-
Vortex motion in reconfigurable three-dimensional superconducting nanoarchitectures
Authors:
Elina Zhakina,
Luke Turnbull,
Weijie Xu,
Markus König,
Paul Simon,
Wilder Carrillo-Cabrera,
Amalio Fernandez-Pacheco,
Uri Vool,
Dieter Suess,
Claas Abert,
Vladimir M. Fomin,
Claire Donnelly
Abstract:
When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in techn…
▽ More
When materials are patterned in three dimensions, there exist opportunities to tailor and create functionalities associated with an increase in complexity, the breaking of symmetries, and the introduction of curvature and non-trivial topologies. For superconducting nanostructures, the extension to the third dimension may trigger the emergence of new physical phenomena, as well as advances in technologies. Here, we harness three-dimensional (3D) nanopatterning to fabricate and control the emergent properties of a 3D superconducting nanostructure. Not only are we able to demonstrate the existence and motion of superconducting vortices in 3D but, with simulations, we show that the confinement leads to a well-defined bending of the vortices within the volume of the structure. Moreover, we experimentally observe a strong geometrical anisotropy of the critical field, through which we achieve the reconfigurable coexistence of superconducting and normal states in our 3D superconducting architecture, and the local definition of weak links. In this way, we uncover an intermediate regime of nanosuperconductivity, where the vortex state is truly three-dimensional and can be designed and manipulated by geometrical confinement. This insight into the influence of 3D geometries on superconducting properties offers a route to local reconfigurable control for future computing devices, sensors, and quantum technologies.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Tailoring the energy landscape of a Bloch point singularity with curvature
Authors:
Sandra Ruiz-Gomez,
Claas Abert,
Pamela Morales-Fernández,
Claudia Fernandez-Gonzalez,
Sabri Koraltan,
Lukas Danesi,
Dieter Suess,
Michael Foerster,
Miguel Ángel Nino,
Anna Mandziak,
Dorota Wilgocka-Ślęzak,
Pawel Nita,
Markus Koenig,
Sebastian Seifert,
Aurelio Hierro Rodríguez,
Amalio Fernández-Pacheco,
Claire Donnelly
Abstract:
Topological defects, or singularities, play a key role in the statics and dynamics of complex systems. In magnetism, Bloch point singularities represent point defects that mediate the nucleation of textures such as skyrmions and hopfions. However, while the textures are typically stabilised in chiral magnets, the influence of chirality on the Bloch point singularities remains relatively unexplored…
▽ More
Topological defects, or singularities, play a key role in the statics and dynamics of complex systems. In magnetism, Bloch point singularities represent point defects that mediate the nucleation of textures such as skyrmions and hopfions. However, while the textures are typically stabilised in chiral magnets, the influence of chirality on the Bloch point singularities remains relatively unexplored. Here we harness advanced three-dimensional nanofabrication to explore the influence of chirality on Bloch point singularities by introducing curvature-induced symmetry breaking in a ferromagnetic nanowire. Combining X-ray magnetic microscopy with the application of in situ magnetic fields, we demonstrate that Bloch point singularity-containing domain walls are stabilised in straight regions of the sample, and determine that curvature can be used to tune the energy landscape of the Bloch points. Not only are we able to pattern pinning points but, by controlling the gradient of curvature, we define asymmetric potential wells to realise a robust Bloch point shift-register with non-reciprocal behaviour. These insights into the influence of symmetry and chirality on singularities offers a route to the controlled nucleation and propagation of topological textures, providing opportunities for logic and computing devices.
△ Less
Submitted 9 April, 2024;
originally announced April 2024.
-
Field-free switching of perpendicular magnetic elements by using two orthogonal sub nanosecond spin orbit torque pulses
Authors:
Dieter Suess,
Claas Abert,
Sebastian Zeilinger,
Florian Bruckner,
Sabri Koraltan
Abstract:
We propose a field-free switching mechanism that utilizes two spatially orthogonal spin-orbit torque (SOT) currents. Initially applied simultaneously, one of the currents is subsequently switched off. The superposition of these two currents results in an in-plane magnetization, which is not orthogonal to the remaining SOT current after the second one is deactivated. This symmetry-breaking procedur…
▽ More
We propose a field-free switching mechanism that utilizes two spatially orthogonal spin-orbit torque (SOT) currents. Initially applied simultaneously, one of the currents is subsequently switched off. The superposition of these two currents results in an in-plane magnetization, which is not orthogonal to the remaining SOT current after the second one is deactivated. This symmetry-breaking procedure leads to reproducible and rapid switching, with field pulse durations as short as 0.25 nanoseconds.
△ Less
Submitted 29 March, 2024;
originally announced March 2024.
-
Experimental realisation of a universal inverse-design magnonic device
Authors:
Noura Zenbaa,
Claas Abert,
Fabian Majcen,
Michael Kerber,
Rostyslav O. Serha,
Sebastian Knauer,
Qi Wang,
Thomas Schrefl,
Dieter Suess,
Andrii V. Chumak
Abstract:
In the field of magnonics, which uses magnons, the quanta of spin waves, for energy-efficient data processing, significant progress has been made leveraging the capabilities of the inverse design concept. This approach involves defining a desired functionality and employing a feedback-loop algorithm to optimise the device design. In this study, we present the first experimental demonstration of a…
▽ More
In the field of magnonics, which uses magnons, the quanta of spin waves, for energy-efficient data processing, significant progress has been made leveraging the capabilities of the inverse design concept. This approach involves defining a desired functionality and employing a feedback-loop algorithm to optimise the device design. In this study, we present the first experimental demonstration of a reconfigurable, lithography-free, and simulation-free inverse-design device capable of implementing various RF components. The device features a square array of independent direct current loops that generate a complex reconfigurable magnetic medium atop a Yttrium-Iron-Garnet (YIG) rectangular film for data processing in the gigahertz range. Showcasing its versatility, the device addresses inverse problems using two algorithms to create RF notch filters and demultiplexers. Additionally, the device holds promise for binary, reservoir, and neuromorphic computing applications.
△ Less
Submitted 3 July, 2024; v1 submitted 26 March, 2024;
originally announced March 2024.
-
Skyrmionic device for three dimensional magnetic field sensing enabled by spin-orbit torques
Authors:
Sabri Koraltan,
Rahul Gupta,
Reshma Peremadathil Pradeep,
Fabian Kammerbauer,
Iryna Kononenko,
Klemens Prügl,
Michael Kirsch,
Bernd Aichner,
Santiago Helbig,
Florian Bruckner,
Claas Abert,
Andrada Oana Mandru,
Armin Satz,
Gerhard Jakob,
Hans Josef Hug,
Mathias Kläui,
Dieter Suess
Abstract:
Magnetic skyrmions are topologically protected local magnetic solitons that are promising for storage, logic or general computing applications. In this work, we demonstrate that we can use a skyrmion device based on [W/CoFeB/MgO] 1 0 multilayers for three-dimensional magnetic field sensing enabled by spin-orbit torques (SOT). We stabilize isolated chiral skyrmions and stripe domains in the multila…
▽ More
Magnetic skyrmions are topologically protected local magnetic solitons that are promising for storage, logic or general computing applications. In this work, we demonstrate that we can use a skyrmion device based on [W/CoFeB/MgO] 1 0 multilayers for three-dimensional magnetic field sensing enabled by spin-orbit torques (SOT). We stabilize isolated chiral skyrmions and stripe domains in the multilayers, as shown by magnetic force microscopy images and micromagnetic simulations. We perform magnetic transport measurements to show that we can sense both in-plane and out-of-plane magnetic fields by means of a differential measurement scheme in which the symmetry of the SOT leads to cancelation of the DC offset. With the magnetic parameters obtained by vibrating sample magnetometry and ferromagnetic resonance measurements, we perform finite-temperature micromagnetic simulations, where we investigate the fundamental origin of the sensing signal. We identify the topological transformation between skyrmions, stripes and type-II bubbles that leads to a change in the resistance that is read-out by the anomalous Hall effect. Our study presents a novel application for skyrmions, where a differential measurement sensing concept is applied to quantify external magnetic fields paving the way towards more energy efficient applications in skyrmionics based spintronics.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Energy landscape of noncollinear exchange coupled magnetic multilayers
Authors:
George Lertzman-Lepofsky,
Afan Terko,
Sabri Koraltan,
Dieter Suess,
Erol Girt,
Claas Abert
Abstract:
We conduct an exploration of the energy landscape of two coupled ferromagnetic layers with perpendicular-to-plane uniaxial anisotropy using finite-element micromagnetic simulations. These multilayers can be used to produce noncollinearity in spin-transfer torque magnetic random-access memory cells, which has been shown to increase the performance of this class of computer memory. We show that ther…
▽ More
We conduct an exploration of the energy landscape of two coupled ferromagnetic layers with perpendicular-to-plane uniaxial anisotropy using finite-element micromagnetic simulations. These multilayers can be used to produce noncollinearity in spin-transfer torque magnetic random-access memory cells, which has been shown to increase the performance of this class of computer memory. We show that there exists a range of values of the interlayer exchange coupling constants for which the magnetic state of these multilayers can relax into two energy minima. The size of this region is determined by the difference in the magnitude of the layer anisotropies and is minimized when this difference is large. In this case, there is a wide range of experimentally achievable coupling constants that can produce desirable and stable noncollinear alignment. We investigate the energy barriers separating the local and global minima using string method simulations, showing that the stabilities of the minima increase with increasing difference in the anisotropy of the ferromagnetic layers. We provide an analytical solution to the location of the minima in the energy landscape of coupled macrospins, which has good agreement with our micromagnetic results for a case involving ferromagnetic layers with the same thickness and anisotropy, no demagnetization field, and large exchange stiffness. These results are important to understand how best to employ noncollinear coupling in the next generation of thin film magnetic devices.
△ Less
Submitted 11 May, 2024; v1 submitted 24 February, 2024;
originally announced February 2024.
-
Steerable current-driven emission of spin waves in magnetic vortex pairs
Authors:
Sabri Koraltan,
Katrin Schultheiss,
Florian Bruckner,
Markus Weigand,
Claas Abert,
Dieter Suess,
Sebastian Wintz
Abstract:
The efficient excitation of spin waves is a key challenge in the realization of magnonic devices. We demonstrate the current-driven generation of spin waves in antiferromagnetically coupled magnetic vortices. We employ time-resolved scanning transmission X-ray microscopy (TR-STXM) to directly image the emission of spin waves upon the application of an alternating current flowing directly through t…
▽ More
The efficient excitation of spin waves is a key challenge in the realization of magnonic devices. We demonstrate the current-driven generation of spin waves in antiferromagnetically coupled magnetic vortices. We employ time-resolved scanning transmission X-ray microscopy (TR-STXM) to directly image the emission of spin waves upon the application of an alternating current flowing directly through the magnetic stack. Micromagnetic simulations allow us to identify the origin of the excitation to be the current-driven Oersted field, which in the present system proves to be orders of magnitude more efficient than the commonly used excitation via stripline antennas. Our numerical studies also reveal that the spin-transfer torque can lead to the emission of spin waves as well, yet only at much higher current amplitudes. By using magnetostrictive materials, we futhermore demonstrate that the direction of the magnon propagation can be steered by increasing the excitation amplitude, which modifies the underlying magnetization profile through an additional anisotropy in the magnetic layers. The demonstrated methods allow for the efficient and tunable excitation of spin waves, marking a significant advance in the generation and control of spin waves in magnonic devices.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
Magnetic anisotropy and GGG substrate stray field in YIG films down to millikelvin temperatures
Authors:
Rostyslav O. Serha,
Andrey A. Voronov,
David Schmoll,
Roman Verba,
Khrystyna O. Levchenko,
Sabri Koraltan,
Kristýna Davídková,
Barbora Budinska,
Qi Wang,
Oleksandr V. Dobrovolskiy,
Michal Urbánek,
Morris Lindner,
Timmy Reimann,
Carsten Dubs,
Carlos Gonzalez-Ballestero,
Claas Abert,
Dieter Suess,
Dmytro A. Bozhko,
Sebastian Knauer,
Andrii V. Chumak
Abstract:
Quantum magnonics investigates the quantum-mechanical properties of magnons such as quantum coherence or entanglement for solid-state quantum information technologies at the nanoscale. The most promising material for quantum magnonics is the ferrimagnetic yttrium iron garnet (YIG), which hosts magnons with the longest lifetimes. YIG films of the highest quality are grown on a paramagnetic gadolini…
▽ More
Quantum magnonics investigates the quantum-mechanical properties of magnons such as quantum coherence or entanglement for solid-state quantum information technologies at the nanoscale. The most promising material for quantum magnonics is the ferrimagnetic yttrium iron garnet (YIG), which hosts magnons with the longest lifetimes. YIG films of the highest quality are grown on a paramagnetic gadolinium gallium garnet (GGG) substrate. The literature has reported that ferromagnetic resonance (FMR) frequencies of YIG/GGG decrease at temperatures below 50 K despite the increase in YIG magnetization. We investigated a 97 nm-thick YIG film grown on 500 $\mathrmμ$m-thick GGG substrate through a series of experiments conducted at temperatures as low as 30 mK, and using both analytical and numerical methods. Our findings suggest that the primary factor contributing to the FMR frequency shift is the stray magnetic field created by the partially magnetized GGG substrate. This stray field is antiparallel to the applied external field and is highly inhomogeneous, reaching up to 40 mT in the center of the sample. At temperatures below 500 mK, the GGG field exhibits a saturation that cannot be described by the standard Brillouin function for a paramagnet. Including the calculated GGG field in the analysis of the FMR frequency versus temperature dependence allowed the determination of the cubic and uniaxial anisotropies. We find that the total anisotropy increases more than three times with the decrease in temperature down to 2 K. Our findings enable accurate predictions of the YIG/GGG magnetic systems behavior at low and ultra-low millikelvin temperatures, crucial for develo** quantum magnonic devices.
△ Less
Submitted 19 February, 2024;
originally announced February 2024.
-
Laser-induced real-space topology control of spin wave resonances
Authors:
Tim Titze,
Sabri Koraltan,
Timo Schmidt,
Marcel Möller,
Florian Bruckner,
Claas Abert,
Dieter Suess,
Claus Ropers,
Daniel Steil,
Manfred Albrecht,
Stefan Mathias
Abstract:
Femtosecond laser excitation of materials that exhibit magnetic spin textures promises advanced magnetic control via the generation of ultrafast and non-equilibrium spin dynamics. We explore such possibilities in ferrimagnetic [Fe(0.35 nm)/Gd(0.40 nm)]$_{160}$ multilayers, which host a rich diversity of magnetic textures from stripe domains at low magnetic fields, a dense bubble/skyrmion lattice a…
▽ More
Femtosecond laser excitation of materials that exhibit magnetic spin textures promises advanced magnetic control via the generation of ultrafast and non-equilibrium spin dynamics. We explore such possibilities in ferrimagnetic [Fe(0.35 nm)/Gd(0.40 nm)]$_{160}$ multilayers, which host a rich diversity of magnetic textures from stripe domains at low magnetic fields, a dense bubble/skyrmion lattice at intermediate fields, and a single domain state for high magnetic fields. Using femtosecond magneto-optics, we observe distinct coherent spin wave dynamics in response to a weak laser excitation allowing us to unambiguously identify the different magnetic spin textures. Moreover, employing strong laser excitation we show that we achieve versatile control of the coherent spin dynamics via non-equilibrium and ultrafast transformation of magnetic spin textures by both creating and annihilating bubbles/skyrmions. We corroborate our findings by micromagnetic simulations and by Lorentz transmission electron microscopy before and after laser exposure.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Single device offset-free magnetic field sensing principle with tunable sensitivity and linear range based on spin-orbit-torques
Authors:
Sabri Koraltan,
Christin Schmitt,
Florian Bruckner,
Claas Abert,
Klemens Prügl,
Michael Kirsch,
Rahul Gupta,
Sebastian Zeilinger,
Joshua M. Salazar-Mejía,
Milan Agrawal,
Johannes Güttinger,
Armin Satz,
Gerhard Jakob,
Mathias Kläui,
Dieter Suess
Abstract:
We propose a novel device concept using spin-orbit-torques to realize a magnetic field sensor, where we eliminate the sensor offset using a differential measurement concept. We derive a simple analytical formulation for the sensor signal and demonstrate its validity with numerical investigations using macrospin simulations. The sensitivity and the measurable linear sensing range in the proposed co…
▽ More
We propose a novel device concept using spin-orbit-torques to realize a magnetic field sensor, where we eliminate the sensor offset using a differential measurement concept. We derive a simple analytical formulation for the sensor signal and demonstrate its validity with numerical investigations using macrospin simulations. The sensitivity and the measurable linear sensing range in the proposed concept can be tuned by either varying the effective magnetic anisotropy or by varying the magnitude of the injected currents. We show that undesired perturbation fields normal to the sensitive direction preserve the zero-offset property and only slightly modulate the sensitivity of the proposed sensor. Higher-harmonics voltage analysis on a Hall cross experimentally confirms the linearity and tunability via current strength. Additionally, the sensor exhibits a non-vanishing offset in the experiment which we attribute to the anomalous Nernst effect.
△ Less
Submitted 23 March, 2023;
originally announced March 2023.
-
Generation and annihilation of skyrmions and antiskyrmions in magnetic heterostructures
Authors:
Sabri Koraltan,
Claas Abert,
Florian Bruckner,
Michael Heigl,
Manfred Albrecht,
Dieter Suess
Abstract:
We demonstrate the controlled generation and annihilation of (anti)skyrmions with tunable chirality in magnetic heterostructures by means of micromagnetic simulations. By making use of magnetic (anti)vortices in patterned ferromagnetic layer, we stabilize full lattices of (anti)skyrmions in an underlying skyrmionic thin film in a reproducible manner. The stability of the (anti)skyrmion depends on…
▽ More
We demonstrate the controlled generation and annihilation of (anti)skyrmions with tunable chirality in magnetic heterostructures by means of micromagnetic simulations. By making use of magnetic (anti)vortices in patterned ferromagnetic layer, we stabilize full lattices of (anti)skyrmions in an underlying skyrmionic thin film in a reproducible manner. The stability of the (anti)skyrmion depends on the polarization of the (anti)vortex, whereas their chirality is given by those of the (anti)vortices. Furthermore, we demonstrate that the core coupling between the (anti)vortices and (anti)skyrmions allows to annihilate the spin-objects in a controlled fashion by applying short pulses of in-plane external magnetic fields, representing a new key paradigm in skyrmionic devices.
△ Less
Submitted 25 July, 2022;
originally announced July 2022.
-
Accurate finite-difference micromagnetics of magnets including RKKY interaction -- analytical solution and comparison to standard micromagnetic codes
Authors:
Dieter Suess,
Sabri Koraltan,
Florian Slanovc,
Florian Bruckner,
Claas Abert
Abstract:
Within this paper we show the importance of accurate implementations of the RKKY interactions for antiferromagnetically coupled ferromagnetic layers with thicknesses exceeding the exchange length. In order to evaluate the performance of different implementations of RKKY interaction, we develop a benchmark problem by deriving the analytical formula for the saturation field of two infinitely thick m…
▽ More
Within this paper we show the importance of accurate implementations of the RKKY interactions for antiferromagnetically coupled ferromagnetic layers with thicknesses exceeding the exchange length. In order to evaluate the performance of different implementations of RKKY interaction, we develop a benchmark problem by deriving the analytical formula for the saturation field of two infinitely thick magnetic layers that are antiparallelly coupled. This benchmark problem shows that state-of-the-art implementations in commonly used finite-difference codes lead to errors of the saturation field that amount to more than 20% for mesh sizes of 2 nm which is well below the exchange length of the material. In order to improve the accuracy, we develop higher order cell based and nodal based finite-difference codes that significantly reduce the error compared to state-of-the-art implementations. For the second order cell based and first order nodal based finite element approach the error of the saturation field is reduced by about a factor of 10 (2% error) for the same mesh size of 2 nm.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
On the origin of noncollinear magnetization coupling across RuX layers
Authors:
Claas Abert,
Sabri Koraltan,
Florian Bruckner,
Florian Slanovc,
Juliana Lisik,
Pavlo Omelchenko,
Erol Girt,
Dieter Suess
Abstract:
We present a simple atomistic model for the description of noncollinear coupling in magnetic multilayers with hybrid spacer layers made of Ru alloyed to ferromagnetic atoms such as Fe. In contrast to previous analytical and micromagnetic models that explain the noncollinear coupling by means of lateral fluctuations in the coupling constant, the presented model accounts for atom-atom coupling in al…
▽ More
We present a simple atomistic model for the description of noncollinear coupling in magnetic multilayers with hybrid spacer layers made of Ru alloyed to ferromagnetic atoms such as Fe. In contrast to previous analytical and micromagnetic models that explain the noncollinear coupling by means of lateral fluctuations in the coupling constant, the presented model accounts for atom-atom coupling in all three spatial dimensions within the spacer layer. The new model is able to accurately predict the dependence of the macroscopic bilinear and biquadratic coupling constants on the spacer-layer composition and thickness, showing much better quantitative agreement than lateral-fluctuation models. Moreover, it predicts noncollinear coupling even for infinitely stiff ferromagnetic layers which goes beyond the predictions of previous models.
△ Less
Submitted 21 January, 2022;
originally announced January 2022.
-
In-situ alignment of anisotropic hard magnets of 3D printed magnets
Authors:
Maximilian Suppan,
Christian Huber,
Klaus Mathauer,
Claas Abert,
Florian Brucker,
Joamin Gonzalez-Gutierrez,
Stephan Schuschnigg,
Martin Groenefeld,
Iulian Teliban,
Spomenka Kobe,
Boris Saje,
Dieter Suess
Abstract:
Within this work, we demonstrate in-situ easy-axis alignment of single-crystal magnetic particles inside a polymer matrix using fused filament fabrication. Two different magnetic materials are investigated: (i) Strontium hexaferrite inside a PA6 matrix, fill grade: 49 vol% and (ii) Samarium iron nitride inside a PA12 matrix, fill grade: 44 vol%. In the presence of the external alignment field, the…
▽ More
Within this work, we demonstrate in-situ easy-axis alignment of single-crystal magnetic particles inside a polymer matrix using fused filament fabrication. Two different magnetic materials are investigated: (i) Strontium hexaferrite inside a PA6 matrix, fill grade: 49 vol% and (ii) Samarium iron nitride inside a PA12 matrix, fill grade: 44 vol%. In the presence of the external alignment field, the strontium hexaferrite particles inside the PA6 matrix can be well aligned with a ratio of remanent magnetization to saturation magnetization of 0.7. No significant alignment for samarium iron nitride could be achieved. The results show the feasibility to fabricate magnets with arbitrary and locally defined easy axis using fused filament fabrication since the permanent magnets used for the alignment (or alternatively an electromagnet) can be mounted on a rotatable platform.
△ Less
Submitted 18 January, 2022;
originally announced January 2022.
-
Roadmap on Spin-Wave Computing
Authors:
A. V. Chumak,
P. Kabos,
M. Wu,
C. Abert,
C. Adelmann,
A. Adeyeye,
J. Åkerman,
F. G. Aliev,
A. Anane,
A. Awad,
C. H. Back,
A. Barman,
G. E. W. Bauer,
M. Becherer,
E. N. Beginin,
V. A. S. V. Bittencourt,
Y. M. Blanter,
P. Bortolotti,
I. Boventer,
D. A. Bozhko,
S. A. Bunyaev,
J. J. Carmiggelt,
R. R. Cheenikundil,
F. Ciubotaru,
S. Cotofana
, et al. (91 additional authors not shown)
Abstract:
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the…
▽ More
Magnonics is a field of science that addresses the physical properties of spin waves and utilizes them for data processing. Scalability down to atomic dimensions, operations in the GHz-to-THz frequency range, utilization of nonlinear and nonreciprocal phenomena, and compatibility with CMOS are just a few of many advantages offered by magnons. Although magnonics is still primarily positioned in the academic domain, the scientific and technological challenges of the field are being extensively investigated, and many proof-of-concept prototypes have already been realized in laboratories. This roadmap is a product of the collective work of many authors that covers versatile spin-wave computing approaches, conceptual building blocks, and underlying physical phenomena. In particular, the roadmap discusses the computation operations with Boolean digital data, unconventional approaches like neuromorphic computing, and the progress towards magnon-based quantum computing. The article is organized as a collection of sub-sections grouped into seven large thematic sections. Each sub-section is prepared by one or a group of authors and concludes with a brief description of the current challenges and the outlook of the further development of the research directions.
△ Less
Submitted 30 October, 2021;
originally announced November 2021.
-
Domain wall automotion in three-dimensional magnetic helical interconnectors
Authors:
L. Skoric,
C. Donnelly,
A. Hierro-Rodriguez,
S. Ruiz-Gómez,
M. Foerster,
M. A. Niño Orti,
R. Belkhou,
C. Abert,
D. Suess,
A. Fernández-Pacheco
Abstract:
The fundamental limits currently faced by traditional computing devices necessitate the exploration of new ways to store, compute and transmit information. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nano…
▽ More
The fundamental limits currently faced by traditional computing devices necessitate the exploration of new ways to store, compute and transmit information. Here, we propose a three-dimensional (3D) magnetic interconnector that exploits geometry-driven automotion of domain walls (DWs), for the transfer of magnetic information between functional magnetic planes. By combining state-of-the-art 3D nanoprinting and standard physical vapor deposition, we prototype 3D helical DW conduits. We observe the automotion of DWs by imaging their magnetic state under different field sequences using X-ray microscopy, observing a robust unidirectional motion of DWs from the bottom to the top of the spirals. From experiments and micromagnetic simulations, we determine that the large thickness gradients present in the structure are the main mechanism for 3D DW automotion. We obtain direct evidence of how this tailorable magnetic energy gradient is imprinted in the devices, and how it competes with pinning effects due to local changes in the energy landscape. Our work also predicts how this effect could lead to high DW velocities, reaching the Walker limit during automotion. This work provides new possibilities for efficient transfer of magnetic information in three dimensions.
△ Less
Submitted 9 October, 2021;
originally announced October 2021.
-
Micromagnetic modelling of magnetic domain walls in curved cylindrical nanotubes and nanowires
Authors:
L. Skoric,
C. Donnelly,
C. Abert,
A. Hierro-Rodriguez,
D. Suess,
A. Fernández-Pacheco
Abstract:
We investigate the effect of curvature on the energy and stability of domain wall configurations in curved cylindrical nanotubes and nanowires. We use micromagnetic simulations to calculate the phase diagram for the transverse wall (TW) and vortex wall (VW) states in tubes, finding the ground state configuration and the metastability region where both types of walls can exist. The introduction of…
▽ More
We investigate the effect of curvature on the energy and stability of domain wall configurations in curved cylindrical nanotubes and nanowires. We use micromagnetic simulations to calculate the phase diagram for the transverse wall (TW) and vortex wall (VW) states in tubes, finding the ground state configuration and the metastability region where both types of walls can exist. The introduction of curvature shifts the range for which the TW is the ground state domain wall to higher diameters, and increases the range of metastability. We interpret this behavior to be primarily due to the curvature-induced effective Dzyaloshinskii-Moriya term in the exchange energy. Furthermore, we demonstrate qualitatively the same behavior in solid cylindrical nanowires. Comparing both tubes and wires, we observe how while in tubes curvature tends to suppress the transformation from the TW to VW, in wires it promotes the transformation of the VW containing the Bloch point into the TW. These findings have important implications in the fundamental understanding of domain walls in 3D geometries, and the design of future domain wall devices.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Tension-free Dirac strings and steered magnetic charges in 3D artificial spin ice
Authors:
Sabri Koraltan,
Florian Slanovc,
Florian Bruckner,
Cristiano Nisoli,
Andrii V. Chumak,
Oleksandr V. Dobrovolskiy,
Claas Abert,
Dieter Suess
Abstract:
3D nano-architectures present a new paradigm in modern condensed matter physics with numerous applications in photonics, biomedicine, and spintronics. They are promising for the realisation of 3D magnetic nano-networks for ultra-fast and low-energy data storage. Frustration in these systems can lead to magnetic charges or magnetic monopoles, which can function as mobile, binary information carrier…
▽ More
3D nano-architectures present a new paradigm in modern condensed matter physics with numerous applications in photonics, biomedicine, and spintronics. They are promising for the realisation of 3D magnetic nano-networks for ultra-fast and low-energy data storage. Frustration in these systems can lead to magnetic charges or magnetic monopoles, which can function as mobile, binary information carriers. However, Dirac strings in 2D artificial spin ices bind magnetic charges, while 3D dipolar counterparts require cryogenic temperatures for their stability. Here, we present a micromagnetic study of a highly-frustrated 3D artificial spin ice harboring tension-free Dirac strings with unbound magnetic charges at room temperature. We use micromagnetic simulations to demonstrate that the mobility threshold for magnetic charges is by $\SI{2}{eV}$ lower than their unbinding energy. By applying global magnetic fields, we steer magnetic charges in a given direction omitting unintended switchings. The introduced system paves a way towards 3D magnetic networks for data transport and storage
△ Less
Submitted 18 February, 2021;
originally announced February 2021.
-
Non-planar geometrical effects on the magnetoelectrical signal in a three-dimensional nanomagnetic circuit
Authors:
Fanfan Meng,
Claire Donnelly,
Claas Abert,
Luka Skoric,
Stuart Holmes,
Zhuocong Xiao,
Jung-Wei Liao,
Peter J. Newton,
Crispin H. W. Barnes,
Dédalo Sanz-Hernández,
Aurelio Hierro-Rodriguez,
Dieter Suess,
Russell P. Cowburn,
Amalio Fernández-Pacheco
Abstract:
Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a micr…
▽ More
Expanding nanomagnetism and spintronics into three dimensions (3D) offers great opportunities for both fundamental and technological studies. However, probing the influence of complex 3D geometries on magnetoelectrical phenomena poses important experimental and theoretical challenges. In this work, we investigate the magnetoelectrical signals of a ferromagnetic 3D nanodevice integrated into a microelectronic circuit using direct-write nanofabrication. Due to the 3D vectorial nature of both electrical current and magnetisation, a complex superposition of several magnetoelectrical effects takes place. By performing electrical measurements under the application of 3D magnetic fields, in combination with macrospin simulations and finite element modelling, we disentangle the superimposed effects, finding how a 3D geometry leads to unusual angular dependences of well-known magnetotransport effects such as the anomalous Hall effect. Crucially, our analysis also reveals a strong role of the noncollinear demagnetising fields intrinsic to 3D nanostructures, which results in an angular dependent magnon magnetoresistance contributing strongly to the total magnetoelectrical signal. These findings are key to the understanding of 3D spintronic systems and underpin further fundamental and device-based studies.
△ Less
Submitted 18 November, 2020;
originally announced November 2020.
-
Chiral switching and dynamic barrier reductions in artificial square ice
Authors:
Naëmi Leo,
Matteo Pancaldi,
Sabri Koraltan,
Pedro Villalba González,
Claas Abert,
Christoph Vogler,
Florian Slanovc,
Florian Bruckner,
Paul Heistracher,
Kevin Hofhuis,
Matteo Menniti,
Dieter Suess,
Paolo Vavassori
Abstract:
Collective dynamics in lithographically-defined artificial spin ices offer profound insights into emergent correlations and phase transitions of geometrically-frustrated Ising spin systems. Their temporal and spatial evolution are often simulated using kinetic Monte Carlo simulations, which rely on the precise knowledge of the switching barriers to obtain predictive results in agreement with exper…
▽ More
Collective dynamics in lithographically-defined artificial spin ices offer profound insights into emergent correlations and phase transitions of geometrically-frustrated Ising spin systems. Their temporal and spatial evolution are often simulated using kinetic Monte Carlo simulations, which rely on the precise knowledge of the switching barriers to obtain predictive results in agreement with experimental observations. In many cases, however, the barriers are derived from simplified assumptions only, and do not take into account the full physical picture of nanomagnetic switching. Here we describe how the immediate magnetic environment of a nanomagnet reversing via quasi-coherent rotation can induce clockwise and counter-clockwise switching channels with different barrier energies. This barrier splitting for chiral reversal channels can be sizeable and, as string-method micromagnetic simulations show, is relevant for artificial spin ice systems made of both exchange -- as well as magnetostatically --dominated units. Due to the barrier splitting (and further reductions due to non-uniform reversal) transition rates can be exponentially enhanced by several orders of magnitude compared to mean-field predictions, especially in the limit of rare switching events where thermal excitation is less likely. This leads to significantly faster relaxation time scales and modified spatial correlations. Our findings are thus of integral importance to achieve realistic kinetic Monte Carlo simulations of emergent correlations in artificial spin systems, magnonic crystals, or the evolution of nanomagnetic logic circuits.
△ Less
Submitted 21 October, 2020;
originally announced October 2020.
-
Dipolar-stabilized first and second-order antiskyrmions in ferrimagnetic multilayers
Authors:
Michael Heigl,
Sabri Koraltan,
Marek Vaňatka,
Robert Kraft,
Claas Abert,
Christoph Vogler,
Anna Semisalova,
** Che,
Aladin Ullrich,
Timo Schmidt,
Julian Hintermayr,
Dirk Grundler,
Michael Farle,
Michal Urbánek,
Dieter Suess,
Manfred Albrecht
Abstract:
Skyrmions and antiskyrmions are topologically protected spin structures with opposite topological charge. Particularly in coexisting phases, these two types of magnetic quasi-particles may show fascinating physics and potential for spintronic devices. While skyrmions are observed in a wide range of materials, until now antiskyrmions were exclusive to materials with D2d symmetry. In this work, we s…
▽ More
Skyrmions and antiskyrmions are topologically protected spin structures with opposite topological charge. Particularly in coexisting phases, these two types of magnetic quasi-particles may show fascinating physics and potential for spintronic devices. While skyrmions are observed in a wide range of materials, until now antiskyrmions were exclusive to materials with D2d symmetry. In this work, we show first and second-order antiskyrmions stabilized by magnetic dipole-dipole interaction in Fe/Gd-based multilayers. We modify the magnetic properties of the multilayers by Ir insertion layers. Using Lorentz transmission electron microscopy imaging, we observe coexisting antiskyrmions, Bloch skyrmions, and type-2 bubbles and determine the range of material properties and magnetic fields where the different spin objects form and dissipate. We perform micromagnetic simulations to obtain more insight into the studied system and conclude that the reduction of saturation magnetization and uniaxial anisotropy leads to the existence of this zoo of different spin objects and that they are primarily stabilized by dipolar interaction.
△ Less
Submitted 18 February, 2021; v1 submitted 13 October, 2020;
originally announced October 2020.
-
Stochastic ferrimagnetic Landau-Lifshitz-Bloch equation for finite magnetic structures
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
Precise modeling of the magnetization dynamics of nanoparticles with finite size effects at fast varying temperatures is a computationally challenging task. Based on the Landau-Lifshitz-Bloch (LLB) equation we derive a coarse grained model for disordered ferrimagnets, which is both fast and accurate. First, we incorporate stochastic fluctuations to the existing ferrimagnetic LLB equation. Further,…
▽ More
Precise modeling of the magnetization dynamics of nanoparticles with finite size effects at fast varying temperatures is a computationally challenging task. Based on the Landau-Lifshitz-Bloch (LLB) equation we derive a coarse grained model for disordered ferrimagnets, which is both fast and accurate. First, we incorporate stochastic fluctuations to the existing ferrimagnetic LLB equation. Further, we derive a thermodynamic expression for the temperature dependent susceptibilities, which is essential to model finite size effects. Together with the zero field equilibrium magnetization the susceptibilities are used in the stochastic ferrimagnetic LLB to simulate a $5\times10$ nm$^2$ ferrimagnetic GdFeCo particle with 70 % FeCo and 30 % Gd under various external applied fields and heat pulses. The obtained trajectories agree well with those of an atomistic model, which solves the stochastic Landau-Lifshitz-Gilbert equation for each atom. Additionally, we derive an expression for the intergrain exchange field which couple the ferromagnetic sublattices of a ferrimagnet. A comparison of the magnetization dynamics obtained from this simpler model with those of the ferrimagnetic LLB equation shows a perfect agreement.
△ Less
Submitted 5 April, 2018;
originally announced April 2018.
-
Topologically Protected Vortex Structures to Realize Low-Noise Magnetic Sensors
Authors:
Dieter Suess,
Anton Bachleitner-Hofmann,
Armin Satz,
Herbert Weitensfelder,
Christoph Vogler,
Florian Bruckner,
Claas Abert,
Klemens Prügl,
Jürgen Zimmer,
Christian Huber,
Sebastian Luber,
Wolfgang Raberg,
Thomas Schrefl,
Hubert Brückl
Abstract:
Micromagnetic sensors play a major role towards the miniaturization in the industrial society. The adoption of new and emerging sensor technologies like anisotropic magnetoresistance (AMR), giant magnetoresistance (GMR) and tunnel magnetoresistance (TMR) sensors are mainly driven by their integrability and enhanced sensitivity. At the core of such sensors, a microstructured ferromagnetic thin film…
▽ More
Micromagnetic sensors play a major role towards the miniaturization in the industrial society. The adoption of new and emerging sensor technologies like anisotropic magnetoresistance (AMR), giant magnetoresistance (GMR) and tunnel magnetoresistance (TMR) sensors are mainly driven by their integrability and enhanced sensitivity. At the core of such sensors, a microstructured ferromagnetic thin film element transduces the magnetic signal. Such elements usually switch via multi-domain, C- or S-shaped magnetization states and, therefore, often exhibit an open non-linear hysteresis curve. Linearity and hysteretic effects, as well as magnetic noise are key features in the improvement of such sensors. Here, we report on the physical origin of these disturbing factors and the inherent connection of noise and hysteresis. Critical noise sources are identified by means of analytic and micromagnetic models. The dominant noise source is due to irreproducible magnetic switching of the transducer element at external fields close to the Stoner Wohlfarth switching field. Furthermore, a solution is presented to overcome these limiting factors: a disruptive sensor design is proposed and analyzed which realizes a topologically protected magnetic vortex state in the transducer element. Compared to state of the art sensors the proposed sensor layout has negligible hysteresis, a linear regime about an order of magnitude higher and lower magnetic noise making the sensor ideal candidate for applications ranging from automotive industry to biological application.
△ Less
Submitted 19 December, 2017;
originally announced December 2017.
-
A repulsive skyrmion chain as guiding track for a race track memory
Authors:
Dieter Suess,
Christoph Vogler,
Florian Bruckner,
Claas Abert
Abstract:
A skyrmion racetrack design is proposed that allows for thermally stable skyrmions to code information and dynamical pinning sites that move with the applied current. This concept solves the problem of intrinsic distributions of pinning times and pinning currents of skyrmions at static geometrical or magnetic pinning sites. The dynamical pinning sites are realized by a skyrmion carrying wire, wher…
▽ More
A skyrmion racetrack design is proposed that allows for thermally stable skyrmions to code information and dynamical pinning sites that move with the applied current. This concept solves the problem of intrinsic distributions of pinning times and pinning currents of skyrmions at static geometrical or magnetic pinning sites. The dynamical pinning sites are realized by a skyrmion carrying wire, where the skyrmion repulsion is used in order to keep the skyrmions at equal distances. The information is coded by an additional layer where the presence and absence of a skyrmion is used to code the information. The lowest energy barrier for a data loss is calculated to be DE = 55 kBT300 which is sufficient for long time thermal stability.
△ Less
Submitted 21 July, 2017;
originally announced July 2017.
-
AC noise reduction based on exchange coupled grains for heat-assisted-magnetic recording: The effect of an FeRh interlayer
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
High storage density and high data rate are two of the most desired properties of modern hard disk drives. Heat-assisted magnetic recording (HAMR) is believed to achieve both. Recording media, consisting of exchange coupled grains with a high and a low $T_{\mathrm{C}}$ part, were shown to have low DC noise, but increased AC noise, compared to hard magnetic single phase grains, like FePt [1]. In th…
▽ More
High storage density and high data rate are two of the most desired properties of modern hard disk drives. Heat-assisted magnetic recording (HAMR) is believed to achieve both. Recording media, consisting of exchange coupled grains with a high and a low $T_{\mathrm{C}}$ part, were shown to have low DC noise, but increased AC noise, compared to hard magnetic single phase grains, like FePt [1]. In this work we extensively investigate the influence of an FeRh interlayer on the magnetic noise in exchange coupled grains. We find an optimal grain design that reduces the jitter in down-track direction by up to 30 % and in off-track direction by up to 50 %, depending on the head velocity, compared to the same structures without FeRh. Further, the mechanisms causing this jitter reduction are demonstrated. Additionally, we show that for ultrashort heat pulses and low write temperatures the switching time distribution of the analyzed grain structure is reduced by a factor of four, compared to the same structure without FeRh layer. This feature could be interesting for HAMR with a pulsed laser spot and could resume the discussion about this HAMR technique.
△ Less
Submitted 7 June, 2017;
originally announced June 2017.
-
Spin Torque Efficiency and Analytic Error Rate Estimates of Skyrmion Racetrack Memory
Authors:
Dieter Suess,
Christoph Vogler,
Florian Bruckner,
F. Slanovc,
Claas Abert
Abstract:
In this paper the thermal stability of skyrmion bubbles and the critical currents to move them over pinning sites is investigated. For the used pinning geometries and the used parameters, the unexpected behavior is reported that the energy barrier to overcome the pinning site is larger than the energy barrier of the annihilation of a skyrmion. The annihilation takes place at boundaries by current…
▽ More
In this paper the thermal stability of skyrmion bubbles and the critical currents to move them over pinning sites is investigated. For the used pinning geometries and the used parameters, the unexpected behavior is reported that the energy barrier to overcome the pinning site is larger than the energy barrier of the annihilation of a skyrmion. The annihilation takes place at boundaries by current driven motion as well as due to the excitation over energy barriers, in the absence of currents, without forming Bloch points. It is reported that the pinning sites, which are required to allow thermally stable bits, significantly increase the critical current densities to move the bits in skyrmion like structures to about $j_{crit}$ = 0.62 TA/m$^2$. These currents are similar to those obtained experimentally to move stable skyrmions at room temperature. By calculating the thermal stability as well as the critical current, we can derive the spin torque efficiency $η$ = $Δ/I_c = 0.19 k_BT_{300}~/μ$A, which is in a similar range to the simulated spin torque efficiency of MRAM structures. Finally, it is shown that the stochastic depinning process of any racetrack like device requires extremely narrow depinning time distribution smaller than ~6% of the current pulse length to reach bit error rates smaller than ${10^{ - 9}}$.
△ Less
Submitted 25 September, 2018; v1 submitted 26 April, 2017;
originally announced April 2017.
-
Efficiently reducing transition curvature in heat-assisted magnetic recording with state-of-the-art write heads
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
The curvature of bit transitions on granular media is a serious problem for the read-back process. We address this fundamental issue and propose a possibility to efficiently reduce transition curvatures with state-of-the-art heat-assisted magnetic recording (HAMR) heads. We compare footprints of conventional with those of the proposed head design on different media, consisting of exchange coupled…
▽ More
The curvature of bit transitions on granular media is a serious problem for the read-back process. We address this fundamental issue and propose a possibility to efficiently reduce transition curvatures with state-of-the-art heat-assisted magnetic recording (HAMR) heads. We compare footprints of conventional with those of the proposed head design on different media, consisting of exchange coupled and single phase grains. Additionally, we investigate the impact of various recording parameters, like the full width at half maximum (FWHM) of the applied heat pulse and the coercivity gradient near the write temperature of the recording grains. The footprints are calculated with a coarse grained model, based on the Landau-Lifshitz-Bloch (LLB) equation. The presented simulations show a transition curvature reduction of up to 40 %, in the case of a medium with exchange coupled grains and a heat pulse with a FWHM of 40 nm. We further give the reason for the straightening of the bit transitions, by means of basic considerations with regard to the effective recording time window (ERTW) of the write process. Besides the transition curvature reduction the proposed head design yields an improvement of the transition jitter in both down-track and off-track direction.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Back hop** in spin-transfer-torque devices, possible origin and counter measures
Authors:
Claas Abert,
Hossein Sepehri-Amin,
Florian Bruckner,
Christoph Vogler,
Masamitsu Hayashi,
Dieter Suess
Abstract:
The effect of undesirable high-frequency free-layer switching in magnetic multilayer systems, referred to as back hop**, is investigated by means of the spin-diffusion model. A possible origin of the back-hop** effect is found to be the destabilization of the pinned layer which leads to perpetual switching of both layers. The influence of different material parameters on the critical switching…
▽ More
The effect of undesirable high-frequency free-layer switching in magnetic multilayer systems, referred to as back hop**, is investigated by means of the spin-diffusion model. A possible origin of the back-hop** effect is found to be the destabilization of the pinned layer which leads to perpetual switching of both layers. The influence of different material parameters on the critical switching currents for the free and pinned layer is obtained by micromagnetic simulations. It is found that the choice of a free-layer material with low polarization $β$ and saturation magnetization $M_s$, and a pinned-layer material with high $β$ and $M_s$ leads to a low free-layer critical current and a high pinned-layer critical current and hence reduces the likelihood of back hop**. While back hop** was observed in various types of devices, there are only few experiments that exhibit this effect in perpendicularly magnetized systems. However, our simulations suggest, that this is likely to change due to loss of pinned-layer anisotropy when decreasing device sizes.
△ Less
Submitted 9 June, 2017; v1 submitted 21 February, 2017;
originally announced February 2017.
-
Topology Optimized and 3D Printed Polymer Bonded Permanent Magnets for a Predefined External Field
Authors:
Christian Huber,
Claas Abert,
Florian Bruckner,
Martin Groenefeld,
Iulian Teliban,
Christoph Vogler,
Dieter Suess
Abstract:
Topology optimization offers great opportunities to design permanent magnetic systems that have specific external field characteristics. Additive manufacturing of polymer bonded magnets with an end-user 3D printer can be used to manufacture permanent magnets with structures that have been difficult or impossible to manufacture previously. This work combines these two powerful methods to design and…
▽ More
Topology optimization offers great opportunities to design permanent magnetic systems that have specific external field characteristics. Additive manufacturing of polymer bonded magnets with an end-user 3D printer can be used to manufacture permanent magnets with structures that have been difficult or impossible to manufacture previously. This work combines these two powerful methods to design and manufacture permanent magnetic system with specific properties. The topology optimization framework is simple, fast, and accurate. It can be also used for reverse engineering of permanent magnets in order to find the topology from field measurements. Furthermore, a magnetic system that generate a linear external field above the magnet is presented. With a volume constraint the amount of magnetic material can be minimized without losing performance. Simulations and measurements of the printed system show a very good agreement.
△ Less
Submitted 7 February, 2017;
originally announced February 2017.
-
Significant reduction of critical currents in MRAM designs using dual free layer with perpendicular and in-plane anisotropy
Authors:
Dieter Suess,
Christoph Vogler,
Florian Bruckner,
Hossein Sepehri-Amin,
Claas Abert
Abstract:
One essential feature in MRAM cells is the spin torque efficiency, which describes the ratio of the critical switching current to the energy barrier. Within this paper it is reported that the spin torque efficiency can be improved by a factor of 3.2 by the use a of dual free layer device, which consists of one layer with perpendicular crystalline anisotropy and a second layer with in-plane crystal…
▽ More
One essential feature in MRAM cells is the spin torque efficiency, which describes the ratio of the critical switching current to the energy barrier. Within this paper it is reported that the spin torque efficiency can be improved by a factor of 3.2 by the use a of dual free layer device, which consists of one layer with perpendicular crystalline anisotropy and a second layer with in-plane crystalline anisotropy. Detailed simulations solving the spin transport equations simultaneously with the micromagnetics equation were performed in order to understand the origin of the switching current reduction by a factor of 4 for the dual layer structure compared to a single layer structure. The main reason could be attributed to an increased spin accumulation within the free layer due to the dynamical tilting of the magnetization within the in-plane region of the dual free layer.
△ Less
Submitted 14 February, 2017; v1 submitted 3 February, 2017;
originally announced February 2017.
-
3D Printing of Polymer Bonded Rare-Earth Magnets With a Variable Magnetic Compound Density for a Predefined Stray Field
Authors:
Christian Huber,
Claas Abert,
Florian Bruckner,
Martin Groenefeld,
Stephan Schuschnigg,
Iulian Teliban,
Christoph Vogler,
Gregor Wautischer,
Roman Windl,
Dieter Suess
Abstract:
Additive manufacturing of polymer bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also new possibilities to create a specific stray field around the magnet are triggered. The current work presents a method to 3D print polymer bonded magnets with a variable magnetic compound density distribution. A…
▽ More
Additive manufacturing of polymer bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also new possibilities to create a specific stray field around the magnet are triggered. The current work presents a method to 3D print polymer bonded magnets with a variable magnetic compound density distribution. A low-cost, end-user 3D printer with a mixing extruder is used to mix permanent magnetic filaments with pure PA12 filaments. The magnetic filaments are compounded, extruded, and characterized for the printing process. To deduce the quality of the manufactured magnets with a variable compound density, an inverse stray field framework is used. The effectiveness of the printing process and the simulation method is shown. It can also be used to manufacture magnets that produce a predefined stray field in a given region. Examples for sensor applications are presented. This setup and simulation framework allows the design and manufacturing of polymer bonded permanent magnets which are impossible to create with conventional methods.
△ Less
Submitted 26 January, 2017;
originally announced January 2017.
-
Field- and dam**-like spin-transfer torque in magnetic multilayers
Authors:
Claas Abert,
Hossein Sepehri-Amin,
Florian Bruckner,
Christoph Vogler,
Masamitsu Hayashi,
Dieter Suess
Abstract:
We investigate the spin-transfer torque in a magnetic multilayer structure by means of a spin-diffusion model. The torque in the considered system, consisting of two magnetic layers separated by a conducting layer, is caused by a perpendicular-to-plane current. We compute the strength of the field-like and the dam**-like torque for different material parameters and geometries. Our studies sugges…
▽ More
We investigate the spin-transfer torque in a magnetic multilayer structure by means of a spin-diffusion model. The torque in the considered system, consisting of two magnetic layers separated by a conducting layer, is caused by a perpendicular-to-plane current. We compute the strength of the field-like and the dam**-like torque for different material parameters and geometries. Our studies suggest that the field-like torque highly depends on the exchange coupling strength of the itinerant electrons with the magnetization both in the pinned and the free layer. While a low coupling leads to very high field-like torques, a high coupling leads to low or even negative field-like torques. The dependence of the different torque terms on system parameters is considered very important for the development of applications such as STT MRAM and spin-torque oscillators.
△ Less
Submitted 1 December, 2016;
originally announced December 2016.
-
Influence of grain size and exchange interaction on the LLB modeling procedure
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess,
Dirk Praetorius
Abstract:
Reliably predicting bit-error rates in realistic heat-assisted magnetic recording simulations is a challenging task. Integrating the Landau-Lifshitz-Bloch (LLB) equation can reduce the computational effort to determine the magnetization dynamics in the vicinity of the Curie temperature. If one aims that these dynamics coincide with trajectories calculated from the atomistic Landau-Lifshitz-Gilbert…
▽ More
Reliably predicting bit-error rates in realistic heat-assisted magnetic recording simulations is a challenging task. Integrating the Landau-Lifshitz-Bloch (LLB) equation can reduce the computational effort to determine the magnetization dynamics in the vicinity of the Curie temperature. If one aims that these dynamics coincide with trajectories calculated from the atomistic Landau-Lifshitz-Gilbert equation, one has to carefully model required temperature dependent material functions such as the zero-field equilibrium magnetization as well as the parallel and normal susceptibilities. We present an extensive study on how these functions depend on grain size and exchange interactions. We show that, if the size or the exchange constant of a reference grain is modified, the material functions can be scaled, according to the changed Curie temperature, yielding negligible errors. This is shown to be valid for volume changes of up to $\pm 40$ % and variations of the exchange constant of up to $\pm10$ %. Besides the temperature dependent material curves, computed switching probabilities also agree well with probabilities separately determined for each system. Our study suggest that there is no need to recalculate the required LLB input functions for each particle. Within the presented limits it is sufficient to scale them to the Curie temperature of the altered system.
△ Less
Submitted 15 July, 2016;
originally announced July 2016.
-
Basic noise mechanisms of heat-assisted-magnetic recording
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess,
Dirk Praetorius
Abstract:
Heat-assisted magnetic recording (HAMR) is expected to be a key technology to significantly increase the areal storage density of magnetic recording devices. At high temperatures thermally induced noise becomes a major problem, which must be overcome in order to reliably write magnetic bits with narrow transitions. We propose an elementary model based on the effective recording time window (ERTW)…
▽ More
Heat-assisted magnetic recording (HAMR) is expected to be a key technology to significantly increase the areal storage density of magnetic recording devices. At high temperatures thermally induced noise becomes a major problem, which must be overcome in order to reliably write magnetic bits with narrow transitions. We propose an elementary model based on the effective recording time window (ERTW) to compute the switching probability of bits during HARM of bit-patterned media. With few assumptions this analytical model allows to gain deeper insights into the basic noise mechanisms like AC and DC noise. Finally, we discuss strategies to reduce noise and to increase the areal storage density of both bit-patterned as well as granular media.
△ Less
Submitted 30 April, 2016;
originally announced May 2016.
-
A self-consistent spin-diffusion model for micromagnetics
Authors:
Claas Abert,
Michele Ruggeri,
Florian Bruckner,
Christoph Vogler,
Aurelien Manchon,
Dirk Praetorius,
Dieter Suess
Abstract:
We propose a three-dimensional micromagnetic model that dynamically solves the Landau-Lifshitz-Gilbert equation coupled to the full spin-diffusion equation. In contrast to previous methods, we solve for the magnetization dynamics and the electric potential in a self-consistent fashion. This treatment allows for an accurate description of magnetization dependent resistance changes. Moreover, the pr…
▽ More
We propose a three-dimensional micromagnetic model that dynamically solves the Landau-Lifshitz-Gilbert equation coupled to the full spin-diffusion equation. In contrast to previous methods, we solve for the magnetization dynamics and the electric potential in a self-consistent fashion. This treatment allows for an accurate description of magnetization dependent resistance changes. Moreover, the presented algorithm describes both spin accumulation due to smooth magnetization transitions and due to material interfaces as in multilayer structures. The model and its finite-element implementation are validated by current driven motion of a magnetic vortex structure. In a second experiment, the resistivity of a magnetic multilayer structure in dependence of the tilting angle of the magnetization in the different layers is investigated. Both examples show good agreement with reference simulations and experiments respectively.
△ Less
Submitted 16 September, 2016; v1 submitted 17 December, 2015;
originally announced December 2015.
-
Areal density optimizations for heat-assisted-magnetic recording of high density bit-patterned media
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess,
Dirk Praetorius
Abstract:
Heat-assisted-magnetic recording (HAMR) is hoped to be the future recording technique for high density storage devices. Nevertheless, there exist several realizations strategies. With a coarse-grained Landau-Lifshitz-Bloch (LLB) model we investigate in detail benefits and disadvantages of continuous and pulsed laser spot recording of shingled and conventional bit-patterned media. Additionally we c…
▽ More
Heat-assisted-magnetic recording (HAMR) is hoped to be the future recording technique for high density storage devices. Nevertheless, there exist several realizations strategies. With a coarse-grained Landau-Lifshitz-Bloch (LLB) model we investigate in detail benefits and disadvantages of continuous and pulsed laser spot recording of shingled and conventional bit-patterned media. Additionally we compare single phase grains and bits having a bilayer structure with graded Curie temperature, consisting of a hard magnetic layer with high $T_{\mathrm{C}}$ and a soft magnetic one with low $T_{\mathrm{C}}$, respectively. To describe the whole write process as realistic as possible a distribution of the grain sizes and Curie temperatures, a displacement jitter of the head and the bit positions are considered. For all these cases we calculate bit error rates of various grain patterns, temperatures and write head positions to optimize the achievable areal storage density. Within our analysis shingled HAMR with a continuous laser pulse moving over the medium reaches the best results, and thus having the highest potential to become the next generation storage device.
△ Less
Submitted 11 December, 2015;
originally announced December 2015.
-
Superior bit error rate and jitter due to improved switching field distribution in exchange spring magnetic recording
Authors:
Dieter Suess,
Markus Fuger,
Claas Abert,
Florian Bruckner,
Roman Windl,
Pietro Palmesi,
Anton Buder,
Christoph Vogler
Abstract:
We report two effects that lead to a reduction of the switching field distribution in exchange spring media. The first effect relies on a subtle mechanism of the interplay between exchange coupling between soft and hard layers and anisotropy that allows significant reduction of the switching field distribution in exchange spring media. This effect reduces the switching field distribution by about…
▽ More
We report two effects that lead to a reduction of the switching field distribution in exchange spring media. The first effect relies on a subtle mechanism of the interplay between exchange coupling between soft and hard layers and anisotropy that allows significant reduction of the switching field distribution in exchange spring media. This effect reduces the switching field distribution by about 30% compared to single-phase media. A second effect is that due to the improved thermal stability of exchange spring media over single-phase media, thermal fluctuation leads to reduced fundamental transition jitter. The influence of this overall improved switching field distribution on the transition jitter in granular recording and the bit error rate in bit-patterned magnetic recording is discussed. The transition jitter in granular recording for a distribution of K1 values of 3% in the hard layer, taking into account thermal fluctuations during recording, is estimated to be a = 0.78 nm, which is similar to the best reported calculated jitter in optimized heat-assisted recording media.
△ Less
Submitted 15 October, 2015;
originally announced October 2015.
-
Heat assisted magnetic recording of bit patterned media beyond 10 Tb/in$^2$
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess,
Dirk Praetorius
Abstract:
The limits of the areal storage density as can be achieved with heat assisted magnetic recording (HAMR) are still an open issue. We want to address this central question and present the design of a possible bit patterned medium with an areal storage density above 10 Tb/in$^2$. The model uses hard magnetic recording grains with 5 nm diameter and 10 nm height. It assumes a realistic distribution of…
▽ More
The limits of the areal storage density as can be achieved with heat assisted magnetic recording (HAMR) are still an open issue. We want to address this central question and present the design of a possible bit patterned medium with an areal storage density above 10 Tb/in$^2$. The model uses hard magnetic recording grains with 5 nm diameter and 10 nm height. It assumes a realistic distribution of the Curie temperature of the underlying material as well as a realistic distribution of the grain size and the grain position. In order to compute the areal density we analyze the detailed switching behavior of a recording bit under different external conditions, which allows to compute the bit error rate of a recording process (shingled and conventional) for different grain spacings and write head positions. Hence, we are able to optimize the areal density of the presented medium.
△ Less
Submitted 15 October, 2015; v1 submitted 8 October, 2015;
originally announced October 2015.
-
Macroscopic Simulation of Isotropic Permanent Magnets
Authors:
Florian Bruckner,
Claas Abert,
Christoph Vogler,
Frank Heinrichs,
Armin Satz,
Udo Ausserlechner,
Gernot Binder,
Helmut Koeck,
Dieter Suess
Abstract:
Accurate simulations of isotropic permanent magnets require to take the magnetization process into account and consider the anisotropic, nonlinear, and hysteretic material behaviour near the saturation configuration. An efficient method for the solution of the magnetostatic Maxwell equations including the description of isotropic permanent magnets is presented. The algorithm can easily be implemen…
▽ More
Accurate simulations of isotropic permanent magnets require to take the magnetization process into account and consider the anisotropic, nonlinear, and hysteretic material behaviour near the saturation configuration. An efficient method for the solution of the magnetostatic Maxwell equations including the description of isotropic permanent magnets is presented. The algorithm can easily be implemented on top of existing finite element methods and does not require a full characterization of the hysteresis of the magnetic material. Strayfield measurements of an isotropic permanent magnet and simulation results are in good agreement and highlight the importance of a proper description of the isotropic material.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
Fundamental limits in heat assisted magnetic recording and methods to overcome it with exchange spring structures
Authors:
Dieter Suess,
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Roman Windl,
Leoni Breth
Abstract:
The switching probability of magnetic elements for heat assisted recording is investigated. It is found that FePt elements with a diameter of 5 nm and a height of 10nm show, at a field of 0.5 T, thermally written in errors of 12 percent, which is significant too large for bit patterned magnetic recording. Thermally written in errors can be decreased if larger head fields are applied. However, larg…
▽ More
The switching probability of magnetic elements for heat assisted recording is investigated. It is found that FePt elements with a diameter of 5 nm and a height of 10nm show, at a field of 0.5 T, thermally written in errors of 12 percent, which is significant too large for bit patterned magnetic recording. Thermally written in errors can be decreased if larger head fields are applied. However, larger fields lead to an increase the fundamental thermal jitter. This leads to a dilemma between thermally written in errors and fundamental thermal jitter. This dilemma can be partly relaxed by increasing the thickness of the FePt film up to 30nm. For realistic head fields, it is found that the fundamental thermal jitter is in the same order of magnitude of the fundamental thermal jitter in conventional recording, which is about 0.5 to 0.8 nm. Composite structures consisting of high Curie top layer and FePt as hard magnetic storage layer can reduce the thermally written in errors to be smaller than 10-4 if the dam** constant is increased in the soft layer. Large dam** may be realized by do** with rare earth elements. Similar to single FePt grains also in composite structure an increase of switching probability is sacrifices by an increase of thermal jitter. Structures utilizing first order phase transitions breaking the thermal jitter and writeability dilemma are discussed.
△ Less
Submitted 11 November, 2014;
originally announced November 2014.
-
A three-dimensional spin-diffusion model for micromagnetics
Authors:
Claas Abert,
Michele Ruggeri,
Florian Bruckner,
Christoph Vogler,
Gino Hrkac,
Dirk Praetorius,
Dieter Suess
Abstract:
We implement a finite-element scheme that solves the Landau-Lifshitz-Gilbert equation coupled to a diffusion equation accounting for spin-polarized currents. The latter solves for the spin accumulation not only in magnetic materials but also in nonmagnetic conductors. The presented method incorporates the model by Slonczewski for the description of spin torque in magnetic multilayers as well as th…
▽ More
We implement a finite-element scheme that solves the Landau-Lifshitz-Gilbert equation coupled to a diffusion equation accounting for spin-polarized currents. The latter solves for the spin accumulation not only in magnetic materials but also in nonmagnetic conductors. The presented method incorporates the model by Slonczewski for the description of spin torque in magnetic multilayers as well as the model of Zhang and Li for the description of current driven domain-wall motion. Furthermore it is able to do both resolve the time evolution of the spin accumulation or treat it in an adiabatic fashion by the choice of sufficiently large time steps.
△ Less
Submitted 18 May, 2015; v1 submitted 22 October, 2014;
originally announced October 2014.
-
Landau-Lifshitz-Bloch equation for exchange coupled grains
Authors:
Christoph Vogler,
Claas Abert,
Florian Bruckner,
Dieter Suess
Abstract:
Heat assisted recording is a promising technique to further increase the storage density in hard disks. Multilayer recording grains with graded Curie temperature is discussed to further assist the write process. Describing the correct magnetization dynamics of these grains, from room temperature to far above the Curie point, during a write process is required for the calculation of bit error rates…
▽ More
Heat assisted recording is a promising technique to further increase the storage density in hard disks. Multilayer recording grains with graded Curie temperature is discussed to further assist the write process. Describing the correct magnetization dynamics of these grains, from room temperature to far above the Curie point, during a write process is required for the calculation of bit error rates. We present a coarse grained approach based on the Landau-Lifshitz-Bloch (LLB) equation to model exchange coupled grains with low computational effort. The required temperature dependent material properties such as the zero-field equilibrium magnetization as well as the parallel and normal susceptibilities are obtained by atomistic Landau-Lifshitz-Gilbert (LLG) simulations. Each grain is described with one magnetization vector. In order to mimic the atomistic exchange interaction between the grains a special treatment of the exchange field in the coarse grained approach is presented.
△ Less
Submitted 27 October, 2014; v1 submitted 22 October, 2014;
originally announced October 2014.