedded accelerometers. Longitudinal pulses excited by the impact attenuate and their shapes broaden and become smoother as a function of travel distance from the site of impact. Pulse propagation is not spherically symmetric about the site of impact. Peak amplitudes are about twice as large for the pulse propagating downward than at 45 degrees from vertical. An advection-diffusion model is used to estimate the dependence of pulse properties as a function of travel distance from the site of impact. The power law forms for pulse peak pressure, velocity and seismic energy depend on distance from impact to a power of -2.5 and this rapid decay is approximately consistent with our experimental measurements. Our experiments support a seismic jolt model, giving rapid attenuation of impact generated seismic energy into rubble asteroids, rather than a reverberation model, where seismic energy slowly decays. We apply our diffusive model to estimate physical properties of the seismic pulse that will be excited by the forthcoming DART mission impact onto the secondary, Dimorphos, of the asteroid binary (65803) Didymos system. We estimate that the pulse peak acceleration will exceed the surface gravity as it travels through the asteroid.
△ Less
Submitted 1 August, 2022; v1 submitted 4 January, 2022;
originally announced January 2022.
-
Strain Engineering 2D MoS$_{2}$ with Thin Film Stress Cap** Layers
Authors:
Tara Peña,
Shoieb A. Chowdhury,
Ahmad Azizimanesh,
Arfan Sewaket,
Hesam Askari,
Stephen M. Wu
Abstract:
We demonstrate a method to induce tensile and compressive strain into two-dimensional transition metal dichalcogenide (TMDC) MoS$_{2}$ via the deposition of stressed thin films to encapsulate exfoliated flakes. With this technique we can directly engineer MoS$_{2}$ strain magnitude by changing deposited thin film stress, therefore allowing variable strain to be applied on a flake-to-flake level. T…
▽ More
We demonstrate a method to induce tensile and compressive strain into two-dimensional transition metal dichalcogenide (TMDC) MoS$_{2}$ via the deposition of stressed thin films to encapsulate exfoliated flakes. With this technique we can directly engineer MoS$_{2}$ strain magnitude by changing deposited thin film stress, therefore allowing variable strain to be applied on a flake-to-flake level. These thin film stressors are analogous to SiN$_{x}$ based stressors implemented in industrial CMOS processes to enhance Si mobility, suggesting that our concept is highly scalable and may be applied for large-scale integration of strain engineered TMDC devices. We choose optically transparent stressors to allow us to probe MoS$_{2}$ strain through Raman spectroscopy. Combining thickness dependent analyses of Raman peak shifts in MoS$_{2}$ with atomistic simulations, we can explore layer-by-layer strain transfer. MoS$_{2}$ on conventional substrates (SiO$_{2}$, MgO) show strain transfer into the top two layers of multilayer flakes with limited strain transfer to monolayers due to substrate adhesion. To mitigate this limitation, we also explore stressors on van der Waals heterostructures constructed of monolayer (1L) MoS$_{2}$ on hexagonal boron nitride (h-BN). This concept frees the 1L-MoS$_{2}$ allowing for a 0.85$\%$ strain to be applied to the monolayer with a corresponding strain induced bandgap change of 75 meV. By using thin films with higher stress, strain may be engineered to be even higher. Various stressors and deposition methods are considered, showing a stressor material independent transfer of strain that only depends on stressor film force with negligible defects induced into MoS$_{2}$ when thermal evaporation is used.
△ Less
Submitted 14 July, 2021; v1 submitted 22 September, 2020;
originally announced September 2020.
-
Strain-Based Room-Temperature Non-Volatile MoTe$_2$ Ferroelectric Phase Change Transistor
Authors:
Wenhui Hou,
Ahmad Azizimanesh,
Arfan Sewaket,
Tara Peña,
Carla Watson,
Ming Liu,
Hesam Askari,
Stephen M. Wu
Abstract:
The primary mechanism of operation of almost all transistors today relies on electric-field effect in a semiconducting channel to tune its conductivity from the conducting 'on'-state to a non-conducting 'off'-state. As transistors continue to scale down to increase computational performance, physical limitations from nanoscale field-effect operation begin to cause undesirable current leakage that…
▽ More
The primary mechanism of operation of almost all transistors today relies on electric-field effect in a semiconducting channel to tune its conductivity from the conducting 'on'-state to a non-conducting 'off'-state. As transistors continue to scale down to increase computational performance, physical limitations from nanoscale field-effect operation begin to cause undesirable current leakage that is detrimental to the continued advancement of computing. Using a fundamentally different mechanism of operation, we show that through nanoscale strain engineering with thin films and ferroelectrics (FEs) the transition metal dichalcogenide (TMDC) MoTe$_2$ can be reversibly switched with electric-field induced strain between the 1T'-MoTe$_2$ (semimetallic) phase to a semiconducting MoTe$_2$ phase in a field effect transistor geometry. This alternative mechanism for transistor switching sidesteps all the static and dynamic power consumption problems in conventional field-effect transistors (FETs). Using strain, we achieve large non-volatile changes in channel conductivity (G$_{on}$/G$_{off}$~10$^7$ vs. G$_{on}$/G$_{off}$~0.04 in the control device) at room temperature. Ferroelectric devices offer the potential to reach sub-ns nonvolatile strain switching at the attojoule/bit level, having immediate applications in ultra-fast low-power non-volatile logic and memory while also transforming the landscape of computational architectures since conventional power, speed, and volatility considerations for microelectronics may no longer exist.
△ Less
Submitted 17 May, 2019;
originally announced May 2019.
-
A Light-weight Vibrational Motor Powered Recoil Robot that Hops Rapidly Across Granular Media
Authors:
Alice C. Quillen,
Randal C. Nelson,
Hesam Askari,
Kathryn Chotkowski,
Esteban Wright,
Jessica K. Shang
Abstract:
A 1 cm coin vibrational motor fixed to the center of a 4 cm square foam platform moves rapidly across granular media (poppy seeds, millet, corn meal) at a speed of up to 30 cm/s, or about 5 body lengths/s. Fast speeds are achieved with dimensionless acceleration number, similar to a Froude number, up to 50, allowing the light-weight 1.4 g mechanism to remain above the substrate, levitated and prop…
▽ More
A 1 cm coin vibrational motor fixed to the center of a 4 cm square foam platform moves rapidly across granular media (poppy seeds, millet, corn meal) at a speed of up to 30 cm/s, or about 5 body lengths/s. Fast speeds are achieved with dimensionless acceleration number, similar to a Froude number, up to 50, allowing the light-weight 1.4 g mechanism to remain above the substrate, levitated and propelled by its kicks off the surface. The mechanism is low cost and moves without any external moving parts. With 2 s exposures we photograph the trajectory of the mechanism using an LED blocked except for a pin-hole and fixed to the mechanism. Trajectories can exhibit period doubling phenomena similar to a ball bouncing on a vibrating table top. A two dimensional numerical model gives similar trajectories, though a vertical drag force is required to keep the mechanism height low. We attribute the vertical drag force to aerodynamic suction from air flow below the mechanism base and through the granular substrate. Our numerical model suggests that speed is maximized when the mechanism is prevented from jum** high off the surface. In this way the mechanism resembles a gallo** or jum** animal whose body remains nearly at the same height above the ground during its gait.
△ Less
Submitted 23 September, 2018;
originally announced October 2018.
-
Intrusion in heterogeneous materials: Simple global rules from complex micro-mechanics
Authors:
Hesam Askari,
Ken Kamrin
Abstract:
The interaction of intruding objects with deformable materials is a common phenomenon, arising in impact and penetration problems, animal and vehicle locomotion, and various geo-space applications. The dynamics of arbitrary intruders can be simplified using Resistive Force Theory (RFT), an empirical framework originally used for fluids but works surprisingly well, better in fact, in granular mater…
▽ More
The interaction of intruding objects with deformable materials is a common phenomenon, arising in impact and penetration problems, animal and vehicle locomotion, and various geo-space applications. The dynamics of arbitrary intruders can be simplified using Resistive Force Theory (RFT), an empirical framework originally used for fluids but works surprisingly well, better in fact, in granular materials. That such a simple model describes behavior in dry grains, a complex nonlinear material, has invigorated a search to determine the underlying mechanism of RFT. We have discovered that a straightforward friction-based continuum model generates RFT, establishing a link between RFT and local material behavior. Our theory reproduces experimental RFT data without any parameter fitting and generates RFT's key simplifying assumption: a geometry-independent local force formula. Analysis of the system explains why RFT works better in grains than in viscous fluids, and leads to an analytical criterion to predict RFT's in other materials.
△ Less
Submitted 10 October, 2015;
originally announced October 2015.
-
Electrical and optical properties of ITO thin films prepared by DC magnetron sputtering for low-emitting coatings
Authors:
Hadi Askari,
Hamidreza Fallah,
Mehdi Askari,
Mehdi Charkhchi Mohmmadieyh
Abstract:
Optimized DC magnetron sputtering system for the deposition of transparent conductive oxides (TCOs), such indium tin oxide (ITO) on glass substrate has been applied in order to achieve low-emitting (low-e) transparent coatings. To obtain the concerned electrical resistance and high infrared reflection, first the effect of applied sputtering power then oxygen flow on the properties of films have be…
▽ More
Optimized DC magnetron sputtering system for the deposition of transparent conductive oxides (TCOs), such indium tin oxide (ITO) on glass substrate has been applied in order to achieve low-emitting (low-e) transparent coatings. To obtain the concerned electrical resistance and high infrared reflection, first the effect of applied sputtering power then oxygen flow on the properties of films have been investigated. The other depositions parameters are kept constant. Film deposition at at temperature 400 degree of Celsius in oxygen flow of 3 Standard Cubic Centimeters per Minute results in transparent and infrared reflecting coatings. Under this condition the highest attained average reflectance in the infrared is (λ=3-25 micron) 89.5% (lowest emittance equals to less than 11%), whereas transparency in the visible is 85% approximately. Plasma wavelength and carrier concentration was measured.
△ Less
Submitted 18 September, 2014;
originally announced September 2014.