-
Evaluating and improving the predictive accuracy of mixing enthalpies and volumes in disordered alloys from universal pre-trained machine learning potentials
Authors:
Luis Casillas-Trujillo,
Abhijith S. Parackal,
Rickard Armiento,
Björn Alling
Abstract:
The advent of machine learning in materials science opens the way for exciting and ambitious simulations of large systems and long time scales with the accuracy of ab-initio calculations. Recently, several pre-trained universal machine learned interatomic potentials (UPMLIPs) have been published, i.e., potentials distributed with a single set of weights trained to target systems across a very wide…
▽ More
The advent of machine learning in materials science opens the way for exciting and ambitious simulations of large systems and long time scales with the accuracy of ab-initio calculations. Recently, several pre-trained universal machine learned interatomic potentials (UPMLIPs) have been published, i.e., potentials distributed with a single set of weights trained to target systems across a very wide range of chemistries and atomic arrangements. These potentials raise the hope of reducing the computational cost and methodological complexity of performing simulations compared to models that require for-purpose training. However, the application of these models needs critical evaluation to assess their usability across material types and properties. In this work, we investigate the application of the following UPMLIPs: MACE, CHGNET, and M3GNET to the context of alloy theory. We calculate the mixing enthalpies and volumes of 21 binary alloy systems and compare the results with DFT calculations to assess the performance of these potentials over different properties and types of materials. We find that small relative energies necessary to correctly predict mixing energies are generally not reproduced by these methods with sufficient accuracy to describe correct mixing behaviors. However, the performance can be significantly improved by supplementing the training data with relevant training data. The potentials can also be used to partially accelerate these calculations by replacing the ab-initio structural relaxation step.
△ Less
Submitted 27 June, 2024; v1 submitted 25 June, 2024;
originally announced June 2024.
-
Predicting the Curie temperature of magnetic materials with automated calculations across chemistries and structures
Authors:
Marian Arale Brännvall,
Gabriel Persson,
Luis Casillas-Trujillo,
Rickard Armiento,
Björn Alling
Abstract:
We develop a technique for predicting the Curie temperature of magnetic materials using density functional theory calculations suitable to include in high-throughput frameworks. We apply four different models, including physically relevant observables and assess numerical constants by studying 32 ferro- and ferrimagnets. With the best-performing model, the Curie temperature can be predicted with a…
▽ More
We develop a technique for predicting the Curie temperature of magnetic materials using density functional theory calculations suitable to include in high-throughput frameworks. We apply four different models, including physically relevant observables and assess numerical constants by studying 32 ferro- and ferrimagnets. With the best-performing model, the Curie temperature can be predicted with a mean absolute error of approximately 126 K. As predictive factors, the models consider either the energy differences between the magnetic ground state and a magnetically disordered paramagnetic state, or the average constraining fields acting on magnetic moments in a disordered local moments calculation. Additionally, the energy differences are refined by incorporating the magnetic entropy of the paramagnetic state and the number of nearest magnetic neighbors of the magnetic atoms. The most advanced model is found to extend well into Fe$_{1-x}$Co$_x$ alloys, indicating the potential efficacy of utilizing our model in designing materials with tailored Curie temperatures by altering alloy compositions. This examination can illuminate the factors influencing magnetic transition temperatures in magnetic materials and provide insights into how they can be employed to make quantitative predictions of Curie temperatures. Our approach is not restricted to specific crystal structures or chemical compositions. It offers a more cost-effective alternative, in terms of human time and need for hands-on oversight, to other density functional theory methods for predicting the Curie temperature. As a result, it provides a practical strategy for conducting high-throughput screening for new technologically applicable magnetic materials. Alternatively, it can complement ML-based screening of magnetic materials by integrating physical principles into such approaches, thereby enhancing their prediction accuracy.
△ Less
Submitted 4 June, 2024;
originally announced June 2024.
-
Developments and applications of the OPTIMADE API for materials discovery, design, and data exchange
Authors:
Matthew L. Evans,
Johan Bergsma,
Andrius Merkys,
Casper W. Andersen,
Oskar B. Andersson,
Daniel Beltrán,
Evgeny Blokhin,
Tara M. Boland,
Rubén Castañeda Balderas,
Kamal Choudhary,
Alberto Díaz Díaz,
Rodrigo Domínguez García,
Hagen Eckert,
Kristjan Eimre,
María Elena Fuentes Montero,
Adam M. Krajewski,
Jens Jørgen Mortensen,
José Manuel Nápoles Duarte,
Jacob Pietryga,
Ji Qi,
Felipe de Jesús Trejo Carrillo,
Antanas Vaitkus,
Jusong Yu,
Adam Zettel,
Pedro Baptista de Castro
, et al. (34 additional authors not shown)
Abstract:
The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 relea…
▽ More
The Open Databases Integration for Materials Design (OPTIMADE) application programming interface (API) empowers users with holistic access to a growing federation of databases, enhancing the accessibility and discoverability of materials and chemical data. Since the first release of the OPTIMADE specification (v1.0), the API has undergone significant development, leading to the upcoming v1.2 release, and has underpinned multiple scientific studies. In this work, we highlight the latest features of the API format, accompanying software tools, and provide an update on the implementation of OPTIMADE in contributing materials databases. We end by providing several use cases that demonstrate the utility of the OPTIMADE API in materials research that continue to drive its ongoing development.
△ Less
Submitted 5 April, 2024; v1 submitted 1 February, 2024;
originally announced February 2024.
-
Identifying Crystal Structures Beyond Known Prototypes from X-ray Powder Diffraction Spectra
Authors:
Abhijith S. Parackal,
Rhys E. A. Goodall,
Felix A. Faber,
Rickard Armiento
Abstract:
The large amount of powder diffraction data for which the corresponding crystal structures have not yet been identified suggests the existence of numerous undiscovered, physically relevant crystal structure prototypes. In this paper, we present a scheme to resolve powder diffraction data into crystal structures with precise atomic coordinates by screening the space of all possible atomic arrangeme…
▽ More
The large amount of powder diffraction data for which the corresponding crystal structures have not yet been identified suggests the existence of numerous undiscovered, physically relevant crystal structure prototypes. In this paper, we present a scheme to resolve powder diffraction data into crystal structures with precise atomic coordinates by screening the space of all possible atomic arrangements, i.e., structural prototypes, including those not previously observed, using a pre-trained machine learning (ML) model. This involves (i) enumerating all possible symmetry-confined ways in which a given composition can be accommodated in a given spacegroup, (ii) ranking the element-assigned prototype representations using energies predicted using the Wren ML model [Sci.Adv.8, eabn4117 (2022)], (iii) assigning and perturbing atoms along the degree of freedom allowed by the Wyckoff positions to match the experimental diffraction data (iv) validating the thermodynamic stability of the material using density-functional theory (DFT). An advantage of the presented method is that it does not rely on a database of previously observed prototypes and is, therefore capable of finding crystal structures with entirely new symmetric arrangements of atoms. We demonstrate the workflow on unidentified XRD spectra from the ICDD database and identify a number of stable structures, where a majority turns out to be derivable from known prototypes. However, at least two are found not to be part of our prior structural data sets.
△ Less
Submitted 14 May, 2024; v1 submitted 28 September, 2023;
originally announced September 2023.
-
ADAQ-SYM: Automated Symmetry Analysis of Defect Orbitals
Authors:
William Stenlund,
Joel Davidsson,
Viktor Ivády,
Rickard Armiento,
Igor A. Abrikosov
Abstract:
Quantum technologies like single photon emitters and qubits can be enabled by point defects in semiconductors, with the NV-center in diamond being the most prominent example. There are many different semiconductors, each potentially hosting interesting defects. The symmetry properties of the point defect orbitals can yield useful information about the behavior of the system, such as the interactio…
▽ More
Quantum technologies like single photon emitters and qubits can be enabled by point defects in semiconductors, with the NV-center in diamond being the most prominent example. There are many different semiconductors, each potentially hosting interesting defects. The symmetry properties of the point defect orbitals can yield useful information about the behavior of the system, such as the interaction with polarized light. We have developed a tool to perform symmetry analysis of point defect orbitals obtained by plane-wave density functional theory simulations. The software tool, named ADAQ-SYM, calculates the characters for each orbital, finds the irreducible representations, and uses selection rules to find which optical transitions are allowed. The capabilities of ADAQ-SYM are demonstrated on several defects in diamond and 4H-SiC. The symmetry analysis explains the different zero phonon line (ZPL) polarization of the hk and kh divacancies in 4H-SiC.
△ Less
Submitted 26 April, 2024; v1 submitted 10 July, 2023;
originally announced July 2023.
-
Na in Diamond: High Spin Defects Revealed by the ADAQ High-Throughput Computational Database
Authors:
Joel Davidsson,
William Stenlund,
Abhijith S Parackal,
Rickard Armiento,
Igor A. Abrikosov
Abstract:
Color centers in diamond are at the forefront of the second quantum revolution. A handful of defects are in use, and finding ones with all the desired properties for quantum applications is arduous. By using high-throughput calculations, we screen 21607 defects in diamond and collect the results in the ADAQ database. Upon exploring this database, we find not only the known defects but also several…
▽ More
Color centers in diamond are at the forefront of the second quantum revolution. A handful of defects are in use, and finding ones with all the desired properties for quantum applications is arduous. By using high-throughput calculations, we screen 21607 defects in diamond and collect the results in the ADAQ database. Upon exploring this database, we find not only the known defects but also several unexplored defects. Specifically, defects containing sodium stand out as particularly relevant because of their high spins and predicted improved optical properties compared to the NV center. Hence, we studied these in detail, employing high-accuracy theoretical calculations. The single sodium substitutional (Na$\mathrm{_C}$) has various charge states with spin ranging from 0.5 to 1.5, ZPL in the near-infrared, and a high Debye-Waller factor, making it ideal for biological quantum applications. The sodium vacancy (NaV) has a ZPL in the visible region and a potential rare spin-2 ground state. Our results show sodium implantation yields many interesting spin defects that are valuable additions to the arsenal of point defects in diamond studied for quantum applications.
△ Less
Submitted 11 June, 2024; v1 submitted 19 June, 2023;
originally announced June 2023.
-
The Chlorine Vacancy in 4H-SiC: An NV-like Defect With Telecom Emission
Authors:
Oscar Bulancea-Lindvall,
Joel Davidsson,
Rickard Armiento,
Igor A. Abrikosov
Abstract:
The diamond nitrogen vacancy (NV) center remains an ever increasing topic of interest. At present, it is considered an ideal example of a solid-state qubit applicable in quantum communication, computing, and sensing alike. With its success, the search for defects that share or improve upon its advantageous features is an ongoing endeavor. By performing large-scale high-throughput screening of 5260…
▽ More
The diamond nitrogen vacancy (NV) center remains an ever increasing topic of interest. At present, it is considered an ideal example of a solid-state qubit applicable in quantum communication, computing, and sensing alike. With its success, the search for defects that share or improve upon its advantageous features is an ongoing endeavor. By performing large-scale high-throughput screening of 52600 defects in 4H silicon carbide (SiC), we identify a collection of NV-like color-centers of particular interest. From this list, the single most promising candidate consists of a silicon vacancy and chlorine substituted on the carbon site, and is given the name of the chlorine vacancy (ClV) center. Through high-accuracy first-principle calculations, we confirm that the ClV center is similar to the NV center in diamond in its local structure and shares many qualitative and quantitative features in the electronic structure and spin properties. In contrast to the NV center, however, the ClV center in SiC exhibits emission in the telecom range near the C-band.
△ Less
Submitted 27 April, 2023;
originally announced April 2023.
-
Absorption $\textit{versus}$ Adsorption: High-Throughput Computation of Impurities in 2D Materials
Authors:
Joel Davidsson,
Fabian Bertoldo,
Kristian S. Thygesen,
Rickard Armiento
Abstract:
Do** of a two-dimensional (2D) material by impurity atoms occurs \textit{via} two distinct mechanisms: absorption of the dopants by the 2D crystal or adsorption on its surface. To distinguish the relevant mechanism, we systematically dope 53 experimentally synthesized 2D monolayers by 65 different chemical elements in both absorption and adsorption sites. The resulting 17,598 doped monolayer str…
▽ More
Do** of a two-dimensional (2D) material by impurity atoms occurs \textit{via} two distinct mechanisms: absorption of the dopants by the 2D crystal or adsorption on its surface. To distinguish the relevant mechanism, we systematically dope 53 experimentally synthesized 2D monolayers by 65 different chemical elements in both absorption and adsorption sites. The resulting 17,598 doped monolayer structures were generated using the newly developed ASE \texttt{DefectBuilder} -- a Python tool to set up point defects in 2D and bulk materials -- and subsequently relaxed by an automated high-throughput density functional theory (DFT) workflow. We find that interstitial positions are preferred for small dopants with partially filled valence electrons in host materials with large lattice parameters. On the contrary, adatoms are favored for dopants with a low number of valence electrons due to lower coordination of adsorption sites compared to interstitials. The relaxed structures, characterization parameters, defect formation energies, and magnetic moments (spins) are available in an open database to help advance our understanding of defects in 2D materials.
△ Less
Submitted 3 April, 2023; v1 submitted 12 July, 2022;
originally announced July 2022.
-
Exhaustive characterization of modified Si vacancies in 4H-SiC
Authors:
Joel Davidsson,
Rohit Babar,
Danial Shafizadeh,
Ivan G. Ivanov,
Viktor Ivády,
Rickard Armiento,
Igor A. Abrikosov
Abstract:
The negatively charged silicon vacancy ($\mathrm{V_{Si}^-}$) in silicon carbide is a well-studied point defect for quantum applications. At the same time, a closer inspection of ensemble photoluminescence and electron paramagnetic resonance measurements reveals an abundance of related but so far unidentified signals. In this study, we search for defects in 4H-SiC that explain the above magneto-opt…
▽ More
The negatively charged silicon vacancy ($\mathrm{V_{Si}^-}$) in silicon carbide is a well-studied point defect for quantum applications. At the same time, a closer inspection of ensemble photoluminescence and electron paramagnetic resonance measurements reveals an abundance of related but so far unidentified signals. In this study, we search for defects in 4H-SiC that explain the above magneto-optical signals in a defect database generated by Automatic Defect Analysis and Qualification (ADAQ) workflows. This search reveals only one class of atomic structures that exhibit silicon-vacancy-like properties in the data: a carbon antisite ($\mathrm{C_{Si}}$) within sub-nanometer distances from the silicon vacancy only slightly alters the latter without affecting the charge or spin state. Such a perturbation is energetically bound. We consider the formation of $\mathrm{V_{Si}^-+C_{Si}}$ up to 2 nm distance and report their zero phonon lines and zero field splitting values. In addition, we perform high-resolution photoluminescence experiments in the silicon vacancy region and find an abundance of lines. Comparing our computational and experimental results, several configurations show great agreement. Our work demonstrates the effectiveness of a database with high-throughput results in the search for defects in quantum applications.
△ Less
Submitted 19 October, 2022; v1 submitted 25 May, 2022;
originally announced May 2022.
-
Predicting properties of hard-coating alloys using ab-initio and machine learning methods
Authors:
H. Levämäki,
F. Tasnadi,
D. G. Sangiovanni,
L. J. S. Johnson,
R. Armiento,
I. A. Abrikosov
Abstract:
Accelerated design of novel hard coating materials requires state-of-the-art computational tools, which include data-driven techniques, building databases, and training machine learning models against the databases. In this work, we present a development of a heavily automated high-throughput workflow to build a database of industrially relevant hard coating materials, such as binary and ternary n…
▽ More
Accelerated design of novel hard coating materials requires state-of-the-art computational tools, which include data-driven techniques, building databases, and training machine learning models against the databases. In this work, we present a development of a heavily automated high-throughput workflow to build a database of industrially relevant hard coating materials, such as binary and ternary nitrides. We use Vienna Ab initio Simulation package as the density functional theory calculator and the high-throughput toolkit to automate the calculation workflow. We calculate and present results, including the elastic constants, one of the key materials parameter that determines mechanical properties of the coatings, for X(1-x)Y(x)N binary and ternary nitrides, where X,Y in {Al, Ti, Zr, Hf} and fraction x = 0, 1/4, 1/2, 3/4, 1. We explore ways for ML techniques to support and complement the designed databases. We find that the crystal graph convolutional neural network model trained on Materials Project data for ordered lattices has sufficient prediction accuracy for the disordered nitrides, suggesting that the existing databases provide important data for predicting mechanical properties of qualitatively different type of material systems, in our case hard coating alloys, not included in the original dataset.
△ Less
Submitted 23 November, 2021; v1 submitted 1 November, 2021;
originally announced November 2021.
-
Graph-based machine learning beyond stable materials and relaxed crystal structures
Authors:
Filip Ekström,
Rickard Armiento,
Fredrik Lindsten
Abstract:
There has been a recent surge of interest in using machine learning to approximate density functional theory (DFT) in materials science. However, many of the most performant models are evaluated on large databases of computed properties of, primarily, materials with precise atomic coordinates available, and which have been experimentally synthesized, i.e., which are thermodynamically stable or met…
▽ More
There has been a recent surge of interest in using machine learning to approximate density functional theory (DFT) in materials science. However, many of the most performant models are evaluated on large databases of computed properties of, primarily, materials with precise atomic coordinates available, and which have been experimentally synthesized, i.e., which are thermodynamically stable or metastable. These aspects provide challenges when applying such models on theoretical candidate materials, for example for materials discovery, where the coordinates are not known. To extend the scope of this methodology, we investigate the performance of the Crystal Graph Convolutional Neural Network (CGCNN) on a data set of theoretical structures in three related ternary phase diagrams (Ti,Zr,Hf)-Zn-N, which thus include many highly unstable structures. We then investigate the impact on the performance of using atomic positions that are only partially relaxed into local energy minima. We also explore options for improving the performance in these scenarios by transfer learning, either from models trained on a large database of mostly stable systems, or a different but related phase diagram. Models pre-trained on stable materials do not significantly improve performance, but models trained on similar data transfer very well. We demonstrate how our findings can be utilized to generate phase diagrams with a major reduction in computational effort.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Rapid Discovery of Stable Materials by Coordinate-free Coarse Graining
Authors:
Rhys E. A. Goodall,
Abhijith S. Parackal,
Felix A. Faber,
Rickard Armiento,
Alpha A. Lee
Abstract:
A fundamental challenge in materials science pertains to elucidating the relationship between stoichiometry, stability, structure, and property. Recent advances have shown that machine learning can be used to learn such relationships, allowing the stability and functional properties of materials to be accurately predicted. However, most of these approaches use atomic coordinates as input and are t…
▽ More
A fundamental challenge in materials science pertains to elucidating the relationship between stoichiometry, stability, structure, and property. Recent advances have shown that machine learning can be used to learn such relationships, allowing the stability and functional properties of materials to be accurately predicted. However, most of these approaches use atomic coordinates as input and are thus bottle-necked by crystal structure identification when investigating novel materials. Our approach solves this bottleneck by coarse-graining the infinite search space of atomic coordinates into a combinatorially enumerable search space. The key idea is to use Wyckoff representations -- coordinate-free sets of symmetry-related positions in a crystal -- as the input to a machine learning model. Our model demonstrates exceptionally high precision in discovering new theoretically stable materials, identifying 1,569 materials that lie below the known convex hull of previously calculated materials from just 5,675 ab-initio calculations. Our approach opens up fundamental advances in computational materials discovery.
△ Less
Submitted 15 March, 2022; v1 submitted 21 June, 2021;
originally announced June 2021.
-
Identification of materials with strong magneto-structural coupling using computational high-throughput screening
Authors:
Luis Casillas-Trujillo,
Rickard Armiento,
Björn Alling
Abstract:
Important phenomena such as magnetostriction, magnetocaloric, and magnetoelectric effects arise from, or could be enhanced by, the coupling of magnetic and structural degrees of freedom. The coupling of spin and lattice also influence transport and structural properties in magnetic materials in particular around phase transitions. In this paper we propose a method for screening materials for a str…
▽ More
Important phenomena such as magnetostriction, magnetocaloric, and magnetoelectric effects arise from, or could be enhanced by, the coupling of magnetic and structural degrees of freedom. The coupling of spin and lattice also influence transport and structural properties in magnetic materials in particular around phase transitions. In this paper we propose a method for screening materials for a strong magneto-structural coupling by assessing the effect of the local magnetic configuration on the atomic forces using density functional theory (DFT). We have employed the disordered local moment approach in a supercell formulation to probe different magnetic local configurations and their forces and performed a high-throughput search on binary and ternary compounds available in the Crystallographic Open Database. We identify a list of materials with a strong spin-lattice coupling out of which several are already known to display magneto-lattice coupling-phenomena like Fe3O4 and CrN. Others, such as Mn2CrO4 and CaFe7O11 have been less studied and are yet to reveal their potentials in experiments and applications.
△ Less
Submitted 17 March, 2021;
originally announced March 2021.
-
OPTIMADE, an API for exchanging materials data
Authors:
Casper W. Andersen,
Rickard Armiento,
Evgeny Blokhin,
Gareth J. Conduit,
Shyam Dwaraknath,
Matthew L. Evans,
Ádám Fekete,
Abhijith Gopakumar,
Saulius Gražulis,
Andrius Merkys,
Fawzi Mohamed,
Corey Oses,
Giovanni Pizzi,
Gian-Marco Rignanese,
Markus Scheidgen,
Leopold Talirz,
Cormac Toher,
Donald Winston,
Rossella Aversa,
Kamal Choudhary,
Pauline Colinet,
Stefano Curtarolo,
Davide Di Stefano,
Claudia Draxl,
Suleyman Er
, et al. (31 additional authors not shown)
Abstract:
The Open Databases Integration for Materials Design (OPTIMADE) consortium has designed a universal application programming interface (API) to make materials databases accessible and interoperable. We outline the first stable release of the specification, v1.0, which is already supported by many leading databases and several software packages. We illustrate the advantages of the OPTIMADE API throug…
▽ More
The Open Databases Integration for Materials Design (OPTIMADE) consortium has designed a universal application programming interface (API) to make materials databases accessible and interoperable. We outline the first stable release of the specification, v1.0, which is already supported by many leading databases and several software packages. We illustrate the advantages of the OPTIMADE API through worked examples on each of the public materials databases that support the full API specification.
△ Less
Submitted 25 August, 2021; v1 submitted 2 March, 2021;
originally announced March 2021.
-
ADAQ: Automatic workflows for magneto-optical properties of point defects in semiconductors
Authors:
Joel Davidsson,
Viktor Ivády,
Rickard Armiento,
Igor A. Abrikosov
Abstract:
Automatic Defect Analysis and Qualification (ADAQ) is a collection of automatic workflows developed for high-throughput simulations of magneto-optical properties of point defect in semiconductors. These workflows handle the vast number of defects by automating the processes to relax the unit cell of the host material, construct supercells, create point defect clusters, and execute calculations in…
▽ More
Automatic Defect Analysis and Qualification (ADAQ) is a collection of automatic workflows developed for high-throughput simulations of magneto-optical properties of point defect in semiconductors. These workflows handle the vast number of defects by automating the processes to relax the unit cell of the host material, construct supercells, create point defect clusters, and execute calculations in both the electronic ground and excited states. The main outputs are the magneto-optical properties which include zero-phonon lines, zero-field splitting, and hyperfine coupling parameters. In addition, the formation energies are calculated. We demonstrate the capability of ADAQ by performing a complete characterization of the silicon vacancy in silicon carbide in the polytype 4H (4H-SiC).
△ Less
Submitted 9 August, 2021; v1 submitted 28 August, 2020;
originally announced August 2020.
-
Database-driven High-Throughput Calculations and Machine Learning Models for Materials Design
Authors:
Rickard Armiento
Abstract:
This paper reviews past and ongoing efforts in using high-throughput ab-inito calculations in combination with machine learning models for materials design. The primary focus is on bulk materials, i.e., materials with fixed, ordered, crystal structures, although the methods naturally extend into more complicated configurations. Efficient and robust computational methods, computational power, and r…
▽ More
This paper reviews past and ongoing efforts in using high-throughput ab-inito calculations in combination with machine learning models for materials design. The primary focus is on bulk materials, i.e., materials with fixed, ordered, crystal structures, although the methods naturally extend into more complicated configurations. Efficient and robust computational methods, computational power, and reliable methods for automated database-driven high-throughput computation are combined to produce high-quality data sets. This data can be used to train machine learning models for predicting the stability of bulk materials and their properties. The underlying computational methods and the tools for automated calculations are discussed in some detail. Various machine learning models and, in particular, descriptors for general use in materials design are also covered.
△ Less
Submitted 5 October, 2019;
originally announced October 2019.
-
Semi-Local Parameterization of the Electron Localization Function in Second-Order Density Gradients
Authors:
Alexander Lindmaa,
Joel Davidsson,
Ann E. Mattsson,
Rickard Armiento
Abstract:
The electron localization function (ELF) is a universal measure of electron localization that allows for, e.g., an effective characterization of physical bonds in molecular and solid state systems. In the context of the widely used Kohn-Sham density-functional theory (KS-DFT) and its generalizations, ELF is given in terms of the single-particle electron density as well as the non-interacting kinet…
▽ More
The electron localization function (ELF) is a universal measure of electron localization that allows for, e.g., an effective characterization of physical bonds in molecular and solid state systems. In the context of the widely used Kohn-Sham density-functional theory (KS-DFT) and its generalizations, ELF is given in terms of the single-particle electron density as well as the non-interacting kinetic energy density (KED) of the KS system. Starting from the notion of an edge electron gas put forth by Kohn and Mattsson, we here use an \emph{exactly soluble}, strongly correlated few-electron model of a harmonically confined electron gas in order to parameterize the positive-definite non-interacting KS KED in terms of the density and its reduced second-order gradients. We arrive at a simple, yet generally applicable functional approximation to ELF expressed in the electron density and its derivatives. To demonstrate the validity of our approach, we use the obtained parameterization to perform topological analysis of the bonds in solid Al and Si, and to study physical and chemical adsorption of graphene on a Ni surface. We find that while the expression does not provide a quantitatively accurate approximation of absolute ELF values, the most essential qualitative features are captured. Hence, the expression is useful in contexts where the electron density is available, but not the KS orbitals or the KED, and one desires a qualitative picture of the electron localization that mimics ELF.
△ Less
Submitted 19 August, 2019;
originally announced August 2019.
-
On the challenge to improve the density response with unusual gradient approximations
Authors:
J. Garhammer,
F. Hofmann,
R. Armiento,
S. Kümmel
Abstract:
Certain excitations, especially ones of long-range charge transfer character, are poorly described by time-dependent density functional theory (TDDFT) when typical (semi-)local functionals are used. A proper description of these excitations would require an exchange-correlation response differing substantially from the usual (semi-)local one. It has recently been shown that functionals of the gene…
▽ More
Certain excitations, especially ones of long-range charge transfer character, are poorly described by time-dependent density functional theory (TDDFT) when typical (semi-)local functionals are used. A proper description of these excitations would require an exchange-correlation response differing substantially from the usual (semi-)local one. It has recently been shown that functionals of the generalized gradient approximation (GGA) type can yield unusual potentials, mimicking features of the exact exchange derivative discontinuity and showing divergences on orbital nodal surfaces. We here investigate whether these unusual potential properties translate into beneficial response properties. Using the Sternheimer formalism we closely investigate the response obtained with the 2013 exchange approximation by Armiento and Kümmel (AK13) and the 1988 exchange approximation by Becke (B88), both of which show divergences on orbital nodal planes. Numerical calculations for Na2 as well as analytical and numerical calculations for the hydrogen atom show that the response of AK13 behaves qualitatively different from usual semi local functionals. However, the AK13 functional leads to fundamental instabilities in the asymptotic region that prevent its practical application in TDDFT. Our findings may help the development of future improved functionals, and corroborate that the frequency-dependent Sternheimer formalism is excellently suited for running and analyzing TDDFT calculations.
△ Less
Submitted 7 June, 2018;
originally announced June 2018.
-
First principles predictions of magneto-optical data for semiconductor defects: the case of divacancy defects in 4H-SiC
Authors:
Joel Davidsson,
Viktor Ivády,
Rickard Armiento,
N. T. Son,
Adam Gali,
Igor Abrikosov
Abstract:
Study and design of magneto-optically active single point defects in semiconductors are rapidly growing fields due to their potential in quantum bit and single photon emitter applications. Detailed understanding of the properties of candidate defects is essential for these applications, and requires the identification of the defects microscopic configuration and electronic structure. Multi-compone…
▽ More
Study and design of magneto-optically active single point defects in semiconductors are rapidly growing fields due to their potential in quantum bit and single photon emitter applications. Detailed understanding of the properties of candidate defects is essential for these applications, and requires the identification of the defects microscopic configuration and electronic structure. Multi-component semiconductors often host two or more non-equivalent configurations of point defects. These configurations generally exhibit similar electronic structure and basic functionalities, however, they differ in details that are of great importance whenever single defect applications are considered. Identification of non-equivalent configurations of point defects is thus essential for successful single defect manipulation and application. A promising way to identify defects is via comparison of experimental measurements and results of first-principle calculations. We investigate a possibility to produce accurate ab initio data for zero-phonon lines and hyperfine coupling parameters that are required for systematic quantum bit search. We focus on properties relevant for the possible use of the divacancy defect in quantum bits in 4H-SiC. We provide a decisive identification of divacancy configurations in 4H-SiC and clarify differences in prior predictions of 4H-SiC divacancy zero-phonon photoluminescence lines.
△ Less
Submitted 15 August, 2017;
originally announced August 2017.
-
Energetics of the AK13 Semi-Local Kohn-Sham Exchange Energy Functional
Authors:
A. Lindmaa,
R. Armiento
Abstract:
The recent non-empirical semi-local exchange functional of Armiento and Kümmel, the AK13 [PRL 111, 036402 (2013)] incorporates a number of features reproduced by higher-order theory. The AK13 potential behaves analogously with the discontinuous jump associated with the derivative discontinuity at integer particle numbers. Recent works have established that AK13 gives a qualitatively improved orbit…
▽ More
The recent non-empirical semi-local exchange functional of Armiento and Kümmel, the AK13 [PRL 111, 036402 (2013)] incorporates a number of features reproduced by higher-order theory. The AK13 potential behaves analogously with the discontinuous jump associated with the derivative discontinuity at integer particle numbers. Recent works have established that AK13 gives a qualitatively improved orbital description compared to other semi-local methods, and reproduces a band structure closer to higher-order theory. However, its energies and energetics are inaccurate. The present work further investigates the deficiency in energetics. In addition to AK13 results, we find that applying the local-density approximation (LDA) non-self-consistently on the converged AK13 density gives very reasonable energetics with equilibrium lattice constants and bulk moduli well described across 14 systems. We also confirm that the attractive orbital features of AK13 are retained even after full structural relaxation. Hence, the deficient energetics cannot be a result of the AK13 orbitals having adversely affected the quality of the electron density compared to that of usual semi-local functionals; an improved orbital description and good energetics are not in opposition. We also prove that the non-self-consistent scheme is equivalent to using a single external-potential dependent functional in an otherwise consistent KS-DFT scheme. Furthermore, our results also demonstrate that, while an internally consistent KS functional is presently missing, non-self-consistent LDA on AK13 orbitals works as a practical non-empirical computational scheme to predict geometries, bulk moduli, while retaining the band structure features of AK13 at the computational cost of semi-local DFT.
△ Less
Submitted 7 April, 2016;
originally announced April 2016.
-
Structural and electronic properties of Li intercalated graphene on SiC(0001)
Authors:
Nuala M. Caffrey,
Leif I. Johansson,
Chao Xia,
Rickard Armiento,
Igor A. Abrikosov,
Chariya Jacobi
Abstract:
We investigate the structural and electronic properties of Li-intercalated monolayer graphene on SiC(0001) using combined angle-resolved photoemission spectroscopy and first-principles density functional theory. Li intercalates at room temperature both at the interface between the buffer layer and SiC and between the two carbon layers. The graphene is strongly $n$-doped due to charge transfer from…
▽ More
We investigate the structural and electronic properties of Li-intercalated monolayer graphene on SiC(0001) using combined angle-resolved photoemission spectroscopy and first-principles density functional theory. Li intercalates at room temperature both at the interface between the buffer layer and SiC and between the two carbon layers. The graphene is strongly $n$-doped due to charge transfer from the Li atoms and two $π$-bands are visible at the $\bar{K}$-point. After heating the sample to 300$^\circ$C, these $π$-bands become sharp and have a distinctly different dispersion to that of Bernal-stacked bilayer graphene. We suggest that the Li atoms intercalate between the two carbon layers with an ordered structure, similar to that of bulk LiC$_6$. An AA-stacking of these two layers becomes energetically favourable. The $π$-bands around the $\bar{K}$-point closely resemble the calculated band structure of a C$_6$LiC$_6$ system, where the intercalated Li atoms impose a super-potential on the graphene electronic structure that opens pseudo-gaps at the Dirac points of the two $π$-cones.
△ Less
Submitted 26 February, 2016;
originally announced February 2016.
-
Machine Learning Energies of 2 M Elpasolite (ABC$_2$D$_6$) Crystals
Authors:
Felix Faber,
Alexander Lindmaa,
O. Anatole von Lilienfeld,
Rickard Armiento
Abstract:
Elpasolite is the predominant quaternary crystal structure (AlNaK$_2$F$_6$ prototype) reported in the Inorganic Crystal Structure Database. We have developed a machine learning model to calculate density functional theory quality formation energies of all $\sim$2 M pristine ABC$_2$D$_6$ elpasolite crystals which can be made up from main-group elements (up to bismuth). Our model's accuracy can be i…
▽ More
Elpasolite is the predominant quaternary crystal structure (AlNaK$_2$F$_6$ prototype) reported in the Inorganic Crystal Structure Database. We have developed a machine learning model to calculate density functional theory quality formation energies of all $\sim$2 M pristine ABC$_2$D$_6$ elpasolite crystals which can be made up from main-group elements (up to bismuth). Our model's accuracy can be improved systematically, reaching 0.1 eV/atom for a training set consisting of 10 k crystals. Important bonding trends are revealed, fluoride is best suited to fit the coordination of the D site which lowers the formation energy whereas the opposite is found for carbon. The bonding contribution of elements A and B is very small on average. Low formation energies result from A and B being late elements from group (II), C being a late (I) element, and D being fluoride. Out of 2 M crystals, 90 unique structures are predicted to be on the convex hull---among which NFAl$_2$Ca$_6$, with peculiar stoichiometry and a negative atomic oxidation state for Al.
△ Less
Submitted 27 July, 2016; v1 submitted 21 August, 2015;
originally announced August 2015.
-
Theoretical unification of hybrid-DFT and DFT+U methods for the treatment of localized orbitals
Authors:
Viktor Ivády,
Rickard Armiento,
Krisztián Szász,
Erik Janzén,
Adam Gali,
Igor A. Abrikosov
Abstract:
We formulate the on-site occupation dependent exchange correlation energy and effective potential of hybrid functionals for localized states and connect them to the on-site correction term of the DFT+U method. Our derivation provides a theoretical justification for adding a DFT+U-like onsite potential in hybrid DFT calculations to resolve issues caused by overscreening of localized states. The res…
▽ More
We formulate the on-site occupation dependent exchange correlation energy and effective potential of hybrid functionals for localized states and connect them to the on-site correction term of the DFT+U method. Our derivation provides a theoretical justification for adding a DFT+U-like onsite potential in hybrid DFT calculations to resolve issues caused by overscreening of localized states. The resulting scheme, hybrid- DFT+Vw, is tested for chromium impurity in wurtzite AlN and vanadium impurity in 4H-SiC, which are paradigm examples of systems with different degree of localization between host and impurity orbitals.
△ Less
Submitted 11 June, 2014;
originally announced June 2014.
-
Quantum oscillations in the kinetic energy density: Gradient corrections from the Airy gas
Authors:
A. Lindmaa,
A. E. Mattsson,
R. Armiento
Abstract:
We derive a closed form expression for the quantum corrections to the kinetic energy density (KED) in the Thomas-Fermi (TF) limit of a linear potential model system in three dimensions (the Airy gas). The universality of the expression is tested numerically in a number of three dimensional model systems: (i) jellium surfaces, (ii) hydrogen-like potentials, (iii) systems confined by an harmonic pot…
▽ More
We derive a closed form expression for the quantum corrections to the kinetic energy density (KED) in the Thomas-Fermi (TF) limit of a linear potential model system in three dimensions (the Airy gas). The universality of the expression is tested numerically in a number of three dimensional model systems: (i) jellium surfaces, (ii) hydrogen-like potentials, (iii) systems confined by an harmonic potential in one and (iv) all three dimensions, and (v) a system with a cosine potential (the Mathieu gas). Our results confirm that the usual gradient expansion of extended Thomas-Fermi theory (ETF) does not describe the quantum oscillations for systems that incorporate surface regions where the electron density drops off to zero. We find that the correction derived from the Airy gas is universally applicable to relevant spatial regions of systems of type (i), (ii), and (iv), but somewhat surprisingly not (iii). We discuss possible implications of our findings to the development of functionals for the kinetic energy density.
△ Less
Submitted 6 March, 2014;
originally announced March 2014.
-
High-Throughput Screening of Perovskite Alloys for Piezoelectric Performance and Formability
Authors:
Rickard Armiento,
Boris Kozinsky,
Geoffroy Hautier,
Marco Fornari,
Gerbrand Ceder
Abstract:
We screen a large chemical space of perovskite alloys for systems with the right properties to accommodate a morphotropic phase boundary (MPB) in their composition-temperature phase diagram, a crucial feature for high piezoelectric performance. We start from alloy end-points previously identified in a high-throughput computational search. An interpolation scheme is used to estimate the relative en…
▽ More
We screen a large chemical space of perovskite alloys for systems with the right properties to accommodate a morphotropic phase boundary (MPB) in their composition-temperature phase diagram, a crucial feature for high piezoelectric performance. We start from alloy end-points previously identified in a high-throughput computational search. An interpolation scheme is used to estimate the relative energies between different perovskite distortions for alloy compositions with a minimum of computational effort. Suggested alloys are further screened for thermodynamic stability. The screening identifies alloy systems already known to host a MPB, and suggests a few new ones that may be promising candidates for future experiments. Our method of investigation may be extended to other perovskite systems, e.g., (oxy-)nitrides, and provides a useful methodology for any application of high-throughput screening of isovalent alloy systems.
△ Less
Submitted 6 September, 2013;
originally announced September 2013.