-
Mechanism of ferromagnetism enhancement in a La$_{2/3}$ Sr$_{1/3}$ MnO$_3$ membrane released from epitaxial strain
Authors:
Takahito Takeda,
Takuma Arai,
Kohei Yamagami,
Le Duc Anh,
Masaaki Tanaka,
Masaki Kobayashi,
Shinobu Ohya
Abstract:
Recent studies have shown that the magnetic properties of the ferromagnetic perovskite oxide La$_{2/3}$ Sr$_{1/3}$ MnO$_3$ (LSMO) grown on an SrTiO3 (STO) substrate, such as its magnetic moment and Curie temperature, can be improved by releasing the film from the substrate. However, the microscopic origin of this enhancement is not yet well understood. In this study, we use synchrotron radiation m…
▽ More
Recent studies have shown that the magnetic properties of the ferromagnetic perovskite oxide La$_{2/3}$ Sr$_{1/3}$ MnO$_3$ (LSMO) grown on an SrTiO3 (STO) substrate, such as its magnetic moment and Curie temperature, can be improved by releasing the film from the substrate. However, the microscopic origin of this enhancement is not yet well understood. In this study, we use synchrotron radiation measurements to investigate the mechanism of ferromagnetism enhancement in an LSMO membrane released from an STO substrate by dissolving a water-soluble Sr$_4$Al$_2$O$_7$ buffer layer. Using resonant photoemission spectroscopy on the as-grown LSMO film and LSMO membrane, we elucidate that the strain release from the STO substrate enhances the itineracy of the Mn-3d electrons via p-d hybridization, and this strengthens the double-exchange interaction. The reinforcement of the double-exchange interaction, in turn, improves the ferromagnetism of LSMO.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Peculiar atomic bond nature in platinum monatomic chains
Authors:
Jiaqi Zhang,
Keisuke Ishizuka,
Masahiko Tomitori,
Toyoko Arai,
Kenta Hongo,
Ryo Maezono,
Erio Tosatti,
Yoshifumi Oshima
Abstract:
Metal atomic chains have been reported to change their electronic or magnetic properties by slight mechanical stimulus. However, the mechanical response has been veiled because of lack of information on the bond nature. Here, we clarify the bond nature in platinum (Pt) monatomic chains by our developed in-situ transmission electron microscope method. The stiffness is measured with sub N/m precisio…
▽ More
Metal atomic chains have been reported to change their electronic or magnetic properties by slight mechanical stimulus. However, the mechanical response has been veiled because of lack of information on the bond nature. Here, we clarify the bond nature in platinum (Pt) monatomic chains by our developed in-situ transmission electron microscope method. The stiffness is measured with sub N/m precision by quartz length-extension resonator. The bond stiffnesses at the middle of the chain and at the connecting to the base are estimated to be 25 and 23 N/m, respectively, which are higher than the bulk counterpart. Interestingly, the bond length of 0.25 nm is found to be elastically stretched to 0.31 nm, corresponding to 24% in strain. Such peculiar bond nature could be explained by a novel concept of "string tension". This study is a milestone that will significantly change the way we think about atomic bonds in one-dimensional substance.
△ Less
Submitted 30 April, 2021;
originally announced April 2021.
-
Is water ice an efficient facilitator for dust coagulation?
Authors:
Hiroshi Kimura,
Koji Wada,
Hiroshi Kobayashi,
Hiroki Senshu,
Takayuki Hirai,
Fumi Yoshida,
Masanori Kobayashi,
Peng K. Hong,
Tomoko Arai,
Ko Ishibashi,
Manabu Yamada
Abstract:
Beyond the snow line of protoplanetary discs and inside the dense core of molecular clouds, the temperature of gas is low enough for water vapour to condense into amorphous ices on the surface of preexisting refractory dust particles. Recent numerical simulations and laboratory experiments suggest that condensation of the vapour promotes dust coagulation in such a cold region. However, in the nume…
▽ More
Beyond the snow line of protoplanetary discs and inside the dense core of molecular clouds, the temperature of gas is low enough for water vapour to condense into amorphous ices on the surface of preexisting refractory dust particles. Recent numerical simulations and laboratory experiments suggest that condensation of the vapour promotes dust coagulation in such a cold region. However, in the numerical simulations, cohesion of refractory materials is often underestimated, while in the laboratory experiments, water vapour collides with surfaces at more frequent intervals compared to the real conditions. Therefore, to re-examine the role of water ice in dust coagulation, we carry out systematic investigation of available data on coagulation of water ice particles by making full use of appropriate theories in contact mechanics and tribology. We find that the majority of experimental data are reasonably well explained by lubrication theories, owing to the presence of a quasi-liquid layer (QLL). Only exceptions are the results of dynamic collisions between particles at low temperatures, which are, instead, consistent with the JKR theory, because QLLs are too thin to dissipate their kinetic energies. By considering the vacuum conditions in protoplanetary discs and molecular clouds, the formation of amorphous water ice on the surface of refractory particles does not necessarily aid their collisional growth as currently expected. While crystallisation of water ice around but outside the snow line eases coagulation of ice-coated particles, sublimation of water ice inside the snow line is deemed to facilitate coagulation of bare refractory particles.
△ Less
Submitted 14 October, 2020; v1 submitted 13 August, 2020;
originally announced August 2020.
-
Pseudogap Behavior of the Nuclear Spin-lattice Relaxation Rate in FeSe Probed by $^{77}$Se-NMR
Authors:
Anlu Shi,
Takeshi Arai,
Shunsaku Kitagawa,
Takayoshi Yamanaka,
Kenji Ishida,
Anna E. Böhmer,
Christoph Meingast,
Thomas Wolf,
Michihiro Hirata,
Takahiko Sasaki
Abstract:
We conducted $^{77}$Se-nuclear magnetic resonance studies of the iron-based superconductor FeSe in magnetic fields of 0.6 to 19 T to investigate the superconducting and normal-state properties. The nuclear spin-lattice relaxation rate divided by the temperature $(T_1T)^{-1}$ increases below the structural transition temperature $T_\mathrm{s}$ but starts to be suppressed below $T^*$, well above the…
▽ More
We conducted $^{77}$Se-nuclear magnetic resonance studies of the iron-based superconductor FeSe in magnetic fields of 0.6 to 19 T to investigate the superconducting and normal-state properties. The nuclear spin-lattice relaxation rate divided by the temperature $(T_1T)^{-1}$ increases below the structural transition temperature $T_\mathrm{s}$ but starts to be suppressed below $T^*$, well above the superconducting transition temperature $T_\mathrm{c}(H)$, resulting in a broad maximum of $(T_1T)^{-1}$ at $T_\mathrm{p}(H)$. This is similar to the pseudogap behavior in optimally doped cuprate superconductors. Because $T^*$ and $T_\mathrm{p}(H)$ decrease in the same manner as $T_\mathrm{c}(H)$ with increasing $H$, the pseudogap behavior in FeSe is ascribed to superconducting fluctuations, which presumably originate from the theoretically predicted preformed pair above $T_\mathrm{c}(H)$.
△ Less
Submitted 12 December, 2017;
originally announced December 2017.
-
Amplitude dependence of image quality in atomically-resolved bimodal atomic microscopy
Authors:
Hiroaki Ooe,
Dominik Kirpal,
Daniel S. Wastl,
Alfred J. Weymouth,
Toyoko Arai,
Franz J. Giessibl
Abstract:
In bimodal FM-AFM, two flexural modes are excited simultaneously. The total vertical oscillation deflection range of the tip is the sum of the peak-to-peak amplitudes of both flexural modes (sum amplitude). We show atomically resolved images of KBr(100) in ambient conditions in bimodal AFM that display a strong correlation between image quality and sum amplitude. When the sum amplitude becomes lar…
▽ More
In bimodal FM-AFM, two flexural modes are excited simultaneously. The total vertical oscillation deflection range of the tip is the sum of the peak-to-peak amplitudes of both flexural modes (sum amplitude). We show atomically resolved images of KBr(100) in ambient conditions in bimodal AFM that display a strong correlation between image quality and sum amplitude. When the sum amplitude becomes larger than about 200 pm, the signal-to-noise ratio (SNR) is drastically decreased. We propose this is caused by the temporary presence of one or more water layers in the tip-sample gap. These water layers screen the short range interaction and must be displaced with each oscillation cycle. Further decreasing the sum amplitude, however, causes a decrease in SNR. Therefore, the highest SNR in ambient conditions is achieved when the sum amplitude is slightly less than the thickness of the primary hydration layer.
△ Less
Submitted 21 May, 2016;
originally announced May 2016.
-
Path integral representation for stochastic jump processes with boundaries
Authors:
Takashi Arai
Abstract:
We propose a formalism to analyze discrete stochastic processes with finite-state-level N. By using an (N+1)-dimensional representation of su(2) Lie algebra, we re-express the master equation to a time-evolution equation for the state vector corresponding to the probability generating function. We found that the generating function of the system can be expressed as a propagator in the spin coheren…
▽ More
We propose a formalism to analyze discrete stochastic processes with finite-state-level N. By using an (N+1)-dimensional representation of su(2) Lie algebra, we re-express the master equation to a time-evolution equation for the state vector corresponding to the probability generating function. We found that the generating function of the system can be expressed as a propagator in the spin coherent state representation. The generating function has a path integral representation in terms of the spin coherent state. We apply our formalism to a linear Susceptible-Infected-Susceptible (SIS) epidemic model with time-dependent transition probabilities. The probability generating function of the system is calculated concisely using an algebraic property of the system or a path integral representation. Our results indicate that the method of analysis developed in the field of quantum mechanics is applicable to discrete stochastic processes with finite-state-level.
△ Less
Submitted 24 October, 2015;
originally announced October 2015.
-
Influence of atomic tip structure on the intensity of inelastic tunneling spectroscopy data analyzed by combined scanning tunneling spectroscopy, force microscopy and density functional theory
Authors:
Norio Okabayashi,
Alexander Gustafsson,
Angelo Peronio,
Magnus Paulsson,
Toyoko Arai,
Franz J. Giessibl
Abstract:
Achieving a high intensity in inelastic scanning tunneling spectroscopy (IETS) is important for precise measurements. The intensity of the IETS signal can vary up to a factor three for various tips without an apparent reason accessible by scanning tunneling microscopy (STM) alone. Here, we show that combining STM and IETS with atomic force microscopy enables carbon monoxide front atom identificati…
▽ More
Achieving a high intensity in inelastic scanning tunneling spectroscopy (IETS) is important for precise measurements. The intensity of the IETS signal can vary up to a factor three for various tips without an apparent reason accessible by scanning tunneling microscopy (STM) alone. Here, we show that combining STM and IETS with atomic force microscopy enables carbon monoxide front atom identification, revealing that high IETS intensities for CO/Cu(111) are obtained for single atom tips, while the intensity drops sharply for multi-atom tips. Adsorbing the CO molecule on a Cu adatom [CO/Cu/Cu(111)] such that it is elevated over the substrate strongly diminishes the tip dependence of IETS intensity, showing that an elevated position channels most of the tunneling current through the CO molecule even for multi-atom tips, while a large fraction of the tunneling current bypasses the CO molecule in the case of CO/Cu(111).
△ Less
Submitted 8 March, 2016; v1 submitted 19 April, 2015;
originally announced April 2015.
-
Origin of the tetragonal-to-orthorhombic (nematic) phase transition in FeSe: a combined thermodynamic and NMR study
Authors:
A. E. Böhmer,
T. Arai,
F. Hardy,
T. Hattori,
T. Iye,
T. Wolf,
H. v. Löhneysen,
K. Ishida,
C. Meingast
Abstract:
The nature of the tetragonal-to-orthorhombic structural transition at $T_s\approx90$ K in single crystalline FeSe is studied using shear-modulus, heat-capacity, magnetization and NMR measurements. The transition is shown to be accompanied by a large shear-modulus softening, which is practically identical to that of underdoped Ba(Fe,Co)$_2$As$_2$, suggesting very similar strength of the electron-la…
▽ More
The nature of the tetragonal-to-orthorhombic structural transition at $T_s\approx90$ K in single crystalline FeSe is studied using shear-modulus, heat-capacity, magnetization and NMR measurements. The transition is shown to be accompanied by a large shear-modulus softening, which is practically identical to that of underdoped Ba(Fe,Co)$_2$As$_2$, suggesting very similar strength of the electron-lattice coupling. On the other hand, a spin-fluctuation contribution to the spin-lattice relaxation rate is only observed below $T_s$. This indicates that the structural, or "nematic", phase transition in FeSe is not driven by magnetic fluctuations.
△ Less
Submitted 21 July, 2014;
originally announced July 2014.
