-
Guided vortex motion in a ferromagnet-superconductor bilayer
Authors:
P Gierlowski,
I Abaloszewa,
P Przyslupski,
G Jung
Abstract:
Vortex motion in ferromagnetic-superconducting bilayers constituted by thin YBa$_2$Cu$_3$O$_{7-δ}$ film deposited on the top of thin manganite La$_{0.67}$Sr$_{0.33}$MnO$_3$ film has been investigated. Both films were deposited on uniformly twinned single-crystalline substrates and patterned into strips directed at different angles to the twin lines pattern. These conditions lead to the guided vort…
▽ More
Vortex motion in ferromagnetic-superconducting bilayers constituted by thin YBa$_2$Cu$_3$O$_{7-δ}$ film deposited on the top of thin manganite La$_{0.67}$Sr$_{0.33}$MnO$_3$ film has been investigated. Both films were deposited on uniformly twinned single-crystalline substrates and patterned into strips directed at different angles to the twin lines pattern. These conditions lead to the guided vortex motion at different angles to the periodic pinning potential. It has been established that critical current and flux flow resistance in such an anisotropic pinning landscape-scale follow the elliptic dependence on the angle of the direction of the strip. For vortex flow at the directions close to the perpendicular to magnetic domain walls, signatures of the coherence in the vortex motion have been observed.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
London penetration depth of electron-irradiated Ba1-xKxFe2As2 single-crystals
Authors:
P. Gierlowski,
B. Cury Camargo,
I. Abaloszewa,
A. Abaloszew,
M. Jaworski,
K. Cho,
R. Prozorov,
M. Konczykowski
Abstract:
We have characterized an electron-irradiated Ba1-xKxFe2As2 (x = 0.53) single-crystal using two different experimental techniques: magneto-optic measurements and microwave measurements. The crystal has been measured before as well as after the 2.5 MeV electron irradiation process. After irradiation it was annealed in a number of steps, between 90 deg C and 180 deg C, and measured after each anneali…
▽ More
We have characterized an electron-irradiated Ba1-xKxFe2As2 (x = 0.53) single-crystal using two different experimental techniques: magneto-optic measurements and microwave measurements. The crystal has been measured before as well as after the 2.5 MeV electron irradiation process. After irradiation it was annealed in a number of steps, between 90 deg C and 180 deg C, and measured after each annealing step. Most microwave measurements were performed by means of a copper cavity, taking advantage of the TE011 and TM110 modes, allowing for the determination of the London penetration depths changes δλab(T) and δλc(T), i.e. perpendicular and parallel to the sample c-axis. Appropriate equations, based on perturbation theory, were derived to calculate the penetration depths changes δλab and δλc for a rectangular prism geometry. The sample showed a full recovery of its Tc, however the observed behavior of δλc and δλab was not monotonic vs annealing temperature, displaying a minimum of δλc and δλab at 120 deg C. This finding was confirmed by magneto-optic measurements, where besides verifying the sample uniformity and the absence of visible defects, the lower critical field Hc1 of the Ba1-xKxFe2As2 single-crystal was obtained and the London penetration depth λab(0) was calculated.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Thermomagnetic instabilities in Nb films deposited on glass substrates
Authors:
I. Abaloszewa,
M. Z. Cieplak,
A. Abaloszew
Abstract:
In this work, we provide a systematic study of the magnetic field penetration process and avalanche formation in niobium films of different thicknesses deposited on glass substrates. The research was carried out by means of direct visualization of the magnetic flux using magneto-optical imaging. The experimental data were compared with theoretical predictions for the development of thermomagnetic…
▽ More
In this work, we provide a systematic study of the magnetic field penetration process and avalanche formation in niobium films of different thicknesses deposited on glass substrates. The research was carried out by means of direct visualization of the magnetic flux using magneto-optical imaging. The experimental data were compared with theoretical predictions for the development of thermomagnetic instabilities in the form of finger or dendritic flux avalanches in thin films. Analysis of the temperature and thickness dependence of threshold magnetic field at which superconductor first becomes unstable, as well as the flux penetration depth corresponding to this field allows the evaluation of the thermal and superconducting parameters of the studied films, such as heat transfer coefficient across the film-substrate boundary, thermal conductivity, critical current density.
△ Less
Submitted 26 July, 2022;
originally announced July 2022.
-
Systemic Consequences of Disorder in Magnetically Self-Organized Topological MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$ Superlattices
Authors:
Joanna Sitnicka,
Kyungwha Park,
Paweł Skupiński,
Krzysztof Grasza,
Anna Reszka,
Kamil Sobczak,
Jolanta Borysiuk,
Zbigniew Adamus,
Mateusz Tokarczyk,
Andrei Avdonin,
Irina Fedorchenko,
Irina Abaloszewa,
Sylwia Turczyniak-Surdacka,
Natalia Olszowska,
Jacek Kolodziej,
Bogdan J. Kowalski,
Haiming Deng,
Marcin Konczykowski,
Lia Krusin-Elbaum,
Agnieszka Wolos
Abstract:
MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$ materials system has recently generated strong interest as a natural platform for realization of the quantum anomalous Hall (QAH) state. The system is magnetically much better ordered than substitutionally doped materials, however, the detrimental effects of certain disorders are becoming increasingly acknowledged. Here, from compiling structural, compos…
▽ More
MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$ materials system has recently generated strong interest as a natural platform for realization of the quantum anomalous Hall (QAH) state. The system is magnetically much better ordered than substitutionally doped materials, however, the detrimental effects of certain disorders are becoming increasingly acknowledged. Here, from compiling structural, compositional, and magnetic metrics of disorder in ferromagnetic MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$ it is found that migration of Mn between MnBi$_{2}$T$e_{4}$ septuple layers (SLs) and otherwise non-magnetic Bi$_{2}$Te$_{3}$ quintuple layers (QLs) has systemic consequences - it induces ferromagnetic coupling of Mn-depleted SLs with Mn-doped QLs, seen in ferromagnetic resonance as an acoustic and optical resonance mode of the two coupled spin subsystems. Even for a large SL separation (n $\gtrsim$ 4 QLs) the structure cannot be considered as a stack of uncoupled two-dimensional layers. Angle-resolved photoemission spectroscopy and density functional theory studies show that Mn disorder within an SL causes delocalization of electron wavefunctions and a change of the surface bandstructure as compared to the ideal MnBi$_{2}$Te$_{4}/$(Bi$_{2}$Te$_{3}$)$_{n}$. These findings highlight the critical importance of inter- and intra-SL disorder towards achieving new QAH platforms as well as exploring novel axion physics in intrinsic topological magnets.
△ Less
Submitted 9 September, 2021; v1 submitted 31 August, 2021;
originally announced September 2021.
-
Properties of YBa$_2$Cu$_3$O$_{7-δ}$ films grown by pulsed laser deposition on CeO$_2$-buffered sapphire
Authors:
I. Abaloszewa,
P. Gierłowski,
A. Abaloszew,
I. Zaytseva,
M. Aleszkiewicz,
Y. Syryanyy,
V. Bezusyy,
A. Malinowski,
M. Z. Cieplak,
M. Jaworski,
M. Konczykowski,
A. Abramowicz,
S. Chromik,
E. Dobrocka
Abstract:
In the present work we study the growth by pulsed laser deposition of YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films on the r-cut sapphire substrates. To improve the matching of the lattice parameters between the substrate and the film we use CeO$_{2}$ buffer layer, recrystallized prior to the deposition of YBCO. The optimal thickness and temperature of recrystallization of the buffer layer is first determin…
▽ More
In the present work we study the growth by pulsed laser deposition of YBa$_2$Cu$_3$O$_{7-δ}$ (YBCO) films on the r-cut sapphire substrates. To improve the matching of the lattice parameters between the substrate and the film we use CeO$_{2}$ buffer layer, recrystallized prior to the deposition of YBCO. The optimal thickness and temperature of recrystallization of the buffer layer is first determined using atomic force microscopy (AFM) and X-ray diffraction. Next, we use the AFM to examine the dependence of YBCO film roughness on the film thickness, and we study the homogeneity of magnetic flux penetration into the films by magneto-optical imaging. We find that the superconducting critical temperature and critical current density of these films are very similar to those of YBCO films grown on well-matched substrates. It appears that the microstructure of YBCO films is affected by structural defects in the buffer layer as well as variations in oxygen deficiency, which results in high values of critical current density suitable for application.
△ Less
Submitted 17 November, 2020;
originally announced November 2020.